Sony DCR-TRV730 Istruzioni per l'uso

Categoria
Videocamere
Tipo
Istruzioni per l'uso

Questo manuale è adatto anche per

SERIES
TM
©2001 Sony Corporation
Model No. DCR-TRV Model No. AC-
Serial No. Serial No.
Operating Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
3-066-521-12 (1)
DCR-TRV730/TRV828/TRV830
Digital
Video Camera
Recorder
DCR-TRV830
2
Welcome!
Congratulations on your purchase of this Sony Digital Handycam camcorder. With your
Digital Handycam, you can capture life’s precious moments with superior picture and sound
quality. Your Digital Handycam is loaded with advanced features, but at the same time it is
very easy to use. You will soon be producing home video that you can enjoy for years to
come.
WARNING
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
For customers in the U.S.A.
If you have any questions about this product,
you may call:
Sony Customer Information Center 1-800-222-
SONY (7669)
The number below is for the FCC related
matters only.
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-TRV730, DCR-
TRV828, DCR-TRV830
Responsible Party: Sony Electronics lnc.
Address: 680 Kinderkamack
Road, Oradell, NJ
07649 U.S.A
Telephone No.: 201-930-6972
This device complies with Part15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Never expose the battery pack to temperatures
above 60°C (140°F) such as in a car parked in
the sun or under direct sunlight.
For the customers in the
U.S.A. and CANADA
DISPOSAL OF LITHIUM ION
BATTERY.
LITHIUM ION BATTERY.
DISPOSE OF PROPERLY.
You can return your unwanted lithium ion
batteries to your nearest Sony Service Center
or Factory Service Center.
Note: In some areas the disposal of lithium
ion batteries in household or business
trash may be prohibited.
For the Sony Service Center nearest you call
1-800-222-SONY (United States only)
For the Sony Factory Service Center nearest
you call 416-499-SONY (Canada only)
Caution:Do not handle damaged or leaking
lithium ion battery.
3
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
“Memory Stick”
This device complies with Part15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Note:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
The shielded interface cable supplied with this
equipment must be used with this equipment
in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC
Rules.
For customers in CANADA
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
“Memory Stick”
This Class B digital apparatus complies with
Canadian ICES-003.
4
Main Features
Taking moving or still images, and playing them back
Recording a picture (p. 19)
Recording a still image on a tape (p. 33)
Playing back a tape (p. 27)
Recording still images or moving pictures on “Memory Stick” (p. 97, 104)
Viewing a still image or a moving picture recorded on “Memory Stick” (p. 117, 120)
Capturing images on your computer
Using with analog video unit and your computer (p. 73)
Viewing still images or moving pictures recorded on “Memory Stick” using USB cable
(p. 122)
Other uses
Functions to adjust exposure in the recording mode
• Back light (p. 23)
• NightShot/Super NightShot (p. 23)
• PROGRAM AE (p. 43)
• Adjusting the exposure manually (p. 45)
Functions to give images more impact
• Digital zoom [MENU] (p. 78) The default setting is set to OFF. (To zoom greater than
18×, select the digital zoom power in D ZOOM in the menu settings.)
• Digital program editing (p. 62)
• Fader (p. 37)
• Picture effect (p. 39)
• Digital effect (p. 40)
• Title (p. 47, 49)
• MEMORY MIX (p. 110)
Functions to give a natural appearance to your recordings
• END SEARCH/EDITSEARCH/Rec Review (p. 26)
• Manual focus (p. 46)
Functions to use after recording
• Zero set memory (p. 55)
• HiFi SOUND [MENU] (p. 78)
• SUPER LASER LINK (p. 32)
• Tape PB ZOOM (p. 54)/Memory PB ZOOM (p. 129)
Getting started
5
Table of contents
Main Features ................................................... 4
Quick Start Guide................................. 6
Getting started
Using this manual ............................................ 8
Checking supplied accessories..................... 10
Step 1 Preparing the power supply ............ 11
Installing the battery pack..................... 11
Charging the battery pack ..................... 12
Connecting to a wall outlet ................... 16
Step 2 Setting the date and time ................. 17
Step 3 Inserting a cassette ............................ 18
Recording – Basics
Recording a picture........................................ 19
Shooting backlit subjects
– BACK LIGHT ............................... 23
Shooting in the dark
– NightShot/Super NightShot ...... 23
Self-timer recording ............................... 25
Checking the recording – END SEARCH/
EDITSEARCH/Rec Review .................. 26
Playback – Basics
Playing back a tape ........................................ 27
Viewing the recording on TV ....................... 31
Advanced Recording Operations
Recording a still image on a tape
– Tape Photo recording ......................... 33
Using the wide mode .................................... 36
Using the fader function ............................... 37
Using special effects – Picture effect ........... 39
Using special effects – Digital effect ............ 40
Using the PROGRAM AE function ............. 43
Adjusting the exposure manually ............... 45
Focusing manually......................................... 46
Superimposing a title .................................... 47
Making your own titles ................................. 49
Inserting a scene ............................................. 51
Advanced Playback Operations
Playing back a tape with picture effects ..... 52
Playing back a tape with digital effects ...... 53
Enlarging recorded images
– Tape PB ZOOM ................................... 54
Quickly locating a scene using the zero set
memory function .................................... 55
Searching a recording by date
– Date search ........................................... 56
Searching for a photo
– Photo search/Photo scan.................... 57
Editing
Dubbing a tape ............................................... 59
Dubbing only desired scenes
– Digital program editing ...................... 62
Using with analog video unit and your
computer – Signal convert function..... 73
Recording video or TV programs ................ 74
Inserting a scene from a VCR
– Insert Editing........................................ 76
Customizing Your Camcorder
Changing the menu settings......................... 78
“Memory Stick” operations
Using “Memory Stick”–introduction .......... 88
Recording still images on “Memory Stick”
– Memory Photo recording ................... 97
Recording an image from a tape as a still
image ...................................................... 102
Recording moving pictures on “Memory
Stick”s – MPEG movie recording....... 104
Recording moving pictures from a tape ... 106
Superimposing a still image in the “Memory
Stick” on an image
– MEMORY MIX................................... 110
Copying still images from a tape
– Photo save........................................... 115
Viewing a still image
– Memory Photo playback .................. 117
Viewing a moving picture
– MPEG movie playback ..................... 120
Viewing images using your computer...... 122
Copying the image recorded on “Memory
Stick” to tapes ....................................... 127
Enlarging still images recorded on “Memory
Stick”s – Memory PB ZOOM .............. 129
Playing back images in a continuous loop
– SLIDE SHOW ..................................... 131
Preventing accidental erasure
– Image protection................................ 132
Deleting images ............................................ 133
Writing a print mark – PRINT MARK ...... 136
Using the external printer ........................... 137
Troubleshooting
Types of trouble and their solutions ......... 138
Self-diagnosis display.................................. 143
Warning indicators and messages............. 144
Additional Information
Digital8 system, recording and playback
................................................................. 146
About the “InfoLITHIUM” battery pack
................................................................. 148
About i.LINK ................................................ 149
Using your camcorder abroad ................... 151
Maintenance information and precautions
................................................................. 152
Specifications ................................................ 157
Quick Reference
Identifying the parts and controls ............. 159
Index .............................................................. 167
Quick Start Guide
6
Quick Start Guide
This chapter introduces you to the basic features of your
camcorder. See the page in parentheses “( )” for more
information.
Open the DC IN
jack cover.
Connect the plug with
its v mark facing up.
Inserting a cassette (p. 18)
Connecting the power cord (p. 16)
Use the battery pack when using your camcorder outdoors (p. 11).
AC power adaptor (supplied)
1Slide OPEN/EJECT
in the direction of the
arrow and open the
lid.
2Insert the cassette in
a straight line deeply
into the cassette
compartment with
the window facing
out.
Push the middle
portion of the back of
the cassette to insert.
3Close the cassette
compartment by
pressing the
mark on the cassette
compartment.
After the cassette
compartment goes
down completely,
close the lid until it
clicks.
Quick Start Guide
7
PLAY
REW
C
A
M
E
R
A
M
E
M
O
R
Y
V
C
R
O
F
F
(
C
H
G
)
PO
W
ER
Recording a picture (p. 19)
Monitoring the playback picture on the LCD
screen (p. 27)
C
A
M
E
R
A
M
E
M
O
R
Y
V
C
R
O
F
F
(
C
H
G
)
P
O
W
E
R
Viewfinder
When the LCD panel is closed, use the viewfinder placing your
eye against its eyecup.
The picture in the viewfinder is black and white.
3Open the LCD panel
while pressing OPEN.
The picture appears
on the LCD screen.
2Set the POWER
switch to CAMERA
while pressing the
small green button.
4Press START/STOP.
Your camcorder
starts recording. To
stop recording, press
START/STOP button
again.
1Remove the lens cap.
When you purchase your camcorder, the clock setting is set to off. If you want to record the date
and time for a picture, set the clock setting before recording (p. 17).
2Press m to rewind the tape.
3Press N to start playback.
Note
Do not pick up your camcorder by
holding the viewfinder, the LCD
panel, or the battery pack.
1Set the POWER
switch to VCR while
pressing the small
green button.
8
— Getting started —
Using this manual
The instructions in this manual are for the three models listed in the table below. Before
you start reading this manual and operating your camcorder, check the model number
by looking at the bottom of your camcorder. The DCR-TRV830 is the model used for
illustration purposes. Otherwise, the model name is indicated in the illustrations. Any
differences in operation are clearly indicated in the text, for example, “DCR-TRV830
only.”
As you read through this manual, buttons and settings on your camcorder are shown in
capital letters.
e.g. Set the POWER switch to CAMERA.
When you carry out an operation, you can hear a beep sound to indicate that the
operation is being carried out.
Type of difference
DCR- TRV730 TRV828 TRV830
LCD screen 6.2 cm (2.5 type) 8.8 cm (3.5 type) 8.8 cm (3.5 type)
Before using your camcorder
With your digital camcorder, you can use Hi8 /Digital8 video cassettes. Your
camcorder records and plays back pictures in the Digital8 system. Also, your
camcorder plays back tapes recorded in the Hi8 /standard 8 (analog) system.
You, however, cannot use the functions in “Advanced Playback Operations” on page 52
to 58 for playback in the Hi8 /standard 8 system. To enable smooth transition,
we recommend that you do not mix pictures recorded in the Hi8 /standard 8
with the Digital8 system on a tape.
Note on TV color systems
TV color systems differ from country to country. To view your recordings on a TV, you
need an NTSC system-based TV.
Copyright precautions
Television programs, films, video tapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provision of the
copyright laws.
9
Getting started
[a] [b]
[c]
Using this manual
Precautions on camcorder care
Lens and LCD screen/finder (on mounted models only)
The LCD screen and the finder are manufactured using extremely high-precision
technology so over 99.99% of the pixels are operational for effective use.
However, there may be some tiny black points and/or bright points (white, red,
blue or green in color) that constantly appear on the LCD screen and the finder.
These points are normal in the manufacturing process and do not affect the
recording in any way.
Do not let your camcorder get wet. Keep your camcorder away from rain and sea
water. Letting your camcorder get wet may cause your camcorder to malfunction.
Sometimes this malfunction cannot be repaired [a].
Never leave your camcorder exposed to temperatures above 60°C (140°F), such as in a
car parked in the sun or under direct sunlight [b].
Be careful when placing the camera near a window or outdoors. Exposing the LCD
screen, the finder or the lens to direct sunlight for long periods may cause
malfunctions [c].
Do not directly shoot the sun. Doing so might cause your camcorder to malfunction.
Take pictures of the sun in low light conditions such as dusk [d].
[d]
10
Checking supplied accessories
Make sure that the following accessories are supplied with your camcorder.
1 Wireless Remote Commander (1)
(p. 165)
2 AC-L10A/L10B/L10C AC power
adaptor (1), Power cord (1) (p. 12)
3 NP-FM50 battery pack (1) (p. 11, 12)
4 Size AA (R6) battery for Remote
Commander (2) (p. 165)
5 A/V connecting cable (1) (p. 31)
6 Shoulder strap (1) (p. 159)
7 Lens cap (1) (p. 19)
8 USB cable (1) (p. 123)
Contents of the recording cannot be compensated if recording or playback is not
made due to a malfunction of the camcorder, storage media, etc.
12 3
45 6 7
89 0 qa
qs qd qf qg
9 “Memory Stick” (1) (p. 88)
0 CD-ROM (SPVD-004 USB Driver) (1)
(p. 123)
qa Printer (PVP-MSH)* (1) (p. 137)
qs Print paper*
Standard type (10 sheets × 1),
Sticker type/Standard size
(5 sheets × 1),
Sticker type/9 split size (5 sheets × 1)
qd Print cartridge* (1)
qf Head cleaner* (1)
qg Platen roller cleaner* (1)
*DCR-TRV830 only
11
Getting started
Installing the battery pack
We recommend using the battery pack when you use your camcorder outdoors.
(1) Lift up the viewfinder.
(2) Slide the battery pack down until it clicks.
To remove the battery pack
(1) Lift up the viewfinder.
(2) Slide the battery pack out in the direction of the arrow while pressing BATT
(battery) release lever down.
If you install the large capacity battery pack
If you install the NP-FM70/FM90/FM91 battery pack on your camcorder, extend its
viewfinder.
Step 1 Preparing the power supply
BATT (battery)
release lever
1
2
12
Step 1 Preparing the power supply
Charging the battery pack
Use the battery pack after charging it for your camcorder.
Your camcorder operates only with the “InfoLITHIUM” battery pack (M series).
See page 148 for details of “InfoLITHIUM” battery pack.
(1) Open the DC IN jack cover and connect the AC power adaptor supplied with
your camcorder to the DC IN jack with the plug’s v mark facing up.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Set the POWER switch to OFF (CHG). Charging begins. The remaining battery
time is indicated in minutes on the display window.
When the remaining battery indicator changes to u, normal charge is completed. To
fully charge the battery (full charge), leave the battery pack attached after normal
charge is completed until FULL appears on the display window. Fully charging the
battery allows you to use the battery longer than usual.
The number in the illustration of the display window may differ from that on your
camcorder.
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camcorder.
4
1
2
C
A
M
E
R
A
M
E
M
O
R
Y
V
C
R
O
F
F
(
C
H
G
)
POW
ER
13
Getting started
Step 1 Preparing the power supply
Note
Prevent metallic objects from coming into contact with the metal parts of the DC plug of
the AC power adaptor. This may cause a short-circuit, damaging the AC power
adaptor.
When the battery pack is charged fully
The LCD backlight of the display window is turned off.
Remaining battery time indicator
The remaining battery time indicator in the display window roughly indicates the
recording time with the viewfinder.
Until your camcorder calculates the actual remaining battery time
“– – – – min” appears in the display window.
While charging the battery pack, no indicator appears or the indicator flashes in
the display window in the following cases:
The battery pack is not installed correctly.
Something is wrong with the battery pack.
If the power may go off although the battery remaining indicator indicates that
the battery pack has enough power to operate
Charge the battery pack fully again so that the indication on the battery remaining
indicator is correct.
When you use the AC power adaptor
Place the AC power adaptor near a wall outlet. If any trouble occurs with this unit,
disconnect the plug from the wall outlet as soon as possible to cut off the power.
Recommended charging temperature
We recommend charging the battery pack in an ambient temperature of between 10 °C
to 30 °C (50 °F to 86 °F).
What is ”InfoLITHIUM”?
The “InfoLITHIUM” is a lithium ion battery pack which can exchange data such as
battery consumption with compatible electronic equipment. This unit is compatible
with the “InfoLITHIUM” battery pack (M series). Your camcorder operates only with
the “InfoLITHIUM” battery. “InfoLITHIUM” M series battery packs have the
SERIES
TM
mark. “InfoLITHIUM” is a trademark of Sony Corporation.
14
Step 1 Preparing the power supply
Charging time
Battery pack Full charge (Normal charge)
NP-FM50 (supplied) 150 (90)
NP-FM30 145 (85)
NP-FM70 240 (180)
NP-FM90 330 (270)
NP-FM91 360 (300)
The charging time may increase if the battery’s temperature is extremly high or low
because of the ambient temperature.
Approximate number of minutes to charge an empty battery pack at 25 ˚C (77 ˚F)
Recording time
DCR-TRV730
Recording with Recording with
Battery pack the viewfinder the LCD screen
Continuous* Typical** Continuous* Typical**
NP-FM50 (supplied) 120 70 100 55
NP-FM30 75 45 60 35
NP-FM70 255 145 210 120
NP-FM90 390 230 325 185
NP-FM91 455 265 375 215
DCR-TRV828/TRV830
Recording with Recording with
Battery pack the viewfinder the LCD screen
Continuous* Typical** Continuous* Typical**
NP-FM50 (supplied) 120 65 95 55
NP-FM30 75 40 55 30
NP-FM70 255 145 200 115
NP-FM90 390 225 305 180
NP-FM91 455 260 350 205
Approximate number of minutes when you use a fully charged battery
* Approximate continuous recording time at 25°C (77°F). The battery life will be
shorter if you use your camcorder in a cold environment.
** Approximate number of minutes when recording while you repeat recording start/
stop, zooming and turning the power on/off. The actual battery life may be shorter.
15
Getting started
Step 1 Preparing the power supply
Playing time
DCR-TRV730
Battery pack
Playing time Playing time
on LCD screen with LCD closed
NP-FM50 (supplied) 120 155
NP-FM30 75 95
NP-FM70 255 320
NP-FM90 390 490
NP-FM91 455 565
DCR-TRV828/TRV830
Battery pack
Playing time Playing time
on LCD screen with LCD closed
NP-FM50 (supplied) 110 155
NP-FM30 70 95
NP-FM70 240 320
NP-FM90 360 490
NP-FM91 420 565
Approximate number of minutes when you use a fully charged battery
Approximate continuous playing time at 25 °C (77 °F). The battery life will be shorter if
you use your camcorder in a cold environment.
The recording and playing times of a normally charged battery are about 90 % of those
of a fully charged battery.
Note
The table shows the playing time for tapes recorded in the Digital8 system. The
playing time of tapes recorded in the Hi8/standard 8 system is reduced by about 20 %.
16
Connecting to a wall outlet
When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC power adaptor.
(1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN
jack on your camcorder with the plug’s v mark facing up.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
Notes
The AC power adaptor can supply power even if the battery pack is attached to your
camcorder.
The DC IN jack has “source priority”. This means that the battery pack cannot supply
any power if the power cord is connected to the DC IN jack, even when the power
cord is not plugged into a wall outlet.
Using a car battery
Use Sony DC Adaptor/Charger (optional).
Step 1 Preparing the power supply
2, 3
1
17
Getting started
The year changes as follows:
If you do not set the date and time
“--- -- ----” “--:--:--” is recorded on the tape and the “Memory Stick.”
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
12:00 AM stands for midnight.
12:00 PM stands for noon.
Step 2 Setting the date and time
Set the date and time settings when you use your camcorder for the first time.
“CLOCK SET” will be displayed each time that you set the POWER switch to CAMERA
or MEMORY unless you set the date and time settings.
If you do not use your camcorder for about half a year, the date and time settings may
be released (bars may appear) because the built-in rechargeable battery will have been
discharged (p. 154).
First, set the year, then the month, the day, the hour and then the minute.
(1) Set the POWER switch to CAMERA or MEMORY, and then press MENU to
display the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7) Press MENU to make the menu settings disappear.
2
4
1,7
3
6
MENU
CLOCK SET
12 00
AM
[
MENU
]
:
END
SETUP MENU
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
LANGUAGE
D EMO MOD E
SETUP MENU
RETURN
[
MENU
]
:
END
SETUP MENU
12 00
AM
[
MENU
]
:
END
RETURN
SETUP MENU
530
PM
[
MENU
]
:
END
SETUP MENU
5
:30:00
PM
[
MENU
]
:
END
AUTO TV ON
TV INPUT
LTR SIZE
LANGUAGE
D EMO MOD E
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
LANGUAGE
DEMO MODE
RETURN
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
LANGUAGE
DEMO MODE
RETURN
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
LANGUAGE
DEMO MODE
2001
JUL 4
2001
JAN 1
2001
JAN 1
JUL 4
2001
––
:
––
:
––
12 00
2001
JAN 1
1995 T · · · · t 2001 T · · · · t 2079
18
We recommend using Hi8 /Digital8 video cassettes.
(1) Prepare the power supply (p. 11).
(2) Slide OPEN/EJECT in the direction of the arrow and open the lid.
The cassette compartment automatically lifts up and opens.
(3) Insert the cassette in a straight line deeply into the cassette compartment with
the window facing out.
Push the middle portion of the back of the cassette to insert.
(4) Close the cassette compartment by pressing the
mark on the cassette
compartment. The cassette compartment automatically goes down.
(5) After the cassette compartment going down completely, close the lid until it
clicks.
To eject a cassette
Follow the procedure above, and eject the cassette in step 3.
Notes
Do not press the cassette compartment down. Doing so may cause malfunction.
Your camcorder records pictures in the Digital8 system.
• The recording time when you use your camcorder is half of indicated time on Hi8
tape. If you select the LP mode in the menu settings, 3/4 of indicated time on Hi8
tape.
If you use standard 8 tape, be sure to play back the tape on this camcorder. Mosaic
pattern noise may appear when you play back standard 8 tape on other camcorders
(including other DCR-TRV730/TRV828/TRV830).
The cassette compartment may not be closed when you press any part of the lid other
than the mark.
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
Step 3 Inserting a cassette
4
5
2 3 4,5
19
Recording – Basics
— Recording – Basics —
Recording a picture
Your camcorder automatically focuses for you.
(1) Remove the lens cap by pressing both knobs on its sides and attach the lens
cap to the grip strap.
(2) Install the power source and insert a cassette. See “Step 1” to “Step 3” for more
information (p. 11 to 18).
(3) Set the POWER switch to CAMERA while pressing the small green button.
Your camcorder is set to the standby mode.
(4) Open the LCD panel while pressing OPEN. The viewfinder automatically
turns off.
(5) Press START/STOP. Your camcorder starts recording. The REC indicator
appears on the screen. The camera recording lamp located on the front of your
camcorder lights up. To stop recording, press START/STOP again.
The recording lamp lights up in the viewfinder when you record with the
viewfinder.
Notes
Fasten the grip strap firmly.
Do not touch the built-in microphone during recording.
Note on Recording mode
Your camcorder records and plays back in the SP (standard play) mode and in the LP
(long play) mode. Select SP or LP in the menu settings (p. 78). In the LP mode, you can
record 1.5 times as long as in the SP mode. When you record a tape in the LP mode on
your camcorder, we recommend that you play back the tape on your camcorder.
5
3
4
1
2
40min
REC
0:00:01
SP
C
A
M
E
R
A
M
E
M
O
R
Y
V
C
R
O
F
F
(
C
H
G
)
POW
ER
Camera recording
lamp
Microphone
20
Note on LOCK
When you slide LOCK to the right, the POWER switch can no longer be set to
MEMORY accidentally. The LOCK is released as a default setting.
To enable smooth transition
You can make the transition between the last scene you recorded and the next scene
smooth as long as you do not eject the cassette if you turn off your camcorder. When
you change the battery pack, set the POWER switch to OFF (CHG).
If you leave your camcorder in the standby mode for 3 minutes
Your camcorder automatically turns off. This is to save battery power and to prevent
battery and tape wear. To resume the standby mode, set the POWER switch to OFF
(CHG) once, then turn it to CAMERA again.
When you record in the SP and LP modes on one tape or you record some scenes
in the LP mode
The playback picture may be distorted or the time code may not be written properly
between scenes.
Adjusting the LCD screen
The LCD panel moves about 90 degrees to the viewfinder side and about 180 degrees to
the lens side.
If you turn the LCD panel over so that it faces the other way, the indicator appears
on the LCD screen and in the viewfinder (Mirror mode).
When closing the LCD panel, set it vertically until it clicks, and swing it into the
camcorder body.
Note
When using the LCD screen except in the mirror mode, the viewfinder automatically
turns off.
When you use the LCD screen outdoors in direct sunlight
The LCD screen may be difficult to see. If this happens, we recommend that you use the
viewfinder.
When you adjust angles of the LCD panel
Make sure if the LCD panel is opened up to 90 degrees.
Picture in the mirror mode
The picture on the LCD is a mirror-image. However, the picture will be normal when
recorded.
During recording in the mirror mode
You cannot operate the ZERO SET MEMORY on the Remote Commander.
Indicators in the mirror mode
The STBY indicator appears as Xz and REC as z. Some of other indicators appear
mirror-reversed and others are not displayed.
When recording with the LCD panel opened
Recording time becomes shorter a little compared with when recording with the LCD
panel closed.
Recording a picture
180°
90°
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168

Sony DCR-TRV730 Istruzioni per l'uso

Categoria
Videocamere
Tipo
Istruzioni per l'uso
Questo manuale è adatto anche per

in altre lingue