Rockford Fosgate ELEMENT READY M0-65 Manuale utente

Marca
Rockford Fosgate
Modello
ELEMENT READY M0-65
Categoria
Altoparlanti della soundbar
Tipo
Manuale utente
600 South Rockford Drive • Tempe, Arizona 85281 United States
Direct: (480) 967-3565 • Toll Free: (800) 669-9899
rockfordfosgate.com
101819 1230-73020-01-B Printed In China
M0-65
M0-65B
Installation & Operation
Installation assistance available at:
ELEMENT READY™ SPEAKERS
2
Dear Customer,
Congratulations on your purchase of the world’s finest brand of audio
products. At Rockford Fosgate we are fanatics about musical reproduc-
tion at its best, and we are pleased you chose our product. Through
years of engineering expertise, hand crasmanship and critical testing
procedures, we have created a wide range of products that reproduce
music with all the clarity and richness you deserve.
For maximum performance we recommend you have your new Rock-
ford Fosgate product installed by an Authorized Rockford Fosgate
Dealer. Please read your warranty and retain your receipt and original
carton for possible future use.
Great product and competent installations are only a piece of the
puzzle when it comes to your system. Make sure that your installer is
using 100% authentic installation accessories from Rockford Fosgate in
your installation. Rockford Fosgate has everything from RCA cables and
speaker wire to power wire and battery connectors. Insist on it! Aer
all, your new system deserves nothing but the best.
To add the finishing touch to your new Rockford Fosgate image, order
your Rockford accessories, which include everything from T-shirts to
hats.
Visit our web site for the latest information on all Rockford products;
www.rockfordfosgate.com
or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all
other countries, call +001-480-967-3565 or FAX +001-480-966-
3983.
Table of Contents
If, aer reading your manual, you still have questions regarding
this product, we recommend that you see your Rockford Fosgate
dealer. If you need further assistance, you can call us direct at
1-800-669-9899. Be sure to have your serial number, model num-
ber and date of purchase available when you call.
Safety
This symbol with “WARNING” is intend-
ed to alert the user to the presence of
important instructions. Failure to heed
the instructions could result in severe
injury or death.
This symbol with “CAUTION” is intend-
ed to alert the user to the presence of
important instructions. Failure to heed
the instructions could result in injury
or unit damage.
• To prevent injury and damage to the unit, please read and
follow the instructions in this manual.
• If you feel unsure about installing this system yourself, have
it installed by a qualified Rockford Fosgate technician.
• Before installation, disconnect the battery negative (-)
terminal to prevent damage to the unit, fire and/or possible
injury.
Introduction
©2019 RockfordCorporation. All Rights Reserved. ROCKFORD FOSGATE, PUNCH
®
and associated logos where applicable are registered trademarks of
Rockford Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Specifications sub-
ject to change without notice.
2 Introduction
3 Specifications
4 Diagrams
Installation Considerations
Mounting
5-6 Additional Languages
French
Spanish
German
Italian
8 Limited Warranty Information
PRACTICE SAFE SOUND
Continuous exposure to sound pressure levels over 100dB may
cause permanent hearing loss. High powered auto sound systems
may produce sound pressure levels well over 130dB. Use common
sense and practice safe sound.
PRATIQUEZ UNE ÉCOUTE SANS RISQUES
Une exposition continue à des niveaux de pression acoustique
upérieurs à 100 dB peut causer une perte d’acuité auditive
permanente. Les systèmes audio de forte puissance pour auto
peuvent produire des niveaux de pression acoustique bien au-delà
de 130 dB. Faites preuve de bon sens et pratiquez une écoute sans
risques
PRACTIQUE EL SONIDO SEGURO
El contacto continuo con niveles de presión de sonido superiores
a 100 dB puede causar la pérdida permanente de la audición. Los
sistemas de sonido de alta potencia para automóviles pueden
producir niveles de presión de sonido superiores a los 130 dB. Aplique
el sentido común y practique el sonido seguro.
PRAKTIZIEREN SIE SICHEREN SOUND
Fortgesetzte Geräuschdruckpegel von über 100 dB können beim
Menschen zu permanentem Hörverlust führen. Leistungsstarke
Autosoundsysteme können Geräuschdruckpegel erzeugen, die weit
über 130 dB liegen. Bitte wenden Sie gesunden Menschenverstand an
und praktizieren Sie sicheren Sound.
OSSERVATE LE REGOLE DEL SUONO SENZA PERICOLI
La costante esposizione a livelli di pressione acustica al di sopra dei
100dB possono causare la perdita permanente dell’udito. I sistemi
audio ad alta potenza possono produrre livelli di pressione acustica
ben superiori ai 130dB. Si consiglia il buon senso e l’osservanza delle
regole del suono senza pericoli
3
Model M0-65
M0-65B
Nominal Diameter - inch
(mm)
6.5
165mm
Description
2-Way
Nominal Impedance
(Ohms)
4Ω
Frequency Response
(Hz)*
40-25kHz
Power Handling - Watts
(RMS/Peak)
65/250
Sensitivity (2.83V/1M)
90.5dB
Grille/Trim Ring
YES (mounted)
Overall Diameterg(A)
7.09
180.1mm
Mounting Screw Angle
(C)
60°
Screw Mounting
Diameter (B)s
6.12
155.5mm
Overall Height (D)
(page 4)
3.54
90mm
Mounting Depth (E)
(page 4)
2.52
63.9mm
Cut-out Diameter (F)
(page 4)
5.38
136.6mm
Grill Height (G)(page 4)
1.03
26.1mm
Specifications
M0-65 & M0-65B
illus.-1.1
illus.-1.1
illus.-1.2
illus.-1.1
illus.-1.2
illus.-1.2
illus.-1.2
illus.-1.2
A
B
C
*Rockford Fosgate determines its rated frequency response range at -6 dB below its nominal sensitivity
at upper and lower extents of a speaker’s output.
4
Diagrams
M0-65 & M0-65B
Contents
• (1) Pair Marine Grade Speakers
• (13) Socket head stainless screws
• (2) Allen/Hex key drill bit adaptor
• (1) 1/8” (.35mm) drill bit
Installation Considerations
Before beginning any installation, follow these simple rules:
1. Be sure to carefully read and understand the instructions
before attempting to install these speakers.
2. For easier assembly, we suggest you run all wires prior to
mounting your speakers in place.
3. Use high quality connectors for a reliable installation and
to minimize signal or power loss.
4. Think before you drill! Be careful not to cut or drill into gas
tanks, fuel lines, brake, hydraulic lines, vacuum lines or
electrical wiring when working on any vehicle. If installation
in a boat, take care not to cut or drill through the main hull.
5. Never run wires underneath the vehicle. Running the wires
inside the vehicle or hull area provides the best protection.
6. Avoid running wires over or through sharp edges. Use
rubber or plastic grommets to protect any wires routed
through metal, especially the firewall.
Mounting
1. Determine where the speakers will be mounted. Ensure an
area large enough for the speaker to mount evenly. Be sure
that the mounting location is deep enough for the speaker
to fit; if mounting in a door, operate all functions (windows,
locks, etc.) through their entire operating range to ensure
there is no obstruction.
2. Refer to the specification chart to determine the proper
diameter hole to cut for your speaker model. Cutting and
mounting templates can be found at www.rockfordfosgate.
com.
3. Mark the locations for the mounting screws. Drill the holes
utilizing the supplied drill bit.
4. Feed the speaker wires through the cutout and connect to
the speaker terminals. Be sure to observe proper polarity
when connecting the wires. The speaker’s positive terminal
is indicated with a “+”.
5. Tighten the screws until the speaker is snug in place to
prevent rattling. Do not over tighten the screws.
VERIFIED WITH KLIPPEL
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained
and certified by Klippel prior to using the three separate Klippel systems to design, develop and test. Rockford Fosgate
has made the investment in Klippel to deliver the best possible speakers and subwoofers to their customers.
illus.-1.2
D
E
F
G
5
Français Español
Considérations Concernant L’installation
Avant de commencer l’installation, suivez les règles ci-dessous:
1. Veillez à bien lire et comprendre les instructions avant
d’essayer d’installer les haut-parleurs.
2. Pour faciliter le montage des haut-parleurs, il est conseillé
d’installer tous les câbles au préalable.
3. Utilisez des connecteurs de haute qualité pour assurer une
installation fiable et réduire au minimum la perte de signal
ou de puissance.
4. Réfléchissez bien avant de percer.Veillez à ne pas couper
ou percer le réservoir d’essence, le câblage électrique
ou les conduites de carburant, de freinage hydraulique
ou de dépression en travaillant sur un véhicule. En cas
d’installation sur un bateau, veillez à ne pas couper ou
percer la coque principale.
5. Ne jamais faire passer de fils sous le véhicule. Leur
installation à l’intérieur du véhicule ou de la coque assure
la meilleure protection.
6. Évitez de faire passer des fils sur des bords tranchants ou
dans des orifices à arêtes vives. Utilisez des bagues en
caoutchouc ou en plastique pour protéger les fils traversant
une plaque de métal, notamment le tablier.Emplacements
De Montage
Montage
1. Déterminez l’emplacement des haut-parleurs.Veillez à ce que
la surface plane soit assez grande pour assurer un contact
uniforme du haut-parleur.Vérifiez que l’emplacement est
assez profond pour le haut-parleur ; en cas de montage dans
une portière, actionnez toutes les commandes (fenêtres,
serrures, etc.) jusqu’aux extrémités de leurs courses pour
vous assurer qu’il n’y a pas d’obstruction.
2. Consultez le tableau des caractéristiques pour déterminer
le diamètre de l’orifice à découper pour votre modèle de
haut-parleur. Le gabarit fourni donne aussi le bon diamètre
de découpe.Les gabarits de coupe et de montage sont
disponibles sur la page www.rockfordfosgate.com/rech.
3. Marquez les emplacements pour les vis de montage. Percez
les trous en utilisant le foret fourni.
4. Faites passer les fils de haut-parleur à travers l’orifice
découpé et branchez-les aux bornes du haut-parleur.Veillez
à bien respecter la polarité lors du branchement. La borne
positive du haut-parleur est indiquée par un « + ».
5. Serrez les vis jusqu’à ce que le haut-parleur soit bien ajusté,
de façon à prévenir tout cliquetis, mais évitez tout serrage
excessif..
Consideraciones para la instalación
Antes de comenzar cualquier instalación, siga estas simples
normas:
1. 1. Asegúrese de leer cuidadosamente y de entender las
instrucciones antes de tratar de instalar estos altavoces.
2. Para facilitar el montaje, sugerimos que tienda todos los
cables antes de montar sus altavoces en su sitio.
3. Utilice conectores de alta calidad para tener una instalación
confiable y para reducir al mínimo las pérdidas de señal o
de potencia.
4. ¡Piense siempre antes de perforar! Tenga cuidado de no
cortar ni perforar en tanques de combustible, tuberías
de combustible, frenos o hidráulicas, tuberías de vacío
o cableado eléctrico al trabajar en un vehículo. Si la
instalación se hace en un bote, tenga cuidado de no cortar
ni perforar a través del casco principal.
5. Nunca tienda cables abajo del vehículo.Tender los cables
adentro del vehículo o casco proporciona la mejor
protección.
6. Evite tender cables arriba o a través de bordes filosos. Use
arandelas aislantes de caucho para proteger los cables
tendidos a través de metal, especialmente la mampara
cortafuegos.Montage
Montaje
1. Determine adónde se montará los altavoces.Asegúrese de
que haya un área suficientemente grande para montar
de manera plana el altavoz.Asegúrese de que el lugar de
montaje sea suficientemente profundo para que quepa
el altavoz, si se monta en una puerta, accione todas las
funciones (ventanas, cerradura, etc.) en toda su gama
de funcionamiento para asegurarse de que no haya
obstrucciones.
2. Consulte la tabla de especificaciones para determinar
cuales son los diámetros correctos para el agujero a cortar
para su modelo de altavoz. La plantilla proporcionada
también le da la medida correcta del recorte.Se puede
hallar las plantillas para el corte y el montaje en www.
rockfordfosgate.com/rech.
3. Marque las ubicaciones para los tornillos de montaje.
Taladre los agujeros utilizando la broca suministrada.
4. Tienda los cables del altavoz a través del recorte y conecte
a los terminales del altavoz.Asegúrese de usar la polaridad
correcta al conectar los cables. El terminal positivo del
altavoz está identificado con un símbolo “+”.
5. Apriete los tornillos hasta que el altavoz esté ajustado en
su sitio para evitar vibraciones. No apriete demasiado los
tornillos.
6
Deutsch
Einbauüberlegungen
Befolgen Sie vor dem Einbau diese einfachen Regeln:
1. 1. Lesen Sie die Anleitung sorgfältig, bevor Sie versuchen
diese Lautsprecher einzubauen.
2. Um die Montage zu erleichtern, empfehlen wir alle Kabel
vor der Befestigung Ihrer Lautsprecher zu verlegen.
3. Verwenden Sie nur Qualitätsstecker, um einen zuverlässigen
Einbau zu gewährleisten und Signal- und Stromverlust zu
minimieren.
4. Denken Sie nach, bevor Sie bohren! Achten Sie darauf, nicht
in den Benzintank, die Benzin-, Brems- oder hydraulischen
Leitungen,Vakuumleitungen oder Elektrokabel zu
schneiden oder zu bohren,wenn Sie am Fahrzeug arbeiten.
Achten Sie beim Einbau in einem Boot darauf, nicht durch
den Bootsrumpf zu schneiden oder zu bohren.
5. Verlegen Sie Kabel nie unter dem Fahrzeug. Die Kabel im
Fahrzeug oder Bootsrumpf zu verlegen, bietet den besten
Schutz.
6. Vermeiden Sie es, Kabel über scharfe Kanten zu verlegen.
Verwenden Sie Gummi- oder Plastikringe, um Kabel zu
schützen, die durch Metall verlegt werden (besonders die
Feuerwand).
Befestigung
1. Entscheiden,wo die Lautsprecher befestigt werden
sollen. Gewährleisten, dass der Platz ausreicht, um den
Lautsprecher gleichmäßig zu befestigen. Gewährleisten,
dass die Befestigungsstelle ausreichende Tiefe für
den Lautsprecher hat; beim Einbau in einer Türe alle
Funktionen (Fenster, Schloss usw.) in ihrem ganzen Bereich
ausprobieren um zu gewährleisten, dass keine Blockierung
eintritt.
2. Die Tabelle in den Technischen Daten gibt den richtigen
Lochdurchmesser für Ihr Lautsprechermodell zum
Ausschneiden an. Die beiliegende Schablone zeigt
ebenfalls die richtige Ausschneidegröße an.Schneide-
und Befestigungsschablonen finden Sie unter www.
rockfordfosgate.com/rech.
3. Markieren Sie die Stellen für die Befestigungsschrauben.
Bohren Sie die Löcher mit dem mitgelieferten Bohrer.
4. Die Lautsprecherkabel durch das Loch führen und an den
Lautsprecherausgängen anschließen. Beim Anschließen
der Kabel die ordnungsgemäße Polarität beachten. Der
positive Anschluss des Lautsprechers ist mit einem „+“
markiert.
5. Die Schrauben anziehen, bis der Lautsprecher eng an
seinem Platz anliegt, um Klappern zu verhindern. Die
Schrauben nicht zu fest anziehen..
Italiano
Considerazioni sull’installazione
Prima di iniziare qualsiasi operazione d’installazione, vi consi-
gliamo di seguire queste semplici regole:
1. Assicuratevi di aver letto tutte le istruzioni con cura e
di averle capite prima di eettuare qualsiasi tentativo
d’installazione neiconfronti dell’unità.
2. Per facilitare il montaggio, vi suggeriamo di far scorrere tutti
i fili prima di montare la vostra unità nella sua ubicazione.
3. Usate connettori di alta qualità per garantire
un’installazione che dà aidamento e per ridurre al minimo
la perdita di segnali o di potenza.
4. State attenti prima di trapanare! Cercate di non trapanare
e di non incidere i serbatoi della benzina; le condutture del
carburante, dei freni, del sistema idraulico e a depressione;
nonché i fili elettrici quando state lavorando su qualsiasi
veicolo.
5. Non fate mai scorrere i fili sotto il veicolo.Avrete la protezione
migliore faccendo scorrere i fili all’interno del veicolo.
6. Evitate di far scorrere i fili sopra o attraverso delle estremità
ailate. Usate guarnizioni di tenuta in gomma o in plastica
per proteggere qualsiasi filo che passi attraverso del
metallo, soprattutto il parafiamma.
Montaggio
1. Decidete dove montare gli altoparlanti.Assicuratevi
che sia un’area abbastanza grande per poter montare
l’altoparlante a livello e abbastanza profonda per poterlo
collocare comodamente. Se lo montate all’interno di uno
sportello, controllate tutte le funzioni (finestre, serrature,
ecc.), una alla volta, per assicurarvi che non ci siano
ostruzioni.
2. Fate riferimento alla tabella delle specifiche per stabilire
il diametro corretto del foro che dovrete praticare per
il modello del vostro altoparlante.Si possono trovare
le sagome per il taglio e il montaggio presso www.
rockfordfosgate.com/rech.
3. Contrassegnare le posizioni delle viti di montaggio.
Praticare i fori utilizzando la punta da trapano fornita.
4. Passare i cavi del diusore tramite l’apertura e collegarli
ai terminali.Verificare che la polarità sia corretta quando
si collegano i cavi. Il terminale positivo del diusore è
identificato dal “+”.
5. Per evitare rumore dovuto a vibrazioni serrare le viti finché
il diusore non sia saldamente in posizione. Non serrare le
viti in modo eccessivo..
7
Notes
8
Rockford Corporation oers a limited warranty on Rockford Fosgate products on the following terms:
Length of Warranty
POWER Amplifiers – 2 Years
BMW® Direct Fit Speakers – 2 Years
PUNCH® & PRIME® Amplifiers – 1 Year
Speakers, Signal Processors, Accessories and Capacitors – 1 Year
All marine, motorcycle, motorsport products - 2 Years
Any Factory Refurbished Product – 90 Days (receipt required)
What is Covered
This warranty applies only to Rockford Fosgate products sold to consumers by authorized Rockford Fosgate dealers in the United
States of America. Products purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered
only by that country’s Distributor and not by Rockford Corporation.
Who is Covered
This warranty covers only the original purchaser of Rockford product purchased from an authorized Rockford Fosgate dealer in the
United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name,
dealer name, product purchased and date of purchase.
Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at
Rockford’s discretion.
What is Not Covered
1. Damage caused by accident, abuse, improper installation, operations, the, water (on non-Element Ready™ products).
2. Any cost or expense related to the removal or reinstallation of product.
3. Service performed by anyone other than Rockford or an authorized Rockford Fosgate service center.
4. Any product which has had the serial number defaced, altered, or removed.
5. Subsequent damage to other components.
6. Any product purchased outside the U.S.
7. Any product not purchased from an authorized Rockford Fosgate dealer. Refer to rockfordfosgate.com dealer locator for more
detail.
Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express
warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply.
No person is authorized to assume for Rockford Fosgate any other liability in connection with the sale of the product.
How to Obtain Service
Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any prod-
uct to Rockford Fosgate. You are responsible for shipment of product to Rockford.
EU Warranty
This product meets the current EU warranty requirements, see your Authorized dealer for details.
Warranty
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Rockford Fosgate ELEMENT READY M0-65 Manuale utente

Marca
Rockford Fosgate
Modello
ELEMENT READY M0-65
Categoria
Altoparlanti della soundbar
Tipo
Manuale utente
Scarica il pdf
rapporto

in altre lingue

Documenti correlati

Altri documenti