Rockford Fosgate M1WL-65MB Istruzioni per l'uso

Marca: Rockford Fosgate

Modello: M1WL-65MB

Tipo: Istruzioni per l'uso

600 South Rockford Drive • Tempe, Arizona 85281 United States

Direct: (480) 967-3565 • Toll Free: (800) 669-9899

rockfordfosgate.com

02252021 1230-74972-01-B Printed In China

Installation assistance available at:

M1WL-65MB

M2WL-65MB

Installation & Operation

COLOR OPTIX™ MOTO-CANS

Dear Customer,

Congratulations on your purchase of the world’s finest brand of audio

products. At Rockford Fosgate we are fanatics about musical reproduc-

tion at its best, and we are pleased you chose our product. Through

years of engineering expertise, hand crasmanship and critical testing

procedures, we have created a wide range of products that reproduce

music with all the clarity and richness you deserve.

For maximum performance we recommend you have your new Rock-

ford Fosgate product installed by an Authorized Rockford Fosgate

Dealer. Please read your warranty and retain your receipt and original

carton for possible future use.

Great product and competent installations are only a piece of the

puzzle when it comes to your system. Make sure that your installer is

using 100% authentic installation accessories from Rockford Fosgate in

your installation. Rockford Fosgate has everything from RCA cables and

speaker wire to power wire and battery connectors. Insist on it! Aer

all, your new system deserves nothing but the best.

To add the finishing touch to your new Rockford Fosgate image, order

your Rockford accessories, which include everything from T-shirts to

hats.

Visit our web site for the latest information on all Rockford products;

www.rockfordfosgate.com

or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all

other countries, call +001-480-967-3565 or FAX +001-480-966-

3983.

Table of Content

If, aer reading your manual, you still have questions regarding

this product, we recommend that you see your Rockford Fosgate

dealer. If you need further assistance, you can call us direct at

1-800-669-9899. Be sure to have your serial number, model num-

ber and date of purchase available when you call.

Safety

This symbol with “WARNING” is intend-

ed to alert the user to the presence of

important instructions. Failure to heed

the instructions could result in severe

injury or death.

This symbol with “CAUTION” is intend-

ed to alert the user to the presence of

important instructions. Failure to heed

the instructions could result in injury

or unit damage.

• To prevent injury and damage to the unit, please read and

follow the instructions in this manual.

• If you feel unsure about installing this system yourself, have

it installed by a qualified Rockford Fosgate technician.

• Before installation, disconnect the battery negative (-)

terminal to prevent damage to the unit, fire and/or possible

injury.

Introduction

2 Introduction

3 Speciﬁcations

4-5 Diagrams

6Wiring

Installation Considerations

Mounting

7-8 Additional Languages

French

Spanish

German

Italian

12 Limited Warranty Information

PRACTICE SAFE SOUND

Continuous exposure to sound pressure levels over 100dB may cause

permanent hearing loss. High powered auto sound systems may

produce sound pressure levels well over 130dB. Use common sense

and practice safe sound.

PRATIQUEZ UNE ÉCOUTE SANS RISQUES

Une exposition continue à des niveaux de pression acoustique upérieurs à

100 dB peut causer une perte d’acuité auditive permanente. Les systèmes

audio de forte puissance pour auto peuvent produire des niveaux de

pression acoustique bien au-delà de 130 dB. Faites preuve de bon sens et

pratiquez une écoute sans risques

PRACTIQUE EL SONIDO SEGURO

El contacto continuo con niveles de presión de sonido superiores a 100

dB puede causar la pérdida permanente de la audición. Los sistemas de

sonido de alta potencia para automóviles pueden producir niveles de

presión de sonido superiores a los 130 dB. Aplique el sentido común y

practique el sonido seguro.

PRAKTIZIEREN SIE SICHEREN SOUND

Fortgesetzte Geräuschdruckpegel von über 100 dB können beim

Menschen zu permanentem Hörverlust führen. Leistungsstarke

Autosoundsysteme können Geräuschdruckpegel erzeugen, die weit über

130 dB liegen. Bitte wenden Sie gesunden Menschenverstand an und

praktizieren Sie sicheren Sound.

OSSERVATE LE REGOLE DEL SUONO SENZA PERICOLI

La costante esposizione a livelli di pressione acustica al di sopra dei

100dB possono causare la perdita permanente dell’udito. I sistemi

audio ad alta potenza possono produrre livelli di pressione acustica ben

superiori ai 130dB. Si consiglia il buon senso e l’osservanza delle regole

del suono senza pericoli

of Rockford Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Specifications

subject to change without notice.

Speciﬁcations

Model M1WL-65MB M2WL-65MB

Nominal Diameter - inch

(mm)

6.5

(165mm).

6.5

(165mm).

Description 2-Way 2-Way

Nominal Impedance (Ohms) 4Ω 4Ω

Frequency Response (Hz) 38-22kHz 40-24kHz

Power Handling - Watts

(RMS/Peak) 75/300 150/600

Sensitivity (2.83V/1M) 92dB 92dB

Grille/Trim Ring YES (mounted) YES (mounted)

LED Current Draw .25 Amps .25 Amps

Recommended Fused Rating 1 Amp 1 Amp

LED Voltage Range 9-16 Volts 9-16 Volts

Overall Speaker (A) 7.11”

(180.5mm)

7.11”

(180.5mm)

Bolt Diameter (B) 6.12”

(155.5mm)

6.12”

(155.5mm)

Overall Height (C) 9.57”

(243.2mm)

9.57”

(243.2mm)

Overall Length (D) 8.16”

(207.3mm)

8.16”

(207.3mm)

*Rockford Fosgate determines its rated frequency response range at -6 dB below its nominal sensitivity

at upper and lower extents of a speaker’s output.

M1/M2 Moto Can Dimensions

VERIFIED WITH KLIPPEL

To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained

and certified by Klippel prior to using the three separate Klippel systems to design, develop and test. Rockford Fosgate

has made the investment in Klippel to deliver the best possible speakers and subwoofers to their customers.

illus.-1.1

Diagrams

Speaker Adjustment

Remove the speaker to

reveal the multi-point

mounting option to make

sure your speaker is

mounted correctly. No

matter what direction the

speaker is mounted, it

should always look like the

image above.

3°

illus.-3.1

Rear Medallion Rotation Rotate Medallion to look like

image aer mounting Wake Cans

The bottom of the Diamond R

should be down like the image

when mounted

illus.-3.2

Grill Options (Included)

illus.-2.1 M2 only

Insert covered

wire harness

wiring port.

Wiring

illus.-4.2

Rotation Lock-down

Use included Safety Torx Wrench

to tighten can to clamp to keep

Wake Can from swivling.

*If the cap does not fully snap in aer

tightening, then the bolt is not tight

enough.

Remove

plastic plug

to access

rotation lock-

down torx.

illus.-3.3

Diagrams

Contents

Installation Considerations

Before beginning any installation, follow these simple rules:

1. Be sure to carefully read and understand the instructions

before attempting to install these speakers.

2. For safety, disconnect the negative lead from the battery

prior to beginning the installation.

3. For easier assembly, we suggest you run all wires prior to

mounting your speakers in place.

4. Use high quality connectors for a reliable installation and

to minimize signal or power loss.

5. Think before you drill! Be careful not to cut or drill into gas

tanks, fuel lines, brake or hydraulic lines, vacuum lines or

electrical wiring when working on any vehicle. If installation

in a boat, take care not to cut or drill through the main hull.

6. Never run wires underneath the vehicle. Running the wires

inside the vehicle or hull area provides the best protection.

7. Avoid running wires over or through sharp edges. Use

rubber or plastic grommets to protect any wires routed

through metal, especially the firewall.

• (1) Pair Moto Can Speakers

• (1) Pair Universal Clamps

• (4) Grommets

• (4) Safety Inserts for Screw

Clamp

• (2) 1” to 1.6” Rubber Clamp

Inserts and Stainless

Hardware

• (2) 1.6” to 2” Rubber Clamp

Inserts and Stainless

Hardware

• (2) Speaker Harnesses

• (1) Pair Sport Grills

(Installed on M1)

• (1) Pair Sport Grills

(Installed on M2, not

available on M1)

• (1) Allen Bit For Speaker

Removal For Rotation

• (1) Safety Torx Wrench

Mounting

1. Determine where the speakers will be mounted. Be sure

that the mounting location has suicient clearance in all

direction for the speaker to swivel; conduct a full rotation to

ensure there is not obstruction.

2. Mark the location where the wiring will come out near

where the Moto can will be mounted. Drill a 7/16” hole in

the location you marked for your wire exit. The wiring will

connect to the rear of the can illus.-4.2.

3. Insert the supplied grommet and feed the wire harness

through. Be sure to observe proper polarity when

connecting the wires. The speaker harness’s negative wire

is the BLACK 18 AWG wire and the Positive is the RED 18 AWG

wire in the 6 pin connector illus.-4.3.

4. Remove the plastic cover over the safety torx bolt to allow

access to loosen/tighten the wake can. Do this to adjust

the angle of the wake can, then tighten the safety torx bolt

to make sure it does not move. Replace plastic cover over

safety torx bolt illus.-3.3.

5. Rotate the medalion on the rear of the wake can to look like

the image in illus.-3.2. This can be turned le or right to align

the medalion. You will hear/feel a clicking when you rotate

it.

6. If you need to rotate the speaker, remove the (6) screws

holding th speaker and grill on. Pull the speaker slightly

towards you and rotate it until it looks like illus.-1.1. Use the

predrilled holes to reinstall the speaker illus.-3.1.

Installation

(1)

(3)

(5)

(2)

(4)

(6)

14”

(355mm)

illus.-4.3

illus.-4.4

1 - BLACK (Speaker Negative, 18 AWG)

2 - YELLOW (12V + Input, 22 AWG)

3 - RED (Speaker Positive, 18 AWG)

4 - GREEN (Ground Input, 22 AWG)

5 - RED (Ground Input, 22 AWG)

6 - BLUE (Ground Input, 22 AWG)

Included with speakers

Connector is DEUTSCH™/Amphenol style DT06-4S

15”

(380mm)

Français Español

Considérations d’installation

Avant de commencer toute installation, suivez ces règles simples:

1. Assurez-vous de lire attentivement et de comprendre les instructions

avant de tenter d’installer ces enceintes.

2. Pour plus de sécurité, débranchez le ﬁl négatif de la batterie avant de

commencer l’installation.

3. Pour un assemblage plus facile, nous vous suggérons de faire passer

tous les ﬁls avant de monter vos enceintes en place.

4. Utilisez des connecteurs de haute qualité pour une installation ﬁable et

pour minimiser la perte de signal ou de puissance.

5. Réﬂéchissez avant de percer! Veillez à ne pas couper ou percer dans les

réservoirs d’essence, les conduites de carburant, les conduites de frein

ou hydrauliques, les conduites de vide ou le câblage électrique lorsque

vous travaillez sur un véhicule. En cas d’installation dans un bateau,

veillez à ne pas couper ou percer la coque principale.

6. Ne jamais faire passer les ﬁls sous le véhicule. Faire passer les ﬁls à

l’intérieur du véhicule ou dans la zone de la coque offre la meilleure

protection.

7. Évitez de faire passer les ﬁls sur ou à travers des arêtes vives. Utilisez des

œillets en caoutchouc ou en plastique pour protéger les ﬁls acheminés à

travers le métal, en particulier le pare-feu.

Montage

1. Déterminez où les haut-parleurs seront montés. Assurez-vous que

l’emplacement de montage dispose d’un dégagement sufﬁsant dans toutes les

directions pour que l’enceinte puisse pivoter; effectuer une rotation complète

pour s’assurer qu’il n’y a pas d’obstruction.

2. Marquez l’emplacement où le câblage sortira près de l’endroit où la moto

peut être montée. Percez un trou de 7/16 po à l’emplacement que vous avez

marqué pour la sortie du ﬁl. Le câblage se connectera à l’arrière de la boîte.

3. Insérez l’œillet fourni et faites passer le faisceau de câbles. Assurez-vous de

respecter la polarité lors de la connexion des ﬁls. Le ﬁl négatif du faisceau

d’enceintes est le ﬁl NOIR 18 AWG et le ﬁl positif est le ﬁl ROUGE 18 AWG

dans le connecteur à 6 broches.

4. Retirez le couvercle en plastique sur le boulon torx de sécurité pour permettre

l’accès pour desserrer / serrer la boîte de sillage. Faites cela pour ajuster

l’angle de la boîte de sillage, puis serrez le boulon torx de sécurité pour vous

assurer qu’il ne bouge pas. Remettez le couvercle en plastique sur le boulon

torx de sécurité.

5. Faites pivoter le médaillon à l’arrière de la canette de sillage pour ressembler

à l’image. Cela peut être tourné à gauche ou à droite pour aligner

le médaillon. Vous entendrez / ressentirez un clic lorsque vous le tournerez.

6. Si vous devez faire pivoter l’enceinte, retirez les (6) vis qui maintiennent

l’enceinte et la grille en marche. Tirez légèrement l’enceinte vers vous et

faites-la pivoter jusqu’à ce qu’elle ressemble. Utilisez les trous pré-

percés pour réinstaller l’enceinte.

Consideraciones para la instalación

Antes de comenzar cualquier instalación, siga estas simples reglas:

1. Asegúrese de leer detenidamente y comprender las instrucciones antes

de intentar instalar estos altavoces.

2. Por seguridad, desconecte el cable negativo de la batería antes de

comenzar la instalación.

3. Para facilitar el montaje, le sugerimos que pase todos los cables antes de

montar los altavoces en su lugar.

4. Utilice conectores de alta calidad para una instalación conﬁable y para

minimizar la pérdida de señal o energía.

5. ¡Piense antes de perforar! Tenga cuidado de no cortar ni perforar tanques

de gasolina, líneas de combustible, líneas de frenos o hidráulicas, líneas

de vacío o cableado eléctrico cuando trabaje en cualquier vehículo. Si

se instala en una embarcación, tenga cuidado de no cortar ni perforar el

casco principal.

6. Nunca coloque cables debajo del vehículo. Pasar los cables dentro del

vehículo o en el área del casco proporciona la mejor protección.

7. Evite pasar cables sobre o a través de bordes aﬁlados. Utilice arandelas

de goma o plástico para proteger los cables que atraviesan el metal,

especialmente el cortafuegos.

Montaje

1. Determine dónde se montarán los altavoces. Asegúrese de que la

ubicación de montaje tenga suﬁciente espacio libre en todas las

direcciones para que el altavoz gire; Realice una rotación completa para

asegurarse de que no haya obstrucciones.

2. Marque la ubicación donde saldrá el cableado cerca de donde se montará

el Moto. Taladre un agujero de 7/16 ”en la ubicación que marcó para la

salida del cable. El cableado se conectará a la parte trasera de la lata.

3. Inserte la arandela suministrada y pase el mazo de cables. Asegúrese de

observar la polaridad adecuada al conectar los cables. El cable negativo

del arnés del altavoz es el cable NEGRO 18 AWG y el positivo es el cable

ROJO 18 AWG en el conector de 6 clavijas.

4. Quite la cubierta de plástico sobre el perno Torx de seguridad para permitir

el acceso para aﬂojar / apretar la lata de vela. Haga esto para ajustar el

ángulo de la lata de estela, luego apriete el perno Torx de seguridad para

asegurarse de que no se mueva. Vuelva a colocar la cubierta de plástico

sobre el perno Torx de seguridad.

5. Gire el medallón en la parte posterior de la lata para que se parezca a la

imagen. Esto se puede girar hacia la izquierda o hacia la derecha

para alinear la medalla. Oirá / sentirá un clic cuando lo gire.

6. Si necesita girar el altavoz, retire los (6) tornillos que sujetan el altavoz

y la rejilla. Tire del altavoz ligeramente hacia usted y gírelo hasta que

parezca. Utilice los agujeros pretaladrados para reinstalar el

altavoz.

illus.-4.2

illus.-3.2

illus.-1.1

illus.-3.1

illus.-3.3

illus.-4.3

illus.-1.1

illus.-3.1

illus.-3.2

illus.-3.3

illus.-4.3

illus.-4.2

Deutsch

Einbauüberlegungen

Befolgen Sie vor Beginn einer Installation die folgenden einfachen Regeln:

1. Lesen und verstehen Sie die Anweisungen sorgfältig, bevor Sie versuchen,

diese Lautsprecher zu installieren.

2. Trennen Sie aus Sicherheitsgründen das Minuskabel von der Batterie, bevor

Sie mit der Installation beginnen.

3. Zur einfacheren Montage empfehlen wir, dass Sie alle Kabel verlegen, bevor

Sie Ihre Lautsprecher anbringen.

4. Verwenden Sie hochwertige Steckverbinder für eine zuverlässige Installation

und zur Minimierung von Signal- oder Stromausfällen.

5. Denken Sie nach, bevor Sie bohren! Achten Sie darauf, bei Arbeiten

an Fahrzeugen keine Gastanks, Kraftstofﬂeitungen, Brems- oder

Hydraulikleitungen, Vakuumleitungen oder elektrischen Leitungen zu

schneiden oder in diese zu bohren. Achten Sie beim Einbau in ein Boot

darauf, dass Sie den Hauptrumpf nicht durchschneiden oder durchbohren.

6. Führen Sie niemals Kabel unter dem Fahrzeug. Das Verlegen der Kabel im

Fahrzeug- oder Rumpfbereich bietet den besten Schutz.

7. Verlegen Sie keine Drähte über oder durch scharfe Kanten. Verwenden

Sie Gummi- oder Kunststofftüllen, um alle durch Metall verlegten Drähte,

insbesondere die Firewall, zu schützen.

Befestigung

1. Bestimmen Sie, wo die Lautsprecher montiert werden sollen.

Stellen Sie sicher, dass der Montageort in alle Richtungen

genügend Spiel hat, damit sich der Lautsprecher schwenken kann.

Führen Sie eine vollständige Rotation durch, um sicherzustellen,

dass keine Hindernisse vorhanden sind.

2. Markieren Sie die Stelle, an der die Verkabelung in der Nähe

der Montage der Moto-Dose herauskommt. Bohren Sie an

der Stelle, die Sie für Ihren Drahtausgang markiert haben,

ein 7/16-Zoll-Loch. Die Verkabelung wird an der Rückseite

der Dose angeschlossen illus.-4.2.

3. Setzen Sie die mitgelieferte Tülle ein und führen Sie den

Kabelbaum durch. Achten Sie beim Anschließen der Drähte auf die

richtige Polarität. Das Minuskabel des Lautsprecherkabels ist das

SCHWARZE 18-AWG-Kabel und das Pluskabel das ROTE 18-AWG-

Kabel im 6-poligen Stecker.

4. Entfernen Sie die Kunststoabdeckung über der Sicherheits-

Torx-Schraube, um den Zugang zum Lösen / Festziehen der

Nachlaufdose zu ermöglichen. Stellen Sie dazu den Winkel der

Nachlaufdose ein und ziehen Sie dann die Sicherheits-Torx-

Schraube fest, um sicherzustellen, dass sie sich nicht bewegt.

Bringen Sie die Kunststoabdeckung wieder an der Torx-

Sicherheitsschraube an.

5. Drehen Sie die Medaille auf der Rückseite der Nachlaufdose, um

wie im Bild zu sehen. Dies kann nach links oder rechts gedreht

werden, um die Medaille auszurichten. Sie hören /

fühlen ein Klicken, wenn Sie es drehen.

6. Wenn Sie den Lautsprecher drehen müssen, entfernen Sie die (6)

Schrauben, mit denen der Lautsprecher befestigt ist, und grillen

Sie weiter. Ziehen Sie den Lautsprecher leicht in Ihre

Richtung und drehen Sie ihn, bis er aussieht. Verwenden Sie die

vorgebohrten Löcher, um den Lautsprecher neu zu installieren.

Italiano

Considerazioni sull’installazione

Prima di iniziare qualsiasi operazione d’installazione, vi consigliamo

di seguire queste semplici regole:

1. Assicurarsi di leggere attentamente e comprendere le istruzioni

prima di tentare di installare questi altoparlanti.

2. Per sicurezza, scollegare il cavo negativo dalla batteria prima di

iniziare l’installazione.

3. Per un assemblaggio più semplice, ti suggeriamo di far passare

tutti i cavi prima di montare gli altoparlanti in posizione.

4. Utilizzare connettori di alta qualità per un’installazione aidabile

e per ridurre al minimo la perdita di segnale o di alimentazione.

5. Pensa prima di perforare! Fare attenzione a non tagliare o

perforare serbatoi del gas, tubi del carburante, tubi dei freni

o idraulici, linee del vuoto o cavi elettrici quando si lavora su

qualsiasi veicolo. In caso di installazione su un’imbarcazione, fare

attenzione a non tagliare o perforare lo scafo principale.

6. Non far passare mai i cavi sotto il veicolo. Il passaggio dei cavi

all’interno del veicolo o nell’area dello scafo fornisce la migliore

protezione.

7. Evitare di far passare i cavi sopra o attraverso bordi taglienti.

Utilizzare anelli di tenuta in gomma o plastica per proteggere i

cavi instradati attraverso il metallo, in particolare il firewall.

Montaggio

1. Determina dove verranno montati gli altoparlanti. Assicurarsi che

la posizione di montaggio abbia uno spazio suiciente in tutte le

direzioni per consentire all’altoparlante di ruotare; eseguire una

rotazione completa per assicurarsi che non vi siano ostruzioni.

2. Segna la posizione in cui uscirà il cablaggio vicino a dove verrà

montata la Moto can. Praticare un foro da 7/16 “nella posizione

contrassegnata per l’uscita del cavo. Il cablaggio si collegherà

alla parte posteriore della lattina.

3. Inserire il gommino in dotazione e far passare il cablaggio.

Assicurarsi di osservare la corretta polarità quando si collegano i

fili. Il cavo negativo del cablaggio dell’altoparlante è il cavo NERO

18 AWG e il positivo è il cavo ROSSO 18 AWG nel connettore a 6 pin.

4. Rimuovere il coperchio di plastica sopra il bullone torx di sicurezza

per consentire l’accesso per allentare / stringere la scia. Fai

questo per regolare l’angolo della scia, quindi stringi il bullone

torx di sicurezza per assicurarti che non si muova. Riposizionare il

coperchio di plastica sul bullone torx di sicurezza.

5. Ruota il medaglione sul retro della scia per assomigliare

all’immagine all’interno. Questo può essere ruotato a

sinistra oa destra per allineare il medaglione. Sentirai / avvertirai

un clic quando lo ruoterai.

6. Se è necessario ruotare l’altoparlante, rimuovere le (6) viti

che fissano l’altoparlante e la griglia. Tirare leggermente

l’altoparlante verso di sé e ruotarlo finché non sembra.

Utilizzare i fori preforati per reinstallare l’altoparlante.

illus.-3.1

illus.-1.1

illus.-3.2

illus.-3.3

illus.-4.3

illus.-4.2

illus.-4.3

illus.-3.3

illus.-3.2

illus.-1.1

illus.-3.1

Warranty

Rockford Corporation oers a limited warranty on Rockford Fosgate products on the following terms:

Length of Warranty

POWER Amplifiers – 2 Years

BMW® Direct Fit Speakers – 2 Years

PUNCH® & PRIME® Amplifiers – 1 Year

Speakers, Signal Processors, Accessories and Capacitors – 1 Year

All marine, motorcycle, motorsport products - 2 Years

Any Factory Refurbished Product – 90 Days (receipt required)

What is Covered

This warranty applies only to Rockford Fosgate products sold to consumers by authorized Rockford Fosgate dealers in the United

States of America. Products purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered

only by that country’s Distributor and not by Rockford Corporation.

Who is Covered

This warranty covers only the original purchaser of Rockford product purchased from an authorized Rockford Fosgate dealer in the

United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name,

dealer name, product purchased and date of purchase.

Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at

Rockford’s discretion.

What is Not Covered

1. Damage caused by accident, abuse, improper installation, operations, the, water (on non-Element Ready products).

2. Any cost or expense related to the removal or reinstallation of product.

3. Service performed by anyone other than Rockford or an authorized Rockford Fosgate service center.

4. Any product which has had the serial number defaced, altered, or removed.

5. Subsequent damage to other components.

6. Any product purchased outside the U.S.

7. Any product not purchased from an authorized Rockford Fosgate dealer. Refer to rockfordfosgate.com dealer locator for more

detail.

Limit on Implied Warranties

Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express

warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply.

No person is authorized to assume for Rockford Fosgate any other liability in connection with the sale of the product.

How to Obtain Service

Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any prod-

uct to Rockford Fosgate. You are responsible for shipment of product to Rockford.

EU Warranty

This product meets the current EU warranty requirements, see your Authorized dealer for details.

Drawing Title: MANUAL, OWNER, RF, MOTO CAN, M1WL-65MB/M2WL-65MB

Drawing/Part NO: 1230-74972

AINITIALRELEASE ENG.SERVICES

PROCESSEDBYDESCRIPTIONREV

VERSION‐REVISION 01‐B

ROCKFORD CORPORATION AND EMBODIES CONFIDENTIAL INFORMATION, TRADE SECRET

INFORMATION, AND/OR KNOW-HOW WHICH IS THE PROPERTY OF ROCKFORD CORPORATION. BY

ACCECPTING THIS DRAWING, THE RECIPIENT AGREES NOT TO PROVIDE, OR OTHERWISE MAKE

AVAILABLE, THE DRAWING, OR ANY INFORMATION OR KNOW-HOW EMBODIED THERE IN, TO ANY

THIRD PARTY WITHOUT PRIOR WRITTEN AUTHORIZATION.

BCHNAGEDWORDINGONFRONTCOVER

1.DOCUMENTHISTORY

ENG.SERVICES

  

Signature:

Email:

Signature:

Email:

Signature:

Email:

Kurt Chen (Mar 1, 2021 07:56 MST)

Kurt Chen

[email protected]

brad.marvi[email protected]

Ted Sardina (Mar 1, 2021 08:44 MST)

Ted Sardina

ted.sardi[email protected]

1230-74972-01-B

Final Audit Report 2021-03-01

Created: 2021-02-25

By: Richard Dudley ([email protected])

Status: Signed

Transaction ID: CBJCHBCAABAActd4jEalVye7mvzPGQQOK340T2OlTIwp

"1230-74972-01-B" History

Document created by Richard Dudley ([email protected])

2021-02-25 - 8:16:54 PM GMT- IP address: 204.126.173.136

Document emailed to Kurt Chen ([email protected]) for signature

2021-02-25 - 8:17:08 PM GMT

Email viewed by Kurt Chen ([email protected])

2021-03-01 - 2:56:28 PM GMT- IP address: 68.228.212.120

Document e-signed by Kurt Chen ([email protected])

Signature Date: 2021-03-01 - 2:56:45 PM GMT - Time Source: server- IP address: 68.228.212.120

Document emailed to Brad Marvin ([email protected]) for signature

2021-03-01 - 2:56:47 PM GMT

Email viewed by Brad Marvin ([email protected])

2021-03-01 - 3:33:40 PM GMT- IP address: 204.126.173.136

Document e-signed by Brad Marvin ([email protected])

Signature Date: 2021-03-01 - 3:33:53 PM GMT - Time Source: server- IP address: 204.126.173.136

Document emailed to Ted Sardina ([email protected]) for signature

2021-03-01 - 3:33:55 PM GMT

Email viewed by Ted Sardina ([email protected])

2021-03-01 - 3:43:53 PM GMT- IP address: 204.126.173.136

Document e-signed by Ted Sardina ([email protected])

Signature Date: 2021-03-01 - 3:44:33 PM GMT - Time Source: server- IP address: 204.126.173.136

Agreement completed.

2021-03-01 - 3:44:33 PM GMT

Rockford Fosgate M1WL-65MB Istruzioni per l'uso

Marca: Rockford Fosgate

Modello: M1WL-65MB

Tipo: Istruzioni per l'uso

Scarica il pdf

rapporto

in altre lingue

English: Rockford Fosgate M1WL-65MB Operating instructions
français: Rockford Fosgate M1WL-65MB Mode d'emploi
español: Rockford Fosgate M1WL-65MB Instrucciones de operación

Rockford Fosgate M1WL-65MB Istruzioni per l'uso

Rockford Fosgate M1WL-65MB Istruzioni per l'uso

in altre lingue

Documenti correlati