Smeg UKC7172NP Manuale utente

Categoria
Frigo-congelatori
Tipo
Manuale utente
UKC7172NP
User Manual
Fridge
Freezer
Istruzioni per
l’uso
Frigo-Con‐
gelatore
CONTENTS
Safety information 2
Safety instructions 3
Operation 5
First use 6
Daily use 6
Hints and tips 7
Care and cleaning 8
Troubleshooting 9
Installation 12
Technical information 17
Subject to change without notice.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
if an incorrect installation and use causes injuries and
damages. Always keep the instructions with the appliance for
future reference.
Children and vulnerable people safety
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
Do not let children play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Keep all packaging away from children.
General Safety
This appliance is intended to be used in household and
similar applications such as:
Farm houses; staff kitchen areas in shops, offices and
other working environments
By clients in hotels, motels, bed and breakfast and other
residential type environments
Keep ventilation openings, in the appliance enclosure or in
the built-in structure, clear of obstruction.
2
Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by
the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
Do not use water spray and steam to clean the appliance.
Clean the appliance with a moist soft cloth. Only use neutral
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Do not store explosive substances such as aerosol cans
with a flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
SAFETY INSTRUCTIONS
Installation
WARNING! Only a qualified
person must install this
appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Obey the installation instruction supplied
with the appliance.
Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
Make sure the air can circulate around
the appliance.
Wait at least 4 hours before connecting
the appliance to the power supply. This
is to allow the oil to flow back in the
compressor.
Do not install the appliance close to
radiators or cookers, oven or hobs.
The rear of the appliance must stand
against the wall.
Do not install the appliance where there
is direct sunlight.
Do not install this appliance in areas that
are too humid or too colds, such as the
construction appendices, garages or
wine cellars.
When you move the appliance, lift it by
the front edge to avoid scratching the
floor.
Electrical connection
WARNING! Risk of fire and
electrical shock.
The appliance must be earthed.
Make sure that the electrical information
on the rating plate agrees with the
power supply. If not, contact an
electrician.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
electrical components (e.g. mains plug,
mains cable, compressor). Contact the
Authorised Service Centre or an
3
electrician to change the electrical
components.
The mains cable must stay below the
level of the mains plug.
Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
Use
WARNING! Risk of injury,
burns, electrical shock or fire.
Do not change the specification of this
appliance.
Do not put electrical appliances (e.g. ice
cream makers) in the appliance unless
they are stated applicable by the
manufacturer.
Be careful not to cause damage to the
refrigerant circuit. It contains isobutane
(R600a), a natural gas with a high level of
environmental compatibility. This gas is
flammable.
If damage occurs to the refrigerant
circuit, make sure that there are no
flames and sources of ignition in the
room. Ventilate the room.
Do not let hot items to touch the plastic
parts of the appliance.
Do not put soft drinks in the freezer
compartment. This will create pressure
on the drink container.
Do not store flammable gas and liquid in
the appliance.
Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
Do not touch the compressor or the
condenser. They are hot.
Do not remove or touch items from the
freezer compartment if your hands are
wet or damp.
Do not freeze again food that has been
thawed.
Obey the storage instructions on the
packaging of frozen food.
Care and cleaning
WARNING! Risk of injury or
damage to the appliance.
Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
This appliance contains hydrocarbons in
the cooling unit. Only a qualified person
must do the maintenance and the
recharging of the unit.
Regularly examine the drain of the
appliance and if necessary, clean it. If
the drain is blocked, defrosted water
collects in the bottom of the appliance.
Disposal
WARNING! Risk of injury or
suffocation.
Disconnect the appliance from the mains
supply.
Cut off the mains cable and discard it.
Remove the door to prevent children
and pets to be closed inside of the
appliance.
The refrigerant circuit and the insulation
materials of this appliance are ozone-
friendly.
The insulation foam contains flammable
gas. Contact your municipal authority for
information on how to discard the
appliance correctly.
Do not cause damage to the part of the
cooling unit that is near the heat
exchanger.
4
OPERATION
Control panel
1 2
4 3
1
Temperature indicator LED
2
FastFreeze indicator
3
FastFreeze button
4
Temperature regulator
ON/OFF button
Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator button
if all LED are off.
Switching off
Keep touching the temperature regulator
button for 3 seconds.
All indicators light off.
Temperature regulation
To operate the appliance, touch the
temperature regulator button until the LED
corresponding to the required temperature
lights up. Selection is progressive, varying
from 2 to 8°C.
At first button touch actual setting LED
keeps blinking.
Any time the button is touch the set
temperature is moved to 1 position .
Corresponding LED will blink for a while.
Touch the setting button until the required
temperature is selected. The set will be
fixed
Coldest setting: +2°C.
Warmest setting: +8°C.
A medium setting is generally
the most suitable.
However, the exact setting should be
chosen keeping in mind that the
temperature inside the appliance depends
on:
room temperature
how often the door is opened
quantity of food stored
appliance location.
FastFreeze function
Press the FastFreeze button.
The FastFreeze indicator appears.
This function stops automatically after 52
hours.
To switch off the function before its
automatic end, press the FastFreeze button
until the FastFreeze indicator turns off
The function switches off by
selecting a different set
temperature.
5
FIRST USE
Cleaning the interior
Before using the appliance for the first time,
the interior and all internal accessories
should be washed with lukewarm water
and some neutral soap to remove the
typical smell of a brand-new product, then
dried thoroughly.
CAUTION! Do not use
detergents or abrasive powders,
as these will damage the finish.
DAILY USE
WARNING! Refer to Safety
chapters.
Freezing fresh food
The freezer compartment is suitable for
freezing fresh food and storing frozen and
deep-frozen food for a long time.
To freeze fresh food activate the FastFreeze
function and place the food to be frozen in
the freezer compartment.
To freeze fresh food activate the FastFreeze
function at least 24 hours before placing the
food to be frozen in the freezer
compartment.
The maximum amount of food that can be
frozen in 24 hours is specified on the rating
plate, a label located on the inside of the
appliance.
The freezing process lasts 24 hours: during
this period do not add other food to be
frozen.
When the freezing process is completed,
return to the required temperature (see
"FastFreeze Function").
In this condition, the refrigerator
compartment temperature might
drop below 0°C. If this occurs
reset the temperature regulator
to a warmer setting.
Storage of frozen food
When first starting-up or after a period out
of use, before putting the products in the
compartment let the appliance run at least
2 hours with the FastFreeze function turned
on.
If large quantities of food are to be stored,
remove all drawers from appliance and
place food on glass shelf to obtain the best
performance.
In the event of accidental
defrosting, for example due to a
power failure, if the power has
been off for longer that the value
shown in the technical data
chart under "Rising time", the
defrosted food must be
consumed quickly or cooked
immediately and then re-frozen
(after cooling).
Thawing
Deep-frozen or frozen food, prior to being
used, can be thawed in the refrigerator
compartment or at room temperature,
depending on the time available for this
operation.
Small pieces may even be cooked still
frozen, directly from the freezer: in this
case, cooking will take longer.
Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
6
Do not move the glass shelf
above the vegetable drawer and
the bottle shelf to ensure correct
air circulation.
Positioning the door shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
1.
Gradually pull the shelf in the direction
of the arrows until it comes free.
2.
Reposition as required.
Ice-cube production
This appliance is equipped with one or
more trays for the production of ice-cubes.
Do not use metallic instruments
to remove the trays from the
freezer.
1.
Fill these trays with water
2.
Put the ice trays in the freezer
compartment.
HINTS AND TIPS
Normal operating sounds
The following sounds are normal during
operation:
A faint gurgling and bubbling sound from
coils sound when refrigerant is pumped.
A whirring and pulsating sound from the
compressor when refrigerant is pumped.
A sudden cracking noise from inside
appliance caused by thermic dilatation (a
natural and not dangerous physical
phenomenon).
A faint click noise from the temperature
regulator when the compressor switches
on or off.
Hints for energy saving
Do not open the door frequently or leave
it open longer than absolutely necessary.
Hints for fresh food refrigeration
To obtain the best performance:
do not store warm food or evaporating
liquids in the refrigerator
do cover or wrap the food, particularly if
it has a strong flavour
position food so that air can circulate
freely around it
Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene bags
and place on the glass shelf above the
vegetable drawer.
For safety, store in this way only one or
two days at the most.
Cooked foods, cold dishes, etc. : these
should be covered and may be placed
on any shelf.
Fruit and vegetables: these should be
thoroughly cleaned and placed in the
special drawer(s) provided.
Butter and cheese: these should be
placed in special airtight containers or
7
wrapped in aluminium foil or polythene
bags to exclude as much air as possible.
Bottles: these need a cap and should be
stored on the door bottle shelf, or (if
equipped) on the bottle rack.
Bananas, potatoes, onions and garlic, if
not packed, must not be kept in the
refrigerator.
Hints for freezing
To help you make the most of the freezing
process, here are some important hints:
the maximum quantity of food which can
be frozen in 24 hours is shown on the
rating plate;
the freezing process takes 24 hours no
further food to be frozen should be
added during this period;
freeze only top quality, fresh and
thoroughly cleaned, foodstuffs;
prepare food in small portions to enable
it to be rapidly and completely frozen
and to make it possible subsequently to
thaw only the quantity required;
wrap up the food in aluminium foil or
polythene and make sure that the
packages are airtight;
do not allow fresh, unfrozen food to
touch food which is already frozen, thus
avoiding a rise in temperature of the
latter;
lean foods store better and longer than
fatty ones; salt reduces the storage life
of food;
water ices, if consumed immediately
after removal from the freezer
compartment, can possibly cause the
skin to be freeze burnt;
it is advisable to show the freezing in
date on each individual pack to enable
you to keep tab of the storage time.
Hints for storage of frozen food
To obtain the best performance from this
appliance, you should:
make sure that the commercially frozen
foodstuffs were adequately stored by the
retailer;
be sure that frozen foodstuffs are
transferred from the foodstore to the
freezer in the shortest possible time;
not open the door frequently or leave it
open longer than absolutely necessary;
once defrosted, food deteriorates rapidly
and cannot be refrozen;
do not exceed the storage period
indicated by the food manufacturer.
CARE AND CLEANING
WARNING! Refer to Safety
chapters.
General warnings
CAUTION! Unplug the
appliance before carrying out
any maintenance operation.
This appliance contains
hydrocarbons in its cooling unit;
maintenance and recharging
must therefore only be carried
out by authorized technicians.
The accessories and parts of
the appliance are not suitable for
washing in a dishwasher.
Periodic cleaning
CAUTION! Do not pull, move or
damage any pipes and/or
cables inside the cabinet.
CAUTION! Take care of not to
damage the cooling system.
CAUTION! When moving the
cabinet, lift it by the front edge
to avoid scratching the floor.
8
The equipment has to be cleaned regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral soap.
2. Regularly check the door seals and
wipe clean to ensure they are clean and
free from debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser and
the compressor at the back of the
appliance with a brush.
This operation will improve the
performance of the appliance and save
electricity consumption.
Defrosting of the refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator compartment
every time the motor compressor stops,
during normal use. The defrost water drains
out through a trough into a special
container at the back of the appliance, over
the motor compressor, where it evaporates.
It is important to periodically clean the
defrost water drain hole in the middle of the
refrigerator compartment channel to
prevent the water overflowing and dripping
onto the food inside.
Defrosting the freezer
The freezer compartment is frost free. This
means that there is no build up of frost
when it is in operation, neither on the
internal walls nor on the foods.
The absence of frost is due to the
continuous circulation of cold air inside the
compartment, driven by an automatically
controlled fan.
Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1.
Disconnect the appliance from
electricity supply.
2.
Remove all food.
3.
Leave the door/doors open to prevent
unpleasant smells.
WARNING! If the cabinet will be
kept on, ask somebody to
check it once in a while to
prevent the food inside from
spoiling in case of a power
failure.
TROUBLESHOOTING
WARNING! Refer to Safety
chapters.
9
What to do if...
Problem Possible cause Solution
The appliance does not oper-
ate.
The appliance is switched off. Switch on the appliance.
The mains plug is not con-
nected to the mains socket
correctly.
Connect the mains plug to
the mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electrical
appliance to the mains sock-
et. Contact a qualified electri-
cian.
The appliance is noisy. The appliance is not suppor-
ted properly.
Check if the appliance stands
stable.
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp is defective. Contact the nearest Author-
ized Service Centre.
The compressor operates
continually.
Temperature is set incorrect-
ly.
Refer to "Operation" chapter.
Many food products to be
frozen were put in at the
same time.
Wait some hours and then
check the temperature again.
The room temperature is too
high.
Refer to climate class chart
on the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool
to room temperature before
storing.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The FastFreeze function is
switched on.
Refer to "FastFreeze func-
tion".
There is too much frost and
ice.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Refer to "Closing the door".
Food products are not wrap-
ped properly.
Wrap the food products bet-
ter.
The compressor does not
start immediately after press-
ing the FastFreeze, or after
changing the temperature.
This is normal, no error has
occurred.
The compressor starts after a
period of time.
10
Problem Possible cause Solution
Water flows into the refrigera-
tor.
The water outlet is clogged. Clean the water outlet.
Food products prevent that
water flows into the water
collector.
Make sure that food prod-
ucts do not touch the rear
plate.
Water flows on the floor. The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor.
Attach the melting water out-
let to the evaporative tray.
Temperature cannot be set. The FastFreeze or Shopping
function is switched on.
Switch off FastFreeze or
Shopping manually, or wait
until the function resets auto-
matically to set the tempera-
ture. Refer to "FastFreeze or
Shopping function".
The temperature in the appli-
ance is too low/too high.
The temperature regulator is
not set correctly.
Set a higher/lower tempera-
ture.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The food products' tempera-
ture is too high.
Let the food products tem-
perature decrease to room
temperature before storage.
Many food products are stor-
ed at the same time.
Store less food products at
the same time.
The door has been opened
often.
Open the door only if neces-
sary.
The FastFreeze function is
switched on.
Refer to "FastFreeze func-
tion".
There is no cold air circula-
tion in the appliance.
Make sure that there is cold
air circulation in the appli-
ance.
If the advice does not lead to
the desired result, call the
nearest Authorized Service
Centre.
Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.
11
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the Authorised
Service Centre.
INSTALLATION
Positioning
This appliance can be installed in a dry, well
ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Cli-
mate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Some functional problems might
occur for some types of models
when operating outside of that
range. The correct operation
can only be guaranteed within
the specified temperature range.
If you have any doubts
regarding where to install the
appliance, please turn to the
vendor, to our customer service
or to the nearest Authorised
Service Centre.
Electrical Connection
CAUTION! Any electrical work
required to install this appliance
should be carried out by a
qualified electrician or
competent person.
WARNING! This appliance must
be earthed.
The manufacturer declines any
liability should these safety
measures not be observed.
The wires in the mains lead are coloured in
accordance with the following code:
A B
C
D
E
A - green and yellow: Earth
C - brown: Live
D - blue: Neutral
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either
with the letter “E“ or by the earth
12
symbol or coloured green and
yellow.
2. Connect the wire coloured blue to the
terminal either marked with the letter
“N“ or coloured black.
3. Connect the wire coloured brown to the
terminal either marked with the “L“ or
coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp (E) is
secure over the outer sheath.
Make sure the electricity supply voltage
is the same as that indicated on the
appliance rating plate.
5.
Switch on the appliance.
The appliance is supplied with a 13 amp
fuse (B). In the event of having to change
the fuse in the plug supplied, a 13 amp
ASTA approved (BS 1362) fuse must be
used.
WARNING! A cut off plug
inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that it is disposed of
safely.
Ventilation requirements
The airflow behind the appliance must be
sufficient.
5 cm
min.
200 cm
2
min.
200 cm
2
CAUTION! Refer to the
assembly instructions for the
installation.
Door reversibility
1. Loosen and remove the upper pin and
the spacer.
2. Remove the upper door.
3.
Loosen the middle hinge.
4. Remove the door.
5. Remove the lower spacer.
6. Loosen the lower pin with a key.
7. Tighten the lower pin on the opposite
side.
8. Install the lower spacer.
9. Install the door.
10. Tighten the spacer and the upper pin.
13
Do a final check to make sure
that:
All screws are tightened.
The magnetic seal adheres to
the cabinet.
The door opens and closes
correctly.
If the ambient temperature is
cold (i.e. in Winter), the gasket
may not fit perfectly to the
cabinet. In that case, wait for the
natural fitting of the gasket.
In case you do not want to carry
out the above mentioned
operations, contact the nearest
Authorised Service Centre. The
Authorised Service specialist will
carry out the reversibility of the
doors at your cost.
Installing the appliance
CAUTION! Make sure that the
mains cable can move freely.
1. If necessary cut the adhesive sealing
strip and then apply it to the appliance
as shown in figure.
x
x
2. Install the appliance in the niche.
3. Push the appliance in the direction of
the arrows (1) until the upper gap cover
stops against the kitchen furniture.
1
2
4.
Push the appliance in the direction of
the arrows (2) against the cupboard on
the opposite side of the hinge.
5.
Adjust the appliance in the niche.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
The lower hinge cover (in the
accessories bag) makes sure that the
distance between the appliance and the
kitchen furniture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
6. Open the door. Put the lower hinge
cover in position.
14
4 mm
44 mm
7.
Attach the appliance to the niche with 4
screws.
I
I
8. Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in
opposite case.
9.
Attach the covers (C, D) to the lugs and
the hinge holes.
E
E
B
D
C
10. Install the vent grille (B).
11. Attach the hinge covers (E) to the hinge.
12. Connect the appliance laterally to the
kitchen furniture sidewall.
13. Disconnect the parts (Ha), (Hb), (Hc)
and (Hd).
Hb Ha
Hc
Hd
14. Install the part (Ha) on the inner side of
the kitchen furniture.
15
ca. 50 mm
ca. 50 mm
21 mm
90°
90°
21 mm
15.
Push the part (Hc) on the part (Ha).
Ha
Hc
16. Open the appliance door and the
kitchen furniture door at an angle of
90°.
17. Insert the small square (Hb) into guide
(Ha).
18. Put together the appliance door and the
furniture door and mark the holes.
Ha
Hb
8 mm
19. Remove the brackets and mark a
distance of 8 mm from the outer edge
of the door where the nail must be fitted
(K).
Ha
K
8 mm
20.
Place the small square on the guide
again and fix it with the screws
supplied.
21.
Align the kitchen furniture door and the
appliance door by adjusting the part
(Hb).
Hb
22. Press the part (Hd) on the part (Hb).
Hb
Hd
Do a final check to make sure that:
All screws are tightened.
The sealing strip is attached tightly to the
cabinet.
The door opens and closes correctly.
16
TECHNICAL INFORMATION
Technical data
Dimensions of the recess
Height mm 1780
Width mm 560
Depth mm 550
Rising time Hours 16
Voltage Volts 230 - 240
Frequency Hz 50
The technical information are situated in the
rating plate, on the external or internal side
of the appliance and in the energy label.
ENVIRONMENT CONCERNS
Recycle the materials with the symbol .
Put the packaging in applicable containers
to recycle it. Help protect the environment
and human health and to recycle waste of
electrical and electronic appliances. Do not
dispose appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
17
INDICE
Informazioni per la sicurezza 18
Istruzioni di sicurezza 19
Uso dell'apparecchiatura 21
Primo utilizzo 22
Utilizzo quotidiano 22
Consigli e suggerimenti utili 24
Pulizia e cura 25
Risoluzione dei problemi 26
Installazione 28
Dati tecnici 33
Con riserva di modifiche.
INFORMAZIONI PER LA SICUREZZA
Leggere attentamente le istruzioni fornite prima di installare e
utilizzare l'apparecchiatura. Il produttore non è responsabile se
un'installazione ed un uso non corretto dell'apparecchiatura
provocano lesioni e danni. Tenere sempre le istruzioni a
portata di mano come riferimento futuro.
Sicurezza dei bambini e delle persone vulnerabili
Questa apparecchiatura può essere usata da bambini a
partire dagli 8 anni e da adulti con limitate capacità fisiche,
sensoriali o mentali o con scarsa esperienza o conoscenza
sull'uso dell'apparecchiatura, solamente se sorvegliati o se
istruiti relativamente all'uso dell'apparecchiatura e se hanno
compreso i rischi coinvolti.
Non consentire ai bambini di giocare con l'apparecchiatura.
La pulizia e gli interventi di manutenzione non devono essere
eseguiti dai bambini senza supervisione.
Tenere i materiali di imballaggio al di fuori della portata dei
bambini.
Avvertenze di sicurezza generali
L'apparecchiatura è destinata all'uso domestico e
applicazioni simili, tra cui:
case di campagna; cucine di negozi, uffici e altri ambienti
di lavoro
clienti di hotel, motel, bed and breakfast e altri ambienti
residenziali
18
Verificare che le aperture di ventilazione, sia
sull'apparecchiatura che nella struttura da incasso, non
siano ostruite.
Non usare dispositivi elettrici o altri mezzi artificiali non
raccomandati dal produttore allo scopo di accelerare il
processo di sbrinamento.
Non danneggiare il circuito refrigerante.
Non utilizzare apparecchiature elettriche all'interno dei
comparti di conservazione degli alimenti, ad eccezione di
quelli consigliati dal costruttore.
Non nebulizzare acqua né utilizzare vapore per pulire
l'apparecchiatura.
Pulire l'apparecchiatura con un panno inumidito e morbido.
Utilizzare solo detergenti neutri. Non usare prodotti abrasivi,
spugnette abrasive, solventi od oggetti metallici.
Non conservare in questa apparecchiatura sostanze
esplosive come bombolette spray contenenti un propellente
infiammabile.
Se il cavo di alimentazione è danneggiato, deve essere
sostituito dal produttore, da un tecnico autorizzato o da una
persona qualificata per evitare situazioni di pericolo.
ISTRUZIONI DI SICUREZZA
Installazione
ATTENZIONE! L’installazione
dell'apparecchiatura deve
essere eseguita da personale
qualificato.
Rimuovere tutti i materiali di imballaggio.
Non installare o utilizzare
l'apparecchiatura se è danneggiata.
Attenersi alle istruzioni fornite insieme
all'apparecchiatura.
Prestare sempre attenzione in fase di
spostamento dell'apparecchiatura, dato
che è molto pesante. Indossare sempre
guanti di sicurezza.
Assicurarsi che l'aria possa circolare
liberamente attorno all'apparecchiatura.
Attendere almeno 4 ore prima di
collegare l'apparecchiatura
all'alimentazione. Questo serve a
consentire all'olio di fluire nuovamente
nel compressore.
Non installare l'apparecchiatura in
prossimità di radiatori, fornelli, forni o
piani di cottura.
La superficie posteriore
dell'apparecchiatura deve essere
appoggiata alla parete.
Non installare l'apparecchiatura dove sia
esposta alla luce solare diretta.
Non installare questa apparecchiatura in
luoghi troppo umidi o freddi, come
aggiunte strutturali, garage o cantine.
Quando si sposta l'apparecchiatura,
sollevarla dal bordo anteriore, così da
non graffiare il pavimento.
19
Collegamento elettrico
ATTENZIONE! Rischio di
incendio e scossa elettrica.
L'apparecchiatura deve disporre di una
messa a terra.
Verificare che i dati elettrici riportati sulla
targhetta dei dati corrispondano a quelli
dell'impianto. In caso contrario,
contattare un elettricista.
Utilizzare sempre una presa elettrica con
contatto di protezione correttamente
installata.
Non utilizzare prese multiple e
prolunghe.
Accertarsi di non danneggiare i
componenti elettrici (ad es. la spina di
alimentazione, il cavo di alimentazione, il
compressore). Contattare il Centro di
Assistenza Autorizzato o un elettricista
per sostituire i componenti elettrici.
Il cavo di alimentazione deve rimanere
sotto il livello della spina di
alimentazione.
Inserire la spina di alimentazione nella
presa solo al termine dell'installazione.
Verificare che la spina di alimentazione
rimanga accessibile dopo l'installazione.
Non tirare il cavo di alimentazione per
scollegare l’apparecchiatura. Tirare
sempre dalla spina.
Utilizzo
ATTENZIONE! Rischio di
lesioni, scottature o scosse
elettriche.
Non apportare modifiche alle specifiche
di questa apparecchiatura.
Non introdurre apparecchiature
elettriche (ad es. gelatiere)
nell'apparecchiatura se non
specificamente consentito dal
produttore.
Fare attenzione a non danneggiare il
circuito refrigerante. Esso contiene
isobutano (R600a), un gas naturale con
un alto livello di compatibilità ambientale,
tuttavia il gas è infiammabile.
Nel caso di danno al circuito refrigerante,
assicurarsi che non si sviluppino fiamme
libere e scintille nel locale. Aerare bene
l'ambiente.
Non appoggiare oggetti incandescenti
sulle parti in plastica
dell'apparecchiatura.
Non introdurre bevande analcoliche nel
vano congelatore. Si verrà a creare una
pressione nel contenitore della bevanda.
Non conservare gas e liquidi infiammabili
nell'apparecchiatura.
Non appoggiare o tenere liquidi o
materiali infiammabili, né oggetti
facilmente incendiabili
sull'apparecchiatura, al suo interno o
nelle immediate vicinanze.
Non toccare il compressore o il
condensatore. Sono incandescenti.
Non togliere o toccare gli oggetti nel
vano congelatore con le mani bagnate o
umide.
Non ricongelare del cibo
precedentemente scongelato.
Attenersi alle istruzioni per la
conservazione riportate sulla confezione
del cibo surgelato.
Pulizia e cura
ATTENZIONE! Vi è il rischio di
ferirsi o danneggiare
l'apparecchiatura.
Prima di eseguire qualunque intervento
di manutenzione, spegnere
l'apparecchiatura ed estrarre la spina
dalla presa.
L'unità refrigerante di questa
apparecchiatura contiene idrocarburi.
L’unità deve essere ricaricata ed
ispezionata esclusivamente da personale
qualificato.
Controllare regolarmente lo scarico
dell'apparecchiatura e, se necessario,
pulirlo. L'ostruzione dello scarico può
causare un deposito di acqua di
sbrinamento sul fondo
dell'apparecchiatura.
Smaltimento
ATTENZIONE! Rischio di
lesioni o soffocamento.
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Smeg UKC7172NP Manuale utente

Categoria
Frigo-congelatori
Tipo
Manuale utente

in altre lingue