LevelOne WBR-6011 Quick Installation Manual

LevelOne

WBR-6002

N Wireless Router

Quick Installation Guide

English

Nederlands

Deutsch

Português

Dansk

Svenska

Español



Français



Italiano



2

Table of Contents

English ........................................................................ 3

Deutsch ..................................................................... 16

Dansk ........................................................................ 29

Español ..................................................................... 42

Français .................................................................... 55

Italiano ...................................................................... 68

Nederlands ............................................................... 81

Português ................................................................. 94

Svenska .................................................................. 107

 ............................................................ 120

 ................................................................. 133

 .................................................................. 146

3

English

Package Contents

 WBR-6002 N Wireless Router

 Power Adapter (12VDC, 1A)

 RJ-45 LAN Ethernet Cable

 Rubber Feet

 CD-ROM with User Manual

 Quick Installation Guide

If any of the above items are missing, please contact your retailer

or distributor.

4

Before You Begin

Please note the default settings listed below.

Default Settings

IP Address

192.168.0.1

User / Password

admin / password

Wireless Mode

Enable

Wireless SSID

WBR-6002

Security

None

This Quick Installation Guide only describes the most basic

situations and settings. Please consult the User Manual on the CD

for more details.

Please have your Internet Service Prov

or other connection details ready.

5

Installation

3. Connect your broadband internet connection



4. Connect the Computer LAN cable.

2. Attach the included antenna.

1. Please power off your ADSL / Cable modem by unplugging

the power adapter.

Internet

ADSL / Cable

Modem

6

6. Wait until the Power light remains on.

This means the router is ready for use.

5. Plug in the Power Adapter.

8. Installation is now complete. You can now begin to

configure the device.

7. Power back on your ADSL / Cable modem by plugging in the

power adapter.

7

Check Your Network Settings

(Windows XP / Vista)

1. Click the Start Button and open Control Panel.

Windows Vista, click

View Network Status and Tasks

then Manage Network Connections

2. Windows XP, double click

Network Connections

Windows XP

Windows Vista

8

3. Right click on Local Area

Connection and choose

Properties.

Note: The name could be

different due to different

Network Interfaces.

4. Check the Client for Microsoft Networks, File and Printer

Sharing, and Internet Protocol (TCP/IP) is ticked. If not,

please tick them.

9

6. Select these two options and click [OK].

5. Select Internet Protocol (TCP/IP) and

click [Properties]

10

Configuration

1. Shutdown and restart your computer.

2. Once restart is completed, start your WEB browser (Internet

Explorer recommended).

In the Address box, enter the following:

http://192.168.0.1

3. Enter the Username and Password when prompted.

Defaults

Username: admin

Password: password

11

4. You can select the language you want on the left drop down

menu.

5. To set up the router, please click on the Setup Wizard on the

left menu.

6. Please have your Internet Service



and other connection details

ready.

Then follow the steps of the

wizard to complete the setup.

12

8. You can set your Wireless network

name (SSID) and security

encryption.

7. To set wireless settings, please

click Wireless and then

Options.

13

9. LevelOne recommends WPA2-PSK AES for maximum

wireless security. Please ensure that the same network

security settings are used on both the router and wireless

client.

Please type your passkey in the PSK field.

14

Troubleshooting

1. I cannot connect to the wireless router to start

configuration.

Check that you have connected the cable correctly between



computer is set to obtain an IP Address via DHCP (see above).

2. I cannot connect to the Internet.

Try to turn off the router and your ADSL/Cable modem. Wait 30

seconds and then turn the devices back on. If you still have



check whether the router has obtained an Internet IP Address

in the Status page.

If the above does not work, please contact your Internet

Service Provider to check whether there are any problems with

the connection or settings.

15

3. I cannot connect to the wireless network.

Check whether the SSID network name and wireless security

are the same on both the client and router. If you still have

problems, then power off and on your router and restart your

computer.

Your last solution will be forced to reset the router to factory

default settings.



ON. Then press and hold the WPS and WLAN buttons for more

than 10 seconds until you see the Power light blink 2 times,

then release the buttons. The router is now reset to factory

defaults.

16

Deutsch

Lieferumfang

 WLAN-Router WBR-6002 N

 Netzteil (12 V Gleichspannung, 1 A)

 RJ-45-Kabel (LAN/Ethernet)

 Gummifüße

 CD mit Bedienungsanleitung

 Kurzinstallationsanleitung

Falls etwas fehlen sollte, wenden Sie sich bitte an Ihren Händler

oder Distributor.

17

Bevor Sie loslegen

Bitte beachten Sie die nachstehenden Standardeinstellungen.

Standardeinstellungen

IP-Adresse

192.168.0.1

Benutzername/Kennwort

admin / password

WLAN-Modus

Aktivieren

WLAN-SSID

WBR-6002 N

Sicherheit

/

In dieser Kurzinstallationsanleitung gehen wir lediglich auf absolut

grundlegende Situationen und Einstellungen ein. Detaillierte

Informationen finden Sie in der vollständigen Bedienungsanleitung

auf der CD.

Bitte halten Sie Ihre Internet-Zugangsdaten und weitere Angaben

zur Verbindung bereit.

18

Installation

3. Schließen Sie Ihre Breitband-Internetverbindung

an den WAN-Port des WLAN-Routers an.

4. Schließen Sie das LAN-Kabel an.

Computer an.

2. Schließen Sie die mitgelieferte Antenne an.

1. Bitte schalten Sie Ihr (A)DSL-/Kabelmodem aus, indem Sie

den Netzstecker ziehen.

(A)DSL-/Kabel

modem

Internet

19

5. Stecken Sie das Netzteil ein.

6. Warten Sie ab, bis die Betriebsanzeige-LED dauerhaft

leuchtet. Der Router ist betriebsbereit.

8. Die Installation ist nun abgeschlossen. Nun können Sie mit

der Konfiguration des Gerätes beginnen.

7. Schalten Sie Ihr (A)DSL-/Kabelmodem wieder ein, indem Sie

den Netzstecker wieder einstecken.

20

Netzwerkeinstellungen prüfen

(Windows XP / Vista)

1. Klicken Sie auf den Start Button (Start-Schaltfläche) unten

links und öffnen Sie die Control Panel (Systemsteuerung).

Unter Windows Vista klicken Sie auf Start, Systemsteuerung,

View Network Status and Tasks (Netzwerkstatus und

-aufgaben anzeigen), anschließend klicken Sie auf Manage

Network Connections (Netzwerkverbindungen verwalten).

2. Unter Windows XP

doppelklicken Sie auf

Network Connections

(Netzwerkverbindungen).

Windows XP

Windows Vista

La pagina si sta caricando...

LevelOne WBR-6011 Quick Installation Manual

Questo manuale è adatto anche per

LevelOne WBR-6011 Quick Installation Manual

in altre lingue

Documenti correlati

Altri documenti