Panasonic UT-MA6 Manuale del proprietario

Marca: Panasonic

Modello: UT-MA6

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

UT-MB5

Getting Started

Useful Information

Troubleshooting

Appendix

OPERATING INSTRUCTIONS

Personal Computer

Model No. UT-MA6 series

Please print and use pages

containing important descriptions

for software installation, etc.

Please read these instructions carefully before using this product, and save this manual for future use.

Contents

Getting Started

Introduction ......................................................

Description of Parts .........................................

First-time Operation .........................................

Turning On / Turning Off ..................................

Useful Information

Handling and Maintenance ............................

Reinstalling Software .....................................

Troubleshooting

Troubleshooting (Basic) .................................

Appendix

LIMITED USE LICENSE AGREEMENT ........

Specifications ................................................

Standard Limited Warranty ............................

Getting Started

Introduction

Thank you for purchasing this Panasonic product. For optimum performance and safety, please read

these instructions carefully.

■ Terms and illustrations in these instructions

CAUTION

Conditions that may result in minor or moderate injury.

NOTE

Useful and helpful information.

è :

Page in these Operating Instructions or in the Reference Manual.

Reference to the on-screen manuals.

Open the charms : Swipe in from the right edge of the screen.

Touch

: Touch (Settings) in the charms.

F12

Press F12 key.

●

Some illustrations are simplified to help your understanding and may look different from the actual

unit.

●

If you do not sign in as an administrator, you cannot use some functions or cannot display some

screens.

●

Refer for the latest information about optional products to the catalogs, etc.

●

In these instructions, the names and terms are referred as follows.

•

“Windows

8.1 Pro Update 64-bit” as “Windows” or “Windows 8.1”

•

DVD MULTI drive as “DVD drive”

●

Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are

different from the actual screen messages. For example, [Flight mode] may be displayed instead

of [Airplane mode] in some language preference)

■ Disclaimer

Computer specifications and manuals are subject to change without notice. Panasonic Corporation

assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies

between the computer and the manuals.

■ Trademarks

Microsoft

, Windows

, and the Windows logo are registered trademarks of Microsoft Corporation of

the United States and/or other countries.

Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel

Corporation.

SDXC Logo is a trademark of SD-3C, LLC.

Bluetooth

is a registered trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Panasonic

Corporation.

NVIDIA, the NVIDIA logo and QUADRO are trademarks and/or registered trademarks of NVIDIA

Corporation in the U.S. and/or other countries.

DisplayPort is a trademark owned by the Video Electronics Standards Association in the United

States and other countries.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks

of their respective own companies.

Getting Started

■ On-screen Manual

For further information about the computer, you can refer to the on-screen manual.

●

Reference Manual

The Reference Manual contains the practical information to help you fully enjoy the computer’s

performance.

●

Important Battery Tips

The Important Battery Tips will provide you with the battery information so that you can use the

built-in battery in the optimum condition to obtain longer operation time.

To access the on-screen manuals, follow the steps below.

On the Start screen, touch the [Manual Selector] tile, and select the on-screen manual.

Getting Started

Description of Parts

Front side Left side

A C

Camera

Reference Manual “Camera”

A: Camera Indicator

B: Camera Lens

C: Ambient Light Sensor

The ambient light sensor is equipped

with an automatic brightness adjustment

function that adjusts the display screen.

(è page 11)

D: Wireless LAN Antenna / Bluetooth

Antenna

Reference Manual “Wireless LAN”

“Bluetooth”

E: Wireless LAN Antenna

Reference Manual “Wireless LAN”

F: Windows Button

è Reference Manual “Hardware

Buttons”

G: Power Switch

H: Hardware Buttons /

è Reference Manual “Hardware

Buttons”

I: LED Indicator

: Power Indicator

Off: Power off/Hibernation

Green: Power on

Blinking green: Sleep

: Drive status

: SD Memory Card status

(Blinking: During access or a password

is requested)

è Reference Manual “SD Memory

Card”

: Battery status

è page 10 “When the battery indicator

does not light on”

è Reference Manual “Battery

Power”

J: Security Hook

Pull out the security hook when passing

through a security cable. Store the security

hook during normal use.

(The insulation coating has been applied to

the metal part.)

For further information, read the manual that

comes with the cable.

Getting Started

Rear side Right side

I H

C D

A: Ventilation Hole (Exhaust)

B: Ventilation Hole (Intake)

Rear Camera

Reference Manual “Camera”

C: Camera Indicator

D: Camera Lens

E: Smart Card Slot

Reference Manual “Smart Card”

F: Microphone

G: Speaker

H: Expansion Bus Connector

Reference Manual “Cradle”

I: Ventilation Hole (Intake) / Speaker

J: Reset Button (For servicing by

Panasonic)

K: Headphone Jack

A headphone can be connected.

L: SD Memory Card Slot

Reference Manual “SD Memory Card”

M: USB3.0 Port

Reference Manual “USB Devices”

N: DC-IN jack

O: Mini DisplayPort

Reference Manual “External Display”

P: LAN port

Reference Manual “LAN”

This computer contains a

magnet and magnetic products

at the locations circled in the

illustration at right.

Avoid leaving metallic object or

magnetic media in contact with

these areas.

Getting Started

First-time Operation

■ Preparation

Check and identify the supplied accessories.

If you do not find the described accessories, contact Panasonic Technical Support.

•

AC Adaptor . . .

Model No:

CF-AA5713A

• AC Cord . . . . 1 • Soft Cloth . . . 1

è Reference Manual

“Screen Input Operation”

• Operating Instructions (CD-ROM / -R) . . . . . . . . . . . . . . . . . . . . . . 1

• Safety Precautions and Regulatory Information . . . . . . . . . . . . . 1

• Before using this computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s

packaging (è page 25).

1 Connect your computer to a power outlet

The battery charging starts automatically.

CAUTION

●

Do not disconnect the AC adaptor until the first-time

operation procedure is completed.

●

When using the computer for the first time, do not

connect any peripheral device except AC adaptor.

●

Handling the AC adaptor

•

Problems such as sudden voltage drops may arise

during periods of thunder and lightning. Since this

could adversely affect your computer, an uninterruptible

power source (UPS) is highly recommended unless

running from the built-in battery alone.

2 Turn on the computer

Press and hold the power switch until the power indicator lights (è page 4).

CAUTION

●

Do not press the power switch repeatedly or do not hold the power switch for four seconds or longer.

●

Any changes from the default setting of the Setup Utility must not be made until the First-time

Operation is completed.

3 Select language

Select language and touch [Next].

Follow the on-screen instructions.

4 Setup Windows

Follow the on-screen instructions.

●

The computer restarts several times. Wait until the drive indicator has turned off.

●

After the computer is turned on, the screen remains black or unchanged for a while, but this is

not a malfunction. Wait for a moment until the Windows setup screen appears.

●

Setup of Windows will take approximately 5 minutes.

Go to the next step, confirming each message on the display.

●

If "Get online" is displayed, select [Skip this step].

You can set the Wireless Network after the setup of Windows is complete.

Getting Started

CAUTION

●

You can change the user name, password, image and security setting after setup of Windows.

●

Remember your password. If you forget the password, you cannot use Windows. Creating a

password reset disk beforehand is recommended.

●

Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9,

LPT1 to LPT9, @, &, space. In particular, if you create a user name (account name) that includes

the “@” mark, a password will be requested at the sign-in screen, even if no password has been

set. If you try to sign in without entering a password, “The user name or password is incorrect.”

may be displayed and you will not be able to sign in (è page 22).

5 Create the recovery disc

A recovery disc allows you to install OS and restore its factory default condition, in case, for

example, the recovery partition of the flash memory is damaged. We recommend creating a

recovery disc before you begin using the computer.

Refer to è Reference Manual “Recovery Disc Creation Utility” about creating the disc.

NOTE

●

PC Information Viewer

This computer periodically records the management information of the flash memory, etc. The

maximum data volume for each record is 1024 bytes.

This information is only used for estimating the cause when the flash memory goes down by any

possibility. They are never sent to outside via network nor used for any other purpose except for

the purpose described the above.

To disable the function, add the check mark for [Disable the automatic save function for

management information history] in [Hard Disk Status] of PC Information Viewer, and touch [OK].

(è

Reference Manual “Troubleshooting (Advanced)” - “Checking the Computer’s Usage

Status”)

●

In the default settings, a shortcut icon for Korean language is on the desktop screen. You may

delete the icon if not necessary.

■ Battery duration

Note that the computer consumes electricity even when the computer power is off. If the built-in

battery is fully charged, the battery will fully discharge in the following period of time:

Status Discharge period

In sleep Approx. 4 days

(Approx. 3 days with Wake Up from wired LAN function activated)

In hibernation Approx. 49 days

(Approx. 7 days with Wake Up from wired LAN function activated)

When power is off Approx. 49 days

(Approx. 7 days with Power On by LAN function activated)

The above table shows the battery duration while the USB port continuous charging function is not

used.

The battery duration will slightly be longer if a LAN cable is not connected to the computer, even

when Wake Up from wired LAN function is activated.

Getting Started

■ Before using wireless function

Open the charms, and touch - [Change PC settings] - [Network] - [Airplane mode

Set "Airplane mode

" to [Off], and then;

set "Wi-Fi" to [On] (for wireless LAN).

set "Bluetooth" to [On] (for Bluetooth).

: Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are

different from the actual screen messages. For example, [Flight mode] may be displayed

instead of [Airplane mode] in some language preference.)

■ To change the partition structure

You can shrink a part of an existing partition to create unallocated disk space, from which you can

create a new partition. In the default setting, you can use a single partition.

Perform the following procedure.

●

Long touch at the bottom left corner of the desktop screen.

Touch [Disk Management].

Long touch the partition for Windows (“c” drive in the default setting), and touch [Shrink

Volume…].

●

The partition size depends on the computer specifications.

Input the size in "Enter the amount of space to shrink in MB" and touch [Shrink].

●

You cannot input a larger number than the displayed size.

●

To select [Reinstall to the OS related partitions.] in installing OS (è page 17),

70 GB or more is necessary for "Total size after shrink in MB".

Long touch [Unallocated] (the shrunk space in the step ) and touch [New Simple Volume…].

Follow the on-screen instructions to make the settings, and touch [Finish].

Wait until formatting is completed.

NOTE

●

You can create an additional partition using remaining unallocated space or newly creating

unallocated space.

●

To delete a partition, long touch the partition and touch [Delete Volume…] in the step .

■ To select language

To select a language other than the one you have selected during the first-time operation, follow the

steps below.

Perform either of the following procedures.

●

Long touch at the bottom left corner of the desktop screen.

●

Slide up from the middle of the Start screen with a finger.

Touch [Control Panel].

Touch [Clock, Language, and Region] - [Language] - [Add a language].

Select a language, and then touch [Add].

Depending on the region, two or more languages are selectable. Touch [Open] and select the

desired language, and then touch [Add].

Touch [Options] for the language you want to use.

Touch [Make this the primary language].

Touch [Log off now].

First-time Operation

Getting Started

Turning On

Press and hold the power switch until the power indicator lights (è page 4).

NOTE

●

Do not press the power switch repeatedly.

●

The computer will forcibly be turned off if you press and hold the power switch for four seconds or

longer.

●

Once you turn off the computer, wait for ten seconds or more before you turn on the computer

again.

●

Do not perform the following operation until the drive indicator turns off.

•

Connecting or disconnecting the AC adaptor

•

Pressing the power switch

•

Touching the screen or external mouse/keyboard

Turning Off

Shut down the computer.

1. Open the charms, and touch .

2. Touch [Power] - [Shut down].

NOTE

●

To turn off the computer completely, proceed as follows.

Open the charms, and touch - [Change PC settings] - [Update and recovery] - [Recovery].

Touch [Restart now] under "Advanced startup".

Touch [Turn off your PC].

Precaution against Starting Up/Shutting Down

●

Do not do the following

•

Connecting or disconnecting the AC adaptor

•

Pressing the power switch

•

Touching the screen or external mouse/keyboard

NOTE

●

To conserve power, the following power saving methods are set at the time of purchase.

•

The screen automatically turns off after:

10 minutes (when AC adaptor is connected) of inactivity

5 minutes (when operating on battery power) of inactivity

•

The computer automatically enters sleep

after:

20 minutes (when AC adaptor is connected) of inactivity

15 minutes (when operating on battery power) of inactivity

Refer to Reference Manual “Sleep or Hibernation Functions” about resuming from sleep.

Turning On / Turning Off

Useful Information

Handling and Maintenance

Operation environment

●

Place the computer on a flat stable surface not subject to shock, vibration, and danger of

dropping. Do not place the computer upright or turn it over. If the computer is exposed to an

extremely strong impact, it may become damaged.

●

Operating environment

Temperature: Operation : 5 °C to 35 °C

Storage : -20 °C to 60 °C

Humidity: Operation : 30% to 80% RH (No condensation)

Storage : 30% to 90% RH (No condensation)

Even within the above temperature/humidity ranges, operation for a long time in extreme

environments, smoking nearby, or operation in places where oil is used or where there is a lot of

dust will result in the product deterioration and will shorten the product life.

●

Do not place the computer in the following areas, otherwise the computer may be damaged.

•

Near electronic equipment. Image distortion or noise may occur.

•

In extremely high or low temperature.

●

As the computer can become hot during operation, keep it away from items that are sensitive to

heat.

Handling cautions

This computer is designed to minimize shock to parts such as the LCD and the flash memory

drive, but no warranty is provided against any trouble caused by shock. Be extremely careful when

handling the computer.

●

When carrying the computer:

•

Turn off the computer.

•

Remove all external devices, cables, Smart Cards and other protruding objects.

•

Do not drop or hit the computer against solid objects.

•

Do not grip the display part.

●

When you board an airplane, take the computer with you and never put it in your checked

luggage. When using the computer on airplane, follow the airline’s instructions.

•

To use airplane mode

Open the charms, and touch - [Change PC settings] - [Network] - [Airplane mode

Set "Airplane mode

" to [On].

Confirm that all wireless devices are set to [Off].

: Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are

different from the actual screen messages. For example, [Flight mode] may be displayed

instead of [Airplane mode] in some language preference.)

●

Use only your fingers or the dedicated electronic touch pen (optional) to touch the screen. Do not

place any object on its surface and do not press down strongly with sharp-pointed or hard objects

that may leave marks (e.g., nails, pencils and ball point pens).

●

Avoid any harmful substances such as oil from getting into the touchscreen. The pointer may not

work correctly.

●

Be careful not to get injured by dropping or getting hit when carrying the computer.

■ When the battery indicator does not light on

The battery indicator may not light on even if the AC adaptor is correctly connected to the computer,

due to the following reasons.

●

The AC adaptor’s protection function may be working. In this case, pull out the AC cord and wait

for more than 1 minute before reconnecting the AC cord.

Useful Information

■ When using peripheral devices

Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully

read the instruction manuals of the peripheral devices.

●

Use the peripheral devices conforming to the computer’s specifications.

●

Connect to the connectors in the correct direction.

●

If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of

pins, etc.

●

If screws are included, fasten them securely.

●

Remove the cables when you carry the computer. Do not pull the cables forcibly.

■ Preventing your computer from unauthorized use via wireless LAN/Bluetooth

●

Before using wireless LAN/Bluetooth, make the appropriate security settings such as data

encryption.

■ Battery Recalibration

●

The battery recalibration may take a long time due to the large battery capacity. This is not a

malfunction.

•

Full charge: Approximately 2.5 hours

•

Complete discharge: Approximately 2 hours

When performing “Battery Recalibration” without shutting down Windows, it may take more time to

charge/discharge.

■ Sensors

This computer is equipped with four sensors (acceleration sensor, gyro sensor, magnetic sensor,

ambient light sensor), and you can use these sensors with any software that is compatible.

As the accuracy of each sensor output is dependent on the operating environment and other

conditions, the results should only be used as a reference.

The acceleration sensor, gyro sensor, and magnetic sensor are located at the bottom left of the LCD.

The detection results of each sensor may vary depending on how you are holding the computer, the

application software you are using, and other factors.

●

Automatic brightness adjustment

The computer is equipped with an automatic brightness adjustment function that adjusts the

display screen based on the ambient light sensor. You can configure the automatic adjustment

function as follows.

Open the charms, and touch - [Change PC settings] - [PC and devices] - [Power and sleep].

Set "Adjust my screen brightness automatically" to [On].

The ambient light sensor is located at the top of LCD.

The ambient light cannot be detected properly if this area is obstructed or dirty.

Useful Information

Handling and Maintenance

●

Magnetic sensor

The magnetic sensor on the computer operates by detecting geomagnetism. Therefore, the

magnetic sensor may not function properly and it readings may be inaccurate, especially in the

following environments.

•

Inside or near steel structures such as buildings or bridges

•

Inside or near automobiles, or near train power lines

•

Near metallic furniture or appliances

•

When the AC adaptor or other peripheral devices are brought closer to the computer

•

Near magnets, speakers, or other objects with strong magnetic fields

The magnetic directions indicated by the magnetic sensor may not be accurate immediately after

purchase or in environments with poor magnetic fields.

In such cases, turn on the computer and move it as follows.

Hold the computer so that its screen side is facing upward and level.

While keeping the computer level, rotate it 90 degrees or more clockwise.

Return the computer to position , and rotate it 90 degrees or more counterclockwise.

Return the computer to position .

Tilt the computer 90 degrees or more to the left so that the left side of the computer tilts down.

Return the computer to position , and tilt it 90 degrees or more to the right so that the right

side of the computer tilts down.

CAUTION

●

Hold the computer firmly when moving it. Strong shocks from dropping the computer may

result in damage.

Maintenance

If drops of water or other stains get on the surface of the LCD panel, wipe them off immediately.

Failure to do so may result in staining.

To clean the LCD panel

Use the soft cloth included with the computer. (For further information, refer to “Suggestions About

Cleaning the LCD Surface” è Reference Manual “Screen Input Operation”.)

To clean areas other than the LCD panel

Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted

detergent and wring it thoroughly.

CAUTION

●

Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing

discoloration, etc. Do not use commercially-available household cleaners and cosmetics, as they

may contain components harmful to the surface.

●

Do not apply water or detergent directly to the computer, since liquid may enter inside of the

computer and cause malfunction or damage.

Useful Information

Dispose of Computer

Attention Customers

Don't remove the battery by yourself. The battery must be removed by qualified professionals.

When disposing of this product, be sure to contact qualified professionals to remove the battery.

Attention Qualified professionals to remove the battery

Dispose of this product correctly in accordance with the local regulations after removing the battery

as shown in the following procedure.

■ Preparation

●

Remove all peripherals (SD memory card, etc.).

●

Erase the stored data. (è Reference Manual “Erasing Flash Memory Data”)

CAUTION

●

Never disassemble the computer except before disposal.

●

Refer to “Safety Precautions and Regulatory Information” for precautions when disposing of the

computer.

1. Turn off the computer completely. (è page 9)

●

Do not use sleep/hibernation.

2. While connecting the AC adaptor, press both volume buttons ( and ) at the same time

for more than five seconds.

The built-in battery’s power output stops.

●

Disconnect the AC adaptor, and press the power button for 1 second or longer and confirm

the computer does not start up.

3. Turn over the computer, and peel off the seal (A) on the side

of Interface cover with a thin pointed tool.

4. Remove the screws (3), and lift up Interface cover to remove.

Useful Information

Handling and Maintenance

5. Remove the silver screw.

6. Remove the screws (10).

7. Unhook the claws on the upper part of the cover ( ), and

open the cover from the right side ( ).

●

The left side of the cover is connected to the computer

with the cord. Do not pull the cord.

8. Disconnect the connector (B).

Insulate the connectors on the built-in battery by covering

them with plastic tape, for example.

9. Remove the screws (7) that secures the built-in battery

(C), and remove the built-in battery.

Useful Information

Reinstalling Software

Reinstalling software will return the computer to the default condition. When you reinstall the

software, the flash memory data will be erased.

Back up important data to other media or an external hard disk before reinstallation.

CAUTION

●

Do not delete the Recovery Partition on the flash memory. The Recovery Partition is not available

to store data.

To check the Recovery Partition, perform the following methods.

Perform the following procedure.

●

Long touch at the bottom left corner of the desktop screen.

Touch [Disk Management].

NOTE

●

You can use the following buttons instead of the keyboard (è page 4).

: ↓ key

: ↑ key

: Enter key

: F2 key (Default setting)

●

Connect the AC adaptor and do not remove it until reinstallation is complete.

■ Remove everything and reinstall Windows

You can reinstall the OS that was pre-installed at the time of purchase (Windows 8.1).

Preparation

●

<Only for model with TPM> Connect the external keyboard.

●

Remove all peripherals.

1 Perform “Remove everything and reinstall Windows”.

Open the charms, and touch - [Change PC settings] - [Update and recovery] -

[Recovery].

Touch [Get Started] under "Remove everything and reinstall Windows".

Touch [Next].

Select the option.

•

[Just remove my files]

Perform the reinstallation of Windows in a few moments (Approximately 20 minutes).

•

[Fully clean the drive]

By fully cleaning, the deleted files can not be recovered easily and the security level will

be increased. The processing time will be longer (Approximately 140 minutes).

Follow the on-screen instructions.

After the reinstallation, the computer will restart.

●

Do not interrupt installation, for example by turning off the computer or performing other

operation.

Otherwise installation may become unavailable as Windows may not start up or the data

may be corrupted.

2 Perform the “First-time Operation” (è page 6).

NOTE

●

The date and time, and the time zone may not be correct. Be sure to set them correctly.

3 Perform Windows Update.

Useful Information

4 <Only for model with TPM> Clear TPM.

Perform either of the following procedures.

●

Long touch at the bottom left corner of the desktop screen.

●

Slide up from the middle of the Start screen with a finger.

Touch [Run], then input "tpm.msc" and touch [OK].

Touch [Clear TPM ...] under "Actions" on the right of the "TPM Manager on Local Computer"

screen.

Touch [Restart] of the "Clear the TPM security hardware" screen.

The computer will restart.

When "TPM configuration change was requested to ..." is displayed, press

F12

Touch the Desktop tile, and when "TPM is ready" appears, touch [Close].

■ Flash memory Recovery

If the problem persists after performing “Remove everything and reinstall Windows”, follow the

instructions below.

Preparation

●

<Only for model with TPM> Connect the external keyboard.

●

Remove all peripherals.

1 Start the Setup Utility.

Open the charms, and touch - [Change PC settings] - [Update and recovery] -

[Recovery].

Touch [Restart now] under "Advanced startup".

Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].

●

If the password is requested, enter the Supervisor Password.

2 Write down all of the contents of the Setup Utility and touch [Exit] and

double-touch [Load Default Values].

At the confirmation message, touch [Yes].

3 Check the [UEFI Boot] setting of the Setup Utility.

When reinstalling Windows 8.1: [Enabled]

4 Touch [Exit] and double-touch [Save Values and Reboot].

At the confirmation message, touch [Yes].

Computer will restart.

5 Press (Rotation lock) button while "Panasonic" boot screen is

displayed.

The Setup Utility starts up.

●

If the password is requested, enter the Supervisor Password.

6 Touch [Exit] and double-touch [Recovery Partition].

7 Touch [Next].

8 Touch [YES].

9 At the License Agreement screen, touch [Yes, I agree to the provisions

above and wish to continue!] and touch [Next].

Reinstalling Software

Useful Information

10 Touch [Next].

If the option is displayed, select the setting and touch [Next].

●

[Reinstall Windows to the System Disk to factory default.]

Select this option when you want to install Windows to the factory default. After installation,

you can create a new partition. For how to create a new partition, refer to “To change the

partition structure” (è page 8).

●

[Reinstall to the OS related partitions.]

Select this option when the flash memory has already been divided into several partitions.

For how to create a new partition, refer to “To change the partition structure” (è page 8).

You can keep the partition structure.

This does not appear if Windows cannot be installed to the recovery partition and the area usable

by Windows.

11 At the confirmation message, touch [YES].

Installation starts according to the instructions on the screen. (It will take approximately

20 minutes.)

●

Do not interrupt installation, for example by turning off the computer or other operation.

Otherwise installation may become unavailable as Windows may not start up or the data

may be corrupted.

12 When Ending process screen is displayed, touch [OK] to turn off the

computer.

13 Perform the “First-time Operation” (è page 6).

NOTE

●

The date and time, and the time zone may not be correct. Be sure to set them correctly.

●

If the password is requested, enter the Supervisor Password.

14 Start the Setup Utility and change the settings as necessary.

15 Perform Windows Update.

16 <Only for model with TPM> Clear TPM (è page 16).

Useful Information

Reinstalling Software

■ Using Recovery Disc

Use the Recovery Disc in the following conditions.

•

You have forgotten the administrator password.

•

Installation is not complete. The recovery partition in the flash memory may be broken.

Preparation

●

Prepare the following items:

•

Recovery Disc (è Reference Manual “Recovery Disc Creation Utility”)

•

USB DVD drive (optional) (refer to recent catalogs and other sources for information

about the products available)

•

<Only for model with TPM> External keyboard

●

Remove all peripherals (except for the USB DVD drive).

1 Connect the DVD drive to the USB port.

2 Start the Setup Utility.

Open the charms, and touch - [Change PC settings] - [Update and recovery] -

[Recovery].

Touch [Restart now] under "Advanced startup".

Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].

●

If the password is requested, enter the Supervisor Password.

3 Write down all of the contents of the Setup Utility and touch [Exit] and

double-touch [Load Default Values].

At the confirmation message, touch [Yes].

4 Check the [UEFI Boot] setting of the Setup Utility.

When installing Windows 8.1: [Enabled]

5 Set the Recovery Disc into the DVD drive.

6 Touch [Exit] and double-touch [Save Values and Reboot].

At the confirmation message, touch [Yes].

The computer will restart.

7 Press (Rotation lock) button while "Panasonic" boot screen is

displayed.

The Setup Utility starts up.

●

If the password is requested, enter the Supervisor Password.

8 Touch [Exit], then double-touch your DVD drive in [Boot Override].

The computer will restart.

9 Touch [Reinstall Windows.] and touch [Next].

10 Touch [YES].

11 At the License Agreement screen, touch [Yes, I agree to the provisions

above and wish to continue!] and touch [Next].

Useful Information

12 Touch [Next].

If the option is displayed, select the setting and touch [Next].

●

[Reinstall Windows to the System Disk to factory default.]

Select this option when you want to install Windows to the factory default. After installation,

you can create a new partition. For how to create a new partition, refer to “To change the

partition structure” (è page 8).

●

[Reinstall to the OS related partitions.]

Select this option when the flash memory has already been divided into several partitions.

For how to create a new partition, refer to “To change the partition structure” (è page 8).

You can keep the partition structure.

This does not appear if Windows cannot be installed to the recovery partition and the area usable

by Windows.

13 At the confirmation message, touch [YES].

Installation starts according to the instructions on the screen. (It will take approximately

30 - 45 minutes.)

●

Do not interrupt installation, for example by turning off the computer.

Otherwise installation may become unavailable as Windows may not start up or the data

may be corrupted.

14 When the "Insert No.2 Media into optical drive." message is displayed,

replace with the other disc and then touch [OK].

15 When Ending process screen is displayed, remove the Recovery Disc

and DVD Drive and then touch [OK].

Follow the on-screen instructions.

Some models may take approximately 40 minutes.

16 Perform the “First-time Operation” (è page 6).

NOTE

●

The date and time, and the time zone may not be correct. Be sure to set them correctly.

17 Start the Setup Utility and change the settings as necessary.

18 Perform Windows Update.

19 <Only for model with TPM> Clear TPM (è page 16).

Connect the external keyboard.

Troubleshooting

Troubleshooting (Basic)

Follow the instructions below when a problem has occurred. There is also an advanced

troubleshooting guide in the “Reference Manual”. For a software problem, refer to the software’s

instruction manual. If the problem persists, contact Panasonic Technical Support. You can also check

the computer’s status in the PC Information Viewer

(è Reference Manual “Troubleshooting (Advanced)”).

■ Starting Up

Cannot start up.

The power indicator or

battery indicator is not

lit.

●

Connect the AC adaptor.

●

Remove the AC adaptor, and then connect it again.

●

If a device is connected to the USB port, disconnect the device, or set

[USB Port] or [Legacy USB Support] to [Disabled] in the [Advanced]

menu of the Setup Utility.

●

Check the [UEFI Boot] setting of the Setup Utility. [UEFI Boot] should

be set to [Enabled].

You have forgotten the

password.

●

Supervisor Password or User Password: Contact Panasonic Technical

Support.

●

Administrator password:

•

If you have a password reset disk, you can reset the administrator

password. Set the disk and enter any wrong password, then follow

the on-screen instructions and set a new password.

•

If you do not have a password reset disk, reinstall (è page 15) and set

up Windows, and then set a new password.

“Remove disks or other

media. Press any key

to restart” or a similar

message appears.

●

If a device is connected to the USB port, disconnect the device, or set

[USB Port] or [Legacy USB Support] to [Disabled] in the [Advanced]

menu of the Setup Utility.

●

If the problem persists after removing the disk, it may be a flash

memory failure. Contact Panasonic Technical Support.

Windows startup and

operation is slow.

●

Start the Setup Utility (è Reference Manual “Setup Utility”) to

return the Setup Utility settings (excluding the passwords) to the

default values. Start the Setup Utility and make the settings again.

(Note that the processing speed depends on the application software,

so this procedure may not make Windows faster.)

●

If you installed a resident software after purchase, turn off the

residence.

The date and time are

incorrect.

●

Make the correct settings.

Perform either of the following procedures.

●

Long touch at the bottom left corner of the desktop screen.

●

Slide up from the middle of the Start screen with a finger.

Touch [Control Panel].

Touch [Clock, Language, and Region] - [Date and Time].

●

If the problem persists, the internal clock battery may need to be

replaced. Contact Panasonic Technical Support.

●

When the computer is connected to LAN, check the date and time of

the server.

●

The 2100 A.D. or later year will not be correctly recognized on this

computer.

La pagina sta caricando ...

Panasonic UT-MA6 Manuale del proprietario

Marca: Panasonic

Modello: UT-MA6

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

UT-MB5

Scarica il pdf

rapporto

in altre lingue

English: Panasonic UT-MA6 Owner's manual

Panasonic UT-MA6 Manuale del proprietario

Questo manuale è adatto anche per

Panasonic UT-MA6 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti