Sony CDX-H905IP Manuale utente

Marca: Sony

Modello: CDX-H905IP

Categoria: Ricevitori multimediali per auto

Tipo: Manuale utente

Questo manuale è adatto anche per

CDX-HR905IP

Operating Instructions

Mode d’emploi

Manual de instrucciones

Bedienungsanleitung

Gebruiksaanwijzing

Istruzioni per l’uso

2007 Sony Corporation

3-281-333-12 (1)

To cancel the demonstration (DEMO) display, see page 16.

Pour annuler la démonstration (DEMO), reportez-vous à la page 14.

Para cancelar la pantalla de demostración (DEMO), consulte la página 15.

Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 15 nach.

Om de demonstratie (DEMO) te annuleren, zie pagina 15.

Per annullare la dimostrazione (DEMO), vedere pagina 15.

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record these numbers in the spaces provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No.

Serial No.

FM/AM

Compact Disc Player

CDX-H905IP

FM/MW/LW

Compact Disc Player

CDX-HR905IP

Warning

CDX-H905IP only

For installation and connections, see the

supplied installation/connections manual.

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

–

Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment

and receiver.

–

Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

–

Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

The use of optical instruments with this produc

will increase e

e hazard.

CAUTION

For the state of california, USA only

Perchlorate Material – special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Perchlorate Material: Lithium battery contains

perchlorate

This label is located on the bottom of the

chassis.

Notice for the customer in the countries

applying EU Directives

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan, Minato-ku, Tokyo,

Japan.

The Authorized Representative for EMC and

product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Applicable accessory: Remote commander

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the packaging indicates that

the battery provided with this product shall not be treated as

household waste. By ensuring these batteries are disposed of

correctly, you will help prevent potentially negative

consequences for the environment and human health which

could otherwise be caused by inappropriate waste handling of

the battery. The recycling of the materials will help to conserve

natural resources.

In case of products that for safety, performance or data integrity

reasons require a permanent connection with an incorporated

battery, this battery should be replaced by qualified service

staff only. To ensure that the battery will be treated properly,

hand over the product at end-of-life to the applicable collection

point for the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to

remove the battery from the product safely. Hand the battery

over to the applicable collection point for the recycling of

waste batteries.

For more detailed information about recycling of this product

or battery, please contact your local Civic Office, your

household waste disposal service or the shop where you

purchased the product.

SonicStage and its logo are trademarks of Sony

Corporation.

“ATRAC” and its logo are trademarks of Sony

Corporation.

iPod is a trademark of Apple Inc., registered in

the U.S. and other countries.

CDX-H905IP only

Warning if your boat’s ignition has no

ACC position

Be sure to set the Auto Off function (page 16).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain.

If you do not set the Auto Off function, press

and hold (OFF) until the display disappears

each time you turn the ignition off.

Microsoft, Windows Media,

and the Windows logo are

trademarks or registered

trademarks of Microsoft

Corporation in the United States and/or other

countries.

The “HD Radio Ready” logo indicates that this

product will control a Sony HD Radio

tuner

(sold separately).

For HD Radio

tuner operation, please refer to

the HD Radio

tuner owner’s manual.

The HD Radio Ready logo is a registered

trademark of iBiquity.

HD Radio

is a trademark of iBiquity Digital

Corp.

The “SAT Radio Ready”

logo indicates that this

product will control a

satellite radio tuner module

(sold separately). Please see your nearest

authorized Sony dealer for details on the

satellite radio tuner module.

“SAT Radio,” “SAT Radio Ready,” the SAT

Radio and SAT Radio Ready logos and all

related marks are trademarks of Sirius Satellite

Radio Inc. and XM Satellite Radio Inc.

Table of Contents

Welcome ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 7

Preparing the card remote commander . . . . . . . 7

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 7

Inserting the disc in the unit . . . . . . . . . . . . . . . 7

Ejecting the disc . . . . . . . . . . . . . . . . . . . . . . 7

Location of controls and basic

operations

Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Card remote commander RM-X151 . . . . . . 10

Display items . . . . . . . . . . . . . . . . . . . . . . . 11

Repeat and shuffle play. . . . . . . . . . . . . . . . 11

Radio

Storing and receiving stations . . . . . . . . . . . . . 11

Storing automatically — BTM . . . . . . . . . . 11

Storing manually. . . . . . . . . . . . . . . . . . . . . 11

Receiving the stored stations . . . . . . . . . . . 11

Tuning automatically . . . . . . . . . . . . . . . . . 12

RDS (CDX-HR905IP). . . . . . . . . . . . . . . . . . . 12

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Setting AF and TA . . . . . . . . . . . . . . . . . . . 12

Selecting PTY. . . . . . . . . . . . . . . . . . . . . . . 13

Setting CT. . . . . . . . . . . . . . . . . . . . . . . . . . 13

iPod

Playing back iPod . . . . . . . . . . . . . . . . . . . . . . 14

Playing tracks. . . . . . . . . . . . . . . . . . . . . . . 14

Display items . . . . . . . . . . . . . . . . . . . . . . . 14

Setting the play mode . . . . . . . . . . . . . . . . . . . 14

Selecting Album, Artist or Playlist . . . . . . 14

Repeat and shuffle Play . . . . . . . . . . . . . . . 15

Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Other functions

Changing the sound settings . . . . . . . . . . . . . . 15

Adjusting the sound characteristics

— BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . 15

Customizing the equalizer curve

— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting setup items — SET . . . . . . . . . . . . 16

Using optional equipment. . . . . . . . . . . . . . . . 17

CD/MD changer. . . . . . . . . . . . . . . . . . . . . 17

Marine remote commander

RM-X55M/X11M . . . . . . . . . . . . . . . . . . . 17

Auxiliary audio equipment. . . . . . . . . . . . . 18

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 18

Playback order of MP3/WMA/

AAC files . . . . . . . . . . . . . . . . . . . . . . . . . . 19

About MP3 files . . . . . . . . . . . . . . . . . . . . . 19

About WMA files. . . . . . . . . . . . . . . . . . . . 19

About AAC files . . . . . . . . . . . . . . . . . . . . 20

About ATRAC CD. . . . . . . . . . . . . . . . . . . 20

About iPod . . . . . . . . . . . . . . . . . . . . . . . . . 20

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 21

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 22

Error displays/Messages. . . . . . . . . . . . . . . 24

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy your boating with the

following functions.

• CD playback

You can play CD-DA (also containing CD

TEXT), CD-R/CD-RW (MP3/WMA/AAC files

(

page 19)) and ATRAC CD (ATRAC3 and

ATRAC3plus format (page 20)).

• Radio reception

– You can store up to 6 stations per band.

CDX-H905IP:

FM1, FM2, FM3, AM1 and AM2

CDX-HR905IP:

FM1, FM2, FM3, MW and LW

– BTM (Best Tuning Memory): The unit selects

strong signal stations and stores them.

• RDS services

– You can listen to FM stations with the Radio

Data System (RDS) in Europe.

(CDX-HR905IP)

• Sound adjustment

– EQ3 stage2: You can choose any one of 7

preset equalizer curves.

– DSO (Dynamic Soundstage Organizer):

Creates a more ambient sound field, using

virtual speaker synthesis, to enhance the

sound of speakers, even if they are installed

low in the door.

• Optional device operation

Various kinds of audio devices can be

connected.

– iPod: iPod connection can be made by the

dock connector cable on the rear of the unit.

– Portable audio device: An AUX IN jack

on the rear of the unit allows connection of a

portable audio device (analog connection).

– CD/MD changers: CD/MD changers can be

connected to the Sony BUS at the rear of the

unit.

About water resistancy

This unit is designed for use in a marine

environment. To protect the unit from water spray,

waves, rain, moisture, ultraviolet rays, etc., the unit

has undergone the following tests to ensure

reliability and functionality (Front panel only):

• Water resistant front panel - IPx5 certified

• Salt fog resistant - Tested under ASTM B117

• Conformal coated circuit board

• UV resistant - Tested under ASTM G154

Notes

• Be sure to close the front panel to maintain water

resistant performance, except when inserting/

ejecting a disc.

• Do not allow water to contact the unit except the

front panel.

• Do not use this unit in the following places:

– places where the unit may be subject to high water

pressure, hot springs or bathtubs, etc.

– underwater.

Type of discs Label on the disc

CD-DA

MP3

WMA

AAC

ATRAC CD

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the boat’s battery or changing the

connections, you must reset the unit.

Open the front panel and press the RESET button

with a pointed object, such as a ball-point pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Preparing the card remote

commander

Before using the card remote commander for the

first time, remove the insulation film.

Tip

For how to replace the battery, see “Replacing the

lithium battery of the card remote commander” on

page 20.

Setting the clock

CDX-H905IP:

12-hour indication

CDX-HR905IP:

24-hour indication

1 Press and hold (SELECT).

The setup display appears.

2 Press (SELECT) repeatedly until

“CLOCK-ADJ” appears.

3 Press (SEEK) +.

The hour indication flashes.

4 Rotate the volume control dial to set

the hour and minute.

To move the digital indication, press (DSPL).

5 Press (SELECT).

The setup is complete and the clock starts.

To display the clock, press (DSPL). Press

(DSPL) again to return to the previous display.

Tip

You can set the clock automatically with the RDS

feature (

page 13). (CDX-HR905IP only)

Inserting the disc in the unit

1 Slide the OPEN switch in the direction

of the arrow.

2 Open the front panel.

3 Insert the disc (label side up).

4 Close the front panel.

Playback starts automatically.

Notes

• Do not put anything on the inner surface of the front

panel.

• Be sure to close the front panel during operation.

Ejecting the disc

1 Slide the OPEN switch and open the

front panel.

2 Press Z.

The disc is ejected.

3 Close the front panel.

RESET

button

Location of controls and basic operations

Main unit

Front panel opened

OFF

DSPL

MODE

GP/ALBM

REP SHUF

PAUSE

SOURCE

RESET

This section contains instructions on the location

of controls and basic operations. For details, see

the respective pages.

For iPod operation, see “iPod” on page 14, or for

optional device (CD/MD changer, etc.,)

operation, see “Using optional equipment” on

page 17.

The corresponding buttons on the card remote

commander control the same functions as those

on the unit.

A DSO button page 6

To select the DSO mode (1, 2, 3 or OFF).

The larger the number, the more enhanced

the effect.

B OFF button

To power off; stop the source.

C SCRL (scroll) button (CDX-H905IP)

To scroll the display item.

AF (Alternative Frequencies)/TA

(Traffic Announcement) button (CDX-

HR905IP)

page 12

To set AF and TA in RDS.

D Volume control dial page 15

To adjust volume.

E Number buttons

CD/PD:

(1)/(2): GP/ALBM –/+

To skip albums (press); skip albums

continuously (press and hold).

(3): REP page 11

(4): SHUF page 11

(6): PAUSE

To pause playback of a CD on this unit.

To cancel, press again.

Radio:

To receive stored stations (press); store

stations (press and hold).

F OPEN switch page 7

G Display window

H DSPL (display) button page 11, 12

To change display items.

I EQ3 (equalizer) button page 15

To select an equalizer type (XPLOD,

VOCAL, EDGE, CRUISE, SPACE,

GRAVITY, CUSTOM or OFF).

J Receptor for the card remote

commander

K BTM/CAT button (CDX-H905IP)

page 11

To start the BTM function (press and hold).

PTY (Program Type) button (CDX-

HR905IP)

page 13

To select PTY in RDS.

L SEEK –/+ buttons

CD/PD:

To skip tracks (press); skip tracks

continuously (press, then press again within

about 1 second and hold); reverse/fast-

forward a track (press and hold).

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

M SELECT button

To select setup items.

N SOURCE button

To power on; change the source (Radio/CD/

AUX/PD)*.

O Frequency select switch (CDX-

H905IP) (located on the bottom of the unit)

See “Frequency select switch” in the

supplied installation/connections manual.

P MODE button page 11

To select the radio band*; select the play

mode of iPod.

Q RESET button page 7

R Disc slot page 7

To insert the disc.

S Z (eject) button page 7

To eject the disc.

continue to next page t

Card remote commander

RM-X151

The following buttons on the card remote

commander have also different buttons/functions

from the unit. Remove the insulation film before

use (

page 7).

w; < (.)/, (>) buttons

To control CD/radio/PD, the same as

(SEEK) –/+ on the unit.

Setup, sound setting, etc., can be operated by

< ,.

wa VOL (volume) +/– button

To adjust volume.

ws ATT (attenuate) button

To attenuate the sound. To cancel, press

again.

wd M (+)/m (–) buttons

To control CD/PD, the same as (GP/ALBM)

–/+ on the unit.

Setup, sound setting, etc., can be operated by

M m.

wf SCRL (scroll) button

To scroll the display item.

wg Number buttons

To receive stored stations (press); store

stations (press and hold).

* In the case of a CD/MD changer, HD radio tuner or

SAT tuner being connected; when (SOURCE) is

pressed, the connected device (“MD,” “HD,” “XM” or

“SR”) will appear in the display, depending on which

device is connected. Furthermore, if (MODE) is

pressed, you can switch the changer, HD radio tuner

band or SAT tuner band.

(A HD radio tuner or SAT tuner can only be

connected to the CDX-H905IP.)

Note

If the unit is turned off and the display disappears, it

cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is

inserted to activate the unit first.

For details on selecting a CD/MD changer, see

page 17.

Display items

A Source

B Track number/Elapsed playing time, Disc/

artist name, Album/group number*, Album/

group name, Track name, Text information,

Clock

C ATRAC/WMA/MP3/AAC indication

* Album/group number is displayed only when the

album/group is changed.

To change display items B, press (DSPL).

Tip

Displayed items will differ, depending on the disc type,

recorded format and settings. For details on MP3/

WMA/AAC, see

page 19; ATRAC CD, see page 20.

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

*1 When an MP3/WMA/AAC is played.

*2 When an ATRAC CD is played.

To return to normal play mode, select “ OFF”

or “SHUF OFF.”

Radio

Storing and receiving stations

Caution

When tuning in stations while boating, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly.

2 Press and hold (SEL ECT) .

The setup display appears.

3 Press (SELEC T) repeatedly until

“BTM” appears.

4 Press (SEEK ) +.

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

Storing by the BTM button

(CDX-H905IP only)

Press and hold (BTM) until “BTM” flashes,

instead of steps 2 to 4.

Storing manually

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be replaced.

Tip

When a RDS station is stored, the AF/TA setting is

also stored (

page 12). (CDX-HR905IP only)

Receiving the stored stations

1 Select the band, then press a number

button ((1) to (6)).

Select To play

TRACK track repeatedly.

ALBUM*

album repeatedly.

GROUP*

group repeatedly.

SHUF ALBUM*

album in random order.

SHUF GROUP*

group in random order.

SHUF DISC disc in random order.

Tuning automatically

1 Select the band, then press (SEEK) –/+

to search for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK)

–/+ to locate the

approximate frequency, then press (SEEK)

–/+

repeatedly to fine adjust to the desired frequency

(manual tuning).

RDS (CDX-HR905IP)

Overview

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio program signal.

Display items

A Radio band, Function

B TA/TP*

C Frequency*

(Program service name), Preset

number, Clock, RDS data

*1 “TA” flashes during traffic information. “TP” lights

up while such a station is received.

*2 While receiving the RDS station, “ *” is displayed

on the left of the frequency indication.

To change display items C, press (DSPL).

RDS services

This unit automatically provides RDS services as

follows:

Notes

• Depending on the country/region, not all RDS

functions may be available.

• RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting

RDS data.

Setting AF and TA

1 Press (AF/TA) repeatedly until the

desired setting appears.

Storing RDS stations with the AF and

TA setting

You can preset RDS stations along with the AF/

TA setting. If you use the BTM function, only

RDS stations are stored with the same AF/TA

setting.

If you preset manually, you can preset both RDS

and non-RDS stations with the AF/TA setting for

each.

1 Set AF/TA, then store the station with BTM or

manually.

Receiving emergency

announcements

With AF or TA on, the emergency

announcements will automatically interrupt the

currently selected source.

Tip

If you adjust the volume level during a traffic

announcement, that level will be stored into memory

for subsequent traffic announcements, independently

from the regular volume level.

AF (Alternative Frequencies)

Selects and retunes the station with the

strongest signal in a network. By using this

function, you can continuously listen to the

same program during long-distance voyage

without having to retune the same station

manually.

TA (Traffic Announcement)/TP (Traffic

Program)

Provides current traffic information/programs.

Any information/program received, will

interrupt the currently selected source.

PTY (Program Types)

Displays the currently received program type.

Also searches your selected program type.

CT (Clock Time)

The CT data from the RDS transmission sets

the clock.

Select To

AF-ON activate AF and deactivate TA.

TA-ON activate TA and deactivate AF.

AF, TA-ON activate both AF and TA.

AF, TA-OFF deactivate both AF and TA.

Staying with one regional program

— REG

When the AF function is on: this unit’s factory

setting restricts reception to a specific region, so

you will not be switched to another regional

station with a stronger frequency.

If you leave this regional program’s reception

area, set “REG-OFF” in setup during FM

reception (

page 16).

Note

This function does not work in the UK and in some

other areas.

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 During FM reception, press a number button

((1) to (6)) on which a local station is stored.

2 Within 5 seconds, press again a number button

of the local station.

Repeat this procedure until the local station is

received.

Selecting PTY

1 Press (PTY) during FM reception.

The current program type name appears if the

station is transmitting PTY data.

2 Press (PTY) repeatedly until the

desired program type appears.

3 Press (SEEK) –/+.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

Note

You cannot use this function in countries/regions

where no PTY data is available.

Setting CT

1 Set “CT-ON” in setup (page 16).

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

NEWS (News), AFFAIRS (Current Affairs),

INFO (Information), SPORT (Sports),

EDUCATE (Education), DRAMA (Drama),

CULTURE (Culture), SCIENCE (Science),

VARIED (Varied), POP

M (Popular Music),

ROCK

M (Rock Music), EASY M (Easy

Listening), LIGHT

M (Light Classical),

CLASSICS (Classical), OTHER

M (Other

Music Type), WEATHER (Weather),

FINANCE (Finance), CHILDREN (Children’s

Programs), SOCIAL

A (Social Affairs),

RELIGION (Religion), PHONE

IN (Phone In),

TRAVEL (Travel), LEISURE (Leisure), JAZZ

(Jazz Music), COUNTRY (Country Music),

NATION

M (National Music), OLDIES (Oldies

Music), FOLK

M (Folk Music), DOCUMENT

(Documentary)

iPod

Playing back iPod

By connecting an iPod to the dock connector at

the rear of the unit, you can listen on your boat’s

speakers, while controlling the iPod from the

unit.

Notes

• When an iPod is connected to the dock connector,

operation from the iPod cannot be performed.

• Before connecting the iPod to the dock connector,

turn down the volume of the unit.

• When not using the dock connector, use the

supplied dock connector cap to prevent water

entering.

Playing tracks

1 Connect the iPod to the dock

connector.

The iPod will turn on automatically, and the

display will appear on the iPod screen as

below.

2 Press (SOURCE) repeatedly until “PD”

appears.

“PD 1 PORTABLE” appears, and the tracks

on the iPod start playing automatically from

the point last played.

3 Press (MODE) to select the play mode.

The mode changes as follows:

RESUMING t ALBUM t ARTIST t

PLAYLIST

4 Adjust the volume.

Press (OFF) to stop playback.

Tips

• When the iPod is connected to the dock connector,

the mode changes to the Resuming mode. In

Resuming mode, pressing (3)

(Repeat),

(4)

(Shuffle) or (5) (Scan) does not function. If you

cancel Resuming mode by pressing (MODE) or

(1)/(2) (GP/ALBM –/+), (3) (Repeat), (4) (Shuffle)

or (5)

(Scan) now function to change the play

mode.

• When the ignition key is turned to the ACC position,

or the unit is on, the iPod will be recharged.

• If the iPod is disconnected during playback,

playback will pause.

Note

An another iPod cannot be connected using the XA-

110IP or XA-120IP.

Display items

To change display items, press (DSPL).

Note

Some letters stored in iPod may not be displayed

correctly.

Setting the play mode

Selecting Album, Artist or Playlist

1 During playback, press (MODE).

The mode changes as follows:

ALBUM t ARTIST t PLAYLIST

Skipping albums, artists and

playlists

To Press

Skip (1)/(2) (GP/ALBM –/+)

[press once for each]

Skip

continuously

(1)/(2) (GP/ALBM –/+)

[hold to desired point]

Track/album/artist name, Track number,

Elapsed playing time, Clock

Repeat and shuffle Play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

To return to normal play mode, select “REP

OFF” or “SHUF OFF.”

Note

(1)/(2) (GP/ALBM –/+) will not work during shuffle

play.

Scan

You can quickly locate a specific point on the

iPod.

1 During playback, press (5) until

“SCAN ON” appears.

The first 10 seconds of each track will be

played.

To return to normal play mode, select “SCAN

OFF.”

Note

This function will not work during shuffle play.

Other functions

Changing the sound settings

Adjusting the sound

characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer

volume.

1 Press (SELEC T) repeatedly until

“BAL,” “FAD” or “SUB” appears.

The item changes as follows:

LOW*

t MID*

t HI*

BAL (left-right) t FAD (front-rear) t

SUB (subwoofer volume)*

t AUX*

*1 When EQ3 is activated (page 15).

*2 When the audio output is set to “SUB”

(page 16).

“ATT” is displayed at the lowest setting, and can

be adjusted up to 21 steps.

*3 When AUX source is activated (page 18).

2 Rotate the volume control dial to

adjust the selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your

own equalizer settings.

1 Select a source, then press (EQ3)

repeatedly to select “CUSTOM.”

2 Press (SELEC T) repeatedly until

“LOW,” “MID” or “HI” appears.

3 Rotate the volume control dial to

adjust the selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold (SELECT) before the setting

is complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Select To play

REP TRK track repeatedly.

REP ALB album repeatedly.

REP ART artist repeatedly.

REP PLY playlist repeatedly.

SHUF ALB album in random order.

SHUF ART artist in random order.

SHUF PLY playlist in random order.

SHUF ALL all tracks in random order.

continue to next page t

Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1 Press and hold (SELECT).

The setup display appears.

2 Press (S ELECT) repeatedly until the

desired item appears.

3 Rotate the volume control dial to

select the setting (example “ON” or

“OFF”).

4 Press and hold (SELECT).

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

The following items can be set (follow the page

reference for details):

“z” indicates the default settings.

CLOCK-ADJ (Clock Adjust) (page 7)

CT*

(Clock Time)

To set “CT-ON” or “CT-OFF” (

z) (page 12, 13).

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

AUX-A*

(AUX Audio)

To turn the AUX source display “AUX-A-ON”

(

z) or “AUX-A-OFF” (page 18).

A.OFF (Auto Off)

To shut off automatically after a desired time

when the unit is turned off: “A.OFF-NO” (

z),

“A.OFF-30S (Seconds),” “A.OFF-30M

(Minutes)” or “A.OFF-60M (Minutes).”

REAR/SUB*

To switch the audio output.

–“REAR-OUT” (

z): to output to a power

amplifier.

– “SUB-OUT”: to output to a subwoofer.

DEMO

(Demonstration)

To set “DEMO-ON” (z) or “DEMO-OFF.”

DIM (Dimmer)

To change the brightness of the display.

–“DIM-AT” (

z): to dim the display

automatically when you turn lights on.

– “DIM-OFF”: to deactivate the dimmer.

– “DIM-ON”: to dim the display.

CONTRAST

To adjust the contrast of the display.

The contrast level is adjustable in 7 steps.

ILM (Illumination)

To change the illumination color: “ILM-1” (

or “ILM-2.”

M.DSPL (Motion Display)

To select the Motion Display mode.

– “M.DSPL-LM” (

z): to show moving patterns

and level meter.

– “M.DSPL-OFF”: to deactivate the Motion

Display.

– “M.DSPL-ON”: to show moving patterns.

A.SCRL (Auto Scroll)

To scroll long displayed item automatically

when the disc/album/group/track is changed.

– “A.SCRL-ON” (

z): to scroll.

– “A.SCRL-OFF”: to not scroll.

LOCAL (Local seek mode)

–“LOCAL-OFF” (

z): to tune normal reception.

– “LOCAL-ON” : to only tune into stations with

stronger signals.

MONO*

(Monaural mode)

To improve poor FM reception, select monaural

reception mode.

– “MONO-OFF” (

z): to hear stereo broadcast in

stereo.

– “MONO-ON”: to hear stereo broadcast in

monaural.

REG*

(Regional)

To set “REG-ON” (

z) or “REG-OFF” (page 13).

LPF*

(Low Pass Filter)

To select the subwoofer cut-off frequency: “LPF

OFF” (

z), “LPF125Hz” or “LPF 78Hz.”

LOUD (Loudness)

To allow you to listen clearly at low volume

levels.

– “LOUD-ON” : to reinforce bass and treble.

– “LOUD-OFF” (

z): to not reinforce bass and

treble.

BTM (page 11)

*1 CDX-HR905IP only.

*2 When the unit is turned off.

*3 When FM is received.

*4 When the audio output is set to “SUB.”

Using optional equipment

CD/MD changer

Selecting the changer

1 Press (SOURCE) repeatedly until “CD” or

“MD” appears.

2 Press (MODE) repeatedly until the desired

changer appears.

Playback starts.

Skipping albums and discs

1 During playback, press (1)/(2) (GP/ALBM

–/+).

Repeat and shuffle play

1 During playback, press (3) (REP) or (4)

(SHUF) repeatedly until the desired setting

appears.

* When one or more CD changers, or two or more MD

changers are connected.

To return to normal play mode, select “ OFF”

or “SHUF OFF.”

Tip

“SHUF ALL” will not shuffle tracks between CD units

and MD changers.

Marine remote commander

RM-X55M/X11M

Location of controls

The corresponding buttons on the marine remote

commander control the same functions as those

on this unit.

RM-X55M

RM-X11M

The following controls on the marine remote

commander require a different operation from

the unit.

• VOLUME (VOL) +/– button(s)

The same as the volume control dial on the

unit.

• MUTING button

To attenuate the sound. (The same as (ATT) on

the card remote commander.)

To skip

Press (1)/(2) (GP/ALBM

–/+)

album and release (hold for a

moment).

album

continuously

within 2 seconds of first

releasing.

discs repeatedly.

discs

continuously

then, press again within 2

seconds and hold.

Select To play

DISC disc repeatedly.

SHUF

CHANGER

tracks in the changer in random

order.

SHUF ALL* tracks in all units in random

order.

Unit number

Disc number

MODE

VOLUME

+/–

SOURCE

MUTING

(ATT)

OFF

GP/ALBM

–/+

SEEK –/+

MODE

VOL +/–

OFF

GP/ALBM

–/+

SEEK –/+

SOURCE

Auxiliary audio equipment

By connecting an optional portable audio device

to the AUX IN jack on the unit and then simply

selecting the source, you can listen on your boat

speakers. The volume level is adjustable for any

difference between the unit and the portable

audio device. Follow the procedure below:

Adjust the volume level

Be sure to adjust the volume for each connected

audio device before playback.

1 Turn down the volume on the unit.

2 Press (SOURCE) repeatedly until “AUX”

appears.

“AUX REAR IN” appears.

3 Start playback of the portable audio device at a

moderate volume.

4 Set your usual listening volume on the unit.

5 Press (SELECT) repeatedly until “AUX”

appears, and rotate the volume control dial to

adjust the input level (–8 dB to +18 dB).

Additional Information

Precautions

• If your boat has been moored in direct sunlight,

allow the unit to cool off before operating it.

• Power antenna (aerial) will extend automatically

while the unit is operating.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit will

not operate properly. In such a case, remove the disc

and wait for about an hour until the moisture has

evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Notes on discs

• To keep a disc clean, do not touch its surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc magazines

when not in use.

• Do not subject discs to heat/high temperature.

Avoid leaving them in a moored boat.

• Do not attach labels, or use discs with sticky ink/

residue. Such discs may stop spinning when used,

causing a malfunction, or may ruin the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from using

such discs:

– Inability to eject a disc (due to a label or sticker

peeling off and jamming the eject mechanism).

– Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to heat

shrinking of a sticker or label causing a disc to

warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do not

use such discs.

• You cannot play 8 cm (3

/4 in) CDs.

• Before playing, clean the discs

with a commercially available

cleaning cloth. Wipe each disc

from the center out. Do not use

solvents such as benzine,

thinner, commercially available

cleaners, or antistatic spray

intended for analog discs.

Notes on CD-R/CD-RW discs

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the condition

of the disc) may not play on this unit.

• You cannot play a CD-R/a CD-RW that is not

finalized.

• The unit is compatible with the ISO 9660 level 1/

level 2 format, Joliet/Romeo in the expansion

format, and Multi Session.

• The maximum number of:

– folders (albums): 150 (including root and empty

folders).

– files (tracks) and folders contained in a disc: 300

(if a folder/file names contain many characters,

this number may become less than 300).

– displayable characters for a folder/file name is

32 (Joliet), or 64 (Romeo).

• When the disc is recorded in Multi Session, only

the first track of the first session format is

recognized and played (any other format is

skipped). The priority of the format is CD-DA,

ATRAC CD and MP3/WMA/AAC.

– When the first track is a CD-DA, only CD-DA of

the first session is played.

– When the first track is not a CD-DA, an ATRAC

CD or MP3/WMA/AAC session is played. If the

disc has no data in any of these formats, “NO

MUSIC” is displayed.

Music discs encoded with copyright

protection technologies

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

some record companies. Please be aware that among

those discs, there are some that do not conform to

the CD standard and may not be playable by this

product.

Playback order of MP3/WMA/AAC

files

About MP3 files

• MP3, which stands for MPEG-1 Audio Layer-3, is

a music file compression format standard. It

compresses audio CD data to approximately 1/10

of its original size.

• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to

MP3 only. ID3 tag is 15/30 characters (1.0 and

1.1), or 63/126 characters (2.2, 2.3 and 2.4).

• When naming an MP3 file, be sure to add the file

extension “.mp3” to the file name.

• During playback or fast-forward/reverse of a VBR

(variable bit rate) MP3 file, elapsed playing time

may not display accurately.

About WMA files

• WMA, which stands for Windows Media Audio,

is a music file compression format standard. It

compresses audio CD data to approximately 1/22*

of its original size.

• WMA tag is 63 characters.

• When naming a WMA file, be sure to add the file

extension “.wma” to the file name.

• During playback or fast-forward/reverse of a VBR

(variable bit rate) WMA file, elapsed playing time

may not display accurately.

* only for 64 kbps

Note on WMA

Playback of the following WMA files is not supported.

– lossless compression

– copyright-protected

Note on DualDiscs

A DualDisc is a two sided disc product which

mates DVD recorded material on one side with

digital audio material on the other side. However,

since the audio material side does not conform to

the Compact Disc (CD) standard, playback on this

product is not guaranteed.

Folder

(album)

MP3/WMA/

AAC file

(track)

MP3/WMA/AAC

About AAC files

• AAC, which stands for Advanced Audio Coding,

is a music file compression format standard. It

compresses audio CD data to approximately 1/11*

of its original size.

• AAC tag is 126 characters.

• When naming an AAC file, be sure to add the file

extension “.m4a” to the file name.

• During playback or fast-forward/reverse of a VBR

(variable bit rate) AAC file, elapsed playing time

may not display accurately.

* only for 128 kbps

Note on AAC

Playback of a copyright-protected file is not supported.

About ATRAC CD

ATRAC3plus format

ATRAC3, which stands for Adaptive Transform

Acoustic Coding3, is audio compression

technology. It compresses audio CD data to

approximately 1/10 of its original size.

ATRAC3plus, which is an extended format of

ATRAC3, compresses the audio CD data to

approximately 1/20 of its original size. The unit

accepts both ATRAC3 and ATRAC3plus format.

ATRAC CD

ATRAC CD is recorded audio CD data which is

compressed to ATRAC3 or ATRAC3plus format

using authorized software, such as SonicStage 2.0 or

later, or SonicStage Simple Burner.

• The maximum number of:

– folders (groups): 255

– files (tracks): 999

• The characters for a folder/file name and text

information written by SonicStage are displayed.

For details on ATRAC CD, see the SonicStage or

SonicStage Simple Burner manual.

Note

Be sure to create the ATRAC CD using authorized

software, such as SonicStage 2.0 or later, or

SonicStage Simple Burner 1.0 or 1.1.

About iPod

This unit can be used with the dock connector type

iPod, iPod photo, iPod mini and iPod nano with the

following software versions. All other versions

earlier than listed are not guaranteed.

– Third-generation iPod: Ver.2.3.0

– Fourth-generation iPod: Ver.3.1.1

– Fifth-generation iPod: Ver.1.2

– iPod photo: Ver.1.2.1

– iPod mini: Ver.1.4.1

– First-generation iPod nano: Ver.1.3

– Second-generation iPod nano: Ver.1.1

(video function of fifth-generation iPod and

photo function of iPod photo are not supported).

For customers in USA, please visit the following

site for further information:

http://www.xplodsony.com

If you have any questions or problems concerning

your unit that are not covered in this manual, consult

your nearest Sony dealer.

Maintenance

Replacing the lithium battery of the

card remote commander

Under normal conditions, the battery will last

approximately 1 year. (The service life may be

shorter, depending on the conditions of use.)

When the battery becomes weak, the range of the

card remote commander becomes shorter. Replace

the battery with a new CR2025 lithium battery. Use

of any other battery may present a risk of fire or

explosion.

Notes on the lithium battery

• Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

• Wipe the battery with a dry cloth to assure a good

contact.

• Be sure to observe the correct polarity when

installing the battery.

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Fuse replacement

When replacing the fuse, be

sure to use one matching the

amperage rating stated on the

original fuse. If the fuse blows,

check the power connection and

replace the fuse. If the fuse

blows again after replacement,

there may be an internal

malfunction. In such a case,

consult your nearest Sony

dealer.

+ side up

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

Fuse (10 A)

La pagina sta caricando ...

Sony CDX-H905IP Manuale utente

Marca: Sony

Modello: CDX-H905IP

Categoria: Ricevitori multimediali per auto

Tipo: Manuale utente

Questo manuale è adatto anche per

CDX-HR905IP

Scarica il pdf

rapporto

in altre lingue

English: Sony CDX-H905IP User manual
français: Sony CDX-H905IP Manuel utilisateur
español: Sony CDX-H905IP Manual de usuario
Deutsch: Sony CDX-H905IP Benutzerhandbuch
Nederlands: Sony CDX-H905IP Handleiding

Sony CDX-H905IP Manuale utente

Questo manuale è adatto anche per

Sony CDX-H905IP Manuale utente

in altre lingue

Documenti correlati

Altri documenti