Kenwood KMM-BT358 Digital Media Receiver Manuale utente

Marca: Kenwood

Modello: KMM-BT358 Digital Media Receiver

Tipo: Manuale utente

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

B5K-0871-00 [EN]

KMM-BT358

KMM-BT309

For detailed operations and information, refer to the INSTRUCTION MANUAL on the following website:

Pour les opérations et les informations détaillées, reportez-vous au MODE D’EMPLOI sur le site web suivant:

Für detaillierte Bedienungen und Informationen siehe BEDIENUNGSANLEITUNG auf der folgenden Website:

Raadpleeg de GEBRUIKSAANWIJZING op de volgende website voor gedetailleerde informatie over de

bediening:

Per le operazioni e le informazioni dettagliate, fare riferimento al ISTRUZIONI PER L’USO nel seguente sito web:

Para obtener más información y detalles sobre las operaciones, consulte el MANUAL DE INSTRUCCIONES en el

siguiente sitio web:

Para as operações e informações detalhadas, consulte o MANUAL DE INSTRUÇÕES no website abaixo:

За подробными инструкциями по управлению и информацией обращайтесь к ИHCTPУKЦИИ ПO

ЭKCПЛУATAЦИИ на следующем веб-сайте:

<https://www.kenwood.com/cs/ce/>

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ITALIANO

ESPAÑOL

PORTUGUÊS

РУCCKИЙ

DIGITAL MEDIA RECEIVER

Quick Start Guide

RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE

Guide de démarrage rapide

DIGITAL-MEDIA-RECEIVER

Schnellstartanleitung

DIGITALE MEDIAONTVANGER

Snelstartgids

RICEVITORE MULTIMEDIALE DIGITALE

Guida di avvio rapido

RECEPTOR DE MEDIOS DIGITALES

Guía de inicio rápido

RECEPTOR DE MÍDIA DIGITAL

Guia de Início Rápido

ЦИФРОВОЙ МЕДИА-РЕСИВЕР

Краткое руководство по началу работы

KMM-BT209

KMM-BT358_E_B5K-0871-00_Cover_2nd Draft.indd 1KMM-BT358_E_B5K-0871-00_Cover_2nd Draft.indd 1 2/11/2022 11:04:52 AM2/11/2022 11:04:52 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable

for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling

these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and

waste disposal will help conserve resources whilst preventing detrimental effects on our health and the

environment.

Information sur l’élimination des anciens équipements électriques et électroniques et piles

électriques (applicable dans les pays qui ont adopté des systèmes de collecte sélective)

Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne peuvent pas

être éliminés comme ordures ménagères.

Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés sur des sites

capables de traiter ces produits et leurs déchets.

Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage adapté et

l’élimination des déchets aideront à conserver les ressources et à nous préserver des leurs effets nocifs sur

notre santé et sur l’environnement.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien

(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass

dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle

für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die

Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen

über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen

Entsorgungsbetrieben.

Informatie over het weggooien van elektrische en elektronische apparatuur en batterijen

(particulieren)

Dit symbool geeft aan dat gebruikte elektrische, elektronische producten en batterijen niet bij het normale

huishoudelijke afval mogen.

Lever deze producten in bij de aangewezen inzamelingspunten, waar ze gratis worden geaccepteerd en op

de juiste manier worden verwerkt, teruggewonnen en hergebruikt.

Voor inleveradressen zie www.nvmp.nl, www.ictmilieu.nl, www.stibat.nl. Wanneer u dit product op de

juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en voorkomt u potentiële negatieve

gevolgen voor de volksgezondheid en het milieu, die anders kunnen ontstaan door een onjuiste verwerking

van afval.

Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e

delle batterie (valide per i paesi che hanno adottato sistemi di raccolta differenziata)

I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono

essere smaltiti insieme ai normali rifiuti di casa.

I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un’apposita struttura in

grado di trattare questi prodotti e di smaltirne i loro componenti.

Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l’apposito ufficio

comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla

salute e all’ambiente.

Información acerca de la eliminación de equipos eléctricos, electrónicos y baterías al final de

la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida

de residuos)

Los productos y las baterías con el símbolo de un contenedor con ruedas tachado no podrán ser desechados

como residuos domésticos.

Los equipos eléctricos, electrónicos y baterías al final de la vida útil, deberán ser reciclados en

instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales

correspondientes.

Póngase en contacto con su administración local para obtener información sobre el punto de recogida más

cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos y

evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.

KMM-BT358_E_B5K-0871-00_Cover_1st Draft.indd iKMM-BT358_E_B5K-0871-00_Cover_1st Draft.indd i 9/6/2021 3:01:10 PM9/6/2021 3:01:10 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Informação sobre a forma de deitar fora Velho Equipamento Eléctrico, Electrónico e baterias

(aplicável nos países que adotaram sistemas de recolha de lixos separados)

Produtos e baterias com o símbolo (caixote do lixo com um X) não podem ser deitados fora junto com o

lixo doméstico.

Equipamentos velhos eléctricos, electrónicos e baterias deverão ser reciclados num local capaz de o fazer

bem assim como os seus subprodutos.

Contacte as autoridades locais para se informar de um local de reciclagem próximo de si. Reciclagem e

tratamento de lixo correctos ajudam a poupar recursos e previnem efeitos prejudiciais na nossa saúde e

no ambiente.

For Israel

Declaration of Conformity with regard to the

RE Directive 2014/53/EU

Declaration of Conformity with regard to the

RoHS Directive 2011/65/EU

Manufacturer:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi,

Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN,

THE NETHERLANDS

Déclaration de conformité se rapportant à la

directive RE 2014/53/EU

Déclaration de conformité se rapportant à la

directive RoHS 2011/65/EU

Fabricant:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi,

Kanagawa, 221-0022, JAPAN

Représentants dans l’UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN,

THE NETHERLANDS

Konformitätserklärung in Bezug auf die

RE-Vorschrift 2014/53/EU

Konformitätserklärung in Bezug auf die

RoHS-Vorschrift 2011/65/EU

Hersteller:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi,

Kanagawa, 221-0022, JAPAN

EU-Vertreter:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN,

Niederlande

Conformiteitsverklaring met betrekking

tot de RE-richtlijn van de Europese Unie

(2014/53/EU)

Conformiteitsverklaring met betrekking

tot de RoHS richtlijn van de Europese Unie

(2011/65/EU)

Fabrikant:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi,

Kanagawa, 221-0022, JAPAN

EU-vertegenwoordiger:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN,

Nederland

Dichiarazione di conformità alla Direttiva RE

2014/53/EU

Dichiarazione di conformità relativa alla

direttiva RoHS 2011/65/EU

Produttore:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi,

Kanagawa, 221-0022, JAPAN

Rappresentante UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN,

THE NETHERLANDS

KMM-BT358_E_B5K-0871-00_Cover_2nd Draft_1.indd iiKMM-BT358_E_B5K-0871-00_Cover_2nd Draft_1.indd ii 3/14/2022 9:29:25 AM3/14/2022 9:29:25 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iii

English

Hereby, JVCKENWOOD declares that the radio

equipment “KMM-BT358/KMM-BT309/

KMM-BT209” is in compliance with Directive

2014/53/EU.

The full text of the EU declaration of

conformity is available at the following

internet address:

https://www.kenwood.com/euukdoc/

Français

Par la présente, JVCKENWOOD déclare que

l’équipement radio « KMM-BT358/

KMM-BT309/KMM-BT209 » est conforme à la

directive 2014/53/UE.

L’intégralité de la déclaration de conformité

UE est disponible à l’adresse Internet

https://www.kenwood.com/euukdoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das

Funkgerät “KMM-BT358/KMM-BT309/

KMM-BT209” der Richtlinie 2014/53/EU

entspricht.

Der volle Text der EU-Konformitätserklärung

steht unter der folgenden Internetadresse

zur Verfügung:

https://www.kenwood.com/euukdoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de

radioapparatuur “KMM-BT358/KMM-BT309/

KMM-BT209” in overeenstemming is met

Richtlijn 2014/53/EU.

De volledige tekst van de EU-verklaring

van overeenstemming is te vinden op het

volgende internetadres:

https://www.kenwood.com/euukdoc/

Italiano

Con la presente, JVCKENWOOD dichiara che

l΄apparecchio radio “KMM-BT358/

KMM-BT309/KMM-BT209” è conforme alla

Direttiva 2014/53/UE.

Il testo integrale della dichiarazione di

conformità UE è disponibile al seguente

indirizzo internet:

https://www.kenwood.com/euukdoc/

Español

Por la presente, JVCKENWOOD declara que el

equipo de radio “KMM-BT358/KMM-BT309/

KMM-BT209” cumple la Directiva

2014/53/EU.

El texto completo de la declaración de

conformidad con la UE está disponible en la

siguiente dirección de internet:

https://www.kenwood.com/euukdoc/

Português

Deste modo, a JVCKENWOOD declara que o

equipamento de rádio “KMM-BT358/

KMM-BT309/KMM-BT209” está em

conformidade com a Diretiva 2014/53/UE.

O texto integral da declaração de

conformidade da UE está disponível no

seguinte endereço de internet:

https://www.kenwood.com/euukdoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że

sprzęt radiowy “KMM-BT358/KMM-BT309/

KMM-BT209” jest zgodny z dyrektywą

2014/53/UE.

Pełny tekst deklaracji zgodności EU jest

dostępny pod adresem:

https://www.kenwood.com/euukdoc/

Český

Společnost JVCKENWOOD tímto

prohlašuje, že rádiové zařízení

“KMM-BT358/KMM-BT309/KMM-BT209”

splňuje podmínky směrnice 2014/53/EU.

Plný text EU prohlášení o shodě je dostupný

na následující internetové adrese:

https://www.kenwood.com/euukdoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a

„KMM-BT358/KMM-BT309/KMM-BT209“

rádióberendezés megfelel a 2014/53/EU

irányelvnek.

Az EU konformitási nyilatkozat teljes szövege

az alábbi weboldalon érhető el:

https://www.kenwood.com/euukdoc/

Svenska

Härmed försäkrar JVCKENWOOD att

radioutrustningen “KMM-BT358/

KMM-BT309/KMM-BT209” är i enlighet med

direktiv 2014/53/EU.

Den fullständiga texten av EU-försäkran

om överensstämmelse finns på följande

Internetadress:

https://www.kenwood.com/euukdoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite

“KMM-BT358/KMM-BT309/KMM-BT209” on

direktiivin 2014/53/EU mukainen.

EU-vaatimustenmukaisuusvakuutusvaatim

us löytyy kokonaisuudessaan seuraavasta

internet-osoitteesta:

https://www.kenwood.com/euukdoc/

Declaración de conformidad con respecto a la Directiva RE

2014/53/EU

Declaración de conformidad con respecto a la Directiva

RoHS 2011/65/EU

Fabricante:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa,

221-0022, JAPAN

Representante en la UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Países Bajos

Declaração de conformidade relativa à Directiva RE

2014/53/EU

Declaração de conformidade relativa à Directiva RoHS

2011/65/EU

Fabricante:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa,

221-0022, JAPAN

Representante na UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Holanda

Декларация соответствия относительно Директивы RE

2014/53/EU

Декларация соответствия относительно Директивы

RoHS 2011/65/EU

Производитель:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa,

221-0022, ЯПОНИЯ

Представительство в EC:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, НИДЕРЛАНДЫ

KMM-BT358_E_B5K-0871-00_Cover_2nd Draft.indd iiiKMM-BT358_E_B5K-0871-00_Cover_2nd Draft.indd iii 1/25/2022 5:06:08 PM1/25/2022 5:06:08 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema

» KMM-BT358/KMM-BT309/KMM-BT209 « v

skladu z Direktivo 2014/53/EU.

Celotno besedilo direktive EU o skladnosti je

dostopno na tem spletnem naslovu:

https://www.kenwood.com/euukdoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že

rádiové zariadenie „KMM-BT358/KMM-BT309/

KMM-BT209“ vyhovuje smernici 2014/53/EÚ.

Celý text EÚ vyhlásenia o zhode nájdete na

nasledovnej internetovej adrese:

https://www.kenwood.com/euukdoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret

“KMM-BT358/KMM-BT309/KMM-BT209” er i

overensstemmelse med Direktiv 2014/53/EU.

EU-overensstemmelseserklæringens fulde ordlyd

er tilgængelig på følgende internetadresse:

https://www.kenwood.com/euukdoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο

ραδιοεξοπλισμός «KMM-BT358/KMM-BT309/

KMM-BT209» συμμορφώνεται με την Οδηγία

2014/53/ΕΕ.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης

της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση

στο διαδίκτυο:

https://www.kenwood.com/euukdoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et

„KMM-BT358/KMM-BT309/KMM-BT209“

raadiovarustus on vastavuses direktiiviga

2014/53/EL.

ELi vastavusdeklaratsiooni terviktekst on

kättesaadav järgmisel internetiaadressil:

https://www.kenwood.com/euukdoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra

„KMM-BT358/KMM-BT309/KMM-BT209” atbilst

direktīvas 2014/53/ES prasībām.

Pilns ES atbilstības deklarācijas teksts ir pieejams

šādā tīmekļa adresē:

https://www.kenwood.com/euukdoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga

„KMM-BT358/KMM-BT309/KMM-BT209“ atitinka

2014/53/EB direktyvos reikalavimus.

Visą EB direktyvos atitikties deklaracijos tekstą

galite rasti šiuo internetiniu adresu:

https://www.kenwood.com/euukdoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir

tar-radju “KMM-BT358/KMM-BT309/KMM-BT209”

huwa konformi mad-Direttiva 2014/53/UE.

It-test kollu tad-dikjarazzjoni ta’ konformità huwa

disponibbli fl-indirizz intranet li ġej:

https://www.kenwood.com/euukdoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema

“KMM-BT358/KMM-BT309/KMM-BT209” u skladu

s Direktivom 2014/53/EU.

Cjeloviti tekst deklaracije Europske unije o

usklađenosti dostupan je na sljedećoj internet

adresi:

https://www.kenwood.com/euukdoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că

echipamentul radio “KMM-BT358/KMM-BT309/

KMM-BT209” este în conformitate cu Directiva

2014/53/UE.

Textul integral al declarației de conformitate UE

este disponibil la urmatoarea adresă de internet:

https://www.kenwood.com/euukdoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира,

че радиооборудването на “KMM-BT358/

KMM-BT309/KMM-BT209” е в съответствие с

Директива 2014/53/ЕС.

Пълният текст на ЕС декларацията за

съответствие е достъпен на следния интернет

адрес:

https://www.kenwood.com/euukdoc/

Turkish

Burada, JVCKENWOOD “KMM-BT358/KMM-BT309/

KMM-BT209” radyo ekipmanının 2014/53/AB

Direktifine uygun olduğunu bildirir.

AB uyumluluk deklarasyonunun tam metni

aşağıdaki internet adresinde mevcuttur.

https://www.kenwood.com/euukdoc/

Русский

JVCKENWOOD настоящим заявляет, что

радиооборудование «KMM-BT358/KMM-BT309/

KMM-BT209» соответствует Директиве

2014/53/EU.

Полный текст декларации соответствия

ЕС доступен по следующему адресу в сети

Интернет:

https://www.kenwood.com/euukdoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє,

що радіообладнання «KMM-BT358/KMM-BT309/

KMM-BT209» відповідає Директиві 2014/53/EU.

Повний текст декларації про відповідність ЄС

можна знайти в Інтернеті за такою адресою:

https://www.kenwood.com/euukdoc/

Declaration of Conformity with regard to the

Radio Equipment Regulations 2017

(S.I. 2017/1206)

Declaration of Conformity with regard to the

Restriction of the Use of Certain Hazardous

Substances in Electrical and Electronic

Equipment Regulations 2012

(S.I. 2012/3032)

Manufacturer:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi,

Kanagawa, 221-0022, JAPAN

UK Importer:

JVCKENWOOD U.K. Limited

First Floor, Gleneagles, the Belfry, Colonial Way,

Watford, Hertfordshire WD24 4WH,

UNITED KINGDOM

Hereby, JVCKENWOOD declares that the radio

equipment “KMM-BT358/KMM-BT309/

KMM-BT209” is in compliance with the relevant

statutory requirements.

The full text of the declaration of conformity is

available at the following internet address:

https://www.kenwood.com/euukdoc/

KMM-BT358_E_B5K-0871-00_Cover_2nd Draft.indd ivKMM-BT358_E_B5K-0871-00_Cover_2nd Draft.indd iv 1/25/2022 5:06:10 PM1/25/2022 5:06:10 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is

copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions

which Users shall follow in order to use the Licensed Software.

The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.

This Agreement shall be deemed completed at the time the User (hereinafter the "User") initially used the

Product in which the "Licensed Software" is embedded.

The Licensed Software may include the software which has been licensed to the Licensor directly or

indirectly from any third party. In such case, some third parties require the Users to follow their conditions

for use separately from this Software License Agreement. Such software shall not be subject to this

Agreement, and the Users are urged to read the "Important Notice concerning the Software" to be provided

separately below.

Article 1 General Provision

The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case

referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User.

(the country where the User bought the Product (hereinafter the "Country")

Article 2 License

1. The license granted under this Agreement shall be the right to use the Licensed Software in the

Product.

2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed

Software and any related documents, whether in whole or in part.

3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall

not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.

4. The User shall use the Licensed Software according to the directions described in the operation

manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright

Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also transfer the license to use the Licensed Software

embedded in the Product (including any related materials, updates and upgrades) on condition that

no original, copies or related materials continue in the possession of the User, and that the User shall

cause the transferee to comply with this Software License Agreement.

2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code

analysis works in connection with the Licensed Software.

Article 4 Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents

shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or

sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be

entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any

related documents.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User

or any third party due to the exercise of the license granted to the User under this Agreement, unless

otherwise restricted by law.

2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with

certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any

other intellectual property right that was caused by the User's use of the Licensed Software, the User shall

settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any

inconvenience it may cause.

Article 7 Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof

or any other information to be granted under this Agreement, as well as the conditions of this Agreement

as has not yet entered the public domain, and shall not disclose or divulge the same to any third party

without approval of the Licensor.

Article 8 Termination

In case the User falls under any of the events described in the following items, the Licensor may

immediately terminate this Agreement or claim that the User compensates for the damage incurred by the

Licensor due to such event:

(1) when the User violated any provision of this Agreement; or

(2) when a petition has been filed against the User for an attachment, provisional attachment,

provisional disposition or any other compulsory execution.

KMM-BT358_E_B5K-0871-00_Cover_1st Draft.indd vKMM-BT358_E_B5K-0871-00_Cover_1st Draft.indd v 9/6/2021 3:01:11 PM9/6/2021 3:01:11 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Article 9 Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed

Software, any related documents and copies thereof within two (2) weeks from such date of termination.

Article 10 Protection of Copyright

1. The copyright and all the other intellectual property rights relating to the Licensed Software

shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the

ownership of the User.

2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the

Article 11 Export Restriction

1. It is prohibited to export the Licensed Software and any related documents outside the country

of the User (including transmission thereof outside the country of the User via Internet of other

communication tools).

2. The User shall understand that the Licensed Software shall be subject to the export restrictions

adopted by the country of User and any other countries.

3. The User shall agree that the software will be subject to any and all applicable international and

domestic laws (including the export control regulation of the country of User and any other countries,

and any restrictions concerning the end-users, the use by end-users and importing countries to be

provided by the country of User and any other countries, and any other governmental authorities).

Article 12 Miscellaneous

1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions

shall continue in force.

2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of

this Agreement shall be provided or settled upon good-faith consultation between the Licensor and

the User.

3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and

any dispute arising from, and relating to the rights and obligations under, this Agreement shall be

submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

Important Notice concerning the Software

-jansson

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

-cJSON

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

KMM-BT358_E_B5K-0871-00_Cover_1st Draft.indd viKMM-BT358_E_B5K-0871-00_Cover_1st Draft.indd vi 9/6/2021 3:01:11 PM9/6/2021 3:01:11 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

vii

-CMP

The MIT License (MIT)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

nanopb

This software is provided 'as-is', without any express or implied warranty. In no event will the authors be

held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications,

and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote

the original software. If you use this software in a product, an acknowledgment in the product

documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the

original software.

3. This notice may not be removed or altered from any source distribution.

sha2

AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/

You may obtain a copy of the license at

https://opensource.org/licenses/BSD-3-Clause

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Posix

Redistribution and use in source and binary forms, with or without modification, are permitted provided

that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the

following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and

the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following

acknowledgement:

This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or

promote products derived from this software without specific prior written permission.

Developed at SunPro, a Sun Microsystems, Inc. business.

Permission to use, copy, modify, and distribute this software is freely granted, provided that this notice is

preserved.

License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc.

MD4 Message-Digest Algorithm” in all material mentioning or referencing this software or this function.

KMM-BT358_E_B5K-0871-00_Cover_1st Draft.indd viiKMM-BT358_E_B5K-0871-00_Cover_1st Draft.indd vii 9/6/2021 3:01:11 PM9/6/2021 3:01:11 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

viii

T-Kernel 2.0

This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum

(www.tron.org)

BSD-3-Clause

You may obtain a copy of the license at

https://opensource.org/licenses/BSD-3-Clause

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

LFS Subsystem

You may obtain a copy of the license at

https://directory.fsf.org/wiki/License:BSD-4-Clause

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Accordo2 Player

Apache License

Licensed under the Apache License,

Version 2.0, January 2004(the "License");

You may obtain a copy of the license at

http://www.apache.org/licenses/LICENSE-2.0

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Author: Chris G. Demetriou

Permission to use, copy, modify and distribute this software and its documentation is hereby granted,

provided that both the copyright notice and this permission notice appear in all copies of the software,

derivative works or modified versions, and any portions thereof, and that both notices appear in supporting

documentation.

CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION. CARNEGIE MELLON

DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF

THIS SOFTWARE.

Carnegie Mellon requests users of this software to return to

Software Distribution Coordinator or [email protected]

School of Computer Science

Carnegie Mellon University

Pittsburgh PA 15213-3890

any improvements or extensions that they make and grant Carnegie the rights to redistribute these

changes.

License is also granted to make and use derivative works provided that such works are identified as

"derived from the RSA Data Security, Inc. MD4 Message-Digest Algorithm" in all material mentioning or

referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or

the suitability of this software for any particular purpose. It is provided "as is" without express or implied

warranty of any kind.

You may redistribute unmodified or modified versions of this source code provided that the above

This software is provided ``as is'', and comes with no warranties of any kind. I shall in no event be liable for

anything that happens to anyone/anything when using this software.

These notices must be retained in any copies of any part of this documentation and/or software.

KMM-BT358_E_B5K-0871-00_Cover_1st Draft.indd viiiKMM-BT358_E_B5K-0871-00_Cover_1st Draft.indd viii 9/6/2021 3:01:11 PM9/6/2021 3:01:11 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Basic procedure

1 Remove the key from the ignition switch, then disconnect the

terminal of the car battery.

2 Connect the wires properly. See “Wiring connection” on page 3.

3 Install the unit to your car. See the following “Installing the unit

(in-dash mounting)”.

4 Connect the terminal of the car battery.

5 Press B SRC to turn on the power.

6 Detach the faceplate and reset the unit within 5 seconds. See “How to

reset” on page 4.

Installing the unit (in-dash mounting)

Dashboard of

your car

Hook on the

top side

Bend the appropriate tabs to hold the

sleeve firmly in place.

Installation/Connection

This section is for the professional installer.

For safety’s sake, leave wiring and mounting to professionals. Consult the

car audio dealer.

WARNING

• The unit can only be used with a 12V DC power supply, negative ground.

• Disconnect the battery’s negative terminal before wiring and mounting.

• Do not connect Battery wire (yellow) and Ignition wire (red) to the car

chassis or Ground wire (black) to prevent a short circuit.

• To prevent short circuit:

– Insulate unconnected wires with vinyl tape.

– Be sure to ground this unit to the car’s chassis again after installation.

– Secure the wires with cable clamps and wrap vinyl tape around the

wires that comes into contact with metal parts to protect the wires.

CAUTION

• Install this unit in the console of your vehicle. Do not touch the metal parts

of this unit during and shortly after use of the unit. Metal parts such as the

heat sink and enclosure become hot.

• Do not connect the wires of speakers to the car chassis or Ground wire

(black), or connect them in parallel.

• Mount the unit at an angle of less than 30°.

• If your vehicle wiring harness does not have the ignition terminal, connect

Ignition wire (red) to the terminal on the vehicle’s fuse box which provides

12 V DC power supply and is turned on and off by the ignition key.

• Keep all cables away from heat dissipate metal parts.

• After the unit is installed, check whether the brake lamps, blinkers, wipers,

etc. on the car are working properly.

• If the fuse blows, first make sure the wires are not touching car’s chassis,

then replace the old fuse with one that has the same rating.

KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 2KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 2 9/7/2021 9:31:00 AM9/7/2021 9:31:00 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

REMOTE CONT

STEERING WHEEL

REMOTE INPUT

P. CONT

ANT CONT

MUTE

Antenna terminal

Fuse (10 A)

Wiring connection

Removing the unit Part list (supplied)

(A) Faceplate (×1)

(B) Trim plate (×1)

(D) Wiring harness (×1)

(E) Extraction key (×2)

If no connections are made, do

not let the wire come out from

the tab.

ISO connectors

a Light blue/yellow: To the steering wheel remote control adapter

b Blue/white: To the power control terminal when using the optional power

amplifier or to the antenna control terminal in the vehicle

c Brown: Connect to the device equipped with muting feature to mute this unit

d Yellow: Battery wire

e Red: Ignition wire

f Red: A7 from ISO connector

g Yellow: A4 from ISO connector

Pin Color and function (for ISO connectors)

A4 Yellow : Battery

A5 Blue/White*1 : Power control

A7 Red : Ignition (ACC)

A8 Black : Earth (ground) connection

B1, B2 Purple ], Purple/black [: Rear speaker (right)

B3, B4 Gray ], Gray/black [: Front speaker (right)

B5, B6 White ], White/black [: Front speaker (left)

B7, B8 Green ], Green/black [: Rear speaker (left)

NOTE: Total output for Blue/White wire

(*1) + (*2) is 12 V 350 mA

KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 3KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 3 9/7/2021 9:31:06 AM9/7/2021 9:31:06 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Basics

Faceplate Volume knob USB input terminal

Detach button Display window* Auxiliary input jack

* Only for illustration purpose.

Attach Detach How to reset

Reset the unit

within 5seconds

after detaching the

faceplate.

To On the faceplate

Turn on the power Press B SRC.

• Press and hold to turn off the power.

Adjust the volume Turn the volume knob.

Select a source Press B SRC repeatedly.

Change the display information Press DISP repeatedly.

Before Use

IMPORTANT

• To ensure proper use, please read through this Guide before using this

product. It is especially important that you read and observe Warnings and

Cautions in this Guide.

• Please keep the Guide in a safe and accessible place for future reference.

WARNING

Do not operate any function that takes your attention away from safe

driving.

CAUTION

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent

accidents.

• Lower the volume before playing digital sources to avoid damaging the

speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no

responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside

the unit to prevent a short circuit.

• USB rating is indicated on the main unit. To view, detach the faceplate.

• Depending on the types of cars, the antenna will automatically extend

when you turn on the unit with the antenna control wire connected.

Turn off the unit or change the source to STANDBY when parking at a low

ceiling area.

KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 4KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 4 9/7/2021 9:31:06 AM9/7/2021 9:31:06 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Getting Started

1 Select the display language, acknowledge the

crossover type and cancel the demonstration

When you turn on the power for the first time (or

[FACTORY RESET]

is set to

[YES]

), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”

1 Turn the volume knob to select

[EN]

(English) /

[RU]

(Russian) /

[SP]

(Spanish) /

[FR]

(French) /

[GE]

* (German), then press the knob.

[EN]

is selected for the initial setup.

Then, the display shows: “2-WAY X ’ OVER” or “3-WAY X ’ OVER” “PRESS”

“VOLUME KNOB” “TO CONFIRM”.

2 Press the volume knob to acknowledge the current crossover type.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.

3 Press the volume knob again.

[YES]

is selected for the initial setup.

4 Press the volume knob again.

“DEMO OFF” appears.

2 Set the clock and date

1 Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select

[CLOCK]

, then press the knob.

To adjust the clock

3 Turn the volume knob to select

[CLOCK ADJUST]

, then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Set the time in the order of “Hour” “Minute”.

5 Turn the volume knob to select

[CLOCK FORMAT]

, then press the knob.

6 Turn the volume knob to select

[12H]

[24H]

, then press the knob.

To set the date

7 Turn the volume knob to select

[DATE FORMAT]

, then press the knob.

8 Turn the volume knob to select

[DD/MM/YY]

[MM/DD/YY]

, then press

the knob.

9 Turn the volume knob to select

[DATE SET]

, then press the knob.

10 Turn the volume knob to make the settings, then press the knob.

Set the date in the order of “Day” “Month” “Year” or “Month” “Day”

“Year”.

11 Press and hold to exit.

To return to the previous setting item, press .

3 Set the other optional settings

You can only set the following items while the unit is in STANDBY source.

1 Press B SRC repeatedly to enter STANDBY.

2 Press the volume knob to enter

[FUNCTION]

3 Turn the volume knob to select an item (see the following table), then

press the knob.

4 Repeat step 3 until the desired item is selected or activated.

5 Press and hold to exit.

To return to the previous setting item, press .

Default: [XX]

[SYSTEM]

[KEY BEEP] [ON]: Activates the keypress tone. ; [OFF]: Deactivates.

[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;

[NO]: Cancels.

[ENGLISH]

Select the display language for [FUNCTION] menu and music

information if applicable.

By default, [ENGLISH] is selected.

[РУССКИЙ]

[ESPANOL]

[FRANCAIS]

[DEUTSCH]*

* Only for / .

KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 5KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 5 9/7/2021 9:31:06 AM9/7/2021 9:31:06 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Radio

Search for a station

1 Press B SRC repeatedly to select RADIO.

2 Press BAND repeatedly to select FM1/FM2/FM3/MW/LW.

3 Press S / T to search for a station.

Settings in memory

You can store up to 18 stations for FM and 6 stations for MW/LW.

Store a station

While listening to a station....

Press and hold one of the number buttons (1 to 6).

Select a stored station

Press one of the number buttons (1to6).

USB/iPod

Selectable source:

/ : USB/iPod USB or iPod BT

: USB

Start playback

The source changes automatically and playback starts when you attach a

device (USB device/ iPod/iPhone) to the USB input terminal.

To On the faceplate

Play back/pause Press 6IW.

Reverse/Fast-forward Press and hold .

Select a file Press .

Select a folder Press 2 / 1 .

Repeat play Press 4 repeatedly.

Random play Press 3 repeatedly.

Functions Settings

1 Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item, then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press .

• Refer to the INSTRUCTION MANUAL on the following website for the

detailed explanation of each item: <https://www.kenwood.com/cs/ce/>

[FUNCTION] menu items

[AUDIO CONTROL]

: Sets your preferred audio settings.

[DISPLAY]

: Sets your preferred control for the display window.

[TUNER SETTING]

: Settings for radio source.

[USB]

: Settings for using a USB device.

[BT MODE]

: Settings for using a Bluetooth device.

[REMOTE APP]

: Settings for using smartphone to control this unit.

[MIC GAIN]

*1 : Sets the sensitivity of the microphone.

[NR LEVEL]

*1 : Adjusts the noise reduction level.

[ECHO CANCEL]

*1 : Adjusts the echo cancellation delay time.

[SYSTEM]

: Settings for this unit.

[CLOCK]

: Adjusts the clock.

[ENGLISH]

: Selects language for the menu and music information.

[РУССКИЙ]

: Selects language for the menu and music information.

[ESPANOL]

: Selects language for the menu and music information.

[FRANCAIS]

: Selects language for the menu and music information.

[DEUTSCH]

*2 : Selects language for the menu and music information.

[DEMO MODE]

: Activates or deactivates the display demonstration.

*1 Applicable only while talking on the phone.

*2 Only for / .

Other Information

For playback operations of AUX sources, refer to the INSTRUCTION MANUAL

on the following website: <https://www.kenwood.com/cs/ce/>

KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 6KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 6 9/7/2021 9:31:06 AM9/7/2021 9:31:06 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Note for specifications

Bluetooth Frequency Range:

2.402 GHz — 2.480 GHz

Bluetooth RF Output Power (E.I.R.P.):

+4 dBm (MAX), Power Class 2

Speaker Impedance:

4Ω—8Ω

Operating Voltage:

12 V DC car battery

Bluetooth®

• Depending on the Bluetooth version, operating system and the

firmware version of your mobile phone, Bluetooth features may not

work with this unit.

• Be sure to turn on the Bluetooth function of the device to make the

following operations.

• Signal conditions vary depending on the surroundings.

Connect the microphone

Connect the supplied microphone to the microphone input jack on the rear

panel.

Adjust the

microphone

angle

Secure using cord

clamps (not supplied)

if necessary.

Pair and connect a Bluetooth device for the first time

1 Press B SRC to turn on the unit.

2 Search and select the name of your receiver (“KMM-BT358”/

“KMM-BT309”/“KMM-BT209”) on the Bluetooth device.

“PAIRING”

“PASS XXXXXX” “Device name” “PRESS” “VOLUME

KNOB” appears on the display.

• For some Bluetooth devices, you may need to enter the Personal

Identification Number (PIN) code immediately after searching.

3 Press the volume knob to start pairing.

“PAIRING OK” appears when pairing is completed.

Once pairing is completed, Bluetooth connection is established

automatically.

• / : “BT1 CONNECTED” and/or “BT2 CONNECTED”

appears on the display window for 2 seconds.

“ ” indicator lights up to show the strength of the battery and signal of

the connected device.

• : “BT1” and/or “BT2” indicator on the display window lights up.

Answer a call

Press or the volume knob or one of the number buttons (1 to 6).

• To adjust the phone volume

[00]

[35]

, turn the volume knob.

• To end a call, press .

Audio player via Bluetooth

1 Press B SRC repeatedly to select BTAUDIO.

• Pressing enters BT AUDIO directly.

2 Operate the audio player via Bluetooth to start playback.

To On the faceplate

Play back/pause Press 6 IW.

Select group or folder Press 2 / 1 .

Reverse skip/Forward skip Press .

Reverse/Fast-forward Press and hold .

Repeat play Press 4 repeatedly.

Random play Press and hold 3 to select

[ALL RANDOM]

[GROUP RANDOM]

KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 7KMM-BT358_E_B5K-0871-00_EN_1st Draft.indd 7 9/7/2021 9:31:07 AM9/7/2021 9:31:07 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Procédure de base

1 Retirez la clé de contact, puis déconnectez la borne de la batterie de la

voiture.

2 Connectez les fils correctement. Voir “Connexions” à la page3.

3 Installez l’appareil dans votre voiture. Reportez-vous à “Installation de

l’appareil (montage encastré)” ci-après.

4 Connectez la borne de la batterie de la voiture.

5 Appuyez sur B SRC pour mettre l’appareil sous tension.

6 Détachez la façade et réinitialisez l’appareil avant 5 secondes. Voir

“Comment réinitialiser” à la page4.

Installation de l’appareil (montage encastré)

Tableau de bord

de votre voiture

Crochet sur le côté

supérieur

Tordez les languettes appropriées pour

maintenir le manchon en place.

Installation/Connexion

Cette section est réservée aux installateurs professionnels.

Pour des raison de sécurité, laissez le travail de câblage et de montage des

professionnels. Consultez votre revendeur autoradio.

MISE EN GARDE

• L’appareil peut uniquement être utilisé avec une alimentation de 12 V CC, à

masse négative.

• Déconnectez la borne négative de la batterie avant le câblage et le montage.

• Ne connectez pas le fil de batterie (jaune) et le fil d’allumage (rouge) au châssis

de la voiture ou au fil de masse (noir) pour éviter les courts-circuits.

• Pour éviter les courts-circuits:

– Isolez les fils non connectés avec du ruban adhésif.

– Assurez-vous de raccorder de nouveau la mise à la masse de cet appareil au

châssis de la voiture après l’installation.

– Fixez les câbles avec des serre-câbles et enrouler un ruban de vinyle autour

des câbles qui entrent en contact avec des pièces métalliques pour protéger

les câbles.

AVERTISSEMENT

• Installez cet appareil dans la console de votre véhicule. Ne touchez pas les

parties métalliques de cet appareil pendant ou juste après son utilisation. Les

parties métalliques, comme le dissipateur de chaleur et le boîtier, deviennent

chaudes.

• Ne connectez pas les fils des l’enceintes au châssis de la voiture, au fil de

masse (noir) ou en parallèle.

• Montez l’appareil avec un angle de moins de 30°.

• Si le faisceau de fils de votre véhicule ne possède pas de borne d’allumage,

connectez le fil d’allumage (rouge) à la borne du boîtier de fusible de votre

véhicule qui offre une alimentation de 12 V CC et qui se met en et hors service

avec la clé de contact.

• Gardez tous les câbles à l’écart des dissipateurs thermiques.

• Après avoir installé l’appareil, vérifiez si les lampes de frein, les indicateurs, les

clignotants, les essuie-glaces, etc. de la voiture fonctionnent correctement.

• Si un fusible saute, assurez-vous d’abord que les câbles ne touches pas le châssis

de la voiture puis remplacez le vieux fusible par un nouveau de même valeur.

KMM-BT358_E_B5K-0871-00_FR.indd 2KMM-BT358_E_B5K-0871-00_FR.indd 2 2022/03/26 13:04:252022/03/26 13:04:25

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

REMOTE CONT

STEERING WHEEL

REMOTE INPUT

P. CONT

ANT CONT

MUTE

Borne de l’antenne

Fusible (10 A)

Connexions

Retrait de l’appareil Liste de pièces (fourni)

(A) Façade (×1)

(B) Plaque de garniture (×1)

(D) Faisceau de fils (×1)

(E) Clé d’extraction (×2)

Si aucune connexion n’est faite,

ne laissez pas le câble sortir de la

languette.

Connecteurs ISO

a Bleu clair/jaune: À l’adaptateur de télécommande volant

b Bleu/blanc: À la borne de commande d’alimentation lorsque vous utilisez

l’amplificateur de puissance en option, soit à la borne de commande d’antenne du

véhicule

c Marron: Connectez à l’appareil équipé d’une fonction de mise en sourdine pour

mettre cet appareil en sourdine

d Jaune: Câble de batterie

e Rouge: Câble d’allumage

f Rouge: A7 à partir du connecteur ISO

g Jaune: A4 à partir du connecteur ISO

Broche Couleur et fonction (pour les connecteurs ISO)

A4 Jaune : Pile

A5 Bleu/Blanc*1 : Commande d’alimentation

A7 Rouge : Allumage (ACC)

A8 Noir : Connexion à la terre (masse)

B1, B2 Violet ], Violet/noir [: Enceinte arrière (droite)

B3, B4 Gris ], Gris/noir [: Enceinte avant (droite)

B5, B6 Blanc ], Blanc/noir [: Enceinte avant (gauche)

B7, B8 Vert ], Vert/noir [: Enceinte arrière (gauche)

REMARQUE: La sortie totale pour le fil bleu/blanc

(*1) + (*2) est de 12 V 350 mA

KMM-BT358_E_B5K-0871-00_FR.indd 3KMM-BT358_E_B5K-0871-00_FR.indd 3 2022/03/26 13:04:262022/03/26 13:04:26

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Fonctionnement de base

Façade Bouton de volume Prise d’entrée USB

Touche de détachement Fenêtre d’affichage* Prise d’entrée auxiliaire

* Uniquement à des fins d’illustration.

Attachez Détachez Comment réinitialiser

Réinitialisez l’appareil

en moins de 5

secondes après avoir

détaché la façade.

Pour Sur la façade

Mettez l’appareil sous tension Appuyez sur B SRC.

• Maintenez la touche enfoncée pour

mettre l’appareil hors tension.

Ajustez le volume Tournez le bouton de volume.

Sélectionner la source Appuyez répétitivement sur B SRC.

Changez l’information sur l’affichage Appuyez répétitivement sur DISP.

Avant l’utilisation

IMPORTANTES

• Pour utiliser correctement l’appareil, veuillez lire ce Guide complément avant

de l’utiliser. Il est particulièrement important que vous lisiez et acceptiez les

avertissements et les précautions de ce Guide.

• Veuillez garder ce Guide dans un endroit sûr et accessible pour une utilisation

future.

MISE EN GARDE

N’utilisez aucune fonction qui risque de vous distraire de la conduite sure de votre

véhicule.

AVERTISSEMENT

Réglage du volume:

• Ajustez le volume de façon à pouvoir entendre les sons extérieurs à la voiture

afin d’éviter tout risque d’accident.

• Réduisez le volume avant de reproduire des sources numériques afin d’éviter

d’endommager les enceintes par la soudaine augmentation du niveau de sortie.

Généralités:

• Éviter d’utiliser le périphérique extérieur s’il peut gêner une conduite en toute

sécurité.

• Assurez-vous que toutes les données importantes ont été sauvegardées.

Nous ne pouvons pas être tenu responsable pour toute perte des données

enregistrées.

• Veuillez faire en sorte de ne jamais mettre ou laisser d’objets métalliques (tels

que des pièces ou des outils) dans l’appareil, afin d’éviter tout risque de court-

circuit.

• La classe USB est indiquée sur l’appareil principal. Pour le voir, détachez la

façade.

• En fonction du type de voiture, l’antenne s’étendra automatiquement quand

vous mettrez l’appareil sous tension si le câble de commande d’antenne est

connecté. Mettez l’appareil hors tension ou changez la source sur STANDBY

quand vous vous garez dans un parking avec un plafond bas.

KMM-BT358_E_B5K-0871-00_FR.indd 4KMM-BT358_E_B5K-0871-00_FR.indd 4 2022/03/26 13:04:262022/03/26 13:04:26

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Prise en main

1 Sélectionnez la langue d’affichage, vérifiez le type de

transition et annulez la démonstration

Quand vous mettez l’appareil sous tension pour la première fois (ou que

[FACTORY

RESET]

est réglé sur

[YES]

), l’affichage montre: “SEL LANGUAGE” “PRESS”

“VOLUME KNOB”

Tournez le bouton de volume pour sélectionner

[EN]

(anglais) /

[RU]

(russe) /

[SP]

(espagnol) /

[FR]

(français) /

[GE]

* (allemand), puis appuyez sur le bouton.

[EN]

est choisi pour le réglage initial.

Puis, l’affichage montre: “2-WAY X’OVER” ou “3-WAY X’OVER” “PRESS”

“VOLUME KNOB” “TO CONFIRM”.

2 Appuyez sur le bouton de volume pour valider le type de transition actuel.

Puis, l’affichage montre: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.

3 Appuyez de nouveau sur le bouton de volume.

[YES]

est choisi pour le réglage initial.

4 Appuyez de nouveau sur le bouton de volume.

“DEMO OFF” apparaît.

2 Réglez l’horloge et la date

1 Appuyez sur le bouton de volume pour entrer

[FUNCTION]

Tournez le bouton de volume pour choisir [

CLOCK

], puis appuyez sur le bouton.

Pour ajuster l’horloge

3 Tournez le bouton de volume pour choisir

[CLOCKADJUST]

, puis appuyez sur

le bouton.

4 Tournez le bouton de volume pour faire les réglages, puis appuyez sur le

bouton.

Réglez l’heure dans l’ordre “Heures” “Minutes”.

5 Tournez le bouton de volume pour choisir

[CLOCK FORMAT]

, puis appuyez

sur le bouton.

6 Tournez le bouton de volume pour choisir

[12H]

[24H]

, puis appuyez sur

le bouton.

Pour régler la date

7 Tournez le bouton de volume pour choisir

[DATEFORMAT]

, puis appuyez sur

le bouton.

8 Tournez le bouton de volume pour choisir

[DD/MM/YY]

[MM/DD/YY]

, puis

appuyez sur le bouton.

9 Tournez le bouton de volume pour choisir

[DATESET]

, puis appuyez sur le

bouton.

10 Tournez le bouton de volume pour faire les réglages, puis appuyez sur le

bouton.

Réglez la date dans l’ordre “Jour” “Mois” “Année” ou “Mois” “Jour”

“Année”.

11 Maintenez enfoncée pour quitter.

Pour retourner à l’option de réglage précédente, appuyez sur .

3 Réglage des autres réglages optionnels

Vous pouvez régler uniquement les éléments suivants quand l’appareil est sur la

source STANDBY.

1 Appuyez répétitivement sur B SRC pour entrer en veille STANDBY.

2 Appuyez sur le bouton de volume pour entrer

[FUNCTION]

3 Tournez le bouton de volume pour sélectionner un élément (voir le

tableau suivant), puis appuyez sur le bouton.

Répétez l’étape 3 jusqu’à ce que l’élément souhaité soit sélectionné ou activé.

5 Maintenez enfoncée pour quitter.

Pour retourner à l’option de réglage précédente, appuyez sur .

Défaut: [XX]

[SYSTEM]

[KEY BEEP] [ON]: Met en service la tonalité des touches. ; [OFF]: Met hors service la

fonction.

[FACTORY RESET] [YES]: Réinitialise les réglages aux valeurs par défaut (sauf la station

mémorisée). ; [NO]: Annulation.

[ENGLISH]

Sélectionnez la langue d’affichage pour le menu [FUNCTION] et

l’information sur le morceau si elle est disponible.

Par défaut, [ENGLISH] est sélectionné.

[РУССКИЙ]

[ESPANOL]

[FRANCAIS]

[DEUTSCH]*

* Uniquement pour / .

KMM-BT358_E_B5K-0871-00_FR.indd 5KMM-BT358_E_B5K-0871-00_FR.indd 5 2022/03/26 13:04:262022/03/26 13:04:26

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Radio

Recherchez une station

1 Appuyez répétitivement sur B SRC pour sélectionner RADIO.

2 Appuyez répétitivement sur BAND pour sélectionner FM1/FM2/FM3/MW/

LW.

3 Appuyez sur S / T pour recherche une station.

Réglages en mémoire

Vous pouvez mémoriser un maximum de 18 stations pour FM et de 6 stations

pour MW/LW.

Mémorisez une station

Pendant l’écoute d’une station....

Maintenez enfoncée une des touches numériques (1 à 6).

Sélectionnez une station mémorisée

Appuyez sur l’une des touches numériques (1 à 6).

USB/iPod

Source sélectionnable:

/ : USB/iPod USB ou iPod BT

: USB

Démarrez la lecture

La source change automatiquement et la lecture démarre quand vous connectez

un périphérique (périphérique USB/ iPod/iPhone) à la prise d’entrée USB.

Pour Sur la façade

Lecture/pause Appuyez sur 6 IW.

Recherche rapide vers

l’arrière/vers l’avant Maintenez enfoncée .

Sélectionnez un fichier Appuyez sur .

Sélectionnez un dossier Appuyez sur 2 / 1 .

Lecture répétée Appuyez répétitivement sur 4 .

Lecture aléatoire Appuyez répétitivement sur 3 .

Réglages des fonctions

1 Appuyez sur le bouton de volume pour entrer

[FUNCTION]

2 Tournez le bouton de volume pour choisir un élément, puis appuyez sur le

bouton.

Répétez l’étape 2 jusqu’à ce que l’élément souhaité soit sélectionné ou activé.

4 Maintenez enfoncée pour quitter.

Pour retourner à l’option de réglage précédente, appuyez sur .

• Reportez-vous au MODE D’EMPLOI sur les sites web suivant pour une

explication détaillée de chaque élément: <https://www.kenwood.com/cs/ce/>

Articles du menu [FUNCTION]

[AUDIO CONTROL]

: Règle vos réglages audio préférés.

[DISPLAY]

: Règle votre commande préférée pour la fenêtre d’affichage.

[TUNER SETTING]

: Réglages pour la source radio.

[USB]

: Réglages pour l’utilisation d’un périphérique USB.

[BT MODE]

: Réglages pour l’utilisation d’un périphérique Bluetooth.

[REMOTE APP]

: Réglages pour l’utilisation d’un smartphone pour commander

cet appareil.

[MIC GAIN]

*1 : Règle la sensibilité d’un microphone.

[NR LEVEL]

*1 : Ajuste du niveau de réduction de bruit.

[ECHO CANCEL]

*1 : Ajuste le temps de retard d’annulation de l’écho.

[SYSTEM]

: Réglages pour cet appareil.

[CLOCK]

: Règle l’horloge.

[ENGLISH]

: Sélectionne la langue pour le menu et les informations sur le

morceau.

[РУССКИЙ]

: Sélectionne la langue pour le menu et les informations sur le

morceau.

[ESPANOL]

: Sélectionne la langue pour le menu et les informations sur le

morceau.

[FRANCAIS]

: Sélectionne la langue pour le menu et les informations sur le

morceau.

[DEUTSCH]

*2 : Sélectionne la langue pour le menu et les informations sur le

morceau.

[DEMO MODE]

: Met en ou hors service la démonstration des affichages.

*1 Utilisable uniquement pendant que vous parlez au téléphone.

*2 Uniquement pour / .

Autres informations

Pour les opérations de lecture des sources AUX, reportez-vous au MODE

D’EMPLOI sur le site web suivant: <https://www.kenwood.com/cs/ce/>

KMM-BT358_E_B5K-0871-00_FR.indd 6KMM-BT358_E_B5K-0871-00_FR.indd 6 2022/03/26 13:04:272022/03/26 13:04:27

La pagina sta caricando ...

Kenwood KMM-BT358 Digital Media Receiver Manuale utente

Marca: Kenwood

Modello: KMM-BT358 Digital Media Receiver

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Kenwood KMM-BT358 Digital Media Receiver User manual
français: Kenwood KMM-BT358 Digital Media Receiver Manuel utilisateur
español: Kenwood KMM-BT358 Digital Media Receiver Manual de usuario
Nederlands: Kenwood KMM-BT358 Digital Media Receiver Handleiding
português: Kenwood KMM-BT358 Digital Media Receiver Manual do usuário

Kenwood KMM-BT358 Digital Media Receiver Manuale utente

Kenwood KMM-BT358 Digital Media Receiver Manuale utente

in altre lingue

Documenti correlati

Altri documenti