LIVARNO 385778 Manuale del proprietario

Tipo
Manuale del proprietario
IAN 385778_2110 8
EDI Light GmbH
Heiligkreuz 22
6136 Pill
AUSTRIA
Last Information Update · Version des
informations · Stand van de informatie · Stan infor-
macji · Stav informací · Stav informácií · Estado de
las informaciones · Tilstand af information: · Stand
der Informationen: 02/2022 Ident.-No.:
56043022022-8
Packaging
FSC® C148090
MIX
IAN 385778_2110
LED CLAMP LAMP
OS
IT
LUCE A MORSETTO A LED
Istruzioni di installazione, funzionamento e sicurezza
GB IE
LED CLAMP LAMP
Assembly, operating and safety instructions
FR BE
LAMPE À PINCE À LED
Instructions de montage, d‘utilisation et consignes de sécurité
ES
LUZ DE PINZA LED
Instrucciones de montaje, de uso y de seguridad
NL BE
LED KLEMLICHT
Montage-, bedienings- en veiligheidsinstructies
DK
LED KLEMME LAMPE
Monterings-, betjenings- og sikkerhedshenvisninger
SVETLOBA LED SPONKE
Navodila za namestitev, uporabo in varnost
SVETLO LED NA UPINANIE
Pokyny pre montáž, obsluhu a bezpečnostné pokyny
SK
LED BILINCSFÉNY
Telepítési, üzemeltetési és biztonsági utasítások
HU
LAMPA ZACISKOWA LED
Wskazówki montażu, obsługi i bezpieczeństwa
PL
SVITIDLO S LED SVORKAMI
Pokyny k montáži, obsluze a bezpečnostní pokyny
CZ
SI
LED-KLEMMLEUCHTE
Montage-, Bedienungs- und Sicherheitshinweise
DE AT CH
GB IE
Before reading, unfold the two pages with the illustrations and then familiarise yourself with all the functions of the unit.
IT
Prima di leggere aprire le due pagine con le immagini e prendere confidenza con le diverse funzioni dell’apparecchio.
FR BE
Avant de lire le mode d‘emploi, ouvrez les deux pages contenant les illustrations et familiarisez-vous ensuite avec toutes
les fonctions de l‘appareil.
ES
Antes de leer, despliegue las dos páginas con las ilustraciones y luego familiarícese con todas las funciones del aparato.
familiarícese con todas las funciones del aparato.
NL BE
Vouw vóór het lezen de beide pagina‘s met de afbeeldingen open en maak u vertrouwd met alle functies van het
apparaat.
DK
Før du læser, vend begge sidene med billeder frem og bliv bekendt med alle apparatets funktioner.
CZ
Před čtením si odklopte obě dvě strany s obrázky a potom se seznamte se všemi funkcemi přístroje.
SI
Pred branjem odprite dve strani z ilustracijami in se nato seznanite z vsemi funkcijami naprave.
SK
Pred čítaním si odklopte obidve strany s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.
HU
Olvasás előtt hajtsa ki az ábrákat tartalmazó két oldalt, majd ismerkedjen meg a készülék összes funkciójával.
PL
Przed przeczytaniem proszę rozłożyć obie strony z ilustracjami, a następnie proszę zapoznać się z wszystkimi
funkcjami urządzenia.
DE AT CH
Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
GB/IE Assembly, operating and safety instructions Page 5
IT Istruzioni di montaggio, funzionamento e sicurezza Pagina 13
FR/BE Instructions de montage, d’utilisation et de sécurité Page 21
ES Instrucciones de montaje, funcionamiento y seguridad Página 29
NL/BE Montage-, bedienings- en veiligheidsvoorschriften Strona 37
DK Monterings-, betjenings- og sikkerhedsanvisninger Side 45
CZ Montážní, provozní a bezpečnostní pokyny Strana 53
SI Navodila za montažo, uporabo in varnost Stran 61
SK Montážne, prevádzkové a bezpečnostné pokyny Strana 71
HU Összeszerelési, üzemeltetési és biztonsági utasítások Stran 79
PL Instrukcja montażu, obsługi i bezpieczeństwa Strona 89
DE / AT / CH Montage-, Bedienungs- und Sicherheitshinweise Seite 97
56043
1
2
3
4
8
7
3
3
4
4
ON/OFF
6
5
5GB/IE
List of pictograms used* ................................................................................... Page 6
Introduction ......................................................................................................... Page 6
Intended use ........................................................................................................ Page 6
Scope of delivery ................................................................................................ Page 7
Parts Description ................................................................................................. Page 7
Technical Data .................................................................................................... Page 7
Safety ................................................................................................................... Page 7
Safety instructions ................................................................................................ Page 7
Initial use ............................................................................................................ Page 9
Checking the lamp and the delivery contents ......................................................... Page 9
Operation ........................................................................................................... Page 9
Setting up the lamp .............................................................................................. Page 9
Switching the lamp on/off ................................................................................... Page 9
Inserting / replacing the bulb ............................................................................... Page 9
Storage ................................................................................................................ Page 10
Maintenance and Cleaning .............................................................................. Page 10
Disposal ............................................................................................................... Page 10
Declaration of Conformity ................................................................................ Page 10
Warranty and service ....................................................................................... Page 11
Warranty ............................................................................................................ Page 11
Service address ................................................................................................... Page 11
Warranty card ..................................................................................................... Page 12
LED clamp lamp
Introduction
Congratulations on the purchase of your
new product. You have chosen a
highquality product. Please be sure to
carefully read all the instructions for use. Fold out
the page with the diagrams. These instructions are
part of the product and contain important
information on setup and operation. Always ob-
serve all safety instructions. Before using this prod-
uct for the first time, verify that the correct voltage
is present and that all parts are properly installed.
If you have any questions or are unsure about
operating the product, please contact your retailer
or the service centre. Please keep these instructions
in a safe place and include them when passing this
product on to others.
Intended use
This lamp is only suitable for indoor use
in dry and enclosed spaces. This product
is only intended for private household
use.
6 GB/IE
List of pictograms used*
Please read the operating instructions!
Safety notes
Instructions for use
The lamp is only intended for use as
lighting in dry, indoor locations.
VVolt
Alternating current/voltage
Hz Hertz (frequency)
WWatts (effective power)
Ra Colour rendering index of the LED
Lighting
lm Lumen
KKelvin
IP20 No protection against water!
For your safety
Observe the warnings and safety
notes!
Danger to life and risk of accidents for
infants and children!
Warning! Danger of electric shock!
Beware of hot surfaces!
Protection class II
Thread E14
This LED table lamp is not dimmable.
Product complies with the product-specific
applicable European directives.
TÜV SÜD/GS tested
20
PAP
Dispose of the packaging and product in
an environmentally-friendly manner!
* Further details, e.g. additional symbol explanations and
technical information, can be found at
www.edi-light.com
Delivery contents
Always check that all the parts are present and that
the product is in perfect condition immediately after
unpacking.
1 LED clamp light
1 Bracket with screw clamp
1 Set of operating instructions
1 LED bulb
Parts description
1 Luminaire head
2 Luminaire arm
3 Bracket
4 Screw terminal
5 Toggle switch
6 Mains plug
7 LED lamp
8 Locking screw
Technical data
Item number: 56043 (EU-Plug)
Operating voltage: 220-240 V~, 50/60 Hz
Protection class: II /
Power: E14, max. 18 W
LED light source: E14, 4,9W; 3000K;
470lm(360°); Ra=80
Dimensions: Height: ca 53 cm
Cable length: 160 cm
The LED lamps in these
luminaires can be replaced
by the end customer.
Distributor:
EDI Light GmbH
Heiligkreuz 22, 6136 Pill
AUSTRIA
www.edi-light.com
Safety
Safety instructions
Damage due to failure to comply with these
operating instructions will void the warranty! We
assume no liability for consequential damage!
We assume no liability for property damage or
personal injury due to improper handling or failure
to observe the safety instructions!
WARNING! DANGER OF ELECTRIC
SHOCK!
A faulty electrical installation or a supply
voltage which is too high may lead to an
electrical shock.
Do not open the housing; repairs must be
carried out by a professional. Contact a spe-
cialist workshop for this purpose. Unauthorised
repairs, incorrect connection or improper use
will void all warranty and liability claims.
When repairing the product, only use parts
which meet the original specifications. This
lamp contains electrical and mechanical parts
which are vital to prevent safety hazards.
Do not connect the lamp to an external dimmer.
If you notice any abnormalities during oper-
ation (e.g. unusual noises, strange smell or
smoke), switch off the product immediately and
disconnect it from the power supply by pulling
out the mains plug or switching off the circuit
breaker (0 position). Do not use the product
until it has been checked by a competent
person.
Do not operate the fixture if it has visible
damage or if the connecting cable or mains
plug is defective.
If the connecting cable of the luminaire is
damaged, it must be replaced by the manu-
facturer or its after-sales service or a similarly
qualified person in order to avoid hazards.
Do not open the housing, but leave the repair
to specialists. Contact a specialist workshop for
this purpose. Liability and warranty claims are
7GB/IE
excluded in the event of repairs carried out in-
dependently, improper connection or incorrect
operation.
Only parts that correspond to the original
device data may be used for repairs. There
are electrical and mechanical parts in this
luminaire that are essential for protection
against sources of danger.
Do not operate the fixture with an external
timer or a separate remote control system.
Do not connect the lamp to an external dimmer.
Do not immerse the lamp, the connecting cable
or the mains plug in water or other liquids.
Never touch the mains plug with wet hands.
Never pull the mains plug out of the socket by
the connecting cable, always grasp the mains
plug.
Never use the connection cable as a carrying
handle.
Keep the lamp, the mains plug and the con-
nection cable away from open flames and hot
surfaces.
Lay the connection cable so that it does not
become a tripping hazard.
Do not bend the connection cable and do not
lay it over sharp edges.
Only use the luminaire indoors. Never operate
it in damp rooms or in the rain.
Never store the luminaire in such a way that it
can fall into a bathtub or washbasin.
Never reach for an electrical appliance if it has
fallen into the water. In such a case, immediate-
ly pull the mains plug out of the socket.
When you are not using the lamp, cleaning it
or if a malfunction occurs, always switch off
the lamp and disconnect the mains plug from
the socket.
WARNING! DANGER TO
LIFE AND RISK OF ACCIDENT
FOR INFANTS AND
CHILDREN!
This product may be used by children aged 8
and over as well as by persons with physical,
sensory or mental impairments or lacking
experience and knowledge provided that they
are supervised or instructed in the safe use of
the product and that they understand the
associated risks. Do not allow children to play
with the product. Cleaning and user
maintenance must not be performed by
children without supervision.
Do not allow children to play with the lamp.
Do not allow children to play with the
packaging film. Children can get entangled in
the packaging whilst playing and suffocate.
Keep children under 8 years of age away from
the lamp.
Never leave the lamp unattended whilst it is
switched on.
NOTE: RISK OF DAMAGE!
The lamp may be damaged if used improperly.
Place the lamp on an easy to access, level,
dry, heat-resistant and sufficiently stable work
surface.
To prevent a heat build-up, do not place the
lamp directly against a wall or under wall
cabinets or similar.
Never place the lamp on or near hot surfaces
(hobs, etc.).
Never expose the lamp to high temperatures
(radiators, etc.) or the weather (rain, etc.).
Never immerse the lamp in water to clean, or
use a steam cleaner. The lamp may otherwise
be damaged.
Never put the lamp in the dishwasher. This
would break the lamp.
Discontinue use of the lamp if the plastic parts
of the lamp are cracked or deformed. Always
replace damaged parts with genuine spare
parts.
Avoid the risk of fatal injury
from electric shock
Never use the product if it is damaged in any
way.
8 GB/IE
Avoid contact of the lamp with water or other
liquids at all costs.
Never open any of the electrical equipment
or insert any objects into this equipment. Such
interferences pose a risk of fatal injury from
electric shock.
Before mounting, make sure that the existing
mains voltage matches the required operating
voltage of the mains adapter (see “Technical
data”).
Be sure not to damage any wires during
installation.
Do not install the light on damp or conductive
surfaces.
Prevent fire and injury hazards
CAUTION! RISK OF BURNS DUE
TO HOT SURFACES! To prevent burns,
ensure that the product has been switched
off and has cooled down before touching the LED
light. Illuminants become very hot.
Do not look directly into the light source. Do not
look at the light source with an optical instrument
(e.g. magnifying glass).
Replace defective lamps with new ones
immediately. Before replacing the bulb, make
sure that the luminaire is not live. To do this,
disconnect the mains plug from the socket or
switch off the circuit breaker in the fuse box (0
position).
Allow the lamp to cool for at least 15 minutes
before replacing a defective bulb.
Do not cover the lamp with objects. Fire can result
from excessive heat development.
Never use the connection cable to support the
weight of the product.
If any doubts arise during installation /
operation of the product, consult a competent
electrician.
Initial use
Checking the lamp and the
delivery contents
Be careful when opening the packaging:
1. Remove the lamp from the packaging.
2. Check that all items included in the delivery
contents are present (see diagram).
3. Remove all packaging material.
4. Check to see if the lamp or the individual parts
are visibly damaged. Do not use the lamp if
you detect any type of damage. Contact the
manufacturer using the service address stated.
Operation
Setting up the lamp
1. Attach the bracket 3 to a table top 5cm with
the screw clamp 4. (Fig. 1) The bracket 3 is not
suitable for attachment to pipes.
2. Insert the lamp arm 2 into the hole of the
holder 3. Make sure that the lamp arm 2 is
securely seated in the holder 3. Fix the lamp arm
with the locking screw 8 (Fig. 2).
3. Now insert the LED lamp 7 into the lamp head
1 by turning it clockwise. (Fig. 3)
4. Turn the lamp head 1 to the desired position.
(Fig. 4)
5. Insert the mains plug 6 into a properly installed
socket. (Fig. 5)
Switching the lamp on/off
Operate the toggle switch 5 on the lamp to
switch it on/off.
Inserting / replacing the bulb
1. Allow the fixture to cool down for at least 15
minutes before replacing a faulty bulb.
2. Unscrew the defective lamp 7 from the lamp
head 1 by turning it anticlockwise.
3.Screw the new lamp 7 into the lamp head 1
by turning it clockwise.
Storage
9GB/IE
All parts must be completely dry prior to storage.
Always store the lamp in a dry location.
Protect the lamp from direct sunlight.
Store the lamp out of reach of children, locked
aware securely and at a storage temperature
between +5 °C and +20 °C (room
temperature).
Place the lamp in the original packaging or a
box of the same size
Maintenance and cleaning
WARNING! DANGER OF ELECTRIC
SHOCK! Always disconnect the product
from the mains before cleaning.
WARNING! DANGER OF
ELECTRIC SHOCK! To ensure
electrical safety, never clean the product
with aggressive detergents or immerse it in water.
CAUTION! RISK OF BURNS DUE
TO HOT SURFACES! Allow the LED
light to cool off completely.
WARNING! RISK OF SHORT CIRCUIT!
Water or other liquids inside the housing may
cause a short circuit.
Do not allow water or other liquids to enter the
housing.
Never immerse the lamp in water or other
liquids.
NOTE: RISK OF DAMAGE!
The lamp may be damaged if used improperly.
Do not use aggressive cleaning agents, brushes
with metal or nylon bristles, or sharp or metal
cleaning objects such as metal sponges, etc.
These can damage the surfaces.
Never put the lamp in the dishwasher. This
would break the lamp.
1. Unplug the mains plug from the socket
before cleaning.
2. Allow the lamp to cool down completely.
3. Wipe the lamp clean with a damp cloth. Then
allow all parts to dry completely.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning: 1–7:
plastics / 20–22: paper and fibreboard /
80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information on
collection points and their opening hours can be
obtained from your local authority.
Declaration of conformity
This product fulfils the requirements of
the applicable European and national
directives. The relevant declarations and
documents are held by the manufacturer.
We reserve the right to make technical and visual
changes to the product in the interest of product
improvement. Typographical and printing errors
excepted.
This product contains a light source of energy
efficiency class F.
Warranty and service
10 GB/IE
11GB/IE
Warranty
We provide a 3-year warranty from the date of
purchase. Our products are manufactured using
modern production methods and are subject to
precise quality control. We guarantee that this
product is in perfect condition. During the warranty
period we will remedy any defects in material or
manufacture free of charge. In the event of an
unexpected defect, please return the carefully
packaged product to the service address specified.
The warranty does not extend to damage due to
improper opertion, or to wear parts and
consumables. These can be ordered from the
telephone number listed for a charge. Repairs not
covered by the warranty (e.g. light bulbs) may also
be requested at cost price from the service address
listed. The product will be repaired at the specified
service location. Timely processing and returns can
only be ensured by sending the product directly to
this address. If you would like additional product
information, need to order accessories or if you
have a question about the service process, please
contact our customer service department on the
telephone number specified. Please include the
item number (see “Technical data“) when enquiring
about the product.
IAN 385778_2110
Please have your receipt and item number (e.g.
IAN 123456_7890) ready as your proof of
purchase when enquiring about the product.
Service address
Great Britain & Ireland
EGLO UK LTD.
Unit 12 Cirrus Park, Lower Farm Road, Moulton
Park Industrial Estate, NORTHAMPTON NN3 6UR
T: +44 1604 790 986
12 GB/IE
Warranty card
Return address:
Name/First name:
Country/Postal code/City/Street address:
Phone number:
Item number/Description:
Purchase date/Point of purchase:
Description of the defect:
Date/Signature:
Non-warranty cases:
Please return the un-repaired item, carriage paid.
Please inform me of the costs. Repair the product for a fee.
13IT
Legenda dei pittogrammi utilizzati* .......................................................... Pagina 14
Introduzione ................................................................................................... Pagina 14
Uso previsto .................................................................................................. Pagina 14
Ambito di consegna ....................................................................................... Pagina 15
Descrizione delle parti .................................................................................... Pagina 15
Dati tecnici .................................................................................................... Pagina 15
Sicurezza ....................................................................................................... Pagina 15
Istruzioni di sicurezza ..................................................................................... Pagina 15
Commissioning ............................................................................................. Pagina 17
Controllare l’apparecchio e la fornitura ........................................................... Pagina 17
Operazione ................................................................................................... Pagina 17
Impostare l’apparecchio .................................................................................. Pagina 17
Accensione e spegnimento dell’apparecchio .................................................... Pagina 18
Sostituzione della lampadina .......................................................................... Pagina 18
Stoccaggio ...................................................................................................... Pagina 18
Manutenzione e pulizia ..............................................................................Pagina 18
Smaltimento .................................................................................................. Pagina 19
Dichiarazione di conformità ...................................................................... Pagina 19
Informazioni/garanzia ............................................................................... Pagina 19
Garanzia ...................................................................................................... Pagina 19
Indirizzo di servizio ....................................................................................... Pagina 20
Scheda di garanzia ....................................................................................... Pagina 20
Apparecchio a morsetto a LED
Introduzione
Congratulazioni per l’acquisto della tua
nuova lampada da tavolo a LED. (qui di
seguito denominato anche “prodotto” o
“apparecchio”). Avete scelto un prodotto di alta
qualità. Si prega di leggere queste istruzioni per
l’uso completamente e attentamente. Piegare la
pagina con il piegare la pagina con le
illustrazioni. Queste istruzioni per l’uso fanno
parte di questo prodotto e contengono importanti
informazioni sulla messa in funzione e sull’uso.
Osservare sempre tutte le istruzioni di sicurezza.
Prima della messa in funzione, controllare che sia
presente la tensione corretta e che tutte le parti
siano montate correttamente. In caso di domande
o dubbi sull’uso del prodotto, contattare il proprio
rivenditore o centro di assistenza. Conservare
queste istruzioni per l’uso in un luogo sicuro e
trasmetterle a terzi se necessario.
Uso previsto
Questo apparecchio è adatto solo per
funzionamento all’interno, in ambienti
asciutti e chiusi. L’elettricista che installa
il prodotto deve assicurarsi che il prodotto non sia
14 IT
Legenda dei pittogrammi utilizzati*
Leggete le istruzioni!
Istruzioni di sicurezza
Istruzioni per l’azione
Questo apparecchio è adatto solo per uso
interno in ambienti asciutti e chiusi.
VVolt
Corrente/tensione AC
Hz Hertz (frequenza)
WWatt (potenza attiva)
Ra Indice di resa cromatica del LED
Illuminazione
lm Lumen
KKelvin
IP20 Classe di protezione: nessuna protezi-
one contro l’acqua! Adatto solo per uso
interno.
Per la vostra sicurezza!
Osservare le istruzioni di avvertimento e
di sicurezza!
Pericolo di vita e incidenti per neonati e
bambini!
Attenzione!
Rischio di scossa elettrica!
Attenzione alle superfici calde!
Classe di protezione II
Filo E14
Questa lampada da tavolo a LED non è
dimmerabile.
Il prodotto è conforme alle specifiche del
prodotto europeo applicabile direttive.
Testato da TÜV SÜD/GS
20
PAP
Smaltire l’imballaggio e l’apparecchio in
modo ecologico!
* Per ulteriori dettagli, ad esempio spiegazioni aggiuntive
dei simboli o informazioni tecniche, si possono trovare su
www.edi-light.com
installato su una superficie umida o conduttiva!
Questo prodotto è destinato esclusivamente all’uso
in abitazioni private.
Ambito di consegna
Subito dopo il disimballaggio, controllate sempre
che la fornitura sia completa e che il prodotto sia in
perfetto stato.
1 luce a morsetto a LED
1 staffa con terminale a vite
1 manuale di istruzioni
1 lampadina a LED
Descrizione delle parti
1 Testa dell’apparecchio
2 Braccio dell’apparecchio
3 Staffa
4 Terminale a vite
5 Interruttore a levetta
6 Spina di rete
7 Lampada a LED
8 Vite di bloccaggio
Dati tecnici
Numero di articolo: 56043 (EU-Spina)
Tensione di
funzionamento: 220-240 V~, 50/60 Hz
Classe di protezione: II /
Versione: E14, max. 18 W
Sorgente luminosa a
LED: E14, 4,9W; 3000K;
470lm(360°); Ra=80
Dimensioni: Altezza: circa 53 cm
Lunghezza del cavo: 160
cm
La sorgente luminosa di
questo apparecchio può
essere sostituita dal cliente
finale.
Distributore:
EDI Light GmbH
Heiligkreuz 22, 6136 Pill
AUSTRIA
www.edi-light.com
Sicurezza
Istruzioni di sicurezza
Danni causati dall’inosservanza di queste norme
operative le istruzioni per l’uso invalidano la
garanzia! Non si accetta alcuna responsabilità per
i danni conseguenti! In caso di danni alla proprietà
o danni causati da un trattamento improprio o
dall’inosservanza trattamento improprio o
inosservanza del si declina ogni responsabilità per
danni alle cose o alle persone causati da un uso
improprio o dall’inosservanza delle istruzioni di
sicurezza!
ATTENZIONE! RISCHIO DI SCOSSA
ELETTRICA!
Un’installazione elettrica difettosa o una
tensione di rete eccessiva possono portare a
scosse elettriche.
Collegare la spina di rete solo se la tensione di
rete della presa corrisponde alla specifica sulla
targhetta del prodotto.
Collegare la spina di rete solo ad una presa
facilmente accessibile in modo da poter
staccare rapidamente l’apparecchio dalla rete
in caso di guasto.
Se si notano anomalie durante il
funzionamento (ad esempio rumori insoliti,
odore strano o fumo), spegnere
immediatamente il prodotto e scollegarlo
dall’alimentazione estraendo la spina di rete o
spegnendo l’interruttore automatico (posizione
0). Non utilizzare il prodotto prima che sia
stato controllato da una persona competente.
Non mettere in funzione l’apparecchio se
presenta danni visibili o se il cavo di
collegamento o la spina di rete sono difettosi.
Se il cavo di collegamento dell’apparecchio
è danneggiato, deve essere sostituito dal
15IT
produttore o dal suo servizio post-vendita o da
una persona altrettanto qualificata per evitare
pericoli.
Non aprite l’alloggiamento, ma lasciate la
riparazione agli specialisti. Contattate
un’officina specializzata per questo sco-
po. La responsabilità e i diritti di garanzia
sono esclusi in caso di riparazioni eseguite
autonomamente, di collegamento improprio o
di funzionamento errato.
Solo le parti che corrispondono ai dati orig-
inali del dispositivo possono essere utilizzate
per le riparazioni. In questo apparecchio ci
sono parti elettriche e meccaniche che sono
essenziali per la protezione contro le fonti di
pericolo.
Non far funzionare l’apparecchio con un
timer esterno o un sistema di controllo remoto
separato.
Non collegare la lampada a un dimmer
esterno.
Non immergere l’apparecchio, il cavo di
collegamento o la spina di rete in acqua o altri
liquidi.
Non toccare mai la spina di rete con le mani
bagnate.
Non estrarre mai la spina di rete dalla presa
per il cavo di collegamento, afferrare sempre
la spina di rete.
Non usare mai il cavo di collegamento come
maniglia di trasporto.
Tenere la lampada, la spina di alimentazione
e il cavo di collegamento lontano da fiamme
aperte e superfici calde.
Posare il cavo di collegamento in modo che
non diventi un pericolo di inciampo.
Non piegare il cavo di collegamento e non
posarlo su spigoli vivi.
Utilizzare l’apparecchio solo in interni. Non
usarlo mai in stanze umide o sotto la pioggia.
Non conservare mai la lampada in modo che
possa cadere in una vasca da bagno o in un
lavandino.
Non prendere mai un apparecchio elettrico se
è caduto in acqua. In tal caso, estrarre
immediatamente la spina di rete dalla presa.
Quando non utilizzate la lampada, la pulite o
se si verifica un malfunzionamento, spegnete
sempre la lampada e scollegate la spina di
alimentazione dalla presa.
ATTENZIONE! PERICOLO
DI VITA E DI INCIDENTI PER
BAMBINI E RAGAZZI!
Questo prodotto può essere utilizzato da
bambini di età pari o superiore a 8 anni e da
persone con ridotte capacità fisiche, sensoriali
o mentali o con mancanza di esperienza e
conoscenza se hanno ricevuto supervisione o
istruzioni sull’uso del prodotto in modo sicuro e
comprendono i pericoli connessi. I bambini non
devono giocare con il prodotto. La pulizia e la
manutenzione dell’utente non devono essere
eseguite dai bambini senza supervisione.
I bambini non devono giocare con
l’apparecchio.
Non lasciare che i bambini giochino con la
pellicola d’imballaggio. I bambini
possono rimanerci impigliati mentre giocano e
soffocare.
Tenere i bambini più piccoli di 8 anni lontano
dalla luce.
Non lasciare la luce incustodita durante il
funzionamento.
NOTA: RISCHIO DI DANNI!
L’uso improprio dell’apparecchio può provocare
danni all’apparecchio.
Posizionare l’apparecchio su una superficie di
lavoro facilmente accessibile, piana, asciutta,
resistente al calore e sufficientemente stabile.
Non posizionare l’apparecchio sul bordo o sul
bordo della superficie di lavoro.
Evitare l’accumulo di calore non posizionando
l’apparecchio direttamente contro una parete o
sotto armadi a muro o simili.
Non mettere mai la lampada su o vicino a
16 IT
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108

LIVARNO 385778 Manuale del proprietario

Tipo
Manuale del proprietario