ESAB LAE 800 Manuale utente
- Categoria
- Sistema di saldatura
- Tipo
- Manuale utente
455 420--001 98.09.25
Valid from Machine no 508-- XXX--XXX
LAE 800
Svetslikriktare
Svejseensretter
Likeretter for sveising
Hitsaustasasuuntaaja
Welding rectifier
Schweißgleichrichter
Redresseur de soudage
Lasgelijkrichter
Rectificador de soldadura
Raddrizzatore per saldatura
Rectificador de soldagem
ÁíïñèùôÞò óõãêüëëçóçò
Bruksanvisning
Brugsanvisning
Bruksanvisning
Käyttöohjeet
Instruction manual
Betriebsanweisung
Manual d’instructions
Gebruiksaanwijzing
Instrucciones de uso
Istruzioni per l’uso
Manual de instruções
Ïäçãßåò ÷ñÞóåùò
2
FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
SVENSKA
Esab Welding Equipment AB, 695 81 Laxå, Sverige, försäkrar under eget ansvar att
svetsströmkälla LAE 800 med nummer 508 är i överensstämmelse med standard
EN 60974--1 enligt villkoren i direktiv 73/23/EEG med tillägg 93/68/EEG.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
OVERENSSTEMMELSEERKLAERING
DANSK
Esab Welding Equipment AB, 695 81 Laxå, Sverige garanterer under eget ansvar, at
svejsestrømkilde LAE 800 med nummer 508 er i overensstemmelse med standard
EN 60974--1 ifølge betingelserne i direktiv 73/23/EEC med tillægg 93/68/EEC.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
FORSIKRING OM OVERENSSTEMMELSE
NORSK
Esab Welding Equipment AB, 695 81 Laxå, Sweden, forsikrer på eget ansvar at
sveisestrømkilde LAE 800 med nummer 508 er i samsvar med standard EN
60974--1 i overensstem melse med bestemmelsene i direktiv 73/23/EØF med tillegg
93/68/EØF
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
VAATIMUSTENMUKAISUUSVAKUUTUS
SUOMI
Esab Welding Equipment AB, 695 81 Laxå, Sweden, vakuuttaa omalla vastuullaan,
että hitsausvirtalähde LAE 800 numero 508 täyttää standardin EN 60974--1 vaati -
mukset direktiivin 73/23/EEC ja sen lisäyksen 93/68/EEC mukaisesti.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
DECLARATION OF CONFORMITY
ENGLISH
Esab Welding Equipment AB, 695 81 Laxå, Sweden, gives its unreserved guarantee
that welding power source LAE 800 having number 508 complies with standard EN
60974--1, in accordance with the requirements of directive 73/23/EEA and adden-
dum 93/68/EEA.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
KONFORMITÄTSERKLÄRUNG
DEUTSCH
Esab Welding Equipment AB, 695 81 Laxå Schweden, versichert hiermit auf eigene
Verantwortung, daß die Schweißstromquelle LAE 800 mit n--Nr 508 mit der norm EN
60974--1 gemäß den Bedingungen der Richtlinien 73/23/EWG m it der Ergänzung
93/68/EWG in Übereinstimmung steht.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
CERTIFICAT DE CONFORMITÉ
FRANÇAIS
Esab Welding Equipment AB, 695 81 Laxå Suède, certifie sous sa propre responsa-
bilité que la source de courant de soudage LAE 800 portant le numéro 508 répond
aux normes de qualité EN 60974--1 conformément aux directives 73/23/EEC avec
annexe 93/68/EEC.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
OVEREENSKOMSTIGHEIDSVERKLARING
NEDERLANDS
Esab Welding Equipment AB, 695 81 Laxå Sweden, verklaart op eigen verantwoor-
delijkheid dat lasstroombron LAE 800 met nummer 508 overeenkomt met nor m EN
60974--1 volgens richtlijn 73/23/EEG van de Raad met toevoeging 93/68/EEG.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
3
DECLARACIÓN DE CONFORMIDAD
ESPAÑOL
Esab Welding Equipment AB, 695 81 Laxå, Suecia, declara, asumiendo toda res -
ponsabilidad, que la fuente de corriente para soldadura LAE 800 con el número de
508 está fabricada de conformidad con la normativa EN 60974 --1 según los requisi-
tos de la directiva 73/23/EEC con el suplemento 93/68/EEC.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
DICHIARAZIONE DI CONFORMITA
ITALIANO
Esab Welding Equipment AB, 695 81 Laxå Swezia, dichiara sotto la propria respon -
sabilità che il generatore per saldatura LAE 800 numero di 508 è conforme alla nor-
ma EN 60974 --1 ai sensi dei requisiti previsti dalla direttiva 73/23/CEE e successive
integrazioni nella direttiva 93/68/CEE.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
DECLARAÇÃO DE CONFORMIDADE
PORTUGUÊS
Esab Welding Equipment AB, 695 81 Laxå Suécia, certifica, sob a sua própria res-
ponsabilidade que, a fonte de corrente para soldadura LAE 800 número 508 está
em conformidade com a norma EN 60974--1, segundo os requisitos constantes na
directiva 73/23/EEC e com o suplemento 93/68/EEC.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
ÂÅÂÁÉÙÓÇ ÓØÌÖÙÍÉÁÓ
Åëëçíéêá
Ç Esab Welding Equipment AB, 695 81 Laxå Sweden, âåâáéþíåé ìå äéêÞ ôçò åõèýíç
oôé ç ðçãÞ óõãêïëëçôéêïý ñåýìáôïò LAE 800 ìå áñéèìü 508 âñßóêåôáé óå
óõìöùíßá ìå ôï ïôáíôáñô ÅÍ 609741 óýìöùíá ìå ôïõ üñïõò ôçò ïäçãßáò
73/23/ÅÅC êáé ôçí ðñïóèÞêç 93/68/ÅÅC.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Paul Karlsson
Managing Director
Esab Welding Equipment AB
695 81 LAXÅ
SWEDEN Tel: + 46 584 81176 Fax: + 46 584 12336
Laxå 95--04--10
-- 4 --
Rätt till ändring av specifikationer utan avi sering förbehål les.
Ret til ændrin g af specifikationer uden varsel forbeholdes.
Rett til å endre spesifikasjoner uten varsel forbeholdes.
Oikeudet muutoksiin pidätetään.
Rights reserved to alter speci fications wi thout notice.
Änderungen vorbehalten.
Sous réserve de modifications sans avis préal able.
Recht op wijzigingen zonder voorafgaande mededeling voorbehouden.
Reservado el derecho de cambiar las especificaciones sin previo aviso.
Ci riserviamo il diritto di variare le specifiche senza preavviso.
Reservamo--nos o direi to de alterar as especifi cações sem aviso prévio.
Äéáôçñåßôáé ôï äéêáßùìá ôñïðïðïßçóçò ðñïäéáãñáöþí ×ùñßò ðñïåéäïðïßçóç.
SVENSKA 5..............................................
DANSK 10................................................
NORSK 15................................................
SUOMI 20................................................
ENGLISH 25..............................................
DEUTSCH 30.............................................
FRANÇAIS 36.............................................
NEDERLANDS 41.........................................
ESPAÑOL 46..............................................
ITALIANO 51..............................................
PORTUGUÊS 56..........................................
ÅËËÇÍÉÊÁ 61.............................................
ENGLISH
TOCe
-- 2 5 --
1 INTRODUCTION 26...................................................
1.1 TECHNICAL DESCRIPTION 27................................................
1.2 TECHNICAL DATA 27........................................................
1.3 INST ALLATION 28...........................................................
1.4 OPERATION 29.............................................................
1.5 MAINTENANCE 29...........................................................
DIAGRAM 66............................................................
SPARE PARTS LIST 67...................................................
-- 2 6 --
ba10d12e
1 INTRODUCTION
LAE 800 is a constant voltage welding rectifier. It is designed SOLELY for
submerged arc and gas metal welding (MIG/MAG).
LAE 800 is designed for use with PEG--1 control equipment.
The welding current range can be extended by connecting two welding rectifiers in
parallel. To ensure the correct division of current between welding rectifiers a
parallel operation device is required.(Order no. 321 181--880).
WARNING
This product is intended for industrial use. In a domestic environment this product
may cause radio interference. It is the users responsibility to take adequate p r e-
cautions.
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working s tance is safe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to keep fumes and gases from your breathing zone and
the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect your ears. Use ear defenders or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
GB
-- 2 7 --ba10d12e
1.1 TECHNICAL DESCRIPTION
LAE 800 is a fan--cooled welding rectifier. It is fitted with a thermal cut--out to provide
protection against overloading or failure of the fan.
If this cut--out is activated a yellow lamp on the front panel lights up automatically.
When the rectifier has cooled down the cut--out is automatically reset.
Mains supply 50 Hz 60 Hz
Voltage (V) 230/400/415/500 230/440/550
Primary current (A) 111/64/64/52 111/64/52
Fuse, slow (A) 125/63/63/63 125/63/63
Power cable, area (mm
2
) 4x50/4x16/4x16/4x16 4x50/4x16/4x16
1.2 TECHNICAL DATA
Maximum load at
100 % duty cycle 800 A / 44 V
Settings range 40 A / 13 --22 V--800 A / 44 V
Open circuit voltage 50,4 V
Open circuit power 145 W
Power factor at maximum current 0,95
Efficiency at maximum current 84 %
Enclosure class IP 23
Application class
Weight 330 kg
Dimensions lxbxh 646x552x1090
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Welding power source complies with IEC 974--1
Power cable r ating complies with Swedish regulations.
The symbol indicates that the power source is designed for use in areas where
there is an increased electrical hazard.
The IP code indicates the enclosure class, i. e. the degree of protection against
penetration by solid objects or water.
Equipment marked IP 23 is designed for indoor and outdoor use.
GB
-- 2 8 --
ba10d12e
1.3 INSTALLATION
1. Installation must be carried out by a qualified electrician.
2. Make sure the welding rectifier is set up for the available
mains supply before connecting to the mains.
3. If the control voltage is switched between 42 V and 110 V, make sure the revers -
ible rating plate shows the correct voltage.
4. For information on power cable area and fuse size, refer to technical data.
5. Connect the power cable to the rectifier in accordance with local regulations, and
make sure the correct fuse is fitted in the fuse box.
6. Check that the cooling vents on the rectifier are not obstructed.
GB
-- 2 9 --ba10d12e
1.4 OPERATION
S Turn the switch (1) to setting ”I”. The whi-
te lamp (2) should light up and the fan will
start.
S Adjust the welding voltage using the knob
(3) on the front panel.
S If you are using a remote connect it to the
socket (4) on the front panel and set the
toggle switch (5) to the remote setting.
S Choose a suitable welding cable and re-
turn cab le and connect these to + and --
on the front of the machine. Connect the
return cable to the work piece.
S T he rectifier is now ready for welding.
S 8 pin socket for external control (6)
S 1 pin socket for meter cable (7)
S Space for digital meters (8) (optional)
S Yellow lamp (9) (overload cut--out)
1.5 MAINTENANCE
Blow the power source clean at least once a year using dry compressed air at
reduced pressure.
If the power source is used in a dusty or dirty environment it should be blown clean
more often.
Ordering sp are parts
When ordering parts please state the machine model, serial number and name and
spare part number as shown in the list of spare parts.
This facilitates dispatch and ensures a correct delivery.
GB
ba10d001
ESAB AB
SE--695 81 LAXÅ
SWEDEN
Phone +46 584 81 000
Fax + 46 584 123 08
www.esab.com
020314
ESAB subsidiaries and representative offices
Europe
AUSTRIA
ESAB Ges.m.b.H
Vienna--Liesing
Tel: +43 1 888 25 11
Fax: +43 1 888 25 11 85
BELGIUM
S.A. ESAB N.V.
Brussels
Tel: +32 2 745 11 00
Fax: +32 2 726 80 05
THE CZECH REPUBLIC
ESAB V AMBERK s.r.o.
Prague
Tel: +420 2 819 40 885
Fax: +420 2 819 40 120
DENMARK
Aktieselskabet ESAB
Copenhagen--Valby
Tel:+4536300111
Fax:+4536304003
FINLAND
ESAB Oy
Helsinki
Tel: +358 9 547 761
Fax: +358 9 547 77 71
FRANCE
ESAB France S.A.
Cergy Pontoise
Tel:+33130755500
Fax:+33130755524
GERMANY
ESAB GmbH
Solingen
Tel: +49 212 298 0
Fax: +49 212 298 204
GREAT BRITAIN
ESAB Group (UK) Ltd
Waltham Cross
Tel: +44 1992 76 85 15
Fax: +44 1992 71 58 03
ESAB Automation Ltd
Andover
Tel: +44 1264 33 22 33
Fax: +44 1264 33 20 74
HUNGARY
ESAB Kft
Budapest
Tel:+3612044182
Fax:+3612044186
ITALY
ESAB Saldatura S.p.A.
Mesero (Mi)
Tel:+3902979681
Fax:+390297289181
THE NETHERLANDS
ESAB Nederland B.V.
Utrecht
Tel: +31 30 248 59 22
Fax: +31 30 248 52 60
NORWAY
AS ESAB
Larvik
Tel:+4733121000
Fax:+4733115203
POLAND
ESAB Sp.z.o.o
Warszaw
Tel: +48 22 813 99 63
Fax: +48 22 813 98 81
PORTUGAL
ESAB Lda
Lisbon
Tel: +351 1 837 1527
Fax: +351 1 859 1277
SLOVAKIA
ESAB Slovakia s.r.o.
Bratislava
Tel:+421744882426
Fax:+421744888741
SPAIN
ESAB Ibérica S.A.
Alcobendas (Madrid)
Tel: +34 91 623 11 00
Fax: +34 91 661 51 83
SWEDEN
ESAB Sverige AB
Gothenburg
Tel:+4631509500
Fax:+4631509222
ESAB International AB
Gothenburg
Tel:+4631509000
Fax:+4631509360
SWITZERLAND
ESAB AG
Dietikon
Tel: +41 1 741 25 25
Fax: +41 1 740 30 55
North and South America
ARGENTINA
CONARCO
Buenos Aires
Tel: +54 11 4 753 4039
Fax: +54 11 4 753 6313
BRAZIL
ESAB S.A.
Contagem--MG
Tel: +55 31 333 43 33
Fax: +55 31 361 31 51
CANADA
ESAB Group Canada Inc.
Missisauga, Ontario
Tel: +1 905 670 02 20
Fax: +1 905 670 48 79
MEXICO
ESAB Mexico S.A.
Monterrey
Tel: +52 8 350 5959
Fax: +52 8 350 7554
USA
ESAB Welding & Cutting Products
Florence, SC
Tel: +1 843 669 44 11
Fax: +1 843 664 44 58
Asia/Pacific
AUSTRALIA
ESAB Australia Pty Ltd
Ermington
Tel: +61 2 9647 1232
Fax: +61 2 9748 1685
CHINA
Shanghai ESAB A/P
Shanghai
Tel: +86 21 6539 7124
Fax: +86 21 6543 6622
INDIA
ESAB India Ltd
Calcutta
Tel: +91 33 478 45 17
Fax: +91 33 468 18 80
INDONESIA
P.T. Esabindo Pratama
Jakarta
Tel: +62 21 460 01 88
Fax: +62 21 461 29 29
MALAYSIA
ESAB (Malaysia) Snd Bhd
Selangor
Tel: +60 3 703 36 15
Fax: +60 3 703 35 52
SINGAPORE
ESAB Singapore Pte Ltd
Singapore
Tel: +65 861 43 22
Fax: +65 861 31 95
ESAB Asi a/Pacific Pte Ltd
Singapore
Tel: +65 861 74 42
Fax: +65 863 08 39
SOUTH KOREA
ESAB SeA H Corporation
Kyung --Nam
Tel: +82 551 289 81 11
Fax: +82 551 289 88 63
UNITED ARAB EMIRATES
ESAB Middle East
Dubai
Tel: +971 4 338 88 29
Fax: +971 4 338 87 29
Representative offices
BULGARIA
ESAB Representative Office
Sofia
Tel/Fax: +359 2 974 42 88
EGYPT
ESAB Egypt
Dokki--Cairo
Tel: +20 2 390 96 69
Fax: +20 2 393 32 13
ROMANIA
ESAB Representative Office
Bucharest
Tel/Fax: +40 1 322 36 74
RUSSIA--CIS
ESAB Representative Office
Moscow
Tel: +7 095 937 98 20
Fax: +7 095 937 95 80
ESAB Representative Office
St Petersburg
Tel: +7 812 325 43 62
Fax: +7 812 325 66 85
Distributors
For addresses and phone
numbers to our distributors in
other countries, please visit our
home page
www.esab.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
ESAB LAE 800 Manuale utente
- Categoria
- Sistema di saldatura
- Tipo
- Manuale utente
in altre lingue
- English: ESAB LAE 800 User manual
Documenti correlati
-
ESAB LAE 1000 60% Manuale utente
-
-
-
-
-
-
-
-
-