Coway APM-1010DH Instructions Manual

Coway Air Purier

APM-1010DH

• This product is for domestic use only. It cannot be used in an overseas country where the power

voltage is dierent.

• Warranty card is included in this user’s manual.

• Read and save these instructions.

•

English / Français / Español / Deutsch / Italiano / Nederlands / 

FEATURES

An innovative ANTI-FLU HEPA™ lter system

Coway’s innovative ANTI-FLU HEPA™ captures micro particles and inactivates viruses up to

99.9 %. The lter system has been optimized to quickly remove pollutants from the air.

- This appliance is not a medical device.

Air purication & humidication combo system

This product provides hybrid functions where the air purication function removes ne dust,

viruses, and harmful gases, and the natural humidication function uses a humidication

lter.

Optimized humidication system

Both a humidication lter and a humidity sensor have been adopted to control the amount

of moisture supplied on the basis of the room temperature and the humidity condition.

Powerful & hygienic humidication performance

A vaporization-type humidication system has been adopted that supplies 450 ㎖ or more

moisture per hour.

Auto-o timer

You can select the timer(1hr, 4hr, and 8hr) so it automatically turns o when the desired time

has elapsed.

Selectable custom lters

A customized lter system has been adopted so that customers can select one of 3 types of

option lters: dust, new-house or old-house lters.

3-step automatic operation using the particle sensor

The pollution level of the air is represented in real-time through the particle sensor and the air

ow speed is automatically controlled on the basis of the surrounding pollution level when

the automatic operation is selected to minimize power consumption.

Air quality indicator

It shows the indoor air pollution level measured by the particle sensor. The color of air quality

indicator changes in real-time according to the indoor air pollution level.

3-step hygiene humidication system

It consists of humidication, anti-scale and anti-bacterial lters and protects the water in the

water tank and the tray from being contaminated.

A

n

t

i

F

l

u

H

E

P

A

F

il

t

e

r

FOR INFORMATION

MAINTENANCE

HOW TO USE

OTHERS

| 03 |

SAFETY INFORMATION

Danger

Warning

Caution

| 07 |

PARTS NAME

| 09 |

AIR PURIFICATION PROCESS

| 10 |

AIR HUMIDIFICATION

PROCESS

| 10 |

PREPARATIONS

| 12 |

HOW TO USE

| 14 |

ADJUST PARTICLE SENSOR

| 15 |

FILLING UP THE WATER TANK

| 16 |

CLEANING METHOD

| 21 |

FILTER REPLACEMENT

| 23 |

NATURAL VAPORIZATION

HUMIDIFICATION

| 24 |

TROUBLESHOOTING

| 25 |

SPECIFICATION

CONTENTS

DEAR CUSTOMERS

Thank you for using the Coway air purier.

Please read the user’s manual to use and maintain the product correctly.

If you encounter a problem while using the product, you may easily solve the problem by

referring to the user’s manual. As this manual contains the product warranty card,

please keep it in a safe place.

2

1

FEATURES / CONTENTS

Coway

- Please keep the User’s Manual where it can be readily reached or found. -

SAFETY INFORMATION

The following information is for user

safety that should be observed.

It is to ensure user safety and prevent property damage.

Please read the precautions carefully and use the

product correctly.

for 220 V - 240 V use only for 120 V use only

Danger : Failing to follow the precautions below may result

in serious injury or even death.

• Do not use a damaged power plug or loose electric outlet.

• Please connect the power plug to a dedicated grounded electrical

outlet for 220 V - 240 V~ 50 Hz / 60 Hz.

• Do not move the product by pulling only the power cord.

• Do not handle the power plug with wet hands.

• Do not forcefully bend the power cord or place it under a heavy object

to prevent it from being damaged or deformed.

• Do not repeatedly connect and disconnect the power plug.

• If the electric outlet is wet, carefully unplug the product and let the

electric outlet dry completely before subsequent use.

• Make sure to unplug the product before repairing, inspecting or

replacing a part.

• Remove any dust or water from the power plug.

• Do not plug the product into an electrical outlet or power strip that

is being used by several other appliances. Use an electrical outlet

dedicated to the product.

• Unplug the system if it is not used for a long time.

• Do not attempt to repair or modify the power cord yourself.

• If the power cord is damaged, do not replace the cord yourself. Call a

service center to have it replaced.

• Do not install the product near a heating device.

• Do not install the product in locations exposed to moisture or water

(rainwater).

4

3

• Do not use the product in areas where ammable gases or combustible

materials are used or stored.

• Do not insert sharp objects such as a gimlet into the pollution sensor.

• If the product produces a strange noise, burning smell or smoke, unplug

it from the electrical outlet immediately and call our service center.

• Never place the product in water.

• Do not spray any ammable materials such as insecticides or air

fragrances near or into the air inlet.

• Do not disassemble, repair, or modify the product at your own

discretion.

• Do not place any containers with water, medicine, food, metallic objects

or ammable material on top of the product.

• Unplug the system before cleaning it.

• Clean by spraying water directly and do not clean the product using

benzene or thinner.

• Do not use the air purier in a factory or industrial setting where

machine oil may be present in the air.

• Do not eat the antibiotics in the water tray.

• Avoid external impacts to the water tank. A strong impact may damage

the water tank.

• Empty the water tray and the water tank before moving the product.

SAFETY INFORMATION | Danger

For Information

Warning : Failing to follow the precautions below may

result in considerable physical injury or property

damage.

• Do not insert ngers or foreign objects into the air inlet or outlet.

• Do not let children hang on to the product or climb on it.

• When removing the front cover, exercise caution that a part of

your body or any kind of object does not become stuck in the

top part of the product.

• This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure that they do not play

with the appliance.

• This appliance can be used by children aged from 8 years and

above.

SAFETY INFORMATION

6

5

Caution : Failing to follow the precautions below may result

in slight physical injury or property damage.

• Do not install the product on a sloped surface.

• Do not apply force or impact to the product.

• When the product is in use, maintain a distance of at least 20 cm

from the walls or adjacent objects and 30 to 60 cm above the

product.

• Install the product so that no obstacles block the circulation of

air around the product.

• Install the air purier away from strong articial lighting or direct

sunlight.

• Install the air purier at least 2 m away from electronic appliances

such as a TV.

• Do not install the air purier in a location exposed to direct

sunlight.

• Replace the lters according to the lter replacement cycles.

• Clean the Pre-lter with water regularly and dry it completely

before use.

For Information

SAFETY INFORMATION | Warning | Caution

Front / Top View

PARTS NAME

Air quality

indicator

Front cover

Air outlet

Front

humidication

lter

Handle

Particle sensor

Water tank

Rear

humidication

lter

Water tray

Indicators /

buttons

8

7

For Information

PARTS NAME

1

Air purication, humidication indicators

- When only the air purication indicator is

on : Since the water tank is empty, only the air

purication function is performed.

- When both the air purication and

humidication indicators are on : The

water tank is lled with water and both the

humidication and air purication functions

are performed.

* If the water tank is not installed or not properly

installed, the operation mode indicator blinks.

1

Mode button

Using the mode button, you can select the

operating mode in 3 steps in the following

order: Auto → Silent → Dust.

2

Airow speed button

Using the airow speed button, you can set the

airow speed in 4 steps in the following order:

Step 1 → Step 2 → Step 3 → Turbo (If you press

the airow speed button during an operating

mode, it switches to manual mode immediately).

3

Humidity button

Using the Humidity button, you can set the

humidity level in the following order: 40% →

50% → 60% → Continuous operation (The

congured humidity is only applied in Auto

mode).

4

O-timer button

Pressing the O-timer button changes the

indicator in the following order: “1hr → 4hr →

8hr”. If the o-timer is cancelled, all the indicator

lamps are turned o.

5

Air quality indicator

Represents the pollution level by

the color of the indicator.

Indication Part Operation Part

Clean: Blue

Low pollution level: Bright violet

High pollution level: Red

Medium pollution level: Dark violet

Indication part / Operation part

Power Button

1

Air purication,

humidication indicators

Mode indicator Airow indicator

Mode button

1

Airow speed button

2

Current/Selected humidity indicator O-timer indicator

Humidity button

3

O-timer button

4

Light sensor

AIR PURIFICATION PROCESS

Air purication system

3. Deodorization lter 4. ANTI-FLU HEPA™ lter

1. Pre-lter

2. Custom lter

Pre-lter

It removes relatively large dust and mold, human hair, pet hair, and so on.

Custom lter

Customers can select one of 3 types of custom lters according to their requirements:

dust, new-house or old-house lters.

Deodorization lter

The activated carbon particles of the Deodorization lter eectively eliminate food odors and unpleasant

household smells.

ANTI-FLU HEPA™ lter

Coway’s innovative ANTI-FLU HEPA™ captures micro particles and inactivates viruses up to 99.9 %. Natural

substances from Ginkgo and Japanese sumac trees destroy the protein on the surface of viruses.

It also eectively removes ne dust and cigarette smoke while the antibacterial and anti-mold functions of

the organic antibacterial materials eliminate germs and mold.

PREPARATIONS

10

9

AIR PURIFICATION PROCESS / AIR HUMIDIFICATION PROCESS / PREPARATIONS

How to Use

AIR HUMIDIFICATION PROCESS

1

Water tank

- Contains 3 L of water, provides an anti-bacterial eect and promotes the ion-exchange of water.

2

Water tray

- Supplies the appropriate amount of water from the water tank to the humidication lter and provides

an anti-bacterial eect.

3

Humidication lter

- The humidication lter absorbs water. As the puried air from the air outlet passes through the

humidication lter, naturally humidied air is generated.

1

Open the front cover.

Open the front cover by pulling it at the bottom.

- Take care when you do this because excessively pulling the top

or middle part of the front cover may damage the product.

2

Take the lter out and remove the plastic packaging.

Remove the plastic packaging from the lters except for the pre-lter and then install the lters

according to the order of the lters.

How to Install Filter

Tips

- Make sure to remove each lter’s plastic packaging before installing the lters.

- This product is for home use only. Use the product indoors only.

- When the unit is not in use, disconnect the power plug from the electric outlet.

- Check the front part of the lter when installing it.

* The lter order: Pre-lter → Custom lter → Deodorization lter→

ANTI-FLU HEPA™ lter

Humidifying air purication process

PREPARATIONS

1

Separate the water tank.

2

Separate the water tray as shown by the gure.

3

Install the humidication lter for which the plastic packaging has

been removed.

- Install the lter so that the thin lter faces the front and the thick

lter faces the back.

- Although the humidication lter has a front and a back, it does

not have a top and a bottom.

4

Install the water tray and the water tank in this order.

- The amount of moisture supplied by the humidication lter may decrease as it is contaminated by

scale. Clean the lter at least once a week (see p.17).

- If you do not want to use the humidication function, remove the humidication lter, dry it

completely in the shade and store it in a separate location.

- If the water tank or the water tray is not properly installed, the product will not work.

Front

Rear

Humidication lter

HOW TO USE

Turn the product on by pressing the Power button and select an airow

speed by pressing the Airow speed button.

Step 1 → Step 2 → Step 3 → Turbo

Turn the product on by pressing the Power button and select a mode by

pressing the Mode button.

Auto → Silent → Dust

▶

Auto mode

Automatically controls the airow speed (Step 1, 2, 3 and 4) according to the air pollution level

detected by the particle sensor in order to purify the air more eectively. This operating mode is

appropriate for general users.

Pollution level 1 Pollution level 2 Pollution level 3 or higher

Airow speed Step 1 Step 2 Step 3

▶

Silent mode

Minimizes the airow for the air purication or humidifying air purication operation to ensure a

quiet, pleasant environment. This mode is a low-noise and low power consumption mode.

- In Silent mode, the Airow speed indicator is turned o.

▶

Dust mode

This mode eectively removes any house dust in the room.

This mode maximizes the airow to remove the house dust from the air in the room.

The airow speed continually alternates between steps 3 and 1 regardless of the pollution level.

Airow speed step 3 continues for 10 minutes and then step 1 continues for 30 minutes. Airow

speed step 3 blows the house dust into the air and step 1 puries the air.

▶

Sleep mode (only when Auto mode is selected)

If the surrounding illumination is dark for more than 3 minutes, the unit automatically switches to

sleep mode, lowers the airow speed, noise and power consumption.

If the surrounding illumination is bright again for 5 minutes or longer, the unit resumes normal

operations.

In sleep mode, all displays except for the power indicator are turned o.

- Connect the power plug to the electrical outlet before operating the product.

- When the air purier is turned on, it automatically operates in Auto mode.

Tips

12

11

PREPARATIONS / HOW TO USE

How to Use

To Operate the Manual Mode

To Select the Auto Mode

HOW TO USE

Insert the water tank into the product until it clicks into place.

If the water tank is not completely installed, it may result in a water leakage or malfunction of the product.

2

Set a humidity level by pressing the humidity button.

- You can select Auto mode and adjust the airow speed even

during the humidifying air purication operation.

- The congured humidity is only applied in Auto mode.

1

To use the humidifying air purication function, ll the water tank

with water.

- If you ll the water tank with water, it is automatically detected

by water level sensor and the humidifying air purication

function starts. If the sensor detects that the water tank is

empty, the humidication indicator is turned o and the unit

automatically switches to the air purication operation.

Using the o timer function, you can select 1, 4 or 8 hours before the

unit is turned o.

- To cancel an o timer, press the o-timer button until the o-timer

indicator is turned o.

(1hr → 4hr → 8hr → cancel)

Precautions for installing the water tank

O timer ON/OFF

To use the humidifying air purication function

14

13

HOW TO USE / ADJUST PARTICLE SENSOR

ADJUST PARTICLE SENSOR

1

While the air purier is in operation, press and hold the Airow

speed and Mode buttons at the same time for 3 seconds or more.

2

The Airow speed indicator blinks at an interval of approximately

0.5 seconds.

3

Adjust the sensor sensitivity by pressing the Airow speed button.

The sensitivity of the sensor is represented by the blinking airow

speed indicator.

Step 1 Step 2 Step 3

Sensitive Normal Insensitive

4

When the Airow speed and Mode buttons are pressed and held

simultaneously for 2 seconds or more, the system returns to normal

operation, saving the sensitivity setting.

- If no button is pressed for 10 seconds, the current sensitivity is

automatically saved.

When the product is shipped, the pollution sensor is set to normal sensitivity. If the pollution level stays at

the highest level after 2 hours of operating or stays at the lowest level for more than 1 hour when the air

does not appear clean, users can adjust the sensitivity of the sensor.

3 seconds

2 seconds

How to Use

To ll the water tank with water

1

Separate the water tank from the side of the product by pulling the

separation catch.

2

Separate the water tank cap by turning it counterclockwise.

3

Fill the water tank with water and turn the water tank cap clockwise

until you hear a popping sound.

FILLING UP THE WATER TANK

Do not touch the anti-scale lter of the water tank cap as this may result in a problem with the

product performance.

16

15

FILLING UP THE WATER TANK / CLEANING METHOD

Separate the front cover from the unit and remove any dust attached

to the surface with a soft cloth or brush. Use a damp cloth if the

contamination is serious. (However, do not use abrasives.)

Use a dry, soft cloth to clean the product body. Use a damp cloth if the

contamination is serious. (However, do not use abrasives.)

2

Use a slightly damp cotton swab and lightly clean the lens, dust inlet

and outlet. Then use a dry cotton swab to remove any remaining

moisture.

- Without regular cleaning, the performance of the particle sensor

will deteriorate.

- The cleaning cycle diers depending on the operating

environment. When using the product in a dusty environment,

you will need to clean the sensor more often.

1

Open the particle sensor cover

on the right-hand side of the

product. First, clean the air inlet

and outlet vents and then the

particle sensor using a soft brush

or vacuum cleaner.

Clean the air inlet and outlet with a soft brush.

- Take care that no dust enters the air purier when cleaning it.

CLEANING METHOD

- Always unplug the unit before cleaning it.

- Do not use detergents that contain organic solvents (solvent, thinner, etc), bleach,

chlorine, or abrasives.

- Do not place the unit into water or spray water onto it.

Tips

Cleaning Air Inlet and Outlet (every 2 months)

Cleaning Particle Sensor (every 2 months)

Cleaning front cover

Cleaning the Unit (every 2~4 weeks)

Maintenance

Air outlet

Dust outlet

Dust inlet

1

Separate the water tank from the side of the product and open the water tank cap at the bottom of the

water tank by turning it counterclockwise. If there is any residual water in the water tank, empty the water

tank before cleaning it.

2

Separate the anti-scale lter from the water tank cap.

Add water and a small amount of neutral detergent into the water tank until approximately 1/3 of the

water tank is lled and close the cap by turning it clockwise. Shake the water tank holding it with both

hands as shown by the gure, so that all sides of the water tank can be washed.

- Since the water tank is large, you can clean it by putting your hand into the water tank.

- Do not add a neutral detergent into the water tank when the anti-scale lter is installed. This will

degrade the product performance.

3

Open the water tank cap by turning it counterclockwise and clean it

under owing water.

Wash the anti-scale lter under owing water and install it into the

water tank cap.

- Avoid external impacts to the water tank. A strong impact may

damage the water tank. This may result in water leakage.

- When closing the cap, fasten it rmly in the direction of CLOSE

(clockwise) until you hear a popping sound.

- If the cap is not completely fastened, it may result in a water leakage.

Cleaning the water tank (daily)

CLEANING METHOD

▶

+

Neutral

detergent

18

17

CLEANING METHOD

1

Separate the water tank from the product and separate the water tray from the side of the product by

pulling it.

- When you remove the water

tray as shown by the gure,

take care because there may

be residual water in the hole of

the catch.

2

Carefully separate the humidication lter from the water tray.

- When you separate the humidication lter, some water

absorbed by the lter can be extracted. Please take care of the

water.

Soak the humidication lter in warm water (40

℃

or lower) for at

least 20 minutes and softly wash it with a cleaning brush under

owing water.

- The period and intensity of the scale accumulation at the front of

the humidication lter may dier depending on the TDS of the

water. If the lter is whitened by the accumulated scale, wash it

under owing water.

4

Dry the water tank completely in a shady location to remove all

moisture before installing it.

- To operate in humidifying air purication mode: Remove any

moisture from outside the water tank, ll up the water tank

with water and install the water tank.

- To operate in air purication mode: Remove any moisture

from outside and inside the water tank and install the water

tank.

Cleaning the water tank (daily)

Cleaning the water tray (daily)

Maintenance

CLEANING METHOD

3

Separate the humidication lter, the blocking lm and the water tray cover from the water tray in this

sequence, and then wash the water tray with a damp, soft cloth or cleaning brush using a neutral detergent

under owing water. Wipe away the moisture from the water tray with a soft, dry cloth and dry it in the

shade.

4

Remove the anti-bacterial case from the water tray and clean it with a cleaning brush.

- Insert the anti-bacterial case into the water tray so that the arrow indicates the inside of the

humidication lter.

- Assemble the water tray cover and assemble the

blocking lm aligning it to the rail.

La pagina sta caricando ...

Coway APM-1010DH Instructions Manual

Coway APM-1010DH Instructions Manual

in altre lingue

Documenti correlati

Altri documenti