Gigaset A420A Duo Guida utente
- Categoria
- Telefoni
- Tipo
- Guida utente
Questo manuale è adatto anche per
1
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Gigaset A420
The handset at a glance
1 Charge status of the batteries
2 Signal strength
3Display keys
4 End call key and On/Off key
5 Talk key/Handsfree key
6 Control key (
p)
ª Audio settings
INT Internal call
â
Directory
|
Muting during a call
7 Key 1
Open the network mailbox
8 Star key
Ringers on/off (press and hold);
with an open connection:
switch from pulse dialling to
tone dialling (press briefly)
9 Key 0/recall key
Consultation call (flash): press
and hold
10 Hash key
Keypad lock on/off (press and
hold); toggles between upper/
lower case and digits; inserts a
dialling pause (press and hold)
11 Microphone
Handset display keys:
Pressing a key launches the function
that appears above that key in the dis-
play.
Please note
New messages in the calls list/net-
work mailbox list are indicated in
the display by the message New
messages, the left display key
flashes (if set
¢ page 8).
Display Function when pressed
’
Open calls list (¢ page 8).
§Menu§
Open main/submenu
(see menu overview
¢ page 15).
”
Go back one menu level.
Y
Scroll up/down or adjust vol-
ume with
q
.
X
Move cursor to left/right
with
r.
Ü
Backspace deletes one
character at a time.
§OK§
Confirm menu function or
save entry.
Ð
U
INT 1
23.04. 10:53
‘
Menu
The base station at a glance
Registration/paging key:
Search for handsets (press
briefly, paging
¢ page 9)
Register handsets (press and
hold
¢ page 9).
ECO DECT
During a call, the transmission power is automatically adjusted to the distance
between handset and base station, the smaller the distance, the lower the
transmission power (radiation). In idle status the transmission power of the
handset is switched off. Only the base station ensures contact with the hand-
set using low radio signals.
Your phone offers you the opportunity to further reduce the transmission
power:
1) Reducing transmission power (eco mode)
If the setting Max. Range is switched to off (menu tree
¢ page 16), the trans-
mission power in standby mode and during a call is reduced up to 80% at half
range.
2) Deactivating transmission power (eco mode+)
With the setting No Radiation (menu tree
¢ page 16), you turn off the trans-
mission power of the base station in standby mode completely. Please note:
◆ All registered handsets must support this feature.
◆ For quick connection of incoming calls the handset repeatedly switches
to reception mode for short periods. This increases energy consumption
and therefore reduces the standby and talk times.
1
2
3
4
5
6
7
8
9
10
11
2
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Safety precautions
First steps
Check the package contents
Base station and handset package: One Gigaset handset, one Gigaset A420 base station, one mains adapter, one phone
cord, two batteries, one battery cover, one user guide.
Handset and charging cradle package: One Gigaset handset,
one charging cradle with mains adapter, two batteries,
one battery cover, one user guide.
If you have purchased a model with
multiple handsets, the package should contain two batteries, a battery cover and
a charging cradle with mains adapter for each additional handset.
Setting up the base station and charging cradle (if included)
The base station and charging cradle are designed for use in enclosed dry rooms with a temperature range of +5 °C to
+45 °C.
¤ Set up the base station at a central location on a flat, non-slip surface in your house or apartment. You can also
mount the base station and charging cradle on the wall.
The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and
poli
shes used on today's furnishings, the occurrence of marks on the surfaces cannot be completely ruled out.
Warning
Read the safety precautions and the user guide before use.
Explain their content and the potential hazards associated with using the device to your children.
Use only the power adapter indicated on the device.
Use only rechargeable batteries that co
rrespond to the specification (see "Technical Data"). Never use a con-
ventional (non-rechargeable) battery or other battery types as this could result in sig
nificant health risks and
personal injury. Rechargeable batteries, which are noticeably damaged, must be replaced.
Using your telephone may affect nearby medical equipment. Be
aware of the technical conditions in your par-
ticular environment, e.g., doctor's surgery.
If you use a medical device (e.g., a pacemaker), please contact the device manufacturer. They will be able to
advise
you regarding the susceptibility of the device to external sources of high frequency energy (for the spec-
ifications of your Gigaset product see "Technical Data").
Do not hold the rear of the handset to your ear when it is r
inging or when speaker mode is activated. Otherwise
you risk serious and permanent damage to your hearing.
Your Gigaset is compatible with the majority of digital hearing ai
ds on the market. However, perfect function
with all hearing aids cannot be guaranteed.
The phone may cause interference in analogue hearing aids (humming or whistling) or cause them to overload.
If you r
equire assistance, please contact the hearing aid supplier.
The devices are not splashproof. For this reason do not in
stal
l them in a damp environment such as bathrooms
or shower rooms.
Do not use the devices in environments with a potential explosion hazard (e.g., paint shops).
If you give your Gigaset to a third party, make sure you also give them the user guide.
Remove faulty devices from use or have them repaired by our Service team, as these could interfere with other
wire
less services.
Please note
◆ The device cannot be used in the event of a power failure. It is also not possible to transmit emergency calls.
◆ Emergency numbers cannot be dialled if the keypad lock is activated!
Please note
Pay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m
inside buildings.
3
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Care: Wipe down the base station, the charging cradle and the handset with a damp cloth (no solvents) or an antistatic
cloth. Never use a dry cloth. This can cause static.
Please note:
◆ Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices.
◆ Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
Connecting the base station
Connecting the charging cradle (if included)
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries and closing the battery cover
¤
First connect the mains adapter 1.
¤ Then connect the telephone jack 2 and insert the
cables into the cable ducts.
Please note:
◆ The mains adapter must always be connected, as the
phone will not operate without mains connection.
◆ Only use the mains adapter and phone cord supplied.
Pin connections on telephone cables can vary.
Warning
Use only the rechargeable ba
tteries r
ecommended by Gigaset Communications GmbH (¢ page 13), i.e., never use
conventional (non-rechargeable) batteries as this could result in
significant health risks and personal injury. For
example, the batteries could explode. The phone could also malfunction or be damaged as a result of using batter-
ies that are not of the recommended type.
1
2
1
1
¤ Connect the flat plug from the power
supply
1.
¤ Plug the mains adapter into the plug
socket
2.
If you need to disconnect the plug from the
charging cradle, press the release button
3
and disconnect the plug
4.
1
2
3
4
¤ Insert the batteries
with the polarity in the
correct direction.
The polarity is indicated in
the battery compartment.
¤ Insert the battery cover from
the top.
¤ Then slide the cover upwards
until it clicks into place.
To open the battery cover, for instance to
replace the batteries:
¤ Reach into the notch at the top of the
cover and slide the cover down-
wards.
4
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Initial charging and discharging of the batteries
The correct charge status can only be displayed if the batteries are first fully charged and discharged.
Changing the display language
Change the display language if you do not understand the language currently set:
§Menu§ ¤
421
(press the keys one after the other) ¤ q (select language) ¤ §OK§ (‰ = current language)
¤ Press and hold the end call key a to return to idle status.
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be
used.
§Menu§ ¤ q Settings ¤ §OK§ ¤ Date/Time ¤ §OK§ ¤ Date ¤ ~ (enter the day, month and year in 6-digit format)
¤ §OK§ ¤ Time ¤ ~ (enter hours and minutes in 4-digit format) ¤ §OK§ (display message: Saved)
¤ a (press and hold to return to idle status).
You can move the position of an entry to the left or right by p
ressing the control key left or right r.
Please note
◆ Base station and handset package: The handset is pre-registered with the base station. If you have purchased
a model with multiple handsets, all handsets will already be registered with the base station. You do not need
to register the handset again.
However, if a handset is not registered with the base station (Re
gi
ster HS or Put into base is displayed), please
register the handset manually (
¢ page 9).
Handset and charging cradle package: please r
egister the handset manually (¢ page 9).
◆ After the first battery charge and discharge, you may place your handset in the charger after every call.
◆ Always repeat the charging and discharging procedure if you remove the batteries from the handset and rein-
sert them.
◆ The batteries may warm up during charging. This is not dangerous.
◆ After a while, the charge capacity of the batteries will decrease for technical reasons.
Please note
If your phone receives the date and time during calling line d
isplay (e.g., via your network provider, a router or
PABXs), you can specify whether this data should be copied to your phone:
¤ Press the key sequence: §Menu§ ¤ P#Q5#MI
The following is displayed; the current setting flashes:
¤ Press one of the following keys to specify, when this data should be copied to your phone:
Q Never
or
1 Once, in case the date/time is not set on your phone
or
2 Always
Your selection is displayed (e.g., 2):
¤ Press the display key §OK§.
6 h
¤ Charge the handset in the base station/charging cradle
for 6 hours.
¤ After charging, remove the handset from the base sta-
tion/charging cradle and only replace it when the batter-
ies are fully discharged.
Please note
The handset must only be placed in the designated
Gigaset base station or charging cradle.
973 SET:
[
0
]
973 SET:
[2]
5
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Display in idle status
Once the phone is registered and the time set, the idle status is shown as in this example.
Screen display
◆ Reception between the base station and the handset:
- Good to poor:
Ð ¨ § ¦
- No reception:
¥
◆ Battery charge status:
-
U Charged over 66%
-
V Charged between 34% and 66%
-
e Charged between 11% and 33%
-
= Charged less than 11%
-
= Flashes: batteries almost empty (less than 10 minutes talktime)
-
= e V U Batteries are charging
If No Radiation mode (
¢ page 16) is activated, the ½ icon is displayed in the top left.
Activating/deactivating the handset
Press and hold the a key to activate or deactivate the handset. If you place a deactivated handset in the base station
or charging cradle, it will automatically activate after approx. 30 seconds.
Your phone is now
re
ady for use.
If you have any questions about using your phone,
please read the tips on troubleshooting ("Questions and answers",
¢ page 14) or contact our Customer Care team ¢ page 14.
Menu guidance
Your telephone's functions are accessed via a menu consisting of several levels (menu overview ¢ page 15).
Main menu (first menu level)
¤
When the handset is in idle status, press the display key §Menu§ or right on the control key v to open the main menu.
The functions in the main menu are shown by means of an icon and the func
tion's name.
Selecting a function:
¤ You can scroll between functions using the control key q. The function is shown in the display.
¤ Press the display key §OK§ or the right control key vto select the displayed function. This opens the corresponding
submenu and the first entry is displayed.
If you press the display key
” or briefly the end call key a, the display returns to idle status.
Submenus
The functions in the submenu are indicated by name.
Selecting a function:
¤ You can scroll between functions using the control key q. The function is shown in the display.
¤ Press the display key §OK§ to select the displayed function. This opens the corresponding submenu and the first entry
is displayed.
If you press the display key
” or briefly the end call key a, the display returns to the previous menu level or you cancel
the operation.
Any settings you have not confirmed by pressing the display key
§OK§ are lost.
Reverting to idle status
From any point in the menu:
¤ Press and hold the end call key a or
¤ Do not press any key: after 2 minutes, the display will automatically revert to idle status.
Ð
U
INT 1
23.04. 10:53
‘
Menu
6
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Making calls
Making external calls and ending calls
External calls are calls using the public telephone network.
~
(Enter the phone number) ¤ c.
The phone number is dialled. (Or you can first press
and hold talk key c [dial tone] and then enter the number.) During
the call you can adjust the earpiece volume using
t and set the volume with q.
End the call/cancel dialling: Press
the end call key a.
You can automatically insert a network provider dialling code before any phone number (
¢ page 6).
Accepting a call
The handset indicates an incoming call by ringing and by a display on the screen.
Press the talk key
c to accept the call.
When Auto Answer is
activated (see menu overview ¢ page 16), simply remove the handset from the base station/
charging cradle.
Calling Line Identification
When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is
stored in the directory or if CNIP has been requested.
Prerequisites:
1 You have asked your network provider for the caller's number (CLIP) or name (CNIP) to be displayed on your handset
scr
een.
2 The caller has asked the network provider for his number to be identified (CLI).
External Call appears in the display if you have not requested CLIP, With
held appears if the caller has withheld CLI, and
Unavailable appears if CLI has not been requested.
Handsfree operation
In handsfree mode, you activate the loudspeaker so that you can hear the caller without having to hold the handset to
your ear. During a callyou can activate or deactivate handsfree mode by pressing the handsfree key
d.
During the call in handsfree mode you can adjust the
handsfree volume by pressing t and set the volume with q.
Muting
You can deactivate your handset's microphone during a call. Press the right control key v to mute the handset. Press
the control key
v again to reactivate the microphone.
Automatic network provider preselection
You can store a call-by-call number (preselection number), which is automatically placed in front of numbers when you
dial them. If, for example, you wish to make international calls via special network providers, you can save the relevant
dialling code here.
In the "With Preselect" li
st, specify the dialling codes or the first digits of the dialling codes that you wish to assign to the
preselection number.
In the "Without Presel."
list, enter any exceptions to the "With Preselect" list.
Enter preselection number via menu (
¢ page 16).
Permanently deactivating preselection: Dele
te the preselection number with Ü.
Temporarily cancelling preselection:
(press and hold)
¤ §Menu§ ¤ q Preselect off ¤ §OK§ ¤ ~ (enter number) or s (use number from directory) ¤ The
number is dialled without Preselection.
Example:
Presel. Number 0999
With Preselect 08
Without Presel. 081
084
Phone number Dialled number
07112345678
¤ 07112345678
08912345678
¤ 0999 08912345678
08412345678
¤ 08412345678
All numbers that start with 08, except
for 081 and 084, are dialled with the
preselection number 0999.
c
7
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Using the directory and lists
Directory
To open the directory: press control key s.
You can save up to 100 phone num
bers (max. 22 digits) with corresponding names (max. 16 characters).
Enter letters/characters
¢ page 13.
Storing the first number in the directory
s
¤ New Entry? ¤ §OK§ ¤ ~ (enter number) ¤ §OK§ ¤ ~ (enter name) ¤ §OK§
Storing further numbers in the directory
s
¤ §Menu§ ¤ New Entry ¤ §OK§ ¤ ~ (enter number) ¤ §OK§ ¤ ~ (enter name) ¤ §OK§
Selecting a directory entry
Open the directory with s. You have the following options:
◆ Use q to scroll through the entries until the required name is selected.
◆ Enter the first character of the name and scroll to the entry with q, if required.
Dialling with the directory
s
¤ q (select entry) ¤ c
Using other functions
s ¤ q (select entry) ¤ §Menu§
The following functions can be selected with q:
Using shortcut keys
You can assign directory entries to the keys 2–9:
s ¤ q (select entry) ¤ §Menu§ ¤ q Shortcut ¤ §OK§
¤ q (select key) ¤ §OK§ or ~ (press the key you want to assign the entry to)
To dial, press and hold th
e required shortcut key.
Sending the directory to another handset
Prerequisites:
◆ The sending and receiving handsets must both be registered to the same base station.
◆ The other handset and the base station can send and receive directory entries.
s ¤ q (select entry) ¤ §Menu§ ¤ q Send Entry / Send List ¤ §OK§
¤ q (Select the internal party) ¤ §OK§ or ¤ ~ (enter the internal number of the receiving handset)
Last number redial list
This list contains the ten last dialled numbers.
Dialling from the last number redial list
c
(press briefly) ¤ q (select entry) ¤ c
New Entry Save new phone number.
Show Number Display the phone number.
Show Name Display the name.
Edit Entry Edit selected entry.
Use Number Edit the number or open the directory by pressing the control key s to insert a number from the
directory at the current position. Then dial or use other functions with
§Menu§.
Delete Entry Delete selected entry.
Send Entry Send a single entry to another handset (¢ page 7).
Delete List Delete all directory entries.
Send List Send the complete list to another handset (¢ page 7).
Shortcut For shortcuts, assign the current entry to a key.
8
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Managing entries in the last number redial list
c (press briefly) ¤ q (select entry) ¤ §Menu§
You can select the following settings:
Calls list/network mailbox list
Press the display key ’ , to open the list overview. If you have new messages, only lists with new messages are dis-
played. Scroll through the lists by pressing
q.
An advisory tone sounds as soon as a new entry
appears in the calls list/network mailbox list. By default the left display
key flashes and the message New messages appears on the display. You can change this behaviour by using the follow-
ing procedures:
¤ Press the key sequence: §Menu§ ¤ P#Q5#M
The following is displayed:
¤ Press one of the following keys to select the message type:
5 for missed calls
or
M for messages on the network mailbox
Your selection is displayed (e.g., 5 for mis
sed calls); the current setting flashes:
Press key
Q or 1, to set the behaviour for new messages:
Q The presence of new messages is displayed (default setting).
or
1 The presence of new messages is not displayed.
Your selection is displayed (e.g., 1):
¤ Press the display key §OK§.
Settings will only be changed once a new message has been received.
Calls list
Prerequisite: CLIP (¢ page 6)
Depending on the type of list set, the c
alls list contains (¢ page 16):
◆ Answered calls
◆ Missed calls
Depending on the type of list set, all numbers of the
last 25 incoming calls are saved or just the missed calls are saved.
Open the calls list
’ ¤ q CallsList
The calls list is displayed as follows:
Number of new entries + number
of old,
read entries
Press
§OK§ to open the list.
The last incoming call is displayed. If necessary, use
q to select another entry.
Use Number Edit the number or open the directory by pressing the control key s to insert a number from the
directory at the current position. Then dial or use other functions with
§Menu§.
Copy to Dir. Copy an entry to the directory.
Delete Entry Delete selected entry.
Delete List Delete all entries.
Please note
When calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made
(dependin
g on your network provider).
97
975 SET:
[
0
]
975 SET:
[
1
]
CallsList 01+02
9
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Using other functions
q (select entry) ¤ §Menu§
The following functions can be selected with q:
Calling back a caller from the calls list
’ ¤ q CallsList 01+02 ¤ §OK§ ¤ q (select entry) ¤ c
Network mailbox list
You can use these lists to listen to messages on the network mailbox (¢ page 9).
Network mailbox
The network mailbox is the answering machine in your provider's telephone network. More information is available from
your provider. You cannot use the network mailbox unless you have requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list (
¢ page 8), the menu (¢ page 15)
and to use fast access (
¢ page 1), you will need to enter the number in your phone:
§Menu§ ¤ q Answer Machine ¤ §OK§ ¤ q Net Mailbox ¤ ~ (enter number) ¤ §OK§
Locating a handset (paging)
You can locate your handset using the base station.
¤ Briefly press the registration/paging key on the base station (¢ page 1).
All handsets will ring at the same time (paging), e
ven if the ringers are switched off.
Ending paging: Brie
fly press the registration/paging key on the base station (¢ page 1) or press the talk key c or the
end call key
a on the handset.
Registering handsets manually
You can register up to four handsets on your base station. Each additional handset must be registered on the base sta-
tion in order for it to work properly!
Registration takes approx. 1 minute. Once the regi
stration process has been completed successfully, the display briefly
shows HS registered and returns to idle status. Handsets are ass
igned the lowest available internal number (1-4). If the
internal numbers 1–4 are already assigned to other devices, the number 4 will be overwritten.
De-registering handsets
You can de-register all other registered handsets from each of the registered Gigaset handsets.
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q De-register HS ¤ q Select the internal party you wish to de-
register. The handset you are currently using is indicated by <.
¤ §OK§ ¤ Enter the base station system PIN (default setting:
0000)
¤ §OK§
Delete Entry Delete current entry.
Copy to Dir. Copy an entry to the directory.
Date/Time Call date and time (if set).
Status New Call: new missed call. Old Call: entry already read.
Show Name If you have requested CNIP, you can view the name and town that are registered for this phone
number with your network provider.
Delete List Warning! All old and new entries will be deleted.
1) On the handset
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Register HS ¤ Enter the base station system PIN (default set-
ting: 0000)
¤ §OK§ ¤ Registering is displayed.
2) On the base station
Within 60 seconds, press and ho
ld th
e registration/paging key on the base station (¢ page 1) for approx. 3 seconds.
10
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Using multiple handsets
Making internal calls
Internal calls are free calls to other handsets that are registered to the same base station.
2 handsets are registered
Press the control key u, the other handset is called.
More than 2 handsets are registered
Calling a specific handset
u ¤
~
(1...4, enter internal number of the handset) or
u ¤ q (Select the internal party) ¤ §OK§ or c ¤ the handset is called.
Calling all handsets (group call)
Press and hold
u or u ¤ P or u ¤ q Call all ¤ §OK§ or c ¤ all handsets are called.
When a participant answers you can speak t
o him. To end the call, press a.
Internal consultation call/connecting a call
You are in conversation with an external participant. Press the control key u and call one or all handsets. The external
participant hears the hold music. When the internal participant answers: Announce the external call, if necessary.
Either
press the end call key
a. The call is transferred to the internal participant,
or
press the display key
” . You are reconnected with the external participant.
When transferring a call you can also press the end call key
a before the internal participant answers.
Listening in to an external call
You are conducting an external call. An internal participant can listen in on this call and take part in the conversation
(conference). Prerequisite: The Listening in function must be activated.
Activating/deactivating listening in
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Base ¤ §OK§ ¤ q Listening in ¤ §OK§ (‰ = on)
Internal listening in (conference)
You want to listen in to an existing external call. Press and hold the c key. You can listen in to the call. All participants
hear a signal tone.
To end: press the end call key
a. All participants hear a signal tone.
If the first internal pa
rticipant presses the end call key a, the handset that has "listened in" remains connected to the
external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
§Menu§ ¤ q Alarm Clock ¤ §OK§ ¤ Activation ¤ §OK§ (‰ = on)
When activated:
¤ ~ (Set the wake-up time) ¤ §OK§
When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon l will
appear on the screen and the wake-up time will be displayed instead of the date.
Setting the wake-up time
§Menu§ ¤ q Alarm Clock ¤ §OK§ ¤ q Wake-upTime ¤ §OK§
Enter the wake-up time in hours and minutes, then press §OK§.
Phone settings
For details on activating/deactivating advisory tones and battery low tones, see menu tree (¢ page 15).
For details on setting the displ
ay contrast and large dialling numbers, see menu tree (¢ page 16).
For details on how to set the syst
em PIN on the base station, see the menu overview (¢ page 16).
Changing the display language
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Language ¤ §OK§ ¤ q (select language) ¤ §OK§
The current language is indicated by
‰.
If you accidentally choose a language you do not understand:
§Menu§ ¤
421
(press the keys one after the other) ¤ q (select language) ¤ §OK§
11
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Changing the handsfree/earpiece volume
In idle status:
t ¤ Handset Volume ¤ §OK§ ¤ q Earpiece/Speaker ¤ §OK§ ¤ q (set the volume level 1 to 5)
¤ §OK§ (‰ = selected)
During a conversation via the earpiece or
in handsfree mode:
t ¤ q (set the volume level 1 to 5)
The setting will automatically be save
d after approximately 3 seconds or press the display key §OK§.
You can also set the handsfree/earpiece volume using the menu Aud
io Settings (¢ page 15).
Setting the sound of the earpiece
Adapt the sound of the earpiece to your needs.
◆ Low: Standard setting.
◆ High: High frequencies are emphasized.
In idle status:
t ¤ q Handset Sound ¤ §OK§ ¤ q Low/High ¤ §OK§ (‰ = selected)
You can also set the sound of the earpiece using the menu Audi
o Settings (¢ page 15).
Setting ring tones of the handset
Setting the ringer volume
In idle status:
t ¤ q Ringer Volume ¤ §OK§ ¤ q (set the volume level 1 to 5 or "Crescendo") ¤ §OK§ (‰ = selected)
You can also set the call volume using the menu Audi
o Settings (¢ page 15).
Setting the ringer melody
Set different ringer melodies for External Calls, Internal Calls and the Alarm Clock.
In idle status:
t ¤ q Ringer Melody ¤ §OK§ ¤ q External Calls / Internal Calls / Alarm Clock ¤ §OK§ ¤ q (select melody)
¤ §OK§ (‰ = selected)
You can also set the call volume using the menu Audi
o Settings (¢ page 15).
Time Control (day/night mode)
You can specify a time period when you do not want the telephone to signal external calls e.g., during the night.
Activating Time Control:
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Time Control ¤ §OK§ ¤ Activation ¤ §OK§ (‰ = activated)
Setting time period:
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Time Control ¤ §OK§ ¤ q Settings ¤ §OK§
¤ Off from:
~
(Enter time in 4-digit format) ¤ §OK§ ¤ Off until:
~
(Enter time in 4-digit format) ¤ §OK§
Anonymous calls silent
You can set your handset so that it doesn't ring for calls where Calling Line Identification has been withheld. The call will
only be signalled on the display.
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q An.Call Silent ¤ §OK§ (‰ = activated)
Activating/deactivating the ringer
Deactivating/reactivating the ringer permanently
In idle status, press and hold the
star key P. If the ringer is deactivated, the
Ú
icon appears in the display.
Deactivating the ringer for the current call
§Menu§ ¤ Silent ¤ §OK§
Activating/deactivating music on hold
You can set that your external participant hears music in case of internal recall and during call transfer.
§Menu§ ¤
P#Q5#1M
¤ The number for the current setting flashes: 0 = off; 1 = on ¤ enter number ¤ §OK§.
Repeater mode
With a repeater, you can increase the range of your base station. You will need to activate repeater mode (¢ page 16).
Repeater mode and No Radiation
mode (¢ page 16) cancel each other out.
12
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's
registration to the base station will be retained.
§Menu§ ¤ q Settings ¤ §§OK§§ ¤ q Handset ¤ §§OK§§ ¤ q Reset Handset ¤ §§OK§§ ¤ Reset? ¤ §§OK§§
Restoring the base station
When restoring factory settings:
◆ Individual settings are reset.
◆ All lists are deleted.
◆ The No Radiation mode is deactivated.
The date and time are retained.
Resetting the base station via the menu
When resetting via the menu
◆ Handsets are still registered.
◆ The system PIN is not reset.
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Base ¤ §OK§ ¤ q Base Reset ¤ §OK§ ¤ Reset? ¤ §OK§
Resetting the base station using the key on the base station
When resetting the base station using the key on the base station
◆ All handsets are de-registered and
◆ The system PIN is reset to the original code 0000.
Carry out the following steps: Re
move the mains cable from the base station. Hold down the registration/paging key
on the base station (
¢ page 1) and reconnect the power cable to the base station at the same time. Hold the key down
for at least 5 seconds.
Operating the base station on the PABX/router
Operating on the router
When operating the Gigaset on an analogue port of a router, you can reduce problems with echoing by activating the
XES Mode (
¢ page 16). If you have no problems with echoing, this function should be deactivated.
Operating on the PABX
The following settings are only necessary when your PABX requires them, see the user guide for your PABX.
When entering the digits, enter them slowly one afte
r the other.
Changing the dialling mode
§Menu§ ¤
P#Q5#1N
¤ The number for the set dialling mode flashes: 0 = touch tone dialling (DTMF);
1 = dial pulsing (DP)
¤ enter number ¤ §OK§.
Setting recall
§Menu§ ¤
P#Q5#1Q
¤ The number for the current recall flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; 7 = 800 ms
¤ enter number ¤ §OK§.
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key
c and sending the phone number.
§Menu§ ¤
P#Q5#1L
¤ The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.
¤ enter number ¤ §OK§.
Changing the pause after the recall key
§Menu§ ¤
P#Q5#12
¤ The number for the current pause length flashes: 1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms
¤ enter number ¤ §OK§.
13
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Appendix
Entering letters/characters
Technical Data
Batteries
Technology: Nickel-metal-hydride (NiMH); Size: AAA (Micro, HR03); Voltage: 1,2 V; Capacity: 450 - 1000 mAh
Handset operating times/charging times
Your handset can charge batteries up to a capacity of 1000 mAh. The use of special high-performance batteries or bat-
teries with high capacities is not recommended
for cordless phones.
The operating time of your Gigaset depends on the capacity and age of the batteries and the way it is used. (Standby
time/talk
time/operating time are maximum possible values, charging times are typical values.)
Due to the constant progression in battery development, the list of recommended batteries in the FAQ section of the
Gigase
t Customer Care pages is regularly updated:
www.gigaset.com/service
General specifications
Standard characters
Press the relevant key the number of
times indicated.
Briefly press the hash key
# to
switch from "Abc" to "123" mode,
from "123" to "abc" mode and from
"abc" to "Abc" mode.
Capacity (mAh) approx.
550 700 800 1000
Standby time (hours) 220 255 295 360
Talktime (hours) 14 17 19 24
Operating time for 1.5 hrs of calls per day (hours),
No Radiation mode switched
off/on 115/85 1
35/95 150/110 190/135
Charging time in base station (hours) 6 7 8 10
Charging time in charger (hours) 5.5 6.5 7 9
Base station power consumption
In standby mode
– Handset in base station
– Handset outside base station
ca. 1.0 W
ca. 0.8 W
During a call ca. 1.0 W
DECT standard is supported
GAP standard is supported
Range up to 300 m outdoors, up to 50 m indoors
Base station power supply 230 V ~/50 Hz
Environmental conditions in operation +5 °C to +45 °C, 20% to 75% relative humidity
1) Space
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x
1 1£$¥¤
2 abc2äáàâãç
I def 3ëéèê
4 gh i4ïíìî
5 jkl5
L mno6öñóòôõ
M pqr s7ß
N tuv8üúùû
O wx y z 9ÿ ýæøå
Q .,?!0+-:¿¡"’;_
P
* / ( ) <=>%
#
#@\ &§
1)
14
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Questions and answers
If you have any queries about the use of your telephone, visit our website at www.gigaset.com/service
for 24-hour support. The table below contains a list of c
ommon problems and possible solutions.
Contact with liquid
If the handset has come into contact with liquid:
1 Switch the handset off and remove the battery immediately.
2 A
llow the liquid to drain from the handset.
3 Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry,
warm plac
e for at least 72 hours (not in a microwave, oven etc.).
4 Do not switch on the handset again until it is completely dry.
Wh
en it has fully dried out, you will usually be able to use it again.
Service (Customer Care)
We offer you support that is fast and tailored to your specific needs!
Our Online Support on the Internet:
www.gigaset.com/service
For more information on aftersales service,
please refer to your local warranty card. In some countries repair and replace
services are impossible where the products are not sold through our authorised dealers.
Problem Cause Solution
Nothing appears on
the displa
y.
The handset is not switched on.
The batteries are flat.
Press the end call key a for approx. 5 seconds or place
the handset in the base station.
Charge or replace the batteries.
No wireless connec-
tion to the base sta-
tion, Ba
se flas
hes in
the display.
The handset is outside the range of
the base station.
Th
e base station is not turned on.
Move the handset closer to the base station.
Check the mains connector on the base station
¢ page 3.
The display shows
Register
HS or Put
into base.
Handset has not been registered
with the base station or has been
de-registered.
Register the handset ¢ page 9.
Handset does not
ring.
Th
e ring tone is deactivated.
The phone only rings if the phone
number
has been transferred.
The phone does not ring in a spe-
cific time period.
Activate the ring tone
¢ page 11.
Activate the ring tone for anonymous calls
¢ page 11.
Deactivate the "Time Control" or change the time period
¢ page 11.
You cannot hear a
ringer/di
alling tone
from the fixed line
network.
The phone cord supplied has not
bee
n used or has been replaced by
a new cord with the wrong jack
connections.
Please always use the phone cord supplied or ensure
th
at the pin connections are correct when purchasing
from a re
tailer: 3-4 assignment of telephone leads/
EURO CTR37.
Error tone sounds
aft
er system PIN
prompt.
PIN forgotten.
The system PIN you have entered is
in
correct.
Reset the system PIN to the default 0000 ¢ page 12.
All handsets are de-registered. All settings are reset.
All lists ar
e deleted.
!
15
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
Environment
Our environmental statement
We at Gigaset Communications GmbH are aware of our social responsibility. That is why we actively take steps to create
a better world. In all areas of our business – from product planning and production to sales and waste of disposal – fol-
lowing our environmental conscience in everythin
g we
do is of utmost importance to us.
Learn more about our earth-friendly products and processes online at
www.gigaset.com.
Environmental management system
Gigaset Communications GmbH is certified pursuant to the international standards ISO 14001 and ISO 9001.
ISO 14001 (Environment): Cer
tified since September 2007 by TüV SÜD Management Service GmbH.
ISO 9001 (Quality): Ce
rtified since 17/02/1994 by TüV SÜD Management Service GmbH.
Disposal
Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of
which can be obtained from your local authority.
All electrical and electronic equipment must be disposed of separately from general household waste using the sites
desig
nated by local authorities.
If a product displays this symbol of a crossed-out rubbish bi
n, the product is subject to European Directive
2002/96/EC.
The appropriate disposal and separate collection of used equip
ment serve to prevent potential harm to the
environment and to health. They are a precondition for the re-use and recycling of used electrical and elec-
tronic equipment.
For further information on disposing of your used equipment, please con
tact your local authority or your refuse collec-
tion service.
Menu overview
Your phone has an extensive range of features. These are offered in the form of menus.
To select a function while the phone is in idle status, pr
ess §Menu§ (open menu), use the control key q to scroll to the
function you require and press
§OK§ to confirm.
To return to idle status: pr
ess and hold the a key.
Not all of the functions described in this user guide are available in all countries.
é Alarm Clock
Activation ¢ page 10
Wake-upTime ¢ page 10
è Audio Settings
Handset Volume Earpiece/Speaker ¢ page 11
Handset Sound Low/High ¢ page 11
Ringer Volume ¢ page 11
Ringer Melody External Calls/Internal Calls/Alarm Clock ¢ page 11
Advis.Tones On/off
Battery Low On/off
ê
Answer Machine
Play Messages Playing back messages on the network mailbox ¢ page 9.
Net Mailbox Enter number of the network mailbox ¢ page 9.
16
Gigaset A420 / SEA en / A31008-M2402-Y701-1-7619 / Bali_SEA_en.fm / 11.06.2012
Template Bali, Version 1, 16.02.2012
ç Settings
Date/Time ¢ page 4
Handset Language ¢ page 10
Big Dial Font Set bigger digits for dialling.
Contrast Set the display contrast to 9 levels.
Time Control Activation/Settings ¢ page 11
An.Call Silent ¢ page 11
Auto Answer Activate/deactivate auto answer ¢ page 6.
Register HS ¢ page 9
De-register HS ¢ page 9
Reset Handset ¢ page 12
Base Call list type Missed Calls/All Calls ¢ page 8
System PIN Change system PIN (default is 0000).
Base Reset ¢ page 12
Additional Repeater ¢ page 11
XES Mode Activating/deactivating
(Activate in case of problems with echos on
an analogue port of a router.)
ECO DECT
¢ page 1
No Radiation/Max. Range ¢ page 1
Listening in ¢ page 10
Preselection Presel. Number/With Preselect/Without Presel. ¢ page 6
Issued by
Gigaset Communications GmbH
Frankenstr. 2a, D-46395 Bocholt
© Gigaset Communications GmbH 2012
Subject to availability.
All rights reserved. Rights of modification reserved.
www.gigaset.com
This user guide is made from 100 % recycled paper.
All rights reserved. Rights of modification reserved.
Gigaset Communications GmbH
Frankenstr. 2a, D-46395 Bocholt
Subject to availability.
www.gigaset.com
© Gigaset Communications GmbH 2012
All rights reserved.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Gigaset A420A Duo Guida utente
- Categoria
- Telefoni
- Tipo
- Guida utente
- Questo manuale è adatto anche per
in altre lingue
- English: Gigaset A420A Duo User guide