Gigaset A475A DUO BLACK Manuale del proprietario
- Categoria
- Segreterie telefoniche
- Tipo
- Manuale del proprietario
Questo manuale è adatto anche per
1
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Gigaset A475/A475A
The handset at a glance
1 Charge status of the batteries
2 Answering machine icon
(A475A only)
3 Signal strength
4Display keys
5 End call key and On/Off key
6 Talk key/Handsfree key
7 Control key (
p)
ª Audio settings
INT Internal call
â
Directory
|
Muting during a call
8 Key 1
Open the answering machine
(A475A only)/network mailbox
9 Star key
Ringers on/off (press and hold);
with an open connection:
switch from pulse dialling to
tone dialling (press briefly)
10 Key 0/recall key
Consultation call (flash): press
and hold
11 Hash key
Keypad lock on/off (press and
hold); toggles between upper/
lower case and digits; inserts a
dialling pause (press and hold)
12 Microphone
Handset display keys:
Pressing a key launches the function
that appears above that key in the dis-
play.
Please note
New messages in the calls list/
answering machine list/network
mailbox list are indicated in the dis-
play by the message New mes-
sages, the left display key flashes (if
set
¢ page 9).
Display Function when pressed
’
Open calls list (¢ page 9).
§Menu§
Open main/submenu
(see menu overview
¢ page 21).
”
Go back one menu level.
Y
Scroll up/down or adjust vol-
ume with
q
.
X
Move cursor to left/right
with
r.
Ü
Backspace deletes one
character at a time.
§OK§
Confirm menu function or
save entry.
Ð
Ã
U
INT 1
23.04. 10:53
‘
Menu
1
2
3
4
5
6
7
8
9
10
11
12
The base station at a glance
Basis A475A
Basis A475
5
3
2
1
4
6
1
1 Registration/Paging key:
Search for handsets (press briefly, paging
¢ page 12).
Register handsets (press and hold
¢ page 12).
2 Volume keys: (– = quieter; + = louder)
During message playback: adjust the speaking volume.
While the phone is ringing: adjust the ringer melody volume.
3 Play/Stop key:
Switch answering machine on and off (press and hold);
play back new messages from answering machine (press briefly);
during message playback: cancel playback (press briefly).
Lights up: answering machine is activated.
Flashes: at least one new message is present or message is played
back or being recorded.
Flashes very quickly: memory is full.
During message playback:
4 Skip to the start of the current message (press once) or go to the pre-
vious message (press twice).
5Go to the next message.
6 Delete current message.
2
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Safety precautions
ECO DECT
During a call, the transmission power is automatically adjusted to the distance between handset and base station,
the smaller the distance, the lower the transmission power (radiation). In idle status the transmission power of the
handset is switched off. Only the base station ensures contact with the handset using low radio signals.
Your phone offers you the opportunity to further reduce the transmission power:
1) Reducing transmission power (eco mode)
If the setting Max. Range is switched to off (menu tree
¢ page 22), the transmission power in standby mode and
during a call is reduced up to 80% at half range.
2) Deactivating transmission power (eco mode+)
With the setting No Rad
iation (menu tree ¢ page 22), you turn off the transmission power of the base station in
standby mode completely. Please note:
◆ All registered handsets must support this feature.
◆ For quick connection of incoming calls the handset repeatedly switches to reception mode for short periods.
This increases energy consumption and therefore reduces the standby and talk times.
Read the safety precautions and the user guide before use.
T
he device cannot be used in the event of a power failure. In case of a power failure it is also not possible to
make emergency calls.
Emergency numbers cannot be dialled if the keypad/display lock is activated!
Use only rechargeable batteries that correspond to the specification (see list of permitted batteries
www.gigaset.com/service
). Never use a conventional (non-rechargeable) battery or other battery types as
this could result in significant health risks and personal injury. Rechargeable batteries, which are noticeably
damaged, must be replaced.
The handset must not be operated if the battery cover is open.
Do not use the devices in environments with a potential explosion hazard (e.g. paint shops).
The devices are not splashproof. For this reason do not i
nstall them in a damp environment such as bathrooms
or shower rooms.
Use only the power adapter indicated on the device.
Whi
lst charging, the power socket must be easily accessible.
Remove faulty devices from use or have them repaired by our Service team, as these could interfere with other
wi
reless services.
Do not use the device if the display is cracked or broken. Broken glass or plastic can cause injury to hands and
face
. Send the device to our Service department to be repaired.
Do not hold the rear of the handset to your ear when it is ri
nging or when speaker mode is activated. Otherwise
you risk serious and permanent damage to your hearing.
The phone may cause interference in analogue hearing aids (humming or whistling) or cause them to overload.
If you require assistance, please contact the hearing aid supplier.
Using your telephone may affect nearby medical equipment. Be aware of the technical conditions in your
par
ticular environment, e.g. doctor's surgery. If you use a medical device (e.g. a pacemaker), please contact the
device manufacturer. They will be able to advise you regarding the susceptibility of the device to external
sources of high frequency energy (for the specifications of your Gigaset product see "Specifications").
3
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
First steps
Check the package contents
Base station and handset package: One Gigaset handset, one Gigaset A475/A475A base station, one mains adapter,
one phone cord, two batteries, one battery cover, one user guide.
Handset and charging cradle package: One Gi
gaset handset, one charging cradle with mains adapter, two batteries,
one battery cover, one user guide.
If you have purchased a model w
ith multiple handsets, the package should contain two batteries, a battery cover and
a charging cradle with mains adapter for each additional handset.
Setting up the base station and charging cradle (if included)
The base station and charging cradle are designed for use in enclosed dry rooms with a temperature range of +5 °C to
+45 °C.
¤ Set up the base station at a central location on a flat, non-slip surface in your house or apartment. You can also
mount the base station and charging cradle on the wall.
The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and
po
lishes used on today's furnishings, the occurrence of marks on the surfaces cannot be completely ruled out.
Care: W
ipe down the base station, the charging cradle and the handset with a damp cloth (no solvents) or an antistatic
cloth. Never use a dry cloth. This can cause static.
Please note:
◆ Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices.
◆ Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
Connecting the base station
Please note
Pay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m
inside buildings.
¤ First connect the mains adapter 1.
¤ Then connect the telephone jack 2 and insert the
cables into the cable ducts.
Please note:
◆ The mains adapter must always be connected, as the
phone will not operate without mains connection.
◆ Only use the mains adapter and phone cord supplied.
Pin connections on telephone cables can vary.
◆ The answering machine (A475A only) is ready for use
approx. 30 seconds after the base station has been con-
nected.
A475A
A475
1
2
1
1
1
2
1
1
4
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Connecting the charging cradle (if included)
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries and closing the battery cover
Initial charging and discha
rging of the batteries
The correct charge status can only be displayed if the batteries are first fully charged and discharged.
Warning
Use only the rechargeable ba
tteries recommended by Gigaset Communications GmbH (¢ page 17), i.e., never use
conventional (non-rechargeable) batteries as this could resul
t in significant health risks and personal injury. For
example, the batteries could explode. The phone could also malfunction or be damaged as a result of using batter-
ies that are not of the recommended type.
¤ Connect the flat plug from the power
supply
1.
¤ Plug the mains adapter into the plug
socket
2.
If you need to disconnect the plug from the
charging cradle, press the release button
3
and disconnect the plug
4.
1
2
3
4
¤ Insert the batteries
with the polarity in the
correct direction.
The polarity is indicated in
the battery compartment.
¤ Insert the battery cover from
the top.
¤ Then slide the cover upwards
until it clicks into place.
To open the battery cover, for instance to
replace the batteries:
¤ Reach into the notch at the top of the
cover and slide the cover down-
wards.
6 h
¤ Charge the handset in the base station/charging cradle
for 6 hours.
¤ After charging, remove the handset from the base sta-
tion/charging cradle and only replace it when the batter-
ies are fully discharged.
Please note
The handset must only be placed in the designated
Gigaset base station or charging cradle.
5
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Changing the display language
Change the display language if you do not understand the language currently set:
§Menu§ ¤
421
(press the keys one after the other) ¤ q (select language) ¤ §OK§ (‰ = current language)
¤ Press and hold the end call key a to return to idle status.
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be
used.
§Menu§ ¤ q Settings ¤ §OK§ ¤ Date/Time ¤ §OK§ ¤ Date ¤ ~ (enter the day, month and year in 6-digit format)
¤ §OK§ ¤ Time ¤ ~ (enter hours and minutes in 4-digit format) ¤ §OK§ (display message: Saved)
¤ a (press and hold to return to idle status).
You can move the position of an entry to the left or
right by pressing the control key left or right r.
Display in idle status
Once the phone is registered and the time set, the idle status is shown as in this example.
Screen display
◆ Reception between the base station and the handset:
- Good to poor:
Ð ¨ § ¦
- No reception:
¥
◆ Activating the answering machine (A475A only):
- ± Y
our answering machine is activated.
◆ Battery charge status:
-
U Charged over 66%
-
V Charged between 34% and 66%
-
e Charged between 11% and 33%
-
= Charged less than 11%
-
= Flashes: batteries almost empty (less than 10 minutes talktime)
-
= e V U Batteries are charging
If No Radia
tion mode (¢ page 22) is activated, the ½ icon is displayed in the top left.
Please note
◆ Base station and handset package: The handset is pre-registered with the base station. If you have purchased
a model with multiple handsets, all handsets will already be registered with the base station. You do not need
to register the handset again.
However, if a handset is not registered with the base station (Re
gister HS or Put into base is displayed), please
register the handset manually (
¢ page 12).
Handset and charging cradle package: pl
ease register the handset manually (¢ page 12).
◆ After the first battery charge and discharge, you may place your handset in the charger after every call.
◆ Always repeat the charging and discharging procedure if you remove the batteries from the handset and rein-
sert them.
◆ The batteries may warm up during charging. This is not dangerous.
◆ After a while, the charge capacity of the batteries will decrease for technical reasons.
Please note
If your phone receives the date and time during calling lin
e display (e.g., via your network provider, a router or
PABXs), you can specify whether this data should be copied to your phone:
¤ Press the key sequence: §Menu§ ¤ P#Q5#MI
The following is displayed; the current setting flashes:
¤ Press one of the following keys to specify, when this data should be copied to your phone:
Q Never
or
1 Once, in case the date/time is not set on your phone
or
2 Always
Your selection is displayed (e.g., 2):
¤ Press the display key §OK§.
973 SET:
[
0
]
973 SET:
[2]
Ð
Ã
U
INT 1
23.04. 10:53
‘
Menu
6
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Activating/deactivating the handset
Press and hold the a key to activate or deactivate the handset. If you place a deactivated handset in the base station
or charging cradle, it will automatically activate after approx. 30 seconds.
Your phone is now
ready for use.
If you have any questions about using your phone
, please read the tips on troubleshooting ("Questions and answers",
¢ page 18) or contact our Customer Care team ¢ page 20.
Menu guidance
Your telephone's functions are accessed via a menu consisting of several levels (menu overview ¢ page 21).
Main menu (first menu level)
¤
When the handset is in idle status, press the display key §Menu§ or right on the control key v to open the main menu.
The functions in the main menu are shown by means of an icon and th
e function's name.
Selecting a function:
¤ You can scroll between functions using the control key q. The function is shown in the display.
¤ Press the display key §OK§ or the right control key vto select the displayed function. This opens the corresponding
submenu and the first entry is displayed.
If you press the display key
” or briefly the end call key a, the display returns to idle status.
Submenus
The functions in the submenu are indicated by name.
Selecting a function:
¤ You can scroll between functions using the control key q. The function is shown in the display.
¤ Press the display key §OK§ to select the displayed function. This opens the corresponding submenu and the first entry
is displayed.
If you press the display key
” or briefly the end call key a, the display returns to the previous menu level or you cancel
the operation.
Any settings you have not confirmed by pressing the display key
§OK§ are lost.
Reverting to idle status
From any point in the menu:
¤ Press and hold the end call key a or
¤ Do not press any key: after 2 minutes, the display will automatically revert to idle status.
Making calls
Making external calls and ending calls
External calls are calls using the public telephone network.
~
(Enter the phone number) ¤ c.
The phone number is dialled. (Or you can firs
t press and hold talk key c [dial tone] and then enter the number.) During
the call you can adjust the earpiece volume using
t and set the volume with q.
End the call/cancel dialling: P
ress the end call key a.
You can automatically insert a network provider dialling code before any phone number (
¢ page 7).
Accepting a call
The handset indicates an incoming call by ringing and by a display on the screen.
Press the talk key
c to accept the call.
When Au
to Answer is activated (see menu overview ¢ page 22), simply remove the handset from the base station/
charging cradle.
Calling Line Identification
When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is
stored in the directory.
Prerequisites:
1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen.
2 The caller has asked the network provider for his number to be identified (CLI).
External Call appears in the display if you have not requested CLIP, Wi
thheld appears if the caller has withheld CLI, and
Unavailable appears if CLI has not been requested.
7
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Handsfree operation
In handsfree mode, you activate the loudspeaker so that you can hear the caller without having to hold the handset to
your ear. During a call and when listening to the answering machine (Gigaset A475A only) you can activate or deactivate
handsfree mode by pressing the handsfree key
d.
During the call in handsfree mode you can adju
st the handsfree volume by pressing t and set the volume with q.
Muting
You can deactivate your handset's microphone during a call. Press the right control key v to mute the handset. Press
the control key
v again to reactivate the microphone.
Automatic network provider preselection
You can store a call-by-call number (preselection number), which is automatically placed in front of numbers when you
dial them. If, for example, you wish to make international calls via special network providers, you can save the relevant
dialling code here.
In the "W
ith Preselect" list, specify the dialling codes or the first digits of the dialling codes that you wish to assign to the
preselection number.
In the "W
ithout Presel." list, enter any exceptions to the "With Preselect" list.
Enter preselection number via menu (
¢ page 22).
Permanently deactivating preselection: D
elete the preselection number with Ü.
Temporarily cancelling preselection:
(press and hold)
¤ §Menu§ ¤ q Preselect off ¤ §OK§ ¤ ~ (enter number) or s (use number from directory) ¤ The
number is dialled without Preselection.
Using the directory and lists
Directory
To open the directory: press control key s.
You can save up to 10
0 phone numbers (max. 22 digits) with corresponding names (max. 16 characters).
Enter letters/characters
¢ page 16.
Storing the first number in the directory
s
¤ New Entry? ¤ §OK§ ¤ ~ (enter number) ¤ §OK§ ¤ ~ (enter name) ¤ §OK§
Storing further numbers in the directory
s
¤ §Menu§ ¤ New Entry ¤ §OK§ ¤ ~ (enter number) ¤ §OK§ ¤ ~ (enter name) ¤ §OK§
Selecting a directory entry
Open the directory with s. You have the following options:
◆ Use q to scroll through the entries until the required name is selected.
◆ Enter the first character of the name and scroll to the entry with q, if required.
Example:
Presel. Number 0999
With Preselect 08
Without Presel. 081
084
Phone number Dialled number
07112345678
¤ 07112345678
08912345678
¤ 0999 08912345678
08412345678
¤ 08412345678
All numbers that start with 08, except
for 081 and 084, are dialled with the
preselection number 0999.
c
8
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Dialling with the directory
s ¤ q (select entry) ¤ c
Using other functions
s ¤ q (select entry) ¤ §Menu§
The following functions can be selected with q:
Using shortcut keys
You can assign directory entries to the keys 2–9:
s ¤ q (select entry) ¤ §Menu§ ¤ q Shortcut ¤ §OK§
¤ q (select key) ¤ §OK§ or ~ (press the key you want to assign the entry to)
To dial, pr
ess and hold the required shortcut key.
Sending the directory to another handset
Prerequisites:
◆ The sending and receiving handsets must both be registered to the same base station.
◆ The other handset and the base station can send and receive directory entries.
s ¤ q (select entry) ¤ §Menu§ ¤ q Send Entry / Send List ¤ §OK§
¤ q (Select the internal party) ¤ §OK§ or ¤ ~ (enter the internal number of the receiving handset)
Last number redial list
This list contains the ten last dialled numbers.
Dialling from the last number redial list
c
(press briefly) ¤ q (select entry) ¤ c
Managing entries in the last number redial list
c
(press briefly) ¤ q (select entry) ¤ §Menu§
You can select the following settings:
New Entry Save new phone number.
Show Number Display the phone number.
Show Name Display the name.
Edit Entry Edit selected entry.
Use Number Edit the number or open the directory by pressing the control key s to insert a number from the
directory at the current position. Then dial or use other functions with
§Menu§.
Delete Entry Delete selected entry.
Send Entry Send a single entry to another handset (¢ page 8).
Delete List Delete all directory entries.
Send List Send the complete list to another handset (¢ page 8).
Shortcut For shortcuts, assign the current entry to a key.
Use Number Edit the number or open the directory by pressing the control key s to insert a number from the
directory at the current position. Then dial or use other functions with
§Menu§.
Copy to Dir. Copy an entry to the directory.
Delete Entry Delete selected entry.
Delete List Delete all entries.
9
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Calls list/answering machine list/network mailbox list
Press the display key ’ , to open the list overview. If you have new messages, only lists with new messages are dis-
played. Scroll through the lists by pressing
q.
An advisory tone sounds as soon
as a new entry appears in the calls list/answering machine list/network mailbox list.
By default the left display key flashes and the message New messages appears on the display. You can change this
behaviour by using the following procedures:
¤ Press the key sequence: §Menu§ ¤ P#Q5#M
The following is displayed:
¤ Press one of the following keys to select the message type:
5 for missed calls
or
M for messages on the answering machine ( A475A only)/network mailbox
Your selection is displayed (e.g., 5 f
or missed calls); the current setting flashes:
Press key
Q or 1, to set the behaviour for new messages:
Q The presence of new messages is displayed (default setting).
or
1 The presence of new messages is not displayed.
Your selection is displayed (e.g., 1):
¤ Press the display key §OK§.
Settings will only be changed once a new message has been received.
Calls list
Prerequisite: CLIP (¢ page 6)
Depending on the type of list set,
the calls list contains (¢ page 22):
◆ Answered calls
◆ Missed calls
◆ Calls recorded from the answering machine (A475A only)
Depending on the type of list set, all numbe
rs of the last 25 incoming calls are saved or just the missed calls are saved.
Open the calls list
’ ¤ q CallsList
The calls list is displayed as follows:
Number of new entries + number
of old, read entries
Press
§OK§ to open the list.
The last incoming call is displayed. If necessary, use
q to select another entry.
Using other functions
q (select entry) ¤ §Menu§
The following functions can be selected with q:
Calling back a caller from the calls list
’ ¤ q CallsList 01+02 ¤ §OK§ ¤ q (select entry) ¤ c
Answering machine list (A475A only) /Network mailbox list
You can use these lists to listen to messages on the answering machine (see "Playing back/deleting messages"
¢ page 10) or network mailbox (¢ page 12).
Please note
When calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made
(
depending on your network provider).
Delete Entry Delete current entry.
Copy to Dir. Copy an entry to the directory.
Date/Time Call date and time (if set).
Status New Call: new missed call. Old Call: entry already read.
Delete List Warning! All old and new entries will be deleted.
97
975 SET:
[
0
]
975 SET:
[
1
]
CallsList 01+02
10
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Operating the answering machine (A475A only)
The answering machine is operated via the handset or via the keys on the base station. Information on operating the
answering machine via the keys on the base station (
¢ page 1). The following sections describe operation via the hand-
set.
You can record your own announcement messages using the hand
set. The pre-recorded announcement is used, if no
personal announcement is available.
If the memory is full, Answ
er M.full! appears in the display and the answering machine switches itself off automatically.
It activates again automatically when you delete old messages.
The answering machine has already been preset at the factory. Make individual settings using the handset.
How to set a dela
y time, after which the answering machine is to answer a call, as well as how to set the recording length
and activate call screening during the recording, see menu overview (
¢ page 21).
Activating/deactivating the answering machine
§Menu§ ¤ q Answer Machine ¤ §OK§ ¤ q Answ. Mach. ¤ §OK§ (
‰
= on)
When you switch on the answering machine, the
± icon appears in the display.
Recording your own announcement
§Menu§ ¤ q Answer Machine ¤ §OK§ ¤ q Announcements ¤ §OK§ ¤ Rec announce. ¤ §OK§ ¤ Start recording? ¤ §OK§
You hear the ready tone (short tone). Now speak your announcement (at least 3 sec.). Press §OK§ to confirm or press a
or
” to reject your recording. After recording, the announcement is played back for you to check.
Please note:
Recording ends automatically when the max. recording time of 170 seconds is reached or if there is a break in speaking
of mor
e than 2 seconds.
Playing back or deleting announcements
See menu overview ¢ page 21.
Playing back/deleting messages
There are three ways to start playing back messages on the answering machine.
◆ Start message playback via the Answer Machine menu:
§Menu§ ¤ q Answer Machine ¤ §OK§ ¤ q Play Messages ¤ §OK§
If you have entered a number for the network mailbox you still need to select the answering machine:
¤ q Answ. Mach. ¤ §OK§
◆ Start message playback via the answering machine list:
’ ¤ q Answer M.
The list is displayed as follows:
Number of new messages + number of old, played back messages
Press
§OK§ to open the list.
¤ Fast access to the answering machine:
To access the answering machine, simply press and hold the
1 key. The integrated answering machine has already
been preset at the factory. However, if you have set the network mailbox for fast access, you can change this setting
(
¢ page 21).
If you have new messages, playback will start with the
first new message, otherwise with the first old message.
The loudspeaker on the handset switche
s on automatically. To switch it off, press the handsfree key d.
Messages consist of
◆ the message header (number/date/time) and
◆ the message body (recorded text).
The header is played back first, then the body. The phone number or the name is displayed.
Answer M.01+02
11
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Stopping and controlling playback
Controlling playback depends on the point in time at which the corresponding key is pressed.
During message playback:
Additional functions during message playback
Press the display key §Menu§. Playback stops.
Select the relevant function using
q:
Deleting an individual message
During playback: Press key
Q or the display key Ü .
New messages can
only be deleted during playback of message body.
Deleting all old messages
During playback or when paused:
§Menu§ ¤ q Delete all old ¤ §OK§ (Confirm the security prompt)
Accepting a call from the answering machine
You can accept a call while the answering machine is recording it:
§Menu§ ¤ Accept ¤ §OK§
You can also accept the call by:
◆ Pressing the talk key c
◆ Removing the handset from the base station/charger (if Auto Answer is activated ¢ page 22)
Recording stops and you can speak to the caller.
Setting a different language
You can change the language for the voice prompt and default announcement.
§Menu§ ¤ q Answer Machine ¤ §§OK§§ ¤ q Language ¤ §§OK§§ ¤ q (select language) ¤ §OK§
Operating when on the move (remote operation)
You can check your answering machine from any other telephone (hotel, pay phone etc.).
Prerequisites:
◆ You have set a system PIN other than 0000 (¢ page 22).
◆ The phone you are using for remote operation has tone dialling (DTMF) i. e., you hear different tones when you press
the keys.
2
Pause playback. Press 2 again to resume.
t or 1
During playback of message header: Go to the start of the previous message. Skipping back from
the first message jumps to the last message.
During playback of message body: G
o to the start of the current message.
s or I
Go to the start of the next message. Skipping forward from the last message jumps to the first mes-
sage.
L
During playback of message header: Skip header.
During playback of message body: G
o to the body of the next message. Skipping forward from the
last message jumps to the first message.
Dial Number Dial number.
Continue Continue message playback.
Volume Setting volume.
Copy to Dir. Copy the caller's number to the directory.
Delete all old Delete all old messages.
Please note
When C
all Screening is activated on the handset and the call can already be heard on the handset, you can only
accept the call via
§Menu§ ¤ Accept ¤ §OK§. Pressing the talk key/handsfree key c only activates or deactivates the
handsfree mode.
12
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Calling the answering machine and playing messages
~ (Dial your own number.) ¤ When you hear your announcement, press 9 and enter the system PIN.
The following keys are used for operation:
Activating the answering machine
~ (Enter your own number and allow the phone to ring until you hear the message, "Please enter your PIN code.")
¤ ~
Enter system PIN
Your answering machine is activated. It tells you how much memor
y time is left. The messages are now played back. The
answering machine cannot be deactivated remotely.
Network mailbox
The network mailbox is the answering machine in your provider's telephone network. More information is available from
your provider. You cannot use the network mailbox unless you have requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list (
¢ page 9), the menu (¢ page 21)
and to use fast access (
¢ page 1), you will need to enter the number in your phone:
§Menu§ ¤ q Answer Machine ¤ §OK§ ¤ q Net Mailbox ¤ ~ (enter number) ¤ §OK§
Locating a handset (paging)
You can locate your handset using the base station.
¤ Briefly press the registration/paging key on the base station (¢ page 1).
All handsets will ring at the same time (paging
), even if the ringers are switched off.
Ending paging: Br
iefly press the registration/paging key on the base station (¢ page 1) or press the talk key c or the
end call key
a on the handset.
Registering handsets manually
You can register up to four handsets on your base station. Each additional handset must be registered on the base sta-
tion in order for it to work properly!
Registration takes approx. 1 minute. Once the re
gistration process has been completed successfully, the display briefly
shows HS registered and returns to idle status. Handsets
are assigned the lowest available internal number (1-4). If the
internal numbers 1–4 are already assigned to other devices, the number 4 will be overwritten.
A
During the number/date/time announcement: Skip to the start of the previous message.
During the message playback: Sk
ip to the start of the current message.
B
Stop playback. Press again to resume.
3
Go to the next message.
0
Delete current message.
1) On the handset
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Register HS ¤ Enter the base station system PIN (default set-
ting: 0000)
¤ §OK§ ¤ Registering is displayed.
2) On the base station
Within 60 seconds, press and ho
ld the registration/paging key on the base station (¢ page 1) for approx. 3 seconds.
(A475A only: There is a tone played if th
e registration mode is activated.)
13
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
De-registering handsets
You can de-register all other registered handsets from each of the registered Gigaset handsets.
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q De-register HS ¤ q Select the internal party you wish to de-
register. The handset you are currently using is indicated by <.
¤ §OK§ ¤ Enter the base station system PIN (default setting:
0000)
¤ §OK§
Using multiple handsets
Making internal calls
Internal calls are free calls to other handsets that are registered to the same base station.
2 handsets are registered
Press the control key u, the other handset is called.
More than 2 handsets are registered
Calling a specific handset
u ¤
~
(1...4, enter internal number of the handset) or
u ¤ q (Select the internal party) ¤ §OK§ or c ¤ the handset is called.
Calling all handsets (group call)
Press and ho
ld u or u ¤ P or u ¤ q Call all ¤ §OK§ or c ¤ all handsets are called.
When a participant answers you can spea
k to him. To end the call, press a.
Internal consultation call/connecting a call
You are in conversation with an external participant. Press the control key u and call one or all handsets. The external
participant hears the hold music. When the internal participant answers: Announce the external call, if necessary.
Either
press the end call key
a. The call is transferred to the internal participant,
or
press the display key
” . You are reconnected with the external participant.
When transferring a call you can also press the end call key
a before the internal participant answers.
Listening in to an external call
You are conducting an external call. An internal participant can listen in on this call and take part in the conversation
(conference). Prerequisite: The Listening in function must be activated.
Activating/deactivating listening in
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Base ¤ §OK§ ¤ q Listening in ¤ §OK§ (‰ = on)
Internal listening in (conference)
You want to listen in to an existing external call. Press and hold the c key. You can listen in to the call. All participants
hear a signal tone.
To end:
press the end call key a. All participants hear a signal tone.
If the fi
rst internal participant presses the end call key a, the handset that has "listened in" remains connected to the
external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
§Menu§ ¤ q Alarm Clock ¤ §OK§ ¤ Activation ¤ §OK§ (‰ = on)
When activated:
¤ ~ (Set the wake-up time) ¤ §OK§
When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon l will
appear on the screen and the wake-up time will be displayed instead of the date.
Setting the wake-up time
§Menu§ ¤ q Alarm Clock ¤ §OK§ ¤ q Wake-upTime ¤ §OK§
Enter the wake-up time in hours and minutes, then press §OK§.
14
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Phone settings
For details on activating/deactivating advisory tones and battery low tones, see menu tree (¢ page 21).
For details on setting th
e display contrast and large dialling numbers, see menu tree (¢ page 22).
For details on how to set the sy
stem PIN on the base station, see the menu overview (¢ page 22).
Changing the display language
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Language ¤ §OK§ ¤ q (select language) ¤ §OK§
The current language is indicated by
‰.
If you accidentally choose a language you do not understand:
§Menu§ ¤
421
(press the keys one after the other) ¤ q (select language) ¤ §OK§
Changing the handsfree/earpiece volume
In idle status:
t ¤ Handset Volume ¤ §OK§ ¤ q Earpiece/Speaker ¤ §OK§ ¤ q (set the volume level 1 to 5)
¤ §OK§ (‰ = selected)
During a conversation via the earpiec
e or in handsfree mode:
t ¤ q (set the volume level 1 to 5)
The setting will automatically be sa
ved after approximately 3 seconds or press the display key §OK§.
You can also set the handsfree/earpiece volume using the menu A
udio Settings (¢ page 21).
Setting the sound of the earpiece
Adapt the sound of the earpiece to your needs.
◆ Low: Standard setting.
◆ High: High frequencies are emphasized.
In idle status:
t ¤ q Handset Sound ¤ §OK§ ¤ q Low/High ¤ §OK§ (‰ = selected)
You can also set the sound of the earpiece using the menu Au
dio Settings (¢ page 21).
Setting ring tones of the handset
Setting the ringer volume
In idle status:
t ¤ q Ringer Volume ¤ §OK§ ¤ q (set the volume level 1 to 5 or "Crescendo") ¤ §OK§ (‰ = selected)
You can also set the call volume using the menu Au
dio Settings (¢ page 21).
Setting the ringer melody
Set different ringer melodies for External Calls, Internal Calls and the Alarm Clock.
In idle status:
t ¤ q Ringer Melody ¤ §OK§ ¤ q External Calls / Internal Calls / Alarm Clock ¤ §OK§ ¤ q (select melody)
¤ §OK§ (‰ = selected)
You can also set the call volume using the menu Au
dio Settings (¢ page 21).
Time Control (day/night mode)
You can specify a time period when you do not want the telephone to signal external calls e.g., during the night.
Activating Time Control:
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Time Control ¤ §OK§ ¤ Activation ¤ §OK§ (‰ = activated)
Setting time period:
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Time Control ¤ §OK§ ¤ q Settings ¤ §OK§
¤ Off from:
~
(Enter time in 4-digit format) ¤ §OK§ ¤ Off until:
~
(Enter time in 4-digit format) ¤ §OK§
Anonymous calls silent
You can set your handset so that it doesn't ring for calls where Calling Line Identification has been withheld. The call will
only be signalled on the display.
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q An.Call Silent ¤ §OK§ (‰ = activated)
15
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Activating/deactivating the ringer
Deactivating/reactivating the ringer permanently
In idle status, press and ho
ld the star key P. If the ringer is deactivated, the
Ú
icon appears in the display.
Deactivating the ringer for the current call
§Menu§ ¤ Silent ¤ §OK§
Setting ring tones of the base station (A475A only)
Set the Ringer Volume, Ringer Melody and the Time Control for the base station:
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Base ¤ §OK§ ¤ Audio Settings ¤ §OK§
¤ q Ringer Volume/Ringer Melody/Time Control
Perform the setting analogously to the description in "Setting ring tones of the handset".
Activating/deactivating music on hold
You can set that your external participant hears music in case of internal recall and during call transfer.
§Menu§ ¤
P#Q5#1M
¤ The number for the current setting flashes: 0 = off; 1 = on ¤ enter number ¤ §OK§.
Repeater mode
With a repeater, you can increase the range of your base station. You will need to activate repeater mode (¢ page 22).
Repeater mode and No Radia
tion mode (¢ page 22) cancel each other out.
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's
registration to the base station will be retained.
§Menu§ ¤ q Settings ¤ §§OK§§ ¤ q Handset ¤ §§OK§§ ¤ q Reset Handset ¤ §§OK§§ ¤ Reset? ¤ §§OK§§
Restoring the base station
When restoring factory settings:
◆ Individual settings are reset.
◆ All lists are deleted.
◆ The No Radiation mode is deactivated.
The date and time are retained. The answering machine (A475A only) i
s ready for use approx. 15 seconds after the base
station has been reset.
Resetting the base station via the menu
When resetting via the menu
◆ Handsets are still registered.
◆ The system PIN is not reset.
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Base ¤ §OK§ ¤ q Base Reset ¤ §OK§ ¤ Reset? ¤ §OK§
Resetting the base station using the key on the base station
When resetting the base station using the key on the base station
◆ All handsets are de-registered and
◆ The system PIN is reset to the original code 0000.
Carry out the following steps:
Remove the mains cable from the base station. Hold down the registration/paging key
on the base station (
¢ page 1) and reconnect the power cable to the base station at the same time. Hold the key down
for at least 5 seconds.
16
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Operating the base station on the PABX/router
Operating on the router
When operating the Gigaset on an analogue port of a router, you can reduce problems with echoing by activating the
XES Mode (
¢ page 22). If you have no problems with echoing, this function should be deactivated.
Operating on the PABX
The following settings are only necessary when your PABX requires them, see the user guide for your PABX.
When entering the digits, enter them slowly one af
ter the other.
Changing the dialling mode
§Menu§ ¤
P#Q5#1N
¤ The number for the set dialling mode flashes: 0 = touch tone dialling (DTMF);
1 = dial pulsing (DP)
¤ enter number ¤ §OK§.
Setting recall
§Menu§ ¤
P#Q5#1Q
¤ The number for the current recall flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; 7 = 800 ms
¤ enter number ¤ §OK§.
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key
c and sending the phone number.
§Menu§ ¤
P#Q5#1L
¤ The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.
¤ enter number ¤ §OK§.
Changing the pause after the recall key
§Menu§ ¤
P#Q5#12
¤ The number for the current pause length flashes: 1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms
¤ enter number ¤ §OK§.
Appendix
Entering letters/characters
Standard characters
Press the relevant key the number of
times indicated.
Briefly pr
ess the hash key # to
switch from "Abc" to "123" mode,
from "123" to "abc" mode and from
"abc" to "Abc" mode.
1) Space
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x
1 1£$¥¤
2 abc2äáàâãç
I def3ëéèê
4 gh i4ïíìî
5 jkl5
L mno6öñóòôõ
M pqr s7ß
N tuv8üúùû
O wx y z 9 ÿ ýæøå
Q .,?!0+-:¿¡"’;_
P
* / ( ) <=>%
#
#@\ &§
1)
17
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Technical Data
Batteries
Technology: Nickel-metal-hydride (NiMH); Size: AAA (Micro, HR03); Voltage: 1,2 V; Capacity: 400 - 1000 mAh
Handset operating times/charging times
Your handset can charge batteries up to a capacity of 1000 mAh. The use of special high-performance batteries or bat-
teries with high capacities is not r
ecommended for cordless phones.
The operating time of your Gigaset depends on the capacity and age of the batteries and the way it is used. (Standby
time
/talk time/operating time are maximum possible values, charging times are typical values.)
Due to the constant progression in battery development, the list of recommended batteries in the FAQ section of the
G
igaset Customer Care pages is regularly updated:
www.gigaset.com/service
General specifications
Capacity (mAh) approx.
450 550 700 800 1000
Standby time (hours) 180 250 285 330 405
Talktime (hours) 14 19 22 25 31
Operating time for 1.5 hrs of calls per day (hours),
No Radiation mode switched
off/on 95/70 130/95 150/110 175/125 215/155
Charging time in base station (hours) 5.0 6.5 7.5 8.5 10.5
Charging time in charger (hours) 4.5 6.0 7.0 8.0 10.0
Base station power consumption
A475 A475A
In standby mode
– Handset in base station
– Handset outside base station
approx. 0.6 W
approx. 0.55 W
approx. 0.7 W
approx. 0.65 W
During a call approx. 0.65 W approx. 0.75 W
DECT standard is supported
GAP standard is supported
Range up to 300 m outdoors, up to 50 m indoors
Base station power supply 230 V ~/50 Hz
Environmental conditions in operation +5 °C to +45 °C, 20% to 75% relative humidity
Radio frequency range 1880-1900 MHz
Transmission power 10 mW average power per channel, 250 mW pulse power
18
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Questions and answers
If you have any queries about the use of your telephone, visit our website at www.gigaset.com/service
for 24-hour support. The table below contains a lis
t of common problems and possible solutions.
Care
Wipe the device with a damp cloth or an antistatic cloth. Do not use solvents or microfibre cloths.
Never use
a dry cloth; this can cause static.
In rare cases, contact with chemical substances can cause changes to the device’s exterior. Due to the wide variety of
ch
emical products available on the market, it was not possible to test all substances.
Impairments in high-gloss finishes can be carefully r
emoved using display polishes for mobile phones.
Contact with liquid
If the handset has come into contact with liquid:
1 S
witch the handset off and remove the battery immediately.
2 Allow the liquid to drain from the handset.
3 Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry,
warm
place for at least 72 hours (not
in a microwave, oven etc.).
4 Do n
ot switch on the handset again until it is completely dry.
When it has fully dried out, you will usually be able to use it again.
Problem Cause Solution
Nothing appears on
th
e display.
The handset is not switched on.
The batteries are flat.
Press the end call key a for approx. 5 seconds or place
the handset in the base station.
Charge or replace the batteries.
No wireless connec-
tion to the base sta-
tion, Ba
se flashes in
the display.
The handset is outside the range of
the ba
se station.
The base station is not turned on.
Move the handset closer to the base station.
Check the mains connector on the base station
¢ page 3.
The display shows
Re
gister HS or Put
into base.
Handset has not been registered
with the base station or has been
de-registered.
Register the handset ¢ page 12.
Handset does not
ri
ng.
The ring tone is deactivated.
The phone only rings if the phone
numb
er has been transferred.
The phone does not ring in a spe-
cific time period.
Activate the ring tone
¢ page 15.
Activate the ring tone for anonymous calls
¢ page 14.
Deactivate the "Time Control" or change the time period
¢ page 14.
You cannot hear a
ri
nger/dialling tone
from the fixed line
network.
The phone cord supplied has not
bee
n used or has been replaced by
a new cord with the wrong jack
connections.
Please always use the phone cord supplied or ensure
th
at the pin connections are correct when purchasing
fr
om a retailer: 3-4 assignment of telephone leads/
EURO CTR37.
Error tone sounds
a
fter system PIN
prompt.
PIN forgotten.
The system PIN you have entered is
in
correct.
Reset the system PIN to the default 0000 ¢ page 15.
All handsets are de-registered. All settings are reset.
A
ll lists are deleted.
19
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
Service (Customer Care)
Step by step towards your solution with Gigaset Customer Care www.gigaset.com/service.
Visit our Customer Care pages
Here you will find:
•Frequently asked questions
•
Free software and user manual downloads
•Compatibility checks
Contact our Customer Care team
Couldn't find a solution in the FAQs section?
We are happy to help...
... online:
via our contact form on the customer service page
... by telephone:
Netherlands 0900-3333102
(1,00 € per call)
Belgium 07815 6679
(local call cost charge)
Please have your proof of purchase ready when calling.
Please note that if the Gigaset product is not sold by authorised dealers in the national territory the product
m
ay not be fully compatible with the national telephone network. It is clearly specified on the box near the
CE mark for which country/countries the equipment has been developed. If the equipment is used in a manner incon-
sistent with this advice or with the instructions of the manual and on the product itself, this may have implications on
the c
onditions for warranty or guarantee claims (repair or exchange of product).
In order to make use of the warranty, the product purchaser is ask
ed to submit a receipt which proves the date of pur-
chase (date from which the warranty period starts) and
the type of goods that have been purchased.
Authorisation
This device is intended for analogue phone lines in the Belgian and Dutch network.
Country-specific requirements have
been taken into consideration.
Hereby, Gigaset Communications GmbH declares that the radio eq
uipment type Gigaset A475/A475A is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity i
s available at the following internet address:
www.gigaset.com/docs.
This declaration could also be available in the "International
Declarations of Conformity" or “European Declarations of
Conformity” files.
Therefore please check all of these files.
Guarantee Certificate
Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be
granted a manufacturer's Guarantee under the conditions set out below:
◆ In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material
faults within 24 months of purchase, Gigaset Communications shall, at its own option and free of charge, either
replace the device with another device reflecting the current state of the art, or repair the said device. In respect of
parts subject to wear and tear (including but not limited to, batteries, keypads, casing), this warranty shall be valid
for six months from the date of purchase.
◆ This Guarantee shall be invalid if the device defect is attributable to improper treatment and/or failure to comply
with information contained in the user guides.
◆ This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer them-
selves (e. g. installation, configuration, software downloads). User guides and any software supplied on a separate
data medium shall be excluded from the Guarantee.
◆ The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee.
Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident.
◆ Ownership of devices or components replaced by and returned to Gigaset Communications shall vest in Gigaset
Communications.
◆ This Guarantee shall apply to new devices purchased in the European Union. The Guarantee is issued by: Gigaset
Communications Nederland BV.
20
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Template Bali, Version 1, 16.02.2012
◆ Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in
this Guarantee shall attempt to limit or exclude a Customers Statutory Rights, nor the manufacturer's liability for
death or personal injury resulting from its negligence.
◆ The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee.
◆ Insofar as no Guarantee default exists, Gigaset Communications reserves the right to charge the customer for
replacement or repair.
◆ The above provisions does not imply a change in the burden of proof to the detriment of the customer.
To invoke this Guarantee, please contact the Gigaset Communications telephone service. The relevant number is to be
found in the accompanying user guide.
Exclusion of liability
Your handset display has a resolution of pixels. Each pixel consists of three sub-pixels (red, green, blue).
It may be the case that a pixel is incorrectly controlled or has a colour deviation.
This is normal and no reason for a warranty claim.
The following table shows the number of pixel errors that ma
y occur without leading to a warranty claim.
Environment
Our environmental mission statement
We, Gigaset Communications GmbH, bear social responsibility and are actively committed to a better world. Our ideas,
technologies and actions serve people, society and the environment. The aim of our global activity is to secure sustain-
able life resources for humanity. We are committed to a respons
ibility for our products that comprises their entire life
cycle. The environmental impact of products, including their manufacture, procurement, distribution, utilisation, service
and disposal, are already evaluated during product and process design.
Further information on environmentally friendly product
s and processes is available on the Internet at
www.gigaset.com.
Environmental management system
Gigaset Communications GmbH is certified pursuant to the international standards ISO 14001 and
ISO 9001.
ISO 14001 (Environment): C
ertified since September 2007 by TÜV SÜD Management Service GmbH.
ISO 9001 (Quality): C
ertified since 17/02/1994 by TÜV SÜD Management Service GmbH.
Disposal
Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of
which can be obtained from your local authority.
All electrical and electronic products should be disposed of separately from the municipal waste stream via designated
co
llection facilities appointed by the government or the local authorities.
This crossed-out wheeled bin symbol
on the product means the product is covered by the European
Directive 2012/19/EU.
The correct disposal and separate collection of your old
appliance will help prevent potential negative
consequences for the environment and human health. It is a precondition for reuse and recycling of used
electrical and electronic equipment.
For more detailed information about disposal of your old appliance, please contact your local council refuse centre or
t
he original supplier of the product.
Description Maximum number of permitted pixel errors
Colour illuminated sub-pixels 1
Dark sub-pixels 1
Total number of coloured and dark sub-pixels 1
Signs of wear on the display and housing are excluded from the warranty.
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
Gigaset A475A DUO BLACK Manuale del proprietario
- Categoria
- Segreterie telefoniche
- Tipo
- Manuale del proprietario
- Questo manuale è adatto anche per