LG Bottom freezer refrigerator Manuale utente

Marca: LG

Modello: Bottom freezer refrigerator

Categoria: Frigo-congelatori

Tipo: Manuale utente

Questo manuale è adatto anche per

GR-L218USJV

P/No. MFL37933524

BOTTOM FREEZER

REFRIGERATOR

User’s Guide

Please read this guide thoroughly before operating and

keep it handy for reference at all times.

FRIGORIFERO CON

CONGELATORE

INFERIORE

Guida dell’utente

Leggere questa guida con attenzione prima dell'uso e

conservarla come riferimento.

æÀ°∂π√∫∞∆∞æÀ∫∆∏™

√‰ËÁ›Â˜ ÃÚ‹ÛË˜

¶·Ú·Î·ÏÔ‡ÌÂ ‰È·‚¿ÛÙÂ ‰ÈÂÍÔ‰ÈÎ¿ ÙÈ˜ Ô‰ËÁ›Â˜ ¯Ú‹ÛË˜

ÚÈÓ ÙË ÏÂÈÙÔ˘ÚÁ›· Î·È ÎÚ·Ù‹ÛÙÂ ÙÈ˜ ÛÂ ¤Ó·

ÚÔÛ‚¿ÛÈÌÔ Ì¤ÚÔ˜ ÁÈ· Ó· ·Ó·Ê¤ÚÂÛÙÂ ÛÂ ·˘Ù¤˜

ÔÔÈ·‰‹ÔÙÂ ÛÙÈÁÌ‹.

TABLE OF CONTENTS

English Version 2

Safety Instructions 3–10

Parts and Features 11

Refrigerator Installation 12–19

Unpacking Your Refrigerator 12

Installation 12

Base Cover 12

Removing and Replacing

Your Refrigerator Handles

and Doors 13–16

How to Remove and Reinstall

the Pullout Drawer 17–18

Leveling and Door Alignment 19

Using Your Refrigerator 20–32

Ensuring Proper Air Circulation 20

Multi-Flow 20

Setting the Controls 20

Adjusting the Temperatures

and Display 21

Operating the Dispenser 22

Setting the Functions 23

In-Door Ice Bin 24

Adjusting Control Settings 25

Food Storage Guide 25

Storing Frozen Food 26

❿❿

Refrigerator section

Refrigerator Shelves 27

Bottle Holder 27

Crisper Humidity Control 28

Removing Crisper 28

Glide‘N’Serve 28

Modular Door Bin 29

Dairy Bin 29

Utility Bin 29

Dispenser Drip Tray 29

❿❿

Freezer section

Ice Bin 30

DuraBase 30

DuraBase Divider 31

Pull out Drawer 31

Filter 32

Care and Cleaning 33–34

General Cleaning Tips 33

Outside 33

Inside Walls 33

Door Liner and Gaskets 33

Plastic Parts 33

Condenser Coils 33

Power Interruptions 34

When you go on vacation 34

When you move 34

About the Automatic Icemaker 35

Connecting the Water Line 36–38

Troubleshooting Guide 39–42

 This product is exclusive use at 230V/50Hz.



You should purchase transformer of more than 2.0KVA when you want to use it at the 110V area.

 You can't use it anywhere except 50Hz area.

This guide contains many important safety messages. Always read and obey all safety messages.

This is the safety alert symbol. It alerts you to safety messages that inform you

of hazards that can kill or hurt you or others, or cause damage to the product.

All safety messages will be preceded by the safety alert symbol and the hazard signal word

DANGER, WARNING, CAUTION. These words mean:

BASIC SAFETY PRECAUTIONS

SAFETY MESSAGES

You will be killed or seriously injured if you don’t follow instructions.

You can

be killed or seriously injured if you don’t follow instructions.

Indicates an imminently hazardous situation which, if not avoided,

may

result in minor or moderate injury, or product damage only.

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

WARNING

CAUTION

DANGER

Child entrapment and suffocation are not

problems of the past. Junked or abandoned

refrigerators are still dangerous…even if they will

sit for just a few days. If you are getting rid of

your old refrigerator, please follow the

instructions at right to help prevent accidents.

BEFORE YOU THROW

AWAY YOUR OLD

REFRIGERATOR OR

FREEZER

• Take off the doors.

• Leave the shelves in place so

that children may not easily

climb inside.

DANGER:

RISK OF CHILD ENTRAPMENT

CFC DISPOSAL

Your old refrigerator may have a cooling system

that used CFCs (chlorofluorocarbons). CFCs are

believed to harm stratospheric ozone.

If you are throwing away your old refrigerator,

make sure the CFC refrigerant is removed for

proper disposal by a qualified servicer. If you

intentionally release this CFC refrigerant, you can

be subject to fines and imprisonment under

provisions of environmental legislation.

GROUNDING REQUIREMENTS

IMPORTANT: Please read carefully.

TO CONNECT ELECTRICITY

RECOMMENDED GROUNDING

METHOD

The refrigerator should always be plugged into its

own individual properly grounded electrical outlet

rated for 230 Volts, 50 Hz, AC only, and fused at

15 or 20 amperes.

This provides the best performance and also

prevents overloading house wiring circuits which

could cause a fire hazard from overheated wires.

It is recommended that a separate circuit serving

only this appliance be provided.

Use a receptacle which cannot be turned off with

a switch or pull chain. Do not use an extension

cord.

Where a standard two-prong wall outlet is

encountered, it is your personal responsibility and

obligation to have it replaced with a properly

grounded three-prong wall outlet.

Do not, under any circumstances, cut or

remove the third (ground) prong from the

power cord.

NOTE: Before performing any type of installation,

cleaning,or removing a light bulb, turn the control

(Thermostat, Refrigerator Control or Freezer

Control, depending on the model)to OFF and

then disconnect the refrigerator from the electrical

source. When you are finished,reconnect the

refrigerator to the electrical source and reset the

control (Thermostat, Refrigerator Control or

Freezer Control, depending on the model) to the

desired setting.

• Repair or replace immediately all electric service

cords that have become frayed or otherwise

damaged. Do not use a cord that shows cracks or

abrasion damage along its length or at either the

plug or connector end.

• When moving your refrigerator away from the wall,

be careful not to roll over or damage the power

cord.

• Keep fingers out of pinch point areas; clearances

between the doors and cabinet are necessarily

small. Be careful closing doors when children are

in the area.

• This refrigerator must be properly installed in

accordance with the Attention Installer

Instructions that were taped to the front of the

refrigerator.

• Don’t touch the lamp, in case of light on the long

time, Because it can be very hot.

• DO NOT refreeze frozen foods which have thawed

completely. The United States Department of

Agriculture in Home and Garden Bulletin No. 69

says:

…You may safely refreeze frozen foods that have

thawed if they still contain ice crystals or if they

are still cold—below 4°C.

…Thawed ground meats, poultry or fish that have

any off-odor or off-color should not be refrozen

and should not be eaten. Thawed ice cream

should be discarded. If the odor or color of any

food is poor or questionable, get rid of it.

The food may be dangerous to eat.

Even partial thawing and refreezing reduces the

eating quality of foods, particularly fruits,

vegetables and prepared foods. The eating quality

of red meats is affected less than that of many

other foods. Use refrozen foods as soon as

possible to save as much of their quality as you

can.

WARNING

SAVE THESE INSTRUCTIONS

WARNING

Electrical Shock Hazard

FOR PERSONAL SAFETY, this appliance

must be properly grounded. Have the wall

outlet and the circuit checked by a qualified

electrician to make sure the outlet is properly

grounded.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

The dedicated outlet should be used.

• Using several devices at

one outlet may cause fire.

• The electric leakage

breaker may damage food

and the dispenser may be

leaked.

Do not allow the power plug to face upward

or to be squeezed at

the back of the

refrigerator.

Water may be flown into or

the plug may be damaged,

which causes fire or

electric shock.

1. When connecting the power

To reduce the risk of fire, electric shock, or injury to persons when using your product,

basic safety precautions should be followed, including the following.

Read all instructions before using this appliance.

Don’t use an extension cord

If possible, connect the refrigerator to its own

individual electrical outlet to prevent it and other

appliances or household lights from causing an

overload that could cause a power outage.

Accessibility of Supply Plug

The refrigerator-freezer should be so positioned

that the supply plug is accessible for quick

disconnection when accident happens.

Supply Cord Replacement

If the supply cord is damaged, it must be

replaced by the manufacturer or its service agent

or a similarly qualified person in order to avoid a

hazard.

FEED WATER PIPE INSTALLATION

Before installation

• Automatic ice maker can be installed only by

manufacturer.

• Automatic ice maker operation needs water

pressure of 147~834 kPa (1.5~8.5 kgf/cm

)

(That is, an instant paper cup (180 cc) will be

fully filled within 3 sec.).

• If water pressure does not reach the rating

147 kPa (1.5 kgf/cm

) or below, it is necessary

to purchase a separate pressure pump for

normal automatic icing and cool water feed.

• Keep the total length of the feed water pipe tube

within 8 m and be careful for the tube not be

bent. If the tube is 8 m or longer it may cause

trouble in water feed owing to the drain water

pressure.

• Install the feed water pipe tube at a place free

from heat.

WARNING

• Connect to potable water supply only.

• Refer to instructions with water filter kit for

installation.

WARNING

• The refrigerant and insulation blowing gas used

in the appliance require special disposal

procedures. When disposal, please consult with

service agent or a similarly qualified person.

WARNING

• Please do not use a dishwasher to clean the

lower drawers; the high temperature may cause

damage to the baskets which make them

unusable.

WARNING

1. When connecting the power

To reduce the risk of fire, electric shock, or injury to persons when using your product,

basic safety precautions should be followed, including the following.

Read all instructions before using this appliance.

Do not allow the power cord bent or pressed

by the heavy object to

be damaged.

It may damage the power

cord to cause fire or electric

shock.

Do not extend or modify the length of the

power plug.

It causes electric shock or fire

by the electric damage of the

power cord or others.

Unplug the power plug when cleaning,

handling or replacing the interior lamp of the

refrigerator.

• It may cause electric shock or injury.

• When replacing the interior

lamp of the refrigerator, make

sure that the rubber ring for

preventing the electric spark

within the socket is not taken

off.

Do not pull out the cord or touch the power

plug with wet hands.

• It may cause electric

shock or injury.

Remove water or dust from the power plug

and insert it with the ends of the pins

securely connected.

Dust, water or unstable

connection may fire or

electric shock.

Make sure of grounding.

The incorrect grounding

may cause breakdown

and electric shock.

When the power cord or the power plug is

damaged or the holes of

the outlet are loosed, do

not use them.

It may cause electric shock or

short circuit to make fire.

Grounding

Conductor

Copper

flat

More than

75cm

IMPORTANT SAFETY INSTRUCTIONS

Do not place the lit candle within the

refrigerator to deodorize.

It may cause explosion or fire.

Do not insert the hands into the ice bucket

or the ice dispenser.

Operating the ice maker may

cause injury.

Do not store the medicine or the academic

materials at the refrigerator.

When the material with the

strict temperature control is

stored, it may be

deteriorated or it may

make an unexpected

reaction to cause any risk.

Do not use the combustible spray near the

refrigerator.

It may cause fire.

The Academic

Medicine

The Medicine

Avoid the heating devices.

It may cause fire.

Do not place flower vase, cup, cosmetics,

medicine or any container

with water on the

refrigerator.

It may cause fire, electric shock

or injury by dropping down.

2. When using the refrigerator

Do not place the heavy object or the

dangerous object

(container with liquid) on

the refrigerator.

It may be dropped to cause injury,

fire or electric shock when

opening or closing the door.

Do not install the refrigerator in the wet

place or the place which

water or rain splashes.

Deterioration of insulation of

electric parts may cause

electric leakage.

Do not cling to the door or the shelves of the

door or the home bar of the freezer or the

cool chamber.

It may make the refrigerator

fallen down or damage the

hands. Especially, do not

allow the children to do the

above.

Do not use or store inflammable materials

ether, benzene, alcohol, medicine, LP gas,

spray or cosmetics

near or in the

refrigerator.

It may cause explosion

or fire.

Benzene

Ether

Thinner

IMPORTANT SAFETY INSTRUCTIONS

2. When using the refrigerator

When disposing the refrigerator, remove the

packing materials from

the door.

It may cause to lock out the

child.

Install the refrigerator on the solid and level

floor.

Installing it on the unstable

place may cause death by

falling down the

refrigerator when opening

or closing the door.

Do not insert the hands or the metal stick

into the exit of cool air, the cover, the bottom

of the refrigerator,

the heatproof grill

(exhaust hole) at the

backside.

It may cause electric

shock or injury.

When you want to dispose the refrigerator,

contact to the down-block office.

When you want to dispose

the large living waste such

as electric home appliance

and furniture, you’d better

contact the local down-

block office.

Down-block

office

Use the submerged refrigerator after

checking it.

It may cause electric

shock or fire.

When gas is leaked, do not touch the

refrigerator or the outlet and ventilate the room

immediately.

• The explosion by spark may cause fire or burn.

• Because this refrigerator uses natural gas (isobutene,

R600a) as the environment-friendly refrigerant, even a

small amount (50~60g) is combustible. When the gas is

leaked by the severe

damage during delivering,

installing or using the

refrigerator, any spark

may cause fire or burn.

Do not spray water at the outside or the

inside of the refrigerator or do not clean it

with benzene or thinner.

Deterioration of insulation of

electric parts may cause

electric shock or fire.

When any strange smell or smoke is

detected from the refrigerator, power plug

get rid of electric

outlet immediately

and contact to the

service center.

It may cause fire.

Thinner

Service

center

Do not allow any person except the qualified

engineer to disassemble, repair or alter the

refrigerator.

It may cause injury,

electric shock or fire.

Do not use the refrigerator for non-domestic

purpose (storing medicine or testing

material, using at the ship, etc.).

It may cause an unexpected

risk such as fire, electric

shock, deterioration of

stored material or chemical

reaction.

CAUTION

Violating this direction may cause injury or damage house or furniture. Always be careful, please.

Wait for 5 minutes or

longer when

reconnecting the plug.

It may cause the operation of

the freezer to fail.

Supply the automatic ice maker with

drinkable water only

(only for the model

with the dispenser).

Otherwise, it may cause

any risk.

After

5minutes

Drinkable

water

Do not touch food or containers at the

freezer with wet hands.

It may cause frostbite.

Do not put ice in thin crystal cup or

ceramic ware.

It may break cup or ceramic

ware to cause injury.

Pull out the power plug not by grasping

the cord but the plug

of its end.

It may cause electric shock

or short circuit to fire.

Do not put bottle in the freezer.

It may freeze the

contents to break the

bottle to cause injury.

Do not insert the hands into the bottom

of the refrigerator.

The iron plate of the

bottom may cause injury.

Do not install the refrigerator in the wet

place or the place

which water or rain

splashes.

Deterioration of insulation of

electric parts may cause

electric leakage.

Because opening or closing the door of

the refrigerator may cause injury to the

person around it, be careful, please.

Opening or closing the

door may cause feet or

hands to be caught in

the chink in door or the

child to be get hurt by

the corner.

Carry the refrigerator with the handle bar

at the bottom of the front and the top of

the rear.

Otherwise, your hands

may be slipped to

cause injury.

Do not put any living

animal in the

refrigerator.

IMPORTANT SAFETY INSTRUCTIONS

This appliance contains a small amount of isobutane refrigerant (R600a),

natural gas with high environmental compatibility, but it is also combustible.

When transporting and installing the appliance, care should be taken to

ensure that no parts of the refrigerating circuit are damaged. Refrigerant

squirting out of the pipes could ignite or cause an eye injury. If a leak is

detected, avoid any naked flames or potential sources of ignition and air the

room in which the appliance is standing for several minutes.

In order to avoid the creation of a flammable gas air mixture if a leak in the

refrigerating circuit occurs, the size of the room in which the appliance may

be sited depends on the amount of refrigerant used. The room must be 1m

size for every 8g of R600a refrigerant inside the appliance. The amount of

refrigerant in your particular appliance is shown on the identification plate

inside the appliance. Never start up an appliance showing any signs of

damage. If in doubt, consult your dealer.

WARNING

w Keep ventilation openings, in the appliance enclosure or in the built-in structure,

clear of obstruction.

w Do not use mechanical devices or other means to accelerate the defrosting

process, other than those recommended by the manufacturer.

w Do not damage the refrigerant circuit.

w Do not use electrical appliances inside the food storage compartments of the

appliance, unless they are of the type recommended by the manufacturer.

w The refrigerant and insulation blowing gas used in the appliance require special

disposal procedures. When disposal, please consult with service agent or a

similarly qualified person.

PARTS AND FEATURES

Use this page to become more familiar with the parts and features. Page references are included for

your convenience.

NOTE: This guide covers several different models. The refrigerator you have purchased may

have some or all of the items listed below. The locations of the features shown below may not

match your model.

Led Interior Lamps

Filter (Inside) (p. 32)

Modular Door Bins (p. 29)

In Door Ice bin(p.24)

Shelves (p. 27)

Crisper (p. 28)

(Keeps fruits and vegetable fresh and crisper)

Glide’N’Serve (p. 28)

Ice Bin (p. 30)

Dairy Bin (p. 29)

Utility Bin (p. 29)

Bottle Holder (p. 27)

Pull out Drawer (p. 31)

Divider (p. 31)

Durabase (p. 30)

UNPACKING YOUR REFRIGERATOR

Remove tape and any temporary labels from your

refrigerator before using. Do not remove any

warning-type labels, the model and serial number

label, or the TechSheet that is attached to back

wall of the refrigerator.

To remove any remaining tape or glue, rub the

area briskly with your thumb. Tape or glue residue

can also be easily removed by rubbing a small

amount of liquid dish soap over the adhesive with

your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol,

flammable fluids or abrasive cleaners to remove

tape or glue. These products can damage the

surface of your refrigerator. For more information,

see the Important Safety Instructions section.

Refrigerator shelves are installed in the shipping

position.

Please reinstall shelves according to your

individual storage needs.

INSTALLATION

1. To avoid vibration, the unit must be level. If

required, adjust the leveling screws to

compensate for unevenness of the floor. The

front should be slightly higher than the rear to

aid in door closing. Leveling screws can be

turned easily by tipping the cabinet slightly. Turn

the leveling screws clockwise ( ) to raise the

unit, counterclockwise ( ) to lower it.

2. Install this appliance in an area where the

temperature is between 13°C and 43°C. If the

temperature around the appliance is too low or

high, cooling ability may be adversely affected.

To ensure proper air circulation around the

fridge -freezer, please maintain sufficient space

on both the sides as well as top and maintain at

least 2 inches (5 cm) from the rear wall.

CAUTION: Avoid placing the unit near heat

sources, direct sunlight or moisture.

1. Clean your refrigerator thoroughly and wipe off

all dust accumulated during shipping.

2. Install accessories such as ice cube bin,

drawers, shelves, etc., in their proper places.

They are packed together to prevent possible

damage during shipment.

3. Let your refrigerator run for at least 2 or 3 hours

before putting food in it. Check the flow of cold

air in the freezer compartment to ensure proper

cooling. Your refrigerator is now ready for use.

WARNING

• Be careful when you work with hinge, base

grille, stopper etc. You may be injured.

• Do not put hands or foot or metal sticks into air

vents, base grille or bottom of refrigerator. You

may be injured or receive an electrical shock.

BASE COVER

To remove the base cover

1. Open the Freezer Drawer. (Drawer not shown

for clarity.)

2. Once drawer is open there is sufficient

clearance to remove screws on top of cover.

To replace base cover:

• Place cover into position and insert and tighten

screws.

REFRIGERATOR INSTALLATION

WARNING

Excessive Weight Hazard

Use two or more people to move and install

refrigerator.

Failure to do so can result in back or other injury.

WARNING

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the

refrigerator for cleaning or service, be sure to

protect the floor. Always pull the refrigerator

straight out when moving it. Do not wiggle or

walk the refrigerator when trying to move it, as

floor damage could occur.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion

or fire.

REFRIGERATOR INSTALLATION

HOW TO REMOVE DOOR HANDLES

To move refrigerator through a house door, it maybe necessary to remove the refrigerator door

handles.

NOTE: Handle appearance may

vary from illustrations on this

page.

1. Removing Refrigerator Handle

• Grasp the handle tightly with

both hands and slide the handle

up (1)(this may require some

force).

• The keyhole slots (2) on the

back of the handle allow the

handle to separate from the

mounting screws (3).

CAUTION: It could be

damaged and broken when

you hit with hammer while you

remove and attach the handle.

CAUTION: When you

assemble or disassemble

handle, you must push and pull

with moment force.

2. Removing Freezer Drawer

Handle

• Press the handle against door

first.

• Grasp the handle tightly with

both hands and slide the handle

to right (1) (this may require

some force).

• The keyhole slots (2) on the

back of the handle allow the

handle to separate from the

mounting screws (3).

Keyhole slots

on back of

handle

Keyhole slots on

back of handle

Screws

mounted

on door

Screws

mounted

on door

REFRIGERATOR INSTALLATION

HOW TO REPLACE DOOR HANDLES

NOTE: Handle appearance may vary

from illustrations on this page.

1. Replacing Refrigerator Door

Handle

• Align keyhole slots (1) on the top

and bottom of the back of the handle

with the screws (2) mounted on the

front of the door.

• Press the handle against the door

front, making sure that the screws

(2) go into the keyhole slots (1).

• Holding the handle with both hands,

press it firmly against the front of the

door and slide the handle down (3).

2. Replacing Freezer Drawer Handle

• Align keyhole slots (4) on the right

and left sides of the back of the

handle with the screws (5) mounted

on the front of the drawer.

• Press the handle against the drawer

front, making sure that the screws

(5) go into the keyhole slots (4).

• Holding the handle with both hands,

press it firmly against the front of the

drawer and slide the handle to the

left (6).

Screws

mounted

on door

Screws

mounted

on door

Keyhole slots

on back of

handle

REFRIGERATOR INSTALLATION

REMOVING AND REPLACING

REFRIGERATOR DOORS

To remove the left refrigerator door:

Pull the water tube out of the fitting while pressing

the release ring on the fitting. When you pull out

the tube, first you have to push the collet by

opposite direction of arrow in the upper picture

and tube pull out by direction of arrow.

CAUTION: Before you begin, remove food and

bins from the doors.

1. Open the door. Remove the top hinge cover

screw (1).

2. Use a flat-head screwdriver to pry back the

hooks (not shown) on the front underside of

the cover (2). Lift up the cover.

3. Remove the cover. Pull out the tube (3).

4. Disconnect all the wire harnesses (4).

5. Remove the grounding screw (5)

6. Rotate hinge lever (6) counterclockwise and

remove. Lift the top hinge (7) free of the hinge

lever latch (8).

IMPORTANT: When lifting the hinge free of the

latch, be careful that the door does not fall

forward.

• Lift the door from the middle hinge pin and

remove the door.

• Place the door, inside facing up, on a

nonscratching surface.

To remove the right refrigerator door:

1. Open door. Loosen top hinge cover screw (1).

Lift up cover (2).

2. Remove cover.

3. Disconnect wire harness (3)

4. Rotate hinge lever (4) clockwise and remove.

Lift top hinge (5) free of hinge lever latch (6).

IMPORTANT: When lifting the hinge free of the

latch, be careful that the door does not fall

forward.

• Lift the door from the middle hinge pin and

remove the door.

• Place the door, inside facing up, on a non-

scratching surface.

Collet

(1)

(2)

(4)

(3)

(6)

(7)

(8)

(5)

(1)

(2)

(4)

(5)

(6)

(3)

1. Insert the tube until you can see only one of

the lines printed on the tube.

2. After inserting, pull the tube to ascertain that it

is secure.

3. Assemble the clip.

REFRIGERATOR INSTALLATION

Replacing Refrigerator Door:

❿❿

Right Door

• Lower the door onto middle hinge pin (7).

• Fit top hinge (5) over hinge lever latch (6) and

into place. Insert hinge lever (4) under lever

latch. Rotate lever counterclockwise to secure

hinge.

• Connect wire harnesses (3).

• Hook tab on door switch side of cover under

edge of wire opening in cabinet top.

Position cover (2) into place. lnsert and tighten

cover screw (1).

❿❿

Left Door

• Lower the door onto middle hinge pin (9).

• Fit top hinge (7) over hinge lever latch (8) and

into place. Insert hinge lever (6) under lever

latch. Rotate lever clockwise to secure hinge.

• Install the grounding screw (5) and connect the

three wire harnesses (4).

• Push the water supply tube into the hole on the

top case and pull it out on the backplate.

• Insert the water supply tube (3) into the

connector tube until you see only one scale

mark. (Fully insert the tube over 5/8” (15mm)).

• Hook tab on door switch side of cover (2) under

edge of wire opening in cabinet top.

Position cover into place. Insert and tighten

cover screw (1).

Correct

Incorrect

CAUTION

Collet

Insert Line

Clip

Tube

HOW TO REMOVE AND REINSTALL

THE PULLOUT DRAWER

CAUTION

• To avoid possible injury or product or property

damage, you will need two people to perform

the following instructions.

• When you remove the drawer, do not hold the

handle. It may come off and could cause injury.

• When laying the drawer down, be careful not to

damage the floor or hurt your feet with the sharp

edges on the hinge side.

Removing Pullout Drawer

1. To remove the freezer drawer, pull the drawer

open to full extension. Remove the lower

DuraBase ® basket by lifting the basket from

the rail system.

2. Separate the left and right rail cover

3. Remove the screws of the rail on both sides.

4. With both hands, hold both sides of the door

and pull it up to separate it from the rails.

5. With both hands, flex the center bar enough to

allow the gears on both ends to release from

the track.

w CAUTION: When you remove the drawer, do

not hold the handle. If it may come off and it

could cause personal injury.

w CAUTION: When laying the drawer down, be

careful not to damage the floor or hurt your

feet by the sharp edges on hinge side.

REFRIGERATOR INSTALLATION

HOW TO REMOVE AND REINSTALL

THE PULLOUT DRAWER

CAUTION

• To avoid possible injury or product or property

damage, you will need two people to perform

the following instructions.

DANGER

Risk of Child Entrapment

• To prevent accidental child and pet entrapment

or suffocation risk, DO NOT allow them to play

inside of the freezer drawer.

• DO NOT step or sit on the freezer drawer.

Reinstalling Pullout Drawer

1. To reinstall the freezer drawer, hold the center

bar with both hands and pull it out until both

rails are fully extended.

2. Hook door supports (1) into rail tabs (2).

3. Lower door into final position and tighten the

screws (3). Make sure you have a right rail

cover for each side.

4. Align the top holes of the rail cover with the top

holes of the door supports to assemble the rail

covers.

5. With the drawer pulled out to full extension,

insert the lower basket in the rail assembly.

w WARNING: To prevent accidental child and

pet entrapment or suffocation risk.

DO NOT allow them to play inside of drawer.

w WARNING: DO NOT step or sit down on

freezer.

Right

Rail Cover

Assembly Hole

Left

Rail Cover

REFRIGERATOR INSTALLATION

LEVELING AND DOOR ALIGNMENT

Leveling

After installing, secure the product with the LEG

not to move left or right.

Your refrigerator has two front leveling screws—

one on the right and one on the left. If your

refrigerator seems unsteady or you want the

doors to close easier, adjust the refrigerator’s tilt

using the instructions below:

1. Plug the refrigerator’s power cord into a

3-prong grounded outlet. Move the refrigerator

into its final position.

2. Turn the leveling leg clockwise to raise that

side of the refrigerator or counterclockwise to

lower it. It may take several turns of the

leveling leg to adjust the tilt of the refrigerator.

NOTE: Having someone push against the top

of the refrigerator takes some weight off the

leveling legs. This makes it easier to adjust the

legs.

3. Open both doors again and check to make

sure that they close easily. If not, tilt the

refrigerator slightly more to the rear by turning

both leveling screws clockwise. It may take

several more turns, and you should turn both

leveling screws the same amount.

4. Re-adjust if necessary.

5. Replace the base cover.

NOTE: Your new refrigerator is uniquely

designed with two fresh food doors. Either door

can be opened or closed independently of one

another. You may have to exert slight pressure

on doors to get them to close completely.

Door Alignment

If the space between your doors is uneven, follow

the instructions below to align the doors:

1. With one hand, lift up the door you want to

raise at middle hinge.

2. With other hand, use pliers to insert snap ring

as shown.

3. Insert additional snap rings until the doors are

aligned. (Three snap rings are provided with

unit.)

w CAUTION

• To avoid possible injury or product or property

damage, you will need two people to perform

the following instructions.

Level the refrigerator by using an 11/32 inch

(8mm) wrench or a flat blade screw driver.

Turn the leveling legs (CCW) to raise or (CW) to

lower the height of the front of the refrigerator.

NOTE: The front of the refrigerator should be

slightly higher than the back.

NOTE: If someone pushes backward against the

top of the refrigerator, weight is lifted off of the

leveling legs, which makes adjustment easier.

Open both doors to make sure they close easily.

If not, raise the leveling legs higher by turning

both clockwise the same amount. Once the

refrigerator is level, replace the kick-plate.

NOTE: Your new refrigerator is uniquely

designed with two fresh food doors. Either door

can be independently opened or closed.

You will have to exert slight pressure on the

doors to close them completely.

NOTE: In order not to move the refrigerator back

and forth, fix it with the 'Adjust' to the floor to

install and use.

USING YOUR REFRIGERATOR

ENSURING PROPER AIR

CIRCULATION

In order to ensure proper temperatures, air must

flow between the refrigerator and freezer

sections. As shown in the illustration below, air

enters at top of freezer and circulates down.

From bottom of freezer, air is forced up to top of

refrigerator. Air enters refrigerator through top

vent, then circulates and exists at bottom, where

it returns to freezer.

MULTI-FLOW

• Multi-Flow means powerful and effective cooling

operation. This is especially noticeable when

new food is placed in the refrigerator

compartment.

• If water or foreign substances enter the cool air

vent while cleaning, efficiency will be lowered. In

addition, if gasket is damaged, efficiency may

be lowered because of escaping cool air.

Do not block any of cool air vents with food

packages. If the vents are blocked, airflow will be

interrupted and temperature and moisture

problems may occur.

IMPORTANT: Because air circulates between

both sections, any odors formed in one section

will transfer to the other. You must thoroughly

clean both sections to eliminate odors. To

prevent odor transfer and drying out of food, wrap

or cover foods tightly. (See the Food Storage

Guide section for details.)

SETTING THE CONTROLS

• The LED display shows the temperature settings,

dispenser options, water filter, door alarm, and

locking status messages.



DISPENSER SELECTION INDICATOR

Shows Cubed ice or Crushed Ice selection that will

be dispensed when the push switch is pressed.



FREEZER TEMPERATURE

Indicates the set temperature of the freezer

compartment in Celsius or Fahrenheit.



REFRIGERATOR TEMPERATURE

Indicates the set temperature of the refrigerator

compartment in Celsius or Fahrenheit.



EXPRESS FRZ.

When the EXPRESS FRZ. button is pressed, the

display will indicate the selected function has been

activated.



DISPENSER LIGHT INDICATOR

When the LIGHT button is pressed, the display will

indicate the selected function: The dispenser light is

on, this indicator will appear on the display panel.



DOOR ALARM INDICATOR

This indicator shows that the door-open warning

alarm is activated.



WATER FILTER STATUS

This indicator shows the current status for the water

filter. See Resetting the Filter Indicator.



LOCK STATUS

This indicator shows the current status for the

control panel functions is set to LOCK.

ICE TYPE

EXPRESS

FRZ.

La pagina sta caricando ...

LG Bottom freezer refrigerator Manuale utente

Marca: LG

Modello: Bottom freezer refrigerator

Categoria: Frigo-congelatori

Tipo: Manuale utente

Questo manuale è adatto anche per

GR-L218USJV

Scarica il pdf

rapporto

in altre lingue

English: LG Bottom freezer refrigerator User manual

LG Bottom freezer refrigerator Manuale utente

Questo manuale è adatto anche per

LG Bottom freezer refrigerator Manuale utente

in altre lingue

Documenti correlati

Altri documenti