Gardena 9334-22 Manuale utente

Marca: Gardena

Modello: 9334-22

Categoria: Utensili elettrici

Tipo: Manuale utente

DE Betriebsanleitung

Gartensauger / -Bläser

FR Mode d’emploi

Aspirateur/ Souffleur électrique

IT Istruzioni per l’uso

Soffiatore /Aspiratore elettrico

EN Operating Instructions

Electric Blower/Vac

ErgoJet 2500 (EJ2500)

Art. 9334

DEFRITEN

O4 O5

Original instructions.

This product may be used under supervision, or if

instruction regarding the safe use of the product has

been provided and the resulting dangers have been

understood, by children aged 8 and above, as well as by

persons with physical, sensory or mental disabilities or a lack

of experience and knowledge. Children must not be allowed

to play with the product. Cleaning and user maintenance

must not be performed by children without supervision.

The use of this product by young people under the age of

16 is not recommended.

b) Never operate the product while people, especially children, or pets

are nearby.

Distractions can cause you to lose control.

c) Never blow debris in the direction of bystanders. The operator or user is

responsible for accidents or hazards occurring to other people or their property.

d) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

e) Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adaptor plugs with earthed (grounded) power

tools. Use only on AC mains supply voltage shown on the product rat-

ing label.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering

a power tool will increase the risk electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts. Before use, examine cord for damage.

Replace cord if there are signs of damage or ageing. Do not use the

product if the cord is damaged or worn. Immediately disconnect from

the mains electricity supply if the cord is cut, or the insulation is

damaged. Do not touch the electric cord until the electrical supply

has been disconnected. Do not repair a cut or damaged cord.

Replace it with a new one.

Damaged or entangled cords increase the risk of electric shock.

e) The electric cord must be uncoiled. Coiled cord can overheat and reduce

the efficiency of the product. Always wind cord carefully, avoiding kinks.

f) When operating a power tool outdoors, use an extension cord suita-

ble for outdoor use fitted with a coupler according to IEC 60320-2-3.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

g) If operating a power tool in a damp l ocation is unavoidable, use a

residual current device (RCD) protected supply with a tripping current

of not more than 30mA. Even with a RCD installed, 100% safety

cannot be guaranteed and safe working practices must be followed

at all times. Check your RCD every time you use your product.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in serious

personal injury.

b) Use personal protective equipment. Always wear eye protection and

hearing protection. To prevent dust irritation, the use of a dust mask

is recommended.

Protective equipment such as eye protection, hearing protection, dust mask,

nonskid safety shoes, or hard hat used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off position

before connecting to power source, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energising power tools

that have the switch on invites accidents.

d) Do not overreach. Keep proper footing and balance at all times.

On slopes, be extra careful and wear non-slip footwear. Do not walk

backwards while operating your product. Walk, never run. Do not use

ladders while operating the product.

This enables better control of the power tool in unexpected situations.

Dress properly. Always wear suitable clothing, gloves, and stout shoes.

Do not wear loose clothing or jewellery. Keep your hair, clothing

and

gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving parts.

4) Power tool use and care

a) Only use the product in the manner and for the functions described in

these instructions. Always direct the cord to the rear, away from the

product. Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better and safer at

the rate for which it was designed.

b) Always make sure your product is in a safe operating condition before

use. Do not use the power tool if the switch does not turn it on and

off. Know how to stop the product quickly in an emergency.

Any power tool that cannot be controlled with the switch is dangerous and

must be repaired.

c) The impeller continues to rotate after your product has been switched

off. The motor must be stopped and the impeller blade no longer turning to

avoid serious injury from the rotating blades.

d) Disconnect the plug from the power source:

– before removing or replacing fully assembled debris bag;

– before leaving the product unattended for any period;

– before clearing a blockage;

Important! Read the operator’s manual carefully before use and keep for

future reference.

Symbols on the product:

Read operator’s manual.

SWITCH OFF:

Remove plug from mains before cleaning or

maintenance.

Do not expose to rain.

The use of eye and ear protection is recommended.

Keep in mind, that you probably won’t hear bystanders,

which enter the working area.

Keep bystanders away.

Disconnect the mains plug if the cord

becomes damaged or entangled.

Use only with fully installed suction tube

and covered collection bag in suction mode.

Wait until the rotor blades have stopped

moving after switching off.

Do not use when wearing open hair,

loose jewellery or loose-fitting clothes.

General Power Tool Safety Warnings

WARNING: Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric

shock, fire and/or serious injury.

Save all warning and instructions for future reference. The term “power

tool” in the warnings refers to your mains operated (corded) power tool.

1) Work area safety

a) This product is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of expe-

rience and knowledge, unless they have been given supervision or

instruction concerning the use of the product by a person responsible

for their safety. Children should be supervised to ensure that they do

not play with the product. Local regulations may restrict the age of

the operator. Never allow children or people unfamiliar with these

instructions to use the product.

Power tools are dangerous in the hands of untrained users.

1. SAFETY

Intended use:

Proper use as blower:

The GARDENA blower/vacuum is suitable when used as ablower for

sweeping debris or grass clippings from driveways, sidewalks, patios,

etc. and for blowing grass clippings, straw, orleaves into piles, or removing

debris from corners, around joints, or between bricks.

Proper use as vacuum:

The GARDENA blower/vacuum is suitable when used asavacuum for

picking up dry material such as leaves, grass, small twigs, and bits of

paper.

DANGER! Risk of injury! If not used properly this product can be

dangerous. The warnings and safety instructions must be followed

to ensure reasonable safety and efficiency in using this product.

The operator is responsible for following the warnings and instruc-

tions in this manual and on the product. Never use the product

unless the guards provided by the manufacturer are in the correct

position.

2. ASSEMBLY

WARNING! Stop the unit and unplug the extension cord

before opening the inlet cover or attempting to install or

remove the blower tube or vacuum tubes.

The motor must be stopped and the impeller blades no longer turning to

avoid serious injury from the rotating blades.

Assembling for blower use:

Fitting the blower tube [ Fig. A1 ]:

NOTE: A safety switch will prevent the unit from starting if the blower

tube

is not installed correctly.

1. Align the grooves on the blower tube

with the grooves on the blower

outlet

2. Push the blower tube

onto the blower outlet

until it snaps into

place.

The blower tube is secured to the blower outlet with the tube release

button

To remove the blower tube

, press the tube release button

and pull

out the blower tube

at the same time.

Fitting the intake cover [ Fig. A2 ]:

NOTE: A safety switch will prevent the unit from starting if the intake

cover

is not latched closed.

1. Place the intake cover

on the lower opening of the garden

blower and turn the intake cover

clockwise up to the stop

(bayonet fastening).

2. Tighten the fastening screw

To remove the intake cover

, loosen the fastening screw

, turn the

intake cover

anti-clockwise and remove it.

Assembling for vacuum use:

Fitting the vacuum tube [ Fig. A3 / A4 ]:

CAUTION! Do not use the vacuum

unless the lower tube

to fitted to

the upper tube

1. Align the seams of the lower tube

and upper tube

2. Press the tubes

together until they are fully engaged.

NOTE: A safety switch will prevent the unit from starting if the vacuum

tube

is not installed correctly.

3. Place the vacuum tube

on the lower opening of the garden vacuum

and turn the vacuum tube

clockwise up to the stop (bayonet fastening).

4. Tighten the fastening screw

To remove the vacuum tube

, loosen the fastening screw

, turn the

vacuum tube

anti-clockwise and remove it.

Attaching the collection bag [ Fig. A5 ]:

NOTE: A safety switch will prevent the unit from starting if the elbow

tube

is not installed correctly.

1. Align the grooves on the elbow tube

with the grooves on the blower

outlet

2. Press the elbow tube

onto the blower outlet

until it snaps into

place.

The collection bag is secured to the blower outlet with the tube release

button

3. Clip the collection bag

into both loops

on the vacuum tube

To remove the collection bag

, press the tube release button

and pull

out the elbow tube

at the same time.

Attaching the shoulder strap [ Fig. A6 ]:

For extra support when using your unit as a vacuum, a shoulder strap is

included with your unit. Attach the strap to the unit before operation. Snap

the hook onto the retainer

3. OPERATION

WARNING! Do not use the unit without the tubes or collec-

tion bag properly attached to avoid flying debris and/or

impeller contact which can cause serious injury.

Always wear gloves and use eye protection to prevent rocks or debris

from being blown or ricocheting into the eyes and face which can result

in blindness or serious injury.

– before checking, cleaning or working on the appliance;

– if the product starts to vibrate abnormally. Check immediately. Excessive

vibration can cause injury.

– before passing to another person.

e) Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

f) Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power tool repaired

before use. Keep all cooling air inlets clear of debris.

Many accidents are caused by poorly maintained power tools.

g) Use the power tool and accessories in accordance with these instruc-

tions, taking into account the working conditions and the work to be

performed. Use the product only in daylight or good artificial light.

Use of the power tool for operations different from those intended could result

in a hazardous situation.

5) Maintenance and storage

Have your power tool serviced by a qualified repair person using only

identical replacement parts.

This will ensure that the safety of the power tool is maintained.

– Keep all nuts, bolts and screws tight to be sure the product is in a safe working

condition.

– Replace worn or damaged parts for safety.

– Use only genuine replacement parts and accessories.

– Inspect the debris bag regularly. If the debris bag becomes worn or damaged,

replace.

– Store in a cool dry place and out of reach of children. Do not store outdoors.

Blower safety warnings

•

Inspect the area before using the unit.

Remove all debris and hard objects

such as rocks, glass, wire, etc., that can

ricochet, be thrown, or otherwise cause injury or damage during operation.

• Never run the unit without the proper equipment attached.

When used as a blower, always install a blower tube. Use only recommended

attachments to prevent personal injury.

• Do not use blower near leaf or brush fires, fireplaces, barbecue pits,

ashtrays, etc. Proper use of the blower will help avoid spreading fire.

• Never place objects inside the blower tubes; always direct the blow-

ing debris away from people, animals, glass, and solid objects such

as trees, automobiles, walls, etc.

The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet

which can hurt people or animals, break glass, or cause other damage.

•

Never use for spreading chemicals, fertil izers, or any other substances.

This will prevent the spreading of toxic materials.

Vacuum safety warnings

• Stop the motor and disconnect the extension cord before opening the

air inlet door or attempting to insert or remove the vacuum tubes.

The motor must be stopped and the impeller blades no longer turning to avoid

serious injury from the rotating blades.

• Inspect the area before using the unit. Hard objects can be thrown

through the collection bag or the housing and become dangerous missiles

which can cause serious injury to the operator or others.

• Do not vacuum stones, gravel, metal, broken glass, etc. Proper use of

the unit will reduce possible personal injury and/or damage to the unit.

• Do not attempt to vacuum water or other liquids. Water or other liquids

entering a power tool will increase the risk of electric shock.

• Never run the unit without the proper equipment attached.

When used as a vacuum, always install vacuum tubes and collection bag

assembly. Make sure the collection bag assembly is completely zipped when

unit is running to avoid flying debris. Use only recommended attachments.

• Do not vacuum discarded matches, cigars, cigarettes, or ash from

fireplaces, barbecue pits, brush piles, etc. Avoid situations which could

set the collection bag on fire. To avoid spreading fire, do not use blower near

leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc.

• Always use the shoulder strap when vacuuming. This will help maintain

control of the power tool.

• Check air intake openings, elbow tube, and vacuum tubes frequently,

always with the unit stopped and the power source disconnected.

Keep vents and tubes free of debris which can accumulate and restrict proper

air flow. Do not use with any opening blocked. Keep free of dust, lint, hair and

anything that may reduce air flow.

Additional safety warnings

DANGER! Small parts can be easily swallowed. There is also a risk that

the polybag can suffocate toddlers. Keep toddlers away when you

assemble the product.

DANGER! This product makes an electromagnetic field while it operates.

This field may under some conditions interfere with active or passive

medical implants. To decrease the risk of conditions that can possibly

injure or kill, we recommend persons with medical implants to speak

with their physician and the medical implant manufacturer before you

operate the product.

Cables:

Use only 1.00 mm

size cable up to 40 metres length maximum.

Maximum rating:

1.00 mm

size cable

ErgoJet 2500 (EJ2500): 2,300 W

Mains cables and extensions are available from your local approved service

centre. Only use extension cables specifically designed for outdoor use.

Connecting the unit [ Fig. O1 / O2 ]:

CAUTION! To avoid damage to the plug, the extension cable must be

inserted into the cable lock.

1. First make a loop with the extension cable

, thread the loop into the

cable lock

and pull the extension cable tight.

2. Connect the unit’s plug to the extension cable.

3. Connect the extension cable to a 230-V mains socket.

Starting the unit [ Fig. O3 ]:

To start:

v Move the ON/OFF switch

to the ON position.

The unit starts.

To stop:

v Move the ON/OFF switch

to the OFF position.

The unit stops.

Work positions:

Blow mode [ Fig. O4 ]:

Use your unit as a blower for sweeping debris or grass clippings from

driveways, sidewalks, patios, etc. Also, for blowing grass clippings, straw,

or leaves into piles, or removing debris from corners, around joints, or

between bricks.

Direct air flow by directing the blower tube down or to one side.

Always work away from solid objects such as walks, large stones, vehicles,

and fences.

Clean corners by starting in corners and moving outward. This will help

prevent an accumulation of debris which could fly into your face. Be careful

when working near plants. The force of the air could damage tender plants.

Vacuum mode [ Fig. O5 ]:

Use your unit as a vacuum to pick up dry material such as leaves, grass,

small twigs, and bits of paper.

For best results during vacuum use, operate your unit at high speed.

Move slowly back and forth over the material as you vacuum. Avoid forcing

the unit into a pile of debris as this can clog the unit.

Keep the vacuum tube about an inch above the ground for best results.

WARNING! If the unit becomes clogged, stop the unit and

unplug the extension cord. Wait until the impeller has

completely stopped turning, then remove the vacuum

tubes. Carefully reach into the vacuum opening and clear out the

clogged debris.

This will reduce possible personal injury from the impeller.

4. STORAGE

To put into storage:

Store unit unplugged, well out of the reach of children.

1. Stop unit and disconnect from the mains electricity supply.

2. Allow motor to cool before storing or transporting.

3. Store unit with all guards in place. Position unit so that any sharp object

cannot accidentally cause injury.

Extended storage:

Prepare unit for storage at the end of the season or if it will not be used for

30 days or more.

If your blower is to be stored for a period of time:

1. Stop unit and disconnect from the mains electricity supply.

2. Clean the entire unit before lengthy storage.

3. Open inlet cover and clean any dirt, grass, or debris that has collected.

Inspect the blower and all tubes. Close and make sure the cover is

latched.

4. Use a soft brush to clean air vents and air inlet of debris. Do not use

water.

Store your unit and extension cord in a well ventilated area and covered,

if possible, to prevent dust and dirt accumulation. Do not cover with

plastic. Plastic cannot breathe and may cause condensation and even-

tual rust or corrosion.

6. Check entire unit for loose screws. Replace any damaged, worn, or

broken parts.

7. Remove tube(s) for easier storage.

Disposal:

(in accordance with RL2012/19/EC)

The product must not be disposed of to normal household waste.

It must be disposed of in line with local environmental regulations.

IMPORTANT!

v Dispose of the product through or via your municipal recycling

collection centre.

5. MAINTENANCE

WARNING! Stop the unit and disconnect the plug from the

power source before making any adjustments, changing

accessories, or performing maintenance.

Such preventive safety measures reduce the risk of starting the power

tool accidentally.

BEFORE EACH USE

Check for loose fasteners and parts:

Keep all nuts, bolts and screws tight to be sure the product is in a safe

working condition. Be sure all parts are assembled properly.

• Inlet Cover

• Blower Tube

• Vacuum Tubes

• Collection Bag

Check for damaged or worn parts:

Contact your authorized service dealer for replacement of damaged or

worn parts.

• ON / OFF Switch – Ensure switch functions properly by moving the

switch to the OFF position. Make sure motor stops; then restart motor

and continue.

• Inlet Cover – Discontinue use of unit if inlet cover fails to latch properly

or if it is damaged in any way.

AFTER EACH USE

Inspect and clean unit and labels:

DANGER! Electric shock!

Never clean the ventilation slit with a metal object.

• After each use, inspect complete unit for loose or damaged parts.

Clean the unit using a damp cloth.

• Wipe off unit with a clean dry cloth.

Clean collection bag:

IMPORTANT!

THE COLLECTION BAG MUST BE PROPERLY EMPTIED.

• You must properly empty and maintain the collection bag to avoid

deterioration and obstruction of air flow.

•

Remove the collection bag from the unit and empty after each use.

Do not store bag without emptying the bag of all contents (grass, leaves,

etc.).

• Wash the bag once a year. Remove the bag from the blower and turn

the bag inside out. Wash the bag with a water hose. Allow the bag to

hang and dry completely before you reuse the bag.

WARNING! If the unit becomes clogged, stop the unit and

unplug the extension cord. Wait until the impeller has

completely stopped turning, then remove the vacuum

tubes. Carefully reach into the vacuum opening and clear out the

clogged debris.

This will reduce possible personal injury from the impeller.

GARDENA Manufacturing GmbH grants a warranty for all original

GARDENA new products for two years from the date of original purchase

from the retailer, provided that the devices have been for private use

only. This manufacturer’s warranty does not apply to products acquired

second hand. This warranty includes all significant defects of the product

that can be proved to be material or manufacturing faults. This war ranty

is fulfilled by supplying afully functional replacement product or by repair-

ing the faulty product sent to us free of charge; we reserve the right to

choose between these options. This service is subject to the following

provisions:

• The product has been used for its intended purpose as per the recom-

mendations in the operating instructions.

• Neither the purchaser nor a third party has attempted to open or repair

the product.

• Only Original GARDENA replacement parts and wear parts have been

used for operation.

• Presentation of the receipt.

Normal wear and tear of parts and components (such as blades, blade fix-

ing parts, turbines, light bulbs, V-belts / toothed belts, impellers, air filters,

spark plugs), visual changes, wear parts and consumables are excluded

from the warranty.

This manufacturer’s warranty is limited to replacement and repair of prod-

ucts in accordance with the abovementioned conditions. The manufactur-

er’s warranty does not constitute an entitlement to lodge other claims

against us as a manufacturer, such as for damages. This manufacturer’s

warranty does not, of course, affect statutory and contractual warranty

claims against the dealer / retailer.

The manufacturer’s warranty is governed by the law of the Federal

Republic of Germany.

In case of a warranty claim, please return the faulty product, together with

a copy of the receipt and a description of the fault, with postage paid to

the service address.

Consumables:

The blower tube and vacuum tubes are wearing parts and are not covered

by the guarantee.

Removing an object from the air intake:

1. Remove the vacuum tubes.

2. Carefully reach into the vacuum opening and clear out the air intake

area. Clear all debris from impeller.

3. Inspect the impeller for cracks. If cracked or damaged, do not use the

unit. Have parts replaced by your authorized service dealer. Do not

attempt to replace them yourself.

6. TROUBLESHOOTING

WARNING! Always stop unit and unplug the extension cord

before performing all of the recommended remedies

below except remedies that require unit to be operating.

The motor must be stopped and the impeller blades no longer turning to

avoid serious injury from the rotating blades.

Problem Possible Cause Remedy

Unit fails to operate 1. Switch in the OFF (0)

position.

1. Slide switch to ON (I)

position.

2. Extension cord

disconnected.

2. Reconnect extension cord.

3. Circuit breaker tripped,

or fuse blown.

3. Reset circuit breaker or fuse.

4. Blower tube, elbow tube,

and/or vacuum tube not

installed correctly.

4.Check tube installation.

5. Collection bag is full. 5. Empty collection bag.

6. Mechanical failure. 6. Contact your authorized

service dealer.

Unit vibrates abnormally 1. Mechanical failure. 1. Contact your authorized

service dealer.

Impeller will not

turn freely

1. Debris in air intake area. 1. Clean unit. Remove any

debris.

2. Mechanical failure. 2. Contact your authorized

service dealer.

NOTE: For any other malfunctions please contact the GARDENA service depart-

ment. Repairs must only be done by GARDENA service departments or specialist

dealers approved by GARDENA.

7. TECHNICAL DATA

Electric Blower / Vac

Unit Value

ErgoJet 2500 (EJ2500)

(Art. 9334)

Motor – power consumption W Max. 2300

Mains voltage V 220 – 240

Mains frequency Hz 50

Vacuum flow l/s 170

Mulch ratio

14:1

Blow speed km/h Max. 310

Weight blower/vacuum kg Max. 4.8

Capacity of debris bag l 45

Sound pressure level L

Uncertainty k

dB (A)

1.0

Sound power level L

measured / guaranteed dB (A) 102 / 103

Hand/arm vibration a

vhw

m/s

< 2.7

NOTE: The stated vibration emission value has been measured according to

a standardized test procedure and can be used for comparison of one electric

power tool with another. It can also be used for preliminary evaluation of

exposure. The vibration emission value can vary during actual use of the electric power

tool.

8. SERVICE / WARRANTY

Service:

Please contact the address on the back page.

Warranty statement:

In the event of a warranty claim, no charge is levied to you for the services

provided.

Produktbezeichnung:

Désignation du produit :

Descrizione del prodotto:

Description of the product:

Bläser/Sauger

Souffleur/aspirateur

Soffiatore/aspiratore

Blower/vacuum

Produkttyp:

Type de produit :

Tipo di prodotto:

Product type:

ErgoJet 2500 (EJ2500)

Artikelnummer:

Référence :

Codice articolo:

Article number:

9334

EU-Richtlinien:

Directives CE :

Direttive UE:

EC-Directives:

2006/42/EG

2014/30/EG

2011/65/EG

2000/14/EG

Harmonisierte EN-Normen / Harmonised EN:

EN ISO 12100 EN 60335-1 EN 50636-2-100

Hinterlegte Dokumentation:

GARDENA Technische Dokumentation,

M. Kugler 89079 Ulm

Deposited Documentation:

GARDENA Technical Documentation,

M. Kugler 89079 Ulm

Documentation déposée:

Documentation technique GARDENA,

M. Kugler 89079 Ulm

Konformitätsbewer tungs verfahren:

Nach 2000/14/EG Art. 14

Anhang V

Conformity Assessment Procedure:

according to 2000/14/EC

Art.14 Annex V

Procédure d’évaluation de la conformité :

Selon 2000/14/CE art. 14

Annexe V

Schall-Leistungspegel: gemessen / garantiert

Niveau sonore : mesuré / garanti

Livello acustico: misurato / garantito

Noise level: measured / guaranteed

9334 102 dB(A) / 103 dB(A)

Ulm, den 03.06.2019

Fait à Ulm, le 03.06.2019

Ulm, 03.06.2019

Der Bevollmächtigte

Le mandataire

Persona delegata

Authorised representative

Reinhard Pompe

Vice President

Anbringungsjahr der CE-Kennzeichnung:

Année d’apposition du marquage CE :

Anno di applicazione della certificazione CE:

Year of CE marking:

2011

DE EU-Konformitätserklärung

Der Unterzeichner, GARDENA Germany AB, PO Box 7454, S-103 92 Stockholm, Schweden, bescheinigt hiermit, dass die nachstehend aufgeführten Produkte bei Verlassen

des Werks die harmonisierten EU-Leitlinien, EU-Normen für Sicherheit und besondere Normen erfüllen. Dieses Zertifikat verliert seine Gültigkeit, wenn die Produkte ohne unsere

Genehmigung verändert werden.

FR Déclaration de conformité CE

Le constructeur, soussigné : GARDENA Germany AB, PO Box 7454, S-103 92 Stockholm, Suède, déclare qu’à la sortie de ses usines le matériel neuf désigné ci-dessous était

conforme aux prescriptions des directives européennes énoncées ciaprès et conforme aux règles de sécurité et autres règles qui lui sont applicables dans le cadre de l’Union

européenne. Toute modification apportée à cet appareil sans notre accord annule la validité de ce certificat.

IT Dichiarazione di conformità CE

La sottoscritta GARDENA Germany AB, PO Box 7454, S-103 92 Stockholm, Svezia, certifica che il prodotto qui di seguito indicato, nei modelli da noi commercializzati, è conforme

alle direttive armonizzate UE nonché agli standard di sicu rezza UE e agli standard specifici di prodotto. Qualunque modifica apportata al prodotto senza nostra specifica autorizzazione

invalida la presente dichiarazione.

EN EC Declaration of Conformity

The undersigned, GARDENA Germany AB, PO Box 7454, S-103 92 Stockholm, Sweden, hereby certifies that, when leaving our factory, the units indicated below are in accordance

with the harmonised EU guidelines, EU standards of safety and product specific standards. This certificate becomes void if the units are modified without our approval.

DE Produkthaftung

Wir weisen ausdrücklich darauf hin, dass wir in Übereinstimmung mit dem Produkthaftungsgesetz nicht für Schäden haften, die durch unsere

Produkte entstehen, wenn diese unsachgemäß und nicht durch einen von uns autorisierten Servicepartner repariert wurden oder wenn keine

Original GARDENA Teile oder von uns zugelassene Teile verwendet wurden.

FR Responsabilité

Conformément à la loi relative à la responsabilité du fait des produits défectueux, nous déclarons expressément par la présente que nous déclinons

toute responsabilité pour les dommages résultant de nos produits, si lesdits produits n’ont pas été correctement réparés par un partenaire d’entretien

agréé GARDENA ou si des pièces d’origine GARDENA ou des pièces agréées GARDENA n’ont pas été utilisées.

IT Responsabilità del prodotto

In conformità con la Legge tedesca sulla responsabilità del prodotto, con la presente dichiariamo espressamente che decliniamo qualsiasi responsa-

bilità per danni causati dai nostri prodotti qualora non siano stati correttamente riparati presso un partner di assistenza approvato GARDENA o laddo-

ve non siano stati utilizzati ricambi originali o autorizzati GARDENA.

EN Product liability

In accordance with the German Product Liability Act, we hereby expressly declare that we accept no liability for damage incurred from our products

where said products have not been properly repaired by a GARDENA-approved service partner or where original GARDENA parts or parts authori-

sed by GARDENA were not used.

Deutschland / Germany

GARDENA

Manufacturing GmbH

Central Service

Hans

Lorenser

Straße 40

89079 Ulm

Produktfragen:

(+49) 731 490

123

Reparaturen:

(+49) 731 490

290

service

@gardena.com

Albania

COBALT Sh.p.k.

Rr. Siri Kodra

1000 Tirana

Argentina

Husqvarna Argentina S.A.

Av.del Libertador 5954

–

Piso 11

–

Torre B

(C1428ARP) Buenos Aires

Phone: (+54) 11 5194 5000

info.gardena

ar.husqvarna.com

Armenia

Garden Land Ltd.

61 Tigran Mets

0005 Yerevan

Australia

Husqvarna Australia Pty. Ltd.

Locked Bag 5

Central Coast BC

NSW 2252

Phone: (+61) (0) 2 4352 7400

customer.service

husqvarna.com.au

Austria / Österreich

Husqvarna Austria GmbH

Industriezeile 36

4010 Linz

Tel.: (+43) 732 77 01 01

485

service.gardena

husqvarnagroup.com

Azerbaijan

Firm Progress

a. Aliyev Str. 26A

1052 Baku

Belgium

Husqvarna België nv/sa

Gardena Division

Rue Egide Van Ophem 111

1180 Uccle / Ukkel

Tel.: (+32) 2 720 92 12

info

@gardena.be

Bosnia / Herzegovina

SILK TRADE d.o.o.

Industrijska zona Bukva bb

74260 Tešanj

Brazil

Husqvarna do Brasil Ltda

Av. Francisco Matarazzo,

1400

–

19º andar

São Paulo

–

CEP: 05001

903

Tel: 0800

112252

marketing.br.husqvarna

husqvarna.com.br

Bulgaria

AGROLAND България АД

бул. 8 Декември, №13

Офис 5

1700 Студентски град

София

Тел.: (+359) 2466 6910

info

@agroland.eu

Canada / USA

GARDENA Canada Ltd.

100 Summerlea Road

Brampton, Ontario L6T 4X3

Phone: (+1) 905792 93 30

info

@gardenacanada.com

Chile

Maquinarias Agroforestales

Ltda. (Maga Ltda.)

Santiago, Chile

Avda. Chesterton

# 8355 comuna Las Condes

Phone: (+56) 2 202 4417

Dalton

@maga.cl

Zipcode: 7560330

China

Husqvarna (Shanghai)

Management Co., Ltd.

富世华（上海）管理有限公司

3F, Benq Square B,

No207, Song Hong Rd.,

Chang Ning District,

Shanghai, PRC. 200335

上海市长宁区淞虹路207号明

基广场B座3楼，邮编：200335

Colombia

Husqvarna Colombia S.A.

Calle 18 No. 68 D

31, zona

Industrial de Montevideo

Bogotá, Cundinamarca

Tel. 571 2922700 ext. 105

jairo.salazar

husqvarna.com.co

Costa Rica

Compania Exim

Euroiberoamericana S.A.

Los Colegios, Moravia,

200 metros al Sur del Colegio

Saint Francis

–

San José

Phone: (+506) 297 68 83

exim_euro

@racsa.co.cr

Croatia

Husqvarna Austria GmbH

Industriezeile 36

4010 Linz

Tel.: (+43) 732 77 01 01

485

service.gardena

husqvarnagroup.com

Cyprus

Med Marketing

17 Digeni Akrita Ave

P.O. Box 27017

1641 Nicosia

Czech Republic

Husqvarna Česko s.r.o.

Türkova 2319/5b

149 00 Praha 4 – Chodov

Bezplatná infolinka:

800 100 425

servis

@cz.husqvarna.com

Denmark

GARDENA DANMARK

Lejrvej 19, st.

3500 Værløse

Tlf.: (+45) 70264770

husqvarna

@husqvarna.dk

www.gardena.com /dk

Dominican Republic

BOSQUESA, S.R.L

Carretera Santiago Licey

Km. 5 ½

Esquina Copal II.

Santiago

Dominican Republic

Phone: (+809) 736

0333

joserbosquesa

@claro.net.do

Ecuador

Husqvarna Ecuador S.A.

Arupos E1

181 y 10 de

Agosto

Quito, Pichincha

Tel. (+593) 22800739

francisco.jacome

husqvarna.com.ec

Estonia

Husqvarna Eesti OÜ

Valdeku 132

EE-11216 Tallinn

info

@gardena.ee

Finland

Oy Husqvarna Ab

Gardena Division

Lautatarhankatu 8 B / PL 3

00581 HELSINKI

www.gardena.fi

France

Husqvarna France

9/11 Allée des pierres mayettes

92635 Gennevilliers Cedex

France

http://www.gardena.com/fr

N° AZUR: 0 810 00 78 23

(Prix d’un appel local)

Georgia

Transporter LLC

8/57 Beliashvili street

0159 Tbilisi, Georgia

Phone: (+995) 322 14 71 71

Great Britain

Husqvarna UK Ltd

Preston Road

Aycliffe Industrial Park

Newton Aycliffe

County Durham

DL5 6UP

info.gardena

husqvarna.co.uk

Greece

Π.ΠΑΠΑΔΟΠΟΥΛΟΣ ΑΕΒΕ

Λεωφ. Αθηνών 92

Αθήνα

Τ.Κ.104 42

Ελλάδα

Τηλ. (+30) 210 5193100

info

@papadopoulos.com.gr

Hungary

Husqvarna Magyarország Kft.

Ezred u. 1

1044 Budapest

Telefon: (+36) 1 251

4161

vevoszolgalat.husqvarna

husqvarna.hu

Iceland

Ó. Johnson & Kaaber

Tunguhalsi 1

110 Reykjavik

ooj

@ojk.is

Ireland

Husqvarna UK Ltd

Preston Road

Aycliffe Industrial Park

Newton Aycliffe

County Durham

DL5 6UP

info.gardena

husqvarna.co.uk

Italy

Husqvarna Italia S.p.A.

Via Santa Vecchia 15

23868 VALMADRERA (LC)

Phone: (+39) 0341.203.111

assistenza.italia

it.husqvarna.com

Japan

KAKUICHI Co. Ltd.

Sumitomo Realty &

Development Kojimachi

BLDG., 8F

1 Nibanncyo

Chiyoda

Tokyo 102

0084

Phone: (+81) 33 264 4721

m_ishihara

@kaku

ichi.co.jp

Kazakhstan

LAMED Ltd.

155/1, Tazhibayevoi Str.

050060 Almaty

IP Schmidt

Abayavenue 3B

110 005 Kostanay

Korea

Kyung Jin Trading CO.,LTD.

107-4, SunDuk Bld.,

YangJae-dong,

Seocho-gu,

Seoul, (zipcode: 137-891)

Phone: (+82) (0)2 574-6300

Kyrgyzstan

Alye Maki

av. Moladaya Guardir J 3

720014

Bishkek

Latvia

Husqvarna Latvija SIA

Ulbrokas 19A

LV-1021 Rīga

info

@gardena.lv

Lithuania

UAB Husqvarna Lietuva

Ateities pl. 77C

52104 Kaunas

info

@gardena.lt

Luxembourg

Magasins Jules Neuberg

39, rue Jacques Stas

Luxembourg

Gasperich 2549

Case Postale No. 12

Luxembourg 2010

Phone: (+352) 40 14 01

api

@neuberg.lu

Mexico

AFOSA

Av. Lopez Mateos Sur # 5019

Col. La Calma 45070

Zapopan, Jalisco

Mexico

Phone: (+52) 33 3818

3434

icornejo

@afosa.com.mx

Moldova

Convel S.R.L.

290A Muncesti Str.

2002 Chisinau

Netherlands

Husqvarna Nederland B.V.

GARDENA Division

Postbus 50131

1305 AC ALMERE

Phone: (+31) 36 521 00 10

info

@gardena.nl

Neth. Antilles

Jonka Enterprises N.V.

Sta. Rosa Weg 196

P.O. Box 8200

Curaçao

Phone: (+599) 9 767 66 55

pgm

@jonka.com

New Zealand

Husqvarna New Zealand Ltd.

PO Box 76

437

Manukau City 2241

Phone: (+64) (0) 9 9202410

support.nz

@husqvarna.co.nz

Norway

Husqvarna Norge AS

Gardena Division

Trøskenveien 36

1708 Sarpsborg

info

@gardena.no

Peru

Husqvarna Perú S.A.

Jr. Ramón Cárcamo 710

Lima 1

Tel : (+51) 1 3320400 ext.416

juan.remuzgo

husqvarna.com

Poland

Husqvarna

Poland Spółka z o.o.

ul. Wysockiego 15 b

371 Warszawa

Phone: (+48) 22 330 96 00

gardena

@husqvarna.com.pl

Portugal

Husqvarna Portugal, SA

Lagoa

Albarraque

2635

595 Rio de Mouro

Tel.: (+351) 21 922 85 30

Fax : (+351) 21 922 85 36

info

@gardena.pt

Romania

Madex International Srl

Soseaua Odaii 117

123,

RO 013603 Bucure

ti, S1

Phone: (+40) 21 352.76.03

madex

@ines.ro

Russia / Россия

ООО „Хускварна“

141400, Московская обл.,

г. Химки,

улица Ленинградская,

владение 39, стр.6

Бизнес Центр

„Химки Бизнес Парк“,

помещение ОВ02_04

http: //www.gardena.ru

Serbia

Domel d.o.o.

Autoput za Novi Sad bb

11273 Belgrade

Phone: (+381) 118 48 88 12

miroslav.jejina

@domel.rs

Singapore

Ray PRIVATE LIMITED

40 Jalan Pemimpin

#02

08 Tat Ann Building

Singapore 577185

Phone: (+65) 6253 2277

shiying

@hyray.com.sg

Slovak Republic

Husqvarna Česko s.r.o.

Türkova 2319/5b

149 00 Praha 4 – Chodov

Bezplatná infolinka:

800 154 044

servis

@sk.husqvarna.com

Slovenia

Husqvarna Austria GmbH

Industriezeile 36

4010 Linz

Tel.: (+43) 732 77 01 01

485

service.gardena

husqvarnagroup.com

South Africa

Husqvarna

South Africa (Pty) Ltd

Postnet Suite 250

Private Bag X6,

Cascades, 3202

South Africa

Phone: (+27) 33 846 9700

info

@gardena.co.za

Spain

Husqvarna España S.A.

Calle de Rivas nº10

28052 Madrid

Phone: (+34) 91 708 05 00

atencioncliente

@gardena.es

Suriname

Agrofix n.v.

Verlengde Hogestraat #22

Phone: (+597) 472426

agrofix

@sr.net

Pobox : 2006

Paramaribo

Suriname

–

South America

Sweden

Husqvarna AB

Gardena Division

561 82 Huskvarna

gardenaorder

@husqvarna.se

Switzerland / Schweiz

Husqvarna Schweiz AG

Consumer Products

Industriestrasse 10

5506 Mägenwil

Phone: (+41) (0) 62 887 37 90

info

@gardena.ch

Turkey

Dost Bahçe Dış Ticaret

Mümessillik A.Ş

Yunus Mah. Adil Sok. No:3

Ic Kapi No: 1 Kartal

34873 Istanbul

Phone: (+90) 216 38 93 939

info

@dostbahce.com.tr

Ukraine / Україна

ТОВ «Хускварна Україна»

вул. Васильківська, 34,

офіс 204

03022, м. Київ

Тел. (+38) 044 498 39 02

info

@gardena.ua

Uruguay

FELI SA

Entre Ríos 1083 CP 11800

Montevideo

–

Uruguay

Tel: (+598) 22 03 18 44

info

@felisa.com.uy

Venezuela

orporación Casa y Jardín C.A.

Av. Caroní, Edif. Trezmen, PB.

Colinas de Bello Monte.

1050 Caracas.

Tlf: (+58) 212 992 33 22

info

@casayjardin.net.ve

0000

20.960.08/ 0618

GARDENA

Manufacturing GmbH

D-89070 Ulm

http://www.gardena.com

9334-22.960.01/0619

Manufacturing GmbH

D-89070 Ulm

http://www.gardena.com

Gardena 9334-22 Manuale utente

Marca: Gardena

Modello: 9334-22

Categoria: Utensili elettrici

Tipo: Manuale utente

Scarica PDF

rapporto

in altre lingue

English: Gardena 9334-22 User manual

Gardena 9334-22 Manuale utente

Gardena 9334-22 Manuale utente

in altre lingue

Documenti correlati

Altri documenti