Philips 25PT4323/69R Manuale utente

Categoria
TV CRT
Tipo
Manuale utente
Operating Instructions
25PT4323
25PT432325PT4323
Colour television
1-4_25PT4323/E 06/05/03, 5:10 PM1
2
Recycling Directive – To minimise harm to the environment, the batteries supplied
with the TV set do not contain mercury or nickel cadmium. If possible, when
disposing of batteries, use recycling means available to you. Your TV set uses materials which
are reusable or which can be recycled. To minimise the amount of waste in the environment,
specialist companies recover used sets for dismantling and collection of reusable materials
(contact your dealer).
TABLE OF CONTENTS
Introduction
Safety Information/Useful Tips .................................................................................................. 3
Before Calling Service ................................................................................................................. 4
Basic Installation/Functions
Hooking Up Your TV (Basic Connection) ............................................................................... 5
Use/Care of remote Control .................................................................................................... 5
Connecting the Audio/Video Sockets (Playback) .................................................................. 6
Connecting the Audio/Video Sockets (Recording) ............................................................... 8
Functions of Remote Control ................................................................................................... 9
Functions of TV Controls ...........................................................................................................11
TV Installation
Selecting the Menu Language...................................................................................................... 12
Automatic Tuning of Channels .................................................................................................. 13
Manual Tuning of Channels ......................................................................................................... 14
Selecting the Colour/Sound System ........................................................................................ 16
Fine Tuning Of Channels ............................................................................................................. 17
Editing of Channels........................................................................................................................18
Features
Adjusting the TV Picture ............................................................................................................. 19
Adjusting the TV Sound ...............................................................................................................20
Using the Screen Format ............................................................................................................ 21
Activating the Signal Strength .................................................................................................... 22
Using the Active Control ............................................................................................................ 23
Smart Picture Control .................................................................................................................24
Smart Sound Control....................................................................................................................25
Personal Zapping ...........................................................................................................................26
Teletext ........................................................................................................................................... 27
General
Specifications...................................................................................................................................29
1-4_21PT4323/E 06/05/03, 11:07 AM2
3
SAFETY INFORMATION AND USEFUL T IPS
Safety Information
Disconnect mains plug when :
the red light below the TV screen is flashing continuously.
–a bright white line is displayed across the screen.
cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois
leather or soft cloth.
there is a lightning storm.
the set is left unattended for a prolonged period of time.
No naked flame sources, such as lighted candles, should be placed on top of the TV or
in the vicinity.
Do not place your TV set under direct sunlight or heat.
Leave at least 5 cm around each side of TV set to allow for proper ventilation.
Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain
or water.
No objects filled with liquids should be placed on top the TV so as to avoid dripping
or splashing of liquids on the set.
Useful Tips
Do not leave your set on standby mode for a prolonged period of time. Switch off set
to allow it to be demagnetised. A demagnetised set supports good picture quality.
Do not shift or move the set around when it is switched on. Uneveness in colour in
some parts of the screen may occur.
•Never attempt to repair a defective TV yourself. Always consult a skilled service
personnel.
1-4/E 01/15/03, 4:59 PM3
4
BEFORE CALLING SERVICE
Below is a list of frequently occurred symptoms. Before you call for service, make these simple
checks. Some of these symptoms can easily be rectified if you know what to do.
Symptom What you should do
Colour patch Switch off the TV by the mains power button. Wait for 20
(uneveness) minutes before switching on again.
Check the TV is not placed too near speakers or magnetic
objects.
No power Check the TV’s AC power cord is plugged into the mains
socket. If there is still no power, disconnect plug. Wait for
60 seconds and re-insert plug. Switch on the TV again.
No picture Check the antenna connection at the rear of the TV.
•Possible TV station problem. Try another channel.
Good picture Try increasing the volume.
but no sound Check that the sound is not muted. If it is muted, press the
Mute button on the remote control to restore sound.
Good sound but poor Try increasing the contrast and brightness setting.
colour or no picture
Snowish picture and Check antenna connection at the rear of the TV.
noise
Horizontal dotted lines Possible electrical interference e.g. hairdryer, vacuum
cleaner, etc. Switch off appliances.
Double images or Possible poor positioning of antenna. Using a highly
“Ghost” images directional antenna may improve reception.
TV not responding to Check life span of batteries of remote control handset.
remote control handset Aim remote control handset directly at remote control
sensor lens on the TV.
1-4/E 01/15/03, 4:59 PM4
5
Antenna Connection
Connect the aerial plug to the antenna socket
¬¬
¬¬
¬
on the backcover.
Insert the mains plug into the wall socket.
Mains Connection
•For correct mains voltage, refer to type sticker at
the rear of the TV set
Consult your dealer if mains supply is different.
Note : This diagram is not representative of the
actual plug and socket.
Switching on the Set
•Press the main power button to switch on/
off the TV.
If the set is on standby (indicator is red),
press the Power button on the remote
control to switch on set.
HOOKING UP Y OUR TV (BASIC CONNECTION)
USE/CARE OF REMOTE CONTROL
Insert the correct type of batteries into the
compartment.
Ensure the batteries are placed in the right
direction.
5-11_25PT4323/E 06/05/03, 5:14 PM5
6
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO
and VIDEO INPUT sockets on the rear of the TV.
Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and
VIDEO OUT sockets on the VCR.
The S-Video connection on the rear of the TV is used for the playback of S-VHS VCR tapes, Video Discs,
Video Games or Compact Disc-Interactive (cd-i) discs. Better picture detail and clarity is possible with
the S-Video playback as compared to the picture from a normal antenna (RF) connection.
Connect the S-VIDEO socket on the rear of the TV to the S-VHS OUT socket on a
S-VHS VCR.
Connect the AUDIO IN sockets from the rear of the TV to the AUDIO OUT sockets
on the VCR. Note : You need not connect the VIDEO IN socket of the TV if S-VIDEO IN
socket is connected.
CONNECTING THE A UDIO/VIDEO SOCKETS (PLAYBACK)
ANTENNA
OUT
IN
OUT
IN
AUDIO
R
L
VIDEO
IN
OUT
L/Mono
R
S-VIDEO
VIDEO
AUDIO
AV1 in AV2 inMonitor out
COMPONENT VIDEO INPUT
Y
Pb
Pr
ANTENNA
OUT
IN
OUT
IN
AUDIO
R
L
VIDEO
IN
OUT
OUT
S-VIDEO
L/Mono
R
S-VIDEO
VIDEO
AUDIO
AV1 in AV2 inMonitor out
COMPONENT VIDEO INPUT
Y
Pb
Pr
AV sockets on
the rear of TV
Back of VCR
VCR (equipped with Video and
Audio output sockets)
AV sockets on
the rear of TV
Back of S-VHS VCR
5-11/E 01/15/03, 5:00 PM6
7
CONNECTING THE A UDIO/VIDEO SOCKETS (PLACKBACK)
You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT sockets on the
rear of the TV.
Connect the “Y”, “Pb” and the “Pr” INPUT sockets on the TV to the “Y”, “Pb” and
“Pr” OUTPUT sockets on the DVD to view playback of DVD discs.
(for certain versions only)
For more convenient direct playback connections, the Side Audio/Video Input sockets allow for quick
and easy connections, particularly Camcorder tape recordings.
Connect the VIDEO socket from the Camcorder to the Side VIDEO in socket of the TV.
Connect the AUDIO OUT sockets (Right and Left) from the Camcorder to the Side
AUDIO IN sockets.
AV sockets on rear of TV
Back of DVD
DVD (Equipped with “Y”,
“Pb” and “Pr” and Output
sockets)
OUT
AUDIO
Y
L
OUT
R
Pb
Pr
L/Mono
R
S-VIDEO
VIDEO
AUDIO
AV1 in AV2 inMonitor out
COMPONENT VIDEO INPUT
Y
Pb
Pr
Connect headphone jack to
socket for personal listening
Camcorder
5-11_25PT4323/E 07/11/03, 10:00 AM7
8
CONNECTING THE A UDIO/VIDEO SOCKETS (RECORDING)
Connection for recording from the TV channel
Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUT
sockets on the rear of the TV.
–To enhance the sound of your TV, connect the AUDIO L and R sockets to an external audio
system instead of the VCR. For mono equipment, connect only the AUDIO L socket.
Connection for recording from one VCR to another VCR
Connect the sockets of the VCR which you wish to record from, to the corresponding
sockets at either AV1 or AV2
Connect the sockets of the receiving VCR to the MONITOR OUTPUT sockets on the
rear of the TV.
ANTENNA
OUT
IN
OUT
IN
AUDIO
R
L
VIDEO
IN
OUT
L/Mono
R
S-VIDEO
VIDEO
AUDIO
AV1 in AV2 inMonitor out
COMPONENT VIDEO INPUT
Y
Pb
Pr
ANTENNA
OUT
IN
OUT
IN
AUDIO
R
L
VIDEO
IN
OUT
ANTENNA
OUT
IN
OUT
AUDIO
R
L
VIDEO
OUT
L/Mono
R
S-VIDEO
VIDEO
AUDIO
AV1 in AV2 inMonitor out
COMPONENT VIDEO INPUT
Y
Pb
Pr
AV sockets on
the rear of TV
VCR (equipped with Video and
Audio input sockets)
AV sockets on
the rear of TV
VCR (equipped with Video and
Audio input sockets)
VCR 1
VCR 2
Back of VCR
5-11/E 01/15/03, 5:00 PM8
9
& Power button
Switch set off temporarily to standby mode.
(The red light indicator lights up when the set
is on standby mode).
–To switch on set from standby mode, press
Channel +/– , Digit (0 -9) or Power button.
é Teletext Colour/Personal Zapping buttons
In teletext mode, the colour buttons allow you to
access directly an item or corresponding pages.
As Personal Zapping buttons, you can surf up to
10 personal channels for each button. For detailed
description of functions, refer to section on
“Personal Zapping ”.
Teletext buttons
Allows you to access teletext information. For
detailed description of functions, refer to section
on “Using the Teletext”
Smiley button
Allows to add and store your personal preference
channels in your Personal Preference list. For detailed
description of functions, refer to section on “Using your
Personal Zapping feature”.
( Timer Button
Not applicable.
§ Smart Sound Button
Press the Smart Sound button repeatedly to access 4
different types of sound settings and choose your desired
setting.
è Menu Button
Displays the main menu. Also exits menu from screen.
! Cursor Up Button
Allows you to select the next item on the menu.
ç Cursor Left Button
Allows you to select the sub-menus and adjust the settings.
0 Volume + / – Button
Increases or decreases volume.
1
44
44
4
Allows you to switch from Stereo to Mono sound during
stereo transmission or to choose between language5or
language6during dual sound transmission.
2 A/CH(Alternate channel) Button
Allows you to change between the current
channel and the previous channel.
FUNCTIONS OF REMOTE CONTROL
&
(
§
ç
0
1
é
2
!
è
5-11_34PT4323/E 04/10/03, 5:33 PM9
10
FUNCTIONS OF REMOTE CONTROL
3 Main Index Button
In teletext mode, press button to return to the
main index page.
4 Frownie button
Allows to delete stored personal preference
channels in your Personal Preference list. For
detailed description of functions, refer to section on
“Personal Zapping ”.
5 Smart Picture Button
Press the Smart Picture button repeatedly to access
5 different types of picture settings and choose
your desired setting.
61Incredible Surround Button
Allows you to select Incredible Surround sound when
transmission is in stereo mode.
Allows you to select Spatial Sound when transmission
is in mono mode.
71Cursor Right Button
Allows you to access the sub-menus and adjust the
settings.
8 Cursor Down Button
Allows you to select the next item on the menu.
9 Channel + / – Buttons
Allows you to select channels in ascending or
descending order.
20
Mute Button
Mutes sound. To restore sound, press button again.
21
Teletext Button
Refer to section on “Using the Teletext”
22
OSD button
Allows you to display the current channel number.
It also allows to exit menu from the screen after
control adjustments.
23
Digit (0 -9) Buttons
Press to select a channel. For a 2-digit channel
number, press the first digit and followed
immediately by the second digit.
24
A/V Button
Allows you to select the AV channels.
25
Sleeptimer Button
Allows you to select a time period after which the
set will switch to standby mode automatically.
3
4
5
6
7
8
9
21
20
22
23
24
25
5-11_34PT4323/E 03/04/03, 5:34 PM10
11
FUNCTIONS OF TV CONTROLS
3
INSTALL MENU
VOLUME
+
7 CHANNEL 6
& Mains Power button Switch mains power on or off.
é Standby light indicator Indicate red light when standby mode is activated.
Remote Sensor Acts as a sensor for activating the controls of the
TV when remote control handset is aimed at it.
Volume + / buttons Adjust sound volume softer/louder.
( Channel 7 / 6 buttons Select channel in descending/ascending order.
Note
•You can enter the main menu by pressing both the Volume- and+buttons at the
same time.
•Press the Channel 7 or 6 button to select the next item on the menu.
•Press Volume-or+button to access sub-menu and adjust the settings.
&
é
‘(
5-11_25PT4323/E 06/05/03, 5:14 PM11
12
¸
Operating instructions generally explains the operation of the TV
set using the buttons on the remote control unless otherwise stated.
Please read the following instructions carefully and follow the steps
as shown to familiarise yourself with the installations and all features
available in your set.
Note: When there is no signal input to the TV, you may encounter instability of the
on screen display. In this instance, please use the v button on your remote
control to select an AV channel.
The Language feature allows you to set the TV’s on-screen menu to be shown in your
desired language.
SELECTING THE MENU LANGUAGE
Enter main menu.
Select Install.
Enter the Install menu.
Press button repeatedly to cycle
through the language list and
select the language of your choice.
Exit menu from screen.
Main o
Picture π Brightness
Sound Colour
Features Contrast
Install Sharpness
Colour Temp.
More...
œ
Main o
Picture Language
Sound Auto Store
Features Manual Store
Install π Channel Edit
œ
Install o
Language English π
Auto Store
Manual store
Channel Edit
œ
˙
MENU
m
˙
Step Press button Result on screen
12-18/E 01/15/03, 5:00 PM12
13
AUTOMATIC T UNING OF CHANNELS
Automatic tuning of channels allows you to store each programme automatically.
Enter main menu.
Press button repeatedly until
Install is selected.
Enter install menu.
Select Auto Store.
Start automatic tuning of
channels.
When tuning is completed,
exit menu from screen.
¸
Main o
Picture π Brightness
Sound Colour
Features Contrast
Install Sharpness
Colour Temp.
More...
œ
Main o
Picture Language
Sound Auto Store
Features Manual Store
Install π Channel Edit
œ
Install o
Language π English
Auto Store
Manual store
Channel Edit
œ
˙
¸
Install o
Language
Auto Store π
Manual store
Channel Edit
œ
˙
Auto Store
Channel 1
TV 142 MHz
♦♦♦♦♦♦♦♦♦♦♦♦♦♦π♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
Install o
Language
Auto Store π
Manual store
Channel Edit
œ
MENU
Step Press button Result on screen
12-18_25PT4323/E 07/11/03, 10:02 AM13
14
MANUAL T UNING OF CHANNELS
Manual tuning of channels allows you to select your preferred channel number for every
available programme.
MENU
¸
˙
¸
˙
Enter main menu.
Press button repeatedly until
Install is selected.
Enter install menu.
Press button repeatedly until
Manual Store is selected.
Enter manual store menu.
Press button repeatedly until
Search is selected.
MANUAL T UNING OF
Main o
Picture π Brightness
Sound Colour
Features Contrast
Install Sharpness
Colour Temp.
More...
œ
Main o
Picture Language
Sound Auto Store
Features Manual Store
Install π Channel Edit
œ
Install o
Language π English
Auto Store
Manual Store
Channel Edit
œ
Install o
Language Colour System
Auto Store Sound System
Manual Store π Search
Channel Edit Channel
Fine Tune
Store
œ
Manual Store o
Colour System
Sound System
Search 79 MHz π
Channel
Fine Tune
Store
œ
¸
Step Press button Result on screen
12-18/E 01/15/03, 5:00 PM14
15
CHANNELSMANUAL T UNING OF CHANNELS
¸
Manual Store o
Colour System
Sound System
Search
Channel 2 π
Fine Tune
Store
œ
Manual Storeo
Colour System
Sound System
Search
Channel
Fine Tune
Store Store?π
œ
˙
¸
9
10
11
Manual Storeo
Colour System
Sound System
Search
Channel
Fine Tune
Store Stored
œ
12
˙
Start manual searching. Searching
stops once a transmitting signal is
found.
Select Channel.
Key in the channel number.
Press button repeatedly until
Store is selected.
Store tuned channel.
Note : If you want to
continue searching for
another transmitting
channel, repeat steps
7 to 11.
Exit menu from screen.
Manual Store o
Colour System
Sound System
Search 128 MHz π
Channel
Fine Tune
Store
œ
5
1
3
2
4
6
7
9
8
0
m
Step Press button Result on screen
12-18/E 01/15/03, 5:00 PM15
16
SELECTING THE COLOUR/SOUND SYSTEM
This feature allows you to select your desired Colour and Sound system. If Auto
is selected, the respective colour and sound system will be automatically selected according
to the transmission system. Note : Select your desired colour and sound system manually if
reception is poor at Auto mode.
Repeat step 1 Colour System is selected.
to step 5 as in
“Manual Tuning
of TV Channels”
Select the desired colour
system (Auto, PA L ,
NTSC 3.58, NTSC 4.43
or SECAM).
Press button repeatedly
until STORE is selected.
Store selected system.
Proceed to select Sound
System.
Select the desired sound
system (Auto, BG, I,
DK or M.
Press button repeatedly
until STORE is selected.
Store selected system.
Exit menu from screen.
Manual Store o
Colour System Auto π
Sound System
Search
Channel
Fine Tune
Store
œ
Manual Store o
Colour System PAL π
Sound System
Search
Channel
Fine Tune
Store
œ
˝
˙
or
¸
˙
˝
Manual Store o
Colour System
Sound System
Search
Channel
Fine Tune
Store Stored
œ
9
¸
˙
Manual Store o
Colour System
Sound System Auto π
Search
Channel
Fine Tune
Store
œ
Manual Store o
Colour System
Sound System DK π
Search
Channel
Fine Tune
Store
œ
or
¸
˙
m
Manual Store o
Colour System
Sound System
Search
Channel
Fine Tune
Store Stored
œ
10
11
12
or
˚
Step Press button Result on screen
12-18/E 01/15/03, 5:00 PM16
17
FINE TUNING OF CHANNELS
This feature allows you to adjust picture reception in areas of weak reception.
Enter main menu.
Press button repeatedly until
Install is selected.
Enter install menu.
Press button repeatedly until
Manual Store is selected.
Enter manual store menu.
Press button repeatedly until
Fine Tune is selected.
Fine tune until the best reception
is obtained.
Select Store.
Store last fine-tuned status.
Exit menu from screen.
Main o
Picture π Brightness
Sound Color
Features Contrast
Install Sharpness
Colour Temp.
More...
œ
Main o
Picture Language
Sound Auto Store
Features Manual Store
Install π Channel edit
œ
¸
˙
¸
˙
¸
˙
¸
˙
9
Install o
Language Colour System
Auto Store Sound System
Manual Store π Search
Channel Edit Channel
Fine Tune
Store
œ
Manual Storeo
Colour System
Sound System
Search
Channel
Fine Tune
p
❘❘❘❘❘❘❘❘❘❘❘
❘❘
❘❘❘❘❘❘❘❘❘❘❘
π
Store
œ
Manual Storeo
Colour System
Sound System
Search
Channel
Fine Tune
p
❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘
❘❘
❘❘❘❘
π
Store
œ
Manual Storeo
Colour System
Sound System
Search
Channel
Fine Tune
Store Stored
œ
10
MENU
or
˝
Step Press button Result on screen
12-18_29/34PT4323/E 05/13/03, 3:13 PM17
18
EDITING OF CHANNELS
This feature allows you to skip or edit channels which have bad or weak TV signal or channels
that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by
the CH (Channel) + or – button. You can only have access to the channel by the Digit (0 -9)
buttons.
Main o
Picture Language
Sound Auto Store
Features Manual Store
Install π Channel Edit
œ
Install o
Language Channel
Auto Store Skipped
Manual Store
Channel Edit π
œ
Enter main menu.
Press button repeatedly until
Install is selected.
Enter install menu.
Press button repeatedly until
Channel Edit is selected.
Enter Channel Edit menu.
Key in the channel number to be
skipped.
Select Skipped.
Select On to skip channel.
Exit menu from screen.
Channel Edit o
Channel 2 π
Skipped
œ
9
HOW TO RESTORE SKIPPED CHANNELS
Repeat Steps 1 to 5 as in”Editing of Channels”.
•Key in the channel number to be restored by the
Digit (0 - 9) button.
Select Skipped by the
¸
button.
Select Off to restore channel by the
˙
button.
Exit menu from screen by the
button.
Channel Edit o
Channel
Skipped Off
œ
MENU
5
1
3
2
4
6
7
9
8
0
¸
˙
¸
˙
¸
˙
Step Press button Result on screen
Channel Edit o
Channel
Skipped On
œ
12-18_29/34PT4323/E 05/13/03, 3:13 PM18
19
¸
ADJUSTING THE TV PICTURE
The picture menu allows you to make adjustments to the picture.
Main o
Picture π Brightness
Sound Colour
Features Contrast
Install Sharpness
Colour Temp
More...
œ
Picture o
Brightnessp
❘❘❘❘❘❘❘❘❘❘❘
❘❘❘❘❘❘❘❘❘❘❘
59π
Colour
Contrast
Sharpness
Colour Temp
NR
œ
˙
Display the main menu on screen.
Enter Picture menu.
Select item.
Adjust level or select desired
setting.
Exit menu from screen.
˝
˙
or
Picture menu items Activities
Brightness Increase or decrease brightness level.
Colour Increase or decrease color level.
Contrast Increase or decrease contrast level.
Sharpness Increase or decrease sharpness level to improve detail
in picture.
Colour temperature Choose from 3 settings (Normal, Warm or Cool).
NR (Noise Reduction) Select On” to reduce “noisy” picture (little dots on
picture) due to weak signal.
Contrast + Select On” to allow you to optimise the total contrast
for improved picture quality.
˚
or
MENU
m
Picture o
Colour p
❘❘❘❘❘❘❘❘❘❘❘
❘❘❘❘❘❘❘❘❘❘❘
59π
Contrast
Sharpness
Colour Temp
NR
Contrast +
œ
Step Press button Result on screen
19-20/E 01/15/03, 5:01 PM19
20
ADJUSTING THE TV SOUND
The sound menu allows you to make adjustments to the sound.
Display the main menu on screen.
Select Sound menu.
Enter Sound menu.
Select item.
Adjust level or select desired
setting.
Exit menu from screen.
Main o
Picture π Brightness
Sound Colour
Features Contrast
Install Sharpness
Colour Temp.
More...
œ
Main o
Picture Treble
Sound π Bass
Features Balance
Install AVL
Incr. Surround
Ultra Bass
œ
Sound o
Treble p
❘❘❘❘❘❘❘❘❘❘❘
❘❘❘❘❘❘❘❘❘❘❘
0π
Bass
Balance
AVL
Incr. Surround
Ultra Bass
œ
¸
˙
˝
˙
or
˚
or
¸
Sound menu items Activities
Treble Increase or decrease high frequency level.
Bass Increase or decrease low frequency level.
Balance Increase or decrease to adjust balance level.
AVL (Auto Volume Leveller) Select On to enable volume to remain at a pre-
determined level should there be a sudden change in
volume during commercial breaks or channel switching.
Incredible Surround Select On to boost the effect of stereo sound.
Ultra Bass Select On to enjoy enhanced bass output.
MENU
m
Step Press button Result on screen
19-20/E 01/15/03, 5:01 PM20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Philips 25PT4323/69R Manuale utente

Categoria
TV CRT
Tipo
Manuale utente

in altre lingue