JVC GR-AXM20U Manuale utente

GR-AXM30

GR-AXM20

COMPACT VHS CAMCORDER

INSTRUCTIONS

LYT0002-0M8B

Compact VHS



PAL

GETTING STARTED

6

RECORDING

14

Basic Recording ...................... 14

Basic Features ........................ 18

Advanced Features .................. 20

Programme AE With Special

Effects .................................. 20

Exposure Control .................... 21

Focusing ................................ 22

Fader ..................................... 24

Wide ..................................... 24

Instant Titles........................... 25

Character Generator ............... 25

Date/Time Character Insert ..... 26

Manual White Balance

Adjustment ........................... 27

Using Menu For Detailed

Adjustment ........................... 28

Self-Timer .............................. 30

Animation .............................. 31

Time Lapse ............................. 31

PLAYBACK

32

Basic Playback ....................... 32

Features............................... 33

Basic Connections .................... 34

Using The Cassette Adapter ........ 35

EDITING

36

Tape Dubbing ......................... 36

Random Assemble Editing [R.A.Edit] ...

37

USING REMOTE CONTROL

UNIT (GR-AXM30 only)

40

Insert Editing ......................... 42

Audio Dubbing.............................

43

USER MAINTENANCE

44

TROUBLESHOOTING

45

INDEX

47

LCD monitor/viewfinder ............ 47

Controls ............................... 48

Connectors ............................ 48

Indicators ............................. 48

Other Parts ........................... 48

Terms .................................. 50

CAUTIONS

51

SPECIFICATIONS

54

CONTENTS

2 EN

Dear Customer,

Thank you for purchasing the JVC Compact VHS

camcorder. Before use, please read the safety

information and precautions contained in the

following pages to ensure safe use of your new

camcorder.

SAFETY

PRECAUTIONS

Using This Instruction Manual

•All major sections and subsections are listed in the

Table Of Contents (Z cover page).

•Notes appear after most subsections. Be sure to

read these as well.

•Basic and advanced features/operation are

separated for easier reference.

It is recommended that you . . .

..... refer to the Index (

Z pgs. 47 – 50) and

familiarize yourself with button locations, etc.

before use.

..... read thoroughly the Safety Precautions that

follow and cautions (Z pgs. 51 – 53). They

contain extremely important information

regarding the safe use of your new camcorder.

IMPORTANT

Connection to the mains supply in the United

Kingdom.

DO NOT cut off the mains plug from this equipment.

If the plug fitted is not suitable for the power points in

your home or the cable is too short to reach a power

point, then obtain an appropriate safety approved

extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical

approved type, as originally fitted, and to replace the

fuse cover.

If nonetheless the mains plug is cut off ensure to

remove the fuse and dispose of the plug immediately,

to avoid a possible shock hazard by inadvertent

connection to the mains supply.

If this product is not supplied fitted with a mains plug

then follow the instructions given below:

DO NOT make any connection to the Larger Terminal

coded E or Green.

The wires in the mains lead are coloured in accord-

ance with the following code:

Blue to N (Neutral) or Black

Brown to L (Live) or Red

If these colours do not correspond with the terminal

identifications of your plug, connect as follows:

Blue wire to terminal coded N (Neutral) or coloured

black.

Brown wire to terminal coded L (Live) or coloured Red.

If in doubt — consult a competent electrician.

Warning on lithium battery

The battery used in this device may present a

fire or chemical burn hazard if mistreated. Do

not recharge, disassemble, heat above 100°C or

incinerate.

Replace the battery with Panasonic (Matsushita

Electric), Sanyo or Maxell CR2025; use of

another battery may present a risk of fire or

explosion.

n Dispose of used battery promptly.

n Keep away from children.

n Do not disassemble and do not dispose of in

fire.

CAUTIONS:

n To prevent shock, do not open the cabinet.

No user serviceable parts inside. Refer

servicing to qualified personnel.

n When you are not using the AC Power

Adapter/Battery charger for a long period of

time, it is recommended that you disconnect

the power cord from AC outlet.

NOTES:

●

The rating plate (serial number plate) and

safety caution are on the bottom and/or the

back of the main unit.

●

The rating plate (serial number plate) of the

AC Power Adapter/Charger is on its bottom.

WARNING:

TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE

THIS UNIT TO RAIN OR

MOISTURE.

Crossed Out Dust Bin Mark

n The Crossed Out Dust Bin

Mark on the battery pack

indicates that the product

complies with Directives

91/157/EEC and 93/86/EEC.

n Nickel-Cadmium (Ni-Cd)

battery pack must be recycled

or disposed of properly.

WARNING: AC Power Adaptor/Charger is NOT

FOR USE WITH TOYS.

EN 3

This camcorder is designed to be used with

PAL-type colour television signals. It cannot be

used for playback with a television of a different

standard. However, live recording and

viewfinder playback are possible anywhere.

Use the BN-V12U/BN-V22U/BN-V25U battery

packs and, to recharge them, the provided

multi-voltage AC Power Adapter/Charger. (An

appropriate conversion adapter may be

necessary to accommodate different designs of

AC outlets in different countries.)

n This camcorder is designed exclusively for the

VHS-C video cassette. Only cassettes marked

VHS-C can be used with this unit.

n HQ VHS is compatible with existing VHS

equipment.

PAL

SOME DO’S AND DON’TS ON THE SAFE USE

OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards

but, like any electrical equipment, care must be taken if you are to obtain the best results and

safety is to be assured.

DO

read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and interconnections

between pieces of equipment) are properly made and in accordance with the manufacturer’s instruc-

tions. Switch off and withdraw the mains plug when making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equip-

ment.

DO be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is

damanged in any way — switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed

for unattended operation or has a standby mode. Switch off using the switch on the equipment and

make sure that your family knows how to do this. Special arrangements may need to be made for

infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements

of road safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating

will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit

the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

— NEVER let anyone especially children push anything into holes, slots or any other opening in the case

— this could result in a fatal electrical shock;

— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

This unit is produced to comply with Standard

IEC Publ. 65.

4 EN

REMEMBER

Programme AE with Special

Effects (

Z pg. 20, 21)

n Auto Mode Lock

n Auto Mode Release

n Electronic Fog Filter n ND Effect

n Sepia n Twilight n Sports

n 1/1000 sec. High Speed Shutter

n 1/2000 sec. High Speed Shutter

Random Assemble Editing

(

Z pg. 37 – 39)

Variable-Speed Hyper Zoom

(

Z pg. 18)

Zoom-in

Zoom-out

LCD Colour Monitor

(

Z pg. 16)

The Logical Choice

The only compact video

cassettes that can be

used with your VHS VCR*

PAL

8

2

5

4

1

6

3

7

Integrated Auto Light

(GR-AXM30 only) (

Z pg. 19)

PROVIDED ACCESSORIES

•AC Power Adapter/

Charger AA-V11EK

•Cassette Adapter C-P7U •Remote Control

Unit RM-V704U

or RM-V700U

(GR-AXM30 only)

•Battery Pack

BN-V12U

•Editing Cable

(GR-AXM30 only)

180°

90°

•Lithium Battery CR2025

• x2 for GR-AXM30

(clock operation and remote control unit)

• x1 for GR-AXM20 (clock operation)

•Shoulder Strap

•Cable Adapter

•DC Cord

EN 5

3

4

2

1

3

2

Using the battery pack

1

Hook-on the battery pack's top end to the

camcorder. (Charging procedure, Z pg. 6)

2 Push in the battery pack until it locks into

place.

To remove the battery pack

Slide BATT. RELEASE and pull out the battery

pack.

QUICK OPERATION GUIDE

1 Slide the LENS COVER open/close knob to

open the lens cover.

2 Set the power switch to “CAMERA”.

— The power indicator will light and an

image will appear in the LCD monitor or

the viewfinder.

3 Press the Recording Start/Stop button.

— Recording starts.

•To stop recording temporarily, momentarily

press the Recording Start/Stop button once

again.

(For more details, Z pg. 14, 15)

•The viewfinder switches off automatically to

save power when the LCD monitor is

opened at an angle of over 45 degrees.

•The LCD monitor turns on/off when it is

opened/closed at approx. 45 degrees.

SUPPLY POWER

INSERTING A VIDEO

CASSETTE

PLAYBACK

SHOOTING

1 Slide MONITOR OPEN to open the LCD

monitor.

•Open to an angle of over 45 degrees.

2 Press EJECT to open the cassette holder.

3 Insert a video cassette.

4 Press PUSH to close the cassette holder.

(For more details, Z pg. 11)

3

2

1

PLAY/PAUSE

STOP

REW

2

1

Hook on.

Push in.

BATT. RELEASE

Set to “PLAY”

LENS COVER

open/close knob

Recording Start/Stop button

Set to “CAMERA”

MONITOR OPEN

EJECT

PUSH

1 Set the power switch to “PLAY”.

2 Press REW.

— The tape will automatically stop at the

beginning of the tape.

3 Press PLAY/PAUSE.

— Playback starts and the playback picture

appears in the viewfinder or the LCD

monitor.

•To stop playback, press STOP.

(For more details, Z pg. 32.)

•The viewfinder switches off automatically to

save power when the LCD monitor is

opened at an angle of over 45 degrees.

•The LCD monitor turns on/off when it is

opened/closed at approx. 45 degrees.

Or simply play back the tape on a VHS

VCR using the Cassette Adapter. Z pg. 35

6 EN

GETTING STARTED

Power

This camcorder’s 3-way power supply system lets you

choose the most appropriate source of power.

NOTES:

●

No function is available without power supply.

●

Use only specified power supply.

●

Do not use provided power supply units with other

equipment.

CHARGING THE BATTERY PACK

SUPPLY POWER

1

Connect the charger’s AC power cord to a wall

outlet. The power indicator lights.

ATTACH BATTERY PACK

2

Align the marks and slide the battery pack in the

direction of the arrow until it locks in place.

The CHG. indicator lights.

DETACH BATTERY PACK

3

When charging is completed, the END indicator

lights. Slide the battery pack opposite the direction of

the arrow.

Approximate recording time (unit: min.)

USING THE BATTERY PACK

ATTACH BATTERY PACK

1

Hook its top end to the camcorder and push the

battery pack in until it locks in place.

DETACH BATTERY PACK

2

Slide BATT. RELEASE and pull out the battery pack.

BATT. PACK CHARGE DISCHARGE

BN-V12U approx. 1 hr. 10 min. approx.

3 hrs. 30 min.

BN-V22U approx. 2 hrs. 10 min. approx. 7 hrs.

BN-V25U approx. 2 hrs. 40 min. approx. 10 hrs.

BATT. LCD monitor on/ LCD monitor off/

PACK Viewfinder off Viewfinder on

GR-AXM30 GR-AXM20 GR-AXM30 GR-AXM20

BN-V12U 50 (35) 50 55 (35) 55

BN-V22U 110 (75) 110 120 (80) 120

BN-V25U 150 (100) 150 160 (105) 160

REFRESH indicatorREFRESH switch

To AC outlet

POWER

indicator

END

indicator

( ): when the light is on (GR-AXM30 only).

CHG. (charge) indicator

Marks

**REFRESH

The AC power adapter features a REFRESH

function that allows you to fully discharge

the battery pack before recharging.

Perform the REFRESH function after no

less than 5 chargings.

To discharge the battery . . .

..... attach the battery pack to the adapter

as shown in the above illustration.

Then push REFRESH. The REFRESH

indicator lights when discharging

starts, and goes out when discharging

is complete.

ATTENTION:

Before detaching the power source,

make sure that the camcorder’s power

is turned off. Failure to do so can result

in a camcorder malfunction.

1

2

BATT. RELEASE

Hook on.

Push in.

EN 7

NOTES:

●

The recording time per charge is affected by such factors as the time spent in Record/Standby mode and

the frequency of zooming. It is safer to have spare battery packs.

●

Charging times noted on page 6 are for fully discharged battery pack, and discharging times are for fully

charged battery pack.

●

Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

●

Remember to set the charge marker after charging a battery pack or after detaching a discharged one from

your camcorder.

●

Perform the REFRESH function after no less than 5 chargings.

●

High temperatures can damage the battery pack, so use only where good ventilation is available. Don’t

allow it to discharge in container, such as a bag.

●

If you stop recharging or discharging part way through, make sure to remove the battery pack before

unplugging the adapter’s AC cord.

●

Remove the battery pack from the adapter immediately after discharging.

●

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●

Make sure you unplug the DC cord before charging or discharging the battery pack.

●

A blinking CHG. indicator means that the battery pack has become hot. Wait until it cools down to continue.

●

The CHG. indicator may not light properly with a brand new battery pack, or with one that’s been stored

for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG.

indicator should light during recharging. If not, contact your nearest JVC dealer.

USING A CAR BATTERY

Use the optional Car Battery Charger/Adapter

(connect as shown in the above illustration).

NOTES:

●

When using the car battery, leave the engine idling.

●

The optional Car Battery Charger (BH-V3E) can

also be used to charge the battery pack.

●

When using the optional Car Battery Charger,

refer to the respective instruction booklet.

USING AC POWER

Use the AC Power Adapter (connect as shown in

the above illustration).

NOTES:

●

The supplied AC Power Adapter/Charger features

automatic voltage selection in the AC range from

110 V to 240 V.

●

When using the provided DC cord, make sure

you connect the end of the cable with the core

filter to the camcorder. The core filter improves

performance of equipment.

To DC in jack

DC OUT

terminal

To AC outlet

**CHARGE MARKER

A charge marker is provided on the battery pack to

help you remember whether it has been charged or

not. Two colours are provided (red and black)—you

choose which one means charged and which

means discharged.

Charge marker

AC Power

Adapter/Charger AA-V11EK

Core Filter

DC cord

Car Battery Charger/Adapter

BH-V3E (optional)

To car's cigarette

lighter socket

8 EN

GETTING STARTED

(cont.)

Clock (Lithium) Battery Insertion/Removal

This battery is necessary for clock operation and to

perform date/time settings.

SWITCH OFF POWER

1

Switch off the unit’s power and remove the power

supply unit.

OPEN COVER

2

Open the clock battery compartment cover while

pressing the release tab.

REMOVE BATTERY (when replacing)

3

Insert a pointed, non-metallic object between the

battery and the compartment (

A

) and pull the

battery out.

INSERT BATTERY

4

Ensure that the plus (+) side is up and insert a

CR2025 lithium battery and push it in.

CLOSE COVER

5

Close the compartment cover until it clicks in place.

NOTE:

See “SAFETY PRECAUTIONS” (

Z

pg. 2) for information

on safe handling of lithium batteries.

A

EN 9

SET

CANCEL

1.1.00 12:00

GAIN UP S.LX

TELE MACRO OFF

INTERVAL TIMER OFF

REC TIME OFF

JLIP ID NO. 07

SET CHARACTER 

DATE/TIME 

END :MENU KEY

Date/Time Setting

SELECT MODE

1

First set the power switch to “CAMERA”. Turn the

PROGRAM AE select dial to any position except

AUTO LOCK.

ACCESS MENU SCREEN

2

Press MENU.

SELECT FUNCTION

3

Press – to move the highlight bar down to “DATE/

TIME”, then press NEAR. The Set Date And Time

screen appears.

SET DATE/TIME

4

Press FAR or NEAR until the item you want to set

begins blinking, then press + or – until the correct

setting appears.

•If you decide you want to return the date and time

to the previous settings, press FAR or NEAR to

move the highlight bar to “CANCEL”, then press

MENU.

•If you’re satisfied with the settings, go on to step 5.

START CLOCK OPERATION

5

Once you’ve set the date and time, press FAR or

NEAR until “SET” begins to blink, then press MENU.

The Menu screen reappears.

CLOSE MENU

6

Press MENU.

NOTES:

●

To display the date and time in the LCD monitor or the

viewfinder and on a connected TV, see “Date/Time

Insert” (

Z

pg. 26).

●

If, in step 4, you input an invalid date (30. 2., 31. 6.,

etc.) and perform step 5, “INPUT ERROR” appears

blinking at the bottom of the screen. Press +, –, FAR or

NEAR to input the correct number.

NEAR

MENU FAR

PROGRAM AE select dial

Menu Screen

Set Time and

Date Screen

Date

Day/Month/Year

Time

24-hour indication

LCD monitor or viewfinder

10 EN

SP

LP

SP

T30

T45 T60

GETTING STARTED

(cont.)

Tape Length Setting

Set the tape length according to the length of the tape

used.

SET TAPE LENGTH

1

Press T30•45•60 until the required indication

appears in the LCD monitor or the veiwfinder. T30 =

30 minutes of recording time, T45 = 45 minutes,

and T60 = 60 minutes (in SP).

NOTE:

The tape remaining time (

Z

pg. 15) displayed in the

LCD monitor or the viewfinder is correct only if the

correct tape length has been selected.

Recording Mode Setting

Set depending on your preference.

SET RECORDING MODE

1

Press SP•LP button. “SP” (Standard Play) provides

higher picture and sound quality and is better for

dubbing, while “LP” (Long Play) is more economi-

cal, providing twice the recording time.

NOTE:

If the recording mode is switched during recording, the

playback picture will be blurred at the switching point.

T30•45•60 tape length select button

Tape length indicator

Recording mode indicator

Set POWER to “CAMERA”.

SP-LP recording

mode button

LCD monitor or

viewfinder

EN 11

1

2

3

4

5

Loading/Unloading A Cassette

OPEN LCD MONITOR

1

Slide MONITOR OPEN and open the LCD monitor

to an angle of over 45 degrees.

OPEN CASSETTE HOLDER

2

Press EJECT until the holder opens. Do not use force

to open.

INSERT/REMOVE CASSETTE

3

Make sure the label is facing outward.

CLOSE CASSETTE HOLDER

4

Press PUSH and make sure the holder is closed and

locked.

CLOSE LCD MONITOR

5

First make sure the holder is closed. Then close the

LCD monitor.

NOTES:

●

Closing the LCD monitor while the cassette holder is

still open may cause damage to the LCD monitor.

●

A cassette holder can’t be opened unless a power

supply is attached.

●

Make sure that the tape is not slack when loading the

cassette. If there is any slack, turn the gear on the

cassette in the direction of the arrow to take up the

slack.

●

Make sure the Erase Protection tab is in the position

that allows recording. If not, slide the tab. Some

cassettes have removable tabs. If the tab has been

removed, cover the hole with adhesive tape.

●

The cassette holder can’t be opened while the

camcorder is in the record mode.

GearErase Protection

Turn to take

up slack.

12 EN

GETTING STARTED

(cont.)

Grip Adjustment

EXPAND LOOP

1

Separate the Velcro strip.

INSERT HAND

2

Pass your right hand through the loop and grasp the

grip.

ADJUST STRAP LENGTH

3

Adjust so your thumb and fingers can easily operate

the Recording Start/Stop button and Power Zoom

lever. Refasten the Velcro strip.

Recording Start/Stop button

1

2

3

Set POWER to “CAMERA”.

Viewfinder Adjustment

POSITION VIEWFINDER

1

Adjust the viewfinder manually for best viewability

(see illustration at left).

SELECT MODE

2

Set the power switch to CAMERA.

ADJUST DIOPTRE

3

Turn the dioptre adjustment control until the

indications in the viewfinder are clearly focused.

Power zoom lever

EN 13

Shoulder Strap Attachment

ATTACH STRAP

1

Following the illustration at left, thread the strap

through the top of the eyelet 1, then fold it back

and thread it through the keeper 2, and then

through the buckle 3. Repeat the procedure to

attach the other end of the strap to the other eyelet,

making sure the strap isn’t twisted.

ADJUST LENGTH

2

Adjust as shown in the illustration at left 1, then

slide both keepers snug against the eyelets to

prevent slipping 2.

Tripod Mounting

ALIGN AND TIGHTEN

1

Align the screw and camera direction stud on the

tripod with the camera’s mounting socket and stud

hole. Then tighten the screw.

2

3

2

1

CAUTION:

When using a tripod, be sure to open and extend

its legs fully to stabilize the camcorder. To

prevent damage to the unit caused by falling

over, do not use a small-sized tripod.

14 EN

RECORDING

Basic Recording

NOTE:

You should already have performed the procedures listed

below. If not, do so before continuing.

●

Power (

Z

pg. 6)

●

Tape Length Setting (

Z

pg. 10)

●

Recording Mode Setting (

Z

pg. 10)

●

Grip Adjustment (

Z

pg. 12)

LOAD A CASSETTE

1

First slide MONITOR OPEN and open the LCD

monitor to an angle of over 45 degrees.

Press EJECT to open the cassette holder, then insert

the cassette with the label facing out. Press PUSH to

ensure the holder is closed and locked.

Shooting while watching the viewfinder

ENTER RECORD–STANDBY MODE

2

Make sure the LCD monitor is closed and locked.

Slide the LENS COVER open/close switch to open

the lens cover, then set the power switch to

CAMERA.

•The power indicator lights and the camcorder

enters the Record–Standby mode.

•The scene you’re aimed at appears on the

viewfinder screen, with the word “PAUSE”

superimposed upon it.

START SHOOTING

3

Press the Recording Start/Stop button.

•The tally lamp lights while recording is in progress,

and “

REC

” appears in the viewfinder.

LENS COVER Switch

Power indicator

POWER

Start/Stop

button

Tally lamp

EN 15

STOP RECORDING

4

Press the Recording Start/Stop button again to stop

recording.

•The camcorder re-enters the Record-Standby

mode.

NOTES:

●

When the power switch is set to CAMERA and the LCD

monitor is opened at an angle of 45 degrees or more, the

LCD monitor switches on and the viewfinder switches

off automatically to save power.

●

A cassette holder can’t be opened unless a power supply

is attached.

●

There may be a delay after you press EJECT until the

holder opens. Do not use force.

●

The tape’s remaining time is displayed in the LCD

monitor or the viewfinder as shown.

●

The indicated remaining time is approximate.

●

The time required to calculate the remaining tape

length, and the accuracy of the calculation, may vary

according to the type of tape used.

●

The tape remaining time indicator is correct only if the

correct tape length has been selected (

Z

pg. 10).

●

“TAPE END” appears when the tape reaches its end,

and the power goes off automatically if left in this

condition for 5 minutes. “TAPE END” also appears

when a cassette whose tape is already at its end is

loaded.

●

While shooting, pressing DISPLAY lets you remove

some indications from the screen (

Z

pg. 47).

●

If the Record–Standby mode continues for 5 minutes

without performing Zoom or any other operations, the

camcorder’s power shuts off automatically. Set the

Power switch to “POWER OFF”, and then back to

“CAMERA” to turn the camcorder on again.

●

If the Recording Start/Stop button is pressed after the

Record-Standby mode has continued for over 5

minutes, recording may not start immediately.

●

If you’re recording on a cassette from the middle, use

the RETAKE function (

Z

pg. 18) to find the end of the

last recording so you don’t erase any of it.

●

The LENS COVER warning blinks for about 10 seconds

when the camcorder is turned on when the cover is

closed.

●

While shooting, sound is not heard from the speaker.

25MIN

120MIN

119MIN

3MIN

2MIN (Blinking)

1MIN (Blinking)

0MIN (Blinking)

*-

-

-MIN

(Now calculating)

Tape remaining time indicator

Start/Stop button

DISPLAY button

Tally lamp

16 EN

RECORDING

Basic Recording (cont.)

Shooting while watching the LCD monitor

Before the following steps, perform step 1 (Z pg. 14).

ENTER RECORD–STANDBY MODE

2

Make sure the LCD monitor is fully open. Slide the

LENS COVER open/close switch to open the lens

cover, then set the power switch to CAMERA.

•The power indicator lights and the camcorder

enters the Record–Standby mode.

•The scene you’re aimed at appears in the LCD

monitor, with the word “PAUSE” superimposed

upon it.

START SHOOTING

3

Tilt the LCD monitor upward/downward for best

viewability (Z pg. 17) and press the Recording

Start/Stop button.

•The tally lamp lights while recording is in progress,

and “

REC

” appears in the LCD monitor.

STOP RECORDING

4

Press the Recording Start/Stop button again to stop

recording.

•The camcorder re-enters the Record-Standby

mode.

NOTES:

●

When you use the LCD monitor outdoors in direct

sunlight, the LCD monitor may be difficult to see. If this

happens, we recommend that you use the viewfinder

(

Z

pg. 14).

●

For other notes, refer to pg. 15.

25MIN

120MIN

119MIN

3MIN

2MIN (Blinking)

1MIN (Blinking)

0MIN (Blinking)

*-

-

-MIN

(Now calculating)

LENS COVER

Switch

POWER

Start/Stop

Power indicator

Tape remaining time indicator

MONITOR

OPEN

Tally lamp

EN 17

Journalistic shooting

In some situations different angles of shooting may be

required for more dramatic results.

OPEN LCD MONITOR

1

Make sure the LCD monitor is fully open.

TILT LCD MONITOR

2

Tilt the LCD monitor in the most convenient

direction.

•The LCD monitor can rotate almost full circle

(270°: 90° downward, 180° upward).

Brightness control

You can adjust the brightness of the LCD monitor by

turning the BRIGHT dial.

ADJUST BRIGHTNESS

1

If you want to brighten the image...

Turn the dial towards “+”.

If you want to darken the image...

Turn the dial towards “–”.

Self-recording

You can shoot yourself while viewing your own image in

the LCD monitor.

TILT LCD MONITOR UPWARD

1

Open the LCD monitor and tilt it upward to 180

degrees so that it faces forward.

START RECORDING

2

Point the lens toward yourself and start recording.

•During self-recording, the monitor image and

indications do not appear inverted as they would

when viewing a mirror.

BRIGHT dial

18 EN

RECORDING

Basic Features

FEATURE: Zooming

PURPOSE: Varies the focal length of the lens

and produces the zoom in/out effect.

OPERATION:

Zoom In

1) Push the power zoom lever down

towards “T”.

Zoom Out

1) Push the lever up towards “W”.

NOTES: ●

The further the power zoom lever

is pushed, the faster the zoom

speed becomes.

●

Focusing may become unstable

during zooming. In this case, set

the zoom while in Record–

Standby, set manual focus or Focus

Lock (

Z

pgs. 22, 23), then zoom

in or out in Record mode.

FEATURE: Quick Review

PURPOSE: To check the end of the last record-

ing.

OPERATION: 1) Press “

” and release quickly

during the Record–Standby mode.

•Tape is rewound for about 2

seconds and played back

automatically, then pauses in

Record–Standby mode for the

next shot.

NOTE:

Distortion may occur at start of

playback. This is normal.

FEATURE: Retake

PURPOSE: To re-record certain segments.

OPERATION: 1) Make sure the camcorder is in the

Record–Standby mode.

2) Press either RETAKE button to

reach the start point for new

recording.

Pressing “F” fast-forwards the tape

and pressing “R” reverses it.

3) Press Recording Start/Stop to start

recording.

NOTE:

Noise may appear during Retake.

This is normal.

Zoom-out

Zoom-in

RETAKE (R/F)

Power zoom lever

Zoom indicator

EN 19

Video Light (GR-AXM30 only)

When natural lighting is too dim, you can brighten the

scene by using the built-in video light.

SET VIDEO LIGHT

1

Set the LIGHT OFF/AUTO/ON as required.

ON : Always keeps the light on as long as the

camcorder is turned on.

AUTO : Automatically turns on the light when the

camcorder senses insufficient lighting on

the subject.

OFF : Turns off the light.

•The video light can only be used with the

camcorder’s power on.

•It is recommended to set the white balance

(Z pg. 27) to indoor mode ( ) when you use the

video light.

•When not using the video light, turn it off to save

battery power.

NOTES:

●

Even if the battery indicator ( ) does not blink in the

LCD monitor or the viewfinder, if the battery pack’s

charge is low, the camcorder may turn off automati-

cally when you turn on the video light, or when you

start recording with the video light turned on.

●

When the LIGHT OFF /AUTO/ON switch is set to

“AUTO”:

•

Depending on the lighting conditions, the video light

may keep turning on and off. In this case, manually

switch the light on or off using the LIGHT OFF/

AUTO/ON switch.

•

While the Sports or High-Speed Shutter mode

(

Z

pg. 21) is engaged, the light is likely to stay on.

•

While the Twilight mode (

Z

pg. 21) is engaged, the

light will not activate.

DANGER

•The video light can become extremely hot. Do not

touch it either while in operation or soon after

turning it off, otherwise serious injury may result.

•Do not place the camcorder into the carrying case

immediately after using the video light, since it

remains extremely hot for some time.

•When operating, keep a distance of about 30 cm.

between the video light and people or objects.

•Do not use near flammable or explosive materials.

•It is recommended that you consult your nearest

JVC dealer for replacing the video light.

LIGHT OFF/AUTO/ON

20 EN

Dial LCD monitor/

Mode

symbol Viewfinder indication

Electronic Fog Filter

Makes the picture look misty white, as when an

external fog filter is attached to the lens. Softens the

image and gives it a “fancy“ look.

ND Effect

A black mist darkens the picture, as when an ND

filter is used. Helps to counter the effects of glare on

the subject.

RECORDING

Advanced Features

Dial LCD monitor/

Mode

symbol Viewfinder indication

Auto Mode Lock

Locks the camcorder in Full Auto mode, preventing

incorrect operation due to accidental button

pressing during shooting.

•In this mode the following controls are disabled;

FADE, WIDE, TITLE, DISPLAY, M.W.B (Manual

White Balance), Manual Focus, Focus Lock,

Exposure Control and MENU

Auto Mode Release

Re-enables the controls that were disabled by Auto

Mode Lock.

Auto Mode Lock

LOCK

AUTO LOCK

Auto Mode 

Release

RELEASE

AUTO RELEASE

Electronic Fog Filter

FG:FOGFG

ND EffectND:ND EFFECTND

Programme AE With Special Effects

All you have to do to access any of the variety of

shooting effects is to turn the PROGRAM AE select dial.

SELECT MODE

1

Turn the PROGRAM AE select dial until the symbol

of the function you want is aligned with the mark.

•The selected mode’s name and its indication are

displayed in the LCD monitor or the viewfinder for

approx. 1 second. Then the name disappears, and

only the indication remains. The mode is acti-

vated.

•When Auto Mode Lock or Auto Mode Release

mode is selected, only the mode’s name is

displayed. Then the name disappears and the

mode is activated.

NOTES:

●

Only one effect can be engaged at a time.

●

The screen becomes slightly reddish when the fader

(

Z

pg. 24) is used in the Sepia mode.

●

The screen becomes slightly dark in the High Speed

Shutter mode. Use in well-lit situations.

●

In the High Speed Shutter or Sports modes, picture

colour may be adversely affected if subject is lit by

alternating discharge-type light sources such as

flourescent or mercury-vapour lights.

1

/

1

0

1

/

2

0

F

G

N

D

A

U

T

O

M

O

D

E

L

O

C

K

R

E

L

E

A

S

E

SEPIA

1 second later, the mode is activated.

After 1 sec.

LCD monitor or

viewfinder

Mark

PROGRAM AE

select dial

La pagina si sta caricando...

JVC GR-AXM20U Manuale utente

JVC GR-AXM20U Manuale utente

in altre lingue

Documenti correlati

Altri documenti