COMMISSIONING
The device must be completely removed from its packaging and the protections must be completely
removed.
Place the device on a solid, stable, flat and non-flammable surface.
Do not lean the device against the wall.
Do not install the device near open fires or other heating devices.
It is forbidden to place flammable objects on or near the device.
Make sure that all ventilation openings are not blocked.
Make sure the device is positioned for optimal use.
The device must be electrically protected upstream with an appropriate safety device.
The device must be plugged directly into a wall socket and not into a power strip.
Let the appliance warm up for 15 minutes before first use.
USE
Connect the device to a grounded power outlet.
Adjust the temperature according to the food chosen.
Place food in appropriate containers before putting it inside.
Some parts of the appliance can be very hot, always use protective gloves when placing or removing food.
Turn on the interior light if necessary using the unit's light switch.
Unplug the appliance from the mains socket at the end of use.
6. CLEANING AND MAINTENANCE
6.1 Safety instructions
Any maintenance, cleaning, repair of the appliance must be done with the appliance unplugged (isolated from
all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited. Water must not get inside the
device.
Never immerse the appliance in water or any other liquid.
Use the Casselin brand products provided for this purpose.
WARNING
The device cannot be cleaned with a direct water jet (no pressurized water jet).
6.2 Daily maintenance
Unplug the device
Clean the inside and outside of the device with a soft, damp cloth and mild detergent.
Clean the positioning grids and the body of the appliance with a soft, damp cloth and a mild detergent.
Use only a soft cloth and be careful never to use abrasive agents or pads that could scratch the surface. After
the cleaning procedure, use a soft, dry cloth to wipe and polish the surface.
Make sure the device has been cleaned properly before storing it in a dry place.
6.3 Safety instructions for the maintenance of the device
Daily check that the power cord is not damaged. Never use the appliance when the cord is damaged. If the
cord has any faults, it must be replaced by a qualified technician.
In the event of a fault, contact your dealer.
Any maintenance or repair work should only be carried out by a professional.
REMARK
In the event of a trip, unplug the appliance, let it cool down and contact your retailer. If the unit does not start,
check your power cord. The device must not be plugged into a power strip but directly into a wall socket. For
any other anomaly, contact your dealer.