Pioneer VSX -832 av Manuale utente

VSX-832

AV RECEIVER

Instruction Manual

Mode d’emploi

Manual de

instrucciones

Manuale di istruzioni

Bedienungsanleitung

Gebruikershandleiding

Grundläggande

bruksanvisning

I

t

D

e

N

l

S

v

En

Fr

Es

2

Before Start

Table of Contents

Before Start ............................................................2

What's in the box .....................................................3

Part Names ............................................................4

Part Names .............................................................4

Install ......................................................................8

Installation procedure ..............................................8

Step1: Speaker Layout ............................................9

Step2: Connect the Speakers ...............................14

Step3: Connect the TV & AV Components ............15

Initial Setup ..........................................................20

Initial Setup with Auto Start-up Wizard ..................20

Playback ..............................................................22

AV Component Playback ......................................22

BLUETOOTH

®

Playback ......................................23

Internet Radio .......................................................24

Spotify ...................................................................26

AirPlay

®

.................................................................27

USB Storage Device .............................................28

Listening To the AM/FM Radio ..............................29

Music Server .........................................................32

Supplementary information for player functions ....34

Listening Mode ......................................................35

Advanced Setup ..................................................44

System Setup ........................................................44

MCACC .................................................................55

Network/Bluetooth .................................................58

AV Adjust ..............................................................61

Web Setup ............................................................63

Firmware Update ..................................................64

Supplementary Information ...............................67

Supplementary Information ...................................67

Others ..................................................................68

Troubleshooting ....................................................68

General Specifications ..........................................73

Reference Information ..........................................75

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

3

En

What's in the box

1. Main unit (1)

2. Remote controller (RC-957R) (1), batteries (AAA/R03)

(2)

3. Speaker setup microphone (1)

0 Used during Initial Setup.

4. Indoor FM antenna (1)

5. AM loop antenna (1)

0 Quick Start Guide (1)

* This document is an online instruction manual. It is not

included as an accessory.

0 Connect speakers with 4 ≠ to 16 ≠ impedance.

0 The power cord must be connected only after all other

cable connections are completed.

0 We will not accept responsibility for damage arising from

the connection of equipment manufactured by other

companies.

0 Functionality may be introduced by firmware updates

and service providers may cease services, meaning that

some network services and content may become

unavailable in the future. Furthermore, available services

may vary depending on your area of residence.

0 Details on the firmware update will be posted on our

website and through other means at a later date.

0 Specifications and appearance are subject to change

without prior notice.

0 We plan to provide support for the Dolby Atmos audio

format through firmware updates for this product. Refer

to our website for more information.

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

1

32

54

4

Part Names

Front Panel

1. INPUT SELECTOR dial: Switches the input to be played.

2. MCACC indicator: This lights when you have enabled the speaker calibration made with

MCACC (P20).

3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the

display off.

4. DIMMER button: You can switch the display off or adjust the brightness of the display in

three steps.

5. TUNING MODE button: Switches tuning to an AM/FM station between automatic tuning

and manual tuning (P29).

6. +FAVORITE button: Used to register AM/FM radio stations (P30).

7. HOME MENU button: Displays the Home screen (P44, 55, 58).

8. Display (P5)

9. Cursors ( /  /  / ), ENTER button: Select the item with the cursors and press

ENTER to confirm. Use them to tune to stations when using TUNER (P29).

10.

NETWORK indicator: Lights when "NET" input is selected and the unit is connected to

the network. If the unit is in standby mode, this lights when functions such as HDMI CEC

and network standby are enabled.

11.

WIRELESS indicator: Lights when the unit is connected to the wireless network and when

connected to a BLUETOOTH wireless technology enabled device.

12.

Remote control sensor: Receives signals from the remote controller.

0 The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on

the perpendicular axis and 30° to either side.

13.

RETURN button: Returns the display to the previous state during setting.

14.

MASTER VOLUME

15.

Í STANDBY/ON button

16.

PHONES jack: Connect stereo headphones with a standard plug (Ø1/4z/6.3 mm

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others





    

   



5

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

En

diameter).

17.

MCACC SETUP MIC jack: Connect the supplied

speaker setup microphone.

18.

Listening mode buttons: Press "AUTO/DIRECT",

"SURROUND" or "STEREO" to switch the listening

mode(P35).

19.

SOUND RETRIEVER button: Turn on or off Sound

Retriever which improves the quality of compressed

audio.

20.

PURE DIRECT button: Used to switch to the Pure

Direct mode (P35).

21.

USB jack: A USB storage device is connected so that

music files stored in it can be played. You can also

supply power (5 V/500 mA) to USB devices with a USB

cable.

22.

AUX INPUT jack: Connect a video camera, etc., using

a stereo mini plug cable (Ø1/8z/3.5 mm).

Display

1. This may light when performing operations with the "NET" or "USB"

input selector.

2. Lights in the following conditions.

: When connected via BLUETOOTH

: When connected by Wi-Fi

NET: When "NET" is selected with the input selector and the unit is

connected to the network. It will flash if the connection to the network is

not correct.

USB: When "USB" is selected with the input selector and the unit is

connected by USB and the USB device is selected. Flashes if the USB

is not properly connected.

HDMI: HDMI signals are input and the HDMI input selector is selected.

DIGITAL: Digital signals are input and the digital input selector is

selected.

3. Lights according to the type of input digital audio signals and the

listening mode.

4. Lights in the following conditions.

RDS (European, Australian and Asian models): Receiving RDS

broadcasting.

TUNED: Receiving AM/FM radio.

STEREO: Receiving FM stereo.

SLEEP: Sleep timer has been set (P52).

AUTO STBY: Auto Standby has been set (P52).

5. Lights when headphones are connected.

6. Flashes when muting is on.

7. Displays various information of the input signals.

8. Lights while adjusting the volume.

9. Speaker/Channel display: Displays the output channel that

corresponds to the selected listening mode.





6

Rear Panel

1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio

signals with a digital optical cable or digital coaxial cable.

2. VIDEO IN jacks: Input the video signals of an AV component with an analog video cable.

3. NETWORK jack: Connect to the network with an Ethernet cable.

4. USB jack: A USB storage device is connected so that music files stored in it can be

played. You can also supply power (5 V/500 mA) to USB devices with a USB cable.

5. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH wireless

technology enabled device. Adjust their angles according to the connection status.

6. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a

TV.

7. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an

AV component.

8. Power cord

9. AUDIO IN jacks: Input AV component audio signals with an analog audio cable.

10.

ANTENNA AM LOOP/FM UNBAL 75≠ jacks: Connect the supplied antenna.

11.

SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.

12.

SPEAKERS jacks: Connect speakers with speaker cables. (North American models are

banana plug ready.)

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

180°

90°





 









7

En

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

Remote Controller

1. Í STANDBY/ON button

2. Input selector buttons: Switches the input to be played.

3. 21 buttons: Select the input to be played.

4. (AV ADJUST) button: Settings such as "Tone" and "Level"

can be made quickly during play on the TV screen (P61).

Note that there is no display on the TV screen when the input

selector is "CD", "TV", "AM", or "FM", so follow the display on

the main unit while doing the operations.

5. Cursors, ENTER button: Select the item with the cursors and

press ENTER to confirm. When the folder or file lists are not

shown on one screen on the TV, press / to change the

screen.

6. button: Displays the Home screen (P44, 55, 58).

7. Volume buttons

8. button: Temporarily mutes audio. Press again to cancel

muting.

9. LISTENING MODE buttons: Select listening modes (P35).

10.

Play buttons: Used for play operations when playing Music

Server or USB.

11.

button: Used for repeat or random play operations

when playing Music Server or USB. Each time you press the

button, the mode switches from (1-track repeat), to

(folder repeat), to (random).

CLEAR button: Deletes all characters you have entered

when entering text on the TV screen.

12.

(STATUS) button: Switches the information on the display

and is used to operate RDS (P30).

13.

button: Returns the display to the previous state during

setting.

14.

MODE button: Switches tuning to an AM/FM station between

automatic tuning and manual tuning (P29).

15.

+Fav button: Used to register AM/FM radio stations (P30).

0 MAIN and ZONE buttons are not used.































8

Install

Installation procedure

This unit can be used in a number of ways, depending on

the layout of the speakers you are installing, and the

connections made to external devices. Read the following

to help make the installation process smoother.

Step1: Speaker Layout

Select the speaker layout that suits the types of speakers

you have and the conditions they will be used in from the

choices presented on pages P9 to P12, then install the

speakers by referring to the illustrations and explanations

on the relevant page. Speaker layouts include systems that

use surround speakers and systems that use height

speakers. Also refer to the combinations available in

"Speaker combinations" on P13.

Step2: Connect the Speakers

Refer to P14 to connect the speaker system to this unit.

The connection process will be smoother if you refer to the

illustrations and explanations and prepare the required

cables beforehand.

Step3: Connect the TV & AV Components

Refer to P15 to P19 to connect your external devices such

as your TV, Blu-ray Disc Player, and also supplied

accessories such as the antennas. The connection process

will be smoother if you refer to the illustrations and

explanations, confirm the connection types on the external

devices, and prepare the required cables beforehand.

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

1

2 3

9

En

Step1: Speaker Layout

5.1 Channel System

Front speakers output front stereo sound and the center

speaker outputs sounds emanating from the center of the

screen, such as dialog and vocals. Surround speakers

create the sound field at the rear. The powered subwoofer

reproduces bass sounds and enriches the sound field. The

optimal positioning for front speakers is at ear height, and

for surround speakers it is just above ear height. The center

speaker should be set up at an angle to face the listening

position. Placing the powered subwoofer between the

center speaker and a front speaker gives you a natural

sound even when playing music.

1,2 Front Speakers

3 Center Speaker

4,5 Surround Speakers

6 Powered Subwoofer

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

1

2

¢1: 22e to 30e, ¢2: 120e

10

3.1.2 Channel System-1

(Front High Speakers)

This is a 3.1-channel system consisting of front speakers, a

center speaker, and a powered subwoofer, with the addition

of front high speakers, a type of height speaker. Front high

speakers should be situated at least 3y/0.9 m higher than

the front speakers. They should also be put directly above

the front speakers, angled to face the listening position.

0 We plan to provide support for the Dolby Atmos audio

format through firmware updates for this unit. After this

firmware update, by installing height speakers, you can

select the Dolby Atmos listening mode, which realizes

the most up-to-date 3D sound including overhead

sounds, when the input format is Dolby Atmos. Visit our

website for details about firmware updates.

1,2 Front Speakers

3 Center Speaker

4,5 Front High Speakers

6 Powered Subwoofer

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

1

3´ (0.9 m)

or more

¢1: 22e to 30e

11

En

3.1.2 Channel System-2

(Ceiling Speakers)

This is a 3.1-channel system consisting of front speakers, a

center speaker, and a powered subwoofer, with the addition

of top middle speakers, a type of height speaker. Fit top

middle speakers on the ceiling directly above the listening

position. The distance between each pair should match the

distance between the two front speakers.

0 We plan to provide support for the Dolby Atmos audio

format through firmware updates for this unit. After this

firmware update, by installing height speakers, you can

select the Dolby Atmos listening mode, which realizes

the most up-to-date 3D sound including overhead

sounds, when the input format is Dolby Atmos. Visit our

website for details about firmware updates.

0 Dolby Laboratories recommends placing this type of

height speakers to obtain the best Dolby Atmos effect.

1,2 Front Speakers

3 Center Speaker

4,5 Top Middle Speakers

6 Powered Subwoofer

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

1

¢1: 65e to 100e

12

3.1.2 Channel System-3

(Dolby Enabled Speakers (Dolby Speakers))

This is a 3.1-channel system consisting of front speakers, a

center speaker, and a powered subwoofer, with the addition

of Dolby enabled speakers (front), a type of height speaker.

Dolby enabled speakers are special speakers designed to

face the ceiling so that sound is heard after bouncing off the

ceiling so that sound appears to be coming from overhead.

Place Dolby enabled speakers (front) above the front

speakers.

0 We plan to provide support for the Dolby Atmos audio

format through firmware updates for this unit. After this

firmware update, by installing height speakers, you can

select the Dolby Atmos listening mode, which realizes

the most up-to-date 3D sound including overhead

sounds, when the input format is Dolby Atmos. Visit our

website for details about firmware updates.

1,2 Front Speakers

3 Center Speaker

4,5 Dolby Enabled Speakers (Front)

6 Powered Subwoofer

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

1

¢1: 22e to 30e

13

En

Speaker combinations

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

Speaker Channels FRONT CENTER SURROUND HEIGHT

2.1 ch

3.1 ch

4.1 ch

5.1 ch

2.1.2 ch

3.1.2 ch

14

Step2: Connect the Speakers

Make correct connection between the unit's jacks and

speaker's jacks (+ to + and - to -) for each channel. If

connection is wrong, reverse phase may make bass output

poor.

Connect the speaker cable so the wires do not

protrude from the speaker jacks. If the

exposed wires of the speakers touch the rear

panel or the + and - wires touch each other,

the protection circuit will be activated.

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

a

b

1/2˝

(12 mm)

a Speaker cable, b Subwoofer cable

Setup

0 Settings for the speaker configuration you have

connected need to be made in "1. Full Auto

MCACC" in Initial Setup (P20).

0 If any of the connected speakers have an

impedance of 4 ≠ or more to less than 6 ≠, after

completing Initial Setup, you need to make some

settings in the System Setup menu. Press on

the remote controller, and in the Home menu

displayed set "System Setup" - "Speaker" -

"Configuration" - "Speaker Impedance" to

"4ohms".

15

En

Step3: Connect the TV & AV Components

1. Connect the TV

To ARC TV

For a TV that supports the ARC (Audio Return Channel)

feature (*), use an HDMI cable and connect according to

illustration "a". Choose an HDMI IN jack on the TV that

supports ARC when connecting.

To Non-ARC TV

For a TV that does not support the ARC (Audio Return

Channel) feature (*), connect both the HDMI cable in

illustration "a" and the digital optical cable in "b".

0 Connection with a digital optical cable is not necessary if

you will watch TV through a device such as a cable set-

top box (that is, not use a tuner built into the TV) that you

have connected to the input jack on this unit.

(*) ARC feature: This feature transfers TV audio signals via

HDMI cable so that you can play the audio from the TV

through this unit. Connection to an ARC compatible TV is

complete with one HDMI cable. Refer to the instruction

manual for your TV to see if it supports ARC.

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

TV

a

b

a HDMI cable, b Digital optical cable

Setup

0 Settings are required to use the ARC function.

For "4. Audio Return Channel" (P21) in Initial

Setup, select "Yes".

0 Refer to the instruction manual for the TV for TV

connections and instructions regarding settings

for CEC features and audio output.

16

2. Connect the HDMI AV Component

This is an example of connection with an AV component

that has an HDMI jack. With connection to an AV

component that conforms with the CEC (Consumer

Electronics Control) standard, you can use features such as

the HDMI CEC feature (*) that links with the input selector,

and the HDMI Standby Through feature which allows you to

play video and audio from AV components on the TV even

when this unit is in standby mode.

0 To play 4K or 1080p video, use the high speed HDMI

cable.

(*) HDMI CEC feature: You can control features such as

linking input switching with the input selector and players

conforming to the CEC standard, switching audio to output

it from the TV or from this unit, and adjusting the volume

using the remote controller of a CEC-compliant TV, and

automatically switching this unit to standby when the TV is

turned off.

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

BD/DVD

GAME

a

Cable/Satellite set-top

box

Streaming media

player

a HDMI cable

Setup

0 When "Yes" is selected for "4. Audio Return

Channel" in Initial Setup (P21), the HDMI CEC

function and HDMI Standby Through function are

automatically enabled. If "No, Skip" is selected,

settings are required in the System Setup menu

after Initial Setup is complete. Settings are made

in "System Setup" - "Hardware" - "HDMI" in Home

displayed by pressing on the remote

controller.

0 To enjoy digital surround sound including Dolby

Digital, audio output should be set to "Bitstream

output" on the connected Blu-ray Disc player or

other device.

17

En

3. Connect the Non-HDMI AV Component

This is an example of connection with an AV component

that does not have an HDMI jack. Select the cables to make

the connections to the AV component to match the jacks it

has. When video input connection is to the CBL/SAT jack,

the audio input connection should also be to the CBL/SAT

jacks, and so on, so that you connect the video input jacks

to the jacks with the same name as the audio input jacks.

Note that video signals input to the VIDEO IN jack will be

converted to HDMI video signals and then output from the

HDMI OUT jack.

0 To enjoy digital surround playback, such as Dolby Digital,

the audio signals need to pass through a connection via

digital coaxial cable or digital optical cable.

0 It is possible to change assignment of the input jacks you

see in the illustration at left, so you can also connect to

any jack other than CBL/SAT (P45, 46).

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

a

Cable/Satellite

set-top box

a Analog audio/video cable

Setup

0 To enjoy digital surround sound including Dolby

Digital, audio output should be set to "Bitstream

output" on the connected Cable/Satellite set-top

box or other device.

18

4. Connect the Audio Component

Example of a connection with an AV component. Use a

digital coaxial cable to connect a CD player.

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

CD

a

a Digital coaxial cable

19

En

5. Connect Other Cables

Antenna Hookup

Move the antenna around while playing the radio to find the

position with the best reception. Use a thumb tack or similar

to attach the FM indoor antenna to a wall.

Network Hookup

Connect this unit to the network using wired LAN or Wi-Fi

(wireless LAN). You can enjoy Network Functions such as

internet radio by connecting to the network. If you connect

by wired LAN, connect to the router with an Ethernet cable

to the NETWORK port as shown in the illustration. To

connect by Wi-Fi, after selecting "Wireless" in "3. Network

Connection" (P21) in Initial Setup, select the desired setting

method and follow the onscreen instructions to configure

the connection.

Power Cord Hookup

The power cord must be connected only after all other

connections are completed.

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

b

c

d

aa

(North American models)

(European, Australian

and Asian models)

a FM indoor antenna, b AM indoor antenna, c Ethernet cable, d Power cord

20

Initial Setup

Initial Setup with Auto Start-up Wizard

Initial Setup starts automatically

When you turn the unit on for the first time after purchasing

it, Initial Setup is automatically shown on the TV to enable

you to make settings required for startup using simple

operations following onscreen guidance.

1. Switch the input on the TV to that assigned to the unit.

2. Put batteries into the remote controller of this unit.

3. Press Í on the remote controller to turn the unit on.

4. Select the item with the cursors of the remote controller

and press ENTER (a) to confirm your selection. To return

to the previous screen, press (b).

0 If you terminate the procedure partway through or want

to change a setting made during Initial Setup, press

on the remote controller, and from Home select "System

Setup" - "Miscellaneous" - "Initial Setup", and press

ENTER. To select the language displayed again, change

"OSD Language" (P44).

∫ 1. Full Auto MCACC

Place the supplied speaker setup microphone in the

listening position, measure the test tones emitted by the

speakers, then the unit automatically sets the optimum

volume level for each speaker, the crossover frequencies,

and the distance from the listening position. This also

automatically adjusts the equalizers for the speakers and

enables correction of distortion caused by the acoustic

> Before Start > Part Names > Install > Initial Setup >Playback

Advanced Setup | Supplementary Information | Others

1

2 3

TV

INPUT

a

b

La pagina sta caricando ...

Pioneer VSX -832 av Manuale utente

Questo manuale è adatto anche per

Pioneer VSX -832 av Manuale utente

in altre lingue

Documenti correlati

Altri documenti