Panasonic DP-2000 Manuale utente

English

Operating Instructions (For Internet Fax)

Digital Copier

Before operating this equipment, please read

these instructions completely and keep these

operating instructions for future reference.

DP-2000

Options

DA-AR250/AS200/DS200/DS210/FG230/FG231/FK200/FK210/FS200/MD200

DA-NE200/PC200/PC210/SM08B/SM16B/SM28B/UC200/XN200/XT200; UE-410047/410048/403171

GETTING TO

KNOW YOUR

MACHINE

INSTALLING

YOUR MACHINE

PROGRAMMING

YOUR MACHINE

BASIC

OPERATIONS

ADVANCED

FEATURES

NETWORK

FEATURES

PRINTOUT

JOURNALS AND

LISTS

PROBLEM

SOLVING

APPENDIX

IMPORTANT INFORMATION

Model No. Serial

Date of Purchase

Dealer

Address

Telephone Number ( ) –

Supplies Telephone Number ( ) –

Service Telephone Number ( ) –

When requesting information, supplies or service, always refer to the model and serial number of your

machine. The model and serial number plate (Main Name Plate) is located on the machine as shown

below. For your convenience, space is provided below to record information you may need in the future for

reference or troubleshooting.

For the total system to work properly via LAN, certain information and additional parameters must be set. Please

contact your network administrator for the required information and connection to the LAN.

User Information

Company Name:

Address:

Dept.:

City: State: Zip Code:

Tel. No.: Fax No.:

Internet Parameters

(See page 26)

IP Address:

Subnet Mask:

SMTP Server Name: or SMTP Server IP Address:

Default Router IP Address:

Email Address:

DNS Server IP Address:

POP Server Name: or POP Server IP Address:

POP User Name:

POP Password:

(for security, do not write it in - but keep it in a safe place)

Host Name:

Model and Serial Number

Copyright

©

2000 by Matsushita Graphic Communication Systems, Inc.

of law. Printed in Japan.

The contents of these Operating Instructions are subject to change

without notice.

3

Table of Contents

Safety Information

..................................................................................................................................... 6

Function Key

.............................................................................................................................................. 9

Control Panel

............................................................................................................................................. 10

Pre Installation Information

...................................................................................................................... 12

■

Setup as SMTP mail server ........................................................................... 13

■

Setup as POP3 Client .................................................................................... 14

Internet Communication Features

........................................................................................................... 17

■

Internet Fax Transmission ............................................................................. 17

■

Internet Mail Reception .................................................................................. 17

■

Inbound Routing ............................................................................................ 18

■

Fax Forward ................................................................................................... 19

■

Network Scanner ........................................................................................... 19

■

Network Printer .............................................................................................. 20

■

Relayed Transmission ................................................................................... 21

Important Information

............................................................................................................................... 22

■

Differences between Internet Fax and Regular Fax ...................................... 22

■

Transmitted Document Confirmation ............................................................. 22

■

DP-2000 Cannot Make a Phone Call via LAN ............................................... 22

■

Dual Port Communication .............................................................................. 22

■

Transmission Resolution ............................................................................... 22

■

Internet Mail Reception .................................................................................. 22

■

Sending Document Size via LAN ................................................................... 23

■

Sending a Document to a PC via LAN ........................................................... 23

■

Internet Relayed Transmission ...................................................................... 23

Connecting the LAN Cables

..................................................................................................................... 24

User Parameters

........................................................................................................................................ 25

■

Setting the User (Internet) Parameters .......................................................... 25

Setting the Internet Parameters

............................................................................................................... 26

■

Setting the User Parameters for the LAN Interface ....................................... 26

Programming or Retrieving Parameters via Email

................................................................................. 27

■

Using Email to Program or Retrieve Parameters ........................................... 27

■

Using a PC to Input the Internet Parameters Remotely ................................. 27

■

To Input the Internet Parameters for the First Time ....................................... 28

■

To Retrieve the Internet Parameters for Backup ........................................... 30

■

To Edit the Retrieved or Backup Internet Parameters File ............................ 32

■

Using a PC to Update the Auto Dialer Remotely ........................................... 35

■

Deleting the Entire Auto Dialer ...................................................................... 36

■

To Program One-Touch/ABBR. No. for the First Time .................................. 37

■

To Retrieve One-Touch/ABBR. No. Data for Backup .................................... 39

■

To Edit the Retrieved or Backup One-Touch/ABBR. No. Data File ............... 41

■

Using Email to Retrieve the Journal .............................................................. 43

Programming Email Address and Telephone Numbers

......................................................................... 45

■

Programming the Auto Dialer ........................................................................ 45

■

Editing or Erasing the Auto Dialing Number / Email Address ........................ 49

Programming Email Address and Telephone Numbers

......................................................................... 52

■

Printing a Directory Sheet .............................................................................. 52

Customizing Your Machine

....................................................................................................................... 53

■

Setting the Fax Parameters ........................................................................... 53

■

Fax Parameter Table .................................................................................... 54

Getting to Know Your Machine

Installing Your Machine

Programming Your Machine

Table of Contents

4

Sending Documents via LAN

................................................................................................................... 61

■ Manual Email Addressing

.............................................................................. 62

■ One-Touch Email Addressing ....................................................................... 64

■ Abbreviated Email Addressing ..................................................................... 65

■ Directory Search Dialing ............................................................................... 66

■ Multi-Station Transmission (Broadcasting) ................................................... 68

■ Selectable Domains ...................................................................................... 70

■ Internet Fax Ledger Size Document Transmission ....................................... 72

■ Returned Email ............................................................................................. 74

■ Using a Mailing List ....................................................................................... 75

Receiving Documents via LAN

................................................................................................................ 76

■ Internet Fax Received on a PC ..................................................................... 76

■ Receiving Email from a POP Server ............................................................. 78

■ Setting the POP Parameters ......................................................................... 78

■ Unattended Reception from the POP Server ................................................ 81

■ Manual Reception from the POP Server ....................................................... 81

Program Keys

............................................................................................................................................ 83

■ Entering an Email Address ............................................................................ 83

■ Entering a Telephone Number ...................................................................... 84

■ Setting for Group Dialing ............................................................................... 85

■ Setting the POP Access Key ......................................................................... 86

■ Using the POP Access Key ........................................................................... 87

■ Changing or Erasing the Program Key Settings ........................................... 88

Sender Selection

....................................................................................................................................... 89

■ General Description ...................................................................................... 89

■ Setting the Sender Selection ......................................................................... 89

■ Sending Document with Sender Selection .................................................... 91

■ Printing the Sender Selection List ................................................................. 92

Subject Line Entry

.................................................................................................................................... 93

■ General Description ...................................................................................... 93

■ Sending Email with Subject Line Entry ......................................................... 93

Inbound Routing

....................................................................................................................................... 95

■ Setting the Routing Parameters .................................................................... 95

■ Entering One-Touch/Abbreviated Dialing Numbers for Inbound Routing ..... 97

Fax Forward

............................................................................................................................................... 99

■ Setting Fax Forward ...................................................................................... 99

Ifax Return Receipt

................................................................................................................................... 100

Network Scanner

....................................................................................................................................... 101

Network Printer

......................................................................................................................................... 102

Relayed Transmission

.............................................................................................................................. 103

■ General Description ...................................................................................... 103

■ Relay Network ............................................................................................... 104

■ Setting up your DP-2000 as an Internet Relay Station ................................. 106

■ Setting Up Your Machine for Relayed Transmission .................................... 107

■ Programming the End Receiving Station into your Auto Dialer ..................... 107

■ Sending Documents via Internet Relay ......................................................... 109

■ To a Location That Has a Pre-programmed Relay Station ........................... 109

■ To a Location That Does Not Have a Pre-programmed Relay Station ......... 111

■ Sending Document(s) from a PC to a G3 Fax Machine ................................ 113

■ Printouts and Reports ................................................................................... 115

Basic Operations

Advanced Features

Network Features

Table of Contents

5

Journals and Lists

.................................................................................................................................... 117

■ Transaction Journal ....................................................................................... 117

■ Communication Journal (COMM. JOURNAL) ............................................... 121

■ One-Touch/Abbreviated and Directory Search List ....................................... 124

■ Program List .................................................................................................. 127

■ FAX Parameter List ....................................................................................... 128

Troubleshooting

........................................................................................................................................ 131

■ Information Codes ......................................................................................... 131

■ Email ABBR Programming Errors ................................................................. 132

■ Error Message Sent to the Sender ................................................................ 132

■ Internet FAX Return Receipt Errors Messages ............................................. 132

Specifications

............................................................................................................................................ 133

Glossary

..................................................................................................................................................... 134

Index

........................................................................................................................................................... 138

Printout Journals and Lists

Problem Solving

Appendix

6

Getting to Know Your Machine

Safety Information

denotes a potential hazard that could result in serious injury or death.

WARNING

!

• TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF

MOISTURE.

• TO MINIMIZE THE POSSIBILITY OF SHOCK OR DAMAGE TO THE MACHINE, IT MUST BE PROPERLY

GROUNDED.

• THIS PRODUCT COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUB-CHAPTER J.

CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

• WHEN YOU OPERATE THIS EQUIPMENT, THE SOCKET-OUTLET SHOULD BE NEAR THE EQUIPMENT

AND BE EASILY ACCESSIBLE.

• MAKE SURE THAT THE MACHINE IS INSTALLED IN A SPACIOUS OR WELL VENTILATED ROOM SO AS

NOT TO INCREASE THE AMOUNT OF OZONE IN THE AIR. SINCE OZONE IS HEAVIER THAN AIR, IT IS

RECOMMENDED THAT AIR AT FLOOR LEVEL BE VENTILATED.

DANGER-Invisible and hazardous laser

radiation when open and interlocks defeated.

AVOID DIRECT EXPOSURE TO BEAM.

ATTENTION-Rayonnement laser invisible

dangereux en cas d'ouverture et

lorsque la sécurité est neutralisée.

EXPOSITION DANGEREUSE AU FAISCEAU.

VORSICHT-Unsichtbare Laserstrahlung.

wenn Abdeckung geöffnet und

Sicherheitsverriegelung überbrückt.

NICHT DEM STRAHL AUSSETZEN.

FBE8998A

GETTING TO KNOW YOUR MACHINE

GETTING TO

KNOW YOUR

MACHINE

7

denotes hazards that could result in minor injury or damage to the machine.

CAUTION

!

• THIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IF BATTERY IS

INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES ACCORDING

TO THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE OFFICIALS.

• TO REDUCE THE RISK OF SHOCK OR FIRE, USE ONLY NO. 26 AWG OR LARGER TELEPHONE LINE

CABLE.

• DISCONNECT ALL POWER TO THE MACHINE BEFORE COVER(S) ARE REMOVED. REPLACE THE

COVER(S) BEFORE THE UNIT IS RE-ENERGIZED.

IMPORTANT SAFETY INSTRUCTIONS

!

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of

fire, electric shock and injury to persons, including the following:

• DO NOT USE THIS PRODUCT NEAR WATER, FOR EXAMPLE, NEAR A BATH TUB, WASH BOWL, KITCHEN

SINK OR LAUNDRY TUB, IN A WET BASEMENT OR NEAR A SWIMMING POOL.

• AVOID USING A TELEPHONE (OTHER THAN A CORDLESS TYPE) DURING AN ELECTRICAL STORM.

THERE MAY BE A REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTNING.

• DO NOT USE THE TELEPHONE TO REPORT A GAS LEAK IN THE VICINITY OF THE LEAK.

• USE ONLY THE POWER CORD AND BATTERIES INDICATED IN THIS MANUAL. DO NOT DISPOSE OF

BATTERIES IN A FIRE, THEY MAY EXPLODE. CHECK WITH LOCAL CODES FOR POSSIBLE SPECIAL

DISPOSAL INSTRUCTIONS.

Safety Information

GETTING TO KNOW YOUR MACHINE

8

denotes hazards that could result in minor injury or damage to the machine.

CAUTION

!

Do not install the machine near heating or an air conditioning unit.

Avoid exposure to direct sunlight.

Install the machine on a flat surface, leave at least 4 inches (10 cm) of

space between the machine and other objects.

Do not block the ventilation openings.

Do not place heavy objects or spill liquids on the machine.

Safety Information

GETTING TO

KNOW YOUR

MACHINE

GETTING TO KNOW YOUR MACHINE

9

Function Key

Any function can be started by first pressing and then enter the function number, or by pressing

or scroll key repeatedly until the desired function appears on the display.

(see Note 1)

NOTE

1. If Fax Parameter is not preset to a Valid position, which enables you to use the function, the display will not show

the function.

FUNCTION

2

1

3

6

7

8

9

Advanced Communication

2 = Confidential Communication

4 = Sub-Address XMT

5 = LAN Relay XMT

Polling

1 = Polling

2 = Polled

Printout

1 = Journal (Print/View)

2 = One-Touch/Abbreviated/

Directory Search List

3 = Program List

4 = Fax Parameter List

5 = Not used

6 = Individual XMT Journal

7 = Directory Sheet

Deferred Communication

1 = XMT

2 = Polling

3 = Advanced Communication

Set Mode

1 = User Parameters

• Date & Time

• Logo

• Character ID

• ID Number (Fax Telephone Number)

2 = One-Touch/Abbreviated Numbers

3 = Program Keys

4 = Fax Parameters

Select Mode

1 = Communication Journal = OFF/ON/INC

2 = Duplex Scan = OFF/ON

3 = Cover Sheet = OFF/ON

4 = Password-XMT = OFF/ON (See Note 1)

5 = RCV to Memory = OFF/ON/PRINT

8 = LEDGER EMAIL XMT

(LEDGER

➝

B4 Reduction)

Edit File Mode

1 = File List (Print/View)

2 = Change Time/Station

3 = Delete File

4 = Print File

5 = Add Document

6 = Retry Incomplete File

GETTING TO KNOW YOUR MACHINE

10

Control Panel

REDIAL/

PAUSE

ABBR

FLASH/

SUB-ADDR

SET

ORIGINAL COPY

SIZE SIZE

MONITOR

RESET

START

123

456

789

0

PQRS

GHI

TUV

JKL

ABC

WXYZ

MNO

DEF

STOP

ON LINE

DATA

2SIDED

COPY

1SIDED

COPY

FAX

PRINTER

MULTI-SIZE FEED

RESOLUTION LINE SELECT

ALARM ACTIVE

CLEAR

EENERGY SAVER

DP-2000

INTERRUPT

FUNCTION

TONE

COPY

SORT

STAPLE

SHIFT

OUTPUT

TRAY

DIRECTORY

SEARCH

PAPER

TRAY

LIGHTER DARKER

ZOOM/VOL

PHOTO

TEXT/

PHOTO

TEXT

INTERNET

• Used to enter a pause when recording or dialing a telephone

number, or to redial the last dialed number.

• Used to separate the Sub-Address from the telephone number

when dialing, or to access some features of your PBX.

• Used to start Abbreviated Dialing. (See page 65)

• Used to start On-Hook Dialing.

• Used to set operations.

• Used to switch the

machine into energy

saving mode.

For more details, see

page 24 of the Operating

Instructions (For Copier.)

• Used to start or select

the function and sub-

functions. These

functions are

explained in detail on

page 9.

• Use this button when

resetting all the

previously set functions.

• Use this button when

correcting entered

numbers or

characters.

• Press this button when

you want to stop the

communication,

registration operation, or

audible tone.

• Press this button to start

fax transmission or

Internet communication

and manual fax reception.

Keypad

• Used for manual number dialing,

recording phone numbers, and

numerical entries.

Tone key

• Used to temporarily change the Fax

dialing method to Tone when Pulse

mode is set.

• Also can be used to enter a period

"." during IP Address programming.

• Used to select the

original size

manually.

GETTING TO KNOW YOUR MACHINE

12

Pre Installation Information

Before setting up the DP-2000 on your network, please read this entire section to be familiar with its functions.

The DP-2000 is able to perform the following when connected to a 10Base-T/100Base-TX Ethernet LAN (local

area network):

• Send paper-based information as an Internet Email.

• Receive and print an Internet Email automatically.

• Forward received G3 fax message or Email automatically to the preprogrammed Email address or regular G3

fax machine (see "Fax Forward" on pages 99).

• Route received G3 fax message automatically to the sender-specified Email address or G3 fax machine using

ITU-T SUB-Address (see "Inbound Routing" on pages 95 to 98).

• Route received G3 fax messages automatically to the preprogrammed Email address or G3 fax machine using

the sender’s fax ID code (see "Inbound Routing" on pages 95 to 98).

• Relay an Internet Email to a G3 fax machine via regular fax transmission (see "Relayed Transmission" on

pages 103 to 116).

• Network scanning and printing.

To utilize the above functions, the DP-2000 needs to be set up properly on your network. Please contact your

network administrator for actual network setup.

Copy the Pre-installation Information form found at the end of this section on page 15, record the MAC

Address on the form and ask your network administrator to complete the remaining information on the form.

The MAC Address of your DP-2000 can be found on the 2nd page of the Fax Parameter List printout (press

). (see Note 1) (see Note 2) (see Note 3) (see Note 4)

The DP-2000 can be set up as either

SMTP mail server

or

POP3 client

. Dependent on the type of setup,

different functions are available as follows.

NOTE

1. To function as SMTP mail server, the DP-2000’s email address must include its unique Host name within your

company domain. This unique Host name must be registered within your network’s DNS (Domain Name System)

server. Example: DP-2000@fax01.panasonic.com

2. Automatically refers to immediate SMTP transfer or immediate POP3 retrieval. Manually refers to manual

retrieval of mail when configured as POP3 client.

3. The DP-2000 will receive, print, forward or relay emails in text message format and TIFF-F image file attachment

only.

4. Dynamic Host Configuration Protocol (DHCP) is not supported.

Function SMTP Server Setup POP3 Client Setup

Sending paper-based information as an Internet Email Yes Yes

Receive and print an Internet Email automatically Yes Yes

Receive and print an Internet Email manually No Yes

Forward received G3 fax message or Email automatically Yes Yes

Route received G3 fax message automatically Yes Yes

Relay an Internet Email to G3 fax machine Yes No

FUNCTION

6 4

SET

GETTING TO KNOW YOUR MACHINE

GETTING TO

KNOW YOUR

MACHINE

13

Setup as SMTP mail server

To install the DP-2000 as SMTP mail server, the following network parameters need to be programmed on your

network and on the DP-2000.

• IP Address of the DNS Server (if not available, see Note)

• IP Address of the DP-2000

• Subnet Mask of the DP-2000

• Name or IP Address of the Default SMTP mail server

• IP Address of the Default Router

• Email Address of the DP-2000 (see Note)

• Host Name

Email Transmission (from the DP-2000 to a PC) (see Note 1)

(see Note 2)

(see Note 3)

Email reception (from a PC to the DP-2000)

NOTE

1. To function as SMTP mail server, the DP-2000’s email address must include its unique Host name within your

company domain. This unique Host name must be registered within your network’s DNS (Domain Name System)

server. Example: DP-2000@fax01.panasonic.com

2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP Server

Name. If the DNS Server is not available, change the Fax Parameter No. 161 (DNS SERVER) to "1:Invalid".

Then the machine will prompt you to enter the IP Address of the SMTP Server.

3. Dynamic Host Configuration Protocol (DHCP) is not supported.

[email protected]

SMTP01.panasonic.com

(SMTP Mail Server)

POP02.panasonic.com

(POP Server)

(Router)

[email protected]

SMTP

POP3

[email protected]

SMTP01.panasonic.com

(SMTP Mail Server)

(Router)

[email protected]

SMTP

Pre Installation Information

GETTING TO KNOW YOUR MACHINE

14

Setup as POP3 Client

To install the DP-2000 as POP3 Client, the following network parameters need to be programmed on your

network.

• IP Address of the DNS Server (if not available, see Note 2)

• IP Address of the DP-2000

• Subnet Mask of the DP-2000

• Name or IP Address of the Default SMTP mail server

• IP Address of the Default Router

• POP Server Name or IP Address

• POP User Account Name

• POP Password

• Email Address of the DP-2000 (see Note 1)

(see Note 1) (see Note 2)

Email transmission (from the DP-2000 to a PC)

Email reception (from a PC to the DP-2000)

NOTE

1. The email address format can be the same as your regular email address. If your email address is

popuser001@panasonic.com, the DP-2000’s email address can be DP-2000@panasonic.com.

2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP and POP

Server Names. If the DNS Server is not available, change the Fax Parameter No. 161 (DNS SERVER) to

"1:Invalid". Then the machine will prompt you to enter the IP Address of the SMTP and POP Servers.

[email protected]

SMTP01.panasonic.com

(SMTP Mail Server)

POP02.panasonic.com

(POP Server)

(Router)

[email protected]

SMTP

POP3

[email protected]

SMTP01.panasonic.com

(SMTP Mail Server)

POP02.panasonic.com

(POP Server)

(Router)

[email protected]

SMTP

POP3

Pre Installation Information

GETTING TO KNOW YOUR MACHINE

GETTING TO

KNOW YOUR

MACHINE

15

For the total system to work properly via LAN, certain information and additional parameters must be set. Please

contact your network administrator for the required information and connection to the LAN.

Important:

Make a copy of this page and ask the Network Administrator to complete the required information. After its

returned, transfer the information to the back side of the front cover for future reference and troubleshooting.

(see Note 1) (see Note 2) (see Note 3) (see Note 4)

User Information

Company Name

Address

Dept.

City State Zip Code

Tel. No. Fax No.

Internet Parameters (See page 26)

(1)

IP Address:

(2)

Subnet Mask:

(3)

*SMTP Server Name:

or

*SMTP Server IP Address:

(4)

Default Router IP Address:

(5)

Email Address:

(6)

DNS Server IP Address:

(7)

POP Server Name:

or

*POP Server IP Address:

(8)

POP User Name:

(9)

POP Password:

(10)

Host Name:

(11) Default Subject:

(12) Default Domain:

(13) Selectable Domains:

1. 6.

2. 7.

3. 8.

4. 9.

5. 10.

(14) Remote Password:

(15) Relay XMT Password:

(16) Manager’s Email Address:

(17) Relay Domains (Domains Authorized for Relay Transmission):

1. 6.

2. 7.

3. 8.

4. 9.

5. 10.

NOTE

1. Items in Bold, depict information obtained from you Network Administrator.

2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP and POP

Server Names (items 3 and 7 above). If the DNS Server is not available, change the Fax Parameter No. 161 (DNS

SERVER) to "1:Invalid". Then the machine will prompt you to enter the IP Address of the SMTP and POP Servers.

3. If required, the MAC Address of the DP-2000 can be obtained from the 2nd page of the Fax Parameter List

printout, by pressing

.

4. Dynamic Host Configuration Protocol (DHCP) is not supported.

FUNCTION

6

4

SET

Pre Installation Information

Continued on the next page...

GETTING TO KNOW YOUR MACHINE

16

Explanation of Contents

(see Note 1)

MAC Address

: MAC Address from the 2nd page of the Fax Parameter List printout (press

).

(1) IP Address : The Internet Protocol (IP) address assigned to your machine.

(2) Subnet Mask : The Subnet Mask number.

(3) SMTP Server Name or SMTP

Server IP Address

: The SMTP Server Name (up to 60 characters). The SMTP Server IP Address.

(4) Default Router IP Address : The Default Router’s IP Address.

(5) Email Address : The email address assigned to your machine. (Up to 60 characters)

(6) DNS Server IP Address : The IP address of the DNS Server.

(7) POP Server Name or POP

Server IP Address

: The POP Server Name. (Up to 60 characters) The POP Server IP Address.

(8) POP User Name : POP User Name. (Up to 40 characters)

(9) POP Password : POP Password. (Up to 10 characters)

(10) Host Name : The name assigned to your DP-2000. (Up to 60 characters)

(11) Default Subject : The information to be added to the Subject Line for all outgoing emails. (Up to

40 characters)

(12) Default Domain : Specify the Domain Name (up to 50 characters) to be added to frequently used

or incomplete outgoing email addresses (i.e. @yourcompany.com).

(13) Selectable Domains : Enter up to 10 Domain Names that can be selected during manual email

addressing. (Up to 30 characters)

(14) Remote Password : Enter a security password (up to 10 characters) to allow Remote Programming

of the Internet Parameters and Auto Dialer or the retrieval of the Journal via

email.

(15) Relay XMT Password : Enter a password to provide network security to your Relay Station (for G3 relay

purposes). (Up to 10 characters)

(16) Manager’s Email Address : Enter you Department Manager’s email address for notification of all Internet

relayed transmissions for supervision and cost control purposes. (Up to 60

characters)

(17) Relay Domain (01 to 10) : Enter up to 10 Domain Names that are authorized to access your Internet Fax

for Relayed Transmission Request. (Up to 30 characters)

Relay Domain, a.k.a. Domain Name in the DX-1000/2000.

NOTE

1. All IP Addresses consist of 4 parts separated by dots (i.e. 165.113.245.2).

FUNCTION

6

4

SET

Pre Installation Information

GETTING TO

KNOW YOUR

MACHINE

GETTING TO KNOW YOUR MACHINE

17

Internet Communication Features

Internet Fax Transmission

The DP-2000 allows you to transmit documents over the Internet to another Internet Fax or a PC. The

document is first scanned and converted into a TIFF-F formatted image file, and then transmitted to the remote

location as an attachment file to an email using MIME encoding.

The email system at the receiving end must support MIME. Otherwise, the attachment file will be detached

and lost.

When you send an email message to someone, the DP-2000 uses Simple Mail Transfer Protocol (SMTP) to

transfer your outgoing mail to your SMTP mail server, which in turn uses SMTP to send your mail to the

Internet.

Internet Mail Reception

The DP-2000 allows you to receive and print a PC transmitted email automatically or manually, depending on

its setup configuration. However, if the received email includes file attachment in a format other than TIFF-F,

such as Word, Excel, Power Point, the DP-2000 prints an error message instead.

Internet

Internet Fax

Transmission

Internet Mail

Reception

LAN LAN

Internet Fax

PC

GETTING TO KNOW YOUR MACHINE

18

Inbound Routing

Using the Inbound Routing feature, the DP-2000 can route documents received from a G3 fax machine to

email address(s) or to Internet Fax machine(s) connected to a LAN as an email, as well as to other G3 fax

machine(s) over the telephone line.

When an incoming Internet Fax, email or a regular fax document is received, the DP-2000, checks for the

following:

1. First, the DP-2000 checks whether a sub-address is included. If it is, it will look for a sub-address match

within its auto dialer and will route the documents to the corresponding stations email address(s) and/or

telephone number(s).

2. If no sub-address is specified, then the DP-2000 tries to match the originating fax machine’s Numeric ID

(TSI) with the TSI routing within its auto dialer and will route the documents to the corresponding stations

email address(s) and/or telephone number(s).

(see Note 1) (see Note 2)

NOTE

1. If the originating fax machine does not support the above sub-address function, sub-address destination(s)

cannot be selected.

2. The DP-2000 will allow you to register the same sub-address number for an email address and a telephone

number.

LAN

PC

Internet Fax

Email

G3 Fax

Fax Reception

Transfer to

a G3 Fax

Internet Fax

Internet Communication Features

GETTING TO KNOW YOUR MACHINE

GETTING TO

KNOW YOUR

MACHINE

19

Fax Forward

The DP-2000 is capable of transferring all received Internet email or regular G3 fax documents to a pre-

programmed G3 fax or a PC destination.

Network Scanner

The DP-2000 can be utilized as a network scanner by simply transmitting an image to a PC as TIFF-F

attachment to an email.

This feature was enhanced with an addition of a new Fax Parameter No. 164 (IFAX XMT HEADER), giving you

a selection of whether to include the header when sending a document to an addressee in the same Domain

as specified in the Default Domain parameter. (See Note 1)

(see Note 1)

NOTE

1. When sending to a Domain other than as specified in the Default Domain parameter, the header will be included

regardless of the selection.

LAN

PC

Internet Fax

Email

G3 Fax

Transfer to a G3 Fax

or

Transfer to a PC

LAN

PC

Internet Fax

PC

Internet Communication Features

GETTING TO KNOW YOUR MACHINE

20

Network Printer

The DP-2000 can be utilized as a network printer by simply sending the documents created on your PC using

various software applications to the DP-2000 via TCP/IP protocol.

There a two parts to setting up the DP-2000 as a network printer. Part 1 requires you to download the software

(printer driver and LPR) from the web site listed below.

The second part requires you to install and configure the software on your PC to work with the DP-2000. (See

the web site for details about the printer driver installation and operation.)

You can download the Panasonic’s printer driver and LPR monitor from any of the following URL addresses:

http://www.panasonic.co.jp/mgcs/internetfax/

http://www.panasonic.com/internetfax

(see Note 1)

NOTE

1. The IP Address, Subnet Mask and Default Router IP Address (TCP/IP Gateway Address) must be programmed

on the DP-2000 to use as a Network Printer.

LAN

Internet Fax

PC

Print

Internet Communication Features

La pagina sta caricando ...

Panasonic DP-2000 Manuale utente

Questo manuale è adatto anche per

Panasonic DP-2000 Manuale utente

in altre lingue

Documenti correlati

Altri documenti