Rancilio Classe 6 E Manuale utente
- Categoria
- Macchine da caffè
- Tipo
- Manuale utente
Questo manuale è adatto anche per
● E
● S
● L
classe 6
Uso e manutenzione
Emploi et entretien
Gebrauch und Instandhaltung
Use and maintenance
Uso y manutención
Uso e manutenção
Macchina per caffè
Machine à café
Kaffeemaschinen
Coffee machine
Máquina para café
Máquina para café
Gentile cliente,
grazie per averci accordato la Sua fiducia.
Siamo sicuri che il prodotto che Lei ha acquistato risponderà in pieno alle Sue aspettative, come tutti gli
altri articoli della produzione RANCILIO. Il prodotto che Lei si accinge ad usare è il risultato di approfon-
diti studi e meticolose sperimentazioni fatte dalla RANCILIO per offrirLe quanto di più funzionale, sicuro
ed apprezzabile, anche sotto il profilo del design, si possa trovare sul mercato. Il libretto di istruzioni
per il corretto uso e manutenzione della macchina La aiuterà a sfruttare al meglio le sue elevatissime
possibilità e prestazioni.
Con l’augurio di poterLa sempre annoverare tra i nostri clienti, Le auguriamo una buona lettura.
IT
Cher Client,
Nous Vous remercions pour Votre confiance.
Nous sommes certains que le produit que Vous avez acheté correspondra entièrement à Vos désirs,
comme du reste tous les articles de la production RANCILIO. Le produit que Vous allez employer est
le résultat d’études approfondies et de méticuleux essais effectués par RANCILIO afin de pouvoir Vous
offrir le produit le plus fonctionnel, le plus sûr et le plus remarquable, également du point de vue design,
que l’on puisse trouver sur le marché. Le petit livre d’instructions pour l’emploi correct et l’entretien de
la machine Vous aidera à tirer le maximum de ses grandes possibilités et performances. Nous sommes
certains que nos explications sont claires et espérons, cher client, mériter Votre fidélité.
Sehr geehrte Kundin/sehr geehrter Kunde,
Zuerst möchten wir Innen für das uns entgegengebrachte Vertrauen danken.
Wir hoffen, dass das von Ihnen gekaufte Produkt Ihren Erwartungen in jeder Hinsicht entsprechen
wird-wie übrigens auch all unsere anderen Erzeugnisse. Das Produkt das Sie in Gebrauch nehmen
werden, ist das Resultat von sorgfältigen von RANCILIO Untersuchungen und Tests, um Ihnen in Bezug
auf Funktionalität, Sicherheit, Leitungsfähigkeit sowie Design ein Produkt anbieten zu können, das das
Beste auf Markt befindliche ist. Das Büchlein mit den Anwiesungen für eine korrekte Bedienung und
Wartung der Maschine wird Ihnen behilflich sein, das Beste aus Ihnem Gerät zu machen. Wir hoffen,
dass unsere Erklärungen verständlich sind und dass Sie auch in Zukunft zu unseren Kunden zählen
dürfen.
Mit freundlichen Grüssen.
Dear Customer,
First of all, thank you choosing RANCILIO.
We are confident that the product you have purchased will come up to all your expectations-just as all
our other products are designed to do. The product that you are about to use is the outcome of pain-
staking research and tests. The Rancilio’s consistency assures quite sure that the equipment we have
supplied you with, is the most functional, safe and satisfactory of its kind to be found on the market, as
regards both its design and its efficency. The booklet of instructions for its correct use and maintenance
will help you to get the best possible service out of your machine. We trust you will find our explanations
clear and we may continue, in the future, to count you among our esteemed customers.
Muy estimado cliente:
muchas gracias por habernos acordado Su confianza.
Estamos seguros que el producto que Ud. ha adquirido responderà seguramente a Sus esperanzas,
asi como és por todos los demás articulos RANCILIO fabrica. El producto que Ud. se apresta a utilzar
és el resultado de particulares estudios y pruebas meticulosas hechas por la firma RANCILIO para
ofrecerle un producto funcional, seguro y apreciable, tambien por lo que se refiere al design, segu-
ramente uno de los mejores que Ud. pueda encontrar en comercio. El manual de instrucciones para
utilizar correctamente y efectuar la manutención de la máquina, la ayudará a disfrutar a lo máximo las
elevadas posibilidades y prestaciones de la misma. Mientras confiamos que Ud. siga siendo siempre
Cliente nuetro, le deseamo una provechosa lectura.
FR
DE
EN
ES
PT
Prezado Cliente,
Obrigado por nos ter dado a sua confiança.
Temos certeza que o produto que Você comprou responderá totalmente as suas expectativas, como
todos os outros artigos da produção RANCILIO. O produto que Você está para usar é o resultado de
estudos profundos e experiências meticulosas feitas pela RANCILIO, para oferece-lhe quanto de mais
funcional, seguro e considerável, também sob o perfil do disign, que se possa encontrar no mercado. O
manual de instruções para o uso correto e manutenção da máquina lhe ajudará a desfrutar ao máximo
as suas elevadíssimas possibilidades e desempenhos.
Com o desejo de poder tê-lo sempre entre os nossos clientes, desejamo-lhe uma boa leitura.
Tratamento do lixo dos aparelhos elétricos e eletrônicos
Jogar o produtos seguindo as normas em vigor relativas à coleta diferencia-
da em centros de coleta apropriados.
Não tratar como simples lixo urbano.
Para qualquer informação necesssária contatar o construtor no endereço indicado
no manual de instruções.
O produto responde aos requisitos exigidos pelas novas diretrizes introdu-
zidas para tutelar o ambiente e deve ser sucadato em modo apropriado ao
final do seu ciclo de vida.
Afvalbehandeling van de elektrische en elektronische apparatuur
Verwerk het product volgens de geldende normen m.b.t. de gescheiden
afval bij de voorbestemde vuilniscentrums.
Behandel het product niet als eenvoudig stadsvuil.
Neem contact op met de constructeur op het aangegeven adres in deze handleiding
voor nadere informaties.
Het product beantwoordt aan de door de nieuwe richtlijnen verlangde verei-
sten ingevoerd ter bescherming van het milieu en moet op passende wijze op
het einde van zijn levenscyclus worden verwerkt.
Postępowanie z odpadami pochodzącymi z urządzeń elektrycznych/
elektronicznych
Produkt musi zostać poddany utylizacji zgodnie z obowiązującymi przepi-
sami dotyczącymi segregowania odpadów w specjalnie do tego wyznaczonych miej-
scach. Nie wyrzucać razem ze zwykłymi odpadami miejskimi.
W celu uzyskania jakichkolwiek informacji proszę skontaktować się z producentem
pod adresem podanym w instrukcji obsługi dla użytkownika.
Ten produkt odpowiada wymogom zawartym w nowych dyrektywach
wprowadzonych w celu ochrony środowiska i po zakończeniu cyklu eksploa-
tacji musi zostać zutylizowany we właściwy sposób.
Obdelava odpadkov električnih in elektronskih naprav
Odlaganje izdelkov je potrebno vršiti v skladu z veljavnimi predpisi v zvezi z
selektivnim odlaganjem odpadkov v centrih za zbiranje odpadkov ki so temu
namenjeni. Ne odlagajte ga kot običajne smeti.
Za kakršnokoli informacijo kontaktirajte proizvajalca na naslovu, ki je naveden v
priročniku z navodili.
Izdelek odgovarja zahtevam novih smernic, ki so uvedene zaradi zaščite
življenske sredine in mora biti odložen na ustrezen način po koncu življenjske
dobe.
Kā utilizēt elektrisko/elektronisko iekārtu atkritumus
Iekārtu atkritumus nepieciešams utilizēt atbilstoši spēkā esošajiem noteikumiem,
kuri reglamentē dažādu veidu atkritumu utilizēšanu tikai speciālajās atkritumu
konteineros. Nemetiet šos atkritumus parastajos kopējos pilsētas atkritumu.
Lai saņemtu jebkuru informāciju, griezieties pie ražotāja, kura adrese uzrādīta
ekspluatācijas instrukcijā.
Dotais produkts atbilst jaunās direktīvas prasībām, kura attiecās uz
ekoloğisko drošību, un tas ir atbilstošā kārtībā utilizējams pēc tā, kad nobei-
gsies tā derīguma termiņš.
Zacházení s odpady z elektrických / elektronických zařízení
Výrobek likvidujte podle současných předpisů o likvidaci tříděného odpadu
na k tomu určených skládkách.
Nezacházejte s ním jako s běžným obecním odpadem.
Potřebujete-li jakékoli informace, kontaktujte prosím výrobce na adrese uvedené v
návodu pro použití.
Výrobek odpovídá požadavkům nových směrnic zavedených pro ochranu
životního prostředí a zlikvidovat se na konci své životnosti musí příslušným
způsobem.
Zaobchádzanie s odpadmi z elektrických / elektronických zariadení
Výrobok likvidujte podľa súčasných predpisov o likvidácii triedeného odpa-
du na k tomu určených skládkach.
Nezaobchádzajte s ním ako s bežným komunálnym odpadom.
Ak potrebujete akékoľvek informácie, kontaktujte, prosím, výrobcu na adrese uve-
denej v návode na použitie.
Výrobok zodpovedá požiadavkám nových smerníc zavedených pre ochra-
nu životného prostredia a zlikvidovať sa na konci svojej životnosti musí
príslušným spôsobom.
Kur išmesti elektros \ elektroninės įrangos atliekas.
Šalinkite įrangos atliekas atitinkamai esamų taisyklių, kurios liečia tokios
rūšies atliekas apie specialias atliekų kaupimo vietas.
Nemeskite atliekas į paprastus miesto šiukšlių konteinerius. Papildomos informa-
cijos kreipkitės į gamintoją nurodytu vartotojo instrukcijoje adresu .
Šis produktas atitinka įvestos ekologiniam saugumui naujos direktyvos
reikalavimams ir turi būti sunaikintas pasibaigus jo atitikties terminui.
Entsorgung von elektrischen und elektronischen Geräten
Das ist Produkt gemäß den geltenden Normen für die Mülltrennung bei den
zuständigen Sammelzentren zu entsorgen.
Nicht wie normalen Müll behandeln.
Weitere Informationen sind beim Hersteller unter der in der Gebrauchsanleitung an-
gegebenen Adresse zu erhalten.
Das Produkt entspricht den Erfordernissen den neuen Richtlinien über den
Umweltschutz, und muss an seinem Lebensende entsprechend entsorgt wer-
den.
Treatment of waste from electric/electronic equipment
Dispose of the product in accordance with current regulations concerning diffe-
rentiated waste disposal in dedicated waste disposal areas.
Do not treat as simple urban waste.
For any information please contact the manufacturer at the address specified in the user
manual.
The product complies with the requirements of the new directives introduced for
the environmental safeguard and must be disposed of appropriately at the end
of its life cycle.
Trattamento dei rifiuti delle apparecchiature elettriche ed elettroniche.
Smaltire il prodotto seguendo le norme vigenti relative allo smaltimento
differenziato presso centri di raccolta dedicati.
Non trattare come semplice rifiuto urbano.
Per qualsiasi informazione necessaria contattare il costruttore all’indirizzo indicato
nel libretto istruzioni.
Il prodotto risponde ai requisiti richiesti dalle nuove direttive introdotte a tutela
dell’ambiente e che deve essere smaltito in modo appropriato al termine del
suo ciclo di vita.
Traitement des ordures des équipements électriques et électroniques
Ecouler le produit conformément aux normes en vigueur concernant l’écou-
lement différencié auprès de centres de récolte dédiés.
Ne pas traiter comme simples ordures urbaines. Pour toute information nécessaire
contacter le constructeur à l’adresse indiquée dans le manuel d’emploi.
Le produit est conforme aux caractéristiques requises par les nouvelles direc-
tives introduites pour la sauvegarde de l’environnement et doit être écoulé de
façon appropriée à la fin de son cycle de vie.
Tratamiento de los desechos de los equipos eléctricos y electrónicos
Eliminar el producto en los centros de recolección especializados, siguiendo
las normas vigentes relativas a la eliminación diferenciada.
No tratar como simple desecho urbano.
Para cualquier información necesaria, contacten al fabricante en la dirección indica-
da en el manual de instrucciones.
El producto responde a los requisitos demandados en las nuevas directivas
introducidas para la protección del ambiente y debe ser eliminado de manera
apropiada al final de su ciclo de vida.
Behandling af affald fra elektrisk/elektronisk udstyr
Bortskaf produktet i overensstemmelse med nuværende reguleringer vedr.
forskellige affaldsprodukter på deponeringssteder dedikeret til affald.
Må ikke behandles som alm. byaffald.
Kontakt producenten på den specificerede adresse i brugerhåndbogen for yderligere
oplysninger.
Produktet er i overensstemmelse med de nye direktiver, introduceret for mi-
ljøforanstaltningen og skal bortskaffes på behørig vis ved slutningen af dets
livscyklus.
Avfallshantering av elektriska och elektroniska apparate
Nedskrota produkten genom att följa gällande normer för differentierad sa-
nering på seriösa uppsamlingsställen.
Behandla det inte som vanligt tätortsavfall.
Vid behov av ytterligare information, var vänlig ta kontakt med tillverkaren på den
adress som anges i bruksanvisningen.
Produkten motsvarar de krav som ställs i de nya miljödirektiven och den
måste nedskrotas på ett lämpligt sätt i slutet av sin livscykel.
Behandling av avfall fra elektrisk/elektronisk utstyr
Produktet skal avhendes i samsvar med gjeldende forskrifter angående dif-
ferensiert avfallsavhending på dediserte avfallsavhendingsområder.
Det må ikke behandles som vanlig byavfall.
For videre opplysninger vennligst kontakt fabrikanten på adressen som er angitt i
bruksanvisningen.
Produktet etterkommer kravene i de nye miljødirektivene og skal avhendes
på en passende måte etter avsluttet bruk.
Elektri- ja elektronseadmete jäätmete töötlemine
Tootest lahtisaamist peab läbi viima vastavalt käibivatele eeskirjadele, mis
käsitlevad jäätmetest eristatud lahtisaamist selleks mõeldud jäätmetest
lahtisaamise alades.
Mitte töödelda nagu tavalisi majapidamisjäätmeid.
Mistahes informatsiooni saamiseks pöörduge palun tootja poole aadressil, mis on
märgitud kasutaja käsiraamatus.
Toode vastab uuetele nõutele, mis on esitletud keskkonna kaitsmiseks ja sel-
lest peab reeglipäraselt lahti saama selle elutsükli lõpus.
Sähköisten ja elektronisten laitteiden jätteiden käsittely
Hävitä tuote noudattaen seuraavia voimassa olevia lajitellun jätteiden käsit-
telyä koskevia määräyksiä asianmukaiseen jätteidenkäsittelylaitokseen.
Älä käsittele sitä tavallisena kaupunkijätteenä.
Mitä tahansa tietoja varten ota yhteyttä valmistajaan ohjekirjassa olevaan osoittee-
seen.
Tuote on uusien ympäristöä suojaavien direktiivien vaatimusten mukainen ja
se tulee hävittää asianmukaisella tavalla sen käyttöiän päätyttyä.
Az elektromos és elektronikai készülékek hulladékkezelése
A terméket az erre a célra kijelölt gyűjtőhelyekre adja le követve a szelektív
hulladékgyűjtéssel kapcsolatos jelenlegi jogszabályokat.
Ne kezelje közönséges városi hulladékként.
Bárminemű információért forduljon a gyártóhoz, melynek címét a használati útmu-
tatóban találja.
A termék megfelel a környezet védelme érdekében újonnan bevezetett
irányelvek követelményeinek és ennek megfelelően kell kezelni az élettar-
tamának végeztével.
EUROPEAN UNION ONLY
Il presidente - The president
20010 Villastanza di Parabiago (MI)
Viale della Repubblica 40
DICHIARAZIONE DI CONFORMITA’ CE - DECLARATION DE CONFORMITE CE
EG-KONFORMITÄTSERKLÄRUNG - EC DECLARATION OF CONFORMITY
DECLARACIÓN DE CONFORMIDAD CE - DECLARAÇÃO DE CONFORMIDADE CE
Noi RANCILIO Macchine per caffè S.p.A.
Dichiariamo sotto la nostra responsabilità che il prodotto: Macchina per caffè per uso professionale
Déclarons, sous notre responsabilité, que le produit : Machine à café d’utilisation professionnel
Wir erklären auf unsere Verantwortung, daß das Produkt: Kaffeemaschine für Beruflichgebrauch
Declare under our responsibility that the product: Espresso coffee makers for commercial use
Declaramos bajo nuestra responsabilidad que el producto: Máquina para café de uso profesional
Declaramos sob a nossa responsabilidade que o produto: Máquina para café para uso profissional
La presente dichiarazione perde la sua validità se la macchina viene modificata senza la nostra espressa autorizzazione.
La présente déclaration perd sa validité dès lors que la machine est modifiée sans notre expresse autorisation.
Die vorliegende Erklärung verliert ihre Gültigkeit, wenn die Maschine ohne unsere ausdrückliche Genehmigung verändert wird.
The present declaration will become invalid should the machine be modified without our specific authorization.
La presente declaración pierde su validez si la máquina es modificada sin nuestra expresa autorización.
A presente declaração perde a validade se a máquina é modificada sem a nossa expressa autorização.
al quale è riferita questa Dichiarazione, secondo quanto prescritto dalle direttive specifiche:
à laquelle se réfère cette déclaration, selon les prescriptions des directives spécifiques.
auf das sich diese Erklärung bezieht, Entsprechend der Vorschriften der spezifischen Richtlinien.
to which this declaration relates is, according to the provisions of the specific directives:
al cual se refiere esta Declaración, de acuerdo con lo prescrito por las específicas directivas:
ao qual se refere esta Declaração, segundo quanto prescrito pelas específicas diretrizes:
98/37/CE
Direttiva macchina - Direttiva machine - Richtlinie Maschine - Makers directive - Directiva máquina - Diretriz da máquina:
73/23/CEE, 93/68/CEE
Direttiva Bassa Tensione - Direttiva Basse Tension - Niederspannungsrichtline - Low Voltage Directive - Directiva Baja Tensiòn - Diretriz Baixa Tensão:
89/336/CEE, 93/68/CEE, 92/31/CEE
Direttiva EMC - Direttiva EMC - Richtlinie EMC - EMC Directive - Directiva EMC - Diretriz EMC
97/23/CE
Direttiva attrezzatura a pressione (PED)-Directive sur les appareillages sous pression (PED)-Richtlinie für unter Druck stehende Geräte (PED) Pressure
device directive (PED) - Directiva equipos de presión (PED) - Diretriz aparelhagem de pressão (PED)
è conforme alle seguenti norme: - conforme aux normes suivantes :
In Übereinstimmung mit den folgenden Normen: - it complies with the following norms:
es conforme a las siguientes normas: - É conforme as seguintes normas:
EN 60335-1, EN 60335-2-75, EN 55014-1, EN 55014-2, EN 61000-3, EN 61000-4, EN 50366
Norme EN armonizzate - Normes EN harmonisées - Harmonisierte EN-Norme - Harmonized EN norms - Normas EN armonizadas - Normes EN Harmonia
N°MODULO MD-CER.01
7
Fig. 1
Fig. 2
A
Descrizione attrezzatura a pressione-Description de l’appareillage sous pression-Beschreibung der unter Druck stehenden Geräte-
Pressure device description-Descripción de los equipos de presión - Descrição dos equipamentos de pressão
Pressione Max.r
Pression - Druck
Pressure - Presión
Pressão
Temp.max
Température - Temperatur
Temperature - Temperatura
Temperatura
Fluido - Fluide
Flüssig - Fluid
Fluido - Fluído
Capacità lt-Capacité lt-Fähigkeit lt-
Capacity lt-Potencia lt- Potência it
1 gr. 2 gr.C 2 gr. 3 gr. 4 gr.
Caldaia - Chaudière
Kessel - Boiler
Caldera - Caldeira
0,18/1,8 Mpa/bar 131,2 C°
Acqua/Vapore - Eau/Vapeur
Wasser/Dampf - Water/Steam
Agua/Vapor - Água/Vapor
5 5 11 16 22
Pressione Max.
Pression - Druck
Pressure - Presión
Pressão
Temp.maxTempérature-
Temperatur
Temperature-Temperatura
Temperatura
Fluido - Fluide
Flüssig - Fluid
Fluido - Fluído
Capacità lt
Capacité- Fähigkeit
Capacity - Potencia
Potência it
Numero scambiatore -Numéro de l’échangeur
Nummer des Austauschers-Exehanger number
Número intercambiador-Número Intercambiador
1 gr. 2 gr.C 2 gr. 3 gr. 4 gr.
Scambiatore - Echangeur
Austauscher - Exchanger -
Intercambiador - Intercambiador
1.2/12 Mpa/bar
131,2 C°
Acqua - Eau
Wasser - Water
Agua - Água
0,35 1 2 2 3 4
8
Fig. 3
1
3
6
4
1
14
1
4
16
1
1
2
3
6
8
9
10
13
17
4
15
2
1
5
11
12
7
9
4
3
L
o
v
a
to
L
2 (3/8"G)
1 (Ø 30 mm)
H
D
C
B
A
Fig. 4
Fig. 5
Fig. 6
Fig. 7
10
6
10
1
2
3
11
MOD. E
4B
A
B
C
D
E
7
4C
11
MOD. L
5C
5B
7
8
9
6
4A
11
MOD. S
5A
Fig. 8
11
5
1
2
3
4
4
1
2
3
Fig. 9
Fig. 10
Fig. 12
Fig. 11
Fig. 13
Fig. 14
48
EN ENGLISH
CONTENTS
Machine identification data ..........................49
1. General safety rules ..................................49
2. Description .................................................50
2.1. Specifications and composition ............50
2.2. Machine equipment ..............................50
2.3. Mechanical protective devices ..............51
2.4. Electric safety devices ..........................51
2.5. Aerial noise ...........................................51
2.6. Vibrations ..............................................51
3. Technical data ............................................51
3.1. Dimensions and weights .......................51
4. Use ..............................................................51
4.1. Precautionary measures ......................52
5. Transport ....................................................52
5.1. Packaging .............................................52
5.2. Inspection on receipt ............................52
6. Installation .................................................52
6.1.Connections to be made by the user .....53
6.1.1. Water and gas supply ........................53
6.1.2. Electric supply ...................................53
6.2. Preliminary operations ..........................53
6.3. Lever assembly (Mod.L) .......................53
6.4. Connections ..........................................53
7. Operation ...................................................54
7.1. Controls ................................................54
7.2. Control instruments ..............................54
7.3. Starting up ............................................54
8. Use ..............................................................55
8.1. Preparing coffee ...................................55
8.2. Preparing cappuccino ...........................55
8.3. Warming a beverage .............................56
8.4. Preparing tea, camomile, etc................ 56
9. Adjustments and settings of the dose ....56
9.1.For models E .........................................56
9.1.1. Adjusting the dose .............................56
9.1.2. Adjusting the quantity of hot water ....57
9.2. Tray case assembly ..............................57
10. Maintenance ...............................................57
10.1. Daily ....................................................57
10.2. Weekly ................................................57
10.3. Periodical ............................................58
10.3.1. Renewal of water ...........................58
11. Stopping the machine ...............................58
12. Troubleshooting ........................................58
13. Machines with alternative gas heater
version ........................................................59
The operations marked with this symbol
are to be undertaken exclusively by an
installation technician
The operations marked with this symbol are
to be undertaken by the user.
SCHEMI ELETTRICI
SCHEMAS ELECTRIQUES
SCHALTPLANE
WIRING DIAGRAMS 84-90
ESQUEMAS ELECTRICOS
ESQUEMAS ELÉTRICOS
SCHEMI IDRAULICI
SCHÉMAS HYDRAULIQUES
HYDRAULIKPLÄNE
HYDRAULIC DIAGRAMS 91-93
ESQUEMAS HIDRÁULICOS
ESQUEMAS HIDRÁULICOS
IT ITALIANO 12-23
FR FRANCAIS 24-35
DE DEUTSCH 36-47
EN ENGLISH 48-59
ES ESPAÑOL 60-71
PT PORTUGUÊS 72-83
49
● Do not leave the machine exposed to atmosphe-
ric agents or place them in damp rooms such as
bathrooms.
● Do not obstruct the suction or dispersion grilles
and do not cover with cloths, etc.
● Keep the packed machine in a dry place, not
exposed to atmospheric agents and in conditions
in which the temperature does not go below 5°C.
Do not stack more than three items of the same kind.
Do not place heavy items on the packaging.
● In an emergency, such as the breaking out of a fire,
unusual noise, overheating, etc., take immediate
action, disconnecting the power and closing gas
and water taps.
● Only use original spare parts in order to avoid
compromising the safety and proper functioning
of the machine.
Erroneous installation can cause damage
to people, animals and things for which the
manufacturer cannot be considered respon-
sible
NAME: Coffee machine, CLASSE 6 series
MODEL: E -S - L
VERSIONS: 1 - 2 - 3 - 4 GROUPS (L)
2 - 2 COMPACT - 3 GROUPS (E - S)
The label illustrated on the EC Declaration of Conformity of this instruction manual corresponds to the identifi-
cation label placed on the machine Fig. 2. (Pos. A).
Label identification (Fig.1):
1 Manufacturer
2 Model and version
3 Voltage
4 EC conformity mark (if required)
5 Serial number
6 Boiler data
7 Machine total absorption
8 Protection level
9 Motor power
10 Heating element power
11 Frequency
12 Conformity marks
13 Year of manufacture
Symbols
Warning signal. The instructions which refer to this signal must be followed with great care in order to
avoid accidents or damage to the machine.
This manual is an integral and essential part of the product and must be delivered to the user. The warnings
contained in it must be read carefully, as they supply important indications relating to the safety of installation,
use and maintenance. Keep this manual for future reference.
1. GENERAL SAFETY RULES
● Don’t leave the packing elements (plastic bags,
expanded polystyrene, nails, cardboard, etc.)
within the reach of children, as these elements
are potential sources or danger.
● Check that the data on the machine corresponds
to that of the electrical supply network, before
connecting the equipment.
● Adaptors, multiple sockets and /or extensions must
not be used.
● In doubt, request an accurate control of the plant
by qualified personnel. The electric plant must be
provided with the following safety devices:
- efficient earth connection;
- section of conductors suitable for absorption
capacity
- efficient earth leakage protection circuit
breaker.
● Install the machine on a water repellent surface
(laminate, steel, ceramic, etc.) away from heat
sources (oven, cooking stove, fireplace, etc.) and
in conditions in which the temperature may not go
below 5°C. KEEP WARM.
50
2.2. Machine equipment
Legend:
A Semiautomatic system; manual dispensing start
and stop.
B Automatic system; electronic control of coffee
and hot water doses dispensed.
C N. of coffee dispensing units.
D N. of steam spouts.
E N. of hot water spouts.
F Operating with economizer.
Gas heating, on request.
1 Steam tap
2 Steam spout
3 Function/service button panel
4 Hot water switch
5 Coffee dispensing unit
6 Coffee dispensing button panel (mod.S - E)
7 Manual water supply button
8 Level indicator
9 Gauge
10 Power on-off switch and led
11 Gas lighter (on specific models)
12 Valved gas tap (on specific models)
13 Switch and boiler resistance engagement light.
14 Programming panel (mod. E)
15 Hot water spout
16 Dispenser control lever (mod.L)
17 Cup heating resistance switch
2. DESCRIPTION
The machines in the CLASSE 6 series have been
designed to prepare express coffee and hot beve-
rages.
A positive-displacement pump inside the machine
powers the heater in which the water is heated. By
pressing the appropriate buttons, water is supplied
to the spouts in the form of hot water or steam, ac-
cording to needs.
The hot water used to make drinks comes from the
boiler and is mixed directly with cold water from the
water outlet.
The machine is composed of a steel carrying struc-
ture on which the mechanical and electrical compo-
nents are fitted. These are completely covered with
panels made of aluminium.
The beverages are dispensed at the front of the
machine, where all the buttons, control devices and
dispensers are to be found.
There is a cup-warming plate on the top of the ma-
chine.
2.1. Specifications and composition (Fig.3)
Models equipped with gas connections (when applied).
1 GROUP
2 GR.COMPACT
2 GROUP
3 GROUP
4 GROUP
1 dose filter holder
1 1 1 1
2 dose filter holder
2 2 3 4
Filters
3 3 4 5
1 mt. supply pipe
1 1 1 1
1,5 mt. supply pipe
1 1 1 1
1,5 mt. drainage pipe
1 1 1 1
Pipe connections
1 1 1 1
Blind disks for cleaning
2 2 3 4
Doser and presser
1 1 1 1
Instruction manual
1 1 1 1
Brush
1 1 1 1
Tray side cases
1 1 1 1
A B C D E
E
- ok 2 - 3 2 1
S
ok - 2 - 3 2 1
L
ok - 1 - 2 - 3 - 4 2 1
51
4. USE
The machine have been designed, manufactured and
protected to be used to make express coffee and hot
beverages (tea, cappuccino, etc.). Any other use is to
be considered unsuitable and therefore dangerous.
The manufacturer cannot be held respon-
sible for any damage caused to people
or things due to unsuitable, erroneous or
irrational use of the machine.
2.3. Mechanical protective devices
The machine is equipped with the following protective
devices:
● complete panelling protection of all the parts
subject to heat and of the steam and hot water
supplier;
● cup-warmer plate supplied with a tray to collect
spilt liquids;
● work surface provided with grill and tray to collect
spilt liquids;
● expansion valve in the hydraulic system and valve
on the boiler to avoid overpressure;
● nonreturn valve on the hydraulic system to avoid
flowing back to the main supply.
2.4. Electric safety devices
The safety devices provided are:
● 12V low tension push buttons an the E control key
panel;
● thermal protection on the pump motor;
● gas failure thermocouple and thermocouple ther-
mostat automatically closing gas tap;
● safe resistance thermal;
● Electronic safety devices.
2.5. Aerial noise
Noise level in the working place does not usually
exceed 70dB(A).
2.6. Vibrations
The machine is supplied with rubber vibration dam-
ping feet. In normal working conditions, the machine
does not produce vibrations harmful to the operator
and the environment.
3. TECHNICAL DATA
3.1. Dimensions and weights (Fig.4)
You’ll find all the technical data on electric
connection, on the machine identification
label Fig. 1.
Machines provided with gas heating have a standard
connection kit to carry out the following connections
with:
- direct stiff pipe;
- copper and double cone pipe;
- rubber support.
Gas connections must be made in complian-
ce with the safety regulations in force in the
relative country.
1 GROUP
2 GR.
COMPACT
2 GROUP 3 GROUP 4 GROUP
A mm
690 690 850 1090 1330
A1* mm
570 570 730 970 1210
B mm
505 505 665 905 1145
C mm
500 500 500 500 500
D mm
300 300 300 300 300
H mm
490 490 490 490 490
H1** mm
850 - 850 850 850
Boiler capacity in litr.
5 5 11 16 22
Machine weight kg
53 55 76 94 112
Water inlet
3/8” 3/8” 3/8” 3/8” 3/8”
Ømm drainage
14 14 14 14 14
Packaging
Volume m
3
0.28 0.28 0.35 0,45 0,54
Dimensions L x P x H mm
760x650x605 760x650x605 880x650x605 1120x650x605 1360x650x605
Gross weight kg
63 65 76 90 108
* A1(reduced overall dimensions with side case assembly)
**H1 (version lever)
52
5. TRANSPORT
5.1. Packaging
The machine is delivered in a strong cardboard box
with internal protection.
The packaging bears symbols which must be obser-
ved during handling and stocking of the item.
Always keep the package in a vertical position
during transport. Do not turn it over or lay it
on its side and avoid bumping and exposure
to atmospheric agents.
The operator must always follow the indications con-
tained in this manual. In the case of a failure or if the
machine is not working properly, switch it off and do
not attempt any direct repair. Refer exclusively to a
service centre.
The user must not:
● touch the hot surfaces and dispensing areas;
● place liquids containers on the machine;
● put his hands under the spouts during use;
● transport the machine or carry out maintenance
operations when the plug is connected or when
the machine is hot;
● wash the machine with water or steam jet;
● dip completely or partially the machine in water;
● use the machine if the cable is damaged;
● touch the machine when his hands or feet are wet
or damp;
● use the machine when there are children in its
proximity;
● allow the machine to be used by children or unfit
people;
● obstruct the suction or dispersal grilles with cloth
or any other thing;
● do not use the machine when wet or very damp.
4.1. Precautionary measures
This machine may only be used with foodstuffs. It
cannot be used for heating liquids or grinding any other
kind of product that could damage and pollute it.
The manufacturer cannot be held responsible
for damage to people or things caused by
unsuitable, erroneous or irrational use.
5.2. Inspection on receipt
Check that the machine received corresponds to
the one indicated on the delivery note, including any
accessories.
Check that it has not been damaged during transport
and, if so, inform the forwarder and our customer
service office immediately.
The packing elements (plastic bags, expan-
ded polystyrene, nails, cardboard, etc.) must
not be left within reach of children as they are
potential sources of danger. Do not dispose
of the packing elements in the environment;
consign them to firms authorized for their
disposal.
6. INSTALLATION
The appliance is only to be installed in loca-
tions where use and maintenance is restricted to
trained personnel.
The machines are fitted with height adjustable feet.
The support surface shall be levelled, dry, smooth,
steady and stable and at such a height that the cup-
warming surface is at over 150 cm from ground. Do
not use water jets or install where water jets are
used.
In order to guarantee normal operation, the machine
must be installed in areas that the environmental
temperature is between +5°C ÷ +32°C end humidity
of not over 70%.
It does not need to be anchored to the surface and it
does not require any technical operations to dampen
vibrations in order to operate properly.
It is recommended to leave the area around the ma-
chine free to facilitate its use and the performance
of any maintenance operations.
If the machine is wet or very damp, wait until it is
completely dry before installing or using it. It is always
necessary to request an accurate control to qualified
service people in order to find any possible damage
to the electric components.
Reserve an area near the machine for the installa-
tion of the coffee grinding and dosage machine (see
relevant documentation).
The machine is usually equipped with a water sof-
tener, type DP2 or DP4, which must be connected
by the user in compliance with the laws in force.
Should a different softener be installed, refer to the
documentation of the relevant product.
A dreg drawer should be fitted by the installer.
53
6.1. Connections to be made by the
user
Hook-up must be carried out by qualified
personnel in full accordance with federal,
state and local regulations.
6.1.1. Water and gas supply (Fig.5)
This equipment is to be installed to
comply with the applicable federal, state
or local plumbing codes.
Connections must be installed close to the machine.
● Water drainage pipe 1, having a minimum internal
diameter of 30 mm, equipped with a water-trap
accessible for inspection.
● Water supply pipe 2, with a 3/8"G cut-off tap.
● Gas supply pipe 3, with a cutoff tap.
Make sure that the maximum supply pressure
does not exceed 6.5 bar; otherwise, install a
pressure reducer.
The machine with gas heating must be instal-
led in compliance with current local laws.
6.1.2. Electric supply
The machine is supplied ready for connection
according to the required electrical specifications.
Before connecting the machine ensure that the plate
details comply with those of the electric distribution
network.
The electrical connection cable must be directly
connected to the connection provided according to
current legislation. Ensure that the earthing system
is efficient and in compliance with current legal re-
quirements.
The earthing system and the lightening protection
system must be realized in accordance with the
provisions of current legislation.
For the supply network use a cable in compliance with
standards with protective conductor (earthing wire).
For three-phase power use a cable with 3 conductors
( 3 phases + neutral + earth).
For single phase power supply use a cable with 3
conductors (phase + neutral + earth).
In both cases it is necessary to provide an automatic
differential switch (Fig.5) at the start of the power cable,
complete with magnetic release elements in accord-
ance with the identification plate details (Fig. 1). The
contacts must have an opening of equal or over 3 mm
and with dispersed current protection of 30 mA.
Remember that each machine must be fitted with its
own safety elements.
WARNING:
Should the power supply cable be damaged
it is to be replaced by the manufacturer or by
its technical assistance service or by person
with equivalent qualification, in order to pre-
vent any risks.
6.2. Preliminary operations (Fig.6)
P O T E N T I A L - E Q U A L I Z I N G
CONNECTION
This connection, which is the one called for by several
norms, avoids electrical potential differences, building
up between any equipment that may be installed in
the same room. There is a terminal clip on the under
side of the base of the machine to which an external
potential-equalizing wire should be connected.
This connection is ABSOLUTELY NECESSARY and
must be made right after the machine is installed.
Use a wire whose cross-sectional area conforms to
the existing norms.
6.4. Connections
● Place the machine on the horizontal
surface previously prepared.
Before connecting, thoroughly wash the mains water
pipes:
● Leave the water supply taps running at full pres-
sure for several minutes.
● Connect to the mains water supply.
● Connect the machine to the socket.
● Connect the gas pipe.
Thoroughly wash all the water pipes of the machine:
● Leave the water supply taps running at full pres-
sure.
● Switch on main switch 1 (Fig.8): wait until the boiler
fills up to the level set.
● Switch on boiler resistance switch 2 (Fig.8) to begin
heating the water in the boiler.
● Operate each unit in order to allow the water to escape
for about one minute; repeat the operation twice.
● Deliver steam from the steam jets for about one
minute.
● Deliver hot water for about one minute; repeat the
operation twice.
● Switch off switches 1 and 2.
● Empty the water from the boiler: see point
10.3.1.
IMPORTANT
Should the machine not deliver water for over
24 hours, wash the internal components be-
fore beginning work, repeating the operations
as described above.
6.3. Lever assembly (Mod.L) (Fig.7)
During the installation, the lever shall be assem-
bled.
To carry out this operation, assemble the upper case
according to the instructions in Fig.7 (1 and 2).
Fix the case by tightening the screws and then screw
the lever in the upper part.
54
7.3. Starting up
● Turn on the water supply tap 2 Fig.5.
● Turn the main switch 1; the pump is activated, filling
the boiler.
● When the water reaches the correct level, the
pump stops.
Turn the main switch 2 to begin heating the water
in the boiler then turn each one until water begins
to flow from them.
● Wait for the machine to reach its working pressure
and to reach the correct thermal balance.
7. OPERATION
7.1. Controls (Fig.8)
1 Main switch
Two-position switch with led.
Turn on the switch (led on) the machine is turned
(apart from the boiler) and the pump is turned on
to fill the boiler;
2 Boiler resistance switch
Two-position switch with led.
On activating the switch (the led comes on) and
power is supplied to the resistance for the boiler
water.
3 Cup heating resistance switch
Two-position switch with led.
By turning on the switch (led on), the cup heating
resistance is power supplied.
4A Coffee dispensing switch (mod.S)
Two-position switch:
With switch ON, coffee is dispensed;
With switch OFF, dispensing of coffee is interrup-
ted.
4B Coffee Dispensing Electronic Panel (mod. E)
This panel features 5 buttons for each dispenser
(max 4) and 5 LEDs consisting of the following:
4 (A-B-C-D) buttons for start/stop dispensing the
programmed coffee dose
1 (E) button for:
- Stop dispensing any dose
- Start in continuous mode
- Initialize dose programming for self-learning if
pressed for about 8 sec.(If the function is ena-
bled)
Each time a coffee is dispensed, the LED of the
relative button lights up.
During dose programming, the LED of the 5
th
button flashes rapidly.
If the dose is supplied irregularly or the volumetric
counter is malfunctioning, the LED of the pressed
button flashes dispensing the dose on a time ba-
sis.
4C Coffee dispensing control lever (mod.L)
The lever is usually placed in high position.
Activate hte lever by pushing it down to obtain
coffee dispensing.
5A Hot woter button (mod.S)
Hot water switch (picking up directly from the boi-
ler) with two positions:
With switch ON, the LED flashes and hot water is
dispensed directly from the boiler.
With switch OFF, the LED switches off and dispen-
sing stops.
5B Hot water button (mod.E)
When the button is pressed, hot water is dispensed
directly from the boiler for the set time or until the
button is pressed again.
If you press the button for 2 seconds, dispensing
is continuous and only stops when the button is
pressed again.
Dispensing is discontinued automatically after 30
and 60 seconds, respectively.
5C Hot water supply tap (mod.L)
Tap: turn a antclockwise to open and clockwise to
close.
Safety Devices
Dispensing cannot be carried out if the machine
has not reached the operating pressure or tempe-
rature at least once, and each time that the boiler
pressure drops too much.
6 Steam supply handwheel.
Tap: turn in an anticlockwise direction to open and
clockwise to close.
7 Supplementary manual water filling button
positioned under the discharge basin.
Press down to fill the boiler.
8 Valved gas power tap (models with gas hea-
ting).
Open: vertical position;
Closed: turn 90° in clockwise direction.
9 Piezoelectric button (models with gas hea-
ting).
Firing button: press down firmly to give off the
spark to light the gas for the burner.
7.2. Control instruments (Fig.8)
10 Gauge with mobile needle on a fixed dial with a
double scale.
Visual control of the pump (lower manometer ) and
of the boiler pressure (upper manometer) (mod.
E-S).
11 Minimum and maximum water level indicator .
Visual control of water level in boiler.
12 Control window (models with gas heating).
Visual control of lighting and functioning of the
flame of the gas burner.
55
8. USE
The machine has a top shelf on which the cups are
kept and heated, ready for use.
This is very important to obtain good coffee as the
pre-warmed cup stops the coffee from growing cold
too quickly.
8.1. Preparing coffee
● Unclamp the filter-holder from the dispensing unit
and knock any grouts out into the drawer espe-
cially provided for this purpose, taking care not to
damage the rim of the filter.
● Use the filter for 1 or 2 coffees, according to
need.
● Fill the filter with the measure of coffee, level it off
and press it down gently with the presser.
● Remove any ground coffee that has stuck to the
rim of the filter while pressing.
If ground coffee is left on the rim of the filter, a
leaktight seal is not ensured, with consequent
leaking of water and coffee grounds.
● Lock the filter-holder into the dispensing unit firmly
to obtain a leaktight seal.
● Place the cups under the spouts and start pouring
using control 3 - 4 or button panel 5 according to
model (Fig.8).
Models with gas (Fig.8)
● Turn on the water supply tap 2 (Fig.5).
● Turn on the gas tap 3 (Fig.5).
● Turn the main switch 1; the pump is activated, filling
the boiler.
● When the correct level is reached, the pump stops.
Turn the switch 2 in order to activate the resistance
in boiler.
● Turn the gas tap 8 to the vertical open position and
hold down the incorporated button, at the same
time repeatedly press hard on the piezelectric
button 9 until the spark lights the gas flame (carry
out this operation looking through window 12). Hold
the tap button 8 down for approx. 30 seconds to
allow the safety system to keep the flame lighted.
If the flame goes out, repeat the operation.
Should the flame not light up, avoid insisting
and close the gas tap by turning it 90° in a
clockwise direction.
● Wait until the machine reaches its working pres-
sure and until the correct thermal balance is
achieved.
● When the coffee has been poured, leave the filter-
holder attached to the dispensing unit until the next
coffee is required.
When pouring, beware of the hot parts of the
machine, especially the coffee dispensing
units, the steam and hot water spouts. Do not
put your hands for any reason under the units
and the spouts when they are operating.
The grinding of the coffee beans is of funda-
mental importance to the making of good coffee, and
the granular texture of the resulting grounds should
be such that it takes 25-30 seconds to produce the
beverage. If the coffee is ground too coardsely the
coffee will be pale in colour and weak in flavour, with
only a very small amount of white cream, and if the
grounds are too fine, the coffee will be dark with no
cream. Good coffee can only be made if the beans
are freshly and uniformly ground (only possible when
the blades of the coffee grinder are sharp) and are
then measured out into the correct quantities (roughly
6 grams per measure).
The importance of freshly ground coffee beans is due to
the fact that once ground, they rapidly lose their aromatic
qualities, and fats present in the beans go rancid.
Model L (Fig.8)
Espresso-coffee-machine with mechanical groups
and fixed dosing. Bring down the group control lever
(4C). Wait for the outflow of some coffee drops in
the cup; work the lever only initially, then let it lift up
of itself.
To make 2 coffees, repeat this operation for the
second time.
For the sake of safety, don’t bring down the
lever, if there is no coffee in the filter holder
hooked on the brewing group.
8.2. Preparing cappuccino (Fig.9)
● Make cup of cappuccino with the express coffee.
● Use a high and narrow jug, half-filled with milk.
● Place the jug under the spout so that the nozzle
touches the bottom.
● Turn on the steam tap and lower the jug so that
the nozzle is almost at the surface of the milk.
● Now, raise and lower the vessel constantly so that
the steam nozzle is immersed in and out of the
milk to create the froth.
● Turn off the steam tap and pour the milk into the
cup.
Immediately after carrying out this operation,
clean the spout with a sponge or a clean
cloth so that the milk does not dry on it. Be
careful as the spout is hot and may burn
your hand.
56
9. ADJUSTMENT AND SETTING OF THE
DOSE
9.1. Models E (Fig.8)
It is possible to adjust the dose of coffee and hot
water dispensed by electronically controlled models.
(If the function is enabled)
9.1.1. Adjusting the dose
The quantity of coffee and hot water dispensed can
be adjusted using the button panel or the hot water
controls.
1 Press the button E on any button panel and hold
it down for 8-10 seconds until water stops flowing
from the dispensing unit and the led of the conti-
nuons button on the first button panel on the left
begins flashing.
2 It is necessary to act as to make 1 or 2 cups in
order to reach the correct coffee amount adjust-
ment in the cup.
3 Put the filter-holder (with ground coffee) on the
left unit and the cup under the spout.
4 Operate the selected button (i.e. button A for one
small cup).
5 One the required coffee amount in the cup has
been reached, press the stop button A. Coffe will
stop pouring and the microprocessor will store the
dose.
6 Press the continuous button E again; the led will
go out and the machine will store the new quan-
tity.
7 Make the coffee and check the cup amount in
order to check that programming is correct.
If some doses have to be changed (A-B-C-D), once
at point 5 repeat the instructions in points 3-4-5 for
each dose, remembering to use the filter-holder with
relevant filter and freshly ground coffee.
Then carry out point 6 and repeat point 7 to check
all changed doses.
If all units are to be programmed with the same
doses, the selection of coffee doses is finished. If
the dosage of another unit is to be changed (1-2-3-4
doses), proceed as indicated in the above-mentio-
ned point 1-7, using only the button panel of the
selected unit.
8.4. Preparing tea, camomile, etc.
● Place the jug under the hot water spout and use
the delivery control according to the model (Fig.8).
When the desired quantity has been obtained, turn
off the switch.
● Add the beverage desired.
Models E
For these models, hot water is dispensed in specific
measures (see paragraph 9, adjusting the dose of
hot water).
To dispense hot water in different quantities, proceed
as follows:
● Hold down the delivery control 4 (Fig.8) for at least
four seconds then release the button; the machine
continuously delivers water.
● When the desired measure has been obtained,
press the button E again to interrupt delivery.
When the dose of hot water is being delivered electro-
nically, delivery can be interrupted by pressing the
button 4.
When purified water is used, these beverages often
assume a darker colour.
Should the user prefer a lighter coloured drink, draw
fresh water from an ordinary tap and proceed with
the heating phase as described in point 8.3.
8.3. Heating a beverage
● Immerse the steam spout into the liquid to be
heated.
● Gradually turn on the steam tap 6 (Fig.8); the
steam that bursts in the liquid heats it to the de-
sired temperature.
● Turn off the steam tap when the desired tempe-
rature has been reached.
Immediately after carrying out this operation,
clean the spout with a sponge or clean cloth.
Be careful as the spout is hot and may burn
your hand.
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
Rancilio Classe 6 E Manuale utente
- Categoria
- Macchine da caffè
- Tipo
- Manuale utente
- Questo manuale è adatto anche per
in altre lingue
- English: Rancilio Classe 6 E User manual
Documenti correlati
-
Rancilio CLASSE 10 Original Instructions Manual
-
-
-
-
-
-
-
-
-