Hitachi DZ-MV1000E Manuale utente

Categoria
Videocamere
Tipo
Manuale utente
English
Instruction manual
To obtain the best performance and ensure years of
trouble-free use, please read this instruction
manual completely.
Printed on recycled paper
This manual was printed
with soy based ink.
DZ-MV1000E (UK)
DZ-MV1000E (UK)
FOR TECHNICAL HELP & SERVICE PLEASE CALL
0870 405 4405
FOR DVD-CAM PC SUPPORT YOU CAN ALSO VISIT OUR WEB SITE
http://dvdcam-pc.support.hitachi.ca/
QR35315 ©Hitachi, Ltd. 2005 Printed in Japan OG-S(I)
DZ-MV1000E Instruction Manual
Hitachi Europe Ltd.
Consumer Affairs Department
PO Box 3007, Maidenhead, SL6 8ZE,
UNITED KINGDOM
Tel: 0870 405 4405
Hitachi, Ltd. Japan
English
2
Important Information
For Your Safety
The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the
camera/recorder is to be left unattended for a long period of time, turn it off.
The DVD video camera/recorder and AC adapter/
charger have the following caution marks.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Precautions
WARNING: Many television programmes and
films are copyrighted. In certain circumstances,
copy-right law may apply to private in-home
videotaping of copyrighted materials.
Identifications of caution marks
This symbol warns the user that
uninsulated voltage within the unit
may have sufficient magnitude to
cause electric shock. Therefore, it is
dangerous to make any kind of contact
with any inside part of this unit.
This symbol alerts the user that
important literature concerning the
operation and maintenance of this unit
has been included. Therefore, it should
be read carefully to avoid any
problems.
WARNING: To prevent risk of injury or damage to
your DVD video camera/recorder and the AC
adapter/charger, use only the DZ-BP14S/DZ-
BP14SW battery and DZ-ACS1 AC adapter/
charger.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE
RECOMMENDED ACCESSORIES ONLY.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The liquid crystal display (LCD) panel is made
by highly precise technology. More than 99.99%
of its picture elements (pixels) are effective, but
some (less than 0.01%) may appear as coloured
bright dots. This does not indicate a fault as the
LCD panel stretches the limits of current
technology.
CLASS 1
LASER PRODUCT
CAUTION
This product contains a laser diode of higher
class than 1. To ensure continued safety, do
not remove any covers or attempt to gain
access to the inside of the product. Refer all
servicing to qualified personnel.
English
3
Microsoft
®
, Windows
®
, Windows
®
98, Windows
®
98 Second Edition, Windows
®
Me, Windows
®
2000
Professional, and Windows
®
XP are registered trademarks of Microsoft Corporation.
Intel
®
, Pentium
®
Processor, and Celeron
®
Processor are registered trademarks of Intel Corporation.
IBM
®
and PC/AT
®
are registered trademarks of International Business Machines Corporation.
Manufactured under licence from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Other company names and product names listed are trademarks or brand names belonging to each
individual company.
SD logo is a trademark.
Important for United Kingdom
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of
which is indicated on the pin face of the plug.
Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same
rating. If the fuse cover is detachable never use the plug with the cover omitted. If a replacement fuse
cover is required, ensure it is of the same colour as that visible on the pin face of the plug. Fuse covers
are available from your dealer.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points
in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved
extension lead or consult your dealer.
If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having
first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue=Neutral, Brown=Live
As these colours may not correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE
or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED. On no account connect either of these wires to the terminal marked E or by the earth
symbol or coloured green or green and yellow.
English
4
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major
factor in the design of every instrument. But, safety is your responsibility too.
This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/
recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy
place for future reference.
INSTALLATION
1 Read and Follow Instructions — All the safety and
operating instructions should be read before the
video product is operated. Follow all operating and
use instructions.
2 Retain Instructions — The safety and operating
instructions should be retained for future reference.
3 Heed Warnings — Comply with all warnings on the
video product and in the operating instructions.
4 Power Sources — This video product should be
operated only from the type of power source indicated
on the marking label. If you are not sure of the type of
mains supply to your home, consult your video dealer
or local power company. For video products intended
to operate from battery power, or other sources, refer
to the operating instructions.
5 Overloading — Do not overload wall outlets and
extension cords as this can result in a risk of fire or
electric shock. Overloaded AC outlets and extension
cords are dangerous, and so are frayed mains leads,
damaged or cracked wire insulation and broken
plugs. They may result in a shock or fire hazard.
Periodically examine the cord and have it replaced by
your service technician if appearance indicates
damage or deteriorated insulation.
6 Mains Lead Protection — Mains leads should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them,
paying particular attention to leads at plugs,
convenience receptacles, and the point where they
exit from the appliance.
7 Ventilation — Slots and openings in the cabinet are
provided for ventilation to ensure reliable operation of
the video product and to protect it from overheating.
These openings must not be blocked or covered. The
openings should never be blocked by placing the
video product on a bed, sofa, rug, or other similar
surface. This video product should never be placed
near or over a radiator or heat register. This video
product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation
is provided or the video product manufacturer’s
instructions have been followed.
8 Attachments — Do not use attachments unless
recommended by the video product manufacturer as
they may cause hazards.
Caution: Maintain electrical safety. Powerline operated
equipment or accessories connected to this unit should
bear the UL listing mark or CSA certification mark on the
accessory itself and should not have been modified so as
to defeat the safety features. This will help avoid any
potential hazard from electric shock or fire. If in doubt,
contact qualified service personnel.
9 Water and Moisture — Do not use this video product
near water — for example, near a bath, wash bowl,
kitchen basin, or laundry tub, in a wet basement, or
near a swimming pool, and the like.
10 Accessories — Do not place this video product on an
unstable cart, stand, tripod, bracket, or table. The
video product may fall, causing serious injury to a
child or adult, and serious damage to the appliance.
Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
video product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
11 An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
English
5
12 Power Lines An outside antenna system should
not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be
taken to keep from touching or approaching such
power lines or circuits as contact with them might be
fatal. Installing an outdoor aerial can be hazardous
and should be left to a professional aerial installer.
USE
13 Cleaning — Unplug this video product from the wall
outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
14 Object and Liquid Entry — Never push objects of
any kind into this video product through openings as
they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never
spill liquid of any kind on the video product.
15 Lightning — For added protection for this video
product during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the aerial
or cable-system. This will prevent damage to the
video product due to lightning and power-line surges.
SERVICE
16 Servicing — Do not attempt to service this video
product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
17 Conditions Requiring Service — Unplug this video
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions.
a. When the mains lead or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the video product.
c. If the video product has been exposed to rain or
water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions. Improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the video product to its normal
operation.
e. If the video product has been dropped or the
cabinet has been damaged.
f. When the video product exhibits a distinct
change in performance — this indicates a need
for service.
18 Replacement Parts — When replacement parts are
required, have the service technician verify that the
replacements he uses have the same safety
characteristics as the original parts. Use of
replacements specified by the video product
manufacturer can prevent fire, electric shock or other
hazards.
19 Safety Check — Upon completion of any service or
repairs to this video product, ask the service
technician to perform safety checks recommended
by the manufacturer to determine that the video
product is in safe operating condition.
20 Heat — The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat.
English
6
Cautions When Using
Handle the liquid crystal display (LCD) with care:
The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with a
sharp object.
If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear soon,
turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again.
Do not place the DVD video camera/recorder with the open LCD screen down.
Close the LCD monitor when not using the DVD video camera/recorder.
Liquid crystal display (LCD) and viewfinder:
The LCD screen and viewfinder are the products of highly precise technology. Among the total number
of pixels (approx. 120,000 pixels for LCD monitor and approx. 110,000 pixels for viewfinder), 0.01% or
less pixels may be missing (black dots) or may remain lit as coloured dots (red, blue, green). This shows
the limitations of the current technology, and does not indicate a fault that will interfere with recording.
The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video camera/
recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal
brightness will be restored when the temperature inside the DVD video camera/recorder rises.
Hold the DVD video camera/recorder correctly:
Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The
viewfinder or LCD monitor could detach and the DVD video camera/recorder may fall.
Do not subject the DVD video camera/recorder to impact:
This DVD video camera/recorder is a precision machine. Take great care that you do not strike it
against a hard object or let it fall.
Do not use the DVD video camera/recorder on a tripod in a place where it is subject to severe vibrations
or impact.
No sand or dust!
Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause
malfunctions or defects.
No water or oil!
Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric
shock, malfunctions or defects.
English
7
Heat on surface of product:
The surface of the DVD video camera/recorder will be slightly warm, but this does not indicate a fault.
Screen on connected TV:
Never leave the disc navigation screen, still image or camera image displayed on your TV to which the
DVD video camera/recorder is connected: Doing so could result in displayed image retention or
phosphor degradation of TV screen.
Be careful of ambient temperature:
Using the DVD video camera/recorder in a place where the temperature is over 40°C or under 0°C will
result in abnormal recording/playback.
Take care that the temperature of this DVD video camera/recorder, when connected to PC does not
rise excessively (reference for usage: approx. 30 minutes at about 30ºC).
Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle where the
temperature is very high for a long time: This could cause malfunctions.
Do not point directly at the sun:
If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction or
a fire could occur.
Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This
could cause malfunctions.
Do not use the DVD video camera/recorder near TV or radio:
This could cause noise to appear on the TV screen or in radio broadcasts.
Do not use the DVD video camera/recorder near strong radio waves or magnetism:
If the DVD video camera/recorder is used near strong ra dio waves or magnetism, such as near a radio
wave tower or electric appliances, noise could enter video and audio that are being recorded. During
playback of normally recorded video and audio, noise may also be present in picture and sound.
At worst the DVD video camera/recorder could malfunction.
Do not expose the DVD video camera/recorder to soot or steam:
Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.
Do not use the DVD video camera/recorder near corrosive gas:
If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated by
petrol or diesel engines, or corrosive gas such as hydrogen sulfide, the external or internal terminals
could corrode, disabling normal operation, or the battery connecting terminals could corrode, so that
power will not turn on.
Do not use the DVD video camera/recorder near ultrasonic humidifier:
With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the air,
and white particles could adhere to the optical head of the DVD video camera/recorder, which could
cause it to operate abnormally.
Do not expose the DVD video camera/recorder to insecticide:
Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block, and
in such a case the DVD video camera/recorder might not operate normally. Turn the DVD video
camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.
Do not use a generally available 8 cm CD lens cleaner:
Cleaning the lens is not necessary when using this DVD video camera/recorder in the usual way.
Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.
English
8
Be careful of moisture condensation:
When you move the DVD video camera/recorder between places where the difference in
temperatures is great - such as entering a lodge from a ski slope or going out of a cooled room or vehicle
- condensation (vapour in air warmed or cooled to water droplets) could occur on the lens and/or
inside the DVD video camera/recorder. If condensation occurs, do not open the cover of disc or card
insertion block if possible. If condensation occurs on the lens, wipe it off with a soft, dry cloth. Even
if the external surface of DVD video camera/recorder has dried, condensation may remain inside:
Turn the DVD video camera/recorder off and leave it in a dry place for at least 1-2 hours before using
it again.
Do not use the DVD video camera/recorder for a long uninterrupted period of time:
This DVD video camera/recorder cannot be used for a long time continuously as a surveillance
camera/monitor. If you use the DVD video camera/recorder for a long continuous period of time, the
temperature of DVD video camera/recorder could exceed a limit and the recording/playback
operation could be slowed down: In this case, turn it off and wait for a while before using it again.
Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or
CARD ACCESS indicator is lit or blinking:
The ACCESS/PC or CARD ACCESS indicator is lit or
blinking to show that data is being written to disc or card, or
being read from it. At this time, do not do any of the
following, so as not to damage the data:
Remove battery
Disconnect AC adapter/charger
Plug or unplug PC connection cable
Remove disc or card
Subject DVD video camera/recorder to severe vibrations
or impact.
Violently open or close the LCD monitor
If you turn the DVD video camera/recorder off while the ACCESS/PC or CARD ACCESS indicator is
lit or blinking, turn it on again with the disc or card loaded in it: Repair of the disc or card will be executed
automatically (see page 152).
Do not wipe the DVD video camera/recorder case with benzene or thinner:
The coating of case could peel off or the case surface could deteriorate.
When using a chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
For optional accessories, observe the cautions and follow instruction manuals attached.
CARD
ACCESS
indicator
ACCESS/PC
indicator
English
9
Cautions When Storing
Do not leave the DVD video camera/recorder in a place where the temperature is very
high for a long period of time.
The temperature inside a closed vehicle or boot can become very high in a hot season. If you leave the
DVD video camera/recorder in such a place, it could malfunction or the case could be damaged. Also,
do not expose the DVD video camera/recorder to direct sunlight or place it near a heater.
Do not store the DVD video camera/recorder in a place where the humidity is high or
in a dusty place:
Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high, the
lens could be mouldy, and the DVD video camera/recorder could become inoperable. It is
recommended that you put the DVD video camera/recorder with desiccant in a box when storing it
in a closet, etc.
Do not store the DVD video camera/recorder in a place subject to strong magnetism
or intense vibrations:
This could cause malfunctions.
Detach the battery from the DVD video camera/recorder and store it in a cool place:
Leaving the battery attached or storing it at high temperature could shorten its life.
Suggestions and Restrictions
Make a trial recording:
Always make a trial recording before doing actual recording to make sure that recording is normal. The
data that have not been stored normally because of a defect in the DVD video camera/recorder cannot
be restored.
It is recommended that you use DVD-RAM disc from which recorded contents can be deleted for trial
recording.
Do not use the DVD video camera/recorder for professional applications:
This DVD video camera/recorder is designed and produced for home-use recording and playback.
The recorded contents cannot be compensated for:
Hitachi cannot compensate for any damages caused when recording is not made normally or recorded
contents cannot be played back because of a defect in the DVD video camera/recorder, disc or card.
Also, Hitachi cannot be responsible for your recorded video and audio.
If you or a third party make a mistake when handling this DVD video camera/recorder, disc, card, etc.,
the recorded contents may be lost. We cannot be responsible for compensation for damage due to loss
of recorded contents.
Copyright:
Data recorded on the disc or card in this DVD video camera/recorder using other digital/analogue
media or devices are protected by the copyright act and cannot be used without permission of the
owner of copyright, except for personal enjoyment. Be aware that recording is restricted for some
demonstrations, performances and exhibitions, even for personal enjoyment.
English
10
Read This First
To guide you, we've included following six chapters.
The section on “Setups” explains how to set up
the DVD video camera/recorder, battery, and
set the date/time.
The section on “Basic Techniques” explains the
basic operation of this DVD video camera/
recorder - recording of movies, still images and
playback of recorded images.
The section on “Advanced Techniques” explains
settings on this DVD video camera/recorder for
more advanced usage.
The section on “Disc Navigation” explains
editing with Disc Navigation: Refer to this
section when finalising DVD-R disc and
initialising DVD-RAM disc.
The section on “Connecting to PC” explains the
contents of provided CD-ROM and how to
install the software included.
“Subsidiary Information” includes an
introduction to products sold separately, proper
cleaning, and troubleshooting.
We want this manual to be as helpful as possible,
so it includes two easy ways to find the information
you need:
A quick index for the information you use most
often (this page).
A detailed table of contents directing you to
specific information quickly (see page 13-17).
Get to know your DVD video camera/recorder by
using this manual, and get to know Hitachi. We
appreciate your business.
Quick Index
Available Discs.................................................24
Recording Movie.............................................. 46
Playing Back ....................................................55
Connecting to a TV ..........................................72
Functions Available with Disc Navigation.........97
Connecting to PC........................................... 128
About This Manual
Displays in this manual
Understand that the displays are different from those you will actually see in the viewfinder or on the
LCD screen.
Notation of cancel button
Press the stop/cancel button to stop your operation midway, or return the menu screen to the preceding
one. The expression “press the C button” will be used in this text.
1, 2 and 3 marks beside headings
Some functions of this DVD video camera/recorder are unavailable with disc or card used. Refer to the
marks at right above each function to identify whether the disc or card is compatible with the function.
Refer to these marks and identify the functions and operation to match the disc or card you use.
With this DVD video camera/recorder you can view the picture being recorded or the playback picture
whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor switches the picture
to appear on the LCD monitor or in the viewfinder. The following text describes the operation assuming that
the viewfinder is used as a major monitor device.
It is possible to switch the language in the on-screen display of this DVD video camera/recorder (see
page 91).
English
11
Introduction
You can start recording immediately after stopping playback (P.46, 55)
Unlike tape devices, you do not need to search for the recording start position or locate the beginning
of blank portion.
You can stop playback and immediately start recording: New recording will not overwrite any
previously recorded data.
You can immediately play back desired recorded scenes (P.95)
You do not need to rewind, unlike recorders using tape.
You can select any scene you want and immediately play it back (using Disc Navigation function).
You can easily print without PC (P.108)
Use DPOF to set the photos to be printed and the print number among the photos recorded on SD
memory card or MultiMediaCard: This is useful when printing photos on a printer conforming to SD
memory card or when asking a photo lab to print them.
Use Disc Navigation to create your original movie (P.114)
You can delete unnecessary scenes, move any scenes, etc., and create your original movie work (Play
List).
If you stop playback midway and start recording, overwrite will not occur.
Recorded scenes
Before editing
After editing
English
12
You can easily edit scenes, which is
quite difficult with tape (P.77)
Using this DVD video camera/recorder, you can
collect scenes of your child, for example, on play
list of Disc Navigation function and create an
original movie: Then simply play back the play list
and dub it on VCR. It is also easy to make any
number of identical tapes.
Create original DVDs on PC (P.140)
You can use a DVD-R disc to create an original
DVD, using the provided software CD-ROM.
The created DVD disc can be played back on DVD
player, DVD-ROM drive, etc.
Up to now, you had to
repeatedly press
buttons
With DVD, you can simply
play back this DVD video
camera/recorder, and
press the record button on
VCR.
Original DVD being
created
Playback of DVD
English
13
Table of Contents
Important Information ........................................2
For Your Safety .................................................2
Precautions .......................................................2
IMPORTANT SAFEGUARDS ...........................4
Cautions When Using ........................................6
Cautions When Storing ......................................9
Suggestions and Restrictions.............................9
Read This First.................................................10
About This Manual ...........................................10
Introduction ......................................................11
Table of Contents.............................................13
Checking Provided Accessories.......................16
Names of Parts ................................................17
Try to Record and Play Back using Disc
(Video and Photo)..........................................20
Try to Record and Play Back using Card
(Photo)...........................................................22
Discs and Cards...............................................24
AVAILABLE DISCS ............................................. 24
INFORMATION ON DVD-R DISC ....................... 25
EXAMPLES OF DISCS THAT CANNOT
BE USED ON THIS DVD VIDEO CAMERA/
RECORDER: ....................................................25
HANDLING DISCS .............................................. 26
AVAILABLE CARDS............................................ 27
COMMON CAUTIONS FOR DISC AND CARD .. 27
Storage Capacity on Disc or Card....................28
RECORDABLE TIME OF MOVIE (VIDEO) .........28
RECORDABLE STILLS (PHOTOS) ON DISC ....28
RECORDABLE STILLS (PHOTOS) ON CARD...29
SIZE AND QUALITY OF PHOTOS......................29
Setups
Setting Up the DVD Video Camera/
Recorder........................................................30
HOLDING DVD VIDEO CAMERA/
RECORDER .....................................................30
ATTACHING SHOULDER STRAP...................... 31
ATTACHING LENS CAP .....................................31
VIEWING SUBJECT THROUGH
VIEWFINDER ................................................... 32
VIEWING IMAGE ON LCD MONITOR
SCREEN........................................................... 32
CLOSING LCD MONITOR ..................................33
SETTING DATE AND TIME ................................34
CHANGING DISPLAY FORMAT OF DATE
AND TIME......................................................... 35
Setting Up the Battery ......................................36
CHARGING BATTERY........................................ 36
ATTACHING BATTERY TO DVD VIDEO
CAMERA/RECORDER..................................... 37
REMOVING BATTERY........................................37
BATTERY REMAINING LEVEL INDICATOR......39
EFFICIENT USE OF BATTERY ..........................39
USING DVD VIDEO CAMERA/RECORDER
WITH AC ADAPTER/CHARGER......................40
Inserting and Removing Disc .......................... 41
INSERTING DISC................................................41
REMOVING DISC................................................43
Inserting and Removing Card.......................... 44
Basic Techniques
Basic Handling of DVD Video Camera/
Recorder....................................................... 45
TURNING DVD VIDEO CAMERA/
RECORDER ON AND OFF ..............................45
Recording Movie ............................................. 46
Recording Stills ............................................... 47
Compensating for Backlight ............................ 48
On-Screen Information.................................... 49
INFORMATION DISPLAY DURING
RECORDING ....................................................49
Zooming .......................................................... 53
MACRO RECORDING ........................................54
RECORDING SUBJECTS FOR STRONGER
WIDE-ANGLE OR TELEPHOTO EFFECT .......54
Playing Back.................................................... 55
PLAYING BACK ..................................................55
PLAYBACK FROM START OF DISC OR
CARD................................................................56
SEARCH PLAYBACK OF MOVIE .......................56
FRAME ADVANCE/FRAME BACK/SLOW
PLAYBACK OF MOVIE ....................................56
SKIP PLAYBACK OF MOVIE ..............................57
PLAYING BACK STILLS .....................................57
JUMPING TO SPECIFIED POINT (GO TO)........58
On-Screen Information Display ....................... 59
INFORMATION DISPLAY DURING
PLAYBACK.......................................................59
Checking Flow of Quick Mode......................... 60
Camera Functions
FLOW OF QUICK MODE WHEN RECORDING
MOVIE: .............................................................61
FLOW OF QUICK MODE WHEN RECORDING
PHOTO (DISC): ................................................62
FLOW OF QUICK MODE WHEN RECORDING
PHOTO (CARD):...............................................63
Disc Navigation Functions
FLOW OF QUICK MODE
(WITH DVD-RAM DISC):..................................64
FLOW OF QUICK MODE
(WITH DVD-R DISC): .......................................65
FLOW OF QUICK MODE
(WITH CARD): ..................................................66
English
14
Manually Focusing Subject..............................67
FOCUSING DURING RECORDING ................... 67
Adjusting Brightness of Image to be recorded
(Exposure)..................................................... 69
Using Full Auto Function.................................. 70
Using External Microphone.............................. 71
Viewing on TV Screen ..................................... 72
CONNECTING TO A TV ..................................... 72
VIEWING ON TV SCREEN ................................. 73
Playback on DVD Video Recorder/Player .......74
PLAYING BACK DVD-RAM DISC....................... 74
PLAYING BACK DVD-R DISC ............................ 74
Removing and Replacing from/in Round DVD
Holder............................................................ 75
HOW TO REMOVE DISC.................................... 75
REPLACING DISC IN ROUND DVD HOLDER... 76
WHEN THE HINGE OF ROUND DVD HOLDER
COMES OFF .................................................... 76
DISC CLEANING................................................. 76
Recording (Dubbing) Images........................... 77
RECORDING (DUBBING) IMAGES ON
OTHER VIDEO DEVICES ................................ 77
Advanced Techniques
Checking Flow of Normal Mode....................... 78
Camera Functions
Setting Up Camera Functions.......................... 81
SELECTING SHOOTING MODE TO MATCH
THE SUBJECT
(SWITCHING PROGRAMME AE MODE) ........ 81
ADJUSTING COLOUR (WHITE BALANCE) ....... 82
USING THE ELECTRONIC IMAGE
STABILISER (EIS)............................................ 84
REDUCING WIND NOISE DURING
RECORDING (MIC.FILTER) ............................ 84
SWITCHING TO 16:9 MODE .............................. 85
Setting Up Record Functions........................... 86
SWITCHING MOVIE QUALITY
(VIDEO MODE) ................................................ 86
SWITCHING QUALITY OF STILL IMAGE
(QUALITY)........................................................ 87
SELF-TIMER ....................................................... 87
SETTING ON-SCREEN DISPLAY OUTPUT
ON OR OFF (OSD OUTPUT)........................... 88
LCD Setup ....................................................... 89
SETTING BRIGHTNESS OF LCD SCREEN
(BRIGHTNESS)................................................ 89
SETTING COLOUR DENSITY OF LCD
SCREEN (COLOUR LEVEL)............................ 89
Initial Settings ..................................................90
SWITCHING OPERATING SOUND ON OR
OFF (BEEP)...................................................... 90
TURNING DVD VIDEO CAMERA/RECORDER
OFF AUTOMATICALLY (POWER SAVE)........90
TURNING RECORD LED ON OR OFF
(RECORD LED)................................................ 91
CHANGING DISPLAY LANGUAGE
(LANGUAGE) ................................................... 91
RESETTING MENU SETTINGS TO
DEFAULTS (RESET)........................................92
Disc Navigation
Using Disc Navigation......................................93
STARTING OR TERMINATING DISC
NAVIGATION.................................................... 93
PLAYING BACK FROM DISC NAVIGATION
SCREEN........................................................... 95
SELECTING MULTIPLE SCENES...................... 96
SELECTING CONSECUTIVE SCENES
TOGETHER......................................................96
FUNCTIONS AVAILABLE WITH DISC
NAVIGATION.................................................... 97
UNDERSTANDING FLOW OF DISC
NAVIGATION MENU ........................................98
Scene...............................................................99
DELETING SCENES (DELETE)..........................99
CHANGING IMAGES FOR THUMBNAILS
(EDIT - THUMBNAIL) .....................................101
PLAYING BACK BY SKIPPING SCENES
(EDIT - SKIP).................................................. 102
ARRANGING ORDER OF SCENES
(EDIT - MOVE) ............................................... 102
DIRECTING SCENES EFFECTIVELY
(EDIT - FADE) ................................................ 103
COMBINING MULTIPLE SCENES
(EDIT - COMBINE) .........................................104
DIVIDING MOVIES (EDIT - DIVIDE) .................105
COPYING STILLS ON DVD-RAM DISC TO
CARD (COPY) ................................................106
LOCKING SCENES ON CARD (LOCK)............107
DESIGNATING SCENES TO BE PRINTED
(DPOF) ...........................................................108
SELECTING SCENES USING MENU SCREEN
(SELECT) .......................................................109
DISPLAYING INFORMATION USING MENU
SCREEN (DETAIL).........................................110
Programme ....................................................111
WHAT IS “PROGRAMME”? ..............................111
SWITCHING TO THUMBNAIL DISPLAY OF
SPECIFIC DATE (SWITCH) ........................... 111
PLAYING BACK PROGRAMME (PLAY)...........112
CHANGING TITLE OF PROGRAMME
(TITLE)............................................................112
Play List .........................................................114
WHAT IS “PLAY LIST”?..................................... 114
CREATING NEW PLAY LIST (CREATE)..........114
SWITCHING TO DISPLAY OF EACH PLAY
LIST (SWITCH)...............................................115
PLAYING BACK A PLAY LIST (PLAY)..............115
ADDING SCENES TO PLAY LIST
(EDITING PLAY LIST) ....................................116
DELETING SCENES FROM PLAY LIST
(EDITING PLAY LIST) ....................................117
ADDING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST) ....................117
DELETING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST) ....................118
SELECTING SCENES USING SUBMENU
FOR EDITING (EDITING PLAY LIST)............118
English
15
ARRANGING ORDER OF SCENES (MOVE) ...119
CHANGING TITLE OF PLAY LIST (TITLE)....... 120
DELETING PLAY LIST (DELETE)..................... 120
Go To .............................................................121
TOP (END) ........................................................ 121
Disc or Card Management .............................122
VERIFYING REMAINING FREE SPACE ON
DISC OR CARD (CAPACITY) ........................122
PROTECTING DISC FROM WRITING
(PROTECT DISC)...........................................122
INITIALISING DVD-RAM DISC OR CARD
(FORMAT DISC. FORMAT CARD) ................123
UPDATING CONTROL INFORMATION OF
DVD-RAM DISC
(UPDATE CONTROL INFO.).......................... 124
FINALISING DVD-R DISC (FINALIZE DISC)....125
Others ............................................................126
DISPLAYING MOVIES OR STILLS
INDEPENDENTLY (CATEGORY) ..................126
PLAYING BACK SCENES REPEATEDLY
(REPEAT PLAY)............................................. 126
SLIDE SHOW (CONTINUOUS PLAYBACK OF
STILLS)........................................................... 127
Connecting to PC
THE FOLLOWING ARE AVAILABLE WHEN
CONNECTING TO PC.................................... 128
Contents on Provided CD-ROM.....................130
Installing Software..........................................132
DISPLAYING INSTALLER SCREEN.................132
INSTALLING USB DRIVER............................... 133
INSTALLING UDF DRIVER
(DVD-RAM DRIVER)...................................... 134
INSTALLING DVD-MovieAlbumSE ...................136
INSTALLING MyDVD ........................................ 138
Creating DVD Video on PC from DVD-RAM
Disc Recorded on DVD Video Camera/
Recorder......................................................140
Uninstalling Software .....................................142
UNINSTALLING USB DRIVER.......................... 142
DELETING OTHER APPLICATIONS................ 143
Cautions When Using DVD Video Camera/
Recorder by Connecting It to PC.................144
Subsidiary Information
Introduction to Optional Accessories..............145
CAMERA ACCESSORIES ................................145
POWER SUPPLY.............................................. 145
INFORMATION ON SQUARE ADAPTER......... 145
Cleaning.........................................................146
Changing Setting of Demonstration ...............147
Terminology ...................................................148
No DVD Video Camera/Recorder Operation -
Check the Following: ...................................151
Trouble Messages..........................................152
Troubleshooting .............................................159
System Reset.................................................166
Major Specifications ...................................... 167
Index.............................................................. 169
Be sure to read the following before opening
the package of CD-ROM ............................ 171
English
16
Checking Provided Accessories
Make sure that you have all the following accessories in package:
When using the DZ-MV1000E video camera/recorder, you will need a disc
packed in round DVD holder. Purchase these discs.
Battery (model DZ-BP14S):
Portable power supply for this DVD video
camera/recorder. Charge it before use.
AC adapter/charger (model DZ-ACS1):
Used to power the DVD video camera/
recorder from AC outlet, or charge battery.
DC power cord:
When powering the DVD video camera/
recorder from household AC outlet, use this
cord to connect the DVD video camera/
recorder and AC adapter/charger.
Mains lead:
Connect between household AC outlet and
AC adapter/charger.
AV/S output cable:
Used when viewing the picture played back
on the DVD video camera/recorder on TV
screen, or output video from/to another video
device.
Shoulder strap:
Attach to the DVD video camera/recorder to
hang it from shoulder.
Lens cap and lens cap string:
Attach the lens cap when not recording, to
protect the lens.
Software CD-ROM:
Use this CD-ROM when connecting the DVD
video camera/recorder to PC.
PC connection cable:
Use this cable when connecting the DVD
video camera/recorder to PC.
Maxell DRMH60.1P
8 cm DVD-RAM double-sided disc
Maxell DRH30.1P
8 cm DVD-R single-sided disc
English
17
Names of Parts
1 Lens cap string attachment hole (P. 31)
2 Recording indicator (P. 91)
The red indicator will light during recording.
3 Stereo microphone (P. 46)
4 Optical 18× zoom lens (P. 53)
5 Lens hood (P. 54)
Always remove this lens hood when using
generally available tele-conversion or wide-
conversion lens.
6 Zoom lever (P. 53)
Push the lever to the T side for telephoto, or to
the W side for wide-angle.
7 External microphone jack (P. 71)
8 AV output jack (P. 72)
9 2.5" type liquid crystal display (inside)
(P. 32)
10 QUICK MODE switch (P. 60)
To switch the menu display on screen between
Normal mode and Quick mode.
11 BATTERY EJECT switch (P. 37)
The BATTERY EJECT switch is located on the
bottom of this DVD video camera/recorder:
Slide it when removing the battery.
A/V
MIC
BATTERY EJECT
11
910
45 6
(Inside the cover)
(Bottom)
78
12 3
English
18
12 Viewfinder (P. 32)
13 Dioptre control (P. 32)
To adjust the focus of image appearing in the
viewfinder. (Pull out the viewfinder.)
14 ACCESS/PC indicator (P. 8, 46, 47)
Will blink or light when the disc in DVD video
camera/recorder is accessed (write or read is
executed) or the DVD video camera/recorder
is connected to PC.
15 DISC EJECT button (P. 41)
Press down and release this button to open the
disc guide.
16 Disc insertion block (P. 41)
17 CARD ACCESS indicator (P. 8, 47)
18 Card insertion block (P. 44)
19 Battery attachment platform (P. 37)
20 Record button (REC) (P. 46)
21 Power switch (P. 45, 46, 47)
22 LOCK switch (P. 47)
It is recommended that you set the LOCK
switch to (to the left) to prevent the power
switch in the “O VIDEO” position from
accidentally moving to “N PHOTO”.
23 Speaker (P. 55)
24 Hand strap (P. 30)
12 13 14 1815
19 20 22 2423
17
21
16
English
19
25 FULL AUTO button (P. 70)
To switch the DVD video camera/recorder to
full automatic.
26 FOCUS button (P. 67)
To switch between manual focus and auto-
focus.
27 EXPOSURE button (P. 69)
Press this button to adjust the exposure.
28 BLC (backlight compensation) button
(P. 48)
Press this button when subject is being lighted
from rear.
29 DISC NAVIGATION button (P. 93)
30 SELECT button (P. 96)
31 MENU button (P. 34, 80, 100)
Press this button to display the menu for setting
camera functions and Disc Navigation.
32 DISPLAY (Screen display) button (P. 59)
Press this button to display the details of image
being played back or camera setting status, or
switch the display off.
33 Volume control buttons (VOL)/ S R buttons
(P. 55, 67, 69)
To adjust the volume of sound from speaker,
etc.
34 RESET button (P. 166)
To reset all settings to defaults (status when the
DVD video camera/recorder was shipped
from the factory)
35 PC connection terminal (TO PC)
36 Joystick (P. 34, 55, 78, 80)
Move the joystick to select a scene or menu
item, and then press the centre (A) to play
back the scene, pause it, or designate an option
of the menu.
37 Stop/cancel button (P. 10, 55, 93)
To end playback or cancel setting of menu.
25 26 27 28 29 30 31
3733 34 35 3632
English
20
12
Try to Record and Play Back using Disc
(Video and Photo)
You can record both videos and photos on DVD-RAM disc; only videos on DVD-R disc.
Before You Begin
It is recommended that you use a DVD-RAM disc for trial recording, since
you can delete the recorded contents (P. 24).
1 Connect a power supply (P. 40).
4
1
3
2
Mains lead
AC adapter/charger
DC power cord
To AC outlet
2 Insert a disc (P. 41).
1Press down the DISC EJECT button once and
release it.
2Gently open the cover until it stops.
3Insert the disc, in Round DVD Holder, into
the disc guide properly until it stops, and then
close the cover of disc insertion block.
DISC EJECT
DISC EJECT button
Disc cover
PUSH CLOSE
portion
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174

Hitachi DZ-MV1000E Manuale utente

Categoria
Videocamere
Tipo
Manuale utente

in altre lingue