Yamaha GX707 Manuale utente

Categoria
Lettore CD
Tipo
Manuale utente

Questo manuale è adatto anche per

UCA
DISC
3
OPEN
/
CLOSE
DISC CHANGE
DISC
2
DISC
1
3–DISC CD CHANGER
STANDBY
/
ON
STANDBY
TIMER
PROGRAM B.BOOST MUSIC
INPUT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
VOLUME
UP
DOWN
DIRECTION
AUTO REVERSE CASSETTE DECK
MINI COMPONENT SYSTEM GX
707
DOLBY B NR
OPEN
/
CLOSE
DOLBY SURROUND
PRO•LOGIC
DIGITAL AUDIO
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT
Please record the serial number of this system in the space
below.
Model:
Serial No.:
The serial number is located on the rear of the main unit.
Retain this Owner’s Manual in a safe place for future
reference.
SAFETY INSTRUCTIONS
1 Read Instructions – All the safety and operating
instructions should be read before the unit is
operated.
2 Retain Instructions – The safety and operating
instructions should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other
instructions should be followed.
5 Water and Moisture – The unit should not be used
near water – for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near
a swimming pool, etc.
6 Carts and Stands – The unit should be used only with
a cart or stand that is recommended by the
manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the unit and cart combination
to overturn.
7 Wall or Ceiling Mounting – The unit should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
8 Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be
situated on a bed, sofa, rug, or similar surface, that
may block the ventilation openings; or placed in a
built-in installation, such as a bookcase or cabinet
that may impede the flow of air through the
ventilation openings.
9 Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances
that produce heat.
10 Power Sources – The unit should be connected to a
power supply only of the type described in the
operating instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should
be routed so that they are not likely to be walked on
or pinched by items placed upon or against them,
paying particular attention to cords at plugs,
convenience receptacles, and the point where they
exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should
be unplugged from the outlet when left unused for a
long period of time.
14 Object and Liquid Entry – Care should be taken so
that objects do not fall into and liquids are not spilled
into the inside of the unit.
15 Damage Requiring Service – The unit should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet
damaged.
16 Servicing – The user should not attempt to service the
unit beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be
taken so that the grounding or polarization is not
defeated.
19 For US customers only:
Outdoor Antenna Grounding – If an outside antenna
is connected to this unit, be sure the antenna system
is grounded so as to provide some protection against
voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding
of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING
MAST
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC
– NATIONAL ELECTRICAL CODE
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE : DO NOT MODIFY
THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly
approved by Yamaha may void your authority,
granted by the FCC, to use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could
void your FCC authorization to use this product in
the USA.
3. NOTE : This product has been tested and found
to comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result
in harmful interference with other electronic
devices.
This equipment generates/uses radio frequencies
and, if not installed and used according to the
instructions found in the users manual, may cause
interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not
guarantee that interference will not occur in all
installations. If this product is found to be the
source of interference, which can be determined
by turning the unit “OFF” and “ON”, please try to
eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is
being affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/s.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300
ohm ribbon lead, change the lead-in to coaxial
type cable.
If these corrective measures do not produce
satisfactory results, please contact the local
retailer authorized to distribute this type of
product. If you can not locate the appropriate
retailer, please contact Yamaha Electronics Corp.,
U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those
products distributed by Yamaha Corporation of
America or its subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.
Unpacking After unpacking, check that the following parts are contained.
Déballage Après le déballage, vérifier que les pièces suivantes sont incluses.
Main unit
Appareil principal
Remote control
Télécommande
Batteries (size AA, UM/SUM-3, R6, HP-7)
Piles (format AA, UM/SUM-3, R6, HP-7)
Mounting brackets
Supports de montage
Screws
Vis
Velcro strips
Bandes Velcro
Front speakers
Enceintes avant
Indoor FM antenna
Antenne intérieure FM
AM loop antenna
Antenne-cadre AM
Speaker cords
Câbles d'enceintes
Rear speakers
Enceintes arrière
Center speaker
Enceinte centrale
DISC3
OPEN
/
CLOSE
DISC CHANGE
DISC2DISC1
3–DISC CD CHANGER
STANDBY
/
ON
STANDBY
TIMER
PROGRAM B.BOOST MUSIC
INPUT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
VOLUME
UP
DOWN
DIRECTION
AUTO REVERSE CASSETTE DECK
MINI COMPONENT SYSTEM GX
707
DOLBY B NR
OPEN
/
CLOSE
DOLBY SURROUND
PRO•LOGIC
DIGITAL AUDIO
POWER
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
0
PRESET
TUNER
+
I0
PRESET
TIME
A
PROG
B
R.TIME
C
EDIT
D
DISC SKIP
MODE
E
CD
/
DIRECTION
LEVEL
REC
/
PAUSE
TEST
PROGRAM
CENTER
/
REAR
/
DELAY
MUSIC
SLEEP
INPUT
TAPE
VOLUME
Setting this system Installation de ce système
English
Set this system by allowing enough spaces around and behind the main unit to assure good ventilation. Be sure not to place
another unit or any object on top of the main unit to prevent the ventilation holes from being obstructed. Otherwise, it may
cause fire or damage to the main unit.
Caution
When placing the speakers apart from the main unit, be sure to allow spaces of at least 20 cm (3-15/16”) above, behind and
on both sides of the main unit. If the main unit is put inside a rack, the front of it must be fully opened.
Français
Installer ce système en laissant assez d’espace autour et derrière l’appareil principal pour assurer une bonne ventilation.
Veiller à ne pas empiler un autre appareil ou un autre objet sur l’appareil principal afin de ne pas boucher les orifices de
ventilation. Sinon, on risquerait de provoquer un incendie ou d’endommager l’appareil principal.
Attention
Lorsqu’on place les enceintes à une certaine distance de l’appareil principal, veiller à laisser un espace d’au moins 20 cm
au-dessus, derrière et sur les deux côtés de l’appareil principal. Si l’on place l’appareil principal dans un meuble, veiller à ce
que le côté avant du meuble soit grand ouvert.
1 cm 1 cm
20 cm20 cm
20 cm
20 cm
20 cm
20 cm 20 cm
20 cm
DISC3
OPEN
/
CLOSE
DISC CHANGE
DISC2DISC1
3–DISC CD CHANGER
STANDBY
/
ON
STANDBY
TIMER
PROGRAM
B.BOOST MUSIC
INPUT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
VOLUME
UP
DOWN
DIRECTION
AUTO REVERSE CASSETTE DECK
MINI COMPONENT SYSTEM GX
707
DOLBY B NR
OPEN
/
CLOSE
DIGITAL AUDIO
DISC3
OPEN
/
CLOSE
DISC CHANGE
DISC2DISC1
3–DISC CD CHANGER
STANDBY
/
ON
STANDBY
TIMER
PROGRAM
B.BOOST MUSIC
INPUT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
VOLUME
UP
DOWN
DIRECTION
AUTO REVERSE CASSETTE DECK
MINI COMPONENT SYSTEM GX
707
DOLBY B NR
OPEN
/
CLOSE
DIGITAL AUDIO
Front panel
Front panel Panneau avant
DISC 3
OPEN
/
CLOSE
DISC CHANGE
DISC 2DISC 1
3–DISC CD CHANGER
STANDBY
/
ON
STANDBY
TIMER
PROGRAM
B.BOOST MUSIC
INPUT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
VOLUME
UP
DOWN
DIRECTION
AUTO REVERSE CASSETTE DECK
DOLBY B NR
OPEN
/
CLOSE
PHONES
BASS TREBLE
MODE DOLBY NR
REC
/
PAUSE
AUTO
/
MANUAL
TIMER
MEMORY
TIME ADJ
RANDOM
HOUR
REPEAT
TIME DISPLAY
MIN
DIGITAL AUDIO
1
3
4
5
6
7
8
9
C
D
E
H
2
I
J
K
W
Z
\
LM NO
0, P
F, S
G, U
T
X
V
[
Y
]
`
Q, A
R, B
1 Display
Panneau d'affichage
2 Remote control sensor
Capteur de télécommande
3 TIMER
4 STANDBY [p. 13]
5 B. BOOST [p. 32]
6 PROGRAM [p. 35]
7 PHONES [p. 33]
Amplifier/tuner Amplificateur/tuner
8 BASS/TREBLE [p. 32]
9 Front cover
Couvercle avant
0 / [p. 20, 22]
A A/B/C/D/E [p. 22]
B PRESET/TUNING/BAND
[p. 20]
C VOLUME [p. 32]
D MUSIC [p. 33]
E INPUT( / ) [p. 13, 20,
24, 26]
TUNER TAPE CD
↑↓
AUX/MD VCR VIDEO
F HOUR [p. 10, 37]
G MIN [p. 10, 37]
H DISPLAY [p. 10, 37]
I MEMORY [p. 21, 22]
TIME ADJ [p. 10]
J STANDBY/ON [p. 13]
K AUTO/MANUAL [p. 20]
TIMER [p. 37, 38]
L Disc tray
Plateau de disque
[p. 13]
M DISC (1, 2, 3) [p. 14]
N DISC CHANGE [p. 13]
O OPEN/CLOSE [p. 13]
P ( )/ ( ) [p. 15]
Q / [p. 13]
R [p. 13]
S RANDOM [p. 18]
T TIME [p. 18]
U REPEAT [p. 17]
V Tray
Plateau
[p. 24]
W MODE [p. 24]
X OPEN/CLOSE [p. 24]
Y DIRECTION [p. 24]
Z / [p. 25]
[ [p. 24]
\ [p. 24]
] REC/PAUSE [p. 26]
` DOLBY NR [p. 23, 26]
CD player Lecteur de disque compact
Tape deck Platine cassette
Remote control Telecommande
POWER
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
0
PRESET
TUNER
+
I0
PRESET
TIME
A
PROG
B
R.TIME
C
EDIT
D
DISC SKIP
MODE
E
CD
/
DIRECTION
LEVEL
REC
/
PAUSE
TEST
PROGRAM
CENTER
/
REAR
/
DELAY
MUSIC
SLEEP
INPUT
TAPE
VOLUME
1
2
3
4
5
6
7
8
9
9
0
A
B
C
D
POWER
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
0
PRESET
TUNER
+
I0
PRESET
TIME
A
PROG
B
R.TIME
C
EDIT
D
DISC SKIP
MODE
E
CD
/
DIRECTION
LEVEL
REC
/
PAUSE
TEST
PROGRAM
CENTER
/
REAR
/
DELAY
MUSIC
SLEEP
INPUT
TAPE
VOLUME
Q
S
O
G
F
M
L
K
H
J
J
P
P
I
N
E
R
1 Transmission window
Fenêtre de transmission
[p. 5]
2 Numeric buttons
Touches numériques
[p. 22]
3 A, B, C, D, E [p. 22]
4 TEST [p. 11]
5 CENTER/REAR/DELAY [p. 36]
6 LEVEL (–/+) [p. 36]
E Numeric buttons
Touches numériques
[p. 14]
F TIME [p. 16]
G PROG [p. 16]
7 POWER [p. 13]
8 SLEEP [p. 38]
9 PRESET ( / ) [p. 20, 22]
0 TUNER [p. 20]
A PROGRAM [p. 35]
B MUSIC [p. 33]
C VOLUME [p. 32]
D INPUT [p. 13, 20, 24, 26]
TUNER TAPE CD
↑↓
AUX/MD VCR VIDEO
H MODE [p. 14]
I DISC SKIP [p. 14]
J ( )/ ( )
[p. 15]
K [p. 13]
L / [p. 13]
M EDIT [p. 28, 29, 30]
N R. TIME [p. 28, 29, 30]
Amplifier/tuner Amplificateur/tuner
CD player
Lecteur de disque compact
Tape deck Platine cassette
O REC/PAUSE [p. 26]
P / [p. 25]
Q [p. 24]
R [p. 24]
S DIRECTION [p. 24]
For basic source play, the following illustrations on top of the
pages will help you look for the section you need.
...... CD play .......Tuning
...... Tape playback/recording
Contents
Precautions....................................... 1
Features ............................................ 4
Preparations and connections........ 5
Installing batteries in the remote control............. 5
Remote control operation range ......................... 5
Setting up the speakers...................................... 6
Connections........................................................ 8
Setting the clock ............................................... 10
Adjusting brightness of the display ................... 10
Speaker balance adjustment ............................ 11
CD player operation ....................... 12
Basic play ......................................................... 13
To change the disc play mode .......................... 14
To select another disc....................................... 14
To directly select the desired track.................... 14
To play the desired track (Skip) ........................ 15
To advance or reverse play rapidly (Search) .... 15
To exchange a disc (or discs) while playing
(PLAYXCHANGE) ........................................ 15
Program play .................................................... 16
Repeat play ...................................................... 17
Random play .................................................... 18
Switching the time display ................................ 18
Tuning operation ............................ 19
Automatic tuning............................................... 20
Manual tuning ................................................... 20
Automatic preset tuning.................................... 21
Manual preset tuning ........................................ 22
Playing back a tape........................ 23
General information .......................................... 23
Basic operation................................................. 24
Winding the tape............................................... 25
Searching for the beginning of
the desired selection .................................... 25
Recording ....................................... 26
Basic recording................................................. 26
Recording from CDs
utilizing the EDIT function ............................ 28
Operating an external unit
connected to this system ........... 31
Various sound control ................... 32
General sound control ...................................... 32
Graphic equalizer ............................................. 33
Sound field processor....................................... 34
Using the built-in timer .................. 37
Timer play ......................................................... 37
Timer recording................................................. 38
Sleep timer operation ....................................... 38
Appendix......................................... 39
Troubleshooting................................................ 39
Specifications ................................................... 41
English
Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment.
For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.
E-1
English
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Choose the installation location of this system carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also
avoid locations subject to vibration and excessive dust, heat,
cold or moisture. Keep it away from sources of hum such as
transformers and electric motors.
Do not operate this system upside-down. It may overheat,
possibly causing damage.
Never open the cabinet. If something drops into the set, contact
your dealer.
The openings on the main unit cover assure proper ventilation
of the main unit. If these openings are obstructed, the
temperature inside the main unit will rise rapidly. Avoid
placing objects against these openings, and install the main
unit in a well-ventilated area to prevent fire or damage.
Always set the VOLUME control to minimum before starting
an audio source play. Increase the volume gradually to an
appropriate level after play has started.
When not planning to use this system for a long period of time
(ie., vacation, etc.), disconnect the AC power plug from the
wall outlet.
Grounding or polarization – Precautions should be taken so
that the grounding or polarization of this system is not
defeated.
Do not use force on switches, controls or connection wires.
When moving the main unit, first disconnect the power plug
and the wires connected to other equipments. Never pull the
wire itself.
If an external appliance (TV, radio, etc.) interferes with the
operation of this system, move the main unit away from such
appliance.
Do not attempt to clean this system with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
Be sure to read the “Troubleshooting” section regarding
common operating errors before concluding that this system is
faulty.
To prevent lightning damage, disconnect the AC power plug
and the antenna cable when there is an electric storm.
Do not plug the AC power plug to the wall socket before you
finish all connections.
Never allow metallic items (e.g. screwdrivers, tools, etc.) to
come near the tape deck’s record/playback head assembly.
Doing so may not only scratch or damage the head’s mirror-
smooth finish, it may change the magnetic characteristics of
the heads, causing a deterioration in reproduction performance
quality.
Although the tape deck’s record/playback heads are of high
quality with outstanding reproduction characteristics, they can
get dirty through the use of old tapes or from dust
accumulation over time. This can have a serious effect on
reproduction quality. Clean the heads regularly with
commonly available head cleaners or with cleaning solutions.
The voltage to be used must be the same as that specified on
this system. Using this system with a higher voltage than
specified is dangerous and may result in a fire or other types of
accidents causing damage. YAMAHA will not be held
responsible for any damage resulting from use of this system
with a voltage other than specified.
The sound level at a given volume setting depends on speaker
location and other factors. Care should be taken to avoid
exposure to sudden high levels of sound, which may occur
when turning this system on with the volume control setting at
high. Also avoid exposure to continuous high levels of sound.
Sudden temperature changes and storage or operation in an
extremely humid environment may cause condensation inside
the cabinet. Condensation can cause this system to
malfunction.
To eliminate condensation:
Pickup
Leave the power on with no disc loaded until normal play
becomes possible (about 1 hour).
Tape head
Leave the power on with no tape loaded until normal
playback becomes possible (about 1 hour).
Note:
If condensation forms on the tape head, dirt or dust may
accumulate during use.
Remote control
Wipe off condensation on the transmission window with a
soft cloth before operating this system.
The carousel will turn when you open the disc tray by pressing
OPEN/CLOSE; therefore, make sure the carousel stopped
moving completely before you perform further operations such
as placing or removing a disc from the disc tray. Otherwise,
you may cause damage to your discs, or you might injure
yourself.
Precautions: Read this before operating your system
E-2
As the laser beam used in this unit is harmful to the eyes, do not
attempt to disassemble the cabinet. Refer servicing to qualified
personnel only.
This system is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this system
itself is turned off. This state is called the standby mode.
In this state, this system is designed to consume a certain
amount of power.
Note
Please check the copyright laws in your country to record
from records, compact discs, radio, etc. Recording of
copyright materials may infringe copyright laws.
CAUTION FOR CARRYING THE MAIN UNIT
Be sure not to carry or tip the main unit with discs
in it.
WARNING
To reduce the risk of fire or electric shock, do not expose this
system to rain or moisture.
To avoid electric shock, do not open the cabinet. Refer
servicing to qualified personnel only.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
Precautions: Read this before operating your system
CAUTION FOR MOVING THE MAIN UNIT
Before moving the main unit, first remove all discs from the
disc tray and close the tray by pressing the
OPEN/
CLOSE button. After you confirm that “NO DISC” lights up
on the display, turn this system into the standby mode by
pressing the STANDBY/ON switch, and then disconnect the
power plug from the AC outlet.
For Canadian Customers
To prevent electric shock, match wide blade of plug to wide
slot and fully insert.
This Class B digital apparatus complies with Canadian ICES–
003.
E-3
English
Precautions: Read this before operating your system
To prevent a malfunction of this
system:
Do not use any nonstandard shaped disc
(heart etc.) available on the market
because it might damage the system.
Do not use a disc with tape, seals, or
paste on it. If you use such a disc, a disc may get stuck
in the system, or damage to the system may result.
Notes about handling discs
Always handle the disc with care so that its surface is not
scratched.
Discs are not subjected to wear during play, but damage to the
disc surface when the disc is being handled can adversely
affect the disc’s play.
Be sure to use a felt-tip pen or similar writing tool when
writing on the label side of the disc. Do not use a ball-point
pen, pencil, or other hard-tipped writing tool, as these may
damage the disc and may adversely affect the disc’s play.
Do not warp discs.
When a disc is not currently being used, remove it from the
system and store in an appropriate case.
When removing or storing a disc, be careful not to scratch the
playing surface.
Discs are not affected by small particles of dust or fingerprints
on their playing surface, but even so they should be kept clean.
Wipe by using a clean, dry cloth. Do not wipe with a circular
motion; wipe straight outward from the center.
Do not try to clean the disc’s surface by using any type of disc
cleaner, record spray, anti-static spray or liquid, or any other
chemical-based liquid because such substances might
irreparably damage the disc’s surface.
Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time because these might
warp or otherwise damage the disc.
No!
To play an 8-cm CD
Place it in the inner recessed area of the disc tray. Do not put a
normal (12-cm) CD on top of an 8-cm CD.
NOTES ABOUT DISCS
E-4
Features
General
5-Speaker Multi-Channel Audio System (Two
Front, One Center and Two Paralleled Rear
Speakers)
High Power Output
Front L, R: 80W + 80W (6) RMS, 0.9% THD, 1
kHz
Center: 80W (6) RMS Output Power, 0.9%
THD, 1 kHz
Rear: 25W (6) RMS Output Power, 0.9%
THD, 1 kHz
4 External Audio/Video Component Connecting
Capability
Multi-Use Timer/Sleep Timer
SUBWOOFER Output for Low Frequency
Expansion
Remote Control Capability
BASS BOOST
5-Band Spectrum Analyzer
DOLBY PRO LOGIC and DOLBY 3 STEREO
Decoding
Sound Field Processing (HALL and YMERSION)
Test Tone Generator for Easier Speaker Balance
Adjustment
3 Preset Graphic Equalizer Modes (ROCK, POPS
and JAZZ)
Balance control for the left and right main
speakers in DOLBY PRO LOGIC mode
CD Player
3-Disc Carousel Type CD Changer
PLAY
X
CHANGE
Disc changing while playing
20-Track Random Access Programming
Repeat Play for Single Track/Entire Disc/All
Discs
Random Sequence Play
Tape Deck
Automatic Synchronized Recording with CD
EDIT Function Useful for Recording CD(s)
Automatic Reverse
Dolby B Type Noise Reduction System
Tuner
40 Station Preset Tuning
Automatic Preset Tuning
E-5
English
Preparations and connections
1Turn the remote control over and remove the battery
compartment cover by sliding it in the direction of the
mark.
2Insert the batteries (AA, R6, UM-3 type) according to the
polarity markings on the inside of the battery compartment.
3Attach the battery compartment cover.
Notes
Be sure the polarities are correct. (see the illustration inside the battery
compartment.)
Remove the batteries if the remote control is not used for an extended
period of time.
If batteries leak, dispose of them immediately. Avoid touching the leaked
material or letting it come in contact with clothing, etc. Clean the battery
compartment thoroughly before installing new batteries.
Be sure to use the same type of batteries.
Do not use a new battery and an old battery together.
Notes
The area between the remote control and the main unit must be clear of
large obstacles.
Do not expose the remote control sensor to strong lighting, in particular,
an inverter type fluorescent lamp. Otherwise, the remote control may not
work properly. If necessary, position the main unit away from direct
lighting.
Battery replacement
If you find that the remote control must be used closer to the main
unit, the batteries are weak. Replace both batteries with new ones.
2
1
3
DISC
3
OPEN
/
CLOSE
DISC CHANGE
DISC
2
DISC
1
3–DISC CD CHANGER
STANDBY
/
ON
STANDBY
TIMER
PROGRAM B.BOOST MUSIC
INPUT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
VOLUME
UP
DOWN
DIRECTION
AUTO REVERSE CASSETTE DECK
MINI COMPONENT SYSTEM GX
707
DOLBY B NR
OPEN
/
CLOSE
DOLBY SURROUND
PRO•LOGIC
DIGITAL AUDIO
30°
30°
0.2 m – 6 m
(8” – 20’)
Installing batteries in the remote control
Remote control operation range
E-6
Preparations and connections
4 channel 5 speaker configuration
This system employs a 5 speaker configuration: 2 front speakers, 2
rear paralleled speakers and a center speaker.
The front speakers are used for outputting main source sound. The
rear speakers are for effect and surround sounds when the sound
field program
PRO LOGIC or HALL is selected. The center
speaker is for center sounds (dialogue etc.) when the sound field
program PRO LOGIC or 3 STEREO is selected.
Placing the speakers
Front speakers: On both sides of and at approximately the
same height as the TV.
Center speaker: Precisely between the front speakers.
Rear speakers: Behind your listening position, facing
slightly inward. About 1.8 m (approx. six
feet) from the floor.
Subwoofer: The position of the subwoofer is not so
critical because low bass tones are not highly
directional. However, we recommend that
you place the subwoofer anywhere in front of
your listening position.
Mounting the center speaker
Place the speaker on top of the TV or on the floor under the TV or
inside the TV rack so that it is stable.
When placing the speaker on top of the TV, put the provided velcro
strips at two corners on both the bottom of the speaker and top of
the TV to prevent the speaker from falling.
Setting up the speakers
1
2
Front L
Center
Front R
Rear L Rear R
Dialogue
Front L
Center
Front R
(Subwoofer)
(TV set)
Rear L
Rear R
Velcro strip
TV set
(not included in
this system)
E-7
English
Preparations and connections
Mounting the rear speakers
Mount the rear speakers on a shelf, rack or on the floor, or hang
them on the wall.
To mount the rear speakers by using commercially
available speaker stands
The provided mounting bracket has 1 pair of screw holes (at an
interval of 60 mm). They are for mounting the speaker on a speaker
stand.
* These screw holes can be used with M4 screws only.
Note
It is recommended that you connect the speaker cords to the
speaker’s terminals before attaching the bracket to the speaker.
1 Attach the bracket to the bottom of the speaker by using the
provided screw so that the convex part of the bracket fits in the
grooved part of the speaker as shown left.
2 Mount the speaker on the speaker stand by using the screw holes
on the bracket.
To mount the rear speakers directly on the wall
If desired, you can hang the speaker on the protruding screws on
the wall without using the bracket.
Fasten screws into a firm wall or wall support as shown left, and
hang the holes of the speaker on the protruding screws.
* Make sure that the screws are securely caught by a narrow part
of the holes.
WARNING
Each of the rear speakers weighs 0.8 kg (1 lbs. 12 oz.). Do not
mount them on thin plywood or soft wall surface material, as the
screws may come out of the flimsy surface, causing the speakers
to fall and be damaged, or result in personal injury.
Do not fasten the speakers to the wall with nails, adhesives, or
other unstable hardware. Long-term use and vibrations may
cause them to fall.
To avoid accidents resulting from tripping over loose speaker
cords, fix them to the wall.
Select a proper position on the wall to mount the speaker and the
stand so that no one will injure his/her head or face with the edge
of the stand.
60 mm
Tapping screw (Available
at the hardware store)
Min.
12 mm
65 mm
Wall or wall support
Mounting bracket
Screw
E-8
MAINS
SUBWOOFER
OUT
VIDEO SIGNAL
OUT
IN
VCR
VIDEO
R L
OUT
IN
AUX/MD
SPEAKERS
SEE OWNER'S MANUAL
FOR CONNECTION.
REAR CENTER REAR
R L
CENTER: 6 MIN./SPEAKER
REAR: 12 MIN./SPEAKER
FRONT
R L
6 MIN./SPEAKER
SPEAKERS
MONITOR
OUT
R
L
L R
Preparations and connections
Connections
Never plug the AC supply lead of this system into the AC outlet until all connections are
completed.
On the main unit
Red: positive (+)
Black: negative (–)
Caution
Do not let the bare speaker wires touch each other as this could damage the amplifier and/or speakers.
When connecting a subwoofer (not included in this system)
You may wish to add a subwoofer to reinforce the bass frequencies.
When connecting a subwoofer to this system, connect the SUBWOOFER OUT terminal of this system to the INPUT
terminal of the subwoofer.
* Ordinary subwoofers, including the Yamaha Active Servo Processing Subwoofer System, are designed so that both the
amplifier and subwoofer are contained in the same unit.
* The SUBWOOFER OUT terminal outputs low frequencies from the left front, center and right front channels.
(The cut-off frequency of this terminal is 200 Hz.)
Connecting speakers
Connect the speakers to the corresponding speaker terminals on the rear of the main unit by using the speaker cords. Make
sure that the polarity of the speaker cords is correct, that is the + and – markings are observed. If these cords are reversed,
the sound will be unnatural and lack bass.
Subwoofer system
(not included in this system)
Rear speaker
Center speaker
Rear speaker
INPUT
Front speakers
To AC outlet
On the speakers
Red: positive (+)
Black: negative (–)
1
2
3
1
2
3
1Press the tab.
2Insert the bare wire.
[Remove approx. 5mm (1/
4”) insulation from the
speaker wires.]
3Release the tab and secure
the wire.
1Pull up the tab.
2Insert the bare wire.
[Remove approx. 5mm (1/
4”) insulation from the
speaker wires.]
3Press down the tab and
secure the wire.
E-9
English
DIGITAL OUT
OPTICAL
SUBWOOFER
OUT
OUT
IN
VCR
VIDEO
R L
OUT
IN
AUX/MD
SEE
FOR
REAR
R
CENTE
R
REAR:
R
VIDEO SIGNAL
MONITOR
OUT
FREQUENCY STEP
50
K
H
Z
9
K
H
Z
100
K
H
Z
10
K
H
Z
FM AM
DIGITAL OUT
OPTICAL
ANTENNA
FM GND AM
75 UNBAL.
ANTENNA
FM GND AM
75 UNBAL.
ANTENNA
FM GND AM
75 UNBAL.
FREQUENCY STEP
50KH Z 9 KHZ
100 KHZ 10 KHZ
FM AM
(1)
(2)
Preparations and connections
Antenna connection
(1) Supplied FM antenna
Connect the FM antenna wire to the corresponding terminal and
direct it to the direction where the strongest signal can be received.
(2) Supplied AM loop antenna
Connect the AM loop antenna wires to the corresponding
terminals. Position the AM loop antenna for optimum reception.
Notes
When static is still heard even after adjusting the position of the AM loop
antenna, try reversing the wire connections (from the right terminal to
the left one, and vice versa).
The AM loop antenna should be placed apart from the main unit. The
antenna may be hung on a wall.
Using an external antenna
If you need better reception, use an external FM antenna instead
of an indoor FM antenna. Consult your dealer.
Use an external AM antenna if you need better reception.
Consult your dealer.
Connecting external components
This system can be connected with external audio and video
components. Make connections between this system and the
components using RCA pin plug connector cables, by correctly
connecting L (left) to L and R (right) to R. Also, refer to the
owner’s manual for the component to be connected to this system.
* A digital-to-digital recording is possible from a CD played on
the built-in CD player to an MD (or tape) on an external MD
recorder (or DAT) by connecting the DIGITAL OUT
(OPTICAL) terminal on the rear of the main unit to the MD
recorder (or DAT).
TV monitor
VCR
LD/DVD player, etc.
MD recorder, etc.
E-10
Setting the clock
1 While the power is on, press DISPLAY to display time.
2 While holding down TIME ADJ, press HOUR and set the hour.
* Press HOUR once to advance the time by 1 hour. Press and
hold to advance continuously.
3 While holding down TIME ADJ, press MIN and set the minute.
* Press MIN once to advance the time by 1 minute. Press and
hold to advance continuously.
* The hour setting will not advance even if minute is advanced
from “59” to “00”.
Australia model uses a 24-hour display. U.S.A. and Canada
models use a 12-hour display. For General model, either the 24-
hour display or the 12-hour display [shown by “AM (PM)
12:00”] is selected depending on the setting of the
FREQUENCY STEP switch on the rear panel.
* Set this system into the standby mode and disconnect the AC supply
lead when switching the FREQUENCY STEP.
Note
In the event of a power failure or when the AC supply lead is disconnected,
the time display will go out; however, the clock will function for about 5
minutes without any power supply. Otherwise, the time display will flash
on and off to indicate that time must be reset.
Adjusting brightness of the display
If desired, you can adjust the brightness of the display.
Press and hold DISPLAY for more than 2 seconds so that
“DIMMER ±0” appears on the display.
While holding down DISPLAY, turn VOLUME clockwise to
increase or counterclockwise to decrease brightness.
Control range: ±0 to –6 (Preset value: ±0)
Preparations and connections
DISC3
OPEN
/
CLOSE
DISC CHANGE
DISC2DISC1
3–DISC CD CHANGER
STANDBY
/
ON
STANDBY
TIMER
PROGRAM
B.BOOST MUSIC
INPUT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
VOLUME
UP
DOWN
DIRECTION
AUTO REVERSE CASSETTE DECK
DOLBY B NR
OPEN
/
CLOSE
PHONES
BASS TREBLE
MODE DOLBY NR
REC
/
PAUSE
AUTO
/
MANUAL
TIMER
MEMORY
TIME ADJ
RANDOM
HOUR
REPEAT
TIME DISPLAY
MIN
DIGITAL AUDIO
1
2
3
DISPLAY
MEMORY
RANDOM
TIME ADJ
REPEAT
HOUR
MIN
MEMORY
RANDOM
TIME ADJ
REPEAT
HOUR
MIN
Changes.
Changes.
OPEN
/
CLOSE
DISC CHANGE
PROGRAM B.BOOST MUSIC
VOLUME
UP
DOWN
Y
RANDOM
HOUR
REPEAT
TIME DISPLAY
MIN
DIGITAL AUDIO
VOLUME
DISPLAY
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Yamaha GX707 Manuale utente

Categoria
Lettore CD
Tipo
Manuale utente
Questo manuale è adatto anche per