Panasonic CQ-VX100W Manuale utente

Marca: Panasonic

Modello: CQ-VX100W

Tipo: Manuale utente

Questo manuale è adatto anche per

Computer Monitor CQ-VX100W

Model: CQ-VX100W

TILT

CQ-VD5005W

DIMMER

DIM

TUNE/ TRACK

MUTE

MAP

SOURCE

POWER

VOL

PUSH

SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXT

CQ-VX100W

TEXT

In-dash 7"Widescreen Color LCD Monitor/DVD Receiver

7-‰˛ÈÏÓ‚˚È ‡‚ÚÓÏÓ·ËÎ¸Ì˚È ¯ËÓÍÓ˝Í‡ÌÌ˚È ˆ‚ÂÚÌÓÈ Üä-ÏÓÌËÚÓ/DVD-ÂÒË‚Â

CQ-VX100W

English

Safety Information

Warning

Observe the following warnings when using this

unit.

❑

The driver should neither watch the display nor

operate the system while driving.

Watching the display or operating the system will distract

the driver from looking ahead of the vehicle and can cause

accidents. Always stop the vehicle in a safe location and

use the parking brake before watching the display or oper-

ating the system.

❑

Use the proper power supply.

This product is designed for operation with a negative

grounded 12 V DC battery system. Never operate this

product with other battery systems, especially a 24 V DC

battery system.

❑

Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

❑

Do not disassemble or modify the unit.

Do not disassemble, modify the unit or attempt to repair

the product yourself. If the product needs to be repaired,

consult your dealer or an authorized Panasonic Service

Center.

❑

Do not use the unit when it is out of order.

If the unit is out of order (no power, no sound) or in an

abnormal state (has foreign objects in it, is exposed to

water, is smoking, or smells), turn it off immediately and

consult your dealer.

❑

Refer fuse replacement to qualified service per-

sonnel.

When the fuse blows out, eliminate the cause and have it

replaced with the fuse prescribed for this unit by a qualified

service engineer. Incorrect replacement of the fuse may

lead to smoke, fire, and damage to the product.

Observe the following warnings when installing.

❑

Disconnect the lead from the negative (–) battery

terminal before installation.

Wiring and installation with the negative (–) battery termi-

nal connected may cause electrical shock and injury due to

a short circuit.

Some cars equipped with the electrical safety system have

specific procedures of battery terminal disconnection.

FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO

THE UNINTENDED ACTIVATION OF THE ELECTRICAL

SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHI-

CLE AND PERSONAL INJURY OR DEATH.

❑

Never use safety-related components for installa-

tion, grounding, and other such functions.

Do not use safety-related vehicle components (fuel tank,

brake, suspension, steering wheel, pedals, airbag, etc.) for

wiring or fixing the product or its accessories.

❑

Installing the product on the air bag cover or in a

location where it interferes with airbag operation

is prohibited.

❑

Check for piping, gasoline tank, electric wiring,

and other items before installing the product.

If you need to open a hole in the vehicle chassis to attach

or wire the product, first check where the wire harness,

gasoline tank, and electric wiring are located. Then open

the hole from outside if possible.

❑

Never install the product in a location where it inter-

feres with your field of vision.

❑

Never have the power cord branched to supply

other equipment with power.

❑

After installation and wiring, you should check the

normal operation of other electrical equipment.

The continuation of their using in abnormal conditions may

cause fire, electrical shock or a traffic accident.

❑

In the case of installation to an airbag-equipping

car, confirm warnings and cautions of the vehicle

manufacturer before installation.

❑

Make sure the leads do not interfere with driving

or getting in and out of the vehicle.

❑

Insulate all exposed wires to prevent short circuit-

ing.

This pictograph intends to alert you to the pres-

ence of important operating instructions and

installation instructions. Failure to heed the

instructions may result in severe injury or

death.

■

Read the operating instructions for the unit and all other

components of your car audio system carefully before using

the system. They contain instructions about how to use the

system in a safe and effective manner. Panasonic assumes

no responsibility for any problems resulting from failure to

observe the instructions given in this manual.

■

This manual uses pictographs to show you how to use the

product safely and to alert you to potential dangers resulting

from improper connections and operations. The meanings of

the pictographs are explained below. It is important that you

fully understand the meanings of the pictographs in order to

use this manual and the system properly.

Warning

This pictograph intends to alert you to the pres-

ence of important operating instructions and

installation instructions. Failure to heed the

instructions may result in injury or material dam-

age.

Caution

CQ-VX100W

English

Caution

Observe the following cautions when using this

unit.

❑

Keep the sound volume at an appropriate level.

Keep the volume level low enough to be aware of road and

traffic conditions while driving.

❑

Do not insert or allow your hand or fingers to be

caught in the unit.

To prevent injury, do not get your hand or fingers caught in

moving parts or in the disc slot. Especially watch out for

infants.

❑

This unit is designed for use exclusively in auto-

mobiles.

❑

Do not operate the unit for a prolonged period with

the engine turned off.

Operating the audio system for a long period of time with

the engine turned off will drain the battery.

❑

Do not expose the unit to direct sunlight or exces-

sive heat.

Otherwise these will raise the interior temperature of the

unit, and it may lead to smoke, fire, or other damage to the

unit.

❑

Do not use the product where it will be exposed to

water, moisture, or dust.

Exposure of the unit to water, moisture, or dust may lead

to smoke, fire, or other damage to the unit. Make especially

sure that the unit does not get wet in car washes or on

rainy days.

❑

Set the volume level to low enough before the AUX

connection is completed.

Failure to observe this, the loud noise may come out and

damage your speakers and your hearing. Direct connection

of the speaker/headphone output of an external device

without any attenuator may distort sound or damage the

connected external device.

Observe the following cautions when installing.

❑

Refer wiring and installation to qualified service

personnel.

Installation of this unit requires special skills and experi-

ence. For maximum safety, have it installed by your dealer.

Panasonic is not liable for any problems resulting from

your own installation of the unit.

❑

Follow the instructions to install and wire the prod-

uct.

Not following the instructions to properly install and wire

the product could cause an accident or fire.

❑

Take care not to damage the leads.

When wiring, take care not to damage the leads. Prevent

them from getting caught in the vehicle chassis, screws,

and moving parts such as seat rails. Do not scratch, pull,

bend or twist the leads. Do not run them near heat sources

or place heavy objects on them. If leads must be run over

sharp metal edges, protect the leads by winding them with

vinyl tape or similar protection.

❑

Use the designated parts and tools for installation.

Use the supplied or designated parts and appropriate tools

to install the product. The use of parts other than those

supplied or designated may result in internal damage to the

unit. Faulty installation may lead to an accident, a malfunc-

tion or fire.

❑

Do not block the air vent or the cooling plate of the

unit.

Blocking these parts will cause the interior of the unit to

overheat and will result in fire or other damage.

❑

Do not install the product where it is exposed to

strong vibrations or is unstable.

Avoid slanted or strongly curved surfaces for installation. If

the installation is not stable, the unit may fall down while

driving and this can lead to an accident or injury.

❑

Installation Angle

The product should be installed in a horizontal position

with the front end up at a convenient angle, but not more

than 30˚.

The user should bear in mind that in some areas there may

be restrictions on how and where this unit must be

installed. Consult your dealer for further details.

❑

Wear gloves for safety. Make sure that wiring is

completed before installation.

❑

To prevent damage to the unit, do not connect the

power connector until the whole wiring is complet-

ed.

❑

Do not connect more than one speaker to one set

of speaker leads. (except for connecting to a

tweeter)

CAUTION:

• PLEASE FOLLOW THE LAWS AND REGULATIONS OF YOUR STATE, PROVINCE OR COUNTRY FOR WIRING,

INSTALLATION, AND USE OF THIS UNIT AND THE DEVICES TO BE CONNECTED.

CQ-VX100W

English

Safety Information (continued)

Caution

THIS PRODUCT IS A CLASS

LASER PRODUCT.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR BY YOUR-

SELF. REFER SERVICING TO QUALIFIED PERSONNEL.

This system is designed so that you

cannot see moving pictures while

you are driving.

Park your car in a safe place and pull the side

brake (parking brake) lever before watching the

monitor.

A rear monitor (option) displays moving pic-

tures while driving.

Note:

¡Be sure to connect the side brake (parking

brake) connection lead. (

a Installation

Instructions)

CQ-VX100W

English

Notes on Use

Components

Note:

¡The number in parenthesis underneath each accessory

part name is the part number for maintenance and

service.

¡Accessories and their parts numbers are subject to

modification without prior notice due to improvements.

5. Installation Hardware (screws,

cords, etc.)

(

a Installation Instructions)

4. Installation Instructions

Qty.: 1

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

OO-OOOOO

3. System Upgrade Guidebook

Qty.: 1

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

OO-OOOOO

2. Operating Instructions

Qty.: 1

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

OO-OOOOO

1. Main Unit

(LCD monitor/DVD player)

Qty.: 1

TILT

CQ-VD5005W

DIMMER

DIM

TUNE/TRACK

MUTE

MAP

SOURCE

POWER

VOL

PUSH

SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXT

CQ-VX100W

Liquid Crystal Panel

¡Do not cause impact to the liquid crystal panel.

¡Usage temperature range: 0 °C to 40 °C

When the temperature is very cold or very hot, the

image may not appear clearly or may move slowly.

Also, movement of the image may seem to be out of

synchronization or the image quality may decline in

such environments. Note that this is not a malfunction

or problem.

¡In order to protect the liquid crystal panel, keep it out

of direct sunlight while the unit is not in use.

¡Sudden changes in the temperature inside the car such

as those which occur immediately after the car’s air

conditioner or heater has been turned on may cause

the inside of the liquid crystal panel to cloud over due

to water vapor or it may cause condensation (droplets

of water) to form and, as a result, the panel may not

work properly. Do not use the unit while these symp-

toms are in evidence but leave the unit standing for

about and hour, and then resume or start use

Before Reading These Instructions

This operating instruction manual is for 3 models CQ-VX100W2/CQ-VX100W3 and

CQ-VX100W5.

The following table shows the playable region number for each model.

5 (ALL)CQ-VX100W5

3 (ALL)CQ-VX100W3

2 (ALL)CQ-VX100W2

Playable region numberModel

Differences Among 3 Models

Example:

“Before Disc Playback”

(

a page 16)

2 3 5

ALL

CQ-VX100W

Features

Panasonic welcomes you to our constantly growing family of electronic products owners.

We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully

selected components, and assembled by people who are proud of the reputation their work has built for our company.

We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability

we have built into it, you too will be proud to be a member of our family.

■ Simultaneous Multi-Device Connection

(with Expansion Module (hub unit))

You can connect the optional Expansion Module (hub

unit) (CY-EM100N). Connection of the Expansion

Module allows you to simultaneously connect

optional devices mentioned before as well as other

AV devices. For details, refer to the operating instruc-

tions for the Expansion Module.

Connectable devices

¡CD/DVD changer (max. 1)

¡iPod

(max. 2)

¡Hands Free Kit with Audio Streaming featuring

Bluetooth

technology (Bluetooth unit) (max. 1)

¡TV tuner (max. 1)

Note:

¡Market conditions regarding optional devices vary

with countries and regions. For further information,

consult your dealer.

¡If a non-Panasonic product is connected to this unit,

we do not guarantee the operations of the product.

■ Integration of the monitor, FM/AM radio,

DVD Video/Video CD player and

CD/MP3/DivX player

■ Built-in AV Input/Output Terminals

For more convenient connection and setup, all termi-

nals are now provided on the unit itself.

Note:

¡If a non-Panasonic product is connected to this unit,

we do not guarantee the operations of the product.

■ SQ (Sound Quality)

You have 6 preset modes (Flat, Rock, Pop, Vocal,

Jazz, Club). You can customize your setting for these

(except Flat) and save them for instant recall.

SQ3 (3-Band Sound Quality)

Center frequency and level are adjustable in each of 3

bands. This lets you fine-tune sound quality for each

genre to suit car-interior acoustics and your personal

preferences. (

a page 33)

■ GUI (Graphic User Interface)

GUI displays various indications with colorful sym-

bols to enhance visibility, enjoyment, and operability.

■ Disc type auto-detection

The signal auto-detection function of this unit allows

users to be free from selection between PAL and

NTSC before use of your discs. (For output signal,

set . (

page 34)

)

■ Touch Panel Operation

Simply touch the screen lightly to operate virtually all

functions. Easy-to-use menus and icons let you

“touch and choose” what you want, so you can start

using your system from the very first day. That also

means that while you drive, you can concentrate on

the road.

■ DVD–R, DVD–RW Playback

(

page 16, 42 for details)

■ ID code

4-digit ID code for increased security.

Fill in the ID code memo (a page 40).

TV Type

Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are

connected.

■ No device is connected to this unit. a Basic operations are covered only by this book.

■ Optional devices are connected to this unit. a Refer to the “System Upgrade Guidebook” in addition.

English

CQ-VX100W

Contents

¢ Safety Information .......................... 2

¢ Notes on Use ................................................... 5

¢ Before Reading These Instructions .............. 5

¢ Components .................................................... 5

¢ Features ........................................................... 6

¢ Preparation...................................... 8

First time power on, other settings, symbols used in this manual

¢ Name of Controls and Functions ................ 10

¢ Anti-Theft System ......................................... 11

¢ Touch Panel Operation Overview................ 12

¢ General .......................................... 14

Power on/power off, display open/close, source

selection, volume, mute, tilt angle, folding down the

display temporarily

Before Disc Playback

..................... 16

Disc

Player..................................... 18

¢ Notes on MP3/DivX ....................................... 22

¢ Radio.............................................. 24

¢ AV1/AV2 ......................................... 26

¢ Settings ......................................... 28

Setup operation

Basic setting, screen, sound, disc, radio

¢ About DivX VOD Content ............................. 36

¢ Troubleshooting ........................... 37

¢ Maintenance .................................................. 41

¢ Notes on Discs .............................................. 42

¢ Language Code List...................................... 43

¢ Definition of Terms ....................................... 44

¢ Specifications................................................ 45

English 2

êÛÒÒÍËÈ 90

CQ-VX100W

English

Preparation

(basic settings) (

page 30)

clock, ID code, input, memory clear, other

(screen settings) (

page 32)

dimmer, display, aspect

(sound settings) (

page 33)

SQ3, bass/treble, balance/fader

(disc settings) (

page 34)

audio language, subtitle language, menu language, video

setting, audio setting, DivX registration

(radio settings) (

page 35)

FM setup

Note:

Refer to “Settings” (

page 28) for further information

about operations, settings, and others of the menu

screen.

Radio

Disc

Sound

Screen

Basic Setting

You may need to set the following depending on the

devices to be connected.

AV1/AV2 (Camcorder, VCR, etc.)

Adjust . (

page 31)

Input

Other Settings

When the power of this unit is turned on for the first time,

the following screen appears. Perform the settings in

accordance with the specifications of the car on which

this unit is mounted.

First Time Power On

Warning

¡When you connect external devices to this unit, be

sure to connect the side brake connection lead

(

aInstallation Instructions).

: sets to ON if your car has ACC position.

: sets to OFF if your car has no ACC posi-

tion.

default:

Note:

For an ACC-equipped car, select ON. The following

functions are available.

The power is turned on automatically when inserting

a disc or magazine.

selection disables turning on the power of the

main unit through the remote control.

Off

OFF

ACC

IGN

Caution

¡Be sure to select off when your car has no ACC

position in the ignition switch. Failure to do this

could cause the battery to go dead.

Please refer to the separate “System Upgrade

Guidebook” for how to operate this unit when option-

al devices are connected.

CQ-VX100W

English

Pictographs

You can perform some operations of this unit in one or

more methods with the touch panel or remote control.

This book explains such operations in tabular form as fol-

lows. Refer to the following for the pictographs located in

the upper part of each table.

Symbols used in this manual

Disc Marks

The following pictographs are used for the descriptions

of disc operation. (

a page 17-21)

: DVD

: VCD (Video CD)

: CD

: CD-Rs/RWs containing MP3 files

: CD-Rs/RWs or DVD-Rs/RWs containing DivX files

DivX

MP3

VCD

DVD

Compatible types of disc

The discs compatible with the targeted operation.

Compatible

Discs

Compatible

Discs

Compatible

Discs

Disques

compatibles

Compatible

Discs

Compatible

Discs

Compatible

Discs

Discos

compatibles

Compatible

Discs

Operation on the Touch Panel

You can use the touch panel to perform the targeted

operation. If the operation is not executable with the

touch panel, “––” is displayed.

DVD VTR

RADIO

CH-C

END

Operation on the Main Unit

You can use the Main Unit to perform the targeted opera-

tion. If the operation is not executable with the Main Unit,

“––” is displayed.

CQ-VX100W

English

Name of Controls and Functions

TILT

CQ-VD5005W

DIMMER

DIM

TUNE/ TRACK

MUTE

MAP

SOURCE

POWER

VOL

PUSH

SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXT

CQ-VX100W

TILT

CQ-VX100W

DIMMER

DIM

TUNE/ TRACK

MUTE

MAP

SOURCE

POWER

VOL

PUSH

SEL

AV1 IN

OPEN

Disc slot

w [VOL]

(PUSH SEL)

e [MUTE]

t [SOURCE] (POWER)

y [s][d] (TUNE/TRACK)

(Display Closed)

(Display Raised)

r [MAP]

Remote control sensor

!0 [TILT]

o [OPEN] (CLOSE)

!0 [TILT]

u [u]

q [DIM] (DIMMER)

[

MUTE

]

[

MAP

]

[

]

[

TILT

]

¡Adjusts the monitor position.

¡Tilts the monitor forward temporarily.

¡Opens/closes the monitor.

[

OPEN

]

(CLOSE)

¡From line output of external audio/video

device. (a Installation Instructions)

AV1 IN

¡Ejects/reloads a disc.

Note:

¡Do not insert a disc when the eject button

[u] lights because a disc is already

loaded.

¡Selects or searches for a track, file, sta-

tion.

¡Fast forward/fast reverse.

¡Slow playback ([d]).

[

][

]

(TUNE/TRACK)

¡Switches on/off the power.

¡Changes the modes such as sound and

picture.

[SOURCE]

(POWER)

¡Switches navigation mode on and off.

(available in the future)

Note:

¡This button is available only when the

Panasonic Car Navigation System (avail-

able in the future) is connected to the RGB

connector of this unit.

¡Mutes the sound temporarily.

¡Adjusts the sound volume.

¡Adjusts audio settings.

[VOL]

(PUSH SEL)

¡The screen brightness is toggled between

the set level and maximum luminance.

[DIM]

(DIMMER)

i AV1 IN

Display

: This book refers to connections to the Panasonic car navigation system that will come onto the market in the future. Descriptions

regarding the car navigation system are boxed with a dotted line.

CQ-VX100W

English

Anti-Theft System

Caution

¡ Be sure to follow the procedure mentioned above to mount the face plate appropriately. Improper mounting such

as forcible mounting without engaging the concave parts with the convex parts may cause trouble.

¡ Use caution not to damage the detection switch while mounting the face plate. Failure to observe this may cause

trouble.

¡ Use caution not to apply excessive force to the removed face plate when the plate is carried or stored. Failure to

observe this may cause trouble.

¡ This face plate is not waterproof. Do not expose it to water or excessive moisture.

¡ Do not remove the face plate while driving your car.

¡ Do not place the face plate on the dashboard or nearby areas where the temperature rises high.

Face Plate Removal Alarm

This alarm sounds to warn you not to forget to remove

the face plate before leaving your car.

This function is activated when is set to

. (

page 31)

Security Alarm

TILT

CQ-VX100W

DIMMER

DIM

TUNE/TRACK

MUTE

MAP

SOURCE

POWER

VOL

PUSH

SEL

AV1 IN

OPEN

This unit is equipped with a removable face plate.

Removing this face plate makes the unit totally inopera-

ble.

Install the Face Plate

Engage the right and left concave parts (A) on the

lower rear side of the face plate with the convex parts

(B) of the main unit.

w Raise and press the face plate toward the main unit

until a click is heard while engaging (A) with (B).

Removable face plate

Remove the Face Plate

Switch off the power of the unit.

w Hold the top and bottom of the center part of the face

plate and pull it down toward you.

e Pull the face plate toward you.

r Place the face plate into the case and take it with you

when you leave the car.

(

)

(

)

(

)

(

)

Detection switch

CQ-VX100W

English

Touch Panel Operation Overview

The State of Operation Screen

❒ Notes on the Touch Panel

Before operation

¡Clean the surface of the touch panel. (a page 41)

Operation

¡Use only your fingers to operate the touch panel.

¡Do not press the panel forcefully.

¡Do not scratch the panel with fingernails or any

hard objects.

¡Do not use a pen or other sharp implements to

operate the touch panel.

¡Do not bump the front panel.

a Failure to observe the above may damage or

break the glass on the surface of the touch

panel.

Prohibition

Input is not possible

because the user has

attempted to perform

an operation which is

not supported by the

disc contents.

Displays the Source Selection Screen.

Source Button Setup Button

Example: DVD mode

Displays the Setup Screen.

Disc indicator (a page 17)

(Lights when a disc is loaded)

Clock time

(a page 30)

Note

¡The following picture is partly darkened for explanation.

¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.

(Content varies with each source)

Source Selection Screen appears.

Touch desired source button.

Touch to quit.

Note

¡The screen above appears when no external device is

connected to this unit.

Source Selection Screen Setup Screen

Setup Screen appears. Select desired setting.

Setup menu, (a page 28)

Press [SOURCE] to change to desired source.

Screen Button

(a page 32)

(only for video source)

Aspect Button

(a page 32)

(only for video source)

Sound Button (a page 33)

CQ-VX100W

English

Touch .

Note:

Refer to the instructions of each source.

¡ To switch Operation Screen on, touch the center of touch panel. (Touch to cancel)

¡ If no operation takes place for more than 10 seconds when Operation Screen is ON, Operation Screen is turned off.

Switching the Display

Touch .

Audio Source

❒

Video Source

❒

DVD

❒

DivX

Operation Screen List Screen

Touch .

Operation Screen 1 Operation Screen 2

Operation Screen 1 Operation Screen 2 List Screen

Touch . Touch .

Touch .

Operation Screen 1

(folder/file name)

Operation Screen 2

(ID3 tag)

List Screen

❒

MP3

Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are

connected.

TILT

CQ-VX100W

DIMMER

DIM

TUNE/ TRACK

MUTE

MAP

SOURCE

POWER

VOL

PUSH

SEL

AV1 IN

OPEN

MUTE

SOURCE

TILT

OPEN

Operations

CQ-VX100W

English

General

[MUTE]

[OPEN]

[SOURCE] (POWER)

[TILT][VOL]

–

(a page 12)

[SOURCE]

General Operations

DVD VTR

RADIO

CH-C

END

–

[SOURCE

]

Power

ON :

Source selection

Note:

The sources AV1 and

AV2 provide the audio

and video from the

devices connected to

AV1 IN and AV2 IN of

this unit respectively,

and the source Ext. In

provides the audio and

video from the device

connected to EXT

VIDEO IN of this unit via

the expansion module

(CY-EM100N, option).

If there is no external

sources connected,

AV1/AV2 mode can be

set to skip. (

a page

31)

[OPEN]

¡Press once to open. Press again to close.

Display Open/Close

Note:

¡When the display is opened or closed, a loud beep sounds three times.

¡If the unit stops halfway, press [OPEN] again to draw it all the way out.

¡Opening/closing the display can be done when the power is off.

–

[SOURCE

]

Power

OFF :

Preparation: Turn your car’s ignition key to the ACC or ON position.

……

Touch/Press and hold for more than 2 seconds

RADIO (AM/FM)

(a page 24)

DVD (DVD/VCD (Video CD)/CD/MP3/DivX)

(a page 18)

AV1

(a page 26)

AV2

Ext. In

HUB1

HUB2

HUB3

HUB4

(a page 26)

(a System

Upgrade

Guidebook)

Sources connected

to the Expansion

Module

(CY-EM100N)

When the Expansion

Module (CY-EM100N,

option) is connected.

(

a System Upgrade

Guidebook)

CQ-VX100W

English

q Press and hold for more than 2 seconds.

Touch to adjust.

Setting range: 1 to 5

default: 5

Operations

DVD VTR

RADIO

CH-C

END

–

the monitor is opened automatically when turning ON ACC.

the monitor is not opened automatically.

–

[TILT]

To raise the display, press again.

Tilt Angle

Folding Down the

Display Temporarily

[TILT]

Mutes the sound.

To cancel, press again.

[MUTE]

Mute

Note:

¡Vertical angle (TILT) is saved in the memory, so when the display is drawn out next, it

is automatically set at the angle and in the position adjusted before.

¡After adjusting its angle, also adjust the brightness as well. (a page 32)

¡The car model and installation conditions may impose some restrictions on the

adjustment of the monitor's angle.

Note:

¡Even when the unit power is off, you can fold down the display temporarily.

Caution

¡Avoid physical shock to the monitor.

¡Do not place any object on the display, or subject it to undue force.

¡Do not move the display forcibly.

¡The monitor movable range may be limited by the type of car, the position where

the display is mounted, etc.

Warning

¡Do not touch the unit while the display is moving. Inserting hands, fingers or for-

eign objects into the unit can cause injuries and damage to the unit.

General Operations (continued)

Auto

Manual

1 5

default:

Manual

–

q Up

w Down

Volume

Note:

¡The sound level for

each source is

stored in memory.

Setting range: 0 to 40, default: 18

Note:

¡ The volume level can be set independently for each source and each

disc format.

CQ-VX100W

English

Before Disc Playback

Discs that can be Played Back

❒ About DivX

¡DivX files recorded on CD-Rs/RWs and DVD-Rs/RWs

are playable. Refer to “Notes on MP3/DivX” for further

information. (

a page 22)

❒ Symbols used on jackets

(Examples of such symbols include)

: Number of subtitle languages

: Number of audio tracks

: Number of angles

The numbers indicate the number of languages, tracks,

angles, etc., recorded on the disc.

Screen size (H:V aspect ratio)

: 4:3 standard size

: Letterbox (a page 34)

16:9 wide size

: Playback in letterbox format on a standard

screen (4:3).

: Playback in (pan and scan)

(

a page 34) format on a standard screen

(4:3).

Note:

The size of the image that is displayed on the screen

depends on the screen mode (

page 32), and

on the screen size for the content on the disc.

❒ Region Management Information

This product is designed and manufactured to respond to

the Region Management Information that is recorded on

a DVD disc. If the Region number described on the DVD

disc does not correspond to the Region number of this

product, this product does not play the disc.

The Region number for this product is “2” (for CQ-

VX100W2),“3” (for CQ-VX100W3), “5” (for CQ-

VX100W5) or “ALL”.

Aspect

Pan & Scan

PS16

LB16

ALL

3 5

Example:

❒ Notes on DVD-Rs/RWs

¡Do not mix DVD-Video formatted data and other format-

ted data on the same disc.

¡Discs in the video recording (VR) format are

unplayable.

¡Unfinalized discs are unplayable.

¡Use disc-at-once recording for DVD-R DL (double-layer).

¡Some discs are unplayable depending on the disc itself,

device, drive and software that are used for disc recording.

❒ Discs not supported

The following discs are not played back on this product.

¡DVD-Audio ¡DVD-ROM ¡DVD-RAM

¡DVD+R ¡DVD+RW

¡VSD ¡CVD

¡CD-G ¡CD-ROM (except MP3)

¡CD-RW (except MP3/DivX and CD-DA)

¡CD-R (except MP3/DivX and CD-DA)

¡SACD ¡Photo CD ¡CDV

¡Hybrid SACD (except CD-DA)

¡CD-EXTRA (audio-only playback possible)

¡DVDs with a region number other than “2”, “3”, “5”

or “ALL”*

¡Playing back a photo CD disc with this unit could

damage the data that is recorded on the disc.

CD-DA : A general music CD format.

Note:

¡Only discs with logos shown in the “Mark/logo” row of

the table above are playable.

¡About CD-Rs and CD-RWs, refer to “Notes on CD-

Rs/RWs, DVD-Rs/RWs”. (

a page 42)

¡Some copy-protected music CDs are not playable.

¡Even if you play a dts DVD or a dts CD, analog sound can-

not be reproduced.

LPCM (CD-DA*

MP3

❒ Disc Type

TEXT

Recordable

ReWritable

DISC DVD

VCD

(Video CD)

CD CD-R/RW

Mark/logo

Disc Size

12 cm

Video

Format

NTSC / PAL

Audio

Format

LPCM,

MPEG1,

MPEG2,

Dolby

Digital

LPCM

(CD-DA*

MPEG1,

MPEG2

(SVCD)

Region No.

2, 3, 5, ALL*

(IEC62107)

TILT

CQ-VD5005W

DIMMER

DIM

TUNE/ TRACK

MUTE

MAP

SOURCE

POWER

VOL

PUSH

SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXT

CQ-VX100W

English

[u] (eject)

lights.

Disc Insert

¡The mode that supports the disc is selected, and play-

back starts.

When a disc is in the player, change to disc player

mode (CD, MP3, DivX, DVD or VCD (Video CD)) and

playback starts.

Note:

¡Do not insert a disc when the eject button

lights because a disc is already loaded.

¡The power will be turned on automatically when a disc

is loaded.

¡You can play a disc even if the monitor is closed.

¡The sound may be interrupted for a few moments

while the audio format is being identified.

¡The audio format is automatically identified.

(

a page 16)

¡When the menu screen appears, see “Chapter/title

Selection” on page 20.

DVDDVDDVD VCDVCDVCD CDCDCD MP3MP3MP3 DivXDivXDivX CH-C

Disc Eject

Press [u] to stop playback and eject the disc.

(Press

[u] again to reload the disc.)

Note:

¡If you leave a disc in the slot for more than 30 seconds

after its ejection, the disc will be automatically reloaded

after loud beep is energized three times.

¡Due to limitations of certain discs, some DVD and

VCD (Video CD) discs may not operate as described

in this manual. Refer to the disc jacket for further

details.

¡This unit does not support DVD and VCD (Video

CD) karaoke functions.

DVDDVDDVD VCDVCDVCD CDCDCD MP3MP3MP3 DivXDivXDivX CH-C

DVD

DVD VCD

VCD

DivX

DVD

DVD VCD

VCD

CD MP3 DivX CH-C

DVD

DVD VCD

VCD

DivX

■ When a disc is in the player...

Do not insert a disc when the eject button lights

because a disc is already loaded.

Printed side

Disc Insert/Eject

Caution

¡Do not use irregularly shaped discs.

¡Do not insert foreign object into the disc slot.

¡This unit does not support 8-cm disc. In case of

load such a disc, eject and remove the disc from

the slot immediately.

Caution

¡When the disc is inserted or ejected, to prevent disc

scratches never exert any downward force on the

disc.

TILT

CQ-VD5005W

DIMMER

DIM

TUNE/ TRACK

MUTE

MAP

SOURCE

POWER

VOL

PUSH

SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXT

CQ-VX100W

SOURCE

CQ-VX100W

English

Disc Player

Video Mode Display

q Touch

(folder name) to select a folder.

, : scrolls up/down the file list

by 1 page.

, : scrolls up/down the file list

by 1 line.

w Touch (file

name) to play.

DVD VTR

RADIO

CH-C

END

: Folder

: MP3/DivX file

Note:

¡[s] and [d] of the main unit can scroll up and

down the file list by 1 page, respectively, too.

¡It is not possible to display the whole tree and file list

in a folder.

¡The displayed contents on the touch panel vary with

circumstances.

Note:

Touch to change the display. (

page 13)

MP3

Operation Buttons

Audio Mode Display

List

(

Folder/File/Track

)

Selection

Operation Buttons

Source Button

Playing time

Operation Buttons

Title/text scroll

Folder selection

Current track

(Example: MP3 mode)

[SOURCE]

[s] [d]

Touch

“

Source Button

”

Source Button

Touch (Disc)

on the Source

Selection Screen.

Source Selection

Press

[SOURCE]

to change to the

desired mode.

To switch Operation Screen ON, touch the center of

touch panel.

VCD (Video CD)

Source Button Playing time

Operation Buttons

DivX

Source Button Playing time

DVD

Repeat/random indicator

Source Button

Playing time

Operation Buttons

Title/text scroll

Source Button

Playing time

CQ-VX100W

English

……

Touch/Press and hold

Touch panel symbols will change to indicate these current mode. ,

Operations

DVD VTR

RADIO

CH-C

END

DivX

DivXMP3

MP3

VCD

DVD

Compatible

Discs

Compatible

Discs

Compatible

Discs

Disques

compatibles

Compatible

Discs

Compatible

Discs

Compatible

Discs

Discos

compatibles

Compatible

Discs

DVD

Track/file Selection

Fast Forward/

Fast Reverse

Note:

¡When playing a DVD, there are cases where it is not possible to return to

the start of a chapter that spans 2 titles.

DivX

DivXMP3

MP3

VCD

DVD

DivX

VCD

DVD

The speeds of fast forward and fast reverse change incrementally in 4 steps

every time the corresponding button is pressed.

Folder Selection

Title/text Scroll

DivX

DivXMP3

MP3

DivX

DivXMP3

MP3

Stop

DivX

DivXMP3

MP3

VCD

DVD

To resume playback, touch .

Pause

DivX

DivXMP3

MP3

VCD

DVD

Slow Playback

DivX

VCD

DVD

Repeat Play

DivX

DivXMP3

MP3

VCD

DVD

Repeat Play within the

Current Folder

DivX

DivXMP3

MP3

To resume playback, touch again or touch

Note:

¡Reverse slow playback is not possible.

Scan Play

Random Play

DivX

DivXMP3

MP3

Random Play within the

Current Folder

DivX

DivXMP3

MP3

–

[d]

[

Next track/file

Beginning of the current track/file

Previous track/file (Touch/press twice.)

[s]

[d]

Fast forward

Release to resume playback.

Fast reverse

Release to resume playback.

Next folder

Scrolls the title/text once

Previous folder

[s]

–

Basic Operations

Touch/press and hold in the pause mode.

Playback is at about 1/3 normal speed.

To resume normal playback,

touch .

To cancel, touch again.

To cancel, touch and hold for more than 2 sec-

onds again.

–

To cancel, touch again.–

To cancel, touch and hold again.–

–

CQ-VX100W

English

Disc Player (continued)

To switch Operation Screen ON, touch the center of touch panel.

Note:

If no operation is performed for 8 seconds after you have touched , the operation buttons disappear.

If the title/chapter number is inputted and no operation is performed for 8 seconds, playback will start from the num-

ber of the title/chapter entered.

Operations

DVD VTR

RADIO

CH-C

END

Compatible

Discs

Compatible

Discs

Compatible

Discs

Disques

compatibles

Compatible

Discs

Compatible

Discs

Compatible

Discs

Discos

compatibles

Compatible

Discs

VCD

DVD

Showing menu and

selecting an item

–

q Menu appears.

w Select the desired item. (Touch when

the direction buttons shown at left are not dis-

played.)

e Determine the setting.

Returns to the previous display.

q Toggles “Chapter number input

mode”, “Title number input mode”

and “Number input mode”.

w Input desired number.

e Playback starts.

Starting Playback

from a specific

chapter/title

Note:

For retrying selection during number entry, touch .

Note on VCD:

For VCD, touch

instead of .

Touch the numerical

key to enter a number

directly

VCD

DVD

–

Toggles the position of the buttons on the screen

between upper and lower.

Chapter/title Selection

On-Screen Direct Operation (Only for DVD)

Some DVDs allow you to operate the DVD menu by

touching the screen.

La pagina sta caricando ...

Panasonic CQ-VX100W Manuale utente

Marca: Panasonic

Modello: CQ-VX100W

Tipo: Manuale utente

Questo manuale è adatto anche per

Computer Monitor CQ-VX100W

Scarica il pdf

rapporto

in altre lingue

English: Panasonic CQ-VX100W User manual

Panasonic CQ-VX100W Manuale utente

Questo manuale è adatto anche per

Panasonic CQ-VX100W Manuale utente

in altre lingue

Documenti correlati

Altri documenti