Lindy Bidirectional HDCP Converter, v2.2 and v1.4 Manuale utente

Tipo
Manuale utente
© LINDY Group THIRD EDITION
Bidirectional HDCP Converter
User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano
No. 38166
Tested to Comply with
FCC Standards
For Home and Office Use!
lindy.com
User Manual English
Introduction
Thank you for purchasing the LINDY Bidirectional HDCP Converter. This product has
been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2
year warranty and free lifetime technical support. To ensure correct use, please read this
manual carefully and retain it for future reference.
Package Contents
Bidirectional HDCP Converter
USB Micro-B Cable, 0.70m
Lindy Manual
Features
HDCP v2.2 to v1.4 Conversion
HDCP v1.4 to v2.2 Conversion
Easy to read LEDs
HDMI 2.0 10.2G pass-through up to 4k 60Hz 4:2:0 8bit*
Provides HDMI Jitter Cleaning on the signal path
*Please note: HDCP 2.2 is not supported with 18G input signals
Operation
The Bidirectional HDCP Converter will convert either HDCP v1.4 to HDCP v2.2 or HDCP
v2.2 to v1.4. If both devices have the same HDCP version then the unit will operate in a
pass through mode.
To use simply connect a HDMI cable from your source to the input and a HDMI cable from
the output to the display. A USB Micro-B port is provided if your source does not provide
enough power.LEDs indicate the input and output HDCP version, Red LED v1.4, Blue
LED - v2.2. No LEDs indicate that no HDCP is present on the source.
Benutzerhandbuch Deutsch
Einführung
Wir freuen uns, dass Ihre Wahl auf ein LINDY-Produkt gefallen ist und danken Ihnen für
Ihr Vertrauen. Sie können sich jederzeit auf unsere Produkte und einen guten Service
verlassen. Dieser bidirektionale HDCP Konverter unterliegt einer 2-Jahres LINDY
Herstellergarantie und lebenslangem kostenlosen, technischen Support. Bitte lesen Sie
diese Anleitung sorgfältig und bewahren Sie sie auf.
Lieferumfang
Bidirektionaler HDCP Konverter
USB Micro-B Kabel, 70cm
LINDY Handbuch
Eigenschaften
Konvertiert HDCP 2.2 in HDCP 1.4
Konvertiert HDCP 1.4 in HDCP 2.2
LED - Anzeige
HDMI 2.0 10.2G Pass Through bis 4k 60Hz 4:2:0 8Bit*
Unterstützt HDMI Jitter-Korrektur auf dem Signalpfad
*Bitte beachten: HDCP 2.2 wird nicht bei 18G Eingangssignalen unterstützt
Betrieb
Der bidirektionale HDCP Konverter konvertiert HDCP 1.4 in 2.2 oder HDCP 2.2 in 1.4.
Wenn beide Geräte dieseIbe HDCP Version haben, werden sie im Pass Through-Modus
arbeiten.
Verbinden Sie mit einem HDMI Kabel Ihr Quellgerät mit dem Eingang des Konverters. Mit
einem weiteren HDMI Kabel verbinden Sie Ihr Display mit dem Ausgang des Konverters.
Ein USB Micro-B Anschluss ermöglicht den Anschluss eines Netzteils (nicht enthalten),
falls Ihr Quellgerät nicht genug Strom liefern sollte.
LEDs zeigen die HDCP Version des Eingang und Ausgangs an: rote LED zeigt HDCP
1.4 an, blaue LED HDCP 2.2. Wenn die LEDs nicht leuchten unterstützt das
Quellgerät kein HDCP.
Manuel Utilisateur Français
Introduction
Nous sommes heureux que votre choix se soit porté sur un produit LINDY et vous
remercions de votre confiance. Vous pouvez compter à tout moment sur la qualité de
nos produits et de notre service. Ce convertisseur HDCP bidirectionnel LINDY est
soumis à une durée de garantie LINDY de 2 ans et d’une assistance technique gratuite
à vie. Merci de lire attentivement ces instructions et de les conserver pour future
référence.
Contenu de la livraison
Convertisseur HDCP bidirectionnel
Câble USB Micro-B, 0.70m
Caractéristiques
Conversion HDCP v2.2 vers v1.4
Conversion HDCP v1.4 vers v2.2
LEDs d’état
Bypass HDMI 2.0 10.2G jusqu’à 4k 60Hz 4:2:0 8bit*
Fonction HDMI Jitter Cleaning du signal (nettoyage de gigue)
*Merci de noter: l’HDCP 2.2 n’est pas pris en charge avec des signaux 18G en entrée
Utilisation
Le convertisseur HDCP bidirectionnel convertit aussi bien les versions HDCP v1.4 vers
HDCP v2.2 que HDCP v2.2 vers v1.4. Si les deux appareils possèdent la même version
HDCP l’unité fonctionnera en mode bypass.
Pour l’utilisation, connectez un câble HDMI de votre source à l’entrée et un câble HDMI
de la sortie à votre affichage. Un port USB Micro-B est disponible pour l’éventualité
votre source ne fournit pas suffisamment de courant pour alimenter l’appareil.
Les LED indique la version HDCP en entrée et en sortie, LED rouge v1.4, LED bleue -
v2.2. Aucune LED allumée signifie qu’aucun signal HDCP n’est présent sur votre
source.
Manuale Italiano
Introduzione
Vi ringraziamo per aver acquistato il convertitore bidirezionale HDCP LINDY. Questo
prodotto è stato progettato per garantirvi la massima affidabilità e semplicità di utilizzo
ed è coperto da 2 anni di garanzia LINDY oltre che da un servizio di supporto tecnico a
vita. Per assicurarvi di farne un uso corretto vi invitiamo a leggere attentamente questo
manuale e a conservarlo per future consultazioni.
Contenuto della confezione
Convertitore HDCP Bidirezionale
Cavo USB Micro-B (Lunghezza: 0,70m)
Caratteristiche
Conversione HDCP da v2.2 a v1.4
Conversione HDCP da v1.4 a v2.2
Provvisto di LED di facile lettura
Compatibile con segnale HDMI 2.0 10.2G passante fino a 4K 60Hz 4:2:0 8 bit*
Provvede alla rimozione dei Jitter (errori) dal segnale HDMI
*Nota Bene: la codifica HDCP 2.2 non è supportata con segnali 18G in ingresso
Utilizzo
Questo convertitore HDCP bidirezionale trasforma sia una codifica v2.2 in una v1.4 che
una v1.4 in una v2.2. Se entrambi i dispositivi utilizzano lo stesso protocollo il dispositivo
si configurerà automaticamente in modalità passante (pass through).
Per utilizzarlo è sufficiente collegarlo ad un cavo HDMI proveniente dalla sorgente e ad
un cavo collegato allo schermo da utilizzare. Nel caso questi dispositivi non fornissero
abbastanza corrente è possibile collegare la porta micro-USB del convertitore ad una
porta o alimentatore USB.I LED indicano la versione HDCP utilizzati su sorgente e
schermo: LED Rosso v.1.4, LED Blu v.2.2, nessun LED acceso indica che non è
presente codifica HDCP sulla sorgente.
CE/FCC Statement
CE Certification
This equipment complies with the requirements of the European Union.
It has been manufactured under the scope of RoHS compliance.
CE Konformitätserklärung
Dieses Produkt entspricht den einschlägigen Richtlinien der EU.
Diese Geräte wurden unter Berücksichtigung der RoHS Vorgaben hergestellt.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
LINDY Herstellergarantie Hinweis für Kunden in Deutschland
LINDY gewährt für dieses Produkt über die gesetzliche Regelung in Deutschland hinaus
eine zweijährige Herstellergarantie ab Kaufdatum. Die detaillierten Bedingungen dieser
Garantie finden Sie auf der LINDY Website aufgelistet bei den AGBs.
Hersteller / Manufacturer (EU):.
LINDY-Elektronik GmbH LINDY Electronics Ltd
Markircher Str. 20 Sadler Forster Way
68229 Mannheim Stockton-on-Tees, TS17 9JY
GERMANY United Kingdom
Email: info@lindy.com , [email protected].uk ,
T: +49 (0)621 470050 T: +44 (0)1642 754000
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
Europe, United Kingdom
WEEE regulation for the collection and recycling of all waste electrical and electronic
equipment. It is no longer allowable to simply throw away electrical and electronic
equipment. Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national
law in slightly different ways. Please follow your national law when you want to dispose of
any electrical or electronic products. More details can be obtained from your national
WEEE recycling agency.
Germany / Deutschland Rücknahme Elektroschrott und Batterie-Entsorgung
Die EU WEEE Direktive wurde im ElektroG in deutsches Recht umgesetzt. Das Entsorgen
von Elektro- und Elektronikgeräten über die Hausmülltonne ist verboten! Diese Geräte
müssen den Sammel- und Rückgabesystemen zugeführt werden! Dort werden sie
kostenlos entgegen genommen. Die Kosten für den weiteren Recyclingprozess
übernehmen die Gerätehersteller. LINDY bietet deutschen Endverbrauchern ein
kostenloses Rücknahmesystem an, beachten Sie bitte, dass Batterien und Akkus vor der
Rückgabe an das Rücknahmesystem entnommen werden müssen und über die Sammel-
und Rückgabesysteme für Batterien separat entsorgt werden müssen. Ausführliche
Informationen finden Sie stets aktuell auf der LINDY Webseite.
France
En 2006, l'union Européenne a introduit la nouvelle réglementation (DEEE) pour le
recyclage de tout équipement électrique et électronique. Chaque Etat membre de l’ Union
Européenne a mis en application la nouvelle réglementation DEEE de manières
légèrement différentes. Veuillez suivre le décret d’application correspondant à
l’élimination des déchets électriques ou électroniques de votre pays.
Italy
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il
riciclo di apparecchi elettrici ed elettronici. Non è più consentito semplicemente gettare
queste apparecchiature, devono essere riciclate. Ogni stato membro dell’ EU ha
tramutato le direttive WEEE in leggi statali in varie misure. Fare riferimento alle leggi del
proprio Stato quando si dispone di un apparecchio elettrico o elettronico.
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.
LINDY No 38166
3rd Edition, June 2018
lindy.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Lindy Bidirectional HDCP Converter, v2.2 and v1.4 Manuale utente

Tipo
Manuale utente