Samsung LE27T5 Owner's Instructions Manual

LCD TV

LE23T5

LE27T5

LE32T5

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

This device is a Class B digital apparatus.

Register your product at www.samsung.com/global/register

BN68-00860C-03

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating a Samsung products,

please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung,

veuillez contacter le Service Consommateurs Samsung.

Kontakt zu Samsung

Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben,

wenden Sie sich bitte an den Samsung-Kundendienst.

Contact Samsung wereldwijd

Wanneer u suggesties of vragen heeft met betrekking tot Samsung producten,

gelieve contact op te nemen met de consumenten dienst van Samsung.

Contacte con SAMSUNG WORLD-WIDE

Si tiene alguna pregunta o comentario referente a nuestros productos,

por favor contacte con nuestro Servicio de Atención al Cliente.

Contacte SAMSUNG GLOBAL

Se tem algumas dúvidas ou comentários sobre os produtos Samsung,

contacte por favor a nossa linha de apoio a clientes Samsung.

Contatta SAMSUNG WORLD-WIDE

Se avete commenti o domande sui prodotti Samsung,

contattate il Servizio Clienti Samsung.

Country

BELGIUM

CZECH REPUBLIC

DENMARK

FINLAND

FRANCE

GERMANY

HUNGARY

ITALIA

LUXEMBURG

NETHERLANDS

NORWAY

POLAND

PORTUGAL

SLOVAKIA

SPAIN

SWEDEN

U.K

Customer Care Center

☎

02 201 2418

844 000 844

38 322 887

09 693 79 554

08 25 08 65 65 (€ 0,15/min)

01805 - 121213 (€ 0,12/min)

06 40 985 985

199 153 153

02 261 03 710

0900 20 200 88 (€ 0.10/min)

231 627 22

0 801 801 881

80 8 200 128

0850 123 989

902 10 11 30

08 585 367 87

0870 242 0303

Web Site

www.samsung.com/be

www.samsung.com/cz

www.samsung.com/dk

www.samsung.com/fi

www.samsung.com/fr

www.samsung.de

www.samsung.com/hu

www.samsung.com/it

www.samsung.lu

www.samsung.com/nl

www.samsung.com/no

www.samsung.com/pl

www.samsung.com/pt

www.samsung.com/sk

www.samsung.com/es

www.samsung.com/se

www.samsung.com/uk

BN68-00860C-02Cover.qxd 1/23/06 6:00 AM Page 1

Precautions When Displaying a Still Image

Astill image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center

of the screen caused by the difference of light emission on the screen.

Playing a DVD or a game console may cause a similar effect to the screen.

Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Précautions à prendre lors de l'affichage d'une image fixe

Une image fixe peut causer des dommages irrémédiables à l'écran du téléviseur.

• N'affichez pas une image fixe sur l'écran LCD plus de 2 heures. Cela pourrait provoquer une rémanence de l'image à l'écran.

Cette rémanence de l'image est également appelée "brûlure de l'écran".

Pour éviter une telle rémanence de l'image à l'écran, réduisez la luminosité et le contraste de l'écran lorsque vous laissez une image fixe affichée.

• Regarder l'écran LCD du téléviseur en format 4:3 pendant une longue période peut laisser des traces de bordures à gauche, à

droite et au centre de l'écran, à cause de la différence d'émission de lumière sur l'écran.

La lecture d'un DVD ou l'utilisation d'une console de jeu peut avoir un effet similaire sur l'écran.

Les dommages provoqués par les effets qui précèdent ne sont pas couverts par la garantie.

• L'affichage d'images fixes de jeux vidéo et d'ordinateurs pendant plus longtemps qu'une période spécifique peut provoquer des rémanences.

Pour éviter cela, réduisez la "luminosité" et le "contraste" lors de l'affichage d'images fixes.

Vorsichtsmaßnahmen beim Anzeigen von Standbildern

Ein Standbild kann zu einer dauerhaften Beschädigung des Fernsehbildschirms führen.

• Zeigen Sie kein Standbild länger als 2 Stunden auf dem LCD-Monitor an, da das Bild auf diese Weise einbrennen kann.

Das Einbrennen von Standbildern wird auch als “Bildkonservierung” bezeichnet.

Sie können das Einbrennen vermeiden, indem Sie die Helligkeit und den Kontrast des Monitors beim Anzeigen von Standbildern verringern.

• Bei Wiedergabe im Format 4:3 über einen längeren Zeitraum können bedingt durch die unterschiedliche Lichtemission

Nachbilder der Ränder links, rechts und in der Mitte des Bildschirms auftreten.

DVD- oder Spielekonsole-Wiedergabe können einen ähnlichen Effekt verursachen.

Schäden, die durch die o. g. Effekte verursacht wurden, unterliegen nicht der Garantie.

• Die kontinuierliche Anzeige von Standbildern von Videospielen oder vom PC über einen gewissen Zeitraum hinaus kann partielle Nachbilder

verursachen. Um diesen Effekt zu verhindern, verringern Sie Helligkeit und Kontrast, wenn Sie Standbilder anzeigen möchten.

Voorzorgsmaatregelen bij weergave van stilstaand beeld

Stilstaande beelden kunnen permanente schade aan uw TV-scherm toebrengen.

• Laat niet langer dan 2 uur een stilstaand beeld op het LCD-scherm staan, dat kan namelijk beeldretentie veroorzaken.

Beeldretentie wordt ook wel inbranden genoemd.

Verlaag bij de weergave van een stilstaand beeld de helderheid en het contrast om beeldretentie te voorkomen.

• Als u gedurende langere tijd naar uw LCD-tv kijkt terwijl het beeld in 4:3-formaat wordt weergegeven, kunnen aan de linker- en

rechterkant en in het midden van het scherm randen achterblijven. Dit wordt veroorzaakt door de verschillen in lichtemissie op

het scherm. Het afspelen van een dvd of een computerspel kan hetzelfde effect hebben.

Schade ontstaan door het bovengenoemde effect valt niet onder de garantie.

• Het gedurende langere tijd weergeven van stilstaande beelden van dvd’s of computerspellen kan (gedeeltelijke) scherminbranding tot gevolg

hebben. Om dit te voorkomen kunt u tijdens het weergeven van stilstaande beelden de helderheid en het contrast verminderen.

Precauciones al mostrar en la pantalla una imagen fija

La imagen fija puede causar daños permanentes en la pantalla del televisor.

• No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en la pantalla.

Este fenómeno de retención de imágenes también se denomina "quemadura de pantalla". Para evitar que se produzca esa persistencia de la

imagen, reduzca el nivel de luminosidad y de contraste de la pantalla cuando muestre imágenes fijas.

• El uso del televisor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en las partes izquierda,

derecha y central de la pantalla debido a las diferencias en la emisión lumínica de la pantalla.

Reproducir un DVD o una videoconsola puede causar un efecto similar en la pantalla.

La garantía no cubre estos daños.

• Ver imágenes fijas de videojuegos y PC durante más tiempo del indicado puede producir imágenes fantasma parciales.

Para evitar este efecto, reduzca el 'brillo' y el 'contraste' cuando vea imágenes fijas.

Precauções a ter quando se vêem imagens fixas

Uma imagem fixa pode danificar permanentemente o ecrã do televisor.

• Uma imagem fixa não deve permanecer no painel LCD durante mais de 2 horas ecrã porque pode provocar o efeito de retenção de

imagem no ecrã. Esta retenção de imagem também é conhecida como "queimadura de ecrã".

Para evitar a retenção de imagem, diminua o grau de luminosidade e de contraste do ecrã quando visualizar uma imagem fixa.

• Utilizar o televisor LCD em formato 4:3 durante um longo período de tempo pode deixar vestígios de margens na parte

esquerda, direita e frontal do televisor devido a diferenças de emissão de luz do ecrã.

Reproduzir um DVD ou ligar uma consola de jogos pode causar efeitos semelhantes no ecrã.

Os danos causados pelo efeito acima mencionado não estão cobertos pela garantia.

• Visualizar imagens fixas de jogos de vídeo ou de PC durante um longo período de tempo pode produzir imagens parciais depois da visualização.

Para evitar este efeito, reduza a "luminosidade" e o "contraste" quando visualizar imagens fixas.

Precauzioni da adottare quando si visualizza un’immagine fissa

Un’immagine fissa può causare danni permanenti allo schermo TV.

• Non visualizzare un’immagine fissa sul pannello LCD per oltre 2 ore poiché può causare la ritenzione dell’immagine sullo schermo.

Il fenomeno di ritenzione dell'immagine è anche noto come "bruciatura dello schermo". Per evitare il fenomeno di ritenzione dell'immagine,

ridurre il grado di luminosità e di contrasto dello schermo quando si visualizza un’immagine fissa.

• Su un TV LCD, l’uso del formato 4:3 per un periodo prolungato può lasciare traccia dei bordi sulla parte sinistra, destra e

centrale del video a causa delle differenti emissioni luminose dello schermo.

La riproduzione di un DVD o l’uso di una console per videogiochi può causare effetti analoghi sullo schermo.

Questo tipo di danni non è coperto dalla Garanzia.

• La visualizzazione prolungata di immagini fisse da videogiochi e PC può causare la visualizzazione di immagini residue parziali.

Per evitare questo problema, ridurre la 'luminosità' e il 'contrasto' mentre si visualizzano immagini fisse.

Still-SEOGU.qxd 11/8/05 12:30 AM Page 1

English-1

English

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts .............................................................. 2

Installing the Stand .................................................. 2

Installing the Wall Mount Kit ................................ 2

Viewing the Control Panel ........................................ 3

Viewing the Connection Panel.................................. 4

Viewing the Remote Control .................................... 5

Installing Batteries in the Remote Control................ 6

Switching On and Off................................................ 6

Placing Your Television in Standby Mode ................ 6

Plug & Play .............................................................. 6

SETTING THE CHANNELS

Storing Channels Automatically................................ 7

Storing Channels Manually ...................................... 8

Editing the Channels ................................................ 8

SETTING THE PICTURE

Changing the Picture Standard ................................ 9

Adjusting the Custom Picture .................................. 9

Changing the Colour Tone........................................10

Resetting the Picture Settings to the

Factory Defaults........................................................ 10

Changing the Picture Size........................................ 10

Digital Noise Reduction / Dynamic Contrast ............ 11

Viewing the Picture In Picture (PIP) ........................ 11

SETTING THE SOUND

Changing the Sound Standard ............................12

Adjusting the Sound Settings ..............................12

Adjusting the Volume Automatically ....................12

Listening to the Sound of the Sub Picture............13

SETTING THE TIME

Setting and Displaying the Current Time..............13

Setting the Sleep Timer........................................13

Switching the Television

On and Off Automatically......................................14

SETTING THE OTHERS

Choosing Your Language ....................................14

Using the Energy Saving Feature ........................15

Setting the Blue Screen Mode /

Selecting the Melody ..........................................15

Selecting the Source ............................................15

Editing the Input Source Names ..........................16

USING THE TELETEXT FEATURE

Teletext Decoder ..................................................16

Displaying the Teletext Information ......................17

Selecting a Specific Teletext Page ......................17

Using Fastext to Select a Teletext Page ..............18

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ......................................18

Display Modes ......................................................18

Setting the PC ......................................................19

RECOMMENDATIONS FOR USE

Troubleshooting:

Before Contacting Service Personnel ..................20

Technical and Environmental Specifications ......20

Symbol Press Important Note One-Touch

Button

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 1

English-2

CONNECTING AND PREPARING YOUR TV

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

M4 X L16

Remote Control &

Batteries (AAA x 2)

Power Cord Cover-Bottom Stand Screw X 4



Owner’s Instructions

 Warranty card 

Service Network Card

 Safety Guide  Registration Cards

< 2 >< 3 >

1. Place the TV faced down on a soft cloth or cushion on a table.

2. Put the stand into the hole at the bottom of the TV.

3. Insert screw into the hole indicated and tighten.

Installing the Stand

Wall mount items (sold separately) allow you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the Wall Mount

items. Contact a technician for assistance when installing the wall mounted bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others

if you elect to install the TV on your own.

Installing the Wall Mount Kit

Warranty card / Service Network Card / Safety Guide / Registration Cards (Not available in all locations)

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 2

English-3

Viewing the Control Panel

SOURCE

Toggles between all the available input sources

(TV, Ext.1, Ext.2, AV, S-Video, Component, PC,

DVI). In the on-screen menu, use this button as you

use the

ENTER button on the remote control.

MENU

Press to see an on-screen menu of

your TV’s features.

Press to decrease or increase the volume.

In the on-screen menu, use the buttons

as you use the

 and  buttons on the remote

control.

Press to change channels.

In the on-screen menu, use the buttons

as you use the

 and  buttons on the remote

control. (Without the Remote Control, You can turn

on TV by using the Channel buttons.)

(HEADPHONE JACK)

Connect a set of external headphones to this jack

for private listening.

(Power)

Press to turn the TV on and off.

Power Indicator

Blinks and turns off when the power is on and lights

up in stand-by mode.

Speakers

Remote Control Sensor

Aim the remote control towards this spot on the TV.

The product colour and shape may vary depending on the model.

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 3

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

Connecting Component Devices (DTV/DVD)

- Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other

ends to corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)

and connect the DTV (or DVD) to component connector (“P

R”, “PB”, “Y”) on your set.

- The P

R, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and

R-Y or Y, Cb and Cr.

- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio

out connectors on the DTV or DVD.

English-4

Viewing the Connection Panel

Power Input

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

BN68-00860C-02Eng.qxd 11/8/05 1:49 AM Page 4

English-5

Connecting External A/V Devices

-

Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such as VCR, DVD or Camcorder.

- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio

out connectors on the A/V device.

Connecting Set-Top Box, VCR or DVD

- Connect the VCR or DVD SCART cable (optional) to the SCART connector of the VCR or DVD.

Connecting DVI

- Connect the DVI connector to the DVD connector.

- Connect the stereo audio cable (optional) to "R - AUDIO - L" on the rear of your set and the other ends to the corresponding

audio out connectors on the A/V device.

- DVI does not support PC function.

Connecting Computer

- Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the

Video Card of your computer.

- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the

sound card on your computer.

Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

Television Standby button

Number buttons for direct

channel access

One/Two-digit channel selection

Volume increase

Volume decrease

Temporary sound switch-off

Displays the main on-screen menu

Sound mode selection

Sound effect selection

Press to automatically store

selected TV/cable channels

Use to store and delete

channels to/from memory

Picture freeze

Selects the TV mode directly

Previous channel

P: Next channel

P: Previous channel

Available source selection

Use to see information on the

current broadcast

Exit the on-screen menu

Control the cursor in the menu

Picture size selection

Picture effect selection

Picture-In-Picture On/Off

Automatic Power-off

Selects the PC mode directly

Teletext Functions

Teletext hold

Teletext display/mix both

teletext information and the

normal broadcast

Teletext index

Teletext store

Teletext sub page

Exit from the teletext display

P: Teletext next page

P: Teletext previous page

Teletext mode selection (LIST/FLOF)

Teletext reveal

Teletext cancel

Teletext size selection

Fastext topic selection

The performance of the remote control may be affected by bright light.

Viewing the Remote Control

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 5

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the POWER button on the front of the set.

The programme that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus

are to be displayed.

4. To switch your set off, press the POWER button again.

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode

can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER button on the remote control.

The screen is turned off and a red standby indicator appears on the front of your set.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel

up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial.

Switching On and Off

Placing Your Television in Standby Mode

When the TV is initially powered on, several basic settings proceed

automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control.

The message “Plug & Play” is displayed.

2. Select the appropriate language by pressing the  or  button.

Press the

ENTER button to confirm your choice.

3. The message “Check antenna input.” is displayed with “OK” selected.

Press the

ENTER button.

Please check that the antenna cable is connected correctly.

Plug & Play

English-6

1. Slide the cover out completely.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the

remote control for a long time. The remote control can be used up to about 23 feet from

the TV. (Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Installing Batteries in the Remote Control

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 6

English-7

 Language: Select your language.

 Country: Select your country.

 Auto Store: Automatically scans for and stores channels available in the local area.

 Clock Set: Sets the current time for the TV clock.

SETTING THE CHANNELS

- Storing Channels Automatically (Refer to page 7)

- Storing Channels Manually (Refer to page 8)

- Editing the Channels (Refer to page 8)

If you want to reset this feature...

1. Press the MENU button to display the menu.

Press the  or 

button

to select “Setup”, then press the ENTER button.

2. Press the ENTER button again, to select “Plug & Play”.

3. This will change or reset the settings.

You can scan for the frequency ranges available to you (and availability depends on your country).

Automatically allocated programme numbers may not correspond to actual or desired programme

numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu.

Press the

 or  button to select “Channel”, then press the ENTER button.

2. Press the ENTER button to select “Country”.

3. Select the appropriate country by pressing the  or  button.

Press the

ENTER button to confirm your choice.

4. Press the  or  button to select “Auto Store”, then press the ENTER button.

5. Press the ENTER button.

The TV will begin memorizing all of the available channels.

Press the ENTER button at any time to interrupt the memorization process and return to the “Channel” menu.

6. After all the available channels are stored, the “Sort” menu reappears.

Storing Channels Automatically

4. Select the appropriate country by pressing the  or  button.

Press the

ENTER button to confirm your choice.

5. The “Auto Store” menu is displayed with the “Start” selected.

Press the

ENTER button.

The channel search will start and end automatically.

After all the available channels are stored, the “Clock Set” menu appears.

Press the ENTER button at any time to interrupt the memorization process.

6. Press the ENTER button.

Select the “Hour” or “Minute” by pressing the

 or 

button.

Set the “Hour” or “Minute” by pressing the

 or 

button.

You can also set the hour and minute by pressing the number buttons on the

remote control.

7. Press the ENTER button to confirm your setting.

Channels can be stored automatically by simply pressing the AUTO PROG. button on

the remote control.

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 7

English-8

You can store up to 100 channels, including those received via cable networks.

When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you wish to identify.

1. Press the MENU button to display the menu.

Press the

 or  button to select “Channel”, then press the ENTER button.

2. Press the  or  button to select “Manual Store”, then press the ENTER button.

3. Press the ENTER button to select “Programme”.

4. To assign a programme number to a channel, find the correct number by pressing the  or  button

and then press the

ENTER button.

You can also set a programme number by pressing number buttons on the remote control.

5. Press the  or  button to select “Colour System”, then press the ENTER button.

6. Select the colour standard required by pressing the  or  button then, press the ENTER button.

7. Press the  or  button to select “Sound System”, then press the ENTER button.

8. Select the sound standard required by pressing the  or  button, then press the ENTER button.

If there is an abnormal sound or no sound, re-select the sound system required.

9. If you know the number of the channel to be stored, press the  or  button to select “Channel”.

Press the

ENTER button. Select C (Air channel) or S (Cable channel) by pressing the  or  button.

Press the

 button to select channel. Select the required number by pressing the  or  button and then

press the

ENTER button.

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)

You can also set a channel number by pressing number buttons on the remote control.

10. If you do not know the channel numbers, press the  or  button to select “Search”. Press the

ENTER button. Search by pressing the  or  button and then press the ENTER button.

11. Press the  or  button to select “Store”. Press the ENTER button to select “OK”.

12. Repeat steps 3 to 11 for each channel to be stored.

 Programme: Selects a program number for the channel.

 Colour System: Sets the colour supporting system.

 Sound System: Sets the sound supporting system.

 Channel: Selects a channel.

 Search: Scans for the frequency value for the channel.

 Store: Saves your settings.

Storing Channels Manually

You can exclude the channels you chose from the channels you scanned. When you scan through

the stored channels, those you have chosen to skip are not displayed.

All channels that you do not specifically choose to skip are displayed during scanning.

1. Use the number buttons to directly select the channel that will be added or deleted.

2. Press the MENU button to display the menu.

Press the

 or  button to select “Channel”, then press the ENTER button.

3. Press the  or  button to select “Add/Delete”, then press the ENTER button.

4. Repeatedly pressing the ENTER button will alternate between add channel and delete channel.

5. Press the P/ buttons to switch to the appropriate channel, then repeat above.

6. Press the EXIT button to exit.

You can view any channel (including an erased channel) by using the number buttons on the remote control.

Editing the Channels

You can also add or delete channel by simply pressing the ADD/DEL button on the

remote control.

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 8

English-9

SETTING THE PICTURE

You can select the type of picture which best corresponds to your

viewing requirements.

1. Press the MENU button to display the menu. Press the  or 

button to select “Picture”, then press the ENTER button.

2.

Press the ENTER button again, to select “Mode”.

3.

Press the ENTER button again, to select “Mode”.

4.

Press the

 or 

button to select the desired picture effect.

Press the

ENTER

button.

5.

Press the EXIT button to exit.

 Dynamic: Selects the picture for high-definition in a bright room.

 Standard: Selects the picture for optimum display in a normal environment.

 Movie: Selects the picture for comfortable display in a dark room.

 Custom: Select to view your favorite display settings.

(Refer to “Adjusting the Custom Picture” on page 9)

You can also press the

P.MODE button on the remote

control to select one of the

picture settings.

The Picture mode must be adjusted separately for each input source.

You can return to the factory defaults picture settings by selecting the “Reset”.

(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 10)

Changing the Picture Standard

 Contrast: Adjusts the lightness and darkness between objects and the background.

 Brightness: Adjusts the brightness of the whole screen.

 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

 Colour: Adjusts the colours, making them lighter or darker.

 Tint: Adjusts the colour of objects, making them more red or green for a more natural look.

Your set has several settings which allow you to control picture quality.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 4 on page 9.

2.

Press the

 or  button

to select a particular item.

Press the

ENTER

button.

3.

Press the

 or  button

to decrease or increase the value of a

particular item.

Press the ENTER button.

4.

Press the EXIT button to exit.

Adjusting the Custom Picture

The adjusted values are stored according to the selected Picture mode.

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 9

English-10

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 4 on page 9.

2. Press the  or  button to select “Reset”, then press the

ENTER button.

3.

Press the EXIT button to exit.

The “Reset” will be set for each picture mode.

Resetting the Picture Settings to the Factory Defaults

In PC, Component and DVI Mode, only “16:9” and “4:3” mode can be adjusted.

(The “Zoom”, “Panorama” mode is not supported.)

Select by pressing the  or  buttons.

Use the  or  button to move the picture up and down.

After selecting , use the  or  button to magnify or reduce the picture size in

the vertical direction.

 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

 Panorama: Adjusts 16:9 to 4:3 in a natural way as for normal broadcasting.

 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

 4:3: This is the default setting for a video movie or normal broadcasting.

You can select the picture size which best corresponds to your

viewing requirements.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the

ENTER button.

2. Press the  or  button to select “Size”, then press the

ENTER button.

3. Select the required option by pressing the  or  button.

Press the

ENTER

button.

4.

Press the EXIT button to exit.

Changing the Picture Size

You can select the most comfortable colour tone to your eyes.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 4 on page 9.

2. Press the  or  button to select “Colour Tone”, then press the

ENTER button.

3.

Press the

 or  button

to select the desired colour tone setting.

Press the

ENTER

button.

4.

Press the EXIT button to exit.

Changing the Colour Tone

 Cool2: Makes the colour temperature

bluer than “Cool1” menu.

 Cool1: Makes whites bluish.

 Normal: Keeps whites white.

 Warm1: Makes whites reddish.

 Warm2: Makes the colour temperature

redder than “Warm1” menu.

The adjusted values are stored according to the selected Picture mode.

You can select these options

by simply pressing the

P.SIZE

button on the remote control.

BN68-00860G-02Eng.qxd 3/30/06 6:55 PM Page 10

English-11

You can display a sub picture within the main picture of set

programme or video input. In this way, you can watch the picture of set

programme or video input from any connected equipment while watching

the main picture.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the

ENTER button.

2.

Press the  or  button to select “PIP”, then press the ENTER button.

3. Press the ENTER button again.

Press the

 or  button to select “On”, then press ENTER button.

PIP is available only in PC mode and will be unavailable for other modes.

4. Press the  or  button to select “Source List”,

then press

ENTER button. Select a source of the sub picture by

pressing the

 or  button and press the ENTER button.

The sub picture can serve different source selections based on what the main

picture is set to.

5. Press the  or  button to select “Position”, then press the ENTER

button. Select the position of the sub picture by pressing the  or 

button and then press the ENTER button.

6. Press the  or  button to select “Prog.” and then press the ENTER

button. You can select the channel that you want to view through sub

picture by pressing the

 or  button. Press the ENTER button.

The “Prog.” can be active when the sub picture is set to TV.

7. Press the EXIT button to exit.

Viewing the Picture In Picture (PIP)

 Source List:

Selecting a signal source (external A/V) for PIP.

 Position: Used to move the sub picture.

 Prog.: Used to Change the sub picture.

Digital NR:

If the broadcast signal received by your TV is weak, you can activate the

Digital Noise Reduction feature to help reduce any static and ghosting

that may appear on the screen.

Dynamic Contrast:

Dynamic Contrast detects the visual signal input and adjusts to create

optimum contrast.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the

ENTER button.

2. Press the  or  button to select “Digital NR” or

“Dynamic Contrast”. Press the

ENTER button.

3.

Press the  or  button to select “On” or “Off”. Press the ENTER button.

4. Press the EXIT button to exit.

These functions don’t work in PC mode.

Digital Noise Reduction / Dynamic Contrast

PIP Settings

(O: PIP operates, X: PIP doesn’t operate)

Press the PIP button on the

remote control repeatedly to

activate or deactivate the “PIP”.

PC

TV

O

Ext.1

O

Ext.2

O

AV

O

S-Video

O

Component

X

PC

X

DVI

X

Sub

Main

When the main picture is PC, the sub picture only supports “TV”, “Ext.1”, “Ext.2”, “AV”

and “S-Video”. The sub picture does not support other input sources in this case.

You may notice that the picture in the PIP window becomes slightly unnatural

when you use the main screen to view a game or karaoke.

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 11

English-12

Each broadcasting station has its own signal conditions, and so it is not

easy for you to adjust the volume every time the channel is changed.

This feature let you automatically adjust the volume of the desired

channel by lowering the sound output when the modulation signal is

high or by raising the sound output when the modulation signal is low.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the

ENTER button.

2. Press the  or  button to select “Auto Volume”, then press the

ENTER button.

3.

Press the  or  button to select “On” or “Off”. Press the ENTER button.

4. Press the EXIT button to exit.

Adjusting the Volume Automatically

The sound settings can be adjusted to suit your personal preferences.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the

ENTER button.

2. Press the  or  button to select “Equalizer”, then press the

ENTER button.

3.

Press the

 or  button

to select a particular item.

Press the

ENTER

button.

4. Press the  or  button to reach the required setting.

Press the

ENTER button.

5. Press the EXIT button to exit.

If you make any changes to these settings, the Sound Mode is automatically

switched to “Custom”.

Adjusting the Sound Settings

SETTING THE SOUND

You can select the type of the special sound effect to be used when

watching a given broadcast.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the

ENTER button.

2. Press the ENTER button again, to select “Mode”.

3. Select the required sound effect by pressing the  or  button repeatedly

and then press the

ENTER button.

4. Press the EXIT button to exit.

 Standard: Selects the normal sound mode.

 Music: Emphasizes music over voices.

 Movie: Provides live and full sound for movies.

 Speech: Emphasizes voices over other sounds.

 Custom: Selects your custom sound settings.

(Refer to “Adjusting the Sound Settings” on page 12)

Changing the Sound Standard

You can also select these

options by simply pressing the

S.MODE button on the remote

control.

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 12

English-13



During the PIP feature is activating, you can listen to the sound of the

sub picture.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the

ENTER button.

2. Press the  or  button to select “Sound Select”, then press the

ENTER button.

3. Press the  or  button to select “Sub”. Press the ENTER button.

4. Press the EXIT button to exit.

You can select this option when the “PIP” is set to “On”.

Listening to the Sound of the Sub Picture

 Main: Used to listen to the sound of the main picture.

 Sub: Used to listen to the sound of the sub picture.

SETTING THE TIME

You can set the TV’s clock so that the current time is displayed when

you press the INFO button. You must also set the time if you wish to

use the automatic On/Off timers.

1. Press the MENU button to display the menu. Press the  or  button to

select “Setup”, then press the

ENTER button.

2.

Press the  or  button to select “Time”, then press the ENTER button.

3. Press the ENTER button to select “Clock Set”.

4.

5.

Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again.

You can also set hour and minute by pressing the number buttons on the remote control.

To...

Move to “Hour” or “Minute”

Set the “Hour” or “Minute”

Press the

ENTER button.

Press the...

 or  button.

 or  button.

Setting and Displaying the Current Time

You can select a time period of between 30 and 180 minutes after which

the television automatically switches to standby mode.

1. Press the MENU button to display the menu. Press the  or  button to

select “Setup”, then press the

ENTER button.

2.

Press the  or  button to select “Time”, then press the ENTER button.

3. Press the  or  button to select “Sleep Timer”, then press the

ENTER button.

4. Press the  or  button repeatedly until the desired time appears.

(Off, 30, 60, 90, 120, 150, 180) Press the

ENTER

button.

5. Press the EXIT button to exit.

The TV automatically switches to standby mode when the timer reaches 0.

Setting the Sleep Timer

Press the SLEEP button on

the remote control repeatedly

until the appropriate time

interval appears.

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 13

English-14

You can set the On/Off timers so that the set will:

Switch on automatically and tune to the channel of your choice at

the time you select.

Switch off automatically at the time you select.

1. Press the MENU button to display the menu. Press the  or  button to

select “Setup”, then press the

ENTER button.

2. Press the  or  button to select “Time”, then press the

ENTER button.

3. Press the  or  button to select “On Timer”, then press the

ENTER button.

4. Press the  or  button to adjust “Hour”, then press the  button to

move to the next step. Set other items using the same method as above.

When finished, press the

ENTER button to return.

5. Press the  or  button to select “Off Timer”,

then press the

ENTER button.

6. Press the  or  button to adjust “Hour”, then press the  button to

move to the next step. Set other items using the same method as above.

When finished, press the

ENTER button to return.

7. Press the EXIT button to exit.

The first step is to set the television’s clock.

You can also set hour and minute by pressing the number buttons on the remote control.

The "Setup" setting must be set to "On" in order for the timers to work.

Switching the Television On and Off Automatically

SETTING THE OTHERS

When you start using your set for the first time, you must select the

language which will be used for displaying menus and indications.

1. Press the MENU button to display the on-screen menu.

Press the

 or  button to select “Setup”, then press the

ENTER button.

2. Press the  or  button to select “Language”,

then press the

ENTER button.

3. Select a particular language by pressing the  or  button repeatedly.

Press the

ENTER button.

You can choose one of 21 languages.

4. Press the EXIT button to exit.

Choosing Your Language

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 14

English-15

This feature adjusts the brightness of TV so as to reduce the power

consumption. When you watching TV at night, set the "Energy Saving "

mode option to "High" so as to reduce the dazzling of your eyes as well

as the power consumption.

1. Press the MENU button to display the on-screen menu.

Press the

 or  button to select “Setup”, then press the

ENTER button.

2. Press the  or  button to select “Energy Saving”,

then press the

ENTER button.

3. Select the required option (Off, Low, Medium, High) by pressing

the

 or  button.

Press the

ENTER button.

4. Press the EXIT button to exit.

This function does not work in PC mode.

Using the Energy Saving Feature

Blue Screen:

If no signal is being received or the signal is very weak, a blue screen

automatically replaces the noisy picture background. If you wish to

continue viewing the poor picture, you must set the "Blue Screen"

mode to "Off".

Melody:

You can hear melody sound when the television is powered on or off.

1. Press the MENU button to display the menu. Press the  or  button to

select “Setup”, then press the

ENTER button.

2. Press the  or  button to select “Blue Screen” or “Melody”.

Press the

ENTER button.

3.

Press the  or  button to select “On” or “Off”.

Press the

ENTER button.

4. Press the EXIT button to exit.

Setting the Blue Screen Mode / Selecting the Melody

You can select among external sources connected to

your TV’s input jacks.

1. Press the MENU button to display the menu.

Press the

ENTER button, to select “Input”.

2. Press the ENTER button again, to select “Source List”.

When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2”

are activated in the “Source List”. “AV”, “S-Video”, “Component”, “PC”, “DVI”

are activated only when they are connected to your set.

3. Select the required device by pressing the  or  button.

Press the

ENTER button.

Selecting the Source

Press the SOURCE button on the remote control to toggel between all the available

source. TV mode can be selected by pressing the

TV or P / button on the

remote control but you cannot select it by pressing the

SOURCE button.

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 15

English-16

USING THE TELETEXT FEATURE

Most set channels carry “ teletext ”, pages of written

information that provide information such as:

Television programme times.

News bulletins and Weather forecasts.

Sports results.

Subtitles for the hard of hearing.

The teletext pages are organized according to six categories:

Part

A

B

C

D

E

F

Contents

Selected page number.

Broadcasting station identity.

Current page number or search status.

Date and time.

Text.

Status information.

Teletext Decoder

Name the device connected to the input jacks to make your input

source selection easier.

1. Press the MENU button to display the menu.

Press the

ENTER button, to select “Input”.

2. Press the  or  button to select “Edit Name”, then press the

ENTER button.

3. Press the  or  button to select the device that you wish to edit.

Press the

ENTER button.

4. Press the  or  button to select the required device.

Press the

ENTER button.

5. Press the EXIT button to exit.

Editing the Input Source Names

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 16

English-17

You can display teletext information at any time, but signal reception

must be good. Otherwise:

Information may be missing.

Some pages may not be displayed.

To activate the teletext mode and display the contents page:

1.

Using the P () or P () button, select the channel providing the

teletext service.

2.

Press the TTX/MIX () button to activate the teletext mode.

The contents page is displayed. It can be redisplayed at any time by pressing

the MENU () button.

3. Press the TTX/MIX () button again.

The actual broadcast will be displayed simultaneously with the teletext page

on the screen.

4. Press the TV() button again to exit from the Text display.

If any broken character appears while Text is being viewed, make sure that the

Text language is identical with the language in the “Setup” menu mode. If both languages

are different, select the same language with the Text language on the “Setup” menu.

Displaying the Teletext Information

Press the number buttons on the remote control to enter the page

number directly:

1.

Enter the three-digit page number listed in the contents by pressing the

corresponding numeric buttons.

2.

If the selected page is linked with several secondary pages, the secondary

pages are displayed in sequence. To freeze the display on a given page,

press the

()

. Press the

()

button again to resume.

3. Using the various display options:

To display...

Both teletext information and the normal broadcast

Hidden text (answers to quiz games, for example)

The normal screen

A secondary page, by entering its 4-digit number

The next page

The previous page

Double-size letters in the:

 Upper half of the screen

 Lower half of the screen

Normal screen

Press the...

TTX/MIX ( )

INFO ( )

ADD/DEL ( )

P

()

P

()

SLEEP

()

 Once

 Twice

 Three times

Selecting a Specific Teletext Page

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 17

English-18

The various topics included in the teletext pages are colour-coded, and can

be selected by pressing the coloured buttons on the remote control.

1.

Display the teletext contents page by pressing the

TTX/MIX ()

button.

2. Press the coloured button corresponding to the topic that you wish to

select (The available topics are listed on the status information line).

3. Press the Red button to display the previous page.

Press the Green button to display the next page.

4. Press the TV() button again to exit from the Text display.

Using Fastext to Select a Teletext Page

SETTING THE PC

The Windows display-settings for a typical computer are shown below. The actual screens on your PC

may be different depending upon your particular version of Windows and your particular video card.

Even if your actual screens look different, the same, basic set-up information will apply in almost all

cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. First, click on “Control Panel” on the Windows start menu.

2. When the control panel window appears, click on “Appearance and Themes” and a

display dialog-box will appear.

3. When the control panel window appears, click on “Display” and a display

dialog-box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution): Optimum- 1360 X 768

If a vertical-frequency option exists on your display settings dialog box, the correct

value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.

Setting up Your PC Software (Based on Windows XP)

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

DVI does not support PC function.

Separate and Composite modes are supported. SOG is not supported.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution.

The resolutions in the table are recommended. (All resolutions between the supported limits are supported)

Mode

IBM

VESA

LE27T5

LE32T5

VESA

LE23T5

Resolution

640 x 480

720 x 400

640 x 480

800 x 600

1024 x 768

1360 x 768

800 x 600

1024 x 768

1360 x 768

Horizontal

Frequency (kHz)

31.469

37.861

37.500

37.879

48.077

46.875

48.364

56.476

60.023

47.712

37.879

48.364

56.476

47.712

Vertical

Frequency (Hz)

59.940

70.087

72.809

75.000

60.317

72.188

75.000

60.000

70.069

75.029

60.015

60.317

60.000

70.069

60.015

Pixel Clock

Frequency (MHz)

25.175

28.322

31.500

40.000

50.000

49.500

65.000

75.000

78.750

85.800

49.500

65.000

75.000

85.800

Sync Polarity

(H/V)

- / -

- / +

- / -

+ /+

- / -

+ /+

- / -

+ /+

BN68-00860C-02Eng.qxd 11/7/05 6:53 AM Page 18

La pagina sta caricando ...

Samsung LE27T5 Owner's Instructions Manual

Questo manuale è adatto anche per

Samsung LE27T5 Owner's Instructions Manual

in altre lingue

Documenti correlati