ASROCK H61TM-ITX Guida Rapida

Marca: ASROCK

Modello: H61TM-ITX

Categoria: Schede madri

Tipo: Guida Rapida

ASRock H61TM-ITX Motherboard

English

No part of this installation guide may be reproduced, transcribed, transmitted, or trans-

lated in any language, in any form or by any means, except duplication of documentation

by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identica-

tion or explanation and to the owners’ benet, without intent to infringe.

Disclaimer:

Specications and information contained in this guide are furnished for informational use

only and subject to change without notice, and should not be constructed as a commit-

ment by ASRock. ASRock assumes no responsibility for any errors or omissions that may

appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind,

either expressed or implied, including but not limited to the implied warranties or condi-

tions of merchantability or tness for a particular purpose. In no event shall ASRock, its

directors, ofcers, employees, or agents be liable for any indirect, special, incidental, or

consequential damages (including damages for loss of prots, loss of business, loss of

data, interruption of business and the like), even if ASRock has been advised of the pos-

sibility of such damages arising from any defect or error in the guide or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

Published November 2012

ASRock H61TM-ITX Motherboard

English

Motherboard Layout

Intel

H61

PCIE1

MINI_PCIE1

CMOS

Battery

CHA_FAN1

USB6_7

USB3_0_1

SATA_POW1

LVDS1

DDR3_B1

DDR3_A1

HDLED RESET

PLED PWRBTN

PANEL1

BKT_PWR1

PNL_PWR1

USB4_5

HDMI_SPDIF1

HD_AUDIO1

AUDIO

CODEC

LAN

SATA_0

SATA_1

CPU_FAN1

PLED1

32Mb

BIOS

DMIC1

CLRCMOS1

Front

Speaker

Mic In

USB 2.0

T: USB2

B: USB3

RJ-45

USB 3.0

T: USB0

B: USB1

DC Jack

DVI1

eSATA1

HDMI

CIR1

H61TM-ITX

Front USB 3.0

XFast RAM

RoHS

DDR3

PCI Express 3.0

USB8

HTPC1

BLT_VOL1

COM1

SPEAKER1

HD_AUDIO2

LPC1

Designed in Taipei

8 9

23 22

ASRock H61TM-ITX Motherboard

English

1 Intel H61 Chipset

2 SATA2 Connector (SATA_1)

3 USB 2.0 Header (USB8)

4 Chassis Fan Connector (CHA_FAN1)

5 Consumer Infrared Module Header (CIR1)

6 SATA2 Connector (SATA_0)

7 USB 2.0 Header (USB6_7)

8 Mini PCI Express Slot (MINI_PCIE1)

9 USB 3.0 Header (USB3_0_1)

10 SATA Power Connector (SATA_POW1)

11 Power LED Header (PLED1)

12 System Panel Header (PANEL1)

13 Backlight Power Jumper (BKT_PWR1)

14 Panel Power Jumper (PNL_PWR1)

15 LVDS Connector (LVDS1)

16 2 x 204-pin DDR3 SO-DIMM Slots (DDR3_A1, DDR3_B1)

17 Backlight & Amp Volume Control Header (BLT_VOL1)

18 COM Port Header (COM1)

19 1155-Pin CPU Socket

20 USB 2.0 Header (USB4_5)

21 SPI Flash Memory (32Mb)

22 CPU Fan Connector (CPU_FAN1)

23 PCI Express 3.0 x4 Slot (PCIE1)

24 Digital MIC Header (DMIC1)

25 HDMI_SPDIF Header (HDMI_SPDIF1)

26 Front Panel Audio Header (HD_AUDIO1)

27 Analog Surround Audio Header (HD_AUDIO2)

28 3W Audio AMP Output Wafer Header (SPEAKER1)

29 Home Theater PC Header (HTPC1)

30 LPC Debug Header (LPC1)

31 Clear CMOS Jumper (CLRCMOS1)

ASRock H61TM-ITX Motherboard

English

I/O Panel

** There are two LEDs on the LAN port. Please refer to the table below for the LAN

port LED indications.

ACT/LINK

LED

SPEED

LED

LAN Port

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Off 100Mbps connection

On 100Mbps connection Yellow 1Gbps connection

1* DC Jack

2 USB 3.0 Ports (USB01)

3 DVI-I (DVI1)

4 eSATA Connector (eSATA1)

5** LAN RJ-45 Port

6 USB 2.0 Ports (USB23)

7 Front Speaker (Lime)

8 Microphone (Pink)

9 HDMI Port (HDMI1)

* Please use a 19V power adaptor for the DC jack. This jack accepts dual barrel

plugs with an inner diameter of 2.5 mm and an outer diameter of 5.5 mm, where

the inner contact is +8 (±10%) through +19 (±10%) VDC and the shell is GND. The

maximum current rating depends on the power adaptor. The following are examples

of power adaptors that may be used:

DELTA DELTA-ADP-150TB-150W/19V

HP HP-TBC-BA52-150W/19V

FSP FSP-FSP150-ABAN1-150W/19V

<20mm

ASRock H61TM-ITX Motherboard

English

1. Introduction

Thank you for purchasing ASRock H61TM-ITX motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality con-

trol. It delivers excellent performance with robust design conforming to AS-

Rock’s commitment to quality and endurance.

This Quick Installation Guide contains introduction of the motherboard.

More detailed information of the motherboard can be found in the user

manual presented in the Support CD.

Because the motherboard specications and the BIOS software

might be updated, the content of this manual will be subject to

change without notice. In case any modications of this manual

occur, the updated version will be available on ASRock’s web-

site. You may nd the latest VGA cards and CPU support list on

ASRock’s website as well. http://www.asrock.com

If you require technical support related to this motherboard,

please visit our website for specic information about the model

you are using. www.asrock.com/support/index.asp

1.1 Package Contents

ASRock H61TM-ITX Motherboard

(Thin Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0 cm)

ASRock H61TM-ITX Quick Installation Guide

ASRock H61TM-ITX Support CD

2 x SATA Data Cables (Optional)

1 x SATA 1 to 1 Power Cable (Optional)

2 x I/O Panel Shields (Optional)

ASRock H61TM-ITX Motherboard

English

1.2 Specications

Platform

Thin Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0

cm (Compatible with Mini-ITX)

Solid Capacitors for CPU power

CPU

Supports 3rd and 2nd Generation Intel

Core

i7 / i5 / i3 /

Xeon

/ Pentium

/ Celeron

processors with up to 65W TDP

in an LGA1155 Package

Supports Intel

Turbo Boost 2.0 Technology

Supports Intel

K-Series unlocked CPU

Supports Hyper-Threading Technology

Chipset

Intel

H61

Supports Intel

Rapid Start Technology and Smart Connect

Technology

Memory

Dual Channel DDR3 Memory Technology

2 x DDR3 SO-DIMM slots

Supports DDR3 1600/1333/1066 non-ECC, un-buffered

memory

Max. capacity of system memory: 16GB (see CAUTION 1)

Expansion

Slots

1 x PCI Express 3.0 x4 slot (PCIE1: x4 mode) (see CAU-

TION 2)

1 x mini-PCI Express slot

Graphics

Supports Intel

HD Graphics Built-in Visuals (see CAUTION

Pixel Shader 5.0, DirectX 11 with Intel

Ivy Bridge CPU.

Pixel Shader 4.1, DirectX 10.1 with Intel

Sandy Bridge CPU

Max. shared memory 1760MB with Intel

Ivy Bridge CPU.

Max. shared memory 1759MB with Intel

Sandy Bridge CPU

Three VGA Output options: HDMI, DVI-I and LVDS

Supports HDMI 1.4a Technology with max. resolution up to

1920x1200 @ 60Hz

Supports DVI-I with max. resolution up to 1920x1200 @

75Hz

Supports LVDS with max. resolution up to 1920x1200 @

60Hz

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI

Supports HDCP with HDMI

Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback

with HDMI

ASRock H61TM-ITX Motherboard

English

Audio

7.1 CH HD Audio with Content Protection (Realtek ALC892

Audio Codec)

Premium Blu-ray audio support

LAN

PCIE x1 Gigabit LAN 10/100/1000 Mb/s

RTL8111E-VL

Supports Wake On LAN

Supports LAN Cable Detection

Supports Energy Efcient Ethernet 802.3az

Supports PXE

Rear Panel

I/O

1 x DC Jack

1 x DVI-I Port

1 x HDMI Port

1 x eSATA Connector

2 x USB 3.0 Ports by Etron EJ188

2 x USB 2.0 Ports

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

HD Audio Jacks: Front Speaker / Microphone

Connectors

2 x SATA2 3.0 Gb/s connectors, support NCQ, AHCI and

Hot Plug

1 x CIR header

1 x COM port header

1 x HDMI_SPDIF header

1 x LVDS connector

1 x LPC Debug header

1 x Home Theater PC header

1 x CPU Fan connector (4-pin)

1 x Chassis Fan connector (4-pin)

1 x Front Panel Audio connector

1 x Analog Surround Audio header

1 x Digital MIC header

1 x 3W Audio AMP Output Wafer header

1 x SATA Power connector

3 x USB 2.0 headers (support 5 USB 2.0 ports)

1 x USB 3.0 header by Etron EJ188 (supports 2 USB 3.0

ports)

BIOS

32Mb AMI UEFI Legal BIOS with GUI support

Supports “Plug and Play”

ACPI 1.1 Compliance Wake Up Events

Supports jumperfree

SMBIOS 2.3.1 Support

ASRock H61TM-ITX Motherboard

English

CAUTION!

1. Due to limitation, the actual memory size may be less than 4GB

for the reservation for system usage under Windows

32-bit

operating systems. Windows

64-bit operating systems do not

have such limitations. You can use ASRock XFast RAM to uti-

lize the memory that Windows

cannot use.

2. PCIE 3.0 is only supported with Intel

Ivy Bridge CPU. With In-

tel

Sandy Bridge CPU, it only supports PCIE 2.0.

3. Intel

HD Graphics Built-in Visuals and the VGA outputs can be

supported only with processors which are GPU integrated. Intel

Quick Sync Video 2.0, Intel

InTru

3D, Intel

Clear Video HD

Technology, Intel

Insider

, Intel

HD Graphics 2500/4000 are

supported by Intel

Ivy Bridge CPU. Intel

Quick Sync Video,

Intel

InTru

3D, Intel

Clear Video HD Technology, Intel

Graphics 2000/3000, Intel

Advanced Vector Extensions (AVX)

are supported by Intel

Sandy Bridge CPU.

* For detailed product information, please visit our website:

http://www.asrock.com

CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA Voltage

Multi-adjustment

Support CD

Drivers, Utilities, AntiVirus Software (Trial Version), Cyber-

Link MediaEspresso 6.5 Trial, Google Chrome Browser and

Toolbar

Hardware

Monitor

CPU/Chassis Temperature Sensing

CPU/Chassis Fan Tachometer

CPU/Chassis Quiet Fan

CPU/Chassis Fan Multi-Speed Control

Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

Microsoft

Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista

Vista

64-bit / XP / XP 64-bit compliant

Certications

FCC, CE, WHQL

ErP/EuP Ready (ErP/EuP ready power supply is required)

ASRock H61TM-ITX Motherboard

English

WARNING

Please realize that there is a certain risk involved with over-

clocking, including adjusting the setting in the BIOS, applying

Untied Overclocking Technology, or using third-party overclock-

ing tools. Overclocking may affect your system’s stability, or

even cause damage to the components and devices of your

system. It should be done at your own risk and expense. We are

not responsible for possible damage caused by overclocking.

ASRock H61TM-ITX Motherboard

English

1.3 Pin Header Easy Installation Guide

ASRock motherboards are equipped with pin headers with obvious colors

that assist you to recognize the crucial headers. Please refer to the illustra-

tion of the onboard headers’ pin dention below. If you need more informa-

tion about the usage of these headers, please refer to “Onboard Headers

and Connectors” and “Jumper Setup” for details.

Front Panel

Audio Header

HDMI_SPDIF

Header

System Panel Header

USB 2.0 Header

Power LED Header

USB 3.0 Header

ASRock H61TM-ITX Motherboard

English

1.4 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT

place jumper caps over these headers and connectors. Plac-

ing jumper caps over the headers and connectors will cause

permanent damage to the motherboard!

Serial ATA2 Connectors

(SATA_0:

see p.2, No. 6)

(SATA_1:

see p.2, No. 2)

SATA_1 SATA_0

These two Serial ATA2

(SATA2) connectors sup-

port SATA data cables for

internal storage devices.

The current SATA2 interface

allows up to 3.0 Gb/s data

transfer rate.

USB 2.0 Headers

(9-pin USB4_5)

(see p.2, No. 20)

(9-pin USB6_7)

(see p.2, No. 7)

(4-pin USB8)

(see p.2, No. 3)

Besides two default USB 2.0

ports on the I/O panel, there

are three USB 2.0 headers

and one USB port on this

motherboard. Each USB

2.0 header can support two

USB 2.0 ports.

USB 3.0 Header

(19-pin USB3_0_1)

(see p.2, No. 9)

Besides two default USB 3.0

ports on the I/O panel, there

is one USB 3.0 header on

this motherboard. The USB

3.0 header can support two

USB 2.0 ports.

ASRock H61TM-ITX Motherboard

English

Consumer Infrared

Module Header

(7-pin CIR1)

(see p.2, No. 5)

This header can be used

to connect the remote

controller receiver.

GND

Learn-in

IRTX

+5VA

LED

+5VA

CIR input

Front Panel Audio Header

(9-pin HD_AUDIO1)

(see p.2, No. 26)

This is an interface for the

front panel audio cable that

allows convenient connec-

tion and control of audio

devices.

1. High Denition Audio supports Jack Sensing, but the panel wire on

the chassis must support HDA to function correctly. Please follow

the instructions in our manual and chassis manual to install your

system.

2. If you use an AC’97 audio panel, please install it to the front panel

audio header by the steps below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to

OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. To activate the front mic.

For Windows

XP / XP 64-bit OS:

Select “Mixer”. Select “Recorder”. Then click “FrontMic”.

For Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista

/ Vista

64-bit OS:

Go to the “FrontMic” Tab in the Realtek Control panel. Adjust

“Recording Volume”.

ASRock H61TM-ITX Motherboard

English

System Panel Header

(9-pin PANEL1)

(see p.2, No. 12)

Analog Surround

Audio Header

(17-pin HD_AUDIO2)

(see p.2, No. 27)

Connect the power switch,

reset switch and system sta-

tus indicator on the chassis

to this header according to

the pin assignments below.

Note the positive and nega-

tive pins before connecting

the cables.

PIN Signal Name PIN Signal Name

18 SENSE 17 KEY

16 LFE 15 A_GND

14 A_GND 13 Center

12 Surr_Rear_R 11 A_GND

10 A_GND 9 Surr_Rear_L

8 Surr_Side_R 7 A_GND

6 A_GND 5 Surr_Side_L

4 Front_R 3 A_GND

2 A_GND 1 Front_L

Power LED Header

(3-pin PLED1)

(see p.2, No. 11)

3W Audio AMP Output

Wafer Header

(4-pin SPEAKER1)

(see p.2, No. 28)

Please connect the chassis

speaker to this header.

Please connect the chassis

power LED to this header

indicate system power

status. The LED is on when

the system is operating. The

LED keeps blinking in S1/S3

state. The LED is off in S4

state or S5 state (power off).

Front_L+

Front_R-

Front_R+

Front_L-

PLED+

PLED-

ASRock H61TM-ITX Motherboard

English

Chassis Fan Connector

(4-pin CHA_FAN1)

(see p.2, No. 4)

Please connect a fan cable

to the fan connector and

match the black wire to the

ground pin.

CPU Fan Connectors

(4-pin CPU_FAN1)

(see p.2, No. 22)

Though this motherboard

provides a 4-Pin CPU fan

(Quiet Fan) connector, 3-Pin

CPU fans can still work even

without fan speed control. If

you plan to connect a 3-Pin

CPU fan, please connect it

to Pin 1-3.

SATA Power Connector

(SATA_POW1)

(see p.2, No. 10)

Please connect a SATA

power cable.

Serial Port Header

(10-pin COM1)

(see p.2, No. 18)

This COM1 header supports

a serial port module.

HDMI_SPDIF Header

(2-pin HDMI_SPDIF1)

(see p.2, No. 25)

This header provides SPDIF

audio output to HDMI VGA

cards, allowing the system

to connect HDMI Digital

TV/projector/LCD devices.

Please connect the HDMI_

SPDIF connector of a HDMI

VGA card to this header.

RTS CTS

GND

TXD

DCD

DSR

DTR

RXD

ASRock H61TM-ITX Motherboard

English

Backlight & Amp

Volume Control

Header

(8-pin BLT_VOL1)

(see p.2, No. 17)

Digital MIC Header

(5-pin DMIC1)

(see p.2, No. 24)

Home Theater PC

Header

(7-pin HTPC1)

(see p.2, No. 29)

1: BKLT_EN

2: BKLT_PWM

3: BKLT_PWR

4: BKLT_PWR

5: GND

6: GND

7: Brightness_Up

8: Brightness_Down

1: +5V

2: No pin

2: SPDIF_OUT/DMIC_CLK

3: GND

4: DMIC_DATA

5: +3.3V

PIN Signal Name PIN Signal Name

8 HDMI CEC 7 #Power_Button

6 SMB_DATA 5 3.3V Standby

4 SMB_CLK 3 No pin

2 GND 1 Recording LED

LPC Debug Header

(13-pin LPC1)

(see p.2, No. 30)

PIN Signal Name PIN Signal Name

14 +3V 13 No pin

12 +3V 11 +3V

10 GND 9 GND

8 LAD3 7 LAD2

6 LAD1 5 LAD0

4 LFRAME# 3 RESET#

2 GND 1 CLK

ASRock H61TM-ITX Motherboard

English

LVDS Panel Connector

(40-pin LVDS1)

(see p.2, No. 15)

PIN Signal Name PIN Signal Name

1 ODD_Lane3_P 21 NC

2 ODD_Lane3_N 22 EDID_3.3V

3 ODD_Lane2_P 23 LCD_GND

4 ODD_Lane2_N 24 LCD_GND

5 ODD_Lane1_P 25 LCD_GND

6 ODD_Lane1_N 26 ODD_CLK_P

7 ODD_Lane0_P 27 ODD_CLK_N

8 ODD_Lane0_N 28 BKLT_GND

9 EVEN_Lane3_P 29 BKLT_GND

10 EVEN_Lane3_N 30 BKLT_GND

11 EVEN_Lane2_P 31 EDID_CLK

12 EVEN_Lane2_N 32 BKLT_ENABLE

13 EVEN_Lane1_P 33 BKLT_PWM_DIM

14 EVEN_Lane1_N 34 EVEN_CLK_P

15 EVEN_Lane0_P 35 EVEN_CLK_N

16 EVEN_Lane0_N 36

BKLT_PWR (12V/19V)

17 EDID_GND 37

BKLT_PWR (12V/19V)

LCD_VCC (3.3V/5V/12V)

BKLT_PWR (12V/19V)

LCD_VCC (3.3V/5V/12V)

39 NC

LCD_VCC (3.3V/5V/12V)

40 EDID_DATA

ASRock H61TM-ITX Motherboard

English

Clear CMOS Jumper

(CLRCMOS1)

(see p.2, No. 31)

Clear CMOSDefault

CLRCMOS1 allows you to clear the data in CMOS. To clear and reset

the system parameters to default setup, please turn off the computer and

unplug the power cord from the power supply. After waiting for 15 seconds,

use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds.

However, please do not clear the CMOS right after you update the BIOS.

If you need to clear the CMOS when you just nish updating the BIOS,

you must boot up the system rst, and then shut it down before you do the

clear-CMOS action. Please be noted that the password, date, time, user

default prole, 1394 GUID and MAC address will be cleared only if the

CMOS battery is removed.

1.5 Jumper Setup

When the jumper cap is placed on the

pins, the jumper is “Short”. If no jumper

cap is placed on the pins, the jumper is

“Open”. The illustration shows a 3-pin

jumper whose pin1 and pin2 are “Short”

when a jumper cap is placed on these

2 pins.

Backlight Power Jumper

(3-pin BKT_PWR1)

(see p.2, No. 13)

1-2 : +

19V

2-3 : +12V

Panel Power Jumper

(3-pin PNL_PWR1)

(see p.2, No. 14)

1-2 : +3V

2-3 : +5V

ASRock H61TM-ITX Motherboard

English

2. BIOS Information

The Flash Memory on the motherboard stores the BIOS Setup Utility.

When you start up the computer, please press <F2> or <Del> during the

Power-On-Self-Test (POST) to enter the BIOS Setup utility; otherwise,

POST continues with its test routines. If you wish to enter BIOS Setup after

POST, please restart the system by pressing <Ctl> + <Alt> + <Delete>, or

pressing the reset button on the system chassis. The BIOS Setup program

is designed to be user-friendly. It is a menu-driven program, which allows

you to scroll through its various sub-menus and to select among the prede-

termined choices. For detailed information about BIOS Setup, please refer

to the User Manual (PDF le) contained in the Support CD.

3. Software Support CD information

This motherboard supports various Microsoft

Windows

operating sys-

tems: 8 / 8 64-bit / 7 / 7 64-bit / Vista

/ Vista

64-bit / XP / XP 64-bit. The

Support CD that came with the motherboard contains necessary drivers

and useful utilities that will enhance motherboard features. To begin using

the Support CD, insert the CD into your CD-ROM drive. It will display the

Main Menu automatically if “AUTORUN” is enabled in your computer. If the

Main Menu does not appear automatically, locate and double-click the le

“ASRSETUP.EXE” in the Support CD to display the menu.

ASRock H61TM-ITX Motherboard

Français

Deutsch

Spezikationen

Plattform

Thin Mini-ITX Formfaktor: 17.0 cm x 17.0 cm; 6.7 Zoll x 6.7

Zoll (Kompatibel mit Mini-ITX)

Festkondensator für CPU-Leistung

CPU

Unterstützt Intel

Core

i7 / i5 / i3 / Xeon

/ Pentium

/ Cel-

eron

Prozessoren der zweiten und dritten Generation mit

bis zu 65W TDP für Sockel LGA1155

Unterstützt Intel

Turbo Boost 2.0-Technologie

Unterstützt freigegebene CPU der K-Serie

Unterstützt Hyper-Threading-Technologie

Chipsatz

Intel

H61

Unterstützt Intel

Rapid Start Technology und Smart Con-

nect Technology

Speicher

Dual-Kanal DDR3 Speichertechnologie

2 x DDR3 SO-DIMM-Steckplätze

Unterstützt DDR3 1600/1333/1066 non-ECC, ungepufferter

Speicher

Max. Kapazität des Systemspeichers: 16GB

Erweiterungs

steckplätze

1 x PCI Express 3.0 x4-Steckplatz (PCIE1: x4-Modus)

1 x mini-PCI-Express-Steckplatz

Onboard-

VGA

Unterstützt Intel

HD Graphics Built-in Visuals

Pixel Shader 5.0, DirectX 11 mit Intel

Ivy Bridge-Prozessor.

Pixel Shader 4.1, DirectX 10.1 mit Intel

Sandy Bridge-

Prozessor

Maximal gemeinsam genutzter Speicher 1760MB mit In-

tel

Ivy Bridge-Prozessor. Maximal gemeinsam genutzter

Speicher 1759MB mit Intel

Sandy Bridge-Prozessor

Drei VGA-Ausgangsoptionen: HDMI, DVI-I sowie LVDS

Unterstützt HDMI 1.4a mit einer maximalen Auösung von

1920 x 1200 bei 60 Hz

Unterstützt DVI-I mit einer maximalen Auösung von 1920 x

1200 bei 75 Hz

Unterstützt LVDS mit einer maximalen Auösung von 1920 x

1200 bei 60 Hz

Unterstützt Auto Lip Sync, Deep Color (12bpc), xvYCC und

HBR (High Bit Rate-Audio) mit HDMI

Unterstützt HDCP mit HDMI

Unterstutzt 1080p Blu-ray (BD) / HD-DVD-Wiedergabe mit

HDMI

ASRock H61TM-ITX Motherboard

Deutsch

Audio

7.1

CH HD Audio mit dem Inhalt Schutz (Realtek ALC892

Audio Codec)

Premium Blu-ray-Audio-Unterstützung

LAN

PCIE x1 Gigabit LAN 10/100/1000 Mb/s

RTL8111E-VL

Unterstützt Wake-On-LAN

Unterstützt LAN-Kabelerkennung

Unterstützt energieefzientes Ethernet 802.3az

Unterstützt PXE

E/A- An-

schlüsse an

der Rück-

seite

1 x Netzanschluss

1 x DVI-I Anschluss

1 x HDMI Anschluss

1 x eSATA-Anschluss

2 x USB 3.0-Anschlüsse durch Etron EJ188

2 x USB 2.0-Anschlüsse

1 x RJ-45 LAN Anschluss mit LED (ACT/LINK LED und

SPEED LED)

HD Audiobuchse: Lautsprecher vorne / Mikrofon

Anschlüsse

2 x SATA2 3,0 GB/s-Anschlüsse, unterstützen NCQ-, AHCI-

und Hot Plug

1 x Consumer Infrared-Modul-Header

1 x COM-Anschluss-Header

1 x HDMI_SPDIF-Anschluss

1 x LVDS-Anschluss

1 x LPC-Debugging-Stiftleiste

1 x Heimkino-PC-Stiftleiste

1 x CPUlüfter-Anschluss (4-pin)

1 x Gehäuselüfter-Anschluss (4-pin)

1 x Anschluss für Audio auf der Gehäusevorderseite

1 x Analoger Raumklang-Stiftleiste

1 x Digitale MIC-Stiftleiste

1 x 3-W-Audio-AMP-Ausgangs-Wafer-Stiftleiste

1 x SATA-Netz-Header

3 x USB 2.0-Anschlüsse (Unterstützung 5 zusätzlicher USB

2.0-Anschlüsse)

1 x USB 3.0-Anschluss durch Etron EJ188 (Unterstützung 2

zusätzlicher USB 3.0-Anschlüsse)

BIOS

32Mb AMIs Legal BIOS UEFI mit GUI-Unterstützung

Unterstützung für “Plug and Play”

ACPI 1.1-Weckfunktionen

JumperFree-Modus

La pagina sta caricando ...

ASROCK H61TM-ITX Guida Rapida

Marca: ASROCK

Modello: H61TM-ITX

Categoria: Schede madri

Tipo: Guida Rapida

Scarica il pdf

rapporto

ASROCK H61TM-ITX Guida Rapida

ASROCK H61TM-ITX Guida Rapida

Documenti correlati

Altri documenti