Datalogic QuickScan M2130 Quick Reference Manual

Marca: Datalogic

Modello: QuickScan M2130

Categoria: Lettori di codici a barre

Tipo: Quick Reference Manual

Questo manuale è adatto anche per

QuickScan Mobile

QuickScan™ Mobile

General Purpose Handheld

Linear Imager Bar Code Reader with

Datalogic’s STAR Cordless System™

Quick Reference Guide

Datalogic ADC, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

mentation or the procedures described therein may be reproduced or transmitted

in any form or by any means without prior written permission of Datalogic ADC,

Inc. or its subsidiaries or affiliates ("Datalogic" or "Datalogic ADC"). Owners of Data-

logic products are hereby granted a non-exclusive, revocable license to reproduce

and transmit this documentation for the purchaser's own internal business pur-

poses. Purchaser shall not remove or alter any proprietary notices, including copy-

right notices, contained in this documentation and shall ensure that all notices

appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed ver-

sions by contacting your Datalogic representative. Electronic versions may either

be downloadable from the Datalogic website (www.datalogic.com) or provided on

appropriate media. If you visit our website and would like to make comments or

suggestions about this or other Datalogic publications, please let us know via the

"Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual

that is complete and accurate, however, Datalogic reserves the right to change any

specification at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in

many countries, including the U.S.A. and the E.U. All other brand and product

names may be trademarks of their respective owners.

Patents

This product may be covered by one or more of the following patents:

Utility patents: EP0789315B1; EP0851378B1; EP0895175B1; EP1128314B1;

EP1164536B1; EP1205871B1; EP1205873B1;

EP1942442B1; US5992740; US6305606; US6517003; US6712271; US6834806;

US6871785; USRE41349

Additional patents pending.

Table of Contents

Using Quickscan™ Mobile Reader and Cradle ............................................... 1

Reading Angle ......................................................................................... 2

Hands-Free Use ...................................................................................... 2

Using Your QuickScanTM Mobile Reading System ............................. 3

Installing the Battery ...................................................................................... 3

Changing the Batteries .......................................................................... 5

Connecting the QuickScan Mobile ................................................................. 7

System Connections ............................................................................... 7

QuickScan Mobile Cradle Configuration ..................................................... 10

Serial/USB-COM Configuration ........................................................... 10

QuickScan Mobile Reader Configuration .................................................... 10

Interface Selection ........................................................................................ 12

USB Interface Configuration ................................................................ 12

START-UP ...................................................................................... 12

USB Interface Selection ................................................................................ 13

RS-232 Interface Selection .......................................................................... 14

Wedge Interface Selection ........................................................................... 15

USB / Wedge Keyboard Nationality .................................................... 18

IBM46xx Interface Selection ....................................................................... 19

Pen Interface Selection ........................................................................ 20

Operating Test ............................................................................................... 21

Reader Default Configuration ...................................................................... 22

Cradle Default Configuration ....................................................................... 23

Technical Features ........................................................................................ 24

Compliance .................................................................................................... 26

Power Supply ......................................................................................... 26

FCC Compliance ..................................................................................... 26

LED Class ............................................................................................... 27

Radio Compliance ................................................................................. 27

WEEE Statement .................................................................................. 30

Datalogic ADC Limited Factory Warranty ................................................... 31

Ergonomic Recommendations .................................................................... 32

Services and Support .................................................................................... 33

Products......................................................................................... 33

Service & Support ......................................................................... 33

NOTES

Quick Reference Guide

Using Quickscan™ Mobile Reader and Cradle

The QuickScan

Mobile reader and cradle build a Cordless Reading System for

the collection, decoding and transmission of barcode data.

Standard models can be connected to a Host PC through a USB, RS-232,

Wedge or Pen emulation cable. All models are suited for single-cradle

layouts.

The LEDs signal the QuickScan Mobile cradle status, as described in the

following table:

LED BEEPER STATUS

Power on /

Data

Yellow On = QuickScan

Mobile cradle is powered.

Yellow Blinking = the cradle receives data and com-

mands from the Host or the reader.

Charging - Red On = the battery charge is in progress.

Charge com-

pleted

- Green On = the battery is completely charged.

Alternating

red/green

Repetitive

beep

Charging out of temperature range, over-current or

over-voltage conditions

Charge completed

(green LED)

Charging (red LED)

Power on / Data

(yellow LED)

2 QuickScan™ Mobile

Reading Angle

QuickScan

Mobile readers automatically scan barcodes at a distance.

Simply aim and pull the trigger. Code scanning is performed along the center

of the light bar emitted from the reading window. This bar must cover the

entire code.

Successful scanning is obtained by tilting the reader with respect to the

barcode to avoid direct reflections, which could impair the reading

performance. See the figures below.

Successful reading is indicated by an audible tone.

OK Not Recommended

Hands-Free Use

When using the QuickScan Mobile on the cradle, remember to lock the reader

by pushing up the locking system as indicated in the following figure.

Good read LED

Installing the Battery

Quick Reference Guide 3

Using Your QuickScan

Mobile Reading System

Follow the procedure below to start using your QuickScan Mobile reading

system:

1. Connect a QuickScan Mobile cradle to the Host. For installation and

connection information see "System Connections" on page 7.

2. Insert the QuickScan Mobile reader into the cradle to start the battery

charging.

A full charge of the Lithium battery takes 3.5 – 6 hours.

For hands-free use, you can immediately begin using the reader, since

it is powered by the cradle.

3. Configure the QuickScan Mobile reader.

4. Configure the QuickScan Mobile cradle. Reference "QuickScan Mobile

Cradle Configuration" on page 10.

Installing the Battery

To install, charge and/or do any other action on the battery, follow the

instructions in this manual.

Battery Safety

To achieve the best battery life, it is recommended to perform a

full battery charge before using the reader in handheld mode.

Datalogic recommends annual replacement of rechargeable bat-

tery packs to ensure maximum performance.

WARNING

Do not discharge the battery using any device except the scanner.

When the battery is used in devices other than the designated

product, it may damage the battery or reduce its life expectancy. If

the device causes an abnormal current to flow, it may cause the

battery to become hot, explode or ignite and cause serious injury.

Lithium-ion battery packs may get hot, explode or ignite and

cause serious injury if exposed to abusive conditions. Be sure to

follow the safety warnings that follow:

• Do not place the battery pack in fire or heat.

• Do not connect the positive terminal and negative terminal of the

battery pack to each other with any metal object (such as wire).

• Do not carry or store the battery pack together with metal objects.

Installing the Battery

4 QuickScan™ Mobile

As with other types of batteries, Lithium-Ion (LI) batteries will lose capacity

over time. Capacity deterioration is noticeable after one year of service

whether the battery is in use or not. It is difficult to precisely predict the finite

life of a LI battery, but cell manufacturers rate them at 500 charge cycles. In

other words, the batteries should be expected to take 500 full discharge /

charge cycles before needing replacement. This number is higher if partial

discharging / recharging is adhered to rather than full / deep discharging.

WARNING

• Do not pierce the battery pack with nails, strike it with a hammer,

step on it or otherwise subject it to strong impacts or shocks.

• Do not solder directly onto the battery pack.

• Do not expose the battery pack to liquids, or allow the battery to get

wet.

• Do not apply voltages to the battery pack contacts.

In the event the battery pack leaks and the fluid gets into your

eye, do not rub the eye. Rinse well with water and immediately

seek medical care. If left untreated, the battery fluid could cause

damage to the eye.

CAUTION

Always charge the battery at 32° – 113°F (0° - 45°C) temperature

range.

Use only the authorized power supplies, battery pack, chargers,

and docks supplied by your Datalogic reseller. The use of any

other power supplies can damage the device and void your war-

ranty.

Do not disassemble or modify the battery. The battery contains

safety and protection devices, which, if damaged, may cause the

battery to generate heat, explode or ignite.

Do not place the battery in or near fire, on stoves or other high

temperature locations.

Do not place the battery in direct sunlight, or use or store the bat-

tery inside cars in hot weather. Doing so may cause the battery to

generate heat, explode or ignite. Using the battery in this manner

may also result in a loss of performance and a shortened life

expectancy.

Do not place the battery in microwave ovens, high-pressure con-

tainers or on induction cookware.

Immediately discontinue use of the battery if, while using,

charging or storing the battery, the battery emits an unusual

smell, feels hot, changes color or shape, or appears abnormal in

any other way.

CAUTION

Do not replace the battery pack when the device is turned on.

Do not remove or damage the battery pack’s label.

Do not use the battery pack if it is damaged in any part. Battery

pack usage by children should be supervised.

Installing the Battery

Quick Reference Guide 5

The typical manufacturer advertised useful life of LI batteries is one to three

years, depending on usage and number of charges, etc., after which they

should be removed from service, especially in mission critical applications. Do

not continue to use a battery that is showing excessive loss of capacity, it

should be properly recycled / disposed of and replaced. For most applications,

batteries should be replaced after one year of service to maintain customer

satisfaction and minimize safety concerns.

Collect and recycle waste batteries separately from the device in comply with

European Directive 2006/66/EC, 2011/65/EU, 2002/96/EC and 2012/19/EU

and

subsequent modifications, US and China regulatory and others laws and

regulations about the environment.

Changing the Batteries

To change the battery of your reader, you must:

1. Unscrew the battery cover screw (Figure 1-A)

2. Unplug the white connector and remove the old battery (Figure 1-B)

3. Insert the new battery and plug in the white connector (Figure 1-C)

Figure 1. Changing the Battery

When inserting the new battery into the handle be sure to posi-

tion the battery and the connector as shown below.

Installing the Battery

6 QuickScan™ Mobile

4. Re-insert the cover in the handle, and replace the screw to secure it.

Do not incinerate, disassemble, short terminals or expose to

high temperature. Risk of fire, explosion. Use specified charger

only. Risk of explosion if the battery is replaced by an incorrect

type. Dispose of the batteries as required by the relevant laws

in force.

WARNING

Connecting the QuickScan Mobile

Quick Reference Guide 7

Connecting the QuickScan Mobile

You can connect the QuickScan

Mobile cradle to the Host through the

dedicated connector, using the cable corresponding to the desired interface

type.

1. Connect the appropriate interface cable to the cradle by simply plugging

it into the Host connector on the base of the cradle.

Figure 2. QuickScan Mobile Cradle - Bottom View

2. To disconnect the cable, insert a paper clip or other similar object into

the hole corresponding to the connector on the base of the cradle. Push

down on the clip while unplugging the cable. Refer to the following fig-

ure.

Figure 3. Disconnecting the cable

System Connections

RS-232

CAUTION

Connections should always be made with power off!

Connecting the QuickScan Mobile

8 QuickScan™ Mobile

USB

IBM USB POS

WEDGE (Only for Quickscan M2 type:130)

WEDGE (Only for QUICKSCAN M2 TYPE:130)

Connecting the QuickScan Mobile

Quick Reference Guide 9

PEN

IBM PORT9B / IBM Port 5B (Only for QUICKSCAN M2 TYPE:110)

CAB-445

CAB-446

QuickScan Mobile Cradle Configuration

10 QuickScan™ Mobile

QuickScan Mobile Cradle Configuration

The QuickScan Mobile cradle configuration can be performed in two ways:

either by sending configuration strings from the Host via the RS-232 or

USB-COM interface or by reading configuration barcodes with the reader.

Serial/USB-COM Configuration

By connecting the QuickScan Mobile cradle to a PC through an RS-232 or USB

cable (only USB-COM interface) it is possible to send configuration strings

from the PC to the reader. Using this method you can also send new

configuration strings from the PC to the reader or upgrade application

software onto the reader.

QuickScan Mobile Reader Configuration

When the QuickScan Mobile cradle is connected and powered, configure the

QuickScan

Mobile reader by reading the following codes in the given sequence

and follow the instructions.

For the numeric code selection of step 3, use the table at the end

of this Quick Reference Guide.

Restore QuickScan Mobile default

Ì$+$*oÎ

Enter configuration

Ì$+;Î

Set Radio Address

ÌRF8Î

four digits for the QuickScan Mobile Address

(from 0000 to 1999).

All readers used in the same area must have different addresses.

Exit and Save configuration

Ì$-?Î

QuickScan Mobile Reader Configuration

Quick Reference Guide 11

YOUR READER IS NOW READY TO READ CODES.

Read the Bind code to pair the QuickScan

Mobile reader to the

cradle.

The reader is dedicated to the cradle. Any previously bound reader will

be excluded.

Bind

Ì$+RN0$-IÎ

The green LED on the QuickScan Mobile reader will blink: the reader is

ready to be positioned onto the cradle.

6. Firmly position the reader onto the cradle within 10 seconds, a beep

will be emitted, signaling that the QuickScan Mobile cradle has been

paired to the QuickScan Mobile reader.

7. Now you can configure the QuickScan Mobile cradle by reading

configuration barcodes.

Interface Selection

12 QuickScan™ Mobile

Interface Selection

Follow the procedure to configure the interface required by your application.

Multi-standard interface models:

·USB Interface

· RS-232 Interface

·Wedge Interface

·Pen Interface

USB Interface Configuration

The USB interface is compatible with:

- Windows 98 (and later)

- Mac SO 8.0 (and later)

- 4690 Operating System

START-UP

As with all USB devices, upon connection, the Host performs several checks

by communicating with the cradle. Before the cradle is ready, the correct USB

driver must be loaded.

For all systems, the correct USB driver for the default USB-KBD interface is

included in the Host Operating System and will either be loaded automatically

or will be suggested by the O.S. and should therefore be selected from the

dialog box (the first time only).

You can now read codes with the associated QuickScan Mobile reader. At this

point you can read the USB interface configuration code according to your

application. Load drivers from the O.S. (if requested). When configuring the

USB-COM interface, the relevant files and drivers must be installed from the

USB Device Installation software which can be downloaded from the web site:

http://www.datalogic.com

The cradle is ready.

Successive start-ups will automatically recognize the previously loaded

drivers.

Connect cradle to Host

Select desired USB interface code

(USB-KBD is default)

Load drivers

(if requested)

Load drivers

(if requested)

USB Interface Selection

Quick Reference Guide 13

USB Interface Selection

* When configuring USB-COM, the relevant files and drivers must be installed from the

USB Device Installation software, which can be downloaded from the web site http://

www.datalogic.com.

Select one keyboard nationality code from the table at page 18.

USB-KBD (default)

Ì$+UA03$-:Î

USB-KBD-ALT-MODE

Ì$+UA04$-@Î

USB-KBD-APPLE

Ì$+UA05$-FÎ

USB-COM*

Ì$+UA02$-4Î

USB-IBM-Table Top

Ì$+UA00$-(Î

USB-IBM-Hand Held

Ì$+UA01$-.Î

RS-232 Interface Selection

14 QuickScan™ Mobile

RS-232 Interface Selection

Read the QuickScan

Mobile cradle restore default code, and then read the

interface selection code for your application:

RESTORE QUICKSCAN MOBILE CRADLE DEFAULT

Ì$+RX0$-qÎ

RS-232 Interface

Standard

Ì$+CP0$-$Î

POS TERMINALS

Nixdorf Mode A

Ì$+CM2EC0$->Î

Fujitsu

Ì$+CM1$-ÈÎ

ICL Mode

Ì$+CM0$-ÃÎ

Wedge Interface Selection

Quick Reference Guide 15

Wedge Interface Selection

Read the QuickScan

Mobile cradle restore default code, then read the

interface selection code for your application:

RESTORE QUICKSCAN MOBILE CRADLE DEFAULT

Ì$+RX0$-qÎ

This feature is only available for Quickscan M2 Type:130

WEDGE INTERFACE

IBM AT or PS/2 PCs

Ì$+CP500$-aÎ

IBM XT

Ì$+CP503$-vÎ

PC Notebook

Ì$+CP505$-ÈÎ

IBM SURE1

Ì$+CP506$-$Î

IBM Terminal 3153

Ì$+CP504$-}Î

Wedge Interface Selection

16 QuickScan™ Mobile

WEDGE INTERFACE (CONTINUED)

IBM Terminals 31xx, 32xx, 34xx, 37xx:

To select the interface for these IBM Terminals, read the correct KEY

TRANSMISSION code. Select the KEYBOARD TYPE if necessary (default =

advanced keyboard).

KEY TRANSMISSION MODE

make-only keyboard

Ì$+CP502$-oÎ

make-break keyboard

Ì$+CP501$-hÎ

KEYBOARD TYPE

advanced keyboard

Ì$+FK1$-ÉÎ

typewriter keyboard

Ì$+FK0$-ÄÎ

ALT MODE

The following interface selection allows barcodes sent to the PC to be

interpreted correctly independently from the Keyboard Nationality used.

You do not need to make a Keyboard Nationality selection.

(default = Num Lock Unchanged)

Make sure the Num Lock key on your keyboard is ON.

IBM AT - ALT mode

Ì$+CP507$-+Î

PC Notebook - ALT mode

Ì$+CP508$-2Î

La pagina sta caricando ...

Datalogic QuickScan M2130 Quick Reference Manual

Marca: Datalogic

Modello: QuickScan M2130

Categoria: Lettori di codici a barre

Tipo: Quick Reference Manual

Questo manuale è adatto anche per

QuickScan Mobile

Scarica il pdf

rapporto

in altre lingue

English: Datalogic QuickScan M2130

Documenti correlati

Altri documenti

Wincor Nixdorf BEETLE /iPOS plus Advanced Skylake Manuale utente