Yamaha NU1 Manuale del proprietario

Marca: Yamaha

Modello: NU1

Categoria: Tastiere

Tipo: Manuale del proprietario

ENGLISHDEUTSCH

FRANÇAIS

ESPAÑOL

Owner’s Manual

Bedienungsanleitung

Mode d'emploi

Manual de instrucciones

NU1

Hybrid Piano

Before using this instrument, be sure to read

“PRECAUTIONS” on pages 6 – 7.

Achten Sie darauf, vor Einsatz dieses Instruments die

„VORSICHTSMASSNAHMEN“ auf Seiten 6-7 durchzulesen.

Avant d'utiliser cet instrument, lisez attentivement la section

« PRÉCAUTIONS D'USAGE » aux pages 6-7.

Antes de utilizar el instrumento, lea la sección

“PRECAUCIONES”, en las páginas 6-7.

2 NU1 Owner’s Manual

PRODUCT SAFETY MARKINGS: Yamaha electronic

products may have either labels similar to the graphics

shown below or molded/stamped facsimiles of these

graphics on the enclosure. The explanation of these graph-

ics appears on this page. Please observe all cautions indi-

cated on this page and those indicated in the safety

instruction section.

See bottom of Keyboard enclosure for graphic symbol

markings.

The exclamation point within the equi-

lateral triangle is intended to alert the

user to the presence of important operat-

ing and maintenance (servicing) instruc-

tions in the literature accompanying the

product.

The lightning flash with arrowhead

symbol, within the equilateral triangle,

is intended to alert the user to the pres-

ence of uninsulated “dangerous volt-

age” within the product’s enclosure that

may be of sufficient magnitude to con-

stitute a risk of electrical shock.

IMPORTANT NOTICE: All Yamaha electronic products

are tested and approved by an independent safety testing

laboratory in order that you may be sure that when it is

properly installed and used in its normal and customary

manner, all foreseeable risks have been eliminated. DO

NOT modify this unit or commission others to do so unless

specifically authorized by Yamaha. Product performance

and/or safety standards may be diminished. Claims filed

under the expressed warranty may be denied if the unit is/

has been modified. Implied warranties may also be

affected.

SPECIFICATIONS SUBJECT TO CHANGE: The

information contained in this manual is believed to be cor-

rect at the time of printing. However, Yamaha reserves the

right to change or modify any of the specifications without

notice or obligation to update existing units.

ENVIRONMENTAL ISSUES: Yamaha strives to pro-

duce products that are both user safe and environmentally

friendly. We sincerely believe that our products and the

production methods used to produce them, meet these

goals. In keeping with both the letter and the spirit of the

law, we want you to be aware of the following:

Battery Notice: This product MAY contain a small non-

rechargeable battery which (if applicable) is soldered in

place. The average life span of this type of battery is

approximately five years. When replacement becomes nec-

essary, contact a qualified service representative to per-

form the replacement.

Warning: Do not attempt to recharge, disassemble, or

incinerate this type of battery. Keep all batteries away from

children. Dispose of used batteries promptly and as regu-

lated by applicable laws. Note: In some areas, the servicer

is required by law to return the defective parts. However,

you do have the option of having the servicer dispose of

these parts for you.

Disposal Notice: Should this product become damaged

beyond repair, or for some reason its useful life is consid-

ered to be at an end, please observe all local, state, and fed-

eral regulations that relate to the disposal of products that

contain lead, batteries, plastics, etc.

NOTICE: Service charges incurred due to lack of knowl-

edge relating to how a function or effect works (when the

unit is operating as designed) are not covered by the manu-

facturer’s warranty, and are therefore the owners responsi-

bility. Please study this manual carefully and consult your

dealer before requesting service.

NAME PLATE LOCATION: The graphic below indi-

cates the location of the name plate. The model number,

serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number,

and the date of purchase in the spaces provided below and

retain this manual as a permanent record of your purchase.

Model

Serial No.

Purchase Date

92-469-

q (bottom)

SPECIAL MESSAGE SECTION

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

NU1 Owner’s Manual 3

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radia-

tors, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience recepta-

cles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart,

stand, tripod, bracket, or

table specified by the man-

ufacturer, or sold with the

apparatus. When a cart is

used, use caution when

moving the cart/apparatus

combination to avoid injury

from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Ser-

vicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

(UL60065_03)

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifica-

tions not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could

void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these requirements

provides a reasonable level of assurance that your use of this

product in a residential environment will not result in harmful

interference with other electronic devices. This equipment

generates/uses radio frequencies and, if not installed and

used according to the instructions found in the users manual,

may cause interference harmful to the operation of other elec-

tronic devices. Compliance with FCC regulations does not

guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which

can be determined by turning the unit “OFF” and “ON”, please

try to eliminate the problem by using one of the following mea-

sures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distrib-

ute this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America, Elec-

tronic Service Division, 6600 Orangethorpe Ave, Buena Park,

CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park,

Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Hybrid Piano

Model Name : NU1

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception is

suspected.

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

(FCC DoC)

4 NU1 Owner’s Manual

Thank you for choosing the Yamaha Hybrid Piano.

In order to make the most of the performance potential and features of the instrument,

please read the manuals thoroughly,

and keep them in a handy place for later reference.

This instrument, which combines the priceless value of an acoustic piano and versatile digital tech-

nology that provides exceptional flexibility to performers, is a true hybrid piano.

Main Features

Authentic acoustic piano touch with special upright piano action

Featuring a specially designed mechanism in which the keyboard action and the hammer workings real-

istically reproduce those of an acoustic piano, this instrument provides a realistic touch response that is

extraordinarily similar to an upright piano.

CFX Sampling technology

Sophisticated sampling using the latest technology was used to capture the luxurious sounds of

Yamaha’s flagship CFX, a full-sized concert grand piano. The powerful bass and bright, penetrating

midrange sound of the original CFX are reproduced faithfully, and give a particularly natural and well-

balanced overall piano sound.

Best Condition without Tuning

Unlike acoustic pianos, this instrument does not need to be tuned. It always stays perfectly in tune even

after long-time use.

Flexible Volume Control

This instrument gives you full control over the instrument volume, letting you adjust the level just as

desired. Also, you can play or listen in total privacy through one or two pairs of headphones.

Audio Playing and Recording from a USB Flash Memory

Audio files (.wav) saved to a USB flash memory can be played back on the instrument. Moreover, since

you can record your performance as audio data to a USB flash memory device, it is possible to listen to

your performance on portable music players, with the data transferred by computer.

NU1 Owner’s Manual 5

Getting started playing your new Hybrid Piano

Table of Contents

Online Materials

In addition to this manual, the following instructional materials are available.

MIDI Reference

This contains the MIDI Data Format, the MIDI Implementation chart and detailed explanations about the MIDI settings of

the instrument.

MIDI Basics (only in English, French, German and Spanish)

If you want to know more about MIDI and how to use it, refer to this introductory book.

Computer-related Operations

Includes instructions on connecting this instrument to a computer, and operations related to transferring song data.

To obtain these manuals, access the Yamaha Manual Library, enter “NU1” or “MIDI Basics” to the Model Name box, then click

[SEARCH].

Yamaha Manual Library

http://www.yamaha.co.jp/manual/

This section explains how to make detailed settings for the

instrument’s various functions.

This section includes a list of display messages, Quick

Operation Guide and other information.

* This is a quick reference for operation of the functions assigned to the buttons

and keyboard.

PRECAUTIONS ....................................................... 6

Introduction

Panel Controls and Terminals .................................... 8

Playing the Keyboard .................................................. 9

Using the Pedals .....................................................11

Using Headphones (Optional).................................12

I.A. Control (Intelligent Acoustic Control).................12

Advanced Functions

Basic Operations and More ...................................... 13

Selecting a Voice.....................................................13

Listening to the Voice Demo Songs ........................13

Using the Metronome ..............................................14

Changing the Touch Sensitivity...............................15

Adding Variations to the Sound (Reverb)................15

Transposing the Pitch in semitones ........................16

Fine tuning the Pitch................................................16

Setting the Scale Tuning .........................................17

Playing Back Songs .................................................. 18

Songs compatible with this instrument ....................18

Playing back Songs.................................................19

Recording Your Performance ................................... 21

Using USB Flash Memory ......................................... 23

Connecting USB flash memory ...............................23

Formatting USB flash memory ................................24

Copying User Songs in the instrument to a USB

flash memory...........................................................24

Deleting a Song file .................................................25

Backup data and Initializing ..................................... 26

Backup data in internal memory..............................26

Initializing the Backup data......................................26

Connections ............................................................... 27

About MIDI .................................................................. 29

Example for MIDI connection.................................. 29

Local Control on/off.................................................29

Appendix

Message List .............................................................. 30

Troubleshooting......................................................... 31

Maintenance ............................................................... 32

Specifications.............................................................33

Index............................................................................ 34

Quick Operation Guide * ...........................................35

Accessories

Owner’s Manual

“50 greats for the Piano” (Music Book)

AC Power Cord

Felt Key Cover

Felt Strips x 3

Bench*

My Yamaha Product User Registration**

* Included or optional depending on locale.

** The PRODUCT ID on the sheet will be needed when you fill out

the User Registration form

6 NU1 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-

circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators. Also,

do not excessively bend or otherwise damage the cord, or place heavy objects on

it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use only the supplied power cord/plug.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet conditions,

place on it any containers (such as vases, bottles or glasses) containing liquids

which might spill into any openings. If any liquid such as water seeps into the

instrument, turn off the power immediately and unplug the power cord from the AC

outlet. Then have the instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. Then have the device inspected

by Yamaha service personnel.

• The power cord or plug becomes frayed or damaged.

• It emits unusual smells or smoke.

• Some object has been dropped into the instrument.

• There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the

instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector. Doing

so can result in lower sound quality, or possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet, always hold the

plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Read carefully the attached documentation explaining the assembly process.

Failure to assemble the instrument in the proper sequence might result in damage

to the instrument or even injury.

• Do not place the instrument in an unstable position where it might accidentally fall over.

• When transporting or moving the instrument, always use two or more people.

Attempting to lift the instrument by yourself may damage your back, result in

other injury, or cause damage to the instrument itself.

• Before moving the instrument, remove all connected cables, to prevent damage to

the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power cord

from the wall AC outlet.

• Though the wooden parts of this instrument have been designed and produced

with care concerning the environment and human health, in some rare instances

customers may sense an unusual odor or develop irritation in the eyes, due to the

coating material and adhesive.

To avoid this, we recommend that you observe the following:

1. Specially ventilate the room for several days after unpacking and installing this

instrument, since it has been packed in airtight conditions in order to maintain

quality during transportation.

2. If the room housing the instrument is small, continue to ventilate it normally,

either daily or periodically.

3. If you have left the instrument in a closed room for a long time under high

temperature, ventilate the room, then lower the temperature if possible, before

using the instrument.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the desired

listening level.

• Do not insert a finger or hand in any gaps on the fallboard or instrument. Also

take care that the fallboard does not pinch your finger.

• Never insert or drop paper, metallic, or other objects into the gaps on the

fallboard, panel or keyboard. This could cause physical injury to you or others,

damage to the instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing loss.

If you experience any hearing loss or ringing in the ears, consult a physician.

• Do not place the bench in an unstable position where it might accidentally fall over.

• Do not play carelessly with or stand on the bench. Using it as a tool or stepladder

or for any other purpose might result in accident or injury.

• Only one person should sit on the bench at a time, in order to prevent the

possibility of accident or injury.

• If the bench screws become loose due to extensive long-term use, tighten them

periodically using the included tool.

• Keep special watch over any small children so that they don’t fall off the rear of the

bench. Since the bench does not have a backrest, unsupervised use may result in

accident or injury.

Power supply/Power cord

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/Power cord

Assembly

Location

Connections

Handling caution

Using the bench (If included)

DMI-5 1/2

NU1 Owner’s Manual 7

Always turn the power off when the instrument is not in use.

NOTICE

To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio

may generate noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)

to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° –

40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• Bumping the surface of the instrument with metal, porcelain, or other hard objects can cause the finish to crack or peel. Use caution.

• Gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch the instrument's finish.

• During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the instrument. If water is left, the

wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth.

 Saving data

• To protect against data loss through media damage, we recommend that you save your important data onto two USB flash memories.

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal

use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use

others' copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and

sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of

 About functions/data bundled with the instrument

• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.

 About this manual

• The illustrations and displays as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your

instrument.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

Transporting / Installing

If you move to another location, transport the instrument

horizontally. Do not subject the instrument to excessive

vibration or shock.

CAUTION

When moving the instrument, always hold the bottom of

the keyboard unit and the handgrips of the rear side. Be

sure not to hold the headphone jack box. Improper han-

dling can result in damage to the instrument or personal

injury.

Place the instrument away from the wall by at least 10

cm to optimize and enhance the sound effect. If you find

the instrument shaky or unstable after installing, insert

the included felt strips. For details, refer to the

instructions supplied with the felt strips.

Do not hold here.

Do not

hold here.

Rear handgrip

Rear

handgrip

DMI-5 2/2

8 NU1 Owner’s Manual

Panel Controls and Terminals

Overview

Control Panel

q Display ................................................................See below.

w [DEMO/SONG] button............................................. page 13

e [REVERB] button .................................................... page 15

r [METRONOME] button ........................................... page 14

t [PIANO/VOICE] button............................................ page 13

y [FUNCTION] button .............................pages 16, 17 and 29

u [RECORD] button ................................................... page 22

i [+]/[-] button

o [PLAY/STOP] button...................................pages 19 and 22

Display

Indicates various values such as Song number and Parameter value. Note that the display turns dark after the value is

set.

This display also indicates various messages with the three characters. For details, refer to page 30.

Music Rest (pages 9 and 10)

Fallboard

(pages 9 and 10)

Rear surface

[AC IN] jack

(page 9)

Power switch

(page 10)

Pedals (page 11)

Control panel

(see below)

Front surface

Te rm in al s

(page 27)

[MASTER VOLUME]

control (page 10)

[USB TO DEVICE]

terminal (page 23)

[PHONES] jacks

(page 12)

Adjuster

(should be rotated until it comes in

firm contact with the floor surface)

d.01

Song number

Parameter value

Introduction

NU1 Owner’s Manual 9

Playing the Keyboard

1 Set up the power supply.

1-1 On the bottom surface (page 8), insert the power cord plug into the [AC IN] connector.

WARNING

Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used. (The voltage

rating appears on the name plate on the bottom panel). Connecting the unit to an inappropriate AC supply can

seriously damage the internal circuitry and may even pose a shock hazard!

1-2 Insert the plug on the other end of the power cord to a standard AC outlet.

WARNING

• Use only the AC power cord supplied with the instrument. If the supplied

power cord is lost or damaged and needs to be replaced, contact your Yamaha

dealer. The use of an inappropriate replacement can pose a fire and shock haz-

ard!

• The type of AC power cord provided with the instrument may be different

depending on the country in which the instrument was purchased. (In some

areas a plug adaptor may be provided to match the pin configuration of the AC

wall outlets in your area.) Do NOT modify the plug provided with the instru-

ment. If the plug does not fit the outlet, have a proper outlet installed by a qual-

ified electrician.

2 With both hands, hold the hand grip, then lift and

open the fallboard.

CAUTION

• Hold the fallboard with both hands when opening or closing it. Do not

release it until it is fully opened or closed. Be careful to avoid catching

fingers (yours or others, especially children’s) between the fallboard

and the unit.

3 Fold down the top of the fallboard, then open the

music rest and put the score on it.

AC IN

AC IN connector

The shape of the plug differs

depending on your locale.

CAUTION

Be careful to avoid catch-

ing your fingers between

the fallboard and the

instrument.

Playing the Keyboard

10 NU1 Owner’s Manual

4 On the right of the keyboard, press the [ ] switch to turn on the power.

The lamp located as shown below lights up, the display (page 8) indicates “

nU1

” for a while, then the instru-

ment starts up.

NOTICE

Do not press any keys until the instrument has completely started up (approx. four seconds after turning on the switch).

Doing so may cause some keys to not sound normally.

5 Play the keyboard.

To adjust the volume:

Use the [MASTER VOLUME] control (page 8) located at the front left, just below the keyboard.

CAUTION

Avoid using this instrument at a high volume level for a long period of time, to prevent hearing damage.

6 Press the [ ] switch again to turn off the power.

The power lamp turns off.

CAUTION

A small amount of electrical current remains even after the power switch is turned off. If you plan not to use the instrument

for a long period of time, be sure to unplug the instrument from the AC outlet.

7 Close the music rest.

If you omit this operation and close the fallboard, the music

rest will hit the keyboard and may result in damage.

8 With both hands, open the folded top of the

fallboard, and close it gently.

MAXMIN

MASTER VOLUME

Power switch

The lamp lights up.

MAX

USB TO

MIN

MASTER VOLUME

The level increases. The level decreases.

CAUTION

Be careful to avoid catching your fingers

between the fallboard and the instrument.

Playing the Keyboard

NU1 Owner’s Manual 11

The instrument has three pedals that produce a range of expressive effects similar to those produced by the pedals on

an acoustic piano.

Damper Pedal (Right)

Pressing this pedal will sustain notes longer. Releasing this pedal immediately stops

(damps) any sustained notes. A “half-pedal” function of this pedal creates partial sus-

tain effects, depending on how far down you press the pedal.

 Half-pedal function

This function allows the sustain length to vary depending on how far the pedal is

pressed. The farther you press the pedal, the more the sound sustains. For example, if

you press the damper pedal and all notes you are playing sound a bit murky and loud

with too much sustain, you can release the pedal half way to subdue the sustain (murk-

iness).

 To set the Half Pedal Point:

While holding down [PIANO/VOICE], press one of the A#5–E6 keys. This operation

sets the degree to which pressing the damper pedal applies the half-pedal effect. The

smaller the value, the shallower the half-pedal point. The larger the value, the deeper

the half-pedal point.

Setting range: -2 (A#5) – 0 (C6) – 4 (E6)

Default Setting: 0

Sostenuto Pedal (Center)

Pressing this pedal while holding the notes will sustain the pressed notes (as if the

damper pedal had been pressed), but all subsequently played notes will not be sus-

tained. This makes it possible to sustain a chord, for example, while the other notes are

played “staccato.”

Soft Pedal (Left)

Pressing this pedal will reduce the volume and slightly change the timbre of the notes.

The notes played before this pedal is pressed are not affected.

Using the Pedals

GP Responsive Damper Pedal

This special pedal has been designed to provide enhanced tactile response and, when

pressed, is much closer in feel to the pedal of an actual grand piano. It makes it easier

to physically experience the half-pedal point and more easily apply the half-pedal

effect than other pedals.

If you press and hold the

damper pedal here, all the

notes shown will be sus-

tained.

A#5

If you press and hold the soste-

nuto pedal here, only the notes

held at this timing will be sus-

tained.

Playing the Keyboard

12 NU1 Owner’s Manual

Since this instrument is equipped with two [PHONES]

jacks, you can connect two sets of standard stereo head-

phones. If you are using only one set of headphones,

insert a plug into either jack, shutting off the speakers.

CAUTION

Avoid listening to the instrument at a high volume level

through headphones for a long period of time, to prevent

hearing damage.

This function automatically adjusts and controls the sound quality according to the overall volume of the instrument.

Even when the volume is low, it permits both low sounds and high sounds to be clearly heard. Note that the I.A. Con-

trol is effective only from the sound output of the instrument speakers.

 To turn on/off the I.A. Control:

While holding down [FUNCTION], press the C0 key repeatedly (as necessary).

Default setting: On

 To adjust the I.A. Control Depth:

While holding down [FUNCTION], press one of the keys between A0–D#1.

Setting range: -3 (A0) – 0 (C1) – 3 (D#1)

Default setting: 0 (C1)

The higher the value, the more clearly that low and high sounds are heard at lower volume levels.

Using Headphones (Optional)

I.A. Control (Intelligent Acoustic Control)

MAX

PHONES USB TO DEVICE

MIN

MASTER VOLUME

Standard stereo phone

plug

C0 C1

(0)

(-3)

D#1 (3)

NU1 Owner’s Manual 13

Basic Operations and More

Selecting a Voice

 To select the Grand Piano 1 Voice:

Simply press [PIANO/VOICE].

 To select a different Voice:

While holding down [PIANO/VOICE], press [+] or [-].

Voice Li st

Listening to the Voice Demo Songs

Demo Songs effectively demonstrate each of this instrument’s Voices.

1 Select the Voice for the Demo Song that you want to listen to.

2 Press [DEMO/SONG].

The Demo Song for the Voice selected in Step 1 starts.

To change the Demo Song during playback:

Press [+] or [-].

To adjust the playback tempo:

While holding down [METRONOME], press TEMPO [+] or [-].

3 Press [DEMO/SONG] again to stop playback.

Demo Song List

The

d.01

and

d.05

Songs are re-arranged excerpts from the original compositions.

Display Voice name Descriptions

Grand Piano 1

Recorded samples from a full concert grand piano. Perfect for clas-

sical compositions as well as any other style that requires acoustic

piano.

Grand Piano 2

Spacious and clear piano with bright reverb. Good for popular

music

E.Piano 1 Created by FM synthesis. Good for popular music.

E.Piano 2

Simulates the sound of hammer-struck metallic “tines.” Soft tone

when played lightly, and an aggressive tone when played hard.

Harpsichord

The definitive instrument for baroque music. Since the strings of an

actual harpsichord are plucked, there is no touch response.

NOTE

You can play the keyboard along with the

demo song.

NOTE

No MIDI data will be output during Voice

Demo playback.

Display Voice Name Title Composer

d.01

Grand Piano 1 Prélude, Suite bergamasque C. A. Debussy

d.02

Grand Piano 2 — —

d.03

E.Piano 1 — —

d.04

E.Piano 2 — —

d.05

Harpsichord

Concerto a cembalo obbligato, 2 violini,

viola e continuo No.7, BWV.1058

J. S. Bach

Advanced Functions

Basic Operations and More

14 NU1 Owner’s Manual

Using the Metronome

The metronome feature is convenient for practicing with an accurate tempo.

1 Press [METRONOME] to start the metronome.

While the metronome sounds, a dot at the right side of the LED display and the

lamp of the metronome button flash on and off to the tempo.

2 Press [METRONOME] again to stop the metronome.

Adjusting the Tempo

During the operation described below, you can check the tempo value shown on the

display.

 To increase or decrease the value by 1:

While holding down [METRONOME], press [+] (or C#5 key) or [-] (or B4 key). Dur-

ing playback, simply press [+] or [-].

 To increase or decrease the value by 10:

While holding down [METRONOME], press the D5 or A#4 key.

 To reset the value to the default (120):

While holding down [METRONOME], press the C5 key or press [+] and [-] simulta-

neously. During playback, press both [+] and [-] simultaneously.

Selecting the Beat

While holding down [METRONOME], press one of the C3–F3

keys. The selected value is shown on the display while both

controls are held.

Only the first beat is accented with a bell sound when set to a value other than 0.

Adjusting the Metronome volume

While holding down [METRONOME], press one of the C1–G2 keys to set the vol-

ume. The specified value is shown on the display while both controls are held.

120.

The beat lamp flashes

at the current tempo

Setting range: 5 to 500 beats per minute

Default setting: 120

NOTE

The metronome tempo is restored to the

default setting when the power is turned off.

C5 D5B4

A#4C#5

Default setting: 0 (No downbeat)

NOTE

The Beat of the metronome is restored to

the default setting when the power is turned

off.

Display Key Beat Display Key Beat

C3 0 (no downbeat)

D#34

C#3 2

E3 5

D3 3

F3 6

Beat

C3 F3

Setting range: 1–20

Default setting: 15

NOTE

The metronome volume setting is retained

even when the power is turned off.

C1 (1) G2 (20)D2 (15)

The volume level increases as you press higher keys

max.min.

Basic Operations and More

NU1 Owner’s Manual 15

Changing the Touch Sensitivity

You can specify the Touch Sensitivity (how the sound responds to the way you play the keys).

While holding down [PIANO/VOICE], press one of the A6–C7 keys. The selected

Touch Sensitivity is shown on the display while both controls are held.

Adding Variations to the Sound (Reverb)

The Reverb effect reproduces the realistic acoustic ambience of grand piano.

To turn on or off the Reverb:

Press [REVERB] repeatedly (as necessary).

To adjust the Reverb Depth:

While holding down [REVERB], press [+] or [-]. The current value is shown on the

display while both controls are held.

To restore the default value (2), press [+] and [-] simultaneously while holding

[REVERB].

A6 C7

Default setting: 2 (Medium)

NOTE

The touch type is restored to the default

setting when the power is turned off.

NOTE

This setting does not change the weight of

the keyboard, but only the response.

Display Key Touch Sensitivity Descriptions

OFF

A6 Fixed

The volume level does not change at all regardless of

whether you play the keyboard soft or hard.

A#6 Soft

The volume level does not change much when you play the

keyboard soft or hard.

B6 Medium This is the standard piano touch response.

C7 Hard

The volume level changes very widely from pianissimo to

fortissimo to facilitate dynamic and dramatic expression. You

have to hit the keys hard to produce a loud sound.

Lights up when REVERB is on.

Setting range: 1–20

Default setting: 2

NOTE

The Reverb Depth is restored to the default

setting when the power is turned off.

NOTE

Holding [REVERB] shows the Reverb Depth

value on the display.

Basic Operations and More

16 NU1 Owner’s Manual

Transposing the Pitch in semitones

You can shift the pitch of the entire keyboard up or down in semitones to facilitate playing in difficult key signatures

and match the pitch of the keyboard to the range of a singer or other instruments. For example, if “+5” is selected,

playing the key C produces a pitch of F, letting you play a song of F major as though it were in C major.

 To transpose the pitch down:

While holding down [FUNCTION], press a key between F#2 (-6) and B2 (-1).

 To transpose the pitch up:

While holding down [FUNCTION], press a key between C#3 (+1) and F#3 (+6).

 To restore the original pitch:

While holding down [FUNCTION], press the C3 key.

The specified value is shown on the display.

Fine tuning the Pitch

You can fine-tune the pitch of the entire instrument. This function is useful when you play this instrument along with

other instruments or recorded music.

During the operation described below, you can check the Pitch

value shown on the display.

 To tune up (in roughly 0.2Hz steps):

While holding down [FUNCTION], press [+]. Holding down

both buttons shows the current pitch setting (Hz).

 To tune down (in roughly 0.2Hz steps):

While holding down [FUNCTION], press [-]. Holding down both buttons shows the

current pitch setting (Hz).

 To restore standard pitch:

While holding down [FUNCTION], press [+] and [-] simultaneously. Holding down

all three buttons shows the current pitch setting (Hz).

Default setting: 0 (Normal pitch)

Setting range: -6 – 6

NOTE

The Transpose value is restored to the

default setting when the power is turned off.

F#3F#2

0-1

-2 +1 +3-4

-3-5 +2+4+5

-6 +6

Transpose up.

Transpose down.

Normal pitch

NOTE

The tuning value is retained even when the

power is turned off.

Hz (Hertz):

This unit of measurement refers to the fre-

quency of a sound and represents the num-

ber of times a sound wave vibrates in a

second.

Setting range: 414.8–466.8Hz (=A3)

Default setting: 440.0Hz (=A3)

42.0

Example: 442Hz

Basic Operations and More

NU1 Owner’s Manual 17

Setting the Scale Tuning

You can select various scales for the instrument. Equal Temperament is the most common contemporary piano tuning

scale. However, history has known numerous other scales, many of which serve as the basis for certain genres of

music. This feature lets you experience the tunings of these genres.

Selecting a Scale

While holding down [FUNCTION], press one of the C5–F#5 keys. Holding down

both controls shows the current value on the display.

Selecting the Base Note

While holding down [FUNCTION], press one of the C4–B4 keys. Holding down both

controls shows the current value on the display.

Default setting: 1 (Equal)

NOTE

The scale is restored to the default setting

when the power is turned off.

Display Key Scale Description

C5 Equal

The pitch range of each octave is divided equally into twelve

parts, with each half-step evenly spaced in pitch. This is the

most commonly used tuning in music today.

C#5 Pure Major These tunings preserve the pure mathematical intervals of

each scale, especially for triad chords (root, third, fifth). You can

hear this best in actual vocal harmonies — such as choirs and

a cappella singing.

D5 Pure Minor

D#5 Pythagorean

This scale was devised by the famous Greek philosopher and

is created from a series of perfect fifths, which are collapsed

into a single octave. The 3rd in this tuning are slightly unstable,

but the 4th and 5th are beautiful and suitable for some leads.

E5 Mean-Tone

This scale was created as an improvement on the Pythagorean

scale, by making the major third interval more “in tune.” It was

especially popular from the 16th century to the 18th century.

Handel, among others, used this scale.

F5 Werckmeister

This composite scale combines the Werckmeister and Kirn-

berger systems, which were themselves improvements on the

mean-tone and Pythagorean scales. The main feature of this

scale is that each key has its own unique character. The scale

was used extensively during the time of Bach and Beethoven,

and even now it is often used when performing period music on

the harpsichord.

F#5 Kirnberger

F#5

Default setting: C

NOTE

The base note is restored to the default set-

ting when the power is turned off.

Key Base Note Key Base Note Key Base Note Key Base Note

C4 C D#4Eb F#4F# A4 A

C#4 C# E4 E G4 G A#4 Bb

D4 D F4 F G#4Ab B4 B

B4C4

F~ G A_

Example:

(Followed by a high bar if sharp)

GAb

(Followed by a low bar if flat)

18 NU1 Owner’s Manual

Playing Back Songs

This instrument can play back Songs contained in internal memory or USB memory connected to the [USB TO

DEVICE] terminal. There are two kinds of Songs that can be played back: MIDI Songs and Audio Songs.

MIDI Songs and Audio Songs

A MIDI Song contains data of your keyboard performance (such as which keys you played and how hard you played

them), and is not a recording of the actual sound itself. The performance information refers to which keys are played,

at what timing, and at what strength—just as in a musical score. Based on the recorded performance information, the

tone generator (of the digital piano, etc.) outputs the corresponding sound. A MIDI Song uses a small amount of data

capacity in comparison to audio recording.

An Audio Song is a recording of the performed sound itself. This data is recorded in the same way as that used in

recording cassette tapes, or with voice recorders, etc. This data can be played with a portable music player, etc.,

allowing you to easily let other people hear your performance.

Songs compatible with this instrument

Song Category List

* Shown only when USB flash memory is connected.

** When data does not exist, the song number is not displayed.

Song data formats that can be played

 SMF (Standard MIDI File) Formats 0 and 1

One of the most common and widely compatible MIDI formats used for storing

sequence data. MIDI Songs recorded in this instrument are saved as SMF Format 0.

 WAV format (.wav)

Audio file format commonly used by computers. This instrument can play 44.1kHz/

16bit stereo WAV files. Audio Songs recorded on this instrument are saved in this for-

mat.

User Songs and External Songs

Songs recorded by this instrument are

called “User Songs” while Songs created in

other ways or on other instruments are

called “External Songs.” In USB flash

memory, Songs in the USER FILES folder

are handled as User Songs while Songs in

a location other than the USER FILES folder

are handled as External Songs. When you

record a Song to USB flash memory, a

USER FILES folder is created automatically

and the resulting User Song will be saved

in this folder.

NOTE

[xx] indicates numerals.

Song Category

Song

Number

Descriptions

Voice Demo Song

(MIDI Song)

d.01

–

d.05

Each Song effectively demonstrates each of this

instrument’s Voices.

Preset Song

(MIDI Song)

P.01

–

P.50

50 Piano Preset Songs in the instrument. These cor-

respond to the scores in the book “50 greats for the

Piano,” included for your convenience and enjoy-

ment.

xx*

Audio Song in USB

flash memory

A.00

–

A.99

User Songs which have been recorded with this

instrument (page 24)

C.00

–

C.99

External Songs, commercially available or which

have been recorded on a computer, etc.

xx*

MIDI Song in USB

flash memory

S.00

–

S.99

User Songs which have been recorded with this

instrument (page 24)

F.00

–

F.99

External Songs, commercially available or which

have been recorded on a computer, etc.

MIDI Song in this

instrument

U.01

–

U.10

User Songs which have been recorded to the instru-

ment (page 21)

L.00

–

L.99

External Songs (commercially available or which

have been recorded on a computer, etc.) transferred

from a computer to this instrument.

Playing Back Songs

NU1 Owner’s Manual 19

Playing back Songs

While holding down [DEMO/SONG], press [+] or [-] until the

desired Song Category (page 18) appears on the display.

The Song Categories will appear on the display in the following order:

xx  (

xx)  (

xx) 

xx 

xx  etc. If you wish to play back a

“

xx,” “

xx,” or “

xx” song, select the Song Category “

xx,” “

xx,” or “

xx.”

2 Press [+] or [-] to select the desired Song number, or “*

.rd

”

(random) or “*

.AL

”(all).

To select “

xx,” “

xx,” or “

xx,” continue holding down [+] until they appear,

or press [-] repeatedly. “

xx” will appear after “

A.99

,” “

xx” will appear after

“

S.99

,” and “

xx” will appear after “

U.10

” on the display. (When data does not

exist, the song number is not displayed.)



When a specific Song number (such as

P.01

and

U.01

) is selected:

Only the selected Song will be played back.

 When “*

.rd

” or “*

.AL

” is selected:

.rd

........ Plays back the Songs of this type continuously in random order.

.AL

........ Plays back all the Songs of this type continuously in sequential order.

The asterisk (*) indicates “

,”“

,” or “

” designations in the display.

For details, refer to page 18.

3 Press [PLAY/STOP] to start playback.

During playback, the current measure number (in the case of MIDI Songs) or

playing time (in the case of Audio Songs) is shown on the display.

Adjusting the tempo (only for MIDI Songs)

While holding down [METRONOME], press [+] or [-] to adjust the tempo. To

reset the tempo to default, press [+] and [-] simultaneously while holding down

[METRONOME]. For details, refer to page 14.

Adjusting the volume (only for Audio Songs)

The volume level of this instrument may be markedly different from that of a

commercially available Audio Song or one recorded on another device. To adjust

the volume of the Audio Song, hold down [DEMO/SONG] and press one of the

C1–G2 keys.

Rewind/Fast forward

During playback, press [-] or [+] to move back or forth through the measures.

Returning to the Song Top

During playback, press [-] and [+] simultaneously to jump to the top of the Song.

To play back a Song on a USB flash memory:

Read “Connecting USB flash memory” (page 23), then connect the USB flash memory to the [USB TO DEVICE] ter-

minal, and follow the instructions below.

NOTE

“

xx” and “

xx” are shown only when

USB flash memory is connected.

NOTE

Song indications such as “

F.00

” and

“

C.00

” may not appear immediately

depending on the amount of the folders in

the USB flash memory.

NOTE

The metronome can be used during play-

back. It will automatically stop when play-

back is stopped.

NOTE

When playing back MIDI Songs containing

Voices that are incompatible with this

instrument such as XG and GM Songs, the

Voices may not sound as intended on the

original. In addition, Song data of the MIDI

channels 3 – 16 cannot be played back

because this instrument can recognize only

the MIDI channels 1 and 2. This is why you

should only play back Songs which have

data of only MIDI channels 1 – 2, to which

the piano performance is assigned.

NOTE

You can play the keyboard along with Song

playback. You can also change the Voice

for your keyboard performance.

1. 2. 0.01. 0.02.

MIDI Song

Current measure

number

Audio Song

Playing time

Indicates minutes. In

case of 10 minutes or

more, only the low-

est digit is shown.

Indicates

seconds.

Setting range: 1 – 20

Default setting: 16

C1 (1) G2 (20)A1 (10)

The higher the key, the greater the volume.

max. min.

Playing Back Songs

20 NU1 Owner’s Manual

4 Press [PLAY/STOP] again to stop playback.

If a specific Song number is selected in Step 2, playback stops automatically by

reaching the end of the Song.

Setting range: JA (Japanese) / Int (Interna-

tional)

Default setting: Int

Setting the Character Code

If the Song cannot be called up, you may need to select the appropriate Character

Code from the following two settings.

 International

For playing back Songs with names using western European characters (including

umlaut or diacritic marks). To select this, turn on the power while holding down the

A-1 and A#-1 keys.

 Japanese

For playing back Songs with names using Japanese characters. To select this, turn on

the power while holding down the A-1 and B-1 keys.

A#-1A-1

B-1A-1

La pagina sta caricando ...

Yamaha NU1 Manuale del proprietario

Marca: Yamaha

Modello: NU1

Categoria: Tastiere

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Yamaha NU1 Owner's manual
français: Yamaha NU1 Le manuel du propriétaire
español: Yamaha NU1 El manual del propietario
Deutsch: Yamaha NU1 Bedienungsanleitung
русский: Yamaha NU1 Инструкция по применению
Nederlands: Yamaha NU1 de handleiding
português: Yamaha NU1 Manual do proprietário
dansk: Yamaha NU1 Brugervejledning
čeština: Yamaha NU1 Návod k obsluze
polski: Yamaha NU1 Instrukcja obsługi
svenska: Yamaha NU1 Bruksanvisning
日本語: Yamaha NU1 取扱説明書
Türkçe: Yamaha NU1 El kitabı
suomi: Yamaha NU1 Omistajan opas
română: Yamaha NU1 Manualul proprietarului

Yamaha NU1 Manuale del proprietario

Yamaha NU1 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti