Paxar 6035 Manuale utente

Monarch



DOS-based

PATHFINDER



Ultra



System

Each product and program carries a respective written warranty, the only

warranty on which the customer can rely. Monarch reserves the right to make

changes in the product and the programs and their availability at any time and

without notice. Although Monarch has made every effort to provide complete

and accurate information in this manual, Monarch shall not be liable for any

omissions or inaccuracies. Any update will be incorporated in a later edition of

this manual.

publication may be reproduced, transmitted, stored in a retrieval system, or

translated into any language in any form by any means, without the written

permission of Monarch Marking Systems, Inc.

Trademarks

MONARCH®, PATHFINDER®, Ultra® and PATHFINDER Ultra® are registered trademarks of Monarch

Marking Systems, Inc.

6035 is a trademark of Monarch Marking Systems, Inc.

Paxar is a registered trademark of Paxar Corporation.

Microsoft, MS-DOS and Windows are trademarks of Microsoft Corporation.

TrueType is a trademark of Apple Computer, Inc.

Hewlett-Packard is a trademark of Hewlett-Packard Company.

CG Triumvirate and CG Triumvirate Bold are trademarks of AGFA Monotype Corporation.

Monarch Marking Systems, Inc.

170 Monarch Lane

Miamisburg, OH 45342

Table of Contents i

TABLE OF CONTENTS

Introduction..........................................................................................1-1

Features ...........................................................................................1-1

Terms to Know ..................................................................................1-2

Label Sizes .......................................................................................1-3

How this Manual is Organized ............................................................1-4

Getting Started..................................................................................... 2-1

Using the Keypad and the Display....................................................... 2-2

Using the Function Keys..................................................................2-3

Using the Most Common Keys ............................................................ 2-4

Reading the Display........................................................................... 2-4

Entering a Sample Format..................................................................2-5

Printing the Sample Format ................................................................2-8

Using the Operator Data Entry Form ...................................................2-9

Sample Operator Data Entry Form ................................................. 2-10

Operator Data Entry Form Page 1 .................................................. 2-11

Operator Data Entry Form Page 2 .................................................. 2-12

Configuring the Printer..........................................................................3-1

General Options ................................................................................ 3-2

Toggle Backlight.............................................................................3-2

Set Print Method............................................................................. 3-3

Set Date ........................................................................................3-3

Set Time ........................................................................................3-3

Set I2 of 5 Scan Lengths .................................................................3-4

Reset/Clear Formats .......................................................................3-4

Select Currency..............................................................................3-4

Set Supply Type ............................................................................. 3-5

Suppress Warnings.........................................................................3-5

Format Header Options ......................................................................3-5

Generate Fmt Name........................................................................3-6

ii Table of Contents

Format Text Options ..........................................................................3-6

Use Default Gap ............................................................................. 3-6

Use Default Color ........................................................................... 3-7

Set Default Color ............................................................................3-7

Use Default Character Rotation ....................................................... 3-7

Format Bar Code Options...................................................................3-8

Use Default UPC Appearance ..........................................................3-8

Set Default UPC Appearance...........................................................3-8

Use Default Alignment.....................................................................3-8

Designing a Format .............................................................................. 4-1

Design Overview ...............................................................................4-1

Determining Format Data ...................................................................4-1

Determining the Print Area .................................................................4-2

Drawing Rough Sketches ................................................................... 4-2

Using Supply Layout Grids ................................................................. 4-3

Considering Field Types.....................................................................4-4

Starting the Design Process ...............................................................4-6

Placing Fields on a Format.................................................................4-7

Defining Text Fields.............................................................................. 5-1

About Text Fields .............................................................................. 5-1

Entering a Sample Text Field.............................................................. 5-6

Printing the Sample Text Format......................................................... 5-9

Using a Combo Text Field ................................................................ 5-10

Entering a Sample Combo Text Field ................................................ 5-12

Printing the Sample Combo Format................................................... 5-17

Defining Bar Code Fields ......................................................................6-1

About Bar Code Fields .......................................................................6-1

Setting the Appearance ................................................................... 6-5

Setting the Density .........................................................................6-6

Entering Simple Bar Code Fields ........................................................ 6-6

Sample 1: Simple Fixed Bar Code ....................................................6-7

Printing the Simple Fixed Bar Code Format ......................................... 6-9

Sample 2: Simple Variable Bar Code.............................................. 6-10

Printing the Simple Variable Bar Code Format ................................... 6-13

Table of Contents iii

About Combo Bar Code Fields.......................................................... 6-14

Entering a Sample Combo Bar Code Field ......................................... 6-15

Printing the Sample Combo Bar Code Format .................................... 6-22

Bar Code Specifications ................................................................... 6-24

UPC Bar Codes ............................................................................ 6-24

EAN Bar Codes ............................................................................ 6-25

Code 128 Bar Codes..................................................................... 6-25

MSI ............................................................................................. 6-26

Interleaved 2 of 5 Bar Codes ......................................................... 6-26

Code 39 Bar Codes....................................................................... 6-26

Codabar Bar Codes ...................................................................... 6-27

Code 93 ....................................................................................... 6-27

Defining Constant Text Fields................................................................7-1

About Constant Text Fields ................................................................ 7-1

Entering a Sample Constant Text Field................................................7-5

Printing the Sample Constant Text Format........................................... 7-8

Defining Line Fields..............................................................................8-1

About Line Fields ..............................................................................8-1

Entering a Sample Line Field (Segments) ............................................ 8-3

Printing the Sample Line (Segment) Format.........................................8-5

Entering a Sample Line Field (Vectors) ............................................... 8-5

Entering a Sample Line Field (Vectors) ............................................... 8-6

Printing the Sample Line (Vector) Format ............................................8-8

Defining Special Fields .........................................................................9-1

About Price and System Date/Time Fields ........................................... 9-1

Entering a Sample Price Field ............................................................ 9-7

Printing the Sample Price Format........................................................9-9

Entering a Sample Date/Time Field ................................................... 9-11

Printing the Sample Date/Time Format .............................................. 9-14

Applying Data Edits ............................................................................ 10-1

Using Data Edits ............................................................................. 10-2

Printing the Format ....................................................................... 10-5

Padding Data ............................................................................... 10-6

Printing the Format ....................................................................... 10-9

iv Table of Contents

Extracting Characters ................................................................. 10-10

Printing the Format ..................................................................... 10-13

Stripping Characters ................................................................... 10-14

Printing the Format ..................................................................... 10-17

Extracting Characters from the Middle.......................................... 10-18

Printing the Format ..................................................................... 10-21

Inserting Characters ................................................................... 10-21

Inserting Characters ................................................................... 10-22

Printing the Format ..................................................................... 10-25

Make Into Price .......................................................................... 10-26

Printing the Format ..................................................................... 10-27

Make Into Shoe Size ................................................................... 10-27

Printing the Format ..................................................................... 10-31

Editing a Format................................................................................. 11-1

Copying a Format ............................................................................ 11-1

Editing a Field................................................................................. 11-2

Adding a Field .............................................................................. 11-2

Printing the Format ....................................................................... 11-4

Deleting a Field ............................................................................ 11-4

Printing the Format ....................................................................... 11-6

Modifying an Existing Field............................................................ 11-6

Printing the Format ....................................................................... 11-9

Changing Header Information ........................................................ 11-9

Printing the Format ..................................................................... 11-12

Deleting a Format.......................................................................... 11-13

Troubleshooting ................................................................................. 12-1

Troubleshooting Information ............................................................. 12-2

If You Receive an Error Message................................................... 12-2

Calling Technical Support.............................................................. 12-2

Table of Contents v

Data Errors ..................................................................................... 12-3

Format Errors (1 - 99) ................................................................... 12-3

Batch Errors (100 - 199)................................................................ 12-5

Option Errors (200 - 249) .............................................................. 12-5

Online Configuration Errors (250 - 299) .......................................... 12-6

Check Digit Errors (300 - 324) ....................................................... 12-7

General Packet Errors (400 - 435).................................................. 12-8

Data Formatting Failures.................................................................. 12-9

Machine Faults.............................................................................. 12-10

Sample Formats ...................................................................................A-1

Item Pricing ......................................................................................A-1

Item Identification............................................................................A-12

Receiving/Inventory .........................................................................A-19

Using Fonts .........................................................................................A-1

Monospaced Font Magnification..........................................................B-2

Height Magnification .......................................................................B-2

Proportional Font Magnification ..........................................................B-3

Height Magnification .......................................................................B-3

Height Magnification .......................................................................B-4

Height Magnification .......................................................................B-5

Height Magnification .......................................................................B-6

Height Magnification .......................................................................B-7

Height Magnification .......................................................................B-8

Height Magnification .......................................................................B-9

Height Magnification .....................................................................B-10

vi Table of Contents

Introduction 1-1

INTRODUCTION

The Monarch DOS-based Pathfinder Ultra Configurable printer lets

you design custom labels to fit your needs. You can use the printer for a

variety of applications.

♦ Print in-store merchandise marking labels to mark every item in your

store with scannable bar codes for increased data accuracy.

♦ Print shelf labels with the product bar code number, description, and

price.

♦ Print labels for restocking of merchandise. Just scan a bar-coded

product and the printer duplicates the bar code.

♦ Print warehouse carton labels for easy carton sorting.

Features

The flexibility of this printer also provides you with the ability to:

♦ Print a variety of tags ranging from .55 to 4.0 inches in length.

♦ Print numeric, alphanumeric, or special characters. You can print 14

fonts: monospaced or proportionally spaced fonts.

♦ Use 24 different bar codes.

♦ Print horizontally or vertically on the label.

♦ Design data entry prompts for the Operator.

♦ Scan bar codes.

♦ Select different currency symbols for International use.

♦ Print combination fields. This feature allows the Operator to enter data

once, and use it in multiple fields.

1

1-2 Introduction

Terms to Know

Barrier bar

The horizontal bars above and below I2of5 bar codes used

to ensure a clean scan and avoid partial scans.

Baseline Bottom of the font.

Check digit

A number added to a bar code ensuring that the bar code

data is read accurately.

Fixed length bar

code

A bar code with a fixed character length: UPC-A, UPC-E,

EAN-8, and EAN-13.

Font The print style of text.

Format

The layout of data on a label. The format determines where

and how data appears on a label.

Horizontal bar

code or text

Data that prints across the width of a label.

Human Readable

characters

The characters that are visible such as a text field. Bar

codes embed characters.

Intercharacter gap Default spacing between characters in monospaced fonts.

Monospaced font Font with fixed character spacing such as Letter Gothic.

Number system

code

A number added to a bar code ensuring that the bar code

data is read accurately.

Overlay

The placement of one field over another such as a line on

top of a price signifying a price reduction.

79.99

Pad Characters

Characters that are added to the left or right of a field

allowing you to fill in empty spaces when the entered data

does not fill an entire field. For example, the Operator

enters “23” and the format automatically adds zeros: 2300.

Prompt

A message on the printer’s screen that tells you to

enter/scan data.

Introduction 1-3

Proportionally

spaced font

Font with variable character spacing – all characters have

different widths. For example, an “i” versus a “w.”

Proportionally spaced fonts include CG Triumvirate, CG

Triumvirate Condensed, and CG Triumvirate Bold.

Quiet Zone

An area of white space required at the beginning and end of

a bar code to allow scanning. Also at the beginning/end and

edges of a label. Also know as non-print zone.

Segment line type A line type with a starting point and an end point.

Start/stop

character

Distinct characters used at the beginning and end of each

bar code symbol that provides initial timing references and

indicates the direction of scanning.

Variable length

bar code

A bar code of variable character length: I2 of 5, Code 39,

Codabar, Code 128, MSI, PostNet, and Code 93.

Vector line type A line type with a starting point, angle, and length of line.

Vertical bar code

or text

Data that is rotated and prints down the length of a label.

Void Light area on a label in a bar code or text.

Label Sizes

The printer allows you to print the following label sizes.

Supported Supply

Widths:

1.20 Inches

1.50 Inches

2.00 Inches

Supported Supply Lengths:

.55 inches

.785 inches

1.1 inches

1.5 inches

2.0 inches

3.0 inches

4.0 inches

NOTE: Most of the sample formats in this manual use 2” X 2” labels unless

indicated otherwise.

Call 1-800-543-6650 for more information about the various label sizes and

label types available with this printer.

1-4 Introduction

How this Manual is Organized

Chapter 1 Introduction

Provides an overview of the printer and

terms to know.

Chapter 2 Getting Started

Provides a checklist to get you started,

keypad tips, and a sample format.

Chapter 3 Configuring the Printer

Tells you how set defaults for your printer

and select print methods.

Chapter 4 Designing a Format

Provides instructions on how to determine

the kind of data you want on a label and

where to place the data.

Chapter 5 Defining Text Fields Tells you how to design a text field.

Chapter 6

Defining Bar Code

Fields

Tells you how to design a bar code field.

Chapter 7

Defining Constant Text

Fields

Tells you how to design a constant text

field.

Chapter 8 Defining Line Fields

Tells you how to design lines and

borders.

Chapter 9 Defining Special Fields

Tells you how to design time, date, and

price fields.

Chapter 10 Applying Data Edits

Tells you how to pad data, extract data,

and insert it into another field.

Chapter 11 Editing a Format Tells you how to change a format.

Chapter 12 Troubleshooting

Provides solutions to the most common

errors and provides a list of all error

codes.

Appendix A Sample Formats

Provides sample formats of various

applications.

Appendix B Using Fonts Provides information about fonts.

Getting Started 2-1

GETTING STARTED

This chapter tells you how to start using the printer and provides a

sample format to show you how easy it is to create your labels.

NOTE: Before you begin, read the Equipment Manual that came with your

printer.

Use this checklist when creating a format.

✔ Load labels into the printer.

✔ Charge the battery handle.

✔ Configure the printer. Refer to Chapter 3, “Configuring the Printer.”

✔

Create a format, which is the layout of your data on a label. Refer to

Chapter 4, “Designing a Format.”

✔ Print and test your label.

✔

Prepare an Operator Data Entry form for the Operator. Refer to “Using the

Operator Data Entry Form” at the end of this chapter.

2

2-2 Getting Started

Using the Keypad and the Display

Your printer has an 8-line display and a 48-key keypad. This section

provides tips on

♦ Navigating through the screens on the display

♦ Using the most commonly used keys.

Getting Started 2-3

Using the Function Keys

The key combinations on the list below make scrolling and navigating easier.

Key Combination Description

f 1 Turns the backlight on the display on or off.

f 2 Sets the print method.

f 3 Select the currency symbol.

f 4 Battery Level Status

f 5 Exit

f 6 Set the supply type.

f <Home>

Takes you to the beginning of a list. NOTE: If you have 11

formats, pressing f <Home> takes you to format 1.

f <End>

Takes you to the end of a list. NOTE: If you have 11 formats,

pressing f <End> takes you to format 11.

f <PgUp>

Takes you to the beginning of a list on the display. Pressing

f <PgUp> again moves one full screen length up. NOTE: If

you see options 3 through 10 on the display, pressing f

<PgUp> takes you to option 3.

f <PgDn>

Takes you to the end of a list on the display. Pressing f

<PgDn> again moves one full screen length down. NOTE: If

you see options 3 through 10 on the display, pressing f

<PgDn> takes you to option 10.

NOTE: See the Equipment Manual for information about using special

characters.

2-4 Getting Started

Using the Most Common Keys

The keys listed below are the most commonly used.

Key Description

b Returns you to the previous screen.

g Moves the cursor the left and deletes the character on the left.

e Accepts your selection.

ç,è,é,ê

Scrolls left, right, up, or down through the options on the display.

When your selection is highlighted, press e.

ç,è,

f

ç,

f

è

Left and right move the cursor inside an entry. When inside an

entry, f

ç moves the cursor to the extreme left (beginning of

data) and f

è moves the cursor to the extreme right (end of

data).

s Toggles between upper case and lower case/numeric.

fs Enters Caps lock.

f Ins

Toggles between overwrite mode and normal mode. In overwrite

mode, when you type, it replaces characters.

NOTE: See the Equipment Manual for more information.

Reading the Display

The icons listed below tell you what data entry mode you are in.

If you see You are in

F Function Key Mode.

é Upper-case Alpha Mode.

X Delete Mode. Pressing g deletes the current character.

L Caps Lock Mode.

NOTE: See the Equipment Manual for more information.

Getting Started 2-5

Entering a Sample Format

Turn on the printer. You will see the Main Menu.

- = Main Menu = -

1. Design Formats

2. Print Labels

3. Configuration

1. Press 1 to design your formats.

- = Design Menu = -

1. Create New Format

2. Edit Old Format

3. Copy Format

4. Delete Format

2. Press 1 to create a new format.

Enter Format Name

> _ _ _ _ _ _ _ _ _ _ _ _ _

L

3. Type SIZE. Press e.

Enter Length of

supply (55 – 400)

(eg. 400 = 4 inches)

> _ _ _

4. Type 200 for a 2-inch long label. Press

e.

Select Supply Width

1. 1.20 Inches

2. 1.50 Inches

3. 2.00 Inches

5. Press 3 for the supply width.

Select Type: Fld #1

1. Text Field

2. Bar Code Field

3. Constant Text

4. Line

5. Finished

6. Press 1 to define a text field.

Select Field Class

1. Simple Field

2. Price Field

3. System Date/Time

4. Complex (Merged)

7. Press 1 to define a simple field.

Numeric or

Alpha-Numeric Data?

A/N > _

L

8. Press A (alpha-numeric).

Enter Max. Length

> _ _ _

9. Type 10 as the maximum number of characters

in the field. Press e.

2-6 Getting Started

Enter Min. Length

> _ _ _

10. Type 1 as the minimum number of characters

in the field. Press e.

Enter Field Prompt

> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

L

11. Type ENTER SIZE. Press e.

Enter Fixed Data

Press ENTER if none

> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

L

12. Type /TL for the fixed data. Press e.

Add fixed data

Before or After

entry chars? B/A

> _

L

13. Press A to print the fixed data after the entry

characters.

Enter Row #

> _ _ _

14. Type 100 for the row location. Press e.

Enter Col. #

> _ _ _

15. Type 10 for the column location. Press

e.

- = Select Font = -

1. CG Trium 6.5 1000

2. CG Trium 8 pt 1001

3. CG Trium 10p 1002

4. CG Trium 12p 1003

5. CG Trium 18 p 1004

6. CG Trium 22p 1005

7. CG TrCon 6.5 1006

8. CG TrCon 8 pt 1007

9. CG TrCon 10p 1008

10. CG TrCon 12p 1009

11. CG TrCon 18p 1010

12. CG TrCon 22p 1011

13. LetGoth 6.5 1012

14. LetGoth 9pt 1013

16. Select CG Trium 8 pt 1001. Press e.

Enter Height Mag for

this font (1-7) > _

17. Press 1 for the height magnification.

Enter Width Mag for

this font (1-7) > _

18. Press 1 for the width magnification.

Getting Started 2-7

Set Justification

1. Left (L)

2. Right (E)

3. Center (B)

19. Press 1 for the alignment of characters in

the field.

Top of Field at:

1. Top of Supply

2. Left of Supply

3. Bottom of Supply

4. Right of Supply

20. Press 1 for the field rotation.

Select Edit #1

1. None

2. Make into Price

3. Pad Data Field

4. Extract Chars

5. Strip Chars

6. Extract from Mid

7. Insert Chars

8. Make Shoe Size

21. Press 1 for no data edits. See Chapter 10,

“Applying Data Edits,” for more information.

Select Type:Fld#2

1. Text Field

2. Bar Code Field

3. Constant Text

4. Line

5. Finished

22. Press 5.

Save current

format? Y/N > _

23. Press Y to save the format. You return to the

Design Menu.

2-8 Getting Started

Printing the Sample Format

After designing your format, print it to see how it looks.

- = Design Menu = -

1. Create New Format

2. Edit Old Format

3. Copy Format

4. Delete Format

1. Press b to exit the Design Menu.

- = Main Menu = -

1. Design Formats

2. Print Labels

3. Configuration

2. Press 2 to print your format.

Select Format

to Print

- = Format Menu - =

01 SIZE

3. Select SIZE and press e.

ENTER SIZE

_ _ _ _ _ _

4. Type XLarge. Press e. The label prints.

Printed: 1

5. Press the trigger to print another label or press

b to return to the prompt and print a different

label.

La pagina sta caricando ...

Paxar 6035 Manuale utente

Questo manuale è adatto anche per

Paxar 6035 Manuale utente

in altre lingue

Documenti correlati

Altri documenti