LA SOMMELIERE VIP265V Instructions For Use Manual

version: 3

VIP265V / VIP315V MULTIZONE

UK Instructions for use

FR Mode d’emploi

DE Bedienungsanleitung

ES Instrucciones para el uso

IT Manuale di istruzioni per l’uso

2

UK

For your own safety and for the proper utilisation of the appliance, read

this manual carefully, including the warnings and recommendations,

before installing the appliance and using it for the first time. In order to

avoid damage to the appliance and/or personal injury, persons using the

appliance should be fully familiar with its operation and safety functions.

Keep these recommendations close to the appliance, for future reference,

and ensure that the document is transferred with the appliance, if it is

sold or in the case of moving. This will ensure optimum operation of the

appliance.

To avoid any risk of injury, keep this manual. The manufacturer declines

any liability whatsoever in the case of operating/handling errors

concerning the appliance.

Safety of children and other vulnerable persons

• This appliance may be used by children aged 8 years and above,

and by persons who are physically, sensorially or mentally handicapped,

or who have not learned to use the appliance, providing they are

supervised by a person familiar with the appliance and who is aware of

the risks involved. Children should not be allowed to play with the

appliance. User cleaning and servicing operations should not be carried

out by children, unless they are more than 8 years old and are

supervised.

• Keep all packaging out of the reach of children, as there is a risk of

suffocation.

3

UK

• If you decide to scrap the appliance, disconnect it from the wall

socket, cut the connection cable (as close to the appliance as possible)

and remove the door, in order to prevent children playing with it, with

the resulting risk of electric shock or being trapped inside.

• If an appliance with a magnetic door seal is being replaced by

another appliance with a latch on the door or on the seal, ensure that

the latch is disabled before selling or scrapping the old appliance. This

will prevent the appliance from being transformed into a trap for

children.

• Keep the appliance and its power cable out of reach of children

less than 8 years old.

General safety

• CAUTION — This appliance is designed for home use.

• CAUTION — Never store inflammable substances, such as

aerosols, inside the appliance, as they could leak or release fluids.

• CAUTION — A damaged power cable should be immediately

replaced by the manufacturer or by a qualified retailer, in order to

avoid any risk of electric shock.

• CAUTION — Keep the ventilation openings well open and ensure

that air can circulate, especially if the appliance is recessed into a

wall.

• CAUTION — Do not damage the refrigerating circuit.

• CAUTION — Do not use electrical appliances inside the

4

UK

compartment, unless they are tolerated by the manufacturer.

• CAUTION — The refrigerating and insulating systems contain

inflammable gases. When the appliance is scrapped, it should be

deposited at an accredited collection centre. Do not expose the

appliance to fire.

Refrigerating fluid

The refrigerating circuit in the appliance uses refrigerating isobutane

(R600a), which is a highly inflammable natural gas and is therefore

dangerous for the environment. When transporting or installing the

appliance, ensure that no element of the refrigerating circuit is

damaged. The refrigerating fluid (R600a) is inflammable.

Caution: Fire risk

If the refrigerating circuit is damaged:

- Avoid open flames or any source of combustion.

- Ensure that the room in which the appliance is installed is well

ventilated.

It is dangerous to change the specification of the appliance in any way

whatsoever.

Damage to the power cable may cause a short circuit and/or electric

shock.

5

UK

Electrical safety

• We decline any liability in respect of incidents caused by poor

electrical installation.

• Do not extend the power cable. Do not use an extension cable, or

adapter, or multi-way socket.

• Check that the wall socket is not damaged. A wall socket in poor

condition may cause the appliance to overheat and explode.

• Check that the wall socket used for the appliance is properly

accessible.

• Never pull on the main power cable.

• Ensure that the appliance is always electrically earthed.

• If the wall socket is loose, do not connect the cable, as there is a

risk of electric shock or fire.

• Do not use the appliance if the interior lighting cover is not

installed.

• Disconnect the appliance before replacing the lighting bulb.

• The appliance operates on a single phase 220-240 V~ / 50 Hz

power supply. The appliance must be connected to an earthed

wall socket, in accordance with applicable recommendations.

• Do not attempt to replace a damaged power cable, contact your

6

UK

after-sales service.

• The power socket must be easily accessible but out of reach of

children. In case of doubt, contact your installation technician.

Daily utilisation

• Do not store inflammable substances or fluids inside the

appliance. This would create a risk of explosion.

• Do not operate other electrical equipment inside the appliance

(mixers, whirling rotor for ice cream, etc.).

• When disconnecting the appliance, grip the plug firmly and do not

pull on the cable.

• Do not expose the appliance to direct sunlight.

• Keep the appliance away from candles, luminaires and open

flames, in order to avoid fire risk.

• This appliance is only designed to store wines and drinks.

• The appliance is heavy. Be careful when moving it.

• If your appliance is equipped with castors, remember that these

are only designed to facilitate minor movements. Do not move

the appliance over long distances.

• Do not lean or climb on the appliance or its elements.

• In order to avoid falling objects and to prevent damage to the

appliance, do not overload the compartments of the appliance.

7

UK

Caution! Cleaning and servicing

• Before carrying out servicing, switch off the power supply and

disconnect the appliance.

• When cleaning the appliance, do not use metal objects, steam

systems, volatile fluids, organic solvents or abrasive substances.

• Do not use sharp or pointed objects to remove ice. Use a plastic

scraper.

Important information concerning installation!

• To ensure proper electrical connection, follow the

recommendations given in the present manual.

• Unpack the appliance and visually check that it is not damaged.

Do not connect a damaged appliance. Inform your retailer or

point of sale of any damage. In such a case, keep the packaging.

• It is recommended that the appliance be allowed to settle for at

least 4 hours before connecting the electrical power supply, so

that the compressor fluid feed is correct.

• Proper air circulation is necessary to avoid overheating. To ensure

sufficient ventilation, observe the installation recommendations

provided.

• In order to avoid fire risk, wherever possible, ensure that the

appliance is not in contact with walls or with any hot element

8

UK

EN

(compressor, condenser). Observe the installation

recommendations.

• The appliance should not be placed close to radiators or cooking

hot plates or gas rings.

• Check that electrical sockets remain accessible when the

appliance is installed.

POWER SAVING

To limit the electricity consumption of your appliance:

• Install it in an appropriate place (see “Installing your appliance”).

• Leave the doors open as little time as possible.

• Do not put food that is still hot into the appliance.

•To ensure that the appliance operates properly, clean the condenser

regularly (see “Routine servicing of your appliance”).

• Regularly inspect the door seals and ensure that they are still closing

properly. If this is not the case, contact your after-sales service.

Trouble shooting

• Any electrical work should be carried out by a qualified and

skilled technician.

• The appliance should be repaired by an accredited repair centre,

using only manufacturer’s original spare parts.

9

UK

The appliance is designed for home use only. The manufacturer declines

any liability whatsoever in the case of other utilisation.

PROTECTION OF THE ENVIRONMENT

The packaging materials with this appliance may be recycled.

Contribute to their recycling and to the protection of the environment by

depositing them in the specific municipal containers provided for this

purpose.

Your appliance also contains many materials that can be recycled. It

therefore bears the logo that informs you that scrapped appliances

should not be mixed with other waste. Thus, the appliance will be

recycled by the manufacturer, under optimum conditions, in compliance

with European directive 2002/96/EC relating to Waste Electrical and

Electronic Equipment. Contact your local municipal offices or your

retailer, to identify the nearest collection points for scrapped appliances.

Thank you for helping to protect the environment.

10

UK

R600a

Safety instructions

Caution: Do not obstruct the ventilation grills on the appliance.

Caution: Do not store explosive substances, such as aerosol cans

containing an inflammable propellant, in the appliance.

Caution: Do not damage the refrigerating circuit in the appliance.

Caution: The refrigerating units use isobutane (R600a), and

should not be placed close to ignition sources (for example,

electrical contacts that are exposed or open contacts that could

be closed by the refrigerating fluid in the event of a leak). The

refrigerating fluid type is specified on the power cabinet

identification plate.

Caution: Do not use electrical equipment in the compartments of

the appliance, unless they are of the type recommended by the

manufacturer.

11

UK

This appliance meets the requirements of all applicable European

directives and their amendments, and notably complies with the

following standards:

1907/2006 (REACH)

2011/65/EU (ROHS)

2006/95/EC relating to electrical safety

2004/108/EC relating to electro-magnetic compatibility

2008/48 relating to electro-magnetic fields

2010/30 and 1060/2010 relating to energy labels

CLASS 1 LED PRODUCT

12

UK

Get to know your wine cooler

Lock

Control panel

Lighting

Charcoal filter

Wooden shelf

Sealing strip

Door handle

Adjustable feet

fig.1

13

Climate class

Optimum room tem-

perature

SN +10 ºC to +32 ºC

N +16 ºC to +32 ºC

ST +18 ºC to +38 ºC

T +18 ºC to +43 ºC

UK

Contents

Installation and start-up

Warning ....................................................................... 2

Get to know your wine cooler .............. 12

Before

use ...........................................

13

Installation and start-up ..................... 13

Technical data ................................... 15

Operation and function ...................... 16

Defrosting, cleaning and

maintenance ..................................... 18

Fault finding ...................................... 19

Warranty, spare parts and service .... 20

Placement

For safety and operational reasons, the

appliance must not be installed outdoors.

The appliance should be placed on a level

surface in a dry, well ventilated room. Never

place the appliance close to sources of

heat such as cookers or radiators, and

avoid placing it in direct sunlight.

Ambient temperature

The climate class is stated on the

nameplate. This specifies the optimum

ambient temperature. Wine coolers with

winter position, however, function at

ambient temperatures as low as 6°C

Before use

On receipt, check to ensure that the

appliance has not been damaged during

transport. Transport damage should be

reported to the local distributor before the

wine cooler is put to use.

Remove the packaging. Clean the inside of

the cabinet using warm water with a mild

detergent. Rinse with clean water and dry

thoroughly (see cleaning instructions). Use a

soft cloth.

If during transport the appliance has been laid

down, or if it has been stored in cold

surroundings (colder than +5°C), it must be

allowed to stabilise in an upright position for at

least an hour before being switched on.

Installation

The surface on which the appliance is to be

placed must be level. Do not use a frame or

similar.

The appliance can be installed as a free-

standing unit against a wall, built into a

kitchen element, or lined up with other

appliances (figs 2-3).

14

600

UK

600

698

fig. 2

The appliance viewed from

above

If the appliance is placed beside a wall,

there must be sufficient room for its door

to be opened wide enough to allow the

shelves to be pulled out (fig. 4).

698

fig. 4

1075

698

fig. 3

Ventilation

It is important that the appliance be well

ventilated and that air can circulate unhin-

dered above, below and around it.

The figures below illustrate how the neces-

sary air circulation around the appliance can

be ensured (figs 5-6).

fig.5 fig.6

15

UK

Setting up

It is important that the appliance be abso-

lutely level. It can be levelled by screwing

the adjustable feet at the front of the appli-

ance up or down (figs 7).

Use a spirit level to check that the appliance is

absolutely level sideways.

fig. 7

Technical data

This device complies with relevant EU

directives including Low Voltage

Directive 2006/95 EEC and

Electromagnetic Compatibility

Directive 2004/108/EC

The rating plate provides various techni-

cal information as well as type and serial

number.

Max. 85 kg.

16

UK

Operation and function

fig. 8

Electronic control

The electronic control ensures that the

temperatures set at the top and at the bot-

tom of the appliance are maintained. This is

achieved by means of an advanced control

of the refrigeration system, the heating ele-

ment. The set temperature will be stored in

the event of power failure.

The electronic control has the following

functions:

● On/off switch

● Light switch

● Temperature setting

● Temperature indication

● Alarm for too high and too low tempera-

tures

Temperature indication

The display shows the set temperatures. The

upper digits of the display indicate the set

temperature at the top of the appliance, and

the lower digits of the display indicate the set

temperature at the bottom of the appliance.

Temperature setting

The thermostat is equipped with a child lock

device. This device is activated by pushing

the “up and down” buttons simultaneously.

After approx. 3 seconds “Pof” flashes in the

display. Then the actual temperatures are

shown as usual. In addition, the set tem-

peratures can be shown by pushing SET1

and SET2, respectively.

The child lock device is cancelled by push-

ing the “up and down” buttons simultane-

ously. After approx. 3 seconds “Pon” flashes

in the display, and the temperature can be

set.

Temperature setting at the top

of the appliance

Push SET1. Then the temperature at the top

of the appliance can be adjusted up and down

by means of the “up and down” but- tons. The

temperature can be adjusted from 17 to 19°C,

17

UK

Temperature setting at the

bottom of the appliance

Push SET2. Then the temperature at the

bottom of the appliance can be adjusted up

and down by means of the “up and down”

buttons. The temperature can be adjusted

from 7 to 9°C.

Advice

We advise you to put always a

temperature gap of 10°C between the

top and bottom of the appliance.

Alarm devices

There is a sub-alarm for the low-tempe-

rature sensor and an excess-alarm for

the high-temperature sensor.

The alarm consists of a beeper and a

warning on the display.

Alarm for high temperature: beep sound +

alternating display of “HtA” and actual

temperature

Alarm for low temperature: beep sound +

alternating display of “LtA” and actual

temperature

The alarm temperature depends on the

set points.

The beep sound can be cancelled by

pushing a random thermostat button. Push

the on/off button to erase the display alarm,

first for cancelling the alarm, then again for

restarting the compressor.

Light

To turn off the lights, press once

Multi -zone storage

Typical serving temperature settings for the

top and bottom sections are 17°C and 7°C

respectively. With these settings, a suitable

temperature gradient will be achieved in

the cabinet for the storage of various types

of wine distributed from top to bottom as

follows:

● heavy red wines +16 to +19°C

● rosé and light red wines +12 to +16°C

● white wines +10 to +12°C

● champagne and sparkling wines +6 to

+8°C

It is recommended that wine be served at a

temperature which is a couple of degrees

lower than the desired drinking temperature as

the wine will be warmed slightly when it is

poured into the glass.

18

UK

.

Defrosting, cleaning

and maintenance

Automatic defrosting

The wine cooler is defrosted

automatically. Defrost water runs

through a pipe and is collected in a tray

above the compressor where the heat

generated by the compressor causes it

to evaporate. The defrost water tray

should be cleaned at intervals.

Cleaning

Before cleaning the appliance, unplug it

from the main supply. The cabinet is best

cleaned using warm water (max. 65°C)

with a little mild detergent. Never use

cleaning agents that scour. Use a soft

cloth. Rinse with clean water and dry

thoroughly. The defrost water channel, in

which condensa- tion from the

evaporator runs, is located at the bottom

of the rear inside wall of the cabinet and

must be kept clean. Add a few drops of

disinfectant, e.g. Rodalon, to the defrost

water drain a couple of times a year, and

clean the drain using a pipe cleaner or

similar. Never use sharp or pointed

imple- ments.

The sealing strip around the door must

be cleaned regularly to prevent

discolouration and prolong service life.

Use clean water. After cleaning the

sealing strip, check that it continues to

provide a tight seal.

Dust collecting on the condenser on

the rear of the cabinet, the

compressor and in the compressor

compartment is best removed using

a vacuum cleaner.

19

UK

Fault finding

Fault Possible cause Remedy

The appliance not

working

The appliance is switched off.

Power failure; the fuse is blown;

the appliance is not plugged in

correctly.

Press the on/off switch.

Check that power is connected.

Reset the fuse.

Water collects in

the bottom of the

cabinet.

The defrost water pipe is

blocked.

Clean the defrost water channel

and the drain hole on the rear

wall of the cabinet.

Vibration or

bothersome noise.

The appliance is not level.

The appliance is resting against

other kitchen elements.

Containers or bottles inside the

cabinet are rattling against one

another.

Level the appliance using a spirit

level.

Move the appliance away from

the kitchen elements or appli-

ances it is in contact with.

Move containers and/or bottles

apart.

Compressor runs

continuously.

High room temperature. Ensure adequate ventilation.

P1 is shown on the

display.

The upper sensor is disconnect-

ed or short-circuited.

Call for service. The temperature

within the entire cabinet is main-

tained at the higher of the two

setpoints until the fault has been

corrected.

P2 is shown on the

display.

The lower sensor is disconnected

or short-circuited.

Call for service. The temperature

within the entire cabinet is main-

tained at the higher of the two

setpoints until the fault has been

corrected.

20

UK

N

Warranty, spare parts and service

Warranty disclaimer

Faults and damage caused directly or

indirectly by incorrect operation, misuse,

insufficient maintenance, incorrect building,

installation or mains connection. Fire, ac-

cident, lightening, voltage variation or other

electrical interference, including defective

fuses or faults in mains installations.

Spare parts

When ordering spare parts, please state the

type, serial and product numbers of your

appliance. This information is given on the

rating plate. The rating plate contains various

technical information, including type and

serial numbers.

Repairs performed by others than approved

service centres and any other faults and

damage that the manufacturer can sub-

stantiate are caused by reasons other than

manufacturing or material faults are not

covered by the warranty.

Please note that changes to the construc- tion

of the appliance or changes to the component

equipment of the appliance will

invalidate warranty and product liability, and

the appliance cannot be used lawfully. The

approval stated on rating plate will also be

invalidated.

Transport damage discovered by the buyer is

primarily a matter to be settled between the

buyer and the distributor, i.e. the dis- tributor

must ensure that such complaints are

resolved to the buyer’s satisfaction.

Before calling for technical assistance, please

check whether you are able to rectify the fault

yourself. If your request for assist- ance is

unwarranted, e.g. if the appliance has failed as

a result of a blown fuse or incorrect operation,

you will be charged the costs incurred by your

call for technical assistance.

Product numbers

La pagina sta caricando ...

LA SOMMELIERE VIP265V Instructions For Use Manual

Questo manuale è adatto anche per

LA SOMMELIERE VIP265V Instructions For Use Manual

in altre lingue

Documenti correlati

Altri documenti