Panasonic UF 8200 - Panafax - Multifunction Manuale utente

Marca: Panasonic

Modello: UF 8200 - Panafax - Multifunction

Categoria: Fax

Tipo: Manuale utente

Questo manuale è adatto anche per

UF-7200

ENGLISH

UF-8200

UF-7200

Operating Instructions

Facsimile Transceiver

Model No.

Before operating this machine, please carefully read this manual,

and keep this documentation in a safe place for future reference.

(For Basic Operations)

Before operating this machine, please carefully read this manual,

and keep this documentation in a safe place for future reference.

English

ENGLISH

Operating Instruction

The following Operating Instruction manuals are included with this machine. Please refer to the appropriate

manual and keep all manuals for future reference. If you lose the manual, contact the authorized Panasonic

dealer.

 Functions and Options

The functions listed below come standard on some models, and optional on others.

Accessories Operating Instructions (For Basic Operations)

This manual contains essential information for setting up

the machine and performing basic operations.

Operating Instructions CD (For Advanced Operations)

Contains manuals with detailed information for Copy,

Facsimile/Internet Fax, Scan/Email functions, Function

Parameters.

Document Management System CD

Contains the Panasonic Document Management System

Application software, and manuals with detailed information

for the Print function, and Panasonic Document

Management System Application software.

Functions UF-8200 UF-7200

Internet Fax Function

Standard Option

Network Scanner Function

Standard Option

2nd Paper Feed Module

Option Option

Dual G3 Communication Port

Option Option

Add-on SD Memory Card,

SD Memory Card (add-on)

Option Option

Telephone Handset Kit

Option Option

SD Logo is a trademark. SDHC Logo is a trademark.

Operating Instruction

ENGLISH

The following notations are used throughout this manual.

How to Read This Manual

Setting Your

Machine

Continued on the next page...

Programming Auto Dialer

Your machine has 2 types of Auto Dialers. The default dialer can be selected by changing the setting of Fax

Parameter No.119 (QWERTY KEYBOARD).

When the setting is set to:

"1:One-Touch": You can manually select the desired One-Touch Key, ABBR. Dialing and the Program Key.

"2:Quick Name Search": You can select the station by searching the Station Name, and the Program Name.

1234

ATTENTION

• The required Six (6) Basic Internet Parameters must be set when setting Email Address. (See page 132)

• Up to 580 stations, plus additional 420 with the optional SD Memory Card installed. (See page 186)

NOTE

1. Use to enter a space between the numbers to make it easier to read.

2. Use or to move the cursor beyond the incorrect character, press then re-enter the new character.

3. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,

press (represented by a"/"). The dialing method will be changed from Pulse to Tone after dialing the digit "/".

4. When using Address Book Dialing, you cannot use ABBR. Number Dialing.

Programming Address Book

To change the input mode (between enter Email Address and

Telephone Number), press .

Enter the Telephone Number using the Number Pad (up to 36 digits)

or the Email Address using the QWERTY Keyboard (up to 60

characters), then press .

Ex:335 or admin@pana

Enter the Station Name using the QWERTY Keyboard (up to 15

characters), then press .

FUNCTION (1-9)

ENTER NO. OR

ADDRESS BOOK (1-3)

ENTER NO. OR

ADD STATION

ENTER TEL. NO.

ENTER NAME

335

ENTER NAME

admin@pana

ADD STATION

ENTER TEL. NO.

ADD STATION

NTER EMAIL ADDRESS

ADD STATION

ENTER EMAIL ADDRESS

Indicates items that need to be registered in

advance.

Indicates additional information on operations or

features.

Indicates messages shown on the LCD display.

Keys with a pointing finger indicate keys you need

to press.

Ex: Press the Function Key.

Indicates keys on the Control Panel.

The shape is different from the actual keys on the

machine.

The functions of some of the keys are marked in

parentheses.

For details about the keys on the Control Panel,

refer to Control Panel. (See page 16)

Indicates pressing keys sequentially.

Ex: Press 7, 2, the Set Key in sequence.

ATTENTION

NOTE

Sample

ENGLISH

Table of Contents

Operating Instruction........................................................................................................ 2

 How to Read This Manual ................................................................................................................. 3

Table of Contents............................................................................................................. 4

Safety Information.......................................................................................................... 5

Precaution........................................................................................................................ 9

Security Suggestions for Key Operators.......................................................................... 13

Main Unit and Accessories............................................................................................... 14

External View ...................................................................................................................15

Control Panel.................................................................................................................... 16

Unpacking ........................................................................................................................ 19

 Installing Your Machine ..................................................................................................................... 19

 Remove All Shipping Tapes and All Packing Materials..................................................................... 20

 Load Paper........................................................................................................................................ 21

 Install the Toner Cartridge................................................................................................................. 23

Installing Your Machine.................................................................................................... 25

Setting the Dialing Method (Tone or Pulse) ..................................................................... 26

Adjusting the Volume ....................................................................................................... 27

 Setting the Monitor Volume ............................................................................................................... 27

 Setting the Ringer Volume................................................................................................................. 28

User Parameters (For Facsimile)..................................................................................... 29

 Setting the User Parameters ............................................................................................................. 29

Setting Your Machine....................................................................................................... 31

 Programming Auto Dialer .................................................................................................................. 31

Placing Documents (Facsimile/Internet Fax).................................................................... 32

 How to Place Documents .................................................................................................................. 32

 Scanning Area................................................................................................................................... 32

 Document Size .................................................................................................................................. 32

Sending Documents......................................................................................................... 33

 Manual Number Dialing..................................................................................................................... 33

 Quick Name Search Dialing............................................................................................................... 34

What is Internet Fax?....................................................................................................... 35

 Using the Internet Fax Feature.......................................................................................................... 36

Replacing Consumables .................................................................................................. 38

 Adding Paper (Paper Trays: Tray-1 and Tray-2)............................................................................... 38

 Replacing the Toner Cartridge........................................................................................................... 40

Problem Solving............................................................................................................... 44

 If You Have Any of These Problems.................................................................................................. 44

 User(U)/Jam(J) Error Codes.............................................................................................................. 46

 Removing a Misfed Paper (Paper Feed/Paper Transport)................................................................ 47

 Removing a Misfed Paper (Inside the Machine)................................................................................ 49

 Removing a Misfed Paper (ADF)....................................................................................................... 51

 Information Code............................................................................................................................... 52

FCC Notice....................................................................................................................... 56

 FCC Notice for Users in USA ............................................................................................................ 56

 Notice to Users in Canada................................................................................................................. 58

IMPORTANT INFORMATION.......................................................................................... 61

ENGLISH

Safety Information

To prevent severe injury and loss of life, read this section carefully before using your machine to ensure

proper and safe operation of your machine.

 This section explains the graphic symbols used in this manual.

 This section also explains the graphic symbols used in this manual.

For Your Safety

Denotes a potential hazard that could result in serious injury, or death.

Denotes hazards that could result in minor injury, or damage to the machine.

These symbols are used to alert operators to a specific operating procedure that must not be

performed.

These symbols are used to alert operators to a specific operating procedure that must be

emphasized in order to operate the machine safely.

This symbol is used to alert operators to a heated surface that may cause burns and

requires close attention.

Power and Ground

Connection Cautions

Ensure that the plug connection is free of

dust. In a damp environment, a

contaminated connector can draw a

significant amount of current that can

generate heat and eventually cause fire

over an extended period of time.

Always use the power cord provided with

your machine.

If you use a cord with an unspecified

current rating, the machine or plug may

emit smoke or become hot to the touch

externally.

Do not attempt to repair, pull, bend, chafe

or otherwise damage the power cord. Do

not place a heavy object on the cord. A

damaged cord can cause fire or electric

shocks.

Never touch a power cord with wet hands.

Danger of electric shock exists.

When disconnecting the machine, grasp

the plug instead of the cord. Pulling on a

cord forcibly can damage it and cause fire

or electric shock.

If the power cord is broken or insulated

wires are exposed, contact your

authorized Panasonic dealer for a

replacement. Using a damaged cord can

cause fire or electric shocks.

Stop operation immediately if your

machine produces smoke, excessive

heat, unusual noise, or smell, or if water is

spilt onto the machine. These conditions

can cause fire. Immediately unplug the

machine, and contact your authorized

Panasonic dealer.

Do not disconnect or reconnect the power

cord from the machine while it is on.

Disconnecting a live connector can

deform the plug and cause fire.

WARNING

CAUTION

WARNING

Safety Information

When the machine is not used over an

extended period of time, unplug it. If an

unused machine is left connected to a

power source for a long period, degraded

insulation can cause electric shocks,

current leakage or fire.

Be sure to unplug the machine before

accessing the interior of the machine for

cleaning, maintenance or fault clearance.

Access to a live machine's interior can

cause electric shock.

Once a month, unplug the machine and

check the power cord for the following. If

you notice any unusual condition, contact

your authorized Panasonic dealer.

zThe power cord is plugged firmly into

the receptacle.

zThe plug is not excessively heated,

rusted, or bent.

zThe plug and receptacle are free of

dust.

zThe cord is not cracked or frayed.

Operating Safeguards

Do not touch areas where these caution

labels are attached to the surface may be

very hot, and cause severe burns.

Do not place any liquid container such as

a vase or coffee cup on the machine. Spilt

water can cause fire or shock hazard.

Do not place any metal parts such as

staples or clips on the machine. If metal

and flammable parts get into the machine,

they can short-circuit internal

components, and cause fire or electric

shocks.

If debris (metal or liquid) gets into the

machine, unplug the machine. Contact

your authorized Panasonic dealer.

Operating a debris contaminated machine

can cause fire or electric shock.

Never open or remove machine covers

that are secured with screws unless

specifically instructed in the "Operating

Instructions". A high-voltage component

can cause electric shocks.

Do not try to alter the machine

configuration or modify any parts. An

unauthorized modification can cause

smoke or fire.

Consumable Safeguards

Never dispose of toner or a toner

cartridge into an open flame. It can cause

an explosion, burns, and/or injuries.

Keep SD Memory Card/verification stamp

out of the reach of children. If an SD

Memory Card/stamp is swallowed

accidentally, get medical treatment

immediately.

Safety Information

ENGLISH

Others

 The machine has a built-in circuit for protection against lightning-induced surge current. If lightning

strikes in your neighborhood, maintain ample distance from the machine and do not touch the

machine until the lightning has stopped.

Installation and Relocation

Cautions

Do not place the machine near heaters or

volatile, flammable, or combustible

materials such as curtains that may catch

fire.

Do not place the machine in a hot, humid,

dusty or poorly ventilated environment.

Prolonged exposure to these adverse

conditions can cause fire or electric

shocks.

When moving the machine, be sure to

unplug the power cord from the outlet. If

the machine is moved with the power cord

attached, it can cause damage to the cord

which could result in fire or electric shock.

Place the machine on a level and sturdy

surface that can withstand a weight of

50.7lb (23kg). If tilted, the machine may

tip-over and cause injuries.

When relocating the machine, contact

your authorized Panasonic dealer.

Operating Safeguards

Do not place a magnet near the safety

switch of the machine. A magnet can

activate the machine accidentally,

resulting in injuries.

Do not use a highly flammable spray or

solvent near the machine. It can cause

fire.

Do not use conductive paper, e.g. folding

paper, carbonic paper and coated paper.

When a paper jam occurs, they can cause

a short circuit and fire.

Never touch a labelled area found on or

near the heat roller. You can get burnt. If a

sheet of paper is wrapped around the heat

roller, do not try to remove it yourself to

avoid injuries or burns. Disconnect the

power cord from the machine immediately,

and contact your authorized Panasonic

dealer.

Keep the room ventilated when using the

machine for an extended period of time to

minimize the ozone density in the air.

Pull out paper trays slowly to prevent

injuries.

When removing jammed paper, make

sure that no pieces of torn paper are left in

the machine. A piece of paper remaining

in the machine can cause fire. If a sheet of

paper is wrapped around the heat roller, or

when clearing a jammed paper that is

difficult or impossible to see, do not try to

remove it by yourself. Doing so can cause

injuries or burns. Disconnect the power

cord from the machine immediately, and

contact your authorized Panasonic dealer.

Consumable Safeguards

Never heat the drum cartridge, or scratch

its surface. A heated or scratched drum

can be hazardous to your health.

CAUTION

Safety Information

 If you notice flickering or distorted images or noises on your audio-visual units, your machine may

be causing radio interference. Disconnect the power cord from the machine and if the interference

disappears, the machine is the cause of the radio interference.

Perform the following procedure until the interference is corrected.

• Move the machine and the TV and/or radio away from each other.

• Reposition or reorient the machine and the TV and/or radio.

• Unplug the machine, TV and/or radio, and replug them into outlets that operate on different circuits.

• Reorient the TV and/or radio antennas and cables until the interference stops. For an outdoor antenna,

ask your local electrician for support.

• Use a coaxial cable antenna.

ENGLISH

Precaution

For Your Safety

 The maximum power consumption is 1000 W.

A properly wired (grounded), dedicated, 15A, 120V AC outlet is required. Do not use an extension cord.

The power cord on this machine must be used to disconnect the main power.

Please ensure that the machine is installed near a wall outlet and is easily accessible.

Supplies

 Store the Toner Cartridge and paper in cool areas with low humidity.

• Panasonic recommends using high quality 16 - 24 lb paper, using an inferior paper may cause excessive

paper curl, requiring you to empty out the Output Tray more often to avoid paper jams.

• When clearing a paper jam or other fault, follow the appropriate procedure given in this Operating

Instructions.

• For optimum performance, it is recommended that only Panasonic Brand supplies are used in the

machine.

• Certain types of transparency film may not be compatible and may damage your machine.

Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.

(Panasonic has tested "3M CG3300" transparency film and found it to be compatible.)

 Use of other than genuine Panasonic supplies can damage the printer. Be sure to use only genuine

Panasonic Toner Cartridge (UG-5570) designed for optimum performance.

Average yield for the UG-5570 is approximately 10,000 pages (3% coverage).

Note: Average yield is based on 3% coverage of the printable area with repetitive printing of 10 pages (Letter/

A4 size, single side printing, default density). The yield of a Toner Cartridge varies depending on the

coverage, temperature, humidity, media, etc. Therefore, the average yield cannot be guaranteed.

Continuously printing 10% coverage of printable area will reduce the yield of the Toner Cartridge to

about half as compared to 3% coverage printing. The maximum yield of the Toner Cartridge will not

exceed 11,500 pages.

 Dispose of Toner Cartridge and OPC Drum Unit(s) according to your local regulations.

Installation

 The machine should not be installed in areas with the following conditions:

• Extremely high or low temperature and humidity.

Ambient conditions:

Temperature: 50 - 86 °F

Relative humidity: 30 - 80 %

Illegal Copies

It is unlawful to make copies of certain documents.

Copying certain documents may be illegal in your country. Penalties of fines and/or imprisonment may be

imposed on those found guilty. The following are examples of items that may be illegal to copy in your

country.

• Currency

• Bank notes and checks

• Bank and government bonds and securities

• Passports and identification cards

• Where temperature and humidity can change rapidly, causing condensation.

• Direct exposure to sunlight.

• In areas of high dust concentration.

• In areas with chemical fume concentration.

• With unstable or uneven conditions (floors, etc.).

• Directly in the air conditioning flow.

• In areas of poor ventilation.

• In areas with extreme vibration.

Precaution

• Copyright material or trademarks without the consent of the owner

• Postage stamps and other negotiable instruments

This list is not inclusive and no liability is assumed for either its completeness or accuracy.

In case of doubt, contact your legal counsel.

Notice:

Install your machine near a supervised area to prevent illegal copies from being made.

Ventilation

 The machine should be installed in a well-ventilated area to minimize the ozone density in the air.

Handling

 Do not disconnect the power cord from the machine or open the Right Cover during copying/

printing.

 Energy Saver Mode Notice

• When using the Printer Function (USB Local and Network Connections), we recommend that you leave

the Energy Saver Mode in the initial factory default setting (Sleep mode).

 Key Operator ID Code

• The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes

require the Key Operator ID Code.

 Dept. (DEPARTMENT) Code

 Number of Copies

The maximum number of copies is up to 999 (3 digit with keypad). During the copy mode, if you input 4-8

digit numbers, they will be interpreted as being a phone number and displayed on the LCD, then the

machine will switch to the Fax mode.

 Auto Reset Timer

As the initial setting for Auto Reset Time is 1 minute, selected operation mode returns to default operation

mode (Fax) after 1 minute, if you wish to change this Auto Reset Time, set to Fax Parameter No.121 (AUTO

RESET TIME). For more details for Fax Parameter, refer to the Operating Instructions (For Advanced

Operations) on the provided CD-ROM.

For Key Operator: When setting up this machine, please consult with your authorized Panasonic dealer,

and decide on the Key Operator ID Code together, then record it and keep it in a safe

place for future reference.

When the Department Counter function is set up, the Dept. (Department) Code

input screen is displayed on the LCD Display. A registered Department Code (1 to

8-digit) is required to gain access to each secured function, or the secured Fax/

Scanner function(s) cannot be used. Please consult with the Key Operator

regarding the Department Code(s) for the desired function.

1 to 8-digit

Procedures:

(1) Input a registered department code (1 to 8-digit).

(2) Press the SET or START Key.

INPUT DEPT CODE

********

Precaution

ENGLISH

 Laser Safety

 Caution Label

LASER SAFETY

This machine employs a laser. Only qualified service personnel should attempt to service this device

due to possible eye injury.

Caution

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

Manufacturer’s Name

and Address

Factory ID

Precaution

Denotes hazards that could result in minor injury or damage to the machine.

• TO REDUCE THE RISK OF SHOCK OR FIRE, USE ONLY NO. 26 AWG OR LARGER TELEPHONE

LINE CABLE.

• DISCONNECT ALL POWER TO THE MACHINE BEFORE COVER(S) ARE REMOVED. REPLACE THE

COVER(S) BEFORE THE MACHINE IS RE-ENERGIZED.

When using your telephone equipment, basic safety precautions should always be followed to reduce the

risk of fire, electric shock and injury to persons, including the following:

• DO NOT USE THIS PRODUCT NEAR WATER, FOR EXAMPLE, NEAR A BATH TUB, WASH BOWL,

KITCHEN SINK OR LAUNDRY TUB, IN A WET BASEMENT OR NEAR A SWIMMING POOL.

• AVOID USING A TELEPHONE (OTHER THAN A CORDLESS TYPE) DURING AN ELECTRICAL

STORM. THERE MAY BE A REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTNING.

• DO NOT USE THE TELEPHONE TO REPORT A GAS LEAK IN THE VICINITY OF THE LEAK.

SAVE THESE INSTRUCTIONS.

CAUTION

IMPORTANT SAFETY INSTRUCTION

As an

NERGY

TAR Partner, Panasonic has determined that this product

meets the

NERGY

TAR guidelines for energy efficiency.

This voluntary program specifies certain energy consumption and usage

standards. This product will automatically "power down" after a specified

period of non-use. The use of this

NERGY

TAR compliant profuct will reduce

energy consumption and ultimately benefit the environment.

The default functions can be adjusted depending on your office requirements.

Please ask your Authorized Panasonic dealer for more details.

ENGLISH

Security Suggestions for Key Operators

To keep your machine’s highly-sensitive document data

secure, the designated Key Operators are instructed to

perform the recommended security measures described

below for the initial machine installation, network

connection, network configuration, setup of security

functions, and replacement and disposal of the

machine.

1. Key Operators are required to verify the identity of the

manufacturer’s service technician, or of an affiliated

company’s staff, or marketing company, by requesting

their ID Card.

Do not give the device information by phone or Email.

2. Always connect through a Firewall when installing

your device on a network that is connected to the

Internet. When connecting this device to a client PC or a

server, we recommend configuring your network

environment with a switching hub to prevent your device

from being wiretapped.

3. A Key Operator ID Code is essential to maintaining

the security of the device. Key Operators are required to

change the ID Code from the initial setting, and keep the

ID Code confidential and in a safe place. To change the

initial Key Operator ID Code, refer to the Operating

Instructions (For Advanced Operations) on the provided

CD-ROM and set up by pressing

and selecting [KEY OPERATOR ID CODE].

4. To prevent illicit use by unauthorized personnel,

perform the following for ID/password settings.

1)Use the maximum number of digits.

2)Use a variety of the accepted character types.

3)Change the ID and password periodically.

Make sure that the setting screen can only be seen by

the Key Operator when setting/changing various ID and

passwords. Keep this information confidential.

5. The documents stored in the machine should be

printed immediately. Upon printing, the document data

is deleted, thus preventing unauthorized re-printing by

a third party.

6. When finished, be sure to press the Stop Key and

return to the standby screen. Also, do not reset Auto

Reset Time settings.

7. When disposing of SD cards, destroy the card or

use wiping software to completely delete the data.

Data on SD cards are your responsibility. To delete

data on SD cards, contact your local Panasonic

Authorized Dealer.

8. Scanned (text and images), received and set/

registered information (addresses) are your

responsibility. If the device malfunctions and the data

are deleted, it cannot be recovered and is not covered

in the warranty.

9. Incorrect settings may leak settings or impede use

of this device. Check the details carefully when

performing settings.

10.On occasion, the clock may need adjustment.

(lunar inequality:

±1 minute)

*The security settings on this equipment are restricted

and require the input of an 8-digit Key Operator ID

Code to set, or change them. The initial ID Code

setting is 00000000 (8-digit). The ID Code can be set

arbitrarily.

The Key Operator plays a critical part in maintaining

and controlling the security of the device and in

prevention of its unauthorized access, therefore, it is of

utmost importance that you understand the content

described in the Operating Instructions and that you

follow the suggestions herein.

ENGLISH

Main Unit and Accessories

Unpack the carton and check that you have all the illustrated accessories.

Machine

Telephone Line Cable

Operating Instructions

Toner Cartridge

Power Cord

Recording Paper Tray

CD-ROM

Directory Sheet Holder

ENGLISH

External View

NOTE

1. For more details, refer to the Printing the Directory Sheet in the Operating Instructions (For Advanced Operations) of pro-

vided booklet.

ADF (Automatic Document Feeder)

Insert the Directory Sheet Holder. (see Note 1)

Control Panel

Toner Cartridge

Jam Cover

Right Cover

Paper Tray (Tray-1)

2nd Paper Tray (Tray-2) (optional)

Sub Document Tray

Recording Paper Tray

ENGLISH

Control Panel

No. Icon Contents No. Icon Contents

 Print Key

Used for Printer function.

 Scan/file Key

Used for optional Network Scanner

Function.

(UF-7200: Available if the optional

Internet Fax/Email/Network

Scanner Module (UE-404093) is

installed.)

 Email Key

Used to select the EMAIL mode.

(UF-7200: Available if the optional

Internet Fax/Email/Network

Scanner Module (UE-404093) is

installed.)

 Email Report Key

Used to send the transmission

result notification by Email.

(UF-8200 only)

 Energy Saver Key

Used to switch the machine to

energy saving mode.

 Stamp Key

Used to turn the verification stamp

ON or OFF.

Lights when the verification stamp is

set to ON.

(Refer to the Operating Instructions

(For Advanced Operations) on the

provided CD-ROM)

 Duplex Key

Used to scan the document(s) on

both sides of the paper.

 Contrast Key

To adjust the Exposure manually.

(Refer to the Operating Instructions

(For Advanced Operations) on the

provided CD-ROM)

 Resolution Key

Used to set STANDARD, FINE, S-

FINE, 600 dpi or HALFTONE

(FINE, S-FINE, 600 dpi).

(Refer to the Operating Instructions

(For Advanced Operations) on the

provided CD-ROM)

 Clear Key

Clears the number or character on

the LCD display.

Go back to the previous LCD

screen and function as Back Space

key.

 Function Key

Used to start or select the function

and subfunctions.

 Set Key

Used to set operations.

5 6

10 11

202122

24 1926

1 2

5 6

7 8

11 12

Control Panel

ENGLISH

 Cursor Keys

• Adjust the Monitor and Ringer volume.

• Move the cursor while entering numbers and characters.

• Search the station name for Quick Name Search and Directory Search Dialing.

• Confirm the entered station for multi-station communication.

• Select functions.

• Confirm the current communication modes (Ex: Page Number, ID, Dialed Telephone Number or

Email Address, File Number) when the machine is ON LINE.

To select the zoom (Copy) ratio, etc.

Use to select original size, etc.

 Original Size Key

Used to select the original size manually.

 Paper Tray Key

Selects the paper tray.

 Redial/Pause Key

Used to enter a pause when

programming or dialing a telephone

number, or to redial the last dialed

number. (Refer to the Operating

Instructions (For Advanced

Operations) on the provided CD-

ROM)

 Abbr Dial Key

Used to start ABBR. Dialing. (Refer

to the Operating Instructions (For

Advanced Operations) on the

provided CD-ROM)

 Number Pad

Used for manual dialing, recording

phone numbers, and numerical

entries.

 Stop Key

Press to abort the current operation

and reset selected mode(s) (Email/

Copy/Scanner Functions) and

return to the Facsimile Function.

 Copy Key

Used for Copy function.

 Start Key

Press this key to start activation.

 Monitor Key

Used to start On-Hook Dialing.

 Flash/Sub-addr Key

Used to enter the Sub-Address or

to access some features of your

PBX.

 Lower Key

Used to switch either upper or

lower row of the One-Touch Key.

(Refer to the Operating Instructions

(For Advanced Operations) on the

provided CD-ROM)

 Active LED (GREEN)

Flashes:

When machine is active.

Lights:

When the received fax message is

in memory.

No. Icon Contents No. Icon Contents

14 15

16 17

18 19

20 21

22 23

Control Panel

 Status LED (RED)

Lights/Flashes when trouble

occurs.

Lights:

The machine detected a trouble

status,

• No paper in the selected tray or

toner has run out.

• Machine detected trouble, such as

paper misfed or jammed.

Flashes:

The machine detected an alarm

status,

• No paper in the Tray. (Tray not

selected)

• Toner is getting low, etc.

 Print Data LED (GREEN)

Flashes:

When receiving printing data.

Lights:

While printing.

 QWERTY Keyboard (Character Keyboard)

• Used to input the characters.

• Used for One-Touch Keys.

Used to enter a symbol for the LOGO, Character ID,

Station Name and for the Email Address. Use or

to select the desired symbol(s).

No. Icon Contents No. Icon Contents

2526

LTR

[LTR 1]

ZOOM:100% COPIES:001

e f

Original Size

Copy Size

Select the zoom (Copy) ratio with the Cursor Keys ( / ).

Scanned data will be rotated.

Paper Size in Paper

Tray

Zoom Ratio

Number of Copies

LCD Display (Copy Function)

ENGLISH

Unpacking

Installing Your Machine

To set up your machine, follow the instructions on the

page provided for each section.

ATTENTION

• Do not plug the main unit's AC Power Cord until

instructed to do so.

Important

1. Unpack the carton and visually check the condition of the

machine and make sure no missing accessories or any

shipping damage before installation. (See page 14)

2. Remove all Shipping Tapes and all Packing Materials.

(See page 20)

3. Load Paper. (See page 21)

4. Install the Toner Cartridge. (See page 23)

5. Connect all Cables and plug the Power Cord. (See page

25)

Note: When moving the machine, do not lift

the machine by grasping parts other

than those specified herein. Doing so

can cause injury.

Note:

When lifting the Main Unit,

grasp by both cavity handles as

illustrated (Right and Left Side).

Do not lift the machine by the

Paper T

ray as it may cause

damage and/or bodily injury.

Unpacking

Remove All Shipping Tapes and All Packing Materials

1 Remove all shipping tapes and all packing

materials.

2 Pull out the tray until it stops.

3 Remove the screw, and fix the screw on the

tray as illustrated below.

4 Insert the tray into the machine until it stops.

5 Install the Recording Paper Tray.

La pagina sta caricando ...

Panasonic UF 8200 - Panafax - Multifunction Manuale utente

Marca: Panasonic

Modello: UF 8200 - Panafax - Multifunction

Categoria: Fax

Tipo: Manuale utente

Questo manuale è adatto anche per

UF-7200

Scarica il pdf

rapporto

in altre lingue

English: Panasonic UF 8200 - Panafax - Multifunction User manual

Panasonic UF 8200 - Panafax - Multifunction Manuale utente

Questo manuale è adatto anche per

Panasonic UF 8200 - Panafax - Multifunction Manuale utente

in altre lingue

Documenti correlati

Altri documenti