Hitachi DZ-MV550E Manuale utente

English

DZ-MV580E

DZ-MV550E

Instruction manual

To obtain the best performance and ensure years of

trouble-free use, please read this instruction

manual completely.

DZ-MV550E DZ-MV580E

DVDCAM PC Software Support Center

URL http://dvdcam-pc.support.hitachi.ca/

English

2

Important Information

For Your Safety

The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the

camera/recorder is to be left unattended for a long period of time, turn it off .

The DVD video camera/recorder and AC adapter/

charger have the following caution marks.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT OPEN.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Precautions

WARNING: Many television programs and films

are copyrighted. In certain circumstances, copy-

right law may apply to private in-home

videotaping of copyrighted materials.

Identifications of caution marks

This symbol warns the user that

uninsulated voltage within the unit

may have sufficient magnitude to

cause electric shock. Therefore, it is

dangerous to make any kind of contact

with any inside part of this unit.

This symbol alerts the user that

important literature concerning the

operation and maintenance of this unit

has been included. Therefore, it should

be read carefully to avoid any

problems.

WARNING: To prevent risk of injury or damage to

your DVD video camera/recorder and the AC

adapter/charger, use only the DZ-BP14S/DZ-

BP14SW battery and DZ-ACS1 AC adapter/

charger.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE

RECOMMENDED ACCESSORIES ONLY.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The liquid crystal display (LCD) panel is made

by highly precise technology. More than 99.99%

of its picture elements (pixels) are effective, but

some (less than 0.01%) may appear as colored

bright dots. This does not indicate a fault as the

LCD panel stretches the limits of current

technology.

CLASS 1

LASER PRODUCT

CAUTION

This product contains a laser diode of higher

class than 1. To ensure continued safety, do not

remove any covers or attempt to gain access to

the inside of the product. Refer all servicing to

qualified personnel.

English

3

ИНФОРМАЦИЯ

О СЕРТИФИКАЦИИ ПРОДУКЦИИ

УСТРОЙСТВО ЗАРЯДНОЕ (Блок питания) МОДЕЛЬ DZ-ACS1

сертифицированы органом по сертификации электрооборудования <<MEHTECT>>

Менделеевского ЦСМС

(Регистрационный номер в Госреестре – POCC RU.0001.11ME28)

INFORMATION ON PRODUCT CERTIFICATION

AC ADAPTER / BATTERY CHARGER MODEL DZ-ACS1

certified by “MENTEST” of Mendeleevsky CSMS

(Registration number in State Register - POCC RU.0001.11ME28)

ИНФОРМАЦИЯ

О СЕРТИФИКАЦИИ ПРОДУКЦИИ

УСТРОЙСТВО ЗАРЯДНОЕ (Блок питания) МОДЕЛЬ DZ-ACS1

сертифицированы органом по сертификации электрооборудования

<<КОРПОРАЦИЯ СТАНДАРТ>>

(Регистрационный номер в Госреестре – РОСС RU.0001.11АЕ68)

INFORMATION ON PRODUCT CERTIFICATION

AC ADAPTER / BATTERY CHARGER MODEL DZ-ACS1

certified by “CORPORATION STANDARD”

(Registration number in State Register – POCC RU.0001.11AE68)

Сертификат соответствия №: POCC JP.ME28.B00613

Сертификат соответствия выдан: 16-ro января 2003 года

Сертификат соответствия действителен до: 16-ro января 2005 года

Модель DZ-ACS1 соответствует требованиям

нормативных документов:

ГОСТ P МЭК 60065-2002,

ГОСТ Р 51318.14.1-99

Срок службы 7 (семь) лет

Certificate of conformity No.: POCC JP.ME28.B00613

Certificate of conformity issued: The 16

th

of January 2003

Certificate of conformity valid till: The 16

th

of January 2005

Model DZ-ACS1 complies with requirements of

normative documents:

GOST R IEC 60065-2002,

GOST R 51318.14.1-99

Life cycle 7 (seven) years

Сертификат соответствия №: POCC JP.АE68.B10147

Сертификат соответствия выдан: 19-го января 2004 года

Сертификат соответствия действителен до: 18-го января 2006 года

Модель DZ-ACS1 соответствует требованиям

нормативных документов:

ГОСТ Р МЭК 60065-2002,

ГОСТ Р 51318.14.1-99.

Cрок службы 7 (семь) лет

Certificate of conformity No.: POCC JP.AE68.B10147

Certificate of conformity issued: The 19

th

of January 2004

Certificate of conformity valid till: The 18

th

of January 2006

Model DZ-ACS1 complies with requirements of

normative documents:

GOST R IEC 60065-2002,

GOST R 51318.14.1-99.

Life cycle 7 (seven) years

ME28

A

E68

English

4

IMPORTANT SAFEGUARDS

In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major

factor in the design of every instrument. But, safety is your responsibility too.

This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/

recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy

place for future reference.

INSTALLATION

1 Read and Follow Instructions — All the safety and

operating instructions should be read before the

video product is operated. Follow all operating and

use instructions.

2 Retain Instructions — The safety and operating

instructions should be retained for future reference.

3 Heed Warnings — Comply with all warnings on the

video product and in the operating instructions.

4 Power Sources — This video product should be

operated only from the type of power source indicated

on the marking label. If you are not sure of the type

of power supply to your home, consult your video

dealer or local power company. For video products

intended to operate from battery power, or other

sources, refer to the operating instructions.

5 Overloading — Do not overload wall outlets and

extension cords as this can result in a risk of fire or

electric shock. Overloaded AC outlets and extension

cords are dangerous, and so are frayed power cables,

damaged or cracked wire insulation and broken

plugs. They may result in a shock or fire hazard.

Periodically examine the cord and have it replaced by

your service technician if appearance indicates

damage or deteriorated insulation.

6 Power-Cord Protection — Power-supply cords

should be routed so that they are not likely to be

walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they

exit from the appliance.

7 Ventilation — Slots and openings in the cabinet are

provided for ventilation to ensure reliable operation of

the video product and to protect it from overheating.

These openings must not be blocked or covered. The

openings should never be blocked by placing the

video product on a bed, sofa, rug, or other similar

surface. This video product should never be placed

near or over a radiator or heat register. This video

product should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation

is provided or the video product manufacturer’s

instructions have been followed.

8 Attachments — Do not use attachments unless

recommended by the video product manufacturer as

they may cause hazards.

Caution: Maintain electrical safety. Powerline operated

equipment or accessories connected to this unit should

bear the UL listing mark or CSA certification mark on the

accessory itself and should not have been modified so as

to defeat the safety features. This will help avoid any

potential hazard from electric shock or fire. If in doubt,

contact qualified service personnel.

9 Water and Moisture — Do not use this video product

near water — for example, near a bath tub, wash

bowl, kitchen sink, or laundry tub, in a wet basement,

or near a swimming pool, and the like.

10 Accessories — Do not place this video product on an

unstable cart, stand, tripod, bracket, or table. The

video product may fall, causing serious injury to a

child or adult, and serious damage to the appliance.

Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the

video product. Any mounting of the product should

follow the manufacturer’s instructions, and should

use a mounting accessory recommended by the

manufacturer.

11 An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

English

5

12 Power Lines — An outside antenna system should

not be located in the vicinity of overhead power lines

or other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing

an outside antenna system, extreme care should be

taken to keep from touching or approaching such

power lines or circuits as contact with them might be

fatal. Installing an outdoor antenna can be hazardous

and should be left to a professional antenna installer.

USE

13 Cleaning — Unplug this video product from the wall

outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

14 Object and Liquid Entry — Never push objects of

any kind into this video product through openings as

they may touch dangerous voltage points or short-out

parts that could result in a fire or electric shock. Never

spill liquid of any kind on the video product.

15 Lightning — For added protection for this video

product during a lightning storm, or when it is left

unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the

antenna or cable-system. This will prevent damage

to the video product due to lightning and power-line

surges.

SERVICE

16 Servicing — Do not attempt to service this video

product yourself as opening or removing covers may

expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

17 Conditions Requiring Service — Unplug this video

product from the wall outlet and refer servicing to

qualified service personnel under the following

conditions.

a. When the power-supply cord or plug is

damaged.

b. If liquid has been spilled, or objects have fallen

into the video product.

c. If the video product has been exposed to rain or

water.

d. If the video product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions. Improper adjustment of other

controls may result in damage and will often

require extensive work by a qualified technician

to restore the video product to its normal

operation.

e. If the video product has been dropped or the

cabinet has been damaged.

f. When the video product exhibits a distinct

change in performance — this indicates a need

for service.

18 Replacement Parts — When replacement parts are

required, have the service technician verify that the

replacements he uses have the same safety

characteristics as the original parts. Use of

replacements specified by the video product

manufacturer can prevent fire, electric shock or other

hazards.

19 Safety Check — Upon completion of any service or

repairs to this video product, ask the service

technician to perform safety checks recommended

by the manufacturer to determine that the video

product is in safe operating condition.

20 Heat — The product should be situated away from

heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers) that

produce heat.

English

6

Cautions When Using

Handle the liquid crystal display (LCD) with care:

• The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with a

sharp object.

• If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear soon,

turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again.

• Do not place the DVD video camera/recorder with the open LCD screen down.

• Close the LCD monitor when not using the DVD video camera/recorder.

Liquid crystal display (LCD) and viewfinder:

• The LCD screen and viewfinder are the products of highly precise technology. Among the total number

of pixels (approx. 120,000 pixels for LCD monitor and approx. 110,000 pixels for viewfinder), 0.01% or

less pixels may be missing (black dots) or may remain lit as colored dots (red, blue, green). This shows

the limitations of the current technology, and does not indicate a fault that will interfere with recording.

• The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video camera/

recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal

brightness will be restored when the temperature inside the DVD video camera/recorder rises.

Hold the DVD video camera/recorder correctly:

• Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The

viewfinder or LCD monitor could detach and the DVD video camera/recorder may fall.

Do not subject the DVD video camera/recorder to impact:

• This DVD video camera/recorder is a precision machine. Take great care that you do not strike it

against a hard object or let it fall.

• Do not use the DVD video camera/recorder on a tripod in a place where it is subject to severe vibrations

or impact.

No sand or dust!

• Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause

malfunctions or defects.

No water or oil!

• Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric

shock, malfunctions or defects.

English

7

Heat on surface of product:

• The surface of the DVD video camera/recorder will be slightly warm, but this does not indicate a fault.

Screen on connected TV:

• Never leave the disc navigation screen, still image or camera image displayed on your TV to which the

DVD video camera/recorder is connected: Doing so could result in displayed image retention or

phosphor degradation of TV screen.

Be careful of ambient temperature:

• Using the DVD video camera/recorder in a place where the temperature is over 40°C or under 0°C will

result in abnormal recording/playback.

• Take care that the temperature of this DVD video camera/recorder, when connected to PC does not

rise excessively (reference for usage: approx. 30 minutes at about 30ºC).

• Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle where the

temperature is very high for a long time: This could cause malfunctions.

Do not point directly at the sun:

• If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction or

a fire could occur.

• Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This

could cause malfunctions.

Do not use the DVD video camera/recorder near TV or radio:

• This could cause noise to appear on the TV screen or in radio broadcasts.

Do not use the DVD video camera/recorder near strong radio waves or magnetism:

• If the DVD video camera/recorder is used near strong radio waves or magnetism, such as near a radio

wave tower or electric appliances, noise could enter video and audio that are being recorded. During

playback of normally recorded video and audio, noise may also be present in picture and sound.

At worst the DVD video camera/recorder could malfunction.

Do not expose the DVD video camera/recorder to soot or steam:

• Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.

Do not use the DVD video camera/recorder near corrosive gas:

• If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated by

gasoline or diesel engines, or corrosive gas such as hydrogen sulfide, the external or internal terminals

could corrode, disabling normal operation, or the battery connecting terminals could corrode, so that

power will not turn on.

Do not use the DVD video camera/recorder near ultrasonic humidifier:

• With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the air,

and white particles could adhere to the optical head of the DVD video camera/recorder, which could

cause it to operate abnormally.

Do not expose the DVD video camera/recorder to insecticide:

• Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block, and

in such a case the DVD video camera/recorder might not operate normally. Turn the DVD video

camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.

Do not use a generally available 8 cm CD lens cleaner:

• Cleaning the lens is not necessary when using this DVD video camera/recorder in the usual way.

• Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.

English

8

Be careful of moisture condensation:

• When you move the DVD video camera/recorder between places where the difference in

temperatures is great - such as entering a lodge from a ski slope or going out of a cooled room or vehicle

- condensation (vapor in air warmed or cooled to water droplets) could occur on the lens and/or inside

the DVD video camera/recorder. If condensation occurs, do not open the cover of disc or card insertion

block if possible. If condensation occurs on the lens, wip e it o f f w i t h a so f t , d r y c l o th . E v e n i f t h e ex t e r n a l

surface of DVD video camera/recorder has dried, condensation may remain inside: Turn the DVD

video camera/recorder off and leave it in a dry place for at least 1-2 hours before using it again.

Do not use the DVD video camera/recorder for a long uninterrupted period of time:

• This DVD video camera/recorder cannot be used for a long time continuously as a surveillance

camera/monitor. If you use the DVD video camera/recorder for a long continuous period of time, the

temperature of DVD video camera/recorder could exceed a limit and the recording/playback

operation could be slowed down: In this case, turn it off and wait for a while before using it again.

Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or

CARD ACCESS indicator is lit or blinking:

• The ACCESS/PC or CARD ACCESS indicator is lit or

blinking to show that data is being written to disc or card, or

being read from it. At this time, do not do any of the

following, so as not to damage the data:

− Remove battery

− Disconnect AC adapter/charger

− Plug or unplug PC connection cable

− Remove disc or card

− Subject DVD video camera/recorder to severe vibrations

or impact.

− Violently open or close the LCD monitor

If you turn the DVD video camera/recorder off while the ACCESS/PC or CARD ACCESS indicator is

lit or blinking, turn it on again with the disc or card loaded in it: Repair of the disc or card will be executed

automatically (see page 163).

Do not wipe the DVD video camera/recorder case with benzene or thinner:

• The coating of case could peel off or the case surface could deteriorate.

• When using a chemical cleaning cloth, follow the instructions.

Also read the instructions attached with optional accessories:

• For optional accessories, observe the cautions and follow instruction manuals attached.

CARD

ACCESS

indicator

ACCESS/PC

indicator

English

9

Cautions When Storing

Do not leave the DVD video camera/recorder in a place where the temperature is very

high for a long period of time.

• The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave the

DVD video camera/recorder in such a place, it could malfunction or the case could be damaged. Also,

do not expose the DVD video camera/recorder to direct sunlight or place it near a heater.

Do not store the DVD video camera/recorder in a place where the humidity is high or

in a dusty place:

• Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high, the

lens could be moldy, and the DVD video camera/recorder could become inoperable. It is

recommended that you put the DVD video camera/recorder with desiccant in a box when storing it

in a closet, etc.

Do not store the DVD video camera/recorder in a place subject to strong magnetism

or intense vibrations:

• This could cause malfunctions.

Detach the battery from the DVD video camera/recorder and store it in a cool place:

• Leaving the battery attached or storing it at high temperature could shorten its life.

English

10

Suggestions and Restrictions

Make a trial recording:

• Always make a trial recording before doing actual recording to make sure that recording is normal. The

data that have not been stored normally because of a defect in the DVD video camera/recorder cannot

be restored.

It is recommended that you use DVD-RAM disc from which recorded contents can be deleted for trial

recording.

Do not use the DVD video camera/recorder for professional applications:

• This DVD video camera/recorder is designed and produced for home-use recording and playback.

The recorded contents cannot be compensated for:

• Hitachi cannot compensate for any damages caused when recording is not made normally or recorded

contents cannot be played back because of a defect in the DVD video camera/recorder, disc or card.

Also, Hitachi cannot be responsible for your recorded video and audio.

• If you or a third party make a mistake when handling this DVD video camera/recorder, disc, card, etc.,

the recorded contents may be lost. We cannot be responsible for compensation for damage due to loss

of recorded contents.

Copyright:

• Data recorded on the disc or card in this DVD video camera/recorder using other digital/analog

media or devices are protected by the copyright act and cannot be used without permission of the

owner of copyright, except for personal enjoyment. Be aware that recording is restricted for some

demonstrations, performances and exhibitions, even for personal enjoyment.

English

11

Read This First

To guide you, we’ve included following six chapters.

• The section on “Setups” explains how to set up

the DVD video camera/recorder, battery, and

set the date/time.

• The section on “Basic Techniques” explains the

basic operation of this DVD video camera/

recorder - recording of movies, still images and

playback of recorded images.

• The section on “Advanced Techniques” explains

settings on this DVD video camera/recorder for

more advanced usage.

• The section on “Disc Navigation” explains

editing with Disc Navigation: Refer to this

section when finalising DVD-R disc and

initialising DVD-RAM disc.

• The section on “Connecting to PC” explains the

contents of provided CD-ROM and how to

install the software included.

• “Subsidiary Information” includes an

introduction to products sold separately, proper

cleaning, and troubleshooting.

We want this manual to be as helpful as possible,

so it includes two easy ways to find the information

you need:

• A quick index for the information you use most

often (this page).

• A detailed table of contents directing you to

specific information quickly (see page 14-16).

Get to know your DVD video camera/recorder by

using this manual, and get to know Hitachi. We

appreciate your business.

Quick Index

Available Discs................................................ 27

Recording Movie ............................................. 52

Playing Back.................................................... 61

Connecting to a TV.......................................... 80

Functions Available with Disc Navigation...... 107

Connecting to PC.......................................... 138

Microsoft

®

, Windows

®

, Windows

®

98, Windows

®

98 Second Edition, Windows

®

Me, Windows

®

2000

Professional, and Windows

®

XP are registered trademarks of Microsoft Corporation.

Intel

®

, Pentium

®

Processor, and Celeron

®

Processor are registered trademarks of Intel Corporation.

IBM

®

and PC/AT

®

are registered trademarks of International Business Machines Corporation.

Manufactured under licence from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Other company names and product names listed are trademarks or brand names belonging to each

individual company.

SD logo is a trademark.

With this DVD video camera/recorder you can view the picture being recorded or the playback picture

whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor switches the picture

to appear on the LCD monitor or in the viewfinder. The following text describes the operation assuming that

the viewfinder is used as a major monitor device.

It is possible to switch the language in the on-screen display of this DVD video camera/recorder (see

page 101).

English

12

Introduction

●You can start recording immediately after stopping playback (P.52, 61)

Unlike tape devices, you do not need to search for the recording start position or locate the beginning

of blank portion.

You can stop playback and immediately start recording: New recording will not overwrite any

previously recorded data.

●You can immediately play back desired recorded scenes (P.105)

You do not need to rewind, unlike recorders using tape.

You can select any scene you want and immediately play it back (using Disc Navigation function).

●You can easily print without PC (P.118)

Use DPOF to set the photos to be printed and the print number among the photos recorded on SD

memory card or MultiMediaCard: This is useful when printing photos on a printer conforming to SD

memory card or when asking a photo lab to print them.

●Use Disc Navigation to create your original movie (P.124)

You can delete unnecessary scenes, move any scenes, etc., and create your original movie work (Play

List).

If you stop playback midway and start recording, overwrite will not occur.

Recorded scenes

Before editing

After editing

English

13

●You can easily edit scenes, which is

quite difficult with tape (P.86)

Using this DVD video camera/recorder, you can

collect scenes of your child, for example, on play

list of Disc Navigation function and create an

original movie: Then simply play back the play list

and dub it on VCR. It is also easy to make any

number of identical tapes.

●Create original DVDs on PC (P.150)

You can use a DVD-R disc to create an original

DVD, using the provided software CD-ROM.

The created DVD disc can be played back on DVD

player, DVD-ROM drive, etc.

Up to now, you had to

repeatedly press

buttons

With DVD, you can simply

play back this DVD video

camera/recorder, and

press the record button on

VCR.

Original DVD being

created

Playback of DVD

English

14

Table of Contents

Important Information ........................................2

For Your Safety .................................................2

Precautions .......................................................2

IMPORTANT SAFEGUARDS ...........................4

Cautions When Using........................................6

Cautions When Storing......................................9

Suggestions and Restrictions..........................10

Read This First ................................................11

Introduction......................................................12

Table of Contents ............................................14

Checking Provided Accessories ......................17

Names of Parts................................................18

About This Manual...........................................22

Try to Record and Play Back using Disc

(Video and Photo).........................................23

Try to Record and Play Back using Card

(Photo) ..........................................................25

Discs and Cards ..............................................27

AVAILABLE DISCS.............................................27

INFORMATION ON DVD-R DISC.......................28

EXAMPLES OF DISCS THAT CANNOT

BE USED ON THIS DVD VIDEO

CAMERA/RECORDER:....................................28

HANDLING DISCS..............................................29

AVAILABLE CARDS............................................30

Storage Capacity on Disc or Card...................31

RECORDABLE TIME OF MOVIE (VIDEO).........31

RECORDABLE STILLS (PHOTOS) ON DISC ....31

RECORDABLE STILLS (PHOTOS) ON CARD...32

SIZE AND QUALITY OF PHOTOS .....................32

Setups

Setting Up the DVD Video Camera/

Recorder .......................................................33

HOLDING DVD VIDEO CAMERA/

RECORDER.....................................................33

ATTACHING SHOULDER STRAP......................34

ATTACHING LENS CAP.....................................34

INSERTING BATTERY INTO REMOTE

CONTROL........................................................35

REMOVING BATTERY FROM REMOTE

CONTROL........................................................35

CHANGING LENS COVER FOR

REPLACEMENT...............................................36

VIEWING SUBJECT THROUGH

VIEWFINDER ...................................................38

VIEWING IMAGE ON LCD MONITOR

SCREEN...........................................................38

CLOSING LCD MONITOR ..................................39

SETTING DATE AND TIME ................................40

CHANGING DISPLAY FORMAT OF DATE

AND TIME.........................................................41

Setting Up the Battery......................................42

CHARGING BATTERY........................................42

ATTACHING BATTERY TO DVD VIDEO

CAMERA/RECORDER.....................................43

REMOVING BATTERY........................................43

BATTERY REMAINING LEVEL INDICATOR......45

EFFICIENT USE OF BATTERY..........................45

USING DVD VIDEO CAMERA/RECORDER

WITH AC ADAPTER/CHARGER......................46

Inserting and Removing Disc...........................47

INSERTING DISC................................................47

REMOVING DISC................................................49

Inserting and Removing Card..........................50

Basic Techniques

Basic Handling of DVD Video Camera/

Recorder........................................................51

TURNING DVD VIDEO CAMERA/

RECORDER ON AND OFF..............................51

Recording Movie..............................................52

Recording Stills................................................53

Compensating for Backlight.............................54

On-Screen Information ....................................55

INFORMATION DISPLAY DURING

RECORDING....................................................55

Zooming...........................................................59

MACRO RECORDING ........................................60

RECORDING SUBJECTS FOR STRONGER

WIDE-ANGLE OR TELEPHOTO EFFECT.......60

Playing Back....................................................61

PLAYING BACK ..................................................61

PLAYBACK FROM START OF DISC OR

CARD................................................................62

SEARCH PLAYBACK OF MOVIE.......................62

FRAME ADVANCE/FRAME BACK/SLOW

PLAYBACK OF MOVIE ....................................62

SKIP PLAYBACK OF MOVIE..............................63

PLAYING BACK STILLS .....................................63

JUMPING TO SPECIFIED POINT (GO TO)........64

On-Screen Information Display........................65

INFORMATION DISPLAY DURING

PLAYBACK.......................................................65

Checking Flow of Quick Mode.........................66

Camera Functions

FLOW OF QUICK MODE WHEN RECORDING

MOVIE: .............................................................67

FLOW OF QUICK MODE WHEN RECORDING

PHOTO (DISC):................................................68

FLOW OF QUICK MODE WHEN RECORDING

PHOTO (CARD): ..............................................69

English

15

Disc Navigation Functions

FLOW OF QUICK MODE

(WITH DVD-RAM DISC):..................................71

FLOW OF QUICK MODE

(WITH DVD-R DISC):.......................................72

FLOW OF QUICK MODE (WITH CARD): ...........73

Manually Focusing Subject..............................74

FOCUSING DURING RECORDING....................74

Adjusting Brightness of Image to be recorded

(Exposure).....................................................76

Using Full Auto Function..................................77

Setting Video Flash (for DZ-MV580E)...............78

USING EXTERNAL MICROPHONE....................79

Viewing on TV Screen......................................80

CONNECTING TO A TV......................................80

VIEWING ON TV SCREEN .................................81

Playback on DVD Video Recorder/Player........82

PLAYING BACK DVD-RAM DISC.......................82

PLAYING BACK DVD-R DISC ............................83

Removing and Replacing from/in Round DVD

Holder............................................................84

HOW TO REMOVE DISC....................................84

REPLACING DISC IN ROUND DVD HOLDER...85

WHEN THE HINGE OF ROUND DVD HOLDER

COMES OFF ....................................................85

DISC CLEANING.................................................85

Recording (Dubbing) Images ...........................86

RECORDING (DUBBING) IMAGES ON

OTHER VIDEO DEVICES ................................86

Advanced Techniques

Checking Flow of Normal Mode.......................87

Camera Functions

Setting Up Camera Functions..........................90

SELECTING SHOOTING MODE TO MATCH

THE SUBJECT

(SWITCHING PROGRAM AE MODE)..............90

ADJUSTING COLOR (WHITE BALANCE)..........91

USING THE ELECTRONIC IMAGE

STABILIZER (EIS)............................................93

REDUCING WIND NOISE DURING

RECORDING (MIC.FILTER) ............................93

SWITCHING TO 16:9 MODE ..............................94

Setting Up Record Functions ...........................95

SWITCHING MOVIE QUALITY

(VIDEO MODE) ................................................95

SWITCHING QUALITY OF STILL IMAGE

(QUALITY)........................................................96

SELF-TIMER .......................................................97

SETTING ON-SCREEN DISPLAY OUTPUT

ON OR OFF (OSD OUTPUT)...........................98

LCD Setup........................................................99

SETTING BRIGHTNESS OF LCD SCREEN

(BRIGHTNESS)................................................99

SETTING COLOR DENSITY OF LCD

SCREEN (COLOR LEVEL) ..............................99

Initial Settings.................................................100

SWITCHING OPERATING SOUND ON OR

OFF (BEEP)....................................................100

TURNING DVD VIDEO CAMERA/RECORDER

OFF AUTOMATICALLY (POWER SAVE)......100

TURNING RECORD LED ON OR OFF

(RECORD LED)..............................................101

CHANGING DISPLAY LANGUAGE

(LANGUAGE)..................................................101

RESETTING MENU SETTINGS TO

DEFAULTS (RESET)......................................102

Disc Navigation

Using Disc Navigation................................... 103

STARTING OR TERMINATING DISC

NAVIGATION..................................................103

PLAYING BACK FROM DISC NAVIGATION

SCREEN.........................................................105

SELECTING MULTIPLE SCENES....................106

SELECTING CONSECUTIVE SCENES

TOGETHER....................................................106

FUNCTIONS AVAILABLE WITH DISC

NAVIGATION..................................................107

UNDERSTANDING FLOW OF DISC

NAVIGATION MENU......................................108

Scene............................................................ 109

DELETING SCENES (DELETE)........................109

CHANGING IMAGES FOR THUMBNAILS

(EDIT - THUMBNAIL) .....................................111

PLAYING BACK BY SKIPPING SCENES

(EDIT - SKIP)..................................................112

ARRANGING ORDER OF SCENES

(EDIT - MOVE)................................................112

DIRECTING SCENES EFFECTIVELY

(EDIT - FADE).................................................113

COMBINING MULTIPLE SCENES

(EDIT - COMBINE) .........................................114

DIVIDING MOVIES (EDIT - DIVIDE).................115

COPYING STILLS ON DVD-RAM DISC TO

CARD (COPY) ................................................116

LOCKING SCENES ON CARD (LOCK)............117

DESIGNATING SCENES TO BE PRINTED

(DPOF)............................................................118

SELECTING SCENES USING MENU SCREEN

(SELECT)........................................................119

DISPLAYING INFORMATION USING MENU

SCREEN (DETAIL).........................................120

Program......................................................... 121

WHAT IS “PROGRAM”?....................................121

SWITCHING TO THUMBNAIL DISPLAY OF

SPECIFIC DATE (SWITCH)...........................121

PLAYING BACK PROGRAM (PLAY) ................122

CHANGING TITLE OF PROGRAM (TITLE)......122

Play List......................................................... 124

WHAT IS “PLAY LIST”?.....................................124

CREATING NEW PLAY LIST (CREATE)..........124

SWITCHING TO DISPLAY OF EACH PLAY

LIST (SWITCH)...............................................125

PLAYING BACK A PLAY LIST (PLAY)..............125

ADDING SCENES TO PLAY LIST

(EDITING PLAY LIST) ....................................126

English

16

DELETING SCENES FROM PLAY LIST

(EDITING PLAY LIST)....................................127

ADDING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) ....................127

DELETING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) ....................128

SELECTING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) ....................128

ARRANGING ORDER OF SCENES (MOVE)...129

CHANGING TITLE OF PLAY LIST (TITLE) ......130

DELETING PLAY LIST (DELETE) ....................130

Go To.............................................................131

TOP (END) ........................................................131

Disc or Card Management.............................132

VERIFYING REMAINING FREE SPACE ON

DISC OR CARD (CAPACITY)........................132

PROTECTING DISC FROM WRITING

(PROTECT DISC)...........................................132

INITIALIZING DVD-RAM DISC OR CARD

(FORMAT DISC. FORMAT CARD)................133

UPDATING CONTROL INFORMATION OF

DVD-RAM DISC

(UPDATE CONTROL INFO.)..........................134

FINALIZING DVD-R DISC (FINALIZE DISC)....135

Others............................................................136

DISPLAYING MOVIES OR STILLS

INDEPENDENTLY (CATEGORY)..................136

PLAYING BACK SCENES REPEATEDLY

(REPEAT PLAY).............................................136

SLIDE SHOW (CONTINUOUS PLAYBACK OF

STILLS)...........................................................137

Connecting to PC

THE FOLLOWING ARE AVAILABLE WHEN

CONNECTING TO PC....................................138

Contents on Provided CD-ROM ....................140

Installing Software .........................................142

DISPLAYING INSTALLER SCREEN ................142

INSTALLING USB DRIVER...............................143

INSTALLING UDF DRIVER

(DVD-RAM DRIVER)......................................144

INSTALLING DVD-MovieAlbumSE ...................146

INSTALLING MyDVD ........................................148

Creating DVD Video on PC from DVD-RAM

Disc Recorded on DVD Video Camera/

Recorder .....................................................150

Uninstalling Software.....................................152

UNINSTALLING USB DRIVER .........................152

DELETING OTHER APPLICATIONS................153

Cautions When Using DVD Video Camera/

Recorder by Connecting It to PC ................154

Subsidiary Information

Introduction to Optional Accessories.............155

CAMERA ACCESSORIES ................................155

POWER SUPPLY..............................................155

INFORMATION ON SQUARE ADAPTER.........155

Cleaning.........................................................156

Changing Setting of Demonstration...............157

Terminology...................................................158

No DVD Video Camera/Recorder Operation -

Check the Following:...................................161

Trouble Messages .........................................163

Troubleshooting.............................................170

System Reset ................................................178

Major Specifications.......................................179

Index..............................................................181

Be sure to read the following before opening

the package of CD-ROM.............................183

English

17

Checking Provided Accessories

Make sure that you have all the following accessories in package:

Battery (model DZ-BP14S):

Portable power supply for this DVD video

camera/recorder. Charge it before use.

AC adapter/charger (model DZ-ACS1):

Used to power the DVD video camera/

recorder from AC outlet, or charge battery.

DC power cord:

When powering the DVD video camera/

recorder from household AC outlet, use this

cord to connect the DVD video camera/

recorder and AC adapter/charger.

Power cable:

Connect between household AC outlet and

AC adapter/charger.

Infrared remote control

(model DZ-RM3W):

Use to control the DVD video camera/

recorder from a distance.

Lithium battery (model CR2025):

To power the remote control.

AV/S output cable:

Used when viewing the picture played back

on the DVD video camera/recorder on TV

screen, or output video to another video

device.

Shoulder strap:

Attach to the DVD video camera/recorder to

hang it from shoulder.

Lens cap and lens cap string:

Attach the lens cap when not recording, to

protect the lens.

Single-sided 8 cm DVD-RAM disc (in

Round DVD Holder):

To record videos (movies) and photos (stills)

on this DVD video camera/recorder.

Software CD-ROM:

Use this CD-ROM when connecting the DVD

video camera/recorder to PC.

PC connection cable:

Use this cable when connecting the DVD

video camera/recorder to PC.

2 lens covers for replacement

Use to replace the attached lens cover (see

P. 3 6)

Note:

The provided single-sided DVD-RAM disc is not generally available in shops:

When purchasing a disc, order a 60-minute double-sided disc (2.8GB, in

Round DVD Holder).

ex. Maxell DRMH60

WARNING: Keep

this battery away

from children. If

swallowed, consult

a physician

immediately for

emergency

treatment.

English

18

Names of Parts

1 Infrared receiver (P. 36)

When the remote control is used to operate the

DVD video camera/recorder, this receiver will

receive the infrared signal.

2 Lens cap string attachment hole (P. 34)

3 Recording indicator (P. 101)

The red indicator will light during recording.

4 Stereo microphone (P. 79)

5 Optical 18× zoom lens (DZ-MV550E)

Optical 10x zoom lens (DZ-MV580E)

(P. 59)

6 Lens hood (P. 60)

Always remove this lens hood when using

generally available tele-conversion or wide-

conversion lens.

7 Lens cover (P. 36)

You can replace the lens cover with either of the

two covers provided.

8 Zoom lever (P. 59)

Push the lever to the T side for telephoto, or to

the W side for wide-angle.

9 Accessory shoe

Only for DZ-MV580E:

The optional video flash, etc. can be attached

here. (See the instruction manual of device to be

attached for details.)

10 External microphone jack (P. 79)

11 AV output jack (P. 80)

12 2.5" type liquid crystal display (inside)

(P. 38)

13 QUICK MODE switch (P. 66)

To switch the menu display on screen between

Normal mode and Quick mode.

14 BATTERY EJECT switch (P. 43)

The BATTERY EJECT switch is located on the

bottom of this DVD video camera/recorder:

Slide it when removing the battery.

A/V

MIC

BATTERY EJECT

14

12 13

56 89

(Inside the cover)

(Bottom)

10 11

123 4

7

Although the external appearances of

DZ-MV550E and DZ-MV580E are different, the

method of operating both models is identical.

DZ-MV580E illustrations are used in this

manual.

English

19

15 Viewfinder (P. 38)

16 Diopter control (P. 38)

To adjust the focus of image appearing in the

viewfinder. (Pull out the viewfinder.)

17 ACCESS/PC indicator (P. 8, 52, 53)

Will blink or light when the disc in DVD video

camera/recorder is accessed (write or read is

executed) or the DVD video camera/recorder

is connected to PC.

18 DISC EJECT button (P. 47)

Press down and release this button to open the

disc guide.

19 Disc insertion block (P. 47)

20 CARD ACCESS indicator (P. 8, 53)

21 Card insertion block (P. 50)

22 Battery attachment platform (P. 43)

23 Record button (REC) (P. 52)

24 Power switch (P. 51, 52, 53)

25 LOCK switch (P. 53)

It is recommended that you set the LOCK

switch to (to the left) to prevent the power

switch in the “O VIDEO” position from

accidentally moving to “N PHOTO”.

26 Speaker (P. 61)

27 Hand strap (P. 33)

15 16 17 2118

22 23 25 2726

20

24

19

English

20

28 FULL AUTO button (P. 77)

To switch the DVD video camera/recorder to

full automatic.

29 FOCUS button (P. 74)

To switch between manual focus and auto-

focus.

30 EXPOSURE button (P. 76)

Press this button to adjust the exposure.

31 BLC (backlight compensation) button

(P. 54)

Press this button when subject is being lighted

from rear.

32 DISC NAVIGATION button (P. 103)

33 SELECT button (P. 106)

34 MENU button (P. 40, 87, 109)

Press this button to display the menu for setting

camera functions and Disc Navigation.

35 DISPLAY (Screen display) button (P. 65)

Press this button to display the details of image

being played back or camera setting status, or

switch the display off.

36 Volume control buttons (VOL)/ S R buttons

(P. 61, 74, 76)

To adjust the volume of sound from speaker,

etc.

37 RESET button (P. 178)

To reset all settings to defaults (status when the

DVD video camera/recorder was shipped

from the factory)

38 PC connection terminal (TO PC)

39 Joystick (P. 40, 61, 87, 89)

Move the joystick to select a scene or menu

item, and then press the center (A) to play

back the scene, pause it, or designate an option

of the menu.

40 Stop/cancel button (P. 22, 61, 103)

To end playback or cancel setting of menu.

28 29 30 31 32 33 34

4036 37 38 3935

La pagina sta caricando ...

Hitachi DZ-MV550E Manuale utente

Questo manuale è adatto anche per

Hitachi DZ-MV550E Manuale utente

in altre lingue

Documenti correlati

Altri documenti