Yamaha SC2 Manuale del proprietario

Marca: Yamaha

Modello: SC2

Tipo: Manuale del proprietario

SC2

Owner’s Manual

Mode d’emploi

Manual de instrucciones

Bedienungsanleitung

Manuale di istruzioni

툲󻼰튪찋튢

Before using the instrument, be sure to read “PRECAUTIONS” on pages 7-8.

Avant d’utiliser cet instrument, lisez attentivement la section « PRÉCAUTIONS D’USAGE » aux pages 7-8.

Antes de utilizar el instrumento, lea la sección “PRECAUCIONES”, en las páginas 7-8.

Achten Sie darauf, vor Einsatz dieses Instruments die „VORSICHTSMASSNAHMEN“ auf Seiten 7-8 durchzulesen.

Prima di utilizzare lo strumento, assicurarsi di leggere la sezione “PRECAUZIONI”, alle pagine 7 - 8.

훋뾶쬂툲󻼰뾶󼂋흖ˊ󻿻󼉇󻿟훎󼂋󼆃󻿟툲󻿋삳󼀄󻿃푳푢힪

SC2 Owner’s Manual

For the instrument

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power supply or

adapter other than one described in the manual, on the name

plate, or specifically recommended by Yamaha.

WARNING: Do not place this product in a position where

anyone could walk on, trip over, or roll anything over power or

connecting cords of any kind. The use of an extension cord is

not recommended! If you must use an extension cord, the mini-

mum wire size for a 25’ cord (or less) is 18 AWG. NOTE: The

smaller the AWG number, the larger the current handling capac-

ity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied

or; a cart, rack, or stand that is recommended by Yamaha. If a

cart, etc., is used, please observe all safety markings and

instructions that accompany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be cor-

rect at the time of printing. However, Yamaha reserves the right

to change or modify any of the specifications without notice or

obligation to update existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound

levels that could cause permanent hearing loss. DO NOT oper-

ate for long periods of time at a high volume level or at a level

that is uncomfortable. If you experience any hearing loss or ring-

ing in the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period

before damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be

dealer assembled or installed. Please make sure that benches

are stable and any optional fixtures (where applicable) are well

secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No

other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to

how a function or effect works (when the unit is operating as

designed) are not covered by the manufacturer’s warranty, and

are therefore the owners responsibility. Please study this manual

carefully and consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and

environmentally friendly. We sincerely believe that our products

and the production methods used to produce them, meet these

goals. In keeping with both the letter and the spirit of the law, we

want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life span

of this type of battery is approximately five years. When replace-

ment becomes necessary, contact a qualified service represen-

tative to perform the replacement.

This product may also use “household” type batteries. Some of

these may be rechargeable. Make sure that the battery being

charged is a rechargeable type and that the charger is intended

for the battery being charged.

When installing batteries, never mix old batteries with new ones,

and never mix different types of batteries. Batteries MUST be

installed correctly. Mismatches or incorrect installation may

result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep

all batteries away from children. Dispose of used batteries

promptly and as regulated by the laws in your area. Note: Check

with any retailer of household type batteries in your area for bat-

tery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for

some reason its useful life is considered to be at an end, please

observe all local, state, and federal regulations that relate to the

disposal of products that contain lead, batteries, plastics, etc. If

your dealer is unable to assist you, please contact Yamaha

directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The

model number, power requirements, etc., are located on this

plate. The serial number is located behind the control unit. You

should record the model number, serial number, and the date of

purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom_silent)

SC2 Owner’s Manual

For the instrument

* This applies only to products distributed by Yamaha Corporation of America.

COMPLIANCE INFORMATION STATEMENT (Supplierʼs declaration of conformity procedure)

Responsible Party: Yamaha Corporation of America

Address: 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone: 714-522-9011

Type of Equipment: Silent Piano

Model Name: B1SC2, B2SC2, B3SC2, GB1KSC2, P22SC2, RSC2-1, RSC2-3,

RSC2-5, RSC2-10, RSC2-30

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that may cause undesired operation.

(FCC SDoC)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifica-

tions not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could

void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these require-

ments provides a reasonable level of assurance that your

use of this product in a residential environment will not result

in harmful interference with other electronic devices. This

equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the

users manual, may cause interference harmful to the opera-

tion of other electronic devices. Compliance with FCC regula-

tions does not guarantee that interference will not occur in all

installations. If this product is found to be the source of inter-

ference, which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by using one of

the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distrib-

ute this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America,

Electronic Service Division, 6600 Orangethorpe Ave, Buena

Park, CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

For the AC adaptor and the instrument

SC2 Owner’s Manual

The model number, power requirements, etc., are located on the

name plate, which is at the bottom of the control unit. The serial num-

ber is located behind the control unit. You should note this serial num-

ber in the space provided below and retain this manual as a

permanent record of your purchase to aid identification in the event of

theft.

Model No.

Serial No.

(bottom_en_silent)

The name plate is located on the bottom of the unit.

La plaque signalétique de ce produit se trouve dans le bas de l'unité.

La placa del nombre se encuentra en la parte inferior de la unidad.

Das Namensschild befindet sich an der Unterseite des Produkts.

La targhetta del nome si trova sul fondo dell'unità.

명판은 제품 밑면에 부착되어 있습니다 .

Le numéro de modèle de l'appareil, ses besoins en alimentation ainsi

que d'autres informations le concernant figurent sur sa plaque

signalétique, qui se trouve en bas de l'unité de commande. Le numéro

de série est indiqué à l’arrière de l’unité de commande. Notez ce

numéro de série dans l'espace fourni ci-dessous et conservez le

présent manuel comme preuve permanente de votre achat afin de

faciliter l'identification du produit en cas de vol.

N° de modèle

N° de série

(bottom_fr_silent)

El número de modelo, los requisitos de alimentación, etc. se

encuentran en la placa de denominación, que está en la parte inferior

de la unidad de control. El número de serie se encuentra detrás de la

unidad de control. Debe anotar este número de serie en el espacio

que se proporciona a continuación y conservar este manual como un

registro permanente de su compra para facilitar la identificación en

caso de robo.

Nº de modelo

Nº de serie

(bottom_es_silent)

Modellnummer, Leistungsbedarf usw. sind auf dem Namensschild

aufgeführt, das sich an der Unterseite der Steuereinheit befindet. Die

Seriennummer befindet sich an der Rückseite der Steuereinheit. Für

den Fall eines Diebstahls sollten Sie diese Seriennummer im unten

vorgesehenen Feld eintragen und diese Anleitung als dauerhaften

Kaufnachweis aufbewahren.

Modell Nr.

Seriennr.

(bottom_de_silent)

Il numero del modello, i requisiti di alimentazione, ecc… si trovano

sulla piastrina posizionata nella parte inferiore dell'unità di controllo. Il

numero di serie si trova dietro l'unità di controllo. Si consiglia di

riportare il numero di serie nell'apposito spazio di seguito e di

conservare questo manuale come prova di acquisto permanente, al

fine di consentire l'identificazione in caso di furto.

Numero del modello

Numero di serie

(bottom_it_silent)

본 제품의 모델 번호 , 전원 규격 등은 기기 밑면에 있는

명판에서 확인할 수 있습니다 . 일련 번호는 기기 후면에

있습니다 . 도난 시 확인할 수 있도록 일련 번호를 아래 공란에

기입하고 본 사용설명서를 구매 기록으로 영구 보관해야

합니다 .

모델 번호

일련 번호

(bottom_ko_silent)

SC2 Owner’s Manual

English

SC2

Table of Contents

PRECAUTIONS...........................................................7

NOTICE ........................................................................9

About the Manuals ....................................................10

Included Accessories .................................................10

Features........................................................................11

Chapter 1 Getting Started ................... 12

Part names...................................................................12

Turning the power on/off .........................................14

Using headphones......................................................15

Chapter 2 Playing with the Silent Piano™

Function.............................. 16

Using the Silent Piano™ function .............................16

Selecting Voices..........................................................17

Using the metronome................................................19

Chapter 3 Recording and Playback..... 22

Recording your performance to internal memory

(MIDI recording) .......................................................22

Playing back the MIDI Song recorded to internal

memory .......................................................................23

Recording your performance to a USB flash drive

(Audio recording) ......................................................24

Playing back an Audio Song recorded to the USB

flash drive ....................................................................24

Connecting USB devices ...........................................25

Playing back the Voice Demo Songs .......................26

Playing back the Preset Songs ..................................27

Operations during playback .....................................28

Adjusting the playback tempo..................................29

Chapter 4 Connecting to Other Devices

............................................. 30

Connecting to external audio devices ([AUX IN]

jack)..............................................................................30

Connecting to a computer/smart device ................31

Chapter 5 Using Other Functions....... 33

Setting the various convenient functions ...............33

Backup data and initialization..................................40

Chapter 6 Appendix ............................ 41

Troubleshooting.........................................................41

Specifications .............................................................42

Song List......................................................................43

Quick Operation Guide.............................................44

Index ............................................................................45

Owner’s Manual

SC2 Owner’s Manual

For the AC adaptor

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

(can_b_02)

CAN ICES-3 (B)/NMB-3(B)

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol within

an equilateral triangle is intended to alert the user

to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the presence

of important operating and maintenance

(servicing) instructions in the literature

accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use caution

when moving the cart/apparatus

combination to avoid injury from

tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

(fcc_sengen-c)

(weee_eu_en_02)

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should

not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your

national legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service

or the point of sale where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and

ask for the correct method of disposal.

SC2 Owner’s Manual

English

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

• This AC adaptor is designed for use with only Yamaha electronic

devices. Do not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If

some trouble or malfunction occurs, immediately turn off the power

switch of the instrument and disconnect the AC adaptor from the

outlet. When the AC adaptor is connected to the AC outlet, keep in

mind that electricity is flowing at the minimum level, even if the

power switch is turned off. When you are not using the instrument

for a long time, make sure to unplug the power cord from the wall

AC outlet.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or

radiators. Also, do not excessively bend or otherwise damage the

cord, or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The

required voltage is printed on the name plate of the instrument.

• Use the specified adaptor (page 42) only. Using the wrong adaptor

can result in damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust

which may have accumulated on it.

• Unplug the power cord from the AC outlet when cleaning the

instrument.

• This instrument contains no user-serviceable parts. Do not open the

instrument or attempt to disassemble or modify the internal

components in any way. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualified

Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or

wet conditions, or place on it any containers (such as vases, bottles

or glasses) containing liquids which might spill into any openings.

If any liquid such as water seeps into the instrument, turn off the

power immediately and unplug the power cord from the AC outlet.

Then have the instrument inspected by qualified Yamaha service

personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the

power switch and disconnect the electric plug from the outlet. Then

have the device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

For the AC adaptor

For the instrument

Power supply/AC adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

DMI-5 1/2

SC2 Owner’s Manual

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a

multiple-connector. Doing so can result in lower sound quality, or

possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet,

always hold the plug itself and not the cord. Pulling by the cord can

damage it.

• Remove the electric plug from the outlet when the instrument is not

to be used for extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Before moving the instrument, remove all connected cables, to

prevent damage to the cables or injury to anyone who might trip

over them.

• When moving the instrument, be careful to avoid catching your

hands or feet on the instrument.

• Move the instrument slowly with extra care to keep the instrument

from falling over, or bumping against the surroundings. We

recommend that you consult a qualified carrier to transport or move

the instrument.

• When setting up the product, make sure that the AC outlet you are

using is easily accessible. If some trouble or malfunction occurs,

immediately turn off the power switch and disconnect the plug from

the outlet. Even when the power switch is turned off, electricity is

still flowing to the product at the minimum level. When you are not

using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Before connecting the instrument to other electronic components,

turn off the power for all components. Before turning the power on

or off for all components, set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum

levels and gradually raise the volume controls while playing the

instrument to set the desired listening level.

• Do not insert a finger or hand in any gaps on the fallboard or

instrument. Also take care that the fallboard does not pinch your

finger.

• Never insert or drop paper, metallic, or other objects into the gaps or

opening on the main unit, fallboard, or keyboard. This could cause

physical injury to you or others, damage to the instrument or other

property, or operational failure.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the buttons, switches

or connectors.

• Do not use the instrument/device or headphones for a long period of

time at a high or uncomfortable volume level, since this can cause

permanent hearing loss. If you experience any hearing loss or

ringing in the ears, consult a physician.

• Close the fallboard when the instrument is not in use. Hold the

fallboard with both hands when opening or closing it. Be careful to

avoid catching fingers (yours or others) between the fallboard and

the main unit.

• Do not go near the instrument during an earthquake. Strong shaking

during an earthquake could cause the instrument to move or tip

over, resulting in damage to the instrument or its parts, and possibly

causing injury.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Power supply/AC adaptor

Location

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-5 2/2

SC2 Owner’s Manual

English

NOTICE

To avoid the possibility of malfunction/ damage to

the product, damage to data, or damage to other

property, follow the notices below.

 Handling

• Do not connect this product to public Wi-Fi and/

or Internet directly. Only connect this product to

the Internet through a router with strong

password-protections. Consult your router

manufacturer for information on security best

practices.

• Do not use the instrument in the vicinity of a TV,

radio, stereo equipment, mobile phone, or other

electric devices. Otherwise, the instrument, TV, or

radio may generate noise. When you use the

instrument along with a smart device, such as an

iPhone, iPad, etc., we recommend that you set that

device’s “Airplane Mode” to on and then the Wi-Fi

setting to on in order to avoid noise caused by

communication.

• Do not expose the instrument to excessive dust or

vibrations, or extreme cold or heat (such as in

direct sunlight, near a heater, or in a car during the

day) to prevent the possibility of panel

disfiguration, damage to the internal components

or unstable operation.

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or

keyboard.

• Bumping the surface of the instrument with metal,

porcelain, or other hard objects can cause the

finish to crack or peel. Use caution.

• Do not drag the instrument when moving it.

Doing so may damage the floor.

 Maintenance

• When cleaning the instrument, use a soft and dry

cloth. Do not use paint thinners, solvents, alcohol,

cleaning fluids, or chemical-impregnated wiping

cloths.

• Gently remove dust and dirt with a soft cloth. Do

not wipe too hard since small particles of dirt can

scratch the instrument's finish.

• During extreme changes in temperature or

humidity, condensation may occur and water may

collect on the surface of the instrument. If water is

left, the wooden parts may absorb the water and be

damaged. Make sure to wipe any water off

immediately with a soft cloth.

 Saving data

• The MIDI Song recorded to this instrument

(page 22) are retained when the power is turned

off. However, the saved data may be lost due to

some failure, an operation mistake, etc. Save your

important data onto an external device such as a

computer (page 31).

• To protect against data loss through USB flash

drive damage, we recommend that you save your

important data onto spare USB flash drive or an

external device such as a computer as backup data.

Information

 About copyrights

• Copying of the commercially available musical

data including but not limited to MIDI data and/or

audio data is strictly prohibited except for your

personal use.

• This product incorporates and bundles contents in

which Yamaha owns copyrights or with respect to

which Yamaha has license to use others'

copyrights. Due to copyright laws and other

relevant laws, you are NOT allowed to distribute

media in which these contents are saved or

recorded and remain virtually the same or very

similar to those in the product.

* The contents described above include a computer

program, Accompaniment Style data, MIDI data,

WAVE data, voice recording data, a score, score

data, etc.

* You are allowed to distribute medium in which

your performance or music production using

these contents is recorded, and the permission of

Yamaha Corporation is not required in such

cases.

 About functions/data bundled with

the instrument

• Some of the preset songs have been edited for

length or arrangement, and may not be exactly the

same as the original.

 About this manual

• The illustrations as shown in this manual are for

instructional purposes only, and may appear

somewhat different from those on your

instrument.

• Windows is a registered trademark of Microsoft®

Corporation in the United States and other

countries.

• iPhone, iPad and iPod touch are trademarks of

Apple Inc., registered in the U.S. and other

countries.

• The company names and product names in this

manual are the trademarks or registered

trademarks of their respective companies.

SC2 Owner’s Manual

Thank you for choosing the Yamaha Silent Piano™. This instrument is equipped with the same keyboard

mechanisms as an acoustic piano. However, you can play with the sound muted, and use various functions not

available on an acoustic piano, such as changing Voices or recording your performance. This manual mainly

explains these functions as a Silent Piano. In order to make the most of the performance potential and features

of the instrument, please read the manuals thoroughly, and keep them in a handy place for later reference.

About the Manuals

This instrument has the following documents and instructional materials.

 Included Documents

Owner’s Manual (this book)

This manual mainly describes how to use

the particular functions for the Silent

Piano™ which can be used when the power

is turned on. For information on handling

as an acoustic piano, refer to the separate

manual for the piano.

 Online Materials (downloadable

from the website)

iPhone/iPad Connection Manual

(only in English, French, German

and Spanish)

Explains how to connect the instrument to

smart devices, such as an iPhone, iPad, etc.

Computer-related Operations

Includes instructions on connecting this

instrument to a computer, and operations

related to transferring data.

MIDI Reference

Contains MIDI related information.

To obtain these manuals, access the Yamaha Downloads, enter the model name for searching the desired files.

Included Accessories

• Owner’s Manual (this book) x 1

•AC adaptor x 1

•Power cord x 1

•Headphones x 1

•Headphone hanger x 1

• Attachment screws for headphone hanger x 2

Quick Operation Guide (page 44)

This a quick reference for operation of

the functions assigned to the buttons

and keyboard.

Yamaha Downloads

https://download.yamaha.com/

SC2 Owner’s Manual

English

Features

• Silencing System enables you play in any situation, at any time you want

Yamaha’s innovative silencing system brings you superior performance, yet with virtually complete silence.

Enjoy your performance just as if you were playing an acoustic piano—but without the need to worry about

bothering people around you.

• Non-contact sensors for maximum expressiveness

The non-contact optical sensors faithfully detect subtle movement of the keys without affecting the touch of

the keys. They catch keystroke information precisely, enabling you to perform with rich nuance and

extraordinarily subtle expression.

• Elegant, integrated design

The control unit has been given a graceful design that unobtrusively blends with the piano itself. Moreover, the

simple controllers allow you to operate the instrument easily.

• Realistic ambience of the Voices enhances your performance

This instrument puts the sound of ten luxurious, authentic Voices at your fingertips. These include Yamaha’s

flagship CFX piano—which delivers dynamic sound, from a brilliant high-range to powerful bass—and the

Bösendorfer* Imperial, a world-class piano renowned for its subtle and warm sound. The instrument also

features advanced technologies such as Binaural Sampling. Listening with headphones to a piano Voice

enhanced through these methods gives the impression of being thoroughly immersed in the sound, as if it was

actually emanating from the piano.

Altogether, it delivers real sound faithful to that of an actual acoustic piano, such as the quick attack and the

graceful resonance of a sustained piano tone, as well as how the sound responds to your playing strength, and

the resonance effect when the damper pedal is pressed.

* Bösendorfer is a subsidiary company of Yamaha.

• Playback and recording functions for aid in learning and practice

You can record your performance to this instrument and a USB flash drive, and improve your performance by

listening back to the recording.

Smart Device App “Smart Pianist”

The smart device app “Smart Pianist” (available as a free download) enables you to use the functions such

as selecting Voices, controlling the metronome intuitively with the visualized interface, or display the score

on your smart device.

For information about this app, access the following web page:

https://www.yamaha.com/kbdapps/

The connection wizard of the Smart Pianist helps you to connect this unit to your smart device properly. To

start connection wizard, tap [ ] (Menu) located upper left on the Smart Pianist screen to open the menu,

then tap “Instrument” followed by “Start Connection Wizard.”

Chapter

SC2 Owner’s Manual

1 Getting Started

Part names

 Piano

Silencing lever (page 16)

Activates the Silent Piano™ function.

DC IN jack (page 14)

For connecting the supplied AC adaptor.

 Pedals

Damper pedal

Sustains notes even after you release the keys.

When the Silent Piano™ function is enabled and

a piano Voice is selected, pressing this pedal

reproduces the complicated interaction of both

strings and soundboard resonance by the VRM

technology (page 37), and makes the sound

more like a real acoustic piano.

The damper pedal features an expressive half-

pedal function, and allows you to set the degree

to which pressing the damper pedal applies the

half-pedal effect (page 35), when using the

Silent Piano™ function.

Upright Piano

Silencing pedal (For models not equipped

with a sostenuto pedal)

Activates the Silent Piano™ function by pressing

and sliding to the left.

Sostenuto pedal (For models equipped

with a sostenuto pedal)

Sustains the notes that are being played at the

time you press and hold the pedal, even after

you release the keys, letting you play additional

non-sustained notes. Subsequently played

notes are not affected.

Grand Piano

Sostenuto pedal / Bass sustain pedal

When using the Silent Piano function, there is

no Sostenuto effect.

Soft pedal

Reduces the volume and slightly changes the

timbre of the notes. The notes played before

this pedal is pressed are not affected.

Control unit

(page 13)

Control unit

(page 13)

Upright Piano Grand Piano

(for models

equipped with a

sostenuto pedal)

* May not be available

depending on the piano

type.

(on the rear of the piano)

3 2 1

NOTE

Either sostenuto or bass sustain function is installed

depending on your area.

English

SC2 Owner’s Manual

 Control unit

[PHONES] jacks (page 15)

For connecting a pair of headphones (stereo

mini plug). Up to two headphones can be

connected.

USB [TO DEVICE] terminal (page 25)

For connecting a USB flash drive or a USB

wireless LAN adaptor.

[] (Standby/On) switch (page 14)

For turning the power on or setting to standby.

[Rec] button (page 22)

For setting the unit to recording standby status.

The lamp indicates the recording status.

[ / ] (Play/Stop) button (page 23)

For alternately playing back and stopping the

preset Songs or your recorded performance.

The lamp indicates the playback status.

[Metronome] button (page 19)

For controlling the metronome. The lamp

indicates the metronome status.

[Func.] button (page 33)

For making settings of various functions.

[VOICE/VALUE] control

Rotating this allows you to select desired Voices

or adjust the setting values. Pressing this

control resets the Voice or setting values.

[VOLUME] control (page 16)

For adjusting the volume of the entire sound

output from the [PHONES] jack.

[DC IN 16V] jack (page 14)

For connecting to the power. The power cord

may already be connected to the DC IN jack on

the rear of the piano when the piano is shipped,

depending on the piano type.

[SENSOR] jack

(For qualified Yamaha personnel only.) This

connects to the sensor. The plug is already

connected when the instrument is shipped.

[AUX IN] jack (page 30)

For connecting an audio device such as a

portable music player by using an audio cable

with stereo mini plugs.

USB [TO HOST] terminal (page 31)

For connecting to a computer or a smart

device.

1 2

10 11 12

4 5

Front panel

Bottom panel

These buttons (and switch) are

pressed upward from the bottom.

SC2 Owner’s Manual

Turning the power on/off

WARNING

Use the specified adaptor (page 42) only. Use of other adaptors may result in irreparable damage to both the adaptor

and the instrument.

CAUTION

When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or

malfunction occurs, immediately turn the power off and disconnect the plug from the outlet.

NOTE

When disconnecting the AC adaptor, first turn the power off, and then follow the order shown above in reverse.

CAUTION

Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you

are not using the instrument for a long time or during electrical storms, make sure you unplug the AC power plug

from the wall AC outlet.

Connect the plugs of the AC adaptor in the order shown in the illustration.

Depending on the piano type, the DC IN jack is located at either of the following positions.

Make sure to loop the power cord through the hook attached to the rear of the piano or behind the

control unit.

1-2

1-1

1-3

1-4

1-2

1-4

1-1

1-3

DC IN jack

Hook is located on

the rear of the piano.

adaptor

Power cord

AC plug

AC outlet

The shape of the plug and outlet differ depending on your locale.

(Bottom of the control unit)

[DC IN 16V] jack

AC outlet

AC plug

Power cord

adaptor

The hook is behind the

control unit.

Press the [] (Standby/On) switch to turn

the power on.

The [ ] (Standby/On) lamp lights up.

To turn the power off, press the switch again.

NOTE

The sound will not be properly output if a key was pressed when the power was turned on. Do not touch any keys

when turning the power on.

English

SC2 Owner’s Manual

Using headphones

Connect a pair of headphones to the [PHONES] jack. Since this

instrument is equipped with two [PHONES] jacks, you can

connect two pairs of headphones. If you are using only one pair,

insert the plug into either of these jacks.

Even when listening through headphones, you can enjoy

exceptionally realistic, natural sound by Yamaha’s advanced

technologies, Binaural Sampling and Stereophonic Optimizer.

For details, refer to page 18.

CAUTION

• Do not use the headphones for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing loss.

• Be careful not to catch your foot on the headphone cord.

NOTICE

Do not pull the cord of the headphones or apply excessive force on the plug. This can damage the headphones and

result in sound degradation.

 Attaching the headphone hanger

Attach the headphone hanger to the bottom of the control

unit with the supplied two screws.

NOTICE

Do not hang anything other than the headphones on the

hanger. Otherwise, the instrument or the hanger may be

damaged.

Auto Power Off function

To prevent unnecessary power consumption, this unit features an Auto Power Off function that

automatically turns the power off if the instrument is not operated for 30 minutes.

NOTICE

When the instrument is communicating with other devices, the power will not be turned off automatically. Make

sure to turn off the power by pressing the [] (Standby/On) switch when the instrument is not in use.

Disabling Auto Power Off

Turn the power on while holding down the lowest key (A-1).

After a brief time, the [Rec] lamp flashes three times and the

unit starts up with the Auto Power Off function disabled.

To turn the Auto Power Off function on or off while the

power is on, refer to page 38.

Using an external speaker

The [PHONES] jack can also be used for external output. By connecting a powered speaker to the

[PHONES] jack, you can output the sound from this instrument to an external speaker and let other

people hear it.

NOTICE

To avoid possible damage to the devices, first turn on the power to the instrument, then to the external device.

When turning off the power, first turn off the power to the external device, then to the instrument.

Lowest key (A-1)

Phone plug

(stereo mini)

Phillips-head (+) screwdriver

Chapter

SC2 Owner’s Manual

2 Playing with the Silent Piano™

Function

This instrument can be played both as a normal acoustic piano, and also as a Silent Piano™. Enabling the Silent

Piano™ function lets you take advantage of a variety of powerful functions—such as playing preset Voices built

into unit and recording your performances. Try out the Silent Piano™ function and explore the possibilities.

Using the Silent Piano™ function

NOTE

The physical sound of the keyboard mechanism remains even when the Silent Piano™ function is active.

Plug the headphones into the [PHONES] jack (page 15).

Rotate the [VOLUME] control to the far-left

position to set the volume to minimum.

Press the [] (Standby/On) switch to turn the power on.

(For models equipped with a sostenuto pedal)

Pull the silencing lever towards you until

you hear a click and feel the mechanism

catch.

(For models not equipped with a sostenuto pedal)

Press the center pedal and slide it to the

left.

This prevents the hammers from actually striking

the strings.

While playing the keyboard, adjust the volume level by rotating the [VOLUME]

control.

Rotating to the right increases the volume, while rotating to the left decreases it.

English

SC2 Owner’s Manual

Selecting Voices

When the Silent Piano™ function is enabled, you can select and play the various built-in preset Voices from the

keyboard. By default, the CFX Grand is always selected when the power is turned on.

To select a Voice other than the CFX Grand:

Rotate the [VOICE/VALUE] control step by step to switch the

Voice to the next or previous one in the order of the Voice List

below.

To reset to the CFX Grand Voice:

Press the [VOICE/VALUE] control.

NOTE

• You can change various settings such as Reverb type and depth, Touch Sensitivity, tuning and brilliance (page 33).

• To hear and experience the characteristics of the Voices, listen to the Demo Songs for each Voice (page 26).

• Changing the Voice while pressing the keyboard may cause a sudden large change in the volume.

 Voice List

Voice Name Description

Stereo

Sampling

Touch

Sensi-

tivity

Key-off

Sampling

VRM

Piano

1Binaural

CFX Grand

Yamaha’s CFX concert grand piano sound

sampled by Binaural Sampling, the method

optimized for headphone use. Listening this

through headphones gives the impression of being

immersed in the sound, as if it was actually

emanating from the piano. This is available when

the Binaural setting is turned on (page 37).



CFX Grand Yamaha’s CFX concert grand piano sound with a

wide dynamic range for maximum expressive

control. Suitable for playing in any music genre

and style. This is available when the Binaural

setting is turned off (page 37).



2 Bösendorfer

Imperial

The famed sound of the Vienna-made Bösendorfer

Imperial concert grand piano. Its spacious sound

evokes the size of the instrument, and is ideal for

expressing tenderness in compositions.



3 Upright Piano The sound sampled from an upright piano, the

Yamaha SU7. Enjoy the unique tonal character and

a lighter, more casual feel.

-- 

E. Piano

4 Stage E.Piano The sound of an electric piano using hammer-

struck metallic “tines.” A soft tone results when

played lightly, and an aggressive tone when

played hard.

-- --

5 DX E.Piano An electronic piano sound produced by an FM

synthesizer. The tone will change as you vary your

playing touch. Ideal for popular music.

--  -- --

6 Vintage E.Piano A different type of electric piano sound than Stage

E. Piano. Widely used in rock and popular music.

-- --

SC2 Owner’s Manual

The cells marked by “” indicate the available characteristics (which are explained below) for the Voice.

• Stereo Sampling: Stereo sampling is used for the Voice.

• Touch Sensitivity: The volume responds to your playing strength.

• Key-off Sampling: The key-off sound (the subtle sound that occurs when you release a key) is sampled for

the Voice.

• VRM: Simulated string resonance sound with physical modeling when the damper pedal is pressed or keys

are pressed. This can be turned on or off. For details, refer to page 37.

 Reproducing a natural sound distance sensation (even when using

headphones)—Binaural Sampling and Stereophonic Optimizer

This instrument features two advanced technologies that allow you to enjoy exceptionally realistic, natural

sound, even though listening on headphones. These functions can be turned on or off as desired (page 37).

Binaural Sampling (CFX Grand Voice only)

Binaural Sampling is a method that uses two special microphones set at the ear position of a performer and

records the sound from a piano as it would actually be heard. Listening to the sound with this effect through

headphones gives the impression of being immersed in the sound, as if it was actually emanating from the

piano. When the CFX Grand Voice is selected, binaural sampled sound is produced.

Stereophonic Optimizer (Piano Voices other than CFX Grand)

Stereophonic Optimizer is an effect which reproduces the natural sound distance, like with the sound of

Binaural Sampling, even though you are listening to it on headphones. When one of the Piano Voices other

than CFX Grand is selected, the Stereophonic Optimizer is enabled.

Harpsichord

7 Harpsichord 8' The sound of an instrument frequently used in

baroque music. Variations in playing touch will not

affect the volume, and a characteristic sound will

be heard when you release the key.

 --  --

8 Celesta The sound of a celesta (a percussion instrument in

which hammers strike tuned metal bars). This

instrument is well-known for its appearance in

“Dance of the Sugarplum Fairies” from

Tchaikovsky’s “Nutcracker Suite.”

-- --

Organ

9 Organ Principal This Voice features the combination of pipes

(8'+4'+2') of the principal setting (brass emulation)

on a pipe organ. It is suitable for Baroque church

music.

 -- -- --

Jazz Organ The sound of a “tonewheel” type electric organ.

Sampled with a Rotary SP effect, its rotation speed

is slow. Often heard in jazz and rock idioms.

-- -- -- --

Voice Name Description

Stereo

Sampling

Touch

Sensi-

tivity

Key-off

Sampling

VRM

English

SC2 Owner’s Manual

Using the metronome

The unit features a built-in metronome that helps you to practice and play with accurate tempo.

NOTE

When a MIDI Song (page 23) is played back, the metronome plays according to the Song tempo and time signature.

 Selecting the time signature (Beat)

While holding down the [Metronome] button, press one of the C3 – F3 keys, to select the number of beats in a

measure. For values other than 0, the first beat is accented with a bell sound to signal the start of a measure.

Default setting: 0 (no 1st beat accent)

NOTE

• One beat is equal to a quarter note on this unit. When playing a song written in non- quarter-note units, change the setting

accordingly (for example, when playing a song in 3/2 time, set Beat to 6).

• The metronome beat is automatically reset to the default value when the power is turned off.

 Voice confirmation of current tempo value (in English)

While holding down the [Metronome] button, press the lowest key (A-1).

Press the [Metronome] button to start the metronome.

While the metronome sounds, the [Metronome] lamp flashes in orange at the current tempo.

Press the [Metronome] button again to stop the metronome.

Flashes

Highest key (C7)

C#3: 2 D#3: 4

C3: 0

D3: 3 E3: 5

F3: 6

Lowest key (A-1)

SC2 Owner’s Manual

 Adjusting the tempo

The metronome tempo can be set from 5 to 500 beats per minute by one of the following methods.

NOTE

The metronome tempo restores to its default setting when the power is turned off.

• To adjust by rotating the [VOICE/VALUE] control:

While holding down the [Metronome] button, rotate the [VOICE/VALUE] control.

• To specify a three-digit value:

While holding down the [Metronome] button, press the relevant C0 – A0 keys one by one in order. For

example to specify “95,” press the A0 (0), G#0 (9) and E0 (5) keys in order. A numeric value is read out in

English when a relevant key is pressed.

• To increase or decrease the value by 1 or 10:

While holding down the [Metronome] button, press one of the keys shown below.

• To reset the value to the default:

While holding down the [Metronome] button, press the C1 key.

NOTE

When the Audio Song is being played back, this operation changes the playback speed (page 29). The metronome

tempo does not change.

Lowest key (A-1)

C0: 1 A0: 0

G#0: 9

Lowest key (A-1)

D1: +10

C#1: +1A#0: -10

B0: -1

Lowest key (A-1)

C1: Default

La pagina sta caricando ...

Yamaha SC2 Manuale del proprietario

Marca: Yamaha

Modello: SC2

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Yamaha SC2 Owner's manual
français: Yamaha SC2 Le manuel du propriétaire
español: Yamaha SC2 El manual del propietario
Deutsch: Yamaha SC2 Bedienungsanleitung
русский: Yamaha SC2 Инструкция по применению
Nederlands: Yamaha SC2 de handleiding
português: Yamaha SC2 Manual do proprietário
dansk: Yamaha SC2 Brugervejledning
čeština: Yamaha SC2 Návod k obsluze
polski: Yamaha SC2 Instrukcja obsługi
svenska: Yamaha SC2 Bruksanvisning
Türkçe: Yamaha SC2 El kitabı
suomi: Yamaha SC2 Omistajan opas
română: Yamaha SC2 Manualul proprietarului

Yamaha SC2 Manuale del proprietario

Yamaha SC2 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti