Wincor Nixdorf BEETLE /iPOS plus Advanced Skylake Manuale utente

Marca: Wincor Nixdorf

Modello: BEETLE /iPOS plus Advanced Skylake

Categoria: Terminali POS

Tipo: Manuale utente

iPOS plus Advanced

User Manual

(Edition December 2018)

01750299682 D

Table of Contents

Manufacturer's Certification ..........................................................................................

1-1

1.1

FCC Class-A Declaration..................................................................................................

1-1

1.2

Energy Efficiency ..............................................................................................................

1-1

1.3

Wireless Declaration of Conformity...................................................................................

1-2

1.4

Important Notes ................................................................................................................

1-4

1.5

Safety Notes .....................................................................................................................

1-5

1.6

Supplier's Declaration of Conformity.................................................................................

1-6

Introduction .....................................................................................................................

2-1

2.1

About This Manual ............................................................................................................

2-1

2.2

Care of the iPOS Plus Advanced......................................................................................

2-1

2.3

Recycling the iPOS Plus Advanced ..................................................................................

2-2

2.4

Warranty ...........................................................................................................................

2-2

2.5

Lithium Battery ..................................................................................................................

2-3

2.6

Unpacking & Checking the Delivery Unit ..........................................................................

2-4

Basic Settings .................................................................................................................

3-1

3.1

Highlights ..........................................................................................................................

3-1

3.1.1

Processor Type.................................................................................................................

3-1

3.1.2

RAM ..................................................................................................................................

3-1

3.1.3

Mass Storage Options ......................................................................................................

3-1

3.1.4

Display ..............................................................................................................................

3-2

3.1.5

New Interface Ports ..........................................................................................................

3-2

3.2

Setting Up the Device .......................................................................................................

3-3

3.3

Ergonomic Terminal Workplace........................................................................................

3-3

Overview ..........................................................................................................................

4-1

4.1

Front View with Stand .......................................................................................................

4-1

4.2

Back View with Stand .......................................................................................................

4-2

4.3

AC Power Adapter ............................................................................................................

4-3

4.4

Front Panel .......................................................................................................................

4-4

Projected Capacitive Touch Screen..............................................................................

5-1

5.1

General Information ..........................................................................................................

5-1

5.2

Instructions for Using the Touch Screen...........................................................................

5-1

5.3

Cleaning Instructions ........................................................................................................

5-2

Resistive Touch Screen .................................................................................................

6-1

6.1

General Information ..........................................................................................................

6-1

6.2

Construction of the Resistive Touch Screen.....................................................................

6-1

6.3

Instructions for Using the Touch Screen...........................................................................

6-1

6.4

Cleaning Instructions ........................................................................................................

6-2

Proximity & Ambient Light Sensor................................................................................

7-1

7.1

Operation of the Proximity Sensor ....................................................................................

7-1

7.2

Operation of the Ambient Light Sensor.............................................................................

7-2

RFID/NFC Reader ............................................................................................................

8-1

01750299682 D

Table of Contents

8.1

Operation of the RFID/NFC Reader..................................................................................

8-1

Planning the Installation ................................................................................................

9-1

9.1

Dimensions .......................................................................................................................

9-1

9.2

Desktop version ................................................................................................................

9-1

9.2.1

Desktop Stand Standard...................................................................................................

9-1

9.2.2

Desktop Stand Enhanced .................................................................................................

9-1

9.3

Wall mount version ...........................................................................................................

9-2

9.4

Required operation space.................................................................................................

9-4

9.5

Installation Site Requirement ............................................................................................

9-5

9.5.1

Desktop version ................................................................................................................

9-5

9.5.2

Wall mount version ...........................................................................................................

9-5

Installing to a stand ........................................................................................................

10-1

10.1

Preparing the display ........................................................................................................

10-1

10.2

Preparing the stand...........................................................................................................

10-2

10.3

Installing display to the stand............................................................................................

10-3

Connector Panel .............................................................................................................

11-1

11.1

Connecting Cables............................................................................................................

11-3

11.2

Disconnecting Cables .......................................................................................................

11-4

Storage Media .................................................................................................................

12-1

12.1

Replacement of Hard Disk Drive.......................................................................................

12-1

12.2

Second Hard Disk Drive....................................................................................................

12-2

12.3

Replacement of the RAM..................................................................................................

12-4

Installing Wireless LAN Module ....................................................................................

13-1

Installing System to a Wall.............................................................................................

14-1

14.1

Things you need ...............................................................................................................

14-1

14.2

Mounting height ................................................................................................................

14-2

14.3

Mounting location..............................................................................................................

14-3

14.4

Installation.........................................................................................................................

14-4

14.4.1

Fix wall mount back plate to the wall ................................................................................

14-5

14.4.2

Fix wall mount front plate to the system............................................................................

14-6

14.4.3

Secure the system to the wall ...........................................................................................

14-7

Peripherals .....................................................................................................................

15-1

15.1

Magnetic Swipe Card Reader (MSR) (Optional)...............................................................

15-1

15.1.1

How to operate..................................................................................................................

15-1

15.1.2

Cleaning instructions.........................................................................................................

15-1

15.2

Waiter Lock (Optional) ......................................................................................................

15-1

15.3

Installing the Swipe Card Reader, Waiter Lock ................................................................

15-3

15.4

Lint Filter (Optional) ..........................................................................................................

15-4

15.4.1

Installing Lint Filter ............................................................................................................

15-5

15.4.2

Cleaning and Maintenance ...............................................................................................

15-7

15.4.3

Liability and Warranty .......................................................................................................

15-7

Starting Up the System ..................................................................................................

16-1

01750299682 D

iii

Table of Contents

Error Reporting ...............................................................................................................

17-1

Default BIOS Settings.....................................................................................................

18-1

18.1

Information ........................................................................................................................

18-2

18.2

Main ..................................................................................................................................

18-3

18.3

Advanced ..........................................................................................................................

18-3

18.4

Chipset..............................................................................................................................

18-13

18.5

PC Health..........................................................................................................................

18-17

18.6

Power................................................................................................................................

18-17

18.7

Security .............................................................................................................................

18-17

18.8

Boot...................................................................................................................................

18-19

18.9

Save & Exit .......................................................................................................................

18-21

Technical Data.................................................................................................................

19-1

19.1

AC Power Adapter ............................................................................................................

19-2

19.2

NFC Module......................................................................................................................

19-2

19.3

I/O Hub..............................................................................................................................

19-3

19.4

Total Available Power .......................................................................................................

19-4

Appendix..........................................................................................................................

20-1

20.1

Approved Printers List.......................................................................................................

20-1

Abbreviations ..................................................................................................................

21-1

01750299682 D

1 Manufacturer's Certification

The device complies with the requirements of the EEC directive

2014/30/EU with regard to ‘Electro-magnetic compatibility" and

2014/35/EU “Low Voltage Directive” and RoHS directive 2011/65/EU.

In addition, the BEETLE /iPOS Plus Advanced has received the UL

symbol and cUL symbol.

1.1

1.1 FCC Class-A Declaration

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-

struction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense. Modifications not authorized by the

manufacturer may void users’ authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired

operation.

CAN UCES-3 (A)/NMB-3(A)

1.2

1.2 Energy Efficiency

iPOS Plus Advanced is tested in an accredited test lab and can meet the Eligibility Criteria for Integrated

Desktop laid down in ENERGY STAR version 6.0 for Computers. On a request basis, an application can

be made to Energy Star for listing.

01750299682 D

1-1

Manufacturer's Certification

1.3

1.3 Wireless Declaration of Conformity

Hereby, Diebold Nixdorf declares that this device is in compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EC.

Csěky [Czech]: Diebold Nixdorf tímto prohlašuje, že tento zařízení je ve shodě se základ-

ními požadavky a dalšími příslušnými ustanoveními směrnice 2014/53/ES.

Dansk [Danish]: Undertegnede Diebold Nixdorf erklærer herved, at følgende udstyr Enhed

overholder de væsentlige krav og øvrige relevante krav i direktiv 2014/53/

EF.

Deutsch [German]: Hiermit erklärt Diebold Nixdorf, dass sich das Gerät in Übereinstimmung

mit den grundlegenden Anforderungen und den übrigen einschlägigen

Bestimmungen der Richtlinie 2014/53/EG befindet.

Eesti [Estonian]: Käesolevaga kinnitab Diebold Nixdorf seadme vastavust direktiivi

2014/53/EÜ põhinõuetele ja nimetatud dire ktiivist tulenevatele teistele as-

jakohastele sätetele.

English: Hereby, Diebold Nixdorf declares that this device is in compliance with the

essential requirements and other relevant provisions of Directive 2014/53/

EC.

Español [Spanish]: Por medio de la presente declara que el dispositivo cumple con los requis-

itos esenciales y cualesquiera otras disposiciones aplicables o exigibles

de la Directiva 2014/53/CE.

Ελληνική [Greek]: ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Diebold Nixdorf ΔΗΛΩΝΕΙ ΟΤΙ συσκευή

ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ

ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2014/53/ΕΚ.

Français [French]: Par la présente Diebold Nixdorf déclare que l'appareil est conforme aux

exigences essentielles et aux autres dispositions pertinentes de la direct-

ive 2014/53/CE.

Italiano [Italian]: Con la presente Diebold Nixdorf dichiara che questo dispositivo è con-

forme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite

dalla direttiva 2014/53/CE.

Latviski [Latvian]: Ar šo Diebold Nixdorf deklarē, ka ierīce atbilst Direktīvas 2014/53/EK būt-

iskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių [Lithuanian]: Šiuo Diebold Nixdorf deklaruoja, kad šis prietaisas atitinka esminius reika-

lavimus ir kitas 2014/53/EB Direktyvos nuostatas.

Nederlands [Dutch]: Hierbij verklaart Diebold Nixdorf dat het toestel apparaat in overeenstem-

ming is met de essentiële eisen en de andere relevante bepalingen van

richtlijn 2014/53/EG.

Malti [Maltese]: Hawnhekk, Diebold Nixdorf jiddikjara li dan apparat jikkonforma mal-

ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirret-

tiva 2014/53/EC.

Magyar [Hungarian]: Alulírott, Diebold Nixdorf nyilatkozom, hogy a eszköz megfelel a von-

atkozó alapvetõ követelményeknek és az 2014/53/EC irányelv egyéb

elõírásainak.

01750299682 D

Manufacturer's Certification

Polski [Polish]: Niniejszym Diebold Nixdorf oświadcza, że urządzenie jest zgodny z zas-

adniczymi wymogami oraz pozostałymi stosownymi postanowieniami

Dyrektywy 2014/53/EC.

Português [Portuguese]: Diebold Nixdorf declara que este dispositivo está conforme com os requis-

itos essenciais e outras disposições da Directiva 2014/53/CE.

Slovensko [Slovenian]: Diebold Nixdorf izjavlja, da je ta Naprava v skladu z bistvenimi zahtevami

in ostalimi relevantnimi določili direktive 2014/53/ES.

Slovensky [Slovak]: Diebold Nixdorf týmto vyhlasuje, že zariadenie spĺňa základné požiadavky

a všetky príslušné ustanovenia Smernice 2014/53/ES.

Suomi [Finnish]: Diebold Nixdorf vakuuttaa täten että laite on direktiivin 2014/53/EY oleel-

listen vaatimusten ja sitä koskevien direktiivin muiden eh tojen mukainen.

Svenska [Swedish]: Härmed intygar Diebold Nixdorf att denna enhet står I överensstämmelse

med de väsentliga egenskapskrav och övriga relevanta bestämmelser

som framgår av direktiv 2014/53/EG.

Íslenska [Icelandic]: Hér með lýsir Diebold Nixdorf yfir því að tæki er í samræmi við grunnkröfur

og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EC.

Norsk [Norwegian]: Diebold Nixdorf erklærer herved at utstyret enhet er i samsvar med de

grunnleggende krav og øvrige relevante krav i direktiv 2014/53/EF.

The declaration of conformity may be consulted at: http://www.dieboldnixdorf.com

01750299682 D

1-3

Manufacturer's Certification

1.4

1.4 Important Notes

Diebold Nixdorf is not responsible for any radio and television malfunctions which emerge from unauthor-

ized changes in the device. Make sure that only cables and devices may be connected which are admit-

ted by Diebold Nixdorf. The user is responsible for any malfunctions that emerge from the actions men-

tioned before.

The device may only be installed, or repaired by authorized qualified personnel.

Unauthorized opening of the device and inexpertly carried-out repairs may not

only seriously jeopardize the safety of the user, but also cancel all warranty and

liability agreements.

Expansion cards with electrostatically sensitive devices (ESD) may be marked

with this sticker.

When opening the device or handling modules fitted with ESD, please observe the following instructions,

which pertain to all electrostatic sensitive devices (ESDs):

1. Always use the antistatic kit.

2. Statically discharge yourself, for example by touching an earthed object (such as a heat radiator)

before beginning to work with ESD-labeled components.

3. Likewise, all equipment and tools used in working with such components must be free of static

charge.

4. Pull the mains plug before inserting or removing such components.

5. Only handle such components by their edges.

6. Never touch any terminal pins of the strip conductors on such components.

01750299682 D

Manufacturer's Certification

1.5

1.5 Safety Notes

The iPOS plus Advanced conforms to the current safety standards for data processing equipment.

• If this device is taken from a cold environment into the operating room, moisture condensation may

form. The device must be absolutely dry before being put into service; an acclimatization period of at

least two hours must therefore be observed.

• This device is equipped with a safety-tested power cable and may be connected only to a prescribed

grounded-contact power socket.

• When setting up the device, ensure that the power socket on the device and the grounded-contact

power socket are easily accessible.

• Whenever work of any kind is done on the device, as well as when data cables are plugged and/or

unplugged, the device must be completely disconnected from the line voltage. To do so, turn the

device off and unplug the power cord.

• To disconnect the device from the supply voltage completely, switch off the device and disconnect

the power plug of the system.

• Never plug in or unplug data communication lines during thunderstorms.

• Protect devices from vibrations, dust, moisture and heat.

• Always dispose of used parts, such as batteries, in an environmentally safe manner.

• In emergencies (e.g. damaged housing or damaged power cable, penetration by liquids or foreign

bodies), the device must be switched off immediately, the power plug disconnected and the Cus-

tomer Service of Diebold Nixdorf or your dealer must be notified.

• Your iPOS plus Advanced system is the result of modern technical innovation. So please see for ac-

cording structural and technical surroundings to guarantee a faultless and efficient work of your iPOS

plus Advanced. Therefore, you should connect your iPOS plus Advanced or other IT-devices only to

power supply systems with separately guided protective earth conductor (PE). This kind of electricity

system is known as TN-S network. Do not use PEN conductors!

• Please also observe the recommendations of the norm DIN VDE 0100, Part 540, Appendix C2 as

well as EN50174-2, §5.4.3.Thus you can help to avoid possible malfunctions.

• If you replace a storage medium, make sure that you only use the storage medium recommended or

approved by Diebold Nixdorf.

• You can connect or disconnect USB devices during operation of your iPOS plus Advanced, provided

that these devices comply with the specifications according to usb.org. Other peripheral devices

(such as Powered USB printer) should be connected to or disconnected from your iPOS plus Ad-

vanced system only after the iPOS plus Advanced has been switched off.

01750299682 D

1-5

Manufacturer's Certification

1.6

1.6 Supplier's Declaration of Conformity

Product Description: POS Terminal

Model: BEETLE /iPOS plus Advanced

Party issuing Supplier’s Declaration of Conformity

Diebold Nixdorf Singapore PTE. LTD.

151 Lorong Chuan New Tech Park #05-01 A/B

Singapore 556741

Phone: +65 6747 3828

Responsible Party – U.S. Contact Information

Diebold Nixdorf

5995 Mayfair Road

N. Canton, OH 44720 / USA

Phone: +1 330 490 5049

FCC Compliance Statement (for products subject to Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference re-

ceived, including interference that may cause undesired operation.

01750299682 D

2 Introduction

2.1

2.1 About This Manual

This documentation is intended to help you to work with the iPOS plus Advanced (2

generation) system

and to serve as a reference work. The detailed table of contents will help you find the desired information

quickly and easily.

Notes in the manual are marked by this symbol.

This symbol is used for warnings.

The type and scope of application programs depend on the customer’s own selection; therefore, soft-

ware will not be discussed further in this manual.

2.2

2.2 Care of the iPOS Plus Advanced

Clean your system’s housing at regular intervals with a dry, lint-free cloth. If this does not suffice please

use a suitable plastic-surface cleaner which you can order from Diebold Nixdorf.

For more information about cleaning read the chapter “Projective Capacitive Touch Screen” and “Resist-

ive Touch Screen”. When cleaning always make sure that the power plug is disconnected and that no li-

quid finds its way into the device.

01750299682 D

2-1

Introduction

2.3

2.3 Recycling the iPOS Plus Advanced

Environmental protection does not begin when the time has come to dispose of the iPOS plus Advanced;

it begins with the manufacturer. This product was designed according to our internal norm “Environ-

mental conscious product design and development”.

The iPOS plus Advanced system is manufactured without the use of CFC and CHC and is produced

mainly from reusable components and materials.

Please do not stick labels onto plastic case parts. This would help us to reuse components and material.

But there are still some parts that are not reusable. Diebold Nixdorf guarantees the environmentally safe

disposal of these parts in a Recycling Center, which is certified pursuant to ISO 9001 and ISO 14001.

You can protect our environment by only switching on your equipment when it is actually needed. If pos-

sible, even avoid the stand-by-mode as this wastes energy, too. Also switch your equipment off when

you take a longer break or finish your work.

Please contact your competent branch or the Recycling Center Paderborn (for European countries) for

information on how to return and reuse devices and disposable materials under the following mail ad-

dress.

Email: [email protected] or on the internet.

2.4

2.4 Warranty

In general, damages due to:

• improper or insufficient maintenance,

• improper use of the product or unauthorized modifications of the product,

• inadequate location or surroundings

will not be covered by the warranty.

For further information on the stipulation consult your contract.

All parts of the product which are subject to wear and tear are not included in the warranty engagement.

For detailed warranty arrangements please consult your contract documents.

Please order spare parts at the Diebold Nixdorf customer service.

01750299682 D

Introduction

2.5

2.5 Lithium Battery

CAUTION!

Incorrect replacement of the Lithium Battery may lead to a risk of explosion

The end user must replace the lithium battery only by identical batteries or types recommended by

Diebold Nixdorf.

Do not throw Lithium Batteries into the trashcan. It must be disposed of in accordance with local regula-

tions concerning special waste.

Make sure that you insert the Battery the right way round. The plus pole must be on top!

WARNING!

Always make sure that the system is switched off and the power cable is disconnected from the system

before you replace the battery.

01750299682 D

2-3

Introduction

2.6

2.6 Unpacking & Checking the Delivery Unit

Unpack the parts and check to see whether the delivery matches the information on the delivery note.

The delivery comprises the respective screen module. Data cables, necessary for operation, can be

ordered separately. lf damage has occurred during shipping or if the package contents do not match the

delivery note, immediately inform your Diebold Nixdorf sales outlet.

Transport the device only in its original packaging (to protect it against impact and shock).

01750299682 D

3 Basic Settings

This iPOS plus Advanced (2nd Generation) features a new motherboard based on Intel newer 6th Gen-

eration Core Processor with a more enhanced performance from the previous generations. Apart from

the slimmer aluminium housing which reduces the overall thickness by about 10mm, it also shares many

common parts.

The 6th Generation is the last of the Intel Core Processor series that supports Windows 7. If the applica-

tion environment is not restricted by the Windows Editions, there is, on a project basis, an optional 7th

Generation Core Processor to choose from.

3.1

3.1 Highlights

The iPOS plus Advanced configuration can consist of the following components:

3.1.1

3.1.1 Processor Type

Celeron G3900TE

Intel Core i3-6100TE

Intel Core i5-6500TE

Intel Core i3-7101TE

Intel Core i5-7500T

3.1.2

3.1.2 RAM

2 x DDR4 SODIMM socket

DDR4 SODIMM

Maximum size is 16GB

3.1.3

3.1.3 Mass Storage Options

2.5", 7mm HDD or SSD

M.2 2280 SATA SSD

01750299682 D

3-1

Basic Settings

3.1.4

3.1.4 Display

15" Color TFT LED backlight with touch options:

• Projected capacitive touch or

• 5-wire Resistive Touch screen

3.1.5

3.1.5 New Interface Ports

• USB Type C, Alternate DP + PD (Q170 variant only)

• 24V Powered USB

01750299682 D

Basic Settings

3.2

3.2 Setting Up the Device

The iPOS plus Advanced was developed for an in-house installation. The device is designed to be

mounted on a stand (desktop version), or on the wall (wall mount version) or on a pole.

Set up the iPOS plus Advanced system where it will not be exposed to extreme environmental condi-

tions. Protect the device from vibrations, dust, moisture, heat and strong magnetic fields.

3.3

3.3 Ergonomic Terminal Workplace

Please observe the following when setting up your terminal workplace:

Avoid direct glaring and reflective glaring. Use the

screen only in a controlled luminance surrounding.

Install the device with a viewing direction that is paral-

lel to the windows.

Avoid reflective glaring caused by electric light

sources.

Position the screen within a preferred and permitted

range of vision, so that you can look onto the screen

from above.

01750299682 D

3-3

4 Overview

4.1

4.1 Front View with Stand

Display

Stand

Ambient light and Proximity Sensors

Brightness adjustment, LEDs

Power status indicator

01750299682 D

4-1

Overview

4.2

4.2 Back View with Stand

Side-attach peripheral connection cover

VESA mount cover

Access cover

Hinge cover

Base cover of stand

Cable connection cover

Side-attach peripheral connection cover

01750299682 D

Overview

4.3

4.3 AC Power Adapter

AC Power Cord

DC Power Out

Power Indicator

The external power supply is applicable for common line voltage.

It automatically adjusts itself to the particular voltage (for grid input voltage and power supply see ap-

pendix).

01750299682 D

4-3

La pagina sta caricando ...

Wincor Nixdorf BEETLE /iPOS plus Advanced Skylake Manuale utente

Marca: Wincor Nixdorf

Modello: BEETLE /iPOS plus Advanced Skylake

Categoria: Terminali POS

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Wincor Nixdorf BEETLE /iPOS plus Advanced Skylake User manual

Wincor Nixdorf BEETLE /iPOS plus Advanced Skylake Manuale utente

Wincor Nixdorf BEETLE /iPOS plus Advanced Skylake Manuale utente

in altre lingue

Documenti correlati

Altri documenti