ESAB LAE 800 Manuale utente

Marca: ESAB

Modello: LAE 800

Categoria: Sistema di saldatura

Tipo: Manuale utente

455 420--001 98.09.25

Valid from Machine no 508-- XXX--XXX

LAE 800

Svetslikriktare

Svejseensretter

Likeretter for sveising

Hitsaustasasuuntaaja

Welding rectifier

Schweißgleichrichter

Redresseur de soudage

Lasgelijkrichter

Rectificador de soldadura

Raddrizzatore per saldatura

Rectificador de soldagem

ÁíïñèùôÞò óõãêüëëçóçò

Bruksanvisning

Brugsanvisning

Bruksanvisning

Käyttöohjeet

Instruction manual

Betriebsanweisung

Manual d’instructions

Gebruiksaanwijzing

Instrucciones de uso

Istruzioni per l’uso

Manual de instruções

Ïäçãßåò ÷ñÞóåùò

FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

SVENSKA

Esab Welding Equipment AB, 695 81 Laxå, Sverige, försäkrar under eget ansvar att

svetsströmkälla LAE 800 med nummer 508 är i överensstämmelse med standard

EN 60974--1 enligt villkoren i direktiv 73/23/EEG med tillägg 93/68/EEG.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

OVERENSSTEMMELSEERKLAERING

DANSK

Esab Welding Equipment AB, 695 81 Laxå, Sverige garanterer under eget ansvar, at

svejsestrømkilde LAE 800 med nummer 508 er i overensstemmelse med standard

EN 60974--1 ifølge betingelserne i direktiv 73/23/EEC med tillægg 93/68/EEC.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

FORSIKRING OM OVERENSSTEMMELSE

NORSK

Esab Welding Equipment AB, 695 81 Laxå, Sweden, forsikrer på eget ansvar at

sveisestrømkilde LAE 800 med nummer 508 er i samsvar med standard EN

60974--1 i overensstem melse med bestemmelsene i direktiv 73/23/EØF med tillegg

93/68/EØF

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

VAATIMUSTENMUKAISUUSVAKUUTUS

SUOMI

Esab Welding Equipment AB, 695 81 Laxå, Sweden, vakuuttaa omalla vastuullaan,

että hitsausvirtalähde LAE 800 numero 508 täyttää standardin EN 60974--1 vaati -

mukset direktiivin 73/23/EEC ja sen lisäyksen 93/68/EEC mukaisesti.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

DECLARATION OF CONFORMITY

ENGLISH

Esab Welding Equipment AB, 695 81 Laxå, Sweden, gives its unreserved guarantee

that welding power source LAE 800 having number 508 complies with standard EN

60974--1, in accordance with the requirements of directive 73/23/EEA and adden-

dum 93/68/EEA.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

KONFORMITÄTSERKLÄRUNG

DEUTSCH

Esab Welding Equipment AB, 695 81 Laxå Schweden, versichert hiermit auf eigene

Verantwortung, daß die Schweißstromquelle LAE 800 mit n--Nr 508 mit der norm EN

60974--1 gemäß den Bedingungen der Richtlinien 73/23/EWG m it der Ergänzung

93/68/EWG in Übereinstimmung steht.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

CERTIFICAT DE CONFORMITÉ

FRANÇAIS

Esab Welding Equipment AB, 695 81 Laxå Suède, certifie sous sa propre responsa-

bilité que la source de courant de soudage LAE 800 portant le numéro 508 répond

aux normes de qualité EN 60974--1 conformément aux directives 73/23/EEC avec

annexe 93/68/EEC.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

OVEREENSKOMSTIGHEIDSVERKLARING

NEDERLANDS

Esab Welding Equipment AB, 695 81 Laxå Sweden, verklaart op eigen verantwoor-

delijkheid dat lasstroombron LAE 800 met nummer 508 overeenkomt met nor m EN

60974--1 volgens richtlijn 73/23/EEG van de Raad met toevoeging 93/68/EEG.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

DECLARACIÓN DE CONFORMIDAD

ESPAÑOL

Esab Welding Equipment AB, 695 81 Laxå, Suecia, declara, asumiendo toda res -

ponsabilidad, que la fuente de corriente para soldadura LAE 800 con el número de

508 está fabricada de conformidad con la normativa EN 60974 --1 según los requisi-

tos de la directiva 73/23/EEC con el suplemento 93/68/EEC.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

DICHIARAZIONE DI CONFORMITA

ITALIANO

Esab Welding Equipment AB, 695 81 Laxå Swezia, dichiara sotto la propria respon -

sabilità che il generatore per saldatura LAE 800 numero di 508 è conforme alla nor-

ma EN 60974 --1 ai sensi dei requisiti previsti dalla direttiva 73/23/CEE e successive

integrazioni nella direttiva 93/68/CEE.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

DECLARAÇÃO DE CONFORMIDADE

PORTUGUÊS

Esab Welding Equipment AB, 695 81 Laxå Suécia, certifica, sob a sua própria res-

ponsabilidade que, a fonte de corrente para soldadura LAE 800 número 508 está

em conformidade com a norma EN 60974--1, segundo os requisitos constantes na

directiva 73/23/EEC e com o suplemento 93/68/EEC.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

ÂÅÂÁÉÙÓÇ ÓØÌÖÙÍÉÁÓ

Åëëçíéêá

Ç Esab Welding Equipment AB, 695 81 Laxå Sweden, âåâáéþíåé ìå äéêÞ ôçò åõèýíç

oôé ç ðçãÞ óõãêïëëçôéêïý ñåýìáôïò LAE 800 ìå áñéèìü 508 âñßóêåôáé óå

óõìöùíßá ìå ôï ïôáíôáñô ÅÍ 609741 óýìöùíá ìå ôïõ üñïõò ôçò ïäçãßáò

73/23/ÅÅC êáé ôçí ðñïóèÞêç 93/68/ÅÅC.

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

Paul Karlsson

Managing Director

Esab Welding Equipment AB

695 81 LAXÅ

SWEDEN Tel: + 46 584 81176 Fax: + 46 584 12336

Laxå 95--04--10

-- 4 --

Rätt till ändring av specifikationer utan avi sering förbehål les.

Ret til ændrin g af specifikationer uden varsel forbeholdes.

Rett til å endre spesifikasjoner uten varsel forbeholdes.

Oikeudet muutoksiin pidätetään.

Rights reserved to alter speci fications wi thout notice.

Änderungen vorbehalten.

Sous réserve de modifications sans avis préal able.

Recht op wijzigingen zonder voorafgaande mededeling voorbehouden.

Reservado el derecho de cambiar las especificaciones sin previo aviso.

Ci riserviamo il diritto di variare le specifiche senza preavviso.

Reservamo--nos o direi to de alterar as especifi cações sem aviso prévio.

Äéáôçñåßôáé ôï äéêáßùìá ôñïðïðïßçóçò ðñïäéáãñáöþí ×ùñßò ðñïåéäïðïßçóç.

SVENSKA 5..............................................

DANSK 10................................................

NORSK 15................................................

SUOMI 20................................................

ENGLISH 25..............................................

DEUTSCH 30.............................................

FRANÇAIS 36.............................................

NEDERLANDS 41.........................................

ESPAÑOL 46..............................................

ITALIANO 51..............................................

PORTUGUÊS 56..........................................

ÅËËÇÍÉÊÁ 61.............................................

ENGLISH

TOCe

-- 2 5 --

1 INTRODUCTION 26...................................................

1.1 TECHNICAL DESCRIPTION 27................................................

1.2 TECHNICAL DATA 27........................................................

1.3 INST ALLATION 28...........................................................

1.4 OPERATION 29.............................................................

1.5 MAINTENANCE 29...........................................................

DIAGRAM 66............................................................

SPARE PARTS LIST 67...................................................

-- 2 6 --

ba10d12e

1 INTRODUCTION

LAE 800 is a constant voltage welding rectifier. It is designed SOLELY for

submerged arc and gas metal welding (MIG/MAG).

LAE 800 is designed for use with PEG--1 control equipment.

The welding current range can be extended by connecting two welding rectifiers in

parallel. To ensure the correct division of current between welding rectifiers a

parallel operation device is required.(Order no. 321 181--880).

WARNING

This product is intended for industrial use. In a domestic environment this product

may cause radio interference. It is the users responsibility to take adequate p r e-

cautions.

WARNING

READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.

ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-

TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE

BASED ON MANUFACTURERS’ HAZARD DATA.

ELECTRIC SHOCK -- Can kill

S Install and earth the welding unit in accordance with applicable standards.

S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.

S Insulate yourself from earth and the workpiece.

S Ensure your working s tance is safe.

FUMES AND GASES -- Can be dangerous to health

S Keep your head out of the fumes.

S Use ventilation, extraction at the arc, or both, to keep fumes and gases from your breathing zone and

the general area.

ARC RAYS -- Can injure eyes and burn skin.

S Protect your eyes and body. Use the correct welding screen and filter lens and wear protective

clothing.

S Protect bystanders with suitable screens or curtains.

FIRE HAZARD

S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.

NOISE -- Excessive noise can damage hearing

S Protect your ears. Use ear defenders or other hearing protection.

S Warn bystanders of the risk.

MALFUNCTION -- Call for expert assistance in the event of malfunction.

PROTECT YOURSELF AND OTHERS!

-- 2 7 --ba10d12e

1.1 TECHNICAL DESCRIPTION

LAE 800 is a fan--cooled welding rectifier. It is fitted with a thermal cut--out to provide

protection against overloading or failure of the fan.

If this cut--out is activated a yellow lamp on the front panel lights up automatically.

When the rectifier has cooled down the cut--out is automatically reset.

Mains supply 50 Hz 60 Hz

Voltage (V) 230/400/415/500 230/440/550

Primary current (A) 111/64/64/52 111/64/52

Fuse, slow (A) 125/63/63/63 125/63/63

Power cable, area (mm

) 4x50/4x16/4x16/4x16 4x50/4x16/4x16

1.2 TECHNICAL DATA

Maximum load at

100 % duty cycle 800 A / 44 V

Settings range 40 A / 13 --22 V--800 A / 44 V

Open circuit voltage 50,4 V

Open circuit power 145 W

Power factor at maximum current 0,95

Efficiency at maximum current 84 %

Enclosure class IP 23

Application class

Weight 330 kg

Dimensions lxbxh 646x552x1090

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

Welding power source complies with IEC 974--1

Power cable r ating complies with Swedish regulations.

The symbol indicates that the power source is designed for use in areas where

there is an increased electrical hazard.

The IP code indicates the enclosure class, i. e. the degree of protection against

penetration by solid objects or water.

Equipment marked IP 23 is designed for indoor and outdoor use.

-- 2 8 --

ba10d12e

1.3 INSTALLATION

1. Installation must be carried out by a qualified electrician.

2. Make sure the welding rectifier is set up for the available

mains supply before connecting to the mains.

3. If the control voltage is switched between 42 V and 110 V, make sure the revers -

ible rating plate shows the correct voltage.

4. For information on power cable area and fuse size, refer to technical data.

5. Connect the power cable to the rectifier in accordance with local regulations, and

make sure the correct fuse is fitted in the fuse box.

6. Check that the cooling vents on the rectifier are not obstructed.

-- 2 9 --ba10d12e

1.4 OPERATION

S Turn the switch (1) to setting ”I”. The whi-

te lamp (2) should light up and the fan will

start.

S Adjust the welding voltage using the knob

(3) on the front panel.

S If you are using a remote connect it to the

socket (4) on the front panel and set the

toggle switch (5) to the remote setting.

S Choose a suitable welding cable and re-

turn cab le and connect these to + and --

on the front of the machine. Connect the

return cable to the work piece.

S T he rectifier is now ready for welding.

S 8 pin socket for external control (6)

S 1 pin socket for meter cable (7)

S Space for digital meters (8) (optional)

S Yellow lamp (9) (overload cut--out)

1.5 MAINTENANCE

Blow the power source clean at least once a year using dry compressed air at

reduced pressure.

If the power source is used in a dusty or dirty environment it should be blown clean

more often.

Ordering sp are parts

When ordering parts please state the machine model, serial number and name and

spare part number as shown in the list of spare parts.

This facilitates dispatch and ensures a correct delivery.

ba10d001

ESAB AB

SE--695 81 LAXÅ

SWEDEN

Phone +46 584 81 000

Fax + 46 584 123 08

www.esab.com

020314

ESAB subsidiaries and representative offices

Europe

AUSTRIA

ESAB Ges.m.b.H

Vienna--Liesing

Tel: +43 1 888 25 11

Fax: +43 1 888 25 11 85

BELGIUM

S.A. ESAB N.V.

Brussels

Tel: +32 2 745 11 00

Fax: +32 2 726 80 05

THE CZECH REPUBLIC

ESAB V AMBERK s.r.o.

Prague

Tel: +420 2 819 40 885

Fax: +420 2 819 40 120

DENMARK

Aktieselskabet ESAB

Copenhagen--Valby

Tel:+4536300111

Fax:+4536304003

FINLAND

ESAB Oy

Helsinki

Tel: +358 9 547 761

Fax: +358 9 547 77 71

FRANCE

ESAB France S.A.

Cergy Pontoise

Tel:+33130755500

Fax:+33130755524

GERMANY

ESAB GmbH

Solingen

Tel: +49 212 298 0

Fax: +49 212 298 204

GREAT BRITAIN

ESAB Group (UK) Ltd

Waltham Cross

Tel: +44 1992 76 85 15

Fax: +44 1992 71 58 03

ESAB Automation Ltd

Andover

Tel: +44 1264 33 22 33

Fax: +44 1264 33 20 74

HUNGARY

ESAB Kft

Budapest

Tel:+3612044182

Fax:+3612044186

ITALY

ESAB Saldatura S.p.A.

Mesero (Mi)

Tel:+3902979681

Fax:+390297289181

THE NETHERLANDS

ESAB Nederland B.V.

Utrecht

Tel: +31 30 248 59 22

Fax: +31 30 248 52 60

NORWAY

AS ESAB

Larvik

Tel:+4733121000

Fax:+4733115203

POLAND

ESAB Sp.z.o.o

Warszaw

Tel: +48 22 813 99 63

Fax: +48 22 813 98 81

PORTUGAL

ESAB Lda

Lisbon

Tel: +351 1 837 1527

Fax: +351 1 859 1277

SLOVAKIA

ESAB Slovakia s.r.o.

Bratislava

Tel:+421744882426

Fax:+421744888741

SPAIN

ESAB Ibérica S.A.

Alcobendas (Madrid)

Tel: +34 91 623 11 00

Fax: +34 91 661 51 83

SWEDEN

ESAB Sverige AB

Gothenburg

Tel:+4631509500

Fax:+4631509222

ESAB International AB

Gothenburg

Tel:+4631509000

Fax:+4631509360

SWITZERLAND

ESAB AG

Dietikon

Tel: +41 1 741 25 25

Fax: +41 1 740 30 55

North and South America

ARGENTINA

CONARCO

Buenos Aires

Tel: +54 11 4 753 4039

Fax: +54 11 4 753 6313

BRAZIL

ESAB S.A.

Contagem--MG

Tel: +55 31 333 43 33

Fax: +55 31 361 31 51

CANADA

ESAB Group Canada Inc.

Missisauga, Ontario

Tel: +1 905 670 02 20

Fax: +1 905 670 48 79

MEXICO

ESAB Mexico S.A.

Monterrey

Tel: +52 8 350 5959

Fax: +52 8 350 7554

USA

ESAB Welding & Cutting Products

Florence, SC

Tel: +1 843 669 44 11

Fax: +1 843 664 44 58

Asia/Pacific

AUSTRALIA

ESAB Australia Pty Ltd

Ermington

Tel: +61 2 9647 1232

Fax: +61 2 9748 1685

CHINA

Shanghai ESAB A/P

Shanghai

Tel: +86 21 6539 7124

Fax: +86 21 6543 6622

INDIA

ESAB India Ltd

Calcutta

Tel: +91 33 478 45 17

Fax: +91 33 468 18 80

INDONESIA

P.T. Esabindo Pratama

Jakarta

Tel: +62 21 460 01 88

Fax: +62 21 461 29 29

MALAYSIA

ESAB (Malaysia) Snd Bhd

Selangor

Tel: +60 3 703 36 15

Fax: +60 3 703 35 52

SINGAPORE

ESAB Singapore Pte Ltd

Singapore

Tel: +65 861 43 22

Fax: +65 861 31 95

ESAB Asi a/Pacific Pte Ltd

Singapore

Tel: +65 861 74 42

Fax: +65 863 08 39

SOUTH KOREA

ESAB SeA H Corporation

Kyung --Nam

Tel: +82 551 289 81 11

Fax: +82 551 289 88 63

UNITED ARAB EMIRATES

ESAB Middle East

Dubai

Tel: +971 4 338 88 29

Fax: +971 4 338 87 29

Representative offices

BULGARIA

ESAB Representative Office

Sofia

Tel/Fax: +359 2 974 42 88

EGYPT

ESAB Egypt

Dokki--Cairo

Tel: +20 2 390 96 69

Fax: +20 2 393 32 13

ROMANIA

ESAB Representative Office

Bucharest

Tel/Fax: +40 1 322 36 74

RUSSIA--CIS

ESAB Representative Office

Moscow

Tel: +7 095 937 98 20

Fax: +7 095 937 95 80

ESAB Representative Office

St Petersburg

Tel: +7 812 325 43 62

Fax: +7 812 325 66 85

Distributors

For addresses and phone

numbers to our distributors in

other countries, please visit our

home page

www.esab.com

ESAB LAE 800 Manuale utente

Marca: ESAB

Modello: LAE 800

Categoria: Sistema di saldatura

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: ESAB LAE 800 User manual

ESAB LAE 800 Manuale utente

ESAB LAE 800 Manuale utente

in altre lingue

Documenti correlati