Sony KD-55AG8 Guida di riferimento

4-748-602-11(1)

Television

Reference Guide

GB

Guide de référence

FR

Guía de referencia

ES

Referentiegids

NL

Referenzanleitung

DE

Guia de referência

PT

Guida di riferimento

IT

Referensmaterial

SE

Referencevejledning

DK

Viiteopas

FI

Referanseveiledning

NO

Przewodnik

PL

Referenční příručka

CZ

Referenčná príručka

SK

Felhasználói útmutató

HU

Ghid de referinţă

RO

Информация за продукта

BG

Οδηγός αναφοράς

GR

Başvuru Kılavuzu

TR

KD-65AG8 / 55AG8

2

GB

Table of Contents

IMPORTANT NOTICE . . . . . . . . . . . . . . . . . . . . 2

Safety Information . . . . . . . . . . . . . . . . . . . . . 2

Protecting the TV Screen (OLED TV) . . . . . . . 3

Parts and Controls . . . . . . . . . . . . . . . . . . . 5

Controls and Indicators . . . . . . . . . . . . . . . . . 5

Using Remote Control . . . . . . . . . . . . . . . . 6

Remote Control Parts Description. . . . . . . . .6

Connection Diagram . . . . . . . . . . . . . . . . . 8

Using Sound Bar (not supplied) . . . . . . . .11

Installing the TV to the Wall . . . . . . . . . . 12

Using the optional Wall-Mount Bracket

(SU-WL850 or SU-WL450) . . . . . . . . . . . . . . 12

Troubleshooting. . . . . . . . . . . . . . . . . . . . 13

Troubles and Solutions. . . . . . . . . . . . . . . . . 13

Specifications . . . . . . . . . . . . . . . . . . . . . . 14

Introduction

Thank you for choosing this Sony product.

Before operating the TV, please read this manual thoroughly and

retain it for future reference.

Note

• Before operating the TV, please read the “Safety Information”

(page

2).

• Read the supplied Safety Information for additional safety

information.

• Images and illustrations used in the Setup Guide and this

manual are for reference only and may differ from the actual

product.

Location of the identification label

Labels for the TV Model No., Production Date (year/month) and

Power Supply rating are located on the rear of the TV or package.

Notice for Radio Equipment

Hereby, Sony Visual Products Inc. declares

that the radio equipment types

KD-65AG8, KD-55AG8 are in compliance

w

ith Directive 2014/53/EU. The full text of the EU declaration of

conformity is available at the following internet address:

http://www.compliance.sony.de/

Notice for customers: the following information is only applicable

t

o equipment sold in countries applying EU directives.

For this radio equipment, the following restrictions on putting into

se

rvice or of requirements for authorization of use apply in

AT, BE, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT,

NL, PL, PT, SK, SI, ES, SE, UK, IS, LI, NO, CH, BG, RO, TR, AL, BA, MK,

MD, RS, ME, Kosovo :

5150 - 5350 MHz band is restricted to indoor operations only.

Installation/Set-up

Install and use the TV set in accordance with the instructions

below in order to avoid any risk of fire, electric shock or damage

and/or injuries.

Installation

• The TV set should be installed near an easily accessible mains

socket.

• Place the TV set on a stable, level surface to prevent it from

fa

lling over and causing personal injury or property damage.

• Install the TV where it cannot be pulled, pushed, or knocked

over.

To attach the Table-Top

Stand, refer to the Setup

Gui

de.

Internet Connection and Data Privacy

This product connects to the internet during initial setup as soon

as a network is connected in order to confirm internet

connection, and later to configure the Home screen. Your IP

address is used in these and all other internet connections. If

you do not want your IP address be used at all, do not set-up the

wireless internet function and do not connect an internet cable.

Please refer to the privacy information presented in the set-up

screens for further details of internet connections.

Help

Find more troubleshooting and other useful information

directly from your TV. Press HELP on the remote control to

display a list of topics, or to search by keyword.

Help Guide (Manual)

For more detailed information, select [Help Guide] from the

Help menu on your TV. You can also check the Help Guide from

your PC or smartphone (information provided on the back

cover of this manual).

IMPORTANT NOTICE

Safety Information

3

GB

• Install the TV so that the TV’s Table-Top Stand does not protrude

out from the TV stand (not supplied). If the TV’s Table-Top Stand

protrudes out from the TV stand, it may cause TV set to topple

over, fall down, and cause personal injury or damage to the TV.

• Only qualified service personnel should carry out wall-mount

installations.

• For safety reasons, it is strongly recommended that you use

Sony accessories, including:

 Wall-Mount Bracket SU-WL850

 Wall-Mount Bracket SU-WL450

• Be sure to use the screws supplied with the Wall-Mount Bracket

w

hen attaching the Wall-Mount Bracket to the TV set. The

supplied screws are designed as indicated by illustration when

measured from the attaching surface of the Wall-Mount Bracket.

The diameter and length of the screws differ depending on the

Wall-Mount Bracket model.

Use of screws other than those supplied may result in internal

d

amage to the TV set or cause it to fall, etc.

Transporting

• Before transporting the TV set, disconnect all cables.

• Two or three people are needed to transport a large TV set.

• When transporting the TV set by hand, hold it as shown below.

Do not put stress on the panel and the frame around the screen.

• When handling or mounting the

T

V set, do not lay down the TV.

• When transporting the TV set, do

n

ot subject it to jolts or excessive vibration.

• When transporting the TV set for repairs or when moving, pack

it

using the original carton and packing material.

Topple prevention

Precautions to Protect the Screen from

Damage

Image retention

OLED TV‘s are susceptible to image retention (burn-in) due to the

characteristics of the materials used. Image retention may occur if

images are displayed in the same location on the screen

repeatedly or over extended periods of time. This is not a

malfunction of the TV. Avoid displaying images that may cause

image retention.

The following are examples of images that may

cause image retention:

• Content with black bars either on the top and bottom and/or

the left and right sides of the screen. (for example, Letterboxed,

4:3 screen, Standard definition)

• Static images such as photos.

• Video games that might have static content in some part of the

scr

een.

• On-screen menus, programme guides, channel logos etc.

• Static content from applications.

• On-screen tickers, such as those used for news and headlines.

Screw (M6)

Wall-Mount Bracket

8 mm - 12 mm

TV’s rear cover

Protecting the TV Screen (OLED TV)

M6 screw (not supplied)

Cord

(not supplied)

Screw (not supplied)

8 mm - 12 mm

1.5 N∙m

{15 kgf∙cm}

4

GB

To reduce the risk of image retention:

• Sony recommends that you turn off the TV normally by pressing

the power button on the remote control or the TV.

• Fill the screen by changing [Wide mode] to eliminate the black

bars. Select [Wide mode] other than [Normal].

• Turn off the OSD (On Screen Display) by pressing the /

button, and turn off the menus from connected equipment. For

d

etails, refer to the instruction manuals for the connected

equipment.

• Avoid displaying static images with bright colours (including

white), clocks or logos on any portion of the screen.

• Set the picture settings based on the ambient conditions. The

Standard Picture is recommended for home use and when

viewing content that often displays the station logos, etc.

The TV has following features to help reduce/prevent image

r

etention.

Panel refresh

Panel refresh will automatically run to adjust the uniformity of the

TV screen after it has been in use for long periods of time. Panel

refresh can also be performed manually and should only be used

if image retention is very noticeable or you see the following

message: [Panel refresh did not finish…]

Caution:

• The Panel refresh function may affect the panel. As a reference,

perform the Panel refresh only once a year, do not perform it

more than once a year as it may affect the usable life of the

panel.

• Panel refresh takes about one hour to complete.

• A white line may be displayed on the screen during the Panel

r

efresh, this is not a malfunction of the TV.

• Panel refresh will only work when the room temperature is

between 10 ºC and 40 ºC.

Pixel shift

Automatically moves the image on the screen to prevent image

retention.

Other feature

The screen brightness is automatically reduced when displaying

still images, clocks, bright colours or logos etc.

5

GB

Parts and Controls

 (Power) / + / –

When the TV is off,

Press  to

power on.

When the TV is on,

Press and hold  to

power off.

Press 

repeatedly to change the function,

then press + or – button to:

•Adjust the volume.

• Select the channel.

• Select the input source of TV.

 Remote Control sensor* /

Light sensor* / Illumination LED

The illumination LED lights up or blinks

according to the status of the TV.

For more information, refer to the Help

Gu

ide.

* Do not place anything near the sensor.

Controls and Indicators

̕

ȩ

6

GB

Using Remote Control

/ (Input select/Text hold)

In TV mode: Display and select the input

source.

In Text mode: Hold the current page.

 (TV standby)

Turn on or turn off the TV (standby mode).

DIGITAL/ANALOG

Switch between digital and analogue input.

TV/RADIO

Switch between TV or RADIO broadcasts.

EXIT

Return to the previous screen or exit from

the menu. When an Interactive Application

service is available, press to exit from the

service.

 Number buttons

/ (Info/Text reveal)

Display information.

 (Text)

Display text information.

Remote Control Parts Description

The remote control shape, location, availability and function of remote control buttons may vary

depending on your region/country/TV model.

MIC

(Microphone)

Use voice search*. (e.g., Search

various content by voice.)

EXT.BOX MENU

Display the connected External Box

(cable/satellite box) menu.

• For models with supplied IR Blaster,

connect and set up the IR Blaster

(page 9).

• The External Box menu may be

displayed for some HDMI CEC

compatible devices when the IR

Blaster is not supplied/connected.

//// (Navigation D-Pad)

On screen menu navigation and

selection.

TV

Switch to a TV channel or input and

display the TV Menu Bar.

* The voice search requires an Internet connection.

7

GB

 Google Play

Access the “Google Play” online service.

NETFLIX (Only on limited region/

country/TV model)

Access the “NETFLIX” online service.

Colour buttons

Execute corresponding function at that time.

 ACTION MENU

Display a list of contextual functions.

GUIDE/

Display the digital programme guide, or EPG

of External Box (cable/satellite box) after

setting [IR Blaster setup] (IR Blaster

compatible models only).

APPS

Access various services and applications.

BACK/

Return to the previous screen.

HOME

Display the TV Home Menu.

 +/– (Volume)

Adjust the volume.

(Jump)

Jump back and forth between two channels

or inputs. The TV alternates between the

current channel or input and the last

channel or input that was selected.

 (Mute)

Mute the sound. Press again to restore the

sound.

PROG +/–//

In TV mode: Select the channel.

In Text mode: Select the next () or

previous () page.

 AUDIO

Select the sound of multilingual source or

dual sound for the programme currently

being viewed (depend on programme

source).

//////

Operate media contents on the TV and

connected BRAVIA Sync-compatible device.

(Subtitle setting)

Turn subtitles on or off (when the feature is

available).

HELP

Display the Help menu. Help Guide can be

accessed from here.

 REC

Record the currently viewed programme on

the USB HDD.

TITLE LIST

Display the Title list.

8

GB

Connection Diagram

For more information on connections, refer to the Help Guide by pressing HELP on the remote control.

<

Cable/

Antenna/

External Box

Router

Satellite

Audio

System

with

ARC/

HDMI

Device

Digital still camera/

Camcorder/USB

storage media

Headphone/Audio

System/Subwoofer

7 mm

IR Blaster

HDMI

Device

HDMI Device

VCR/Video game

equipment/DVD player/

Camcorder/External Box*

1

1.5 mm

Conditional

Access Module

Digital still

camera/

Camcorder/USB

storage media/

USB HDD device

HDMI

Device

Audio System

with Optical

Audio Input

< 14 mm

9

GB

 CAM (Conditional Access Module)

•Provides access to pay TV services. For

details, refer to the instruction manual

supplied with your CAM.

• Do not insert the smart card directly into

th

e TV CAM slot. It must be fitted into the

Conditional Access Module provided by

your authorised dealer.

• CAM is not supported in some countries/

a

reas. Check with your authorised dealer.

• A CAM message may appear when you

s

witch to a digital programme after using

the Internet video.

/ AV IN

• For a composite connection, use an

Analogue Extension Cable (not supplied).

•

 AUDIO OUT /

• Supports 3-pole stereo mini jack only.

• To listen to the TV's sound through the

c

onnected equipment, press HOME.

Select [Settings]  [Sound] 

[Headphone/Audio out] and then select

the desired item.

 IR BLASTER*

2

• Use your Sony remote control to control

your External Box (cable/satellite box).

Connect the IR Blaster Cable*

2

to the IR

Blaster port on your TV. Place one or both

of the other two ends as shown below.

• To perform IR Blaster setup, press HO

ME

and select [Settings]  [External inputs]

 [IR Blaster setup].

 USB 1/2, USB 3 (HDD REC)*

2

• Connecting a large USB device may

interfere with other connected devices

beside it.

• When connecting a large USB device,

c

onnect to the USB 1 port.

• Connect a USB HDD device to the USB 3

po

rt (blue).

 HDMI IN 1/2/3/4

• HDMI interface can transfer the digital

video and audio on a single cable.

•

• HDMI IN 2/3

To enjoy high quality 4K 50p/60p

c

ontents, connect a Premium High Speed

HDMI cable to the HDMI IN 2/3 and set the

[HDMI signal format] to [Enhanced

format].

For details of supported formats, refer to

the “Specifications“ in this manual (page

14-16).

• HD

MI IN 3 ARC (Audio Return Channel)

Connect your audio system to the

HDMI IN 3 to route TV audio to your audio

sy

stem. An audio system that supports

HDMI ARC can send video to the TV, and

receive audio from the TV via the same

HDMI cable. If your audio system does not

support HDMI ARC, an additional

connection with DIGITAL AUDIO OUT

(OPTICAL) is necessary.

3.5 mm

1234

1: L

2: Video

3: Ground

4: R

< 12 mm

< 21 mm

10

GB

 (RF input), (Satellite input)

• Connections for terrestrial/cable and

satellite. Connection steps: SUB.  MAIN

 Antenna

• For SUB. jack, connect only when you are

us

ing twin tuner mode except for Single

Cable Distribution EN50494.

*1 For an external device which has only SCART AV

OUT, use a SCART-RCA adaptor and Analogue

Extension Cable.

*2 Only on limited region/country/TV model.

11

GB

Using Sound Bar (not supplied)

 Recommended (in front of the TV)

Place the sound bar (not supplied) in front of the TV's Table-Top Stand.

 Alternate (on the Table-Top Stand)

If there is not enough space to place the sound bar in front of the TV, attach the rubber feet (supplied

with the TV) to the bottom of the sound bar (not supplied) and place the sound bar on top of the

Table-Top Stand.

* Only on limited region/country.

Note

• Make sure that the sound bar height is not blocking the path between the remote control and the IR sensor on your

TV.

• By using rubber feet, the sound condition may vary depending on sound bar model.

• Do not cover the ventilation hole and the identification label with the rubber feet.

• Be sure to store the removed rubber feet in a safe place, keeping them away from children. (e.g., When sending the

so

und bar for repair)

Recommended sound bar:

HT-ZF9* (not supplied)

12

GB

Installing the TV to the Wall

To Customers:

For product protection and safety reasons, Sony strongly recommends that installation of your TV be

p

erformed by Sony dealers or licensed contractors. Do not attempt to install it yourself.

To Sony Dealers and Contractors:

Provide full attention to safety during the installation, periodic maintenance and examination of this

pr

oduct.

Wall-Mount Bracket Installation Information

This TV’s instruction manual only provides the steps to prepare the TV for Wall-Mount installation

before it is installed on the wall.

For instructions on Wall-Mount Bracket installation, see the Installation Information (Wall-Mount

B

racket) on the product page for your TV model.

www.sony.eu/support/

Preparing for Wall-Mount Installation

Use the Wall-Mount Bracket SU-WL850 (not supplied) or SU-WL450 (not supplied) to install the TV to

the wall.

Make sure to attach the Table-Top Stand before installing the TV to the wall by referring to the Setup

Gu

ide.

• Prepare the TV for the Wall-Mount Bracket before making cable connections.

• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient

e

xpertise is required in installing this TV, especially to determine the strength of the wall for

withstanding the TV’s weight.

• Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed

c

ontractors and pay adequate attention to safety during the installation. Sony is not liable for

any damage or injury caused by mishandling or improper installation.

• The screws for Wall-Mount Bracket are not supplied.

• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to

a

ttach the Table-Top Stand. Keep the screws away from small children.

Remove the screws from the rear of the TV.

Using the optional Wall-Mount Bracket (SU-WL850 or SU-WL450)

13

GB

Troubleshooting

General troubleshooting for issues like: black

screen, no sound, frozen picture, TV does not

respond, or network is lost, do the following

steps.

1 Restart your TV by pressing the power button

on the remote control until a message

appears. The TV will restart. If the TV does not

recover, try unplugging the mains lead. Then

press the power button on the TV and wait for

two minutes, and plug in the mains lead.

2 Refer to the Help menu by pressing HELP on

the remote control.

3 Connect your TV to the Internet and perform

a software update. Sony recommends you to

keep your TV software updated. Software

updates provide new features and

performance improvements.

4 Visit Sony support website (information

provided on the front cover of this manual).

When [A new TV system software update is

available…] message is displayed.

Sony strongly recommends you to update the

T

V software by selecting [Update Now]. These

software updates improve your TV performance

or add new features.

The following screen with [Updating…] will

a

ppear and the illumination LED flashes white

while software is updating.

Do not unplug the mains lead during the

so

ftware update. If you do, the software update

may not finish completely, and it may cause a

software malfunction. Software updates can

take up to 15 minutes.

When you plug in the TV, the TV may not be

a

ble to turn on for a while even if you press

the power button on the remote control or

the TV.

It takes time to initialize the system. Wait for

ab

out one minute, then operate it again.

Troubles and Solutions

When the illumination LED is flashing in red.

 Count how many times it flashes (interval time is

three seconds).

Reboot the TV by disconnecting the mains lead

unti

l the illumination LED stopped flashing in red,

then turn on the TV.

If the problem persists, disconnect the mains

l

ead, and contact your dealer or Sony service

centre with the number of times the illumination

LED flashes.

Terrestrial/cable service cannot be received.

 Check the antenna (aerial)/cable connection and

booster settings.

 Select terrestrial/cable service by pressing

DIGITAL/ANALOG on the remote control. If the

broadcasting service is not displayed, press TV

and then press DIGITAL/ANALOG.

 Terrestrial signal might be suppressed if there is a

strong signal supplied nearby. Set [LNA (CH ---)]

to [Off] in digital tuning settings.

 After moving to a new house or trying to receive

new services, attempt a service search by

selecting [Digital tuning].

Satellite service cannot be received.

 Check the satellite cable connection.

 When [No signal. LNB overload detected…]

message is displayed, unplug the mains lead.

Then, ensure the satellite cable is not damaged

and the satellite signal line is not short-circuited

in the satellite connector.

The remote control does not function.

 Replace the batteries.

The EXT.BOX MENU button on the remote

control does not work.

 Connect and set up the IR Blaster (models with

supplied IR Blaster only) (page 9).

 Connect HDMI CEC compatible device (except

models with supplied IR Blaster) and change to

that input.

The parental lock for broadcast password has

been forgotten.

 Enter 9999 for the PIN code and select [Change

PIN code].

The TV surrounds become warm.

 When the TV is used for an extended period, the

TV surrounds become warm. You may feel hot

when touching there by the hand.

Updating...

14

GB

The screen becomes darker while watching

TV.

 If the whole image or part of the image remains

still, the screen brightness will be gradually

reduced to prevent image retention. This is not a

malfunction of the TV.

You are concerned about image retention.

If the same image is displayed repeatedly or for

l

ong periods of time, image retention may

occur. To reduce image retention, we

recommend that you turn off the TV normally by

pressing the power button on the remote

control or the TV.

Note

• Perform Panel refresh manually only when image

retention is particularly noticeable. As a reference,

perform it only once a year. Avoid performing it more

than once a year because it may affect the usable life

of the panel.

• Images that include clocks, logos and bright colours

(including white) easily cause image retention. Avoid

displaying these types of images for long periods of

time, otherwise image retention may occur.

A white line appears on the screen.

 Panel refresh automatically runs after the TV has

been used for long periods of time to reduce

image retention. Panel refresh starts after the TV

is turned off and takes about one hour to

complete. A white line may be displayed on the

screen during the Panel refresh. This is not a

malfunction of the TV.

The message [Panel refresh did not finish…] is

displayed.

Panel refresh automatically runs after the TV has

been

used for long periods of time to reduce

image retention. If the TV is turned on, the

mains lead is unplugged, or the room

temperature falls outside of the range between

10 ºC and 40 ºC during the Panel refresh, the

process will not be completed and this message

will appear.

 If Panel refresh started automatically, it will restart

when you turn off the TV with the remote control.

 If Panel refresh initiated manually, you must

select it again.

Specifications

System

Panel system

OLED (Organic Light Emitting Diode) Panel

TV system

Depending on your country/area selection/TV

model

Analogue: B/G, D/K, I

Digital: DVB-T/DVB-C

DVB-T2*

1

Satellite*

1

: DVB-S/DVB-S2

Colour system

PAL/SECAM/NTSC3.58 (Video only)/NTSC4.43

(Video only)

Channel coverage

Depending on your country/area selection/TV

model

Analogue: UHF/VHF/Cable

Digital: UHF/VHF/Cable

Satellite*

1

: IF Frequency 950-2,150 MHz

Sound output

10 W + 10 W + 10 W + 10 W

Wireless technology

Protocol IEEE802.11ac/a/b/g/n

(IEEE802.11ac may not be available depending on

cou

ntries/regions.)

Bluetooth Version 4.1

Frequency band(s)

RMF-TX220E

Wireless LAN (IEEE802.11ac/a/b/g/n)

Frequency range Output Power

2400 - 2483.5 MHz < 20.0 dBm

5150 - 5250 MHz < 23.0 dBm

5250 - 5350 MHz < 20.0 dBm

5470 - 5725 MHz < 20.0 dBm

5725 - 5850 MHz < 13.9 dBm

Bluetooth

Frequency range Output Power

2400 - 2483.5 MHz < 10.0 dBm

Bluetooth

F

requency range Output Power

2400 - 2483.5 MHz < 10.0 dBm

15

GB

Software version

This radio equipment is intended to be used with

the approved version(s) of software that are

indicated in the EU Declaration of Conformity.

Press HE

LP on the remote control to know the

software version.

Remote control: _._.__.___

Press HOME,

then select [Settings]  [Voice

Remote Control]  [Software version].

The software loaded on this radio equipment is

v

erified to comply with the essential requirements

of the Directive 2014/53/EU.

Input/Output jacks

Antenna (aerial)/cable

75 ohm external terminal for VHF/UHF

Satellite antenna*

1

Female F Type Connector, 75 ohm.

DiSEqC 1.0, LNB 13 V/18 V & 22 kHz tone, Single

Ca

ble Distribution EN50494.

/ AV IN

Video/Audio input (mini jack)

HDMI IN 1/2/3/4 (support 4K resolution, HDCP

2.3-compatible)

Video:

4096 × 2160p (50, 60 Hz)*

2

*

3

, 4096 × 2160p

(24 Hz)*

2

, 3840 × 2160p (50, 60 Hz)*

3

,

3840 × 2160p (24, 25, 30 Hz), 1080p (30, 50,

60 Hz), 1080/24p, 1080i (50, 60 Hz), 720p

(30, 50, 60 Hz), 720/24p, 576p, 576i, 480p, 480i,

PC Formats*

4

Audio:

5.1 channel linear PCM: 32/44.1/48/88.2/96/

1

76.4/192 kHz 16/20/24 bits, Dolby Digital,

Dolby Digital Plus and DTS

ARC (Audio Return Channel) (HDMI IN 3 only)

(Two channel linear PCM: 48 kHz 16 bits, Dolby

Digital, Dolby Digital Plus, DTS)

DIGITAL AUDIO OUT (OPTICAL)

Digital optical jack (Two channel linear PCM:

48 kHz 16 bits, Dolby Digital, DTS)

AUDIO OUT / (Stereo mini jack)

Headphone, Audio output, Subwoofer

1, 2, 3 (HDD REC)*

5

USB device port ( 3 USB HDD device for REC

feature)

USB port 1 and 2 support High Speed USB

(USB 2.0)

USB port 3 supports Super Speed USB (USB 3.1

Ge

n 1)

CAM (Conditional Access Module) slot

LAN

10BASE-T/100BASE-TX connector (Depending on

the operating environment of the network,

connection speed may differ. The communication

rate and quality are not guaranteed.)

IR BLASTER *

5

IR Blaster Cable input (mini jack)

Others

Optional accessories

Wall-Mount Bracket: SU-WL850

Wall-Mount Bracket: SU-WL450

Operating temperature

0 ºC – 40 ºC

Operating humidity

10 % – 80 % RH (non-condensing)

Power, Product Fiche and others

Power requirements

220 V - 240 V AC, 50 Hz

Energy Efficiency Class

KD-65AG8: B

KD-55AG8: B

Screen size (measured diagonally) (Approx.)

KD-65AG8: 163.9 cm / 65 inches

KD-55AG8: 138.8 cm / 55 inches

Power consumption

In [Standard] mode

KD-65AG8: 167 W

KD-55AG8: 130 W

In [Vivid] mode

KD-65AG8: 487 W

KD-55AG8: 376 W

Annual energy consumption*

6

KD-65AG8: 232 kWh per year

KD-55AG8: 180 kWh per year

Standby power consumption*

7

*

8

0.50 W (27 W in software/EPG update mode)

Display resolution

3,840 dots (horizontal) × 2,160 lines (vertical)

Output Rating

USB 1/2

5 V , 500 mA MAX

USB 3

5 V , 900 mA MAX

Dimensions (Approx.) (w × h × d)

with Table-Top Stand

Standard position:

KD-65AG8: 145.0 × 85.4 × 29.0 cm

KD-55AG8: 122.9 × 73.0 × 29.0 cm

Sound bar position:

KD-65AG8: 145.0 x 90.4 x 29.0 cm

KD-55AG8: 122.9 x 78.0 x 29.0 cm

16

GB

without Table-Top Stand

KD-65AG8: 145.0 × 83.4 × 5.1 cm

KD-55AG8: 122.9 × 71.0 × 5.1 cm

Mass (Approx.)

with Table-Top Stand

KD-65AG8: 22.5 kg

KD-55AG8: 19.8 kg

without Table-Top Stand

KD-65AG8: 20.3 kg

KD-55AG8: 17.6 kg

*1 Not all the TV sets have DVB-T2 or DVB-S/S2

technology or satellite antenna terminal.

*2 When 4096 × 2160p is input and [Wide mode] is

set to [Normal], the resolution is displayed as

3840 × 2160p. To display 4096 × 2160p, set

[Wide mode] setting to [Full 1] or [Full 2].

*3 HDMI IN 2/3 only. To support 18 Gbps, set [HDMI

signal format] to [Enhanced format].

*4 Refer to the Help Guide for details.

*5 Only on limited region/country/TV model.

*6 Energy consumption in kWh per year, based on

the power consumption of the television

operating 4 hours per day for 365 days.

The actual energy consumption will depend on

how the television is used.

*7 Specified standby power is reached after the TV

finishes necessary internal processes.

*8 Standby power consumption will increase when

your TV is connected to the network.

Note

• Optional accessories availability depends on

countries/region/TV model/stock.

• Design and specifications are subject to change

without notice.

• Do not remove the dummy card or cover (availability

de

pends on TV model) from TV CAM (Conditional

Access Module) slot other than to insert a smart card

fitted in CAM.

Notes on Digital TV function

• Digital TV (DVB terrestrial, satellite and

cable), interactive services and network

functions may not be available in all

countries or areas. Some functions might

not be enabled or might not operate

correctly with some providers and network

environments. Some TV service providers

may charge a fee for their services.

• This TV supports digital broadcasting using

MPE

G-2, H.264/MPEG-4 AVC and H.265/

HEVC codecs, but compatibility with all

operator/service signals, which may

change over time, cannot be guaranteed.

Trademark Information

• The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI Logo

are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc. in the

United States and other countries.

• Dolby, Dolby Vision, Dolby Audio, and the

doubl

e-D symbol are trademarks of Dolby

Laboratories. Manufactured under license

from Dolby Laboratories. Confidential

•“BRAVIA”, and BRAVIA Sync are

trademarks or registered marks of Sony

C

orporation.

• Gracenote, the Gracenote logo and

logo

type, “Powered by Gracenote” logo are

either registered trademarks or trademarks

of Gracenote, Inc. in the United States and/

or other countries.

S

• Google, Google Play, Chromecast,

Y

ouTube, Android TV and other related

marks and logos are trademarks of Google

LLC.

• Wi-Fi®, Wi-Fi Alliance®, Wi-Fi Direct® and

Mir

acast® are registered trademarks of Wi-

Fi Alliance.

• The Wi-Fi CERTIFIED™ Logo is a

c

ertification mark of Wi-Fi Alliance.

• For DTS patents, see http://

pa

tents.dts.com. Manufactured under

license from DTS, Inc. DTS, the Symbol, &

DTS and the Symbol together are

registered trademarks, and DTS Digital

Surround is a trademark of DTS, Inc. © DTS,

• The Bluetooth® word mark and logos are

r

egistered trademarks owned by the

Bluetooth SIG, Inc. and any use of such

marks by Sony Corporation is under

license. Other trademarks and trade names

are those of their respective owners.

• Netflix is a registered trademark of Netflix,

In

c.

• DiSEqC™ is a trademark of EUTELSAT. This

TV

supports DiSEqC 1.0. This TV is not

intended for controlling motorized

antennas.

• TUXERA is a registered trademark of Tuxera

I

nc. in the US and other countries.

17

GB

• USB-IF SuperSpeed USB Trident logo is a

registered trademark of USB Implementers

Forum, Inc.

• All other trademarks are the property of

their respective owners.

2

FR

Table des matières

AVIS IMPORTANT. . . . . . . . . . . . . . . . . . . . . . . 2

Consignes de sécurité . . . . . . . . . . . . . . . . . . 3

Protection de l’écran du téléviseur

(Téléviseur OLED) . . . . . . . . . . . . . . . . . . . . . .4

Pièces et commandes . . . . . . . . . . . . . . . . 5

Commandes et voyants . . . . . . . . . . . . . . . . . 5

Utilisation de la télécommande . . . . . . . . 6

Description des pièces de la

télécommande . . . . . . . . . . . . . . . . . . . . . . . .6

Schéma de connexion . . . . . . . . . . . . . . . . 8

Utilisation de la barre de son

(non fournie). . . . . . . . . . . . . . . . . . . . . . . .11

Installation du téléviseur au mur . . . . . . 12

Utilisation du Support de fixation murale

en option (SU-WL850 ou SU-WL450) . . . . . 12

Dépannage . . . . . . . . . . . . . . . . . . . . . . . . 13

Problèmes et solutions . . . . . . . . . . . . . . . . 13

Spécifications . . . . . . . . . . . . . . . . . . . . . . 15

Introduction

Sony vous remercie d’avoir choisi ce téléviseur.

Avant de l’utiliser, nous vous invitons à lire attentivement ce

manuel et à le conserver pour vous y référer ultérieurement.

Remarque

• Avant d’utiliser le téléviseur, lisez les « Consignes de sécurité »

(page

3).

• Veuillez lire les Consignes de sécurité fournies pour plus

d’informations sur la sécurité.

• Les images et illustrations reprises dans ce manuel et dans le

Guide d’installation sont fournies pour référence uniquement et

peuvent présenter des différences par rapport au produit

proprement dit.

Emplacement de l’étiquette d’identification

Les étiquettes reprenant le numéro de modèle, la date de

production (année/mois) et les caractéristiques nominales de

l’alimentation se trouvent à l’arrière du téléviseur ou de

l’emballage.

Avis concernant les

équipements radio

Le soussigné, Sony Visual Products Inc.,

déclare que les équipements radioélectriques de type

KD-65AG8, KD-55AG8 sont conformes à la directive 2014/53/UE.

Le texte complet de la déclaration UE de conformité est

disponible à l’adresse internet suivante :

http://www.compliance.sony.de/

Avis aux clients : les informations suivantes s’appliquent

uniquement aux appareils vendus dans les pays qui appliquent

les directives de l’UE.

Pour cet équipement radio, les restrictions de mise en service ou

d

e demandes d’autorisation d’utilisation suivantes s’appliquent

en AT, BE, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT,

NL, PL, PT, SK, SI, ES, SE, UK, IS, LI, NO, CH, BG, RO, TR, AL, BA, MK,

MD, RS, ME, Kosovo :

La bande 5 150-5 350 MHz est limitée aux utilisations en intérieur

u

niquement.

Pour attacher le support

de table, reportez-vous au

Gui

de d’installation.

Connexion Internet et confidentialité des données

Ce produit se connecte à Internet au cours de la configuration

initiale dès qu’un réseau est connecté afin de confirmer la

connexion Internet, puis ultérieurement pour configurer l’écran

d’accueil. Votre adresse IP est utilisée dans ces connexions

Internet et toutes les autres. Si vous ne voulez pas que votre

adresse IP soit utilisée, ne configurez pas la fonction Internet

sans fil et ne connectez pas de câble Internet. Veuillez vous

référer aux informations de confidentialité présentées dans les

écrans de configuration pour en savoir plus sur les connexions

Internet.

Aide

Vous trouverez des renseignements supplémentaires sur le

dépannage et d’autres informations utiles directement sur

votre téléviseur. Appuyez sur HELP sur la télécommande pour

afficher une liste de thèmes ou cherchez par mot-clé.

Guide d’aide (Manuel)

Pour obtenir des informations supplémentaires, sélectionnez

[Guide d'aide] du menu Aide sur votre téléviseur. Vous pouvez

également consulter le Guide d’aide depuis votre PC ou

smartphone (informations fournies sur le cache arrière de ce

manuel).

AVIS IMPORTANT

3

FR

Installation/Mise en place

Installez et utilisez le téléviseur conformément aux instructions

ci-dessous afin d’éviter tout risque d’incendie, d’électrocution ou

autre dommage et/ou blessure.

Installation

• Le téléviseur doit être installé à proximité d’une prise de courant

aisément accessible.

• Positionnez le téléviseur sur une surface stable et horizontale

afin d'éviter qu'il ne tombe, n'entraîne des blessures ou

n'endommage des biens.

• Installez le téléviseur dans un endroit où vous ne risquez pas de

le p

ousser, de le tirer ou de le renverser.

• Installez le téléviseur de façon à ce que son support de table ne

dépasse pas du support TV (non fourni). Si le support de table

dépasse du support TV, le téléviseur risque d’être renversé, de

tomber, d’être endommagé ou de provoquer des blessures.

• L’installation murale du téléviseur doit être confiée à un

t

echnicien spécialisé.

• Pour des raisons de sécurité, il est vivement recommandé

d’utiliser les accessoires Sony, notamment :

 S

upport de fixation murale SU-WL850

 Support de fixation murale SU-WL450

• Veillez à bien utiliser les vis fournies avec le Support de fixation

murale lors de la mise en place du Support de fixation murale

sur le téléviseur. Les vis fournies sont conçues de la manière

illustrée, mesurées à partir de la surface de fixation du Support

de fixation murale.

Leur diamètre et leur longueur varient suivant le modèle de

S

upport de fixation murale.

L’utilisation de vis autres que celles fournies peut occasionner

des dégâts à l’intérieur du téléviseur ou provoquer sa chute, etc.

Transport

• Avant de transporter le téléviseur, débranchez tous ses câbles.

• La présence de deux ou trois personnes est nécessaire pour le

transport des téléviseurs de grande taille.

• Pour transporter le téléviseur à la main, saisissez-le de la

manière illustrée. N’exercez aucune pression sur le panneau et

le cadre qui l’entoure.

• Lors de la manipulation ou du

mo

ntage du téléviseur, ne

couchez pas le téléviseur.

• Lorsque vous transportez le téléviseur, ne le soumettez pas à

d

es secousses ou des vibrations excessives.

• Lorsque vous transportez le téléviseur pour le porter à réparer

ou lorsque vous déménagez, glissez-le dans son emballage et

son carton d’origine.

Prévention des basculements

Consignes de sécurité

Vis (M6)

Support de fixation murale

8 mm - 12 mm

Couvercle arrière du téléviseur

Vis M6 (non fournie)

Cordon

(non fourni)

Vis (non fournie)

8 mm - 12 mm

1,5 N∙m

{15 kgf∙cm}

4

FR

Précautions à prendre pour protéger l’écran

des dommages

Rémanence d’image

Les téléviseurs OLED sont sensibles à la rémanence d’image en

raison des caractéristiques des matériaux utilisés. La rémanence

d’image peut survenir si des images s’affichent plusieurs fois au

même emplacement sur l’écran ou pendant des périodes

prolongées. Il ne s’agit pas d’un dysfonctionnement du téléviseur.

Évitez d’afficher des images pouvant causer une rémanence

d’image.

Voici des exemples d’images pouvant causer une

rémanence d’image :

• Contenu avec des bandes noires en haut et en bas et/ou sur la

gauche et la droite de l’écran. (ex : écran 4:3 « letterboxé »,

définition Standard)

• Images statiques, comme des photos.

• Jeux vidéo pouvant avoir un contenu statique sur une partie de

l’

écran.

• Menus à l’écran, guides des programmes, logos des chaînes,

etc.

• Contenu statique des applications.

• Téléscripteurs à l’écran, comme ceux utilisés dans les journaux

télévisés et les titres.

Pour réduire le risque de rémanence d’image :

• Sony vous recommande de mettre le téléviseur hors tension

normalement en appuyant sur le bouton marche de la

télécommande ou du téléviseur.

• Remplissez l’écran en modifiant [Mode Large] pour éliminer les

bandes noires. Sélectionnez un [Mode Large] autre que [4:3].

• Désactivez l’OSD (affichage sur écran) en appuyant sur le

bo

uton / puis désactivez les menus de l’appareil

raccordé. Pour plus de détails, reportez-vous au mode d’emploi

de l’appareil raccordé.

• Évitez d’afficher des images statiques aux couleurs vives (y

compris du blanc), des horloges ou des logos sur une partie de

l’écran.

• Configurez les réglages de l’image en fonction des conditions

am

biantes. L’image Standard est recommandée pour un usage

domestique et lors de la visualisation d’un contenu affichant

souvent les logos de la station, etc.

Le téléviseur possède les fonctionnalités suivantes pour aider à

r

éduire/empêcher la rémanence d’image.

Actualisation du panneau

L’actualisation du panneau s’exécute automatiquement pour

ajuster l’uniformité de l’écran du téléviseur après qu’il a été utilisé

pendant de longues périodes. L’actualisation du panneau peut

également être effectuée manuellement et ne doit être utilisée

que si la rémanence d’image est très visible ou si vous voyez le

message suivant : [L'actualisation du panneau ne s'est pas

terminée…]

Attention :

• La fonction Actualisation du panneau peut affecter le panneau.

En guise de référence, effectuez l’actualisation du panneau une

seule fois par an et pas plus, car elle peut réduire la durée de vie

du panneau.

• L’actualisation du panneau dure environ une heure.

• Une ligne blanche peut s’afficher sur l’écran lors de

l

’actualisation du panneau ; il ne s’agit pas d’un

dysfonctionnement du téléviseur.

• L’actualisation du panneau ne fonctionne que lorsque la

te

mpérature ambiante est comprise entre 10 ºC et 40 ºC.

Décalage des pixels

Place automatiquement l’image sur l’écran pour empêcher la

rémanence d’image.

Autre fonctionnalité

La luminosité de l’écran est automatiquement réduite lors de

l’affichage d’images fixes, d’horloges, de couleurs vives ou de

logos, etc.

Protection de l’écran du téléviseur

(Téléviseur OLED)

La pagina sta caricando ...

Sony KD-55AG8 Guida di riferimento

Questo manuale è adatto anche per

Sony KD-55AG8 Guida di riferimento

in altre lingue

Documenti correlati

Altri documenti