Roland Drums HD-3 Manuale utente

Deutsch Français Italiano Español Português NederlandsEnglish

IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE:

BROWN:

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.

NEUTRAL

LIVE

For the U.K.

Deutsch Français Italiano Español Português NederlandsEnglish

Main Features

A rich and wide variety of sounds

The HD-3 features 20 dierent drum kits, designed to be used

with all styles of music.

Reference

“Drum Kit Sound List” (p. 17)

Enjoy playing on your own

When using headphones, only you will hear what you are

playing.

Unlike acoustic drums, no loud sounds are produced, so you

can play without worrying about other people.

The MIX IN jack allows one to connect external audio sources,

ideal for playing along with audio players, etc.

A compact drum set

The HD-3 is compact, simple and easy to set up just about

anywhere.

Play whenever you want

Just turn on the HD-3, select a drum kit, and it’s ready to play.

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES”

(the rear side of the Setup Guide). These sections provide important information concerning the proper

operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature

provided by your new unit, Owner’s manual and Setup Guide should be read in its entirety. The manual

should be saved and kept on hand as a convenient reference.

ROLAND CORPORATION.

Roland, V-Drums, and V-Drums Lite are registered trademarks of Roland Corporation in the United States and/or other

countries.

3

Deutsch Français Italiano Español Português NederlandsEnglish

Contents

Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Panel Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Introducing the Drum Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Drum Set Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

The Basics of Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

How to Read Drum Notation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Playing the Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Switching the Power On and O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Selecting a Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Listening to Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Playing Along With the Metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Various Settings (the Edit screens) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Basic Operation in the Edit Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Parameter List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Changes the sound of the metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjust the metronome volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjust the contrast of the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Automatically turn the HD-3 o (auto o) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Exchange the pad settings for left-handed players . . . . . . . . . . . . . . . . . . . 15

Adjust the pad sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Change the note number of the pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Set the note number for cross sticking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Resets the factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Drum Kit Sound List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

About MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Setting-up the HD-3 for Left-handed Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

4

Front Panel

Panel Descriptions

[ ] (Metronome) button

This starts or stops the metronome (p. 12).

[ ] [ ] button

These adjust the tempo of the metronome or of

the pattern playback. When editing the settings,

use these buttons will be used to change the

values of the selected parameters (p. 14).

Kit button ([1]–[10])

For selecting drum kits (p. 11).

Holding down a KIT button for several seconds

will let you hear a demo pattern that uses the

corresponding drum kit (p. 12).

These buttons are also used to select items

during editing (p. 14).

[VARIATION] button

Pressing this button selects a variation

for each drum kit.

Also by holding down the [VARIATION]

button and pressing a kit button, you

can access various edit screens. “Various

Settings (the Edit screens)” (p. 14).

[VOLUME] knob

Adjusts the sound level.

Turning the knob to the right to

increases the volume, and to the left,

decreases it.

[POWER] switch

Hold down this switch for several seconds to

turn the HD-3 on/o.

* With the factory settings, the HD-3’s

power will automatically be switched o 30

minutes after you stop playing or operating

the unit.

To turn the HD-3 back on, press the [POWER]

switch again.

If you don’t want the power to turn o

automatically, change the “AUTO OFF” setting

to “OFF” as described on p. 15.

Display

This shows the drum kit, the metronome tempo, and the

value of settings when you’re editing them.

Drum Kit Name

Tempo

Panel Descriptions

5

Deutsch Français Italiano Español Português NederlandsEnglish

Side Panel

Playing along with music (MIX IN jack)

If you connect an audio player to the MIX IN jack, you can play along

with your favorite songs as the sound will be mixed with the drum

sounds and output together. Enjoy playing along with your favorite

music!

* Use your audio player’s volume control to adjust the sound level.

* To prevent malfunction and damage to your speakers, always be sure to turn the

volume all the way down on all your equipment, then switch the power o on

everything before you make any connections.

Right

Left

MIX IN jack

For connecting an external audio source. Sound

input here will also be heard through the main

and headphone outputs.

OUTPUT jack

For connecting an optional amplier (PM-03)

or other external device.

Headphones can also be connected here

(see the separate “Setup Guide”).

Headphone jack

For connecting headphones (when headphones

are connected, the OUTPUT jack will still be

active) (see the separate “Setup Guide”).

DC IN jack

For connecting the power supply

(see the separate “Setup Guide”).

MIDI OUT jack

For connecting an external MIDI device (p. 18).

6

Introducing the Drum Set

Playing drums is not only fun, but just about anyone can easily start playing — they make sound

when you simply hit them! Drums create the rhythmic foundation of music and are vital in

maintaining the tempo and groove of the entire band.

Drum Set Elements

Here are some basic terms related to drum sets.

* The indications in parentheses ( ) show the names used on the HD-3.

Bass Drum (Kick)

Played with a kick pedal, it’s the largest drum in the kit.

Snare Drum

The snare drum is the main “voice” of a drum kit.

Hi-Hat/Hi-Hat Pedal

An acoustic hi-hat uses 2 cymbals mounted on a hi-hat stand.

Pressing the hi-hat pedal opens and closes it.

* The HD-3 uses a single pad.

Tom (Tom 1, Tom 2)

These are usually mounted above the bass drum.

Floor Tom (Tom 3)

Sometimes called a bass tom, it either stands on it’s own legs or is mounted on a stand.

Ride Cymbal

Usually mounted on the right side of the kit, the ride cymbal is principle elements in keeping time.

Crash Cymbal

Smaller than the ride, the crash cymbal is mainly used for accents.

Introducing the Drum Set

7

Deutsch Français Italiano Español Português NederlandsEnglish

Acoustic Drum

Crash

Hi-Hat

Ride

Snare

Tom

Floor Tom

Hi-Hat Pedal

Kick (Bass Drum)

Kick Pedal

HD-3

Tom 1 (T1) Tom 2 (T2)

Tom 3 (T3)

Crash (CR)

Hi-Hat (HH)

Hi-Hat Pedal (HHC)

Kick Pedal (KIK)

Snare (SNR)

Ride (RD)

* Letters and numbers in parentheses ( ) relate to the cable labeling.

HHC

Introducing the Drum Set

8

The Basics of Playing

Drums are played using both hands and

both feet. Here we’ll explain how to hold

the sticks and use the pedals.

Holding the Sticks

The most common way to hold the sticks is

called the “matched grip” as shown in the

illustrations below.

Left hand

Right hand

Using the Kick Pedal

The kick pedal can be pressed in either of

two ways: “heel up” or “heel down.”

Heel down

In this method, the entire bottom of your

foot from heel to toe stays in contact with

the pedal. Use your ankle joint to make your

toes push down the pedal. This method

allows more precise control of the volume,

and is often used in jazz and bossa nova.

Heel up

In this method, your heel oats above the

pedal. With your heel o the pedal, lower

your entire foot to push down the pedal.

This method applies the full weight of your

foot to the pedal, making it easier for you

to produce a stronger sounds than the heel

down method. This is often used in rock

and pop.

Introducing the Drum Set

9

Deutsch Français Italiano Español Português NederlandsEnglish

Using the hi-hat

In an acoustic drum set, the hi-hat consists

of two cymbals placed facing each other

vertically on a hi-hat stand. The two

cymbals can be closed together by pressing

the pedal.

A variety of playing techniques are possible,

such as playing the cymbals with the pedal

and/or playing them with sticks.

When you press the pedal, the two cymbals

will come together (closed). When you

release the pedal, the two cymbals will

separate (opened).

The HD-3 lets you use ve dierent hi-hat

performance techniques.

Closed

With the hi-hat pedal pressed rmly, strike

the pad with a stick. A short “chick” sound

will be heard.

Half-open

With the hi-hat pedal pressed gently, strike

the pad with a stick. A slightly longer “swish”

sound will be heard.

Open

With the hi-hat pedal completely released,

strike the pad with a stick. An even longer

“sound” than the half-open sound will be

heard.

Foot closed

Just press the pedal without using a stick.

This sound will be softer and shorter than

the closed sound played with a stick. Useful

for keeping time with this tight sound.

Foot splash

Press and immediately release the pedal

without using a stick.

This is equivalent to momentarily clashing

the two cymbals of an acoustic hi-hat. It

produces a “splash” sound that is softer than

the open strike.

Introducing the Drum Set

10

How to Read Drum Notation

Here’s an example of typical notation used for a drum set. This example is a basic 8-beat pattern

often used in rock and pop.

Crash/Ride

Hi-Hat

Kick Pedal

Snare

R: Right Hand

L: Left Hand

* The crash and ride are written in the same position of the notation. Notes with the accent mark

“ ” are played on the crash, and notes without the accent mark are played on the ride.

* The hi-hat part can also be substituted with the ride cymbal part.

11

Deutsch Français Italiano Español Português NederlandsEnglish

Playing the Kit

Switching the Power On and O

For details on connecting the HD-3 sound

module, refer to the separate “Setup Guide.”

* Once the connections have been

completed, turn on power to your

various devices in the order specied.

By turning on devices in the wrong order,

you risk causing malfunction and/or

damage to speakers and other devices.

1. Make sure that the HD-3’s [VOLUME]

knob, and that of any connected drum

monitor, is set to the minimum level.

2. Hold down the [POWER] switch of

the HD-3 sound module to turn on

the unit. To turn o the unit, hold

down the [POWER] switch for several

seconds.

* Before switching the power on/o,

always be sure to turn the volume

down. Even with the volume turned

down, you might hear some sound

when switching the power on/o.

However, this is normal and does not

indicate a malfunction.

3. Turn on the power of the connected

drum monitor.

4. Raise the volume of both to get the

sound level required.

* This unit is equipped with a protection

circuit. A brief interval (a few seconds)

after power up is required before the

unit will operate normally.

* Turn the power o by reversing the

order in which you turned the power on.

Selecting a Kit

A drum kit consists of sounds assigned to

each pad. In some cases, the sound will

change depending upon your playing

dynamics.

1. Press one of the kit buttons ([1]–[10]).

Pressing these buttons will call up dierent

kits.

2. Press the [VARIATION] button.

Variation kits are provided for each kit.

Pressing the [VARIATION] button will switch

to the variation kit of the selected drum kit.

The [VARIATION] button will light if a

variation kit is selected.

Playing the Kit

12

Listening to Patterns

Here’s how to listen to a performance

example (pattern) using the drum kit.

* Before playing back a pattern, lower

the volume of the HD-3. The volume

of these patterns may be louder than

when you play the kit normally, and you

do not want to risk damage to your ears

or connected equipment.

1. Press and hold one of the Kit Buttons

([1]–[10]) for a few seconds.

A pattern using this current kit will play.

If you press the [VARIATION] button, the

pattern for that variation kit will play.

MEMO

• Each pattern will play at it’s default

tempo (set at the factory). If you want

to change the tempo, play back the

pattern and use the [

][ ] buttons to

adjust the tempo.

• You can NOT play the pads when a

pattern is playing.

• No data for the music that is played will

be output from MIDI OUT jack.

2. To stop pattern playback, press any

kit button ([1]–[10]).

Playing Along With the

Metronome

Here’s how you can play the kit while

listening to the metronome.

This is the best way to practice and learn to

play at a steady tempo.

1. Press [ ] button.

[ ] button lights up and the

metronome starts.

Playing the Kit

13

Deutsch Français Italiano Español Português NederlandsEnglish

2. Use the [ ][ ] buttons to adjust the

metronome speed.

The display will indicate the tempo.

Range: 40–250

MEMO

You can change the sound and volume

of the metronome. For details, refer to

“Changes the sound of the metronome”

(p. 15).

TIPS

You can rapidly adjust the metronome

volume by holding down the [

] button

and using the [ ][ ] buttons.

14

Various Settings (the Edit screens)

The Edit screens allow you to make various

settings for the HD-3.

Basic Operation in the

Edit Screens

In the edit screens, you’ll use the following

procedure to make settings.

1. While continuing to hold down the

[VARIATION] button, press one of the

kit buttons ([1]–[10]) to select the

parameter that you want to edit.

Hold down

Current value of the selected parameter will

appear.

If you’ve selected pad sensitivity (Pad Sens)

or the note number (MIDI Note) transmitted

by that pad, hitting any pad or pressing the

pedals will allow you to edit the parameters

of that pad.

Reference

For details on each item, refer to

“Parameter List” (p. 15).

* If you hold down the [VARIATION]

button for a while, you’ll be presented

with a message asking you to select a

parameter by pressing one of the kit

buttons ([1]–[10]).

2. Use the [ ][ ] buttons to edit the

value.

If you press [ ] and [ ] simultaneously, the

parameter will revert to its default value.

3. Press the [VARIATION] button or one

of the kit buttons ([1]–[10]) to exit the

edit screen.

Various Settings (the Edit screens)

15

Deutsch Français Italiano Español Português NederlandsEnglish

Parameter List

Parameter Value Explanation

1

Metronome

Sound

Changes the sound of the metronome

You have three dierent sound choices for the metronome: click,

cowbell, and maracas.

CLICK (default) Click

COWBELL Cowbell

MARACAS Maracas

2

Metronome

Volume

1–10

(default: 5)

Adjust the metronome volume

This adjusts the volume of the metronome.

You can also adjust the volume of the metronome from an

ordinary screen by holding down the [

] button and pressing

the [ ] or [ ] button.

3 LCD Contrast

1–10

(default: 5)

Adjust the contrast of the display

This adjusts the contrast of the characters in the display.

4 Auto O

Automatically turn the HD-3 o (auto

o)

With the factory settings, the HD-3 will automatically be

switched o 30 minutes after you stop playing or operating the

unit.

OFF The HD-3 will remain on.

10 min, 30 min, 240

min

(default: 30 min)

The HD-3 will automatically turn o when no operation has been

performed for the specied time.

5 L-R Exchange

OFF, ON

(default: OFF)

Exchange the pad settings for left-

handed players

This changes the HD-3’s settings for left-handed use.

If this is “ON,” the following pads will be exchanged between left

and right.

• Crash and ride

• Tom 1 and tom 2

• Hi-hat control pedal and kick pedal

* You’ll need to remove the Tom 3 pad and the hi-hat pad, and

exchange them. See “Setting-up the HD-3 for Left-handed Use”

(p. 21).

Various Settings (the Edit screens)

16

Parameter Value Explanation

6 Pad Sens

-5 – +5

(default: 0)

Adjust the pad sensitivity

This adjusts the sensitivity of each pad. For example if the pad

sensitivity value is raised, even children, whose playing strength

is less developed will be able to produce maximum volume.

In step 2 of “Basic Operation in the Edit Screens” (p. 14), strike the

pad whose setting you want to edit. After you’ve selected the

pad, use [

][ ] buttons to edit the value.

7 MIDI Note No.

Change the note number of the pad

You can change the MIDI note number of each of the HD-3’s

pads.

In step 2 of “Basic Operation in the Edit Screens” (p. 14), strike the

pad whose setting you want to edit. After you’ve selected the

pad, use [

][ ] buttons to edit the value.

OFF No note number is assigned.

0–127

The selected note number is assigned.

For the default settings of each pad, refer to “About MIDI” (p. 18).

8 MIDI X-Stick

Set the note number for cross sticking

Here you can select whether the note number that has been set

for SNARE Rim will be output, or note number 37 will be output

when the cross-stick sound is produced.

OFF (default)

Choose this setting when you only need rim shot performance

data, when using computer software, games, etc. (The note

number that has been set for SNARE Rim will always be output.)

ON

Choose this setting when sounding an external drum sound

module. (Note number 37 will be output when the cross-stick

sound is produced.)

10 Factory Reset

Resets the factory settings

Resets the HD-3 to the factory-set condition.

When “Factory Reset = OK!” appears in the display, press [

].

When “Sure?” appears, press [ ] again.

If you decide to cancel, press [

].

17

Deutsch Français Italiano Español Português NederlandsEnglish

Appendix

Drum Kit Sound List

No.

Kit Name Kick Snare Tom 1 Tom 2 Tom 3 Hi-Hat Crash Ride

1

Normal

Standard-V Solid Kick

Bright

Snare

Wood

Tom1

Wood

Tom3

Wood

Tom4

Medium

Hi-Hat

Thin Crash Bright Ride

Variation

Lite Pop Solid Kick

Bright

Snare

Wood

Tom1

Cowbell

Wood

Tom2

Tambou-

rine Hi-Hat

Splash/

Crash

Bright Ride/

Crash

2

Normal

Hard Rock Heavy Kick Metal Snare

Wood

Tom2

Wood

Tom3

Wood

Tom4

Heavy

Hi-Hat

Medium

Crash

Heavy

Ride/Crash

Variation

Stage Solid Kick Metal Snare

Wood

Tom2

Wood

Tom3

Wood

Tom4

Heavy

Hi-Hat

Power

Crash

Heavy

Ride/China

3

Normal

Vintage

Kick

Wood

Snare

Vintage

Tom1

Vintage

Tom2

Vintage

Tom3

Dark Hi-Hat Sizzle Ride Bright Ride

Variation

Brushes

Vintage

Kick

Brush S Brush Tom1 Brush Tom2 Brush Tom3

Brush

Hi-Hat

Brush Sizzle

Ride

Brush Ride

4

Normal

Double

Bass

Blast Kick

Heavy

Snare

Solid Tom1 Solid Tom2 Solid Tom3

Medium

Hi-Hat

Eect

Cymbal/

Crash

Heavy

Ride/China

Variation

Power Heavy Kick

Heavy

Snare

Wood

Tom4

Wood

Tom4

Wood

Tom4

Medium

Hi-Hat

Power

Crash

Heavy

Ride/Crash

5

Normal

Funky Jam

Slap Bass &

Kick

Vintage

Snare

Dry Tom1 Slap Bass Dry Tom3

Cutting

Gt.&Hi-Hat

Cutting Gt./

Crash

Distortion

Gt.

Variation

Bright Dry Kick

Vintage

Snare

Dry Tom1 Dry Tom2 Dry Tom3

Medium

Hi-Hat

Splash/

Crash

Bright Ride/

Crash

6

Normal

Compact

Kick

Wood

Snare

Fiber Tom1 Fiber Tom2 Fiber Tom3

Light

Hi-Hat

Paper Crash

Bright Ride/

Crash

Variation

Jungle

Compact

Kick

Wood

Snare

Frame Tom

Hard

Comp S

Fiber Tom3

Tambou-

rine Hi-Hat

Eect

Cymbal/

Splash

Bright

Ride/Eect

Cymbal

7

Normal

Latin

Groove

Heavy Kick

Wood

Snare

Bongo Conga Timbale

Medium

Hi-Hat

Splash

Bright Ride/

China

Variation

Latin Perc Surdo Pandeiro Bongo Conga Timbale

Jingle

Hi-Hat

Guiro Agogo

8

Normal

World Perc Cajon Cajon Tabla Baya Djembe

Tambou-

rine Hi-Hat

Crotale /

Rain Stick

Eect

Cymbal

Variation

Africa Heavy Kick

Wood

Snare

Pot Drum Djembe Bendir

Tambou-

rine Hi-Hat

African

Jingle

Eect

Cymbal

9

Normal

Dance Beat Dance Kick Clap Snare Dense Click Radio Tom Super Low

Dance

Hi-Hat

Scratch/

Sweep

Cymbal

Dance

Cymbal

Variation

Electronic TR-808 Kick

TR-808

Snare

CR-78

Bongo

TR-808

Tom1

TR-808

Tom2

Elec Hi-Hat

TR-808

Cowbell/

Crash

Elec

Cymbal

10

Normal

Beat Box Voice Kick Snap/Clap Voice-Dat Voice-Doot Heart Beat

Voice

Hi-Hat

Voice-

Ahaaa/

Cymbal

Voice-Tun/

Haaa

Variation

Toy Box

Elephant

Kick

Toy Snare Hoo… Droid Voice Jet Stream

Industrial

Hi-Hat

Twinkle

Bell/Hand

Cymbal

Toy Bell/

Nantoka!

Appendix

18

About MIDI

You can connect a MIDI sound module or sequencer to the HD-3’s MIDI OUT connector.

By connecting an external sound module to the HD-3’s MIDI OUT connector you can play sounds

on that external module.

If you connect the MIDI OUT to a sequencer, you can record your performance.

You can also use the HD-3 as a controller for games that support MIDI.

MIDI OUT jack

External MIDI

device

MIDI In jack

Item Settings

MIDI transmit channel 10

Hi-Hat Pedal

Position data is transmitted using control change number 4 (foot

controller).

Note number produced when you strike

a pad

(default)

Pad Note Number

Snare Head 38

Snare Rim 40

Tom 1 48

Tom 2 45

Tom 3 43

Crash Bow 49

Crash Edge 55

Ride Bow 51

Ride Edge 53

Hi-Hat Open Bow 46

Hi-Hat Open Edge 26

Hi-Hat Close Bow 42

Hi-Hat Close Edge 22

Hi-Hat Foot Close 44

Kick Pedal 36

La pagina si sta caricando...

Roland Drums HD-3 Manuale utente

Questo manuale è adatto anche per

Roland Drums HD-3 Manuale utente

in altre lingue

Documenti correlati

Altri documenti