Intermec EasyCoder 4100 Manuale utente

User’s

Manual

4100 Bar Code Label Printer

P/N 057713-005

ii

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

Intermec® Corporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. technical and service support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian technical and service support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service supplier.

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and specifications in this manual are subject to change without notice.

The word Intermec, the Intermec logo, Duratran, and CrossBar are trademarks of Intermec Corporation.

The name Centronics is wholy owned by GENICOM Corporation.

IBM is a registered trademark of International Business Machines Corporation.

Throughout this manual, trademarked names may be used. Rather than put a trademark (

TM

) symbol in

every occurrence of a trademarked name, we state that we are using the names only in an editorial

fashion, and to the benefit of the trademark owner, with no intention of infringement.

iii

Helvitica condensed 9 pt italic

Code 39 18 pt

Contributors

Author Lori Austin

Mia Hayashida

Editor Craig Thompson

Technical Illustrators John Bickley

Karen Petruzzi

Technical Reviewers Scott Bale

Dzung Dang

Jim Davison

Terry Ho

Jaye Jarchow

Ed Millet

Lisa Morin

Mark Rasmussen

iv

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

Manual Change Record

This page records the changes to this manual. The manual was originally released as version 001.

Version Date Description of Change

B 12/92 Added an addendum describing new features of ribbon save and the

cutter.

001 2/93 Incorporated addendum and added the cut option. Added a new label

that can be downloaded to the printer.

002 8/93 Chapter 7 was reformatted to make it easier to use. Chapter 8 was made

to be a universal printer reference guide. Commands that are not

compatible with the 4100 printer are noted. Small changes were made to

the appendix.

003 10/93 Firmware version 2.3 addendum added to the manual. The changes were

made to the communications protocols and the configuration commands

such as end-of-print skip distance and the label rest point.

004 10/94 Manual updated to reflect the current style guide. A new file called

4100u-fr.pm4 was added. It contains all of the front matter that was

previously included in Chapter 1. What used to be Chapter 2 is now

Chapter 1, and so forth. There is no longer a Chapter 8. Firmware

version 2.4 information added to the manual. The new information

includes:

Image before print command

HIBC Code 128

New Code 128 selection to ignore brackets and spaces

Label rest location range expanded to +/-30

Top of form adjust range expanded to -10 to 4000

Reimage only changed fields

Test and Service DIP switch settable functions

Different sensitivity number for DT and TTR

005 6/95 Page numbers added to the printer command tables in Chapter 7 and

several command descriptions corrected. New cable diagrams added to

Chapter 2.

v

Helvitica condensed 9 pt italic

Code 39 18 pt

Contents

Before You Begin xix

Warranty Information xix

Safety Summary xix

Warnings and Cautions xx

About This Manual xxi

Customer Advisory xxiii

Getting Started

Introduction to the 4100 Printer 1-3

Printing Capabilities 1-3

Printer Components 1-4

Printer Component Descriptions (Front View) 1-5

Printer Component Descriptions (Front Interior) 1-7

Printer Component Descriptions (Rear View) 1-9

Printer Component Descriptions (Mechanism Detail) 1-11

Printer Options 1-12

Ribbon Save 1-12

Cutter 1-12

Unpacking the 4100 1-13

Checking the Order for Completeness 1-13

Reporting Damage or Defects 1-13

Installing the Front Panel Cover 1-14

Preparing the Printer for Installation 1-14

Plugging in the Printer 1-14

Checking the DIP Switch Settings 1-15

Opening the Printer 1-15

Loading Media 1-15

1

vi

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

If You Have Difficulty Feeding the Media 1-17

Printing Configuration Test Labels 1-18

What the Configuration Test Labels Tell You 1-18

Installing the Printer

About Printer Installation 2-3

Preparing for Installation 2-3

Situating the Printer 2-4

Connecting the Printer to the Host 2-4

Default (Point-to-Point) Installation 2-4

About Network Installations 2-5

Modem Installation Procedure 2-7

Configuring the Serial Port 2-8

Serial Port Settings 2-8

DIP Switch Settings 2-9

Connecting the Printer to a Network 2-10

Host Requirements 2-10

Communication Boundaries 2-10

Communication Protocols 2-10

Intermec “Standard” Protocol 2-11

Polling Mode D Protocol 2-12

Multi-Drop Protocol 2-12

XON/XOFF Protocol (Software and Hardware / Flow Control) 2-12

Ready/Busy Protocol 2-13

User-Defined Protocol 2-13

Communication Interfaces 2-14

RS-232C Serial Interface 2-15

RS-485 Serial Interface 2-16

RS-422 Serial Interface 2-17

Printer Serial Port 2-17

2

vii

Helvitica condensed 9 pt italic

Code 39 18 pt

Contents

Choosing the Correct Cable 2-17

Intermec Cables 2-18

Cable Schematics 2-18

RS-485 (Multi-Drop) Cables 2-20

Cabling Considerations in Noisy Electrical Environments 2-20

Operating the Printer

About Printer Operation 3-3

Opening and Closing the Printer 3-3

Opening the Printer 3-4

Closing the Printer 3-4

Using the Front Control Panel 3-4

Loading Media Into the Printer 3-5

Straight-Through Printing 3-6

Self-Strip Printing 3-8

Repositioning the Tear-Off Plate Before Printing 3-8

Loading the Media 3-8

Batch Take-Up Printing 3-10

Installing the Rewind Adapter Before Printing 3-10

Loading the Media 3-11

Fanfold Printing 3-12

Adjusting the Label Gap Sensor 3-13

Adjusting the Label Gap Sensor for Die Cut Media 3-14

Adjusting the Label Gap Sensor for Tag Stock 3-14

Setting Media Sensitivity 3-14

Setting the Approximate Sensitivity Rating for Your Media 3-15

Fine-Tuning the Sensitivity Rating 3-15

3

viii

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

4

5

4

Loading the Thermal Transfer Ribbon 3-17

Image Band Setting 3-18

How the Image Bands Command works 3-18

Optimizing the Number of Image Bands 3-18

Modified Field Reimaging 3-19

Printing Labels 3-20

Routine Maintenance

About Printer Maintenance 4-3

Safety Precautions 4-3

Inspecting the Printer 4-4

Components You Should Maintain 4-5

Lubrication 4-6

Cleaning the Printer 4-6

Cleaning the Drive Roller 4-6

Cleaning the Media Path 4-7

Cleaning the Printer Case 4-7

Cleaning the Printhead 4-8

Cleaning the Cutter Blades 4-9

Adjusting the Printhead Support 4-10

Adjusting the Printhead Alignment 4-11

Replacing the Cutter Blade 4-13

Replacing the Fuse 4-17

ix

Helvitica condensed 9 pt italic

Code 39 18 pt

Contents

Troubleshooting

About Troubleshooting 5-3

Troubleshooting Checklist 5-3

Printer Operation Problems 5-4

Print Quality Problems 5-5

Communication Problems 5-6

Error Handling 5-6

Syntax Errors 5-6

Parameter Errors 5-6

Image Overrun Errors 5-7

Invalid Numeric Character Errors 5-7

Insufficient Storage RAM Errors 5-7

Error Codes 5-8

Using Test and Service Mode 5-10

Printing Test Labels 5-12

Using Data Line Print 5-12

Performing Cloning 5-13

Performing Selective Transfer 5-14

Using Memory Reset 5-15

Changing Configuration Commands in Test and Service Mode 5-16

Setting the Number of Dot Increments 5-17

Adjusting the Label Rest Point 5-18

Using 86XX Emulation Mode 5-19

Forms Adjust 5-21

Setting the X Forms Adjust 5-22

Setting the Y Forms Adjust 5-23

Using Test and Service Mode Commands 5-24

5

x

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

Designing Labels and Using Commands

Introduction to Label Design 6-3

Using Label Formats 6-3

Communicating With the Printer 6-6

Using Intermec Label Design Software 6-6

Using the Printer Command Set 6-6

Downloading Printer Commands Using DOS 6-6

Using a Text Editor or Word Processor to Create Your Label 6-7

Downloading Printer Commands Using PC Communications

Programs or Host Terminals 6-8

Switching Between Print Mode and Program Mode 6-9

Creating Label Design Components 6-9

Different Kinds of Fields 6-10

About Bar Code Symbologies 6-10

Character Fields and Fonts 6-14

User-Defined Fonts 6-15

Downloading Fonts 6-16

Lines and Boxes 6-17

Graphics 6-18

One Bit Per Byte 6-18

Downloading One Bit Per Byte Graphics 6-19

Diamond Graphic 6-20

Six Bits Per Byte 6-20

Editing Labels and Working With Fields 6-22

Editing Labels 6-22

Deleting Fields 6-23

Scaling Fields 6-23

Magnifying Fonts and Character Fields 6-23

Magnifying Bar Code Fields 6-24

Positioning Fields 6-24

6

xi

Helvitica condensed 9 pt italic

Code 39 18 pt

Contents

Rotating Fields 6-26

Storing Label Formats 6-27

Designing Pages 6-27

Format Examples 6-28

Example 1 6-28

Example 2 6-31

Graphic for Example 2 6-31

Printer Commands

Introduction 7-3

Command Set Summary 7-3

Using Printer Commands According to Function 7-10

Program Mode 7-10

Programming 7-10

Editing a Page 7-10

Editing a Format 7-10

Editing a Bar Code Field 7-11

Editing a Human-Readable Field 7-11

Editing an Interpretive Field 7-11

Editing a Line Field 7-11

Editing a UDC Field 7-12

Editing a Box Field 7-12

Editing a UDC 7-12

Editing a Bitmap User-Defined Field 7-12

Immediate Commands 7-12

System Commands 7-12

Print Mode 7-13

Print Commands 7-13

Configuration Commands 7-13

Transmit Commands 7-14

Protocol Modification Commands 7-14

Test and Service Commands 7-14

7

xii

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

Immediate Commands 7-15

Abort Print Job 7-15

Error Code, Request 7-15

Label and Gap Length, Transmit 7-15

Remaining Quantity and Batch Count, Transmit 7-16

Reset 7-16

Status Dump 7-16

Status Enquiry 7-17

Print Mode Commands 7-18

86XX Emulation Mode, Select 7-19

Advanced Mode, Select 7-19

Alphanumeric Field Separator 7-19

Batch Count, Set 7-20

Clear All Data 7-20

Clear Data From Current Field 7-21

Command Terminator 1 7-21

Command Terminator 2 7-21

Configuration Parameters, Transmit 7-21

Cut 7-21

Data Shift – International Characters 7-22

Field, Select 7-22

Field Decrement, Set 7-22

Field Increment, Set 7-23

First Data Entry Field, Select 7-23

Font, Transmit 7-23

Form Feed 7-24

Format, Select 7-24

Format, Transmit 7-25

Increment and Decrement, Disable 7-25

Next Data Entry Field, Select 7-25

Numeric Field Separator 7-26

Options Selected, Transmit 7-26

xiii

Helvitica condensed 9 pt italic

Code 39 18 pt

Page, Select 7-26

Page, Transmit 7-27

Print 7-27

Printhead Parameters, Transmit 7-27

Program Mode, Enter 7-27

Program Number, Transmit 7-28

Quantity Count, Set 7-28

Start and Stop Codes (Code 39), Print 7-28

Storage Area Usage, Transmit 7-29

Test and Service Mode, Enter 7-29

User-Defined Characters, Transmit 7-29

User-Defined Tables, Transmit 7-30

Warm Boot 7-30

Configuration Commands 7-31

86XX or Advanced Mode on Power Up 7-31

Amount of Storage, Define 7-32

Audible Alarm, Enable or Disable 7-32

Auto-Transmit 1, Enable 7-32

Auto-Transmit 2, Enable 7-33

Auto-Transmit 3, Enable 7-33

Auto-Transmit 1, 2, and 3, Disable 7-33

Control Panel Access Permission, Set 7-34

Cutter, Enable or Disable 7-34

Dark Adjust, Set 7-34

End-of-Print Skip Distance, Set 7-34

IBM Language Translation, Enable or Disable 7-35

Intercharacter Delay, Set 7-35

Interlabel Ribbon Save, Enable or Disable 7-35

Label Rest Point, Adjust 7-36

Label Retract, Enable or Disable 7-36

Label Retract Distance, Set 7-36

Label Stock Type, Select 7-37

Label Width, Set 7-37

Contents

xiv

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

Maximum Label Length, Set 7-37

Media Sensitivity, Select 7-37

Message Delay, Set 7-38

Number of Image Bands, Set 7-38

Online or Offline on Power Up 7-38

Postamble, Set 7-39

Preamble, Set 7-39

Print Speed, Set 7-39

Printer Language, Select 7-40

Printhead Pressure, Set 7-40

Printhead Test Parameters, Set 7-40

Ribbon Save Zones, Set 7-40

Self-Strip, Enable or Disable 7-41

Top of Form, Set 7-41

Program Mode Commands 7-42

Bar Code, Select Type 7-43

Bar Code Field, Create or Edit 7-48

Bitmap Cell Height for Graphic or UDF, Define 7-49

Bitmap Cell Width for Graphic or UDF, Define 7-49

Bitmap User-Defined Font, Clear or Define 7-50

Border Around Human-Readable Text, Define 7-50

Box Field, Create or Edit 7-50

Character Bitmap Origin Offset, Define 7-51

Character Rotation or Bar Code Ratio, Define 7-51

Code 39 Prefix Character, Define 7-52

Command Tables, Load 7-52

Current Edit Session, Save 7-53

Data Source for Format in a Page, Define 7-53

Field, Delete 7-54

Field Data, Define Source 7-54

Field Direction, Define 7-55

Field Origin, Define 7-55

xv

Helvitica condensed 9 pt italic

Code 39 18 pt

Font Character Width, Define 7-56

Font Type, Select 7-56

Format, Create or Edit 7-57

Format, Erase 7-57

Format Direction in a Page, Define 7-57

Format Offset Within a Page, Define 7-58

Format Position From Page, Delete 7-58

Format Position in a Page, Assign 7-58

Graphic Type, Select 7-58

Graphic or UDC, Define 7-59

Height Magnification of Bar, Box, or UDC, Define 7-59

Human-Readable Field, Create or Edit 7-60

Intercharacter Space for UDF, Define 7-60

Interpretive Field, Edit 7-61

Interpretive Field, Enable or Disable 7-61

Length of Line or Box Field, Define 7-61

Line Field, Create or Edit 7-62

Outline Font, Clear or Create 7-62

Outline Font, Download 7-62

Page, Create or Edit 7-63

Page, Delete 7-63

Pitch Size, Set 7-63

Point Size, Set 7-63

Print Line Dot Count Limit, Set 7-64

Program Mode, Exit 7-64

User-Defined Character, Clear or Create 7-64

User-Defined Character Field, Create or Edit 7-64

User-Defined Font Character, Create 7-65

Width of Line, Box, Bar, or Character, Define 7-65

Test and Service Mode Commands 7-66

Contents

xvi

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

User-Defined Interface Tables 7-67

Print Commands (t=0) 7-68

Escape Print Commands (t=1) 7-69

Shift Print Commands (t=2) 7-70

Status Responses and Auto-Transmit Commands (t=3) 7-71

Protocol Commands (t=4) 7-72

Communication Protocol Characters 7-73

Printer Functional Boundaries 7-74

Appendix

4100 Printer Specifications A-3

Dimensions (no options installed) A-3

Electrical Requirements A-3

Printing Method A-3

Printing Speed A-3

Printhead A-3

Media Specifications A-4

Ribbon Specifications A-4

Cutter Specifications A-4

Environment A-4

Communications A-5

Fonts and Graphics A-5

Character Sets A-5

Bar Code Symbologies A-5

Factory Defaults A-6

Extended Character Sets A-7

International Character Sets A-9

ASCII Translation Table A-11

A

xvii

Helvitica condensed 9 pt italic

Code 39 18 pt

G

I

Configuration Parameters Upload A-12

4100 Printer Options A-13

Present Sensor/Self-Strip A-13

Memory Expansion A-13

Cutter and Tray A-13

Ribbon Save A-14

Glossary

Index

Contents

xviii

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

xix

Helvitica condensed 9 pt italic

Code 39 18 pt

Before You Begin

This section introduces you to standard warranty provisions, safety

precautions, warnings and cautions, document formatting conventions, and

sources of additional product information.

Warranty Information

To receive a copy of the standard warranty provision for this product, contact

your local Intermec sales organization. In the U.S. call (800) 755-5505, and in

Canada call (800) 688-7043. Otherwise, refer to the Worldwide Sales & Service

list shipped with this manual for the address and telephone number of your

Intermec sales organization.

Safety Summary

Your safety is extremely important. Read and follow all warnings and cautions

in this book before handling and operating Intermec equipment. You can be

seriously injured, and equipment and data can be damaged if you do not

follow the safety warnings and cautions.

Do Not Repair or Adjust Alone Do not repair or adjust energized equipment

alone under any circumstances. Someone capable of providing first aid must

always be present for your safety.

First Aid Always obtain first aid or medical attention immediately after an

injury. Never neglect an injury, no matter how slight it seems.

Resuscitation Begin resuscitation immediately if someone is injured and stops

breathing. Any delay could result in death. To work on or near high voltage,

you should be familiar with approved industrial first aid methods.

Energized Equipment Never work on energized equipment unless authorized

by a responsible authority. Energized electrical equipment is dangerous.

Electrical shock from energized eqiupment can cause death. If you must

perform authorized emergency work on energized equipment, be sure that you

comply strictly with approved safety regulations.

Before You Begin

xx

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

Warnings and Cautions

The warnings and cautions in this manual use the following format.

Warning

A warning warns you of an operating procedure, practice, condition, or

statement that must be strictly observed to avoid death or serious injury to the

persons working on the equipment.

Avertissement

Un avertissement vous alerte d'une procédure de fonctionnement, d'une

méthode, d'un état ou d'apport qui doit être strictement respecté pour éviter

l'occurrence de mort ou de blissures graves aux personnes manupulant

l'équipement.

Caution

A caution alerts you to an operating procedure, practice, condition, or

statement that must be strictly observed to prevent equipment damage or

destruction, or corruption or loss of data.

Conseil

Une précaution vous avertit d'une procédure de fonctionnement, d'une méthode,

d'un état ou d'un rapport qui doit être strictement respecté pour empêcher

l'endommagement ou la destruction de l'équipement, ou l'altération ou la perte

de données.

WARNING

CAUTION

La pagina sta caricando ...

Intermec EasyCoder 4100 Manuale utente

Intermec EasyCoder 4100 Manuale utente

in altre lingue

Documenti correlati

Altri documenti