Electrolux EWF1495 Manuale utente

EWF 1495

147 103 101

The symbols you will see on some paragraphs of this booklet have the following meaning:

The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly

important for your safety or correct functioning of the appliance.

The information marked with this symbol provides additional instructions and practical tips on the use of

the appliance.

Tips and information about economical and ecological use of the machine are marked with this symbol.

Our contribution to the protection of the

environment: we use environmentally

friendly paper.

2

Dear customer,

Please read these operating instructions carefully

and pay particular attention to the safety notes

indicated in the first pages. We recommend that you

keep this instruction booklet for future reference and

pass it on to any future owners.

Washing hints 14

Sorting the laundry 14

Temperatures 14

Before loading the laundry 14

Maximum loads 14

Laundry weights 14

Removing stains 14

Detergents and additives 15

Internationnal wash code symbols 16

Operating sequence 17-19

Washing programmes 20-21

Maintenance 22

Body Work 22

Door seal 22

Detergent dispenser drawer 22

Drain pump 22

Water inlet filter 23

Emergency emptying out 23

Frost precautions 23

Something not working? 24-25

Warnings 3

Disposal 4

Tips for environmental protection 4

Technical specifications 4

Installation 5

Unpacking 5

Positioning 5

Water inlet 5

Water drainage 6

Electrical connection 6

Your new washing machine 7

Description of the appliance 7

Detergent dispenser drawer 7

Use 8

Control panel 8

Controls 8-13

Programme information 13

Contents

Transport damages

When unpacking the appliance, check that it is not

damaged. If in doubt, do not use it and contact the

Service Centre.

ENGLISH

3

Installation

• All internal packing must be removed before using

the appliance. Serious damage may be caused to

the machine or adjacent furniture if the protective

transit devices are not removed or are not

completely removed. Refer to the relevant

paragraph in the instruction book.

• Any electrical work required to install this

appliance must be carried out by a qualified

electrician.

• Any plumbing work required to install this

appliance must be carried out by a qualified

plumber.

• After having installed the machine, check that it is

not standing on its electrical supply cable.

• If the appliance is placed on a carpeted floor,

ensure that air can circulate freely between the

feet and the floor.

Use

• This appliance is designed for domestic use. It

must not be used for purposes other than those

for which it was designed.

• Only wash fabrics which are designed to be

machine washed. Follow the instructions on each

garment label.

• Do not overload the appliance. Follow the

instructions in the instruction book.

• Make sure that all pockets are empty. Objects

such as coins, safety pins, pins and screws can

cause extensive damage.

• Do not machine wash garments saturated with

petroleum, methylated spirits, trichlorethylene, etc.

If such fluids have been used to remove stains

prior to washing, wait until they have completely

evaporated from the fabric before placing

garments in the appliance.

• Place small items such as socks, belts, etc. in a

cloth bag or pillowcase to prevent them getting

trapped between the drum and the tub.

Warnings

• Use only the recommended quantities of fabric

softener. An excessive amount could damage the

laundry.

• Leave the porthole door slightly ajar when the

appliance is not in use. This preserves the door

seal and prevents the formation of musty smells.

• Always check that water has emptied out before

opening the door. If not, drain the water following

the instructions in the instruction book.

• Always unplug the appliance and shut the water

tap after use.

General safety

• Repairs to the machine must be carried out only by

qualified personnel. Repairs carried out by

inexperienced persons could cause serious

danger. Contact your local Service Centre.

• Never pull the power supply cable to remove the

plug from the socket; always take hold of the plug

itself.

• During high temperature wash programmes the

door glass may get hot. Do not touch it!

Child safety

• Children are often not aware of how dangerous

electrical appliances can be. When the machine is

working, children should be carefully supervised

and not be allowed to play with the appliance.

• The packaging components (e.g. plastic film,

polystyrene) can be dangerous to children - danger

of suffocation! Keep them out of children’s reach.

• Keep all detergents in a safe place out of children’s

reach.

• When the appliance is to be scrapped, cut off the

electrical supply cable and destroy the plug with

the remaining cable. Disable the door catch in

order to prevent children from becoming trapped

inside while playing.

The following warnings are provided in the interests of overall safety. You must read them carefully

before installing or using the appliance.

UserManual 1495 UK2272005.qxd 30/08/05 15.20 Page 3

4

Disposal

Tips for environmental protection

Packaging materials

The materials marked with the symbol are

recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

This means that they can be recycled by disposing of

them properly in appropriate collection containers.

Machine

Use authorised disposal sites for your old appliance.

Help to keep your country tidy!

To save water, energy and to help protect the

environment, we recommend that you follow these

tips:

• Normally soiled laundry may be washed without

prewashing in order to save detergent, water and

time (the environment is protected too!).

• The machine works more economically if it is fully

loaded.

• With adequate pre-treatment, stains and limited

soiling can be removed; the laundry can then be

washed at a lower temperature.

• Measure out detergent according to the water

hardness, the degree of soiling and the quantity of

laundry being washed.

DIMENSIONS Height 85 cm

Width 60 cm

Depth 60 cm

MAXIMUM LOAD Cotton 8.0 kg

Synthetics 4.0 kg

Delicates 3.0 kg

Woollens 2.0 kg

Hand wash 2.0 kg

Silk 1.0 kg

SPIN SPEED 1400 rpm max.

POWER SUPPLY VOLTAGE/FREQUENCY 220-240 V/50 Hz

TOTAL POWER ABSORBED 2200 W

MINIMUM FUSE PROTECTION 10 A

WATER PRESSURE Minimum 500 kPa

Maximum 800 kPa

This appliance complies with the following EEC Directives:

73/23/EEC of 19/02/73 relating to low voltage

89/336/EEC of 03/05/89 relating to electromagnetic compatibility.

Technical specifications

ENGLISH

5

Unpacking

All transit bolts and packing must be

removed before using the appliance.

You are advised to keep all transit devices so that they

can be refitted if the machine ever has to be transported

again.

1. Using a spanner, unscrew and remove the two

rear bottom screws. Slide out the two plastic pins.

Lay the machine on its back, taking care not to

squash the hoses. This can be avoided by placing

one of the corner packing pieces between the

machine and the floor

2. Remove the polystyrene block(s) from the bottom

of the machine and release the two plastic bags.

3. Very carefully slide out the left polythene bag,

removing it towards the right and then

downwards.

4. Very carefully slide out the right polythene bag,

removing it towards

the left and then upwards.

Remove the bottom cover placed into the drum of

your appliance, lay it’s hook as the arrow ’A’

indicates and push the top of the cover to seal it

closed

Important: You can find more detailed instructions

regarding the bottom cover assembling in it’s relative

bag.

5. Set the machine upright and remove the

remaining rear screw. Slide out the relevant pin.

6. Plug all the holes with the plugs which you will

find in the envelope containing the instruction

manual.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine

is not impeded by carpets, rugs etc. Check that

the machine does not touch the wall or cupboard

units. Carefully level by screwing the adjustable

feet in or out. Never place cardboard, wood or

similar materials under the machine to

compensate for any unevenness in the floor.

Water inlet

Connect the water inlet hose to a tap with 3/4” BSP

thread.

Use the hose supplied with the washing machine.

DO NOT USE OLD HOSES.

The other end of the inlet hose which connects to the

machine can be turned in any direction. Simply

loosen the fitting, rotate the hose and retighten the

fitting, making sure there are no water leaks.

P1051

Installation

P1128

P0002

P1088

P1129

P0001

P1123

2

3

1

P1126

P1127

P0021

UserManual 1495 UK2272005.qxd 30/08/05 15.20 Page 5

6

The inlet hose must not be lengthened. If it is too

short and you do not wish to move the tap, you will

have to purchase a new, longer hose specially

designed for this type of use.

Water drainage

The end of the drain hose can be positioned in three

ways:

Hooked over the edge of a sink using the plastic

hose guide supplied with the machine. In this

case, make sure the end cannot come unhooked

when the machine is emptying.

This could be done by tying it to the tap with a piece

of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be

above the trap so that the bend is at least 60 cm

above the ground.

Directly into a drain pipe at a height of not less

than 60 cm and not more than 90 cm.

The end of the drain hose must always be

ventilated, i.e. the inside diameter of the drain pipe

must be larger than the outside diameter of the drain

hose.

The drain hose must not be kinked. Run it along the

floor; only the part near the drainage point must be

raised.

For the correct functioning of the machine the

drain hose must remain hooked on the proper

support piece situated on the top part of back

side of the appliance

P0023

P0022

Electrical connection

This machine is designed to operate on a 220-240 V,

single-phase, 50 Hz supply.

Check that your domestic electrical installation can

take the maximum load required (2.2 kW), also

taking into account any other appliances in use.

Connect the machine to an earthed socket.

The manufacturer declines any responsibility

for damage or injury through failure to comply

with the above safety precaution.

Should the appliance power supply cable

need to be replaced, this must be carried out

by our Service Centre.

Important!

When the appliance is installed the power supply

cable must be easily accessible.

ENGLISH

7

1. Detergent dispenser drawer

2. Control panel

3. Door handle

4. Drain pump

5. Adjustable feet

Detergent dispenser drawer

Pre-wash

Main wash

Fabric softener, starch

Your new washing machine

Description of the appliance

This new machine, which is fitted with the New Jet System, meets all modern requirements for effective

treatment of laundry with low water, energy and detergent consumption.

• The special handwash programme with its new delicate wash system treats your delicate items with

extreme care.

• The special wool programme with its new delicate wash system treats your woollens with extreme care.

• The automatic cooling of the washing water from 95° to 60°C before draining will prevent old drain pipes

from being deformed.

• The balance control device ensures the machine is stable during the spin.

P1206

UserManual 1495 UK2272005.qxd 30/08/05 15.20 Page 7

8

Use

Control panel

1. Detergent Dispenser Drawer

2. Programme selector dial

The programme selector dial is divided into 4

sections:

1. Cotton (Green section)

2. Synthetic, delicate, handwash, wool, silk and

blankets (Blue section)

3. Rinse, drain, spin and delicate spin (grey section)

4. Memory 1, Memory 2 (Grey section)

The selector dial can be turned either clockwise or

anti-clockwise. Position “cotton Eco” corresponds to

an energy saving programme for cotton and to “OFF”

to reset programme or switching OFF the machine.

At the end of programme, the selector dial must be

turned to position “OFF” to switch the machine OFF.

Attention !

If you turn the programme selector dial to another

programme when the machine is working, a warning

message appears for 4 secconds on the display

while the buzzer sounds 3 times.

3. Display

The display is used for setting a large number of

functions and to combine them with each other using

only a few control elements (1 programme selector

dial and 6 buttons)

2134567

Quick 60

Cotton

Cotton Eco

EWF 1495

Change

Options

Exit

SpinTemp.

Start/

Add Clothes

Off

Delicate Spin

Memory 1

Drain

Rinse

Spin

Memory 2

Synthetic

Wool

Silk

Delicate

Hand Wash

Blankets

Quick 60

Cotton

Cotton Eco

Off

Delicate Spin

Memory 1

Drain

Rinse

Spin

Memory 2

Synthetic

Wool

Silk

Delicate

Hand Wash

Blankets

This simple control method is made easy, thanks to

the interactive display. Interactive means that the

washing machine display changes to reflect each

step you have entered. This ensures that only those

settings that make sense are made. You are able to

see the current settings at any time in the information

panel and in the option row.

1. Information panel shows the current settings

2. Real time clock

3. End cycle time

4. Selection shows temperature, spin speed,

options and extras.

4 Temperature button "Temp".

Press this button repeatedly to increase or decrease

the temperature, if you want your laundry to be

washed at a temperature different from the one

proposed by the washing machine.

Maximum temperatures are 95°C for cotton, 60°C for

synthetic fabrics, 40°C for delicates, wool, blankets

and fabrics to be hand-washed, and 30°C for silk ,

while «O» corresponds to cold wash.

By pressing Temperature “Temp.” button, the

relevant message will appear on the second row of

Change

Options

Exit

Cotton

Cycle and at

08.30

10.55

95°C 1400

1 23

4

Temp. Spin

9

the display (instead of «cycle end at»). In the corner

of the third row appears the indication of the selected

temperature.

5 Spin Speed button "Spin".

Press this button repeatedly to change the spin

speed, if you want your laundry to be spun at a

speed different from the one proposed by the

washing machine.

Maximum speeds are:

• for cotton: 1400 rpm

• for wool, and fabrics to be handwashed:

900 rpm;

• for delicate, silk fabrics, blankets:

0700 rpm;

By depressing the Spin speed button you can also

choose No Spin option «

0

», Rinse Hold option

and Night cycle option .

No spin «

0

» option eliminates all the spin phases

and increases the rinses number for cottons and

synthetics.

Rinse hold option : when you choose this option,

the machine will not drain the water of the last rinse,

so as not to wrinkle the laundry.

Night cycle option : when you choose this

option, the machine will not drain the water of the

last rinse, so as not to wrinkle the laundry.

As all spinning phases are suppressed, this washing

cycle is very quiet and it can be selected at night or

in times with a more economical power rate.

On cotton and synthetic programmes the rinses will

be performed with more water.

To complete the cycle, choose one of the following

programmes:

Drain

To drain the water select Drain programme by means of

the selector dial, then press the Start/Add clothes button.

Spin

To spin the laundry choose spin or delicate spin

programme by means of the selector dial; select spin

speed by means of button "Spin" and then press the

Start/Add clothes button.

Important!

Before choosing the programme Drain, Spin or Delicate

Spin the selector dial has to be positioned to “Off ”.

6 «Options», «Change» and «Exit»

buttons

Options button allows you to move through the option

icons.

Change button allows you to select/change the status of

the different icons.

Exit button allows you to return to the previous selection.

-

!"#$

$

!"#$

10

Depending on the program, different functions can be

combined. These must be selected after choosing the

desired program and before pressing the Start/Add

clothes button.

By pressing the "Options" button, all the symbol icons,

allowed for the selected programme will appear in the

display .

The first option will start flashing. Its name and

status will appear in the display.

If you want to change the option status, press

"Change" button. There will appear a line below the

selected icon, indicating that the option is set.

To select the other options press again the «Options»

button and proceed as before.

Once you have completed the selection of the options,

pressing the «Exit» button, the selected icons will

remain fixed in the display.

Note: To modify the already chosen option selections,

repeat the previous procedure.

Important! While selecting the option, if you press the

temperature “Temp.”, “Spin” , or Start/Add clothes

button, the relative function will be executed.

EXTRA RINSE: this option can be selected with

all programmes, except the wool, handwash programs

and blankets.The machine will add 2 rinses for cottons

and 1 rinse for synthetics, delicates and silk.

This option is recommended for people who are

allergic to detergents, and in areas where the water is

very soft.

TIME SAVING: this option can be used for lightly

soiled cotton, synthetic or delicates items in order to

obtain a good washing program in a short time. The

washing time will be reduced according to the type of

fabric and the selected temperature. Selecting this

option «Short» or «Very Short» will be shown in the

display.

DELAY START: this option makes it possible to

delay the starting of the washing program by 30 min -

60 min - 90 min, 2 hours and then by 1 hour till 20

hours. The delay you have selected is indicated in the

display.

You must select this option after you have set the

program and before you press the Start/Add clothes

button.

You can cancel the delay time at any moment, before

you press the Start/Add Clothes button. If you have

Change

Options

Exit

Delay Start

Start in 30 min 11.25

Temp. Spin

Change

Options

Exit

Delay Start

No 10.55

Temp. Spin

you press the Start/Add clothes button. If you have

already pressed the Start/Add clothes button and you

wish to cancel the Delay time proceed as follows:

1. set the washing machine to PAUSE by pressing

the Start/Add clothes button;

2. deselect the Delay start option, changing the

status;

3. press the Start/Add clothes button to start the

program.

Important!

The selected delay can be changed only after

selecting the washing program again.

The door will be locked throughout the delay time.

If you need to open the door, you must first set the

washing machine to PAUSE by pressing the

Start/Add clothes button. After you have closed the

door, press the Start/Add clothes button again.

The Delay Start cannot be selected with

SPIN/DELICATE SPIN and DRAIN programmes.

PREWASH: select this option if you wish your

laundry to be prewashed before the main wash (not

available for wool and handwash cycle, quick 60 and

silk programmes).

The Prewash ends with a short spin at 650 rpm in

programmes for cotton and synthetic fabrics, whereas

in the program for delicate fabrics the water is only

drained.

INTENSIVE: for heavily soiled laundry.

This option can be selected only for cottons and

synthetics.

The washing time will be prolonged according to the

cycle temperature and the fabric type.

EASY IRON: selecting this button the laundry is

gently washed and spun to avoid any creasing. In

this way ironing is easier. Furthermore the machine

will perform 6 rinses instead of 3 for cotton and 4

rinses instead of 3 for synthetics. This function can

be used for cotton and synthetic fabrics. If this option

is selected for cotton programmes, the spin speed

automatically will reduce to 1000 rpm.

ENERGY SAVING: this option can be selected

only for synthetics lightly or normally soiled with a

temperature of 40°C or higher. The washing time will

be prolonged. If you select 60°C-50°C-40°C, the

washing temperature will be reduced to 42°C.

MENU:

Menu option is used for selecting various basic

settings without affecting the particular wash

programme. These basic settings will remain active

until they are deselected/modified.

To move through the different Menu settings use the

«Options» button.

To change/confirm the selected setting use the

«Change» button.

ENGLISH

11

MEMORY

Programme settings that are frequently used can be

saved (e.g. cotton, 95°C, 1200 rpm, with time saving).

There are 2 memory spaces available for this

purpose. The saved programme can be selected in

the same way as any other wash programme by

means of the selector dial.

Example: Cotton , 95°C, 1200 rpm, with Time saving.

1. Select the cycle and programme settings.

2. Enter the Menu option and select one of the

memory positions. A «Store programme?»

message will appear in the display.

3. To memorise the selected programme press the

«Change» button. «Stored» message will appear

in the display.

To change the memorized programme setting repeat

the procedure from the beginning.

SOUND

The sound setting permits you to modify the volume of

the sound emitter. You can choose between different

levels: low, no sound and normal.

Change

Options

Exit

Programme Stored

Temp. Spin

Change

Options

Exit

Memory 1

Store programme?

B

Temp. Spin

Change

Options

Exit

Setup

A

Temp. Spin

Change

Options

Exit

Cotton

Cycle end at

08.30

10.55

60°C 1400

Temp. Spin

Example:

1. Enter the Menu option and select the sound

setting.

2. Use the «Change» button to select the desired

level.

RINSE +

The washing machine is set such that its water

consumption is extremely economical. For people with

allergies and in areas where the water is very soft, it

can however be helpful to use more water when

rinsing. When you select RINSE +, 2 additional rinses

will be carried out for cottons and 1 additional rinse for

synthetics, delicates and silk items. If RINSE + has

been selected, will appear in the option row.

Change

Options

Exit

Extra Rinse

Yes 10.55

Temp. Spin

Change

Options

Exit

Extra Rinse

No 10.55

Temp. Spin

Change

Options

Exit

Sound

Low or No Sound

Temp. Spin

Change

Options

Exit

Sound

Normal

Temp. Spin

UserManual 1495 UK2272005.qxd 30/08/05 15.20 Page 11

12

LANGUAGE

You can change the language setting if you would like

the indicators in the display to appear in a different

language.

Example:

1. Enter the Menu option and select the Language

setting.

2. Press the «Change» button to select the desired

Language.

CLOCK

The clock setting option permits you to set the

current time in the memory. It is important to set it

correctly as the display indicates the cycle end time

when you select a programme (refer item 3).

To set the current time of day:

1.Turn the power ON and select any Programme.

(E.g. Cotton)

2.Press the <<OPTIONS>> button repeatedly until

“Setup” appears in the display.

3.Press the <<CHANGE>> button to select the

“Setup” function.

4.Press the <<OPTIONS>> button repeatedly until

“Clock: Set Time” appears in the display.

5.Set the time by pressing the <<CHANGE>> button.

A short press will advance the time by 1 minute.Hold

the << CHANGE>> button down and the time will

advance in 10 minute increments.

6.Press the << EXIT>> button.

Change

Options

Exit

Clock

Set Time

14.46

B

Temp. Spin

Change

Options

Exit

Clock

Set Time

14.45

A

Temp. Spin

Change

Options

Exit

Language

ENGLISH

Temp. Spin

Change

Options

Exit

Sprache

DEUTCH

A

Temp. Spin

CONTRAST

The Contrast setting allows you to modify the optical

characteristic of the display.

Example:

1. Enter the Menu option and select the Contrast

setting.

2. Use the «Change» button to set up the desired

contrast level.

BRIGHTNESS

The Brightness setting allows you to modify the

backlight intensity of the display.

Example:

1. Enter the Menu option and select the Brightness

setting.

2. Use the "Change"button to set up the desired

brightness level.

Note:

At the end of the programme if no button is pressed

for approximately 10 minutes the backlight intensity

goes off.

Change

Options

Exit

Brightness

B

Temp. Spin

Change

Options

Exit

Brightness

A

Temp. Spin

Change

Options

Exit

Contrast

B

Temp. Spin

Change

Options

Exit

Contrast

A

Temp. Spin

Change

Options

Exit

Einstellungen

B

Temp. Spin

13

7. Start/Add Clothes button

This button has 2 functions:

Start: after you have selected the desired

programme and options, press this button to start

the washing machine. The light close to the button

will stop flashing and remain lit.

If you have selected a delay time option, the

countdown will begin and will be shown on the

display.

Add Clothes: When you press this button again, the

programme in progress is interupted . The light close

to the button will start flashing. To restart the

programme, press the button again.When you press

“Start/Add clothes”button, it becomes possible to

open the door only if:

The washing machine is not in the heating phase;

The level of the water is not high;

The drum is not turning.

Important! You must pause the washing machine

before you make any change in the programme in

progress, by pressing “Start/Add clothes” button.

14

Washing hints

Sorting the laundry

Follow the wash code symbols on each garment

label and the manufacturer’s washing instructions.

Sort the laundry as follows:

whites, coloureds, synthetics, delicates, woollens.

Temperatures

90°- 95° for normally soiled white cottons and linen

(e.g. tea cloths, towels, tablecloths,

sheets...)

50°- 60° for normally soiled, colour fast garments

(e.g. shirts, night dresses, pyjamas....) in

linen, cotton or synthetic fibres and for

lightly soiled white cotton (e.g. underwear).

O

(cold) for delicate items (e.g. net curtains), mixed

30°- 40° laundry including synthetic fibres and

woollens bearing the label «pure new

wool, machine washable, non-shrink».

Before loading the laundry

Never wash whites and coloureds together. Whites

may lose their “whiteness” in the wash.

New coloured items may run in the first wash; they

should therefore be washed separately the first time.

Make sure that no metal objects are left in the

laundry (e.g. hair clips, safety pins, pins).

Button up pillowcases, close zip fasteners, hooks

and poppers. Tie any belts or long tapes.

Remove persistent stains before washing. Rub

particularly soiled areas with a special detergent or

detergent paste.

Treat curtains with special care. Remove hooks or tie

them up in a bag or net.

Maximum loads

Recommended loads are indicated in the

programme charts.

General rules:

Cotton, linen: drum full but not too tightly packed;

Synthetics: drum no more than half full;

Delicate fabrics and woollens: drum no more than

one third full.

Washing a maximum load makes the most efficient

use of water and energy.

For heavily soiled laundry, reduce the load size.

Laundry weights

The following weights are indicative:

bathrobe 1200 g

napkin 100 g

quilt cover 700 g

sheet 500 g

pillow case 200 g

tablecloth 250 g

towels 200 g

tea cloth 100 g

night dress 200 g

ladies’ briefs 100 g

man’s work shirt 600 g

man’s shirt 200 g

man’s pyjamas 500 g

blouse 100 g

men’s underpants 100 g

Removing stains

Stubborn stains may not be removed by just water

and detergent. It is therefore advisable to treat them

prior to washing.

Blood: treat fresh stains with cold water. For dried

stains, soak overnight in water with a special

detergent then rub in the soap and water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth and dab the

stain; treat several times.

Dried grease stains: moisten with turpentine, lay

the garment on a soft surface and dab the stain with

the fingertips and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust

removing product used cold. Be careful with rust

stains which are not recent since the cellulose

structure will already have been damaged and the

fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites

and fast coloureds only).

Grass: soap lightly and treat with bleach (whites and

fast coloureds only).

Ball point pen and glue: moisten with acetone (*),

lay the garment on a soft cloth and dab the stain.

Lipstick: moisten with acetone as above, then treat

stains with methylated spirits. Remove any residual

marks from white fabrics with bleach.

Red wine: soak in water and detergent, rinse and

treat with acetic or citric acid, then rinse. Treat any

residual marks with bleach.

15

Ink: depending on the type of ink, moisten the fabric

first with acetone (*), then with acetic acid; treat any

residual marks on white fabrics with bleach and then

rinse thoroughly.

Tar stains: first treat with stain remover, methylated

spirits or benzene, then rub with detergent paste.

(*) do not use acetone on artificial silk.

Detergents and additives

Good washing results also depend on the choice of

detergent and use of the correct quantities to avoid

waste and protect the environment. Although

biodegradable, detergents contain substances

which, in large quantities, can upset the delicate

balance of nature.

The choice of detergent will depend on the type of

fabric (delicates, woollens, cottons, etc.), the colour,

washing temperature and degree of soiling.

Only low suds frontload washing detergent should

be used in this appliance:

– powder detergents for all types of fabric,

– powder detergents for delicate fabrics (60°C max)

and woollens,

– liquid detergents, preferably for low temperature

wash programmes (60°C max) for all types of

fabric, or special for woollens only.

The detergent and any additives must be placed in

the appropriate compartments of the dispenser

drawer before starting the wash programme.

If using concentrated powder or liquid detergents, a

programme without prewash must be selected.

The washing machine incorporates a recirculation

system which allows an optimal use of the

concentrated detergent.

Pour liquid detergent into the dispenser drawer

compartment marked just before starting the

programme.

Any fabric softener or starching additives must be

poured into the compartment marked before

starting the wash programme.

Follow the product manufacturer’s recommendations

on quantities to use and do not exceed the «MAX»

mark in the detergent dispenser drawer.

Quantity of detergent to be used

The type and quantity of detergent will depend on

the type of fabric, load size, degree of soiling and

hardness of the water used.

Water hardness is classified in so-called “degrees” of

hardness. Information on hardness of the water in

your area can be obtained from the relevant water

supply company, or from your local authority.

Follow the product manufacturers’ instructions on

quantities to use.

Use less detergent if:

– you are washing a small load,

– the laundry is lightly soiled,

– large amounts of foam form during washing.

16

International wash code symbols

These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.

Energetic wash

Delicate wash

Max. wash

temperature

95°C

Max. wash

temperature

60°C

Max. wash

temperature

40°C

Max. wash

temperature

30°C

Hand wash Do not

wash

at all

Bleaching Bleach in cold water Do not bleach

Ironing Hot iron

max 200°C

Warm iron

max 150°C

Lukewarm iron

max 110°C

Do not iron

Dry cleaning Dry cleaning

in all solvents

Dry cleaning in

perchlorethylene,

petrol, pure alcohol,

R 111 & R 113

Dry cleaning

in petrol,

pure alcohol

and R 113

Do not

dry clean

Drying Flat On the line On clothes

hanger

Tumble dry

high

temperature

low

temperature

Do not

tumble dry

95 60 40

30

60

40 40

30

ENGLISH

17

Operating sequence

Before the first wash we recommend that you pour 2

litres of water into the main wash compartment

of the detergent drawer. Then run a cotton cycle at

60°C, with the machine empty, in order to remove

any manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment .

If you wish to carry out the prewash or soak phase,

pour detergent into the appropriate compartment

marked .

3. Measure out the additive

If required, pour fabric softener into the compartment

marked , without exceeding the «MAX» mark.

C0117

C0116

P0004

4. Switch the machine ON

Turn the selector dial to the desired programme to

switch the appliance on.

To switch the appliance off turn it to «Off».

Switching the appliance for the first time.

LANGUAGE

When switching on the appliance for the first time

you must set the language in which you want the

indicators in the display to appear.

Important!

If the display is not showing any language, the

appliance has already been switched on once. In

such case, go to the chapter «Change language» if

you would like to change the language setting.

Please refer page 12.

UserManual 1495 UK2272005.qxd 30/08/05 15.20 Page 17

18

SETTING THE TIME

You should set the time prior to the first wash and

when changing to and from daylight savings time.

See «Clock setting», Menu on page 12.

5. Select the desired

programme/fabric

Turn the selector dial, in order to select the desired

programme/fabric. The relevant message will appear

in the display.

The display will show the END CYCLE TIME of the

selected programme, calculated on the basis of the

maximum load for each type of fabric. The Start/Add

clothes button light will start flashing.

If the load of laundry to be washed is small, at the

beginning of the cycle the display will still indicate the

END CYCLE relevant to the maximum load. The

duration value will be gradually adjusted during the

execution of the cycle.

6. Select the temperature

Press the TEMPERATURE button if you wish to

select a temperature value different from the one

proposed by the washing machine.

The message of the maximum available temperature

appears on the second row of the display (instead of

«cycle end at»). In the corner of the third row

appears the indication of the selected temperature.

Change

Options

Exit

COTTON

MAX 95°C

08.30

10.55

40°C 1400

Temp. Spin

Change

Options

Exit

Cotton

Cycle and at

08.30

10.55

60°C 1400

Temp. Spin

Quick 60

Cotton

Cotton Eco

Off

Delicate Spin

Memory 1

Drain

Rinse

Spin

Memory 2

Synthetic

Wool

Silk

Delicate

Hand Wash

Blankets

7. Select the Spin Speed "Spin",the

Rinse Hold or Night cycle .

Press the SPIN SPEED button repeatedly, in

order to select the desired spin speed or No Spin

«

O

» or the Rinse Hold or the Night Cycle

options. The relevant message will appear on the

second row of the display. The selected spin level

will be shown on the third row next to the spin button.

If you select the Rinse Hold or Night Cycle options,

the machine will stop at the end of the programme

with the water still in the tub.

8. Select the desired options

Depress the relevant buttons to select the required

options.

Depending on the selected programme only

certain options are available and shown during

the selection phase.

Note: Not all the options are compatible between

themselves. The uncompatible option icons will

disappear.

9. Select the DELAY TIME

Before you start the programme, if you wish the

starting to be delayed, choose the DELAY option.

The selected delay time value (up to 20 hours) will

appear on the display while selecting.

The end cycle will be updated and shown on the

relative position of the display.

Change

Options

Exit

Delay Start

Start in 30 min 11.25

Temp. Spin

Change

Options

Exit

Delay Start

No 10.55

Temp. Spin

Change

Options

Exit

COTTON

MAX 1400

08.30

10.55

1200

40°C

Temp. Spin

19

10. Start the programme

Press the Start/Add clothes button. The light will stop

flashing. The message relevant to the phase that is

in progress will be shown in the display.

If you have chosen a delayed start, the washing

machine will begin the countdown.

11. How to change a programme

during its cycle

Before you make any change, you must pause the

washing machine by pressing the Start/Add clothes

button.

It is possible to change any phase before the

programme carries it out.

When the programme has started, you can only

reset it by turning the programme selector dial to

«Off» and then you can select the new programme.

The washing water remains in the tub.Start the new

programme by depressing the Start/Add clothes

button.

Note: To drain the water before starting the new

cycle you have to cancel the programme and select

the DRAIN cycle.

12. Cancelling a programme

Turn the selector dial to «Off» to cancel a

programme which is running. Now you can select a

new programme.

13.How to open the door during

the cycle of a programme

You can open the door, after having set the washing

machine to PAUSE, by pressing Start/Add clothes

button provided the following conditions exist:

1) the washing machine is not in the heating phase

beyond 55°C

2) the level of the water is not high;

3) the drum is not turning.

5$2#) '

'

If these requirements are met, when you pause the

washing machine, the relevant message appears in

the display, the door locked light goes out and the

door can be opened.

Should it not be possible to open the door and the

door locked light is on, should it be absolutely

necessary to do so, switch the machine off by turning

the selector dial on "Off" position.

After approximately 3 minutes, you can open the

door.

Pay attention to the level and temperature of the

water in the washing machine!

14. End of programme

At the end of the programme, the washing machine

stops automatically, gives an audible signal (if option

no sound has not been selected), and displays the

relevant message.

If you had selected the RINSE HOLD or NIGHT

CYCLE option, the Start/Add clothes button light is

off and the door locked light is on.

To drain or spin first turn the programme selector dial

to «Off» and then to drain programme or

spin/delicate spin programme.

Release of the lock is also indicated by the coming

on of the message "Door openable" (cycle ended)

and the going out of the door locked light.

Turn the programme selector dial to «Off» to switch

the machine off.

Remove the laundry from the washing machine.

Check whether the drum is completely empty, by

rotating it with your hand. The purpose of this is to

prevent any items of laundry from remaining

accidentally in the drum, where they might get

damaged in a subsequent wash (e.g. by shrinking) or

bleed colour into another load of laundry.

We advise you to close the water supply tap and

disconnect the plug from the socket.

Leave the door ajar in order to air the washing

machine.

20

Wash programmes

Fabrics

Type of Laundry

Description of

Programme

Availble options

Max. Load

*This programme at 60°c is the reference program for the energy label according to EEC directive 92/75

Programme table

Washing Programmes

Cotton

Quick 60

Cotton Eco*

Synthetics

Delicate

Handwash

Wool

Silk

Blankets

White and coloured

cotton e.g Sheets,

tablecloths,

household linen

White and coloured

cotton

A mixed load of

normally soiled

cottons.

Synthetic fabrics:

e.g.shirts,blouses,

Delicates like pillow

covers and curtains

Special programmes

for hand washing

fabrics

Clothes labelled

machine washable

wool or pure new

wool.

Silk

Blankets

Main wash at

O(cold)-95°C

3 rinses

Long spin

Main wash at

O(cold)-95°C

3 rinses

Long spin

Main wash at

40°C-60°C

3 rinses

Long spin

Main wash at

O(cold)-60°C

3 rinses

Short spin

Main wash at

O(cold)-40°C

3 rinses

Short spin

Main wash at

O(cold)-40°C

3 rinses

Short spin

Main wash at

O(cold)-40°C

3 rinses

Short spin

Main wash at

30°C

3 rinses

Short spin

Main wash at

30°C-40°C

3 rinses

Short spin

8kg

4.5kg

8kg

3.5kg

2kg

1kg

4.5kg

La pagina si sta caricando...

Electrolux EWF1495 Manuale utente

Electrolux EWF1495 Manuale utente

in altre lingue

Documenti correlati

Altri documenti