MPMan PC24 Manuale del proprietario

PC24

1

1. PARTS OF THE CAMCORDER 2

2. PREPARING FOR USING 3

INSTALLING THE BATTERY 3

INSERTING THE MEMORY CARD 4

3. USING THIS CAMCORDER 4

T

URNING THE CAMCORDER ON AND OFF 4

CHANGE THE RECORD MODE 5

RECORDING A VIDEO CLIP 6

TAKING STILL IMAGES 6

RECORDING AUDIO 7

4. USING THE MENU IN RECORD MODE 8

M

ENU IN CAPTURE MODE 8

MENU IN VIDEO MODE 10

SETUP MENU 11

5.PLAYBACK 14

P

LAYING BACK MOVIE CLIPS 14

PLAYBACK STILL IMAGE 14

PLAYING BACK AUDIO FILES 15

DELETE FILES IN PLAYBACK MODE 16

6. MAKING CONNECTIONS 16

C

ONNECTING THE CAMCORDER TO A TV 16

CONNECTING THE CAMCORDER TO A PC 17

7. SOFTWARE INSTALLATION 18

8. TECHNICAL SPECIFICATIONS 20

2

1. Parts of the camcorder

1: LCD screen

2: joystick/OK button

3: Power/ charging LED

4: Shutter button

5: Display button

6: Mode button

7: Power button

8: Menu/Delete button

9: USB jack

10: TV out jack

11: Strap mount

12: SD card slot

13: Microphone

14: Speak er

15: Lens

16: Self-timer LED

17: Flash strobe 18: Battery cover

3

2. Preparing for using

Installing the Battery

1. Open the battery door.

2. Insert three AAA-size b atteries with the positive (+) and negative (-)

poles matching the directions indic ated on the battery cover.

3. Close the battery door

4

Inserting the Memory Card

1. Turn off the camcorder.

2. Find the SD card slot : it is at the bottom

of the camcorder.

3. Insert the memory card as illustrated.

• Never insert any other object which is

not a SD/MMC card into the camera’s

SD card slot. Doing so will cerate the risk of damaging to the

camera and the card.

• To release the memory card press the edge of the card gently.

3. Using this camcorder

Turning the Camcorder On and Off

Open the LCD panel the camcorder turns on and cl ose the LCD panel the

camcorder turns off.. You may turn the camcorder on and off by another

way:

5

1. Open the LCD panel. Press the POWER button to turn on the

camcorder.

2. Press the POWER button again to turn the camcorder off.

Change the record mode

There are four record modes in this camcorder.

1: Turn on the camcorder。

2: Press the MODE button to change the mode. Each time the MODE

button is pressed the mode icon is chang ed.

Display Ti tl e Description

Capture mode For taking still photos.

Video mode For recording movie clips.

Audio mode For recording audi o files.

Playback mode Preview the record files.

6

Recording a video clip

1: Turn on the camcorder and set the camcorder to video record mode

( ).

2: Zooming:

Moving the joystick upward or do wnward to zoom in or zoom out the screen.

The value of magnification lev e l ap pears on the LCD monitor.

3: Press the SHUTTER button to start recording. Push the joystick

rightward to pause and push it again to continue.

4: Press the SHUTTER again to end the r ecording. If the memory is full the

video camera will stop recording automatic ally.

• On the upper of the LCD monitor displays the recorded time.

Taking still images

1. Turn on the camcorder.

2. Press the MODE button to set the camcorder to capture mode, the

icon

appears on the LCD screen.

7

3. Zooming:

Moving the joystick up or do wn to zoom in or zoom out the

screen.

the value of magnification lev el appears on the LCD

monitor.

3. Hold the camcorder steady and then press the SHUTTER button

down to take a picture.

Recording audio

1: Turn the camcorder on and set it to audio record mode.

2: Press the SHUTTER button to start recording. Push the joystick

rightward to pause and push it again to continue.

3: Press the SHUTTER again to end the r ecording. If the memory is full the

video camera will stop recording a utomatic ally.

• On the center of the LCD monitor displays the recorded time.

• There is no menu in audio record mode.

8

4. Using the menu in record mode

When a menu is displa yed, the joystick is used to make the desired setting.

The audio record mode d oesn’t have a menu.

Menu in capture mode

1: Turn on the camcorder and set it to capture mode.

2: Press the MENU button to display the menu.

3: Move the joystick upward or downward to select an item.

4: Push the joystick rightward to enter the submenu.

5: Use the joystick to select the desired item.

6: Press the OK button to confirm the setting.

7: Press the MENU button to close the menu.

Capture menu list

Menu item Function

Resolution There are five options for choice:

[12M]4000x3000/ [5M] 2592x1944/ [3M] 2048x1 536 /

9

[1M]1024x768 /[VGA] 640X480.

Quality Select a lower image quality to decre ase the image size in

order to capture more images. There are three optio ns for

choice:[Super Fine] /[Fine] /[Normal].

Metering Change the metering method to change the brightness of

the picture.

[Center]: The exposure will be calculated b ased on light in

the center area and this is suitable for ge neral use.

[Multi]: The exposure will be calcul ated based on the

average light.

[Spot]: Only the spot in the center of the LCD screen will be

metered for light.

White

Balance

Adjust the white balance to suit different light sources.

There five items for option: [Auto]/ [Daylight]/ [Cloudy] /

[Fluorescent] / [Tungsten].

Exposure Set the exposure value manually to compensate for unusu al

lighting conditions suc h as indirect indoor lig hting, dark

backgrounds, and strong bac klighting. The exposure value

10

range is –2.0 to 2.0.

Driver

Mode

Use this item to set the camera to different mode: Off/

Self-timer 2s/ Self-timer 10s/ Burst

Effect Use this function to change the image’s color tone: Normal/

B&w/ Sepia / Negative/ Red/ Green/ Blue.

Date

Stamp

This function can be us ed to add a date to your pictures as

you take them. There are thre e items for opti on:

[Off]: Neither date nor time is added to the image.

[Date]: Add data to the image.

[Date& Time]:Add data and time to the image.

Menu in video mode

1: In video record mode press the MENU

button to display the menu.

2: Move the joystick upward or downward to select an

item.

3: Push the joystick rightward to enter the submenu.

4: Use the joystick upward or downward to select the desired item.

11

5: Press the OK button to confirm the setting.

6: Press the MENU button to close the menu.

Menu item Function

Movie Size Select small movie size to record long er time. There are

two items for option:[ 640x480/ 320X240.

Frame Rate Select low frame rate to record longer time. There are

two items for option: [High]/[ Low].

Metering See the details on page 9.

White Balance See the details on page 9.

Setup menu

You can set the system items in setup menu.

1: Turn the power on and press the MENU button to

display the menu.

2: Push the joystick rightward to select

[Setup].

3: Move the joystick upward or downward to select

an item.

4: Push the joystick rightward to enter the submenu.

5: Push the joystick upward or downward to select the desired item.

12

6: Press the OK button to confirm the setting.

7: Press the MENU button to close the menu.

Menu item Function

Sounds There are four items for option:

[Shutter]: Set the shutter sound on or off by pressing the

joystick RIGHT.

[Start-up]: Set the start-up sound. Press the joystick

RIGHT to change the sound. There are four options:

[None] / [1]/ [2] / [3].

[Beep]: Set the operation soun d on or off by pressing the

joystick RIGHT.

[Volume]: Adjust the sound v olume. You can change it

by pressing the joystick RIGHT.

Auto Review Adjust the review time after taking a picture. There are

three items for option: [Off]/ [1sec.]/ [3 sec.].

Power

frequency

Light Frequency should be set to either 60Hz or 50Hz

depending on your reg ion. [50HZ] / [60HZ].

Power save To save power, the camera is turned off automaticall y

13

after a period of time. There are three o ptions: [1min.] /

[3min.] / [5min.].

Date& Time Set the date and time.

Language Choose an language for dis playing the information on

the LCD.

TV Out TV Out should be set to either NTSC or PAL dependin g

on your region. [NT SC] /[PAL].

USB You can use this camera as a PC camera or removable

disk. [PCCAM]: Use as a PC camera;

[MSDC]: Use as a removable disk.

Start-up

Image

You can use your love d picture as the start-up image.

[Off]: No start-up image.

[System]: Use the default image as the start-up image.

[My image]: Use your loved image as th e start-up

image.

Format All data will be deleted including protected fil es. Be sure

to download important files to your computer before

formatting. [Yes]/ [ No].

14

Reset all To reset the entire menu and button operation settings

to initial default. [Yes]/ [ No].

5.Playback

Playing back movie clips

1: Set the camcorder to playback mode.

2: Push the joystick leftward or rightward to select the movie clips you want

to playback.

3: Press the OK button to start playing. Push the joystick upward to pause it

and push it again to continue. Push the jo ystick rightward to fast forward

and push the joystick leftward to back forward.

4: Press the MENU button to end the playing.

Playback still image

1: Set the camcorder to playback mode.

The latest recorded file appears on the LCD screen. If there are no

images stored, a message [No Image] appe ars.

15

2: Push the joystick leftward or rightward to preview the previous or next

image.

3: Zooming:

Moving the joystick upward to zoom in the image. When the picture is

enlarged press the OK button to lock the zoom ratio and th en you can

push the joystick up ward/do wn ward/Leftward/Right ward to browse the

details of the image. Press the MENU button to recover the picture to

initial size.

Playing back audio files

1: Set the camcorder to playback mode.

2: Push the joystick leftward or rightward to select the audio file you w ant to

playback.

3: Press the

16

Delete files in playback mode

1: Press the MENU button in playback mode.

2: Move the joystick upward or downward to select the item [Delete].

3: Push the joystick rightward to enter the submen u.[ One]: Delete current

file. [All]: Delete all files except locked files.

4: Move the joystick upward or downward to select the item.

5: Press the OK button to confirm the setting. A dialog box will appear.

Move the joystick upward or downward to select the item [Yes].

6: Press the OK button to delete the current file or all files.

6. Making connections

Connecting the Camcorder to a TV

When plug in the TV-out cable (suppl ied) to the camcorder output jack the

LCD screen turns black, Connect the camcorder to a TV and the TV screen

now performs as the camcorder LCD screen.

1. Connect the camcorder to a TV via the TV-out cable (suppli ed) 。

2. T urn on the TV and the camcorder, and then set the T V to “AV” mode.

17

3. When the camcorder is set to record mode, you can pr eview the

subjects you want to record on the TV screen.

4. When the camcorder is set to Playback mode, you can review all the

pictures, video and audio clips stored in the camera o n the TV.

Connecting the Camcorder to a PC

1: Set the USB mode to [MSDC] mode.

2:Connect the supplied USB cable to the computer's USB port and turn on

the video camera. A message “MSDC” appears on the screen when

connection to the computer has been successfull y completed.

3: Open [My Computer] or [Windows Explorer]. A "Removable D isk"

appears in the drive list. Double-click the "Re movab le Disk" icon to vie w its

contents. Files stored on the camera are located in the folder nam ed

"DCIM".

4: Copy the photos or files to your computer.

18

7. Software Installation

Installing the Software

The bundled software CD has the drivers and soft ware that come with

video camera. Insert the CD into your CD- ROM drive. The autorun menu

appears:

Install Driver

1:Click [Install Driver].

2:

Follow the on-screen instructions to install the drivers.

3: When the installation is finished it will create an icon

on the desktop.

19

How to use the PC Camera function

Please install the camera driver first.

Connect the camera to the computer with a

USB cable, double click the icon

to run

the program. If it was the first time you use

this function please select the item <

Preview> as in the illustratio n. And then you

can use it as the pc camera function.

If you want to change the imaging size, select <Video Captur e Pin> to

change the Output Size.

La pagina sta caricando ...

MPMan PC24 Manuale del proprietario

MPMan PC24 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti