NutriBullet ZNBF30400Z Guida utente

User guide

®

BLENDER

GENERAL SAFETY

INFORMATION

• This appliance shall not

be used by children.

Keep the appliance

and its cord out of

reach of children.

Children shall not play

with the appliance.

• Do not use outdoors.

 NEVER LEAVE

THE nutribullet®

UNATTENDED

WHILE IT IS IN USE

 ALWAYS TURN THE

nutribullet® OFF

WHEN NOT IN USE

• Always disconnect the

appliance from the

power supply if it is

left unattended and

Important safeguards

Warning! To avoid the risk of serious injury, carefully

read all instructions before operating your nutribullet®.

When using any electrical appliance, basic safety

precautions should always be observed, including

the following important information.

Save these instructions!

FOR HOUSEHOLD USE ONLY

!

before assembling,

disassembling or

cleaning.

• Switch o the appliance

and disconnect

from supply before

changing accessories or

approaching parts that

move in use.

• Appliances can be used

by persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision

or instruction concerning

use of the appliance in

a safe way and if they

understand the hazards

involved.

• Do not use this appliance

for anything but its

3

intended use. Misuse

may result in personal

injury.

HEAT & PRESSURE SAFETY

• Always use extreme

care and attention when

using hot ingredients in

any blending product,

as the friction from the

rotating blades (during

the blending process)

combined with the

thermal energy of the

heated ingredients can

create a dangerous

situation if not properly

controlled.

• Be careful if hot liquid is

poured into the blender

as it can be ejected out

of the appliance due to

sudden steaming.

Use extra caution when

blending hot liquids in

the pitcher.

Never turn the power on

while using the pitcher

without the vented lid

cap inserted and locked

into the pitcher lid, as

ingredients can splash

and if hot or warm, could

potentially cause thermal

injury or property damage.

Steam and splattering

ingredients can escape

through the pitcher lid,

potentially scalding and/

or burning the user.

NEVER blend hot liquids

in your pitcher without

the pitcher lid and

vented lid cap attached

and locked. The vented

lid cap allows steam and

pressure to escape, while

guarding against excess

splashing.

When blending hot

liquids, add liquid

and solid ingredients

to your pitcher below

their respective MAX

lines. Attach the pitcher

lid with the vented

lid cap inserted and

locked. Press POWER

and begin blending

on the LOW setting.

Once ingredients are

integrated adjust

speed as needed. If the

nutribullet® blends for

longer than one minute,

friction from the blades

can cause ingredients

to heat and generate

internal pressure inside

the vessel. If a blending

vessel becomes warm

WARNING!

4

to the touch, turn o the

machine and allow the

vessel to cool completely

before carefully opening,

pointed away from your

body to avoid injury.

BLADE SAFETY

Blades are sharp!

Handle carefully. Use

care when handling

any blade. To avoid

laceration injury, do

not handle or touch

any blade edge.

Caution must be

observed when

emptying vessels and

during cleaning.

AVOID CONTACT WITH

MOVING PARTS! Keep

hands and utensils

out of and away from

blades while blending

food to reduce the

risk of severe personal

injury.

• After blending, turn

the unit o. Wait to

remove the pitcher

from the motor base

until the blades come

to a full stop and the

unit powers down

completely. Taking

the vessel o the unit

prior to complete

power down can cause

damage to the blade

coupling or motor gear.

Never use the nutribullet®

Blender without adding

liquid, as doing so may

damage the blades.

• The cyclonic action®

of your nutribullet®

Blender requires the

use of liquids to make

smoothies and other

nutritious items. The

nutribullet® Blender is

not intended to be used

without liquids, or as

an ice crusher. ALWAYS

ADD LIQUID to your

recipe.

• DO NOT USE the

nutribullet® Blender for

grinding dry ingredients

such as grains, cereal,

or coee, as this may

damage the motor

and blade.

PITCHER SAFETY

• Always operate the

pitcher with the pitcher

lid securely in place.

• With recipes that require

certain ingredients to

be incorporated during

blending, ﬁrst add the

WARNING!WARNING!

5

base ingredients, seal the

pitcher lid with vented

lid cap attached, and

begin blending. Then,

once the ingredients are

well mixed, twist open

the vented lid cap and

carefully pour or drop

ingredients into the

mixture.

• If you need to push

ingredients closer to the

blade, ONLY USE THE

TAMPER PROVIDED with

the nutribullet® Blender

conﬁguration. DO NOT

use any apparatus other

than the tamper to push

ingredients toward the

blade. The tamper is

speciﬁcally designed

not to come in contact

with the blade. Spatulas,

spoons and other tools

can make contact with

the blade, which may

result in damage to the

machine, damage to

property, and possible

injury.

• NEVER USE YOUR

FINGERS OR ANY PART

OF YOUR HAND TO

PUSH INGREDIENTS

DOWN TOWARD THE

BLADE. Only use the

provided tamper.

Remember to use extra

caution when blending

hot liquids or ingredients

in the pitcher.

• Spray or escaping

steam may cause

burns and/or

property damage.

Do not ﬁll container

above the maximum

capacity lines indicated

for liquids and

solid ingredients.

Always begin blending

hot ingredients on the

LOW setting.

Keep hands and other

exposed skin away from

lid opening to prevent

possible burns.

ELECTRICAL SAFETY

• Do not use this product

in locations with

dierent electrical

speciﬁcations or plug

types. Do not operate

with any type of plug

adapter or voltage

converter device,

as these may cause

electrical shorting, ﬁre,

electric shock, personal

injury, or product

damage.

6

• The use of attachments,

including canning jars,

is not recommended

and may cause ﬁre,

electric shock, personal

injury, or product

damage and will void

the product’s warranty.

• To avoid the risk of

electric shock, never

immerse the cord,

plug, or motor base

of the nutribullet® in

water or other liquids.

Discontinue use if the

cord, plug, or motor

base is damaged.

• Always POWER OFF

and UNPLUG the

nutribullet® Blender

when it is not in use or

BEFORE assembling,

disassembling,

changing accessories,

or cleaning. Do not

attempt to handle the

nutribullet® Blender

until all parts have

stopped moving.

• Do not allow the cord to

hang over the edge of

the table or counter. Do

not pull, twist, or damage

the power cord. Do not

allow the cord to touch

hot surfaces, including

the stove.

• If the motor stops

working, unplug the

motor base and let

it cool for at least

15 minutes before

attempting to use it

again. Your nutribullet®

Blender has an internal

thermal breaker that

shuts o the motor when

it overheats. The thermal

breaker will reset when

the unit is unplugged,

and the thermal breaker

cools down suciently.

• If the supply cord is

damaged, it must

be replaced by the

manufacturer, its service

agent or similarly

qualiﬁed persons in

order to avoid a hazard.

CAUTION: In order to

avoid a hazard due to

inadvertent resetting

of the thermal cut-out,

this appliance must not

be supplied through

an external switching

device, such as a timer,

or connected to a circuit

that is regularly switched

on and o by the utility.

WARNING!

7

STOVETOP

HEATING SAFETY

To heat items that

have been blended at

room temperature or

cooler (21°C/70°F or

less), transfer mixture

to a stovetop pot to

heat. Always use a

thermometer to test the

internal temperature

of cooked ingredients;

they may feel cool to

the touch, yet still be

hot inside.

The nutribullet® Blender

is not intended for use

on the stove top. Do

not place the motor

base or any nutribullet®

accessory on the stove

or immerse in boiling

water. This may result

in damage to the

accessory.

VENTILATION WARNINGS

• To prevent a ﬁre

hazard, power base

openings (underneath

the motor base)

should be free of

dust or lint and never

obstructed with

ﬂammable materials

such as newspapers,

tablecloths, napkins,

dishtowels, place mats

or other similar type

materials.

• CAUTION! Always

operate the nutribullet®

Blender on a level

surface, leaving

unobstructed space

beneath and around the

motor base to permit

proper air circulation.

Vents on the bottom

of the product are

provided for ventilation

to ensure reliable motor

operation and to prevent

overheating.

MEDICAL SAFETY

• The information

contained in the User

Guide and Recipe Guide

is not meant to replace

the advice of your

physician. Always

consult your physician

regarding health and

nutrition concerns.

MEDICATION

INTERACTIONS:

• If you are taking any

medication, especially

cholesterol-lowering

medication, blood

thinners, blood pressure

8

drugs, tranquilizers,

or antidepressants,

please check with your

physician before trying

any of the recipes

contained in this user

guide or recipe guide.

• Avoid blending the

following seeds and

pits, as they contain

a chemical known to

release cyanide into the

body when ingested:

apple seeds, cherry pits,

plum pits, peach pits,

and apricot pits. Fruit

pits may also cause

damage to the pitcher.

ADDITIONAL

INSTRUCTIONS FOR

PROPER USAGE

• Do not place any of the

nutribullet® Blender

parts in a microwave,

oven, in a stovetop pot,

or immerse in boiling

water, as this may result

in damage to the part.

• TO AVOID LEAKAGE,

DO NOT OVERFILL

THE PITCHER! Your

pitcher is marked with

two MAX lines: one for

solid ingredients (higher

line) and one for liquids

(lower line). When ﬁlling

the blender, make sure

your ingredients do not

exceed their respective

MAX lines. Exceeding

either MAX line can

result in leakage, and

may lead to dangerous

pressurization, which

can cause the vessel

and blade assembly to

separate, potentially

resulting in personal

injury and/or property

damage.

• The pitcher is speciﬁc

to the exact model of

nutribullet® Blender

you possess. Use of

incompatible parts (parts

from other models)

may result in damage

to your nutribullet®

Blender or create safety

hazards. When ordering

replacement parts on

nutribullet.com or via

customer service, please

specify the machine

model to ensure you

receive parts that

are compatible with

your unit.

• Periodically inspect all

nutribullet® Blender

components for damage

9

or wear that may impair

proper function or

present an electrical

hazard. Make sure that

the power cord and

plug are undamaged.

Discontinue use and

replace blending vessels

if you detect cracking,

cloudiness, or damage

to the plastic. Ensure that

the blades rotate freely

and that the structure is

undamaged. Make sure

that the motor base is

unobstructed and clean.

Follow maintenance

recommended in the

User Guide and never

operate your nutribullet®

Blender with damaged

components. If your

nutribullet® Blender

malfunctions in any way,

immediately discontinue

use and contact

customer service.

You may purchase

new nutribullet® cups,

pitchers, and easy-

twist extractor blades

at nutribullet.com or

by contacting customer

service.

Save these

instructions!

If you have any comments,

questions, or concerns,

please go to nutribullet.com.

!

10

11

Contents

12 What’s included

13 Assembly guide

14 Getting started

14 Safety guide

15 Pitcher assembly & use

18 Blending control panel

19 How to use the blending control panel

20 Care & maintenance

20 How to clean the nutribullet®

21 How to store

21 Replacement parts

Thank you for purchasing the nutribullet® Blender.

12

What’s included

1 pitcher with

integrated blade

1 motor base

1 pitcher lid

with vented lid cap

1 tamper

13

Assembly guide

vented lid cap

pitcher lid

pitcher

tamper

easy-pour spout

integrated blade

blender control panel

motor base

suction cup feet

Steam and splatters can escape

through the vented lid, potentially

causing scalding and/or burns.

NEVER blend hot liquids in your

pitcher without the pitcher lid

and lid cap attached. The lid cap

is ventilated to allow steam and

pressure to release, while guarding

against excess splashing.

When blending hot liquids, add

liquid and solid ingredients to your

pitcher below their respective

MAX lines. Attach the pitcher lid

with the lid cap inserted. Press

the POWER icon, then begin

blending on the LOW setting. Once

ingredients are integrated and

the mixture is level (no splashing),

increase speed as needed.

Getting started

PLEASE KEEP

THESE IMPORTANT

SAFEGUARDS IN

MIND WHEN USING

THE APPLIANCE:

• Make sure the base is plugged in

for use.

• DO NOT attempt to operate the

blender pitcher on the appliance

without attaching the pitcher lid and

vented lid cap.

• Never run the appliance while empty.

• Appliance accessories are not

intended to be used in the microwave

as it may damage the accessories.

• Never leave the appliance

unattended while in use.

Use extra caution when

blending hot liquids in

the pitcher.

WARNING!

14

15

Pitcher assembly

& use

Place the pitcher onto the

motor base — handle facing

to the right of the blending

control panel, never towards

the back — and gently twist

clockwise so it locks in place.

When you hear the click, it’s

locked and ready to blend.

NOTE: If you are left-handed, place

the handle facing towards the center

of the blending control panel and

twist clockwise.

3

4

Add the ingredients to the

pitcher, making sure they do

not exceed the MAX line.

NOTE: The blending pitcher is

marked with two MAX lines: one for

solid ingredients (higher line) and

one for liquids (lower line). When

ﬁlling the blender, make sure your

ingredients do not exceed their

respective MAX lines.

1 Review all warning and

caution statements in the

Important Safeguards

section (pg 2-9) and

on the previous page before

proceeding to Step 2.

2 Place the motor base on

a clean, dry, level surface

such as a counter or table.

5

Place the pitcher lid with

vented lid cap attached on

the pitcher, making sure it’s

aligned to the handle.

6

Plug the power cord into

an electrical outlet and

press POWER to turn on

the blender.

LOW

7

To start blending, select

your speed on the blending

control panel.

NOTE: Proceed to the blending

control panel chart on page 18

for speed deﬁnitions.

CAUTION: Do not use any

apparatus other than the

tamper to push ingredients

toward the blade. The tamper

is specifically designed not to

come in contact with the blade.

Spatulas, spoons and other

tools are long enough to reach

the blade, which may result

in damage to the machine,

damage to property, and/or

possible injury.

NOTE: If you need to add

additional ingredients while

blending, switch the setting to

LOW and remove the vented

lid cap from your pitcher lid,

leaving the lid attached. Add

ingredients through the hole

in the top of the lid, followed

by the tamper if necessary.

Replace the vented lid cap, then

increase to your desired speed.

DO NOT attempt to add items

through the vent hole when

blending hot ingredients.

16

17

Twist pitcher counterclockwise

and lift o the motor base.

Pour and enjoy!

If the ingredients stick to

the side of the pitcher, stop

the appliance by pressing

POWER and wait for

the blade to stop turning.

Then remove the pitcher

lid and use the tamper to

dislodge the ingredients.

When ﬁnished, replace the

lid and continue blending.

if the ingredients continue

to stick, consider adding a

little more liquid.

8

11

Press POWER to turn o

the unit completely.

When you have reached

your desired consistency,

stop the appliance by

pressing POWER

or the speed you selected

and wait for the blades to

stop turning.

WARNING: Blades are sharp. Never

insert your hands into the pitcher.

9

10

18

TURNING ON/OFF

The power button actuates

the master power of the

appliance. When pressed, this

button lights up to indicate the

motor is powered on, and the

other functions can be used.

Always turn the master power

o and unplug the unit when

the machine is not in use.

Blending control panel

LOW SPEED

Use to mix thin batters,

gravies, marinades; scramble

eggs; process cooked foods

and uncooked fruits.

MEDIUM SPEED

Use to cream soups, mix

dips, grind nuts, and

blend sauces, spreads,

mixed drinks, powdered

drinks, and milkshakes.

19

How to use the blending control panel

HIGH SPEED

Use to liquefy thick mixtures

and extract frozen fruits and

vegetables into smoothies.

PULSE

Use to control chopping

and processing.

WARNING: DO NOT use this

setting with hot ingredients!

TO SELECT A SPEED

Select a speed and press once

to turn on. The button will

illuminate. To pause/stop the

unit, press the button a second

time — it will de-illuminate — or

press POWER . While in the

idle-mode, the POWER button

will remain lit. To fully power

down after pausing, press

POWER and unplug the unit.

NOTE: When using the pitcher, speeds

will run until paused/stopped.

PULSE

Press and release the PULSE

button to chop ingredients.

If you hold the PULSE button

down it will continue to run until

you release it.

20

Care & maintenance

• Do not attempt to remove any

pieces from the motor base.

• Use a sponge or dish cloth

dampened with warm soapy

water to wipe down the

motor base until clean.

• To clean leakage residue

from the motor base, wipe

with a damp sponge and

warm water.

• If necessary, you may use

a small brush to scrub the

actuator system area to

ensure it’s clean.

WARNING: Never submerge

the motor base in water.

nutribullet® PITCHER:

WARNING: Blades are sharp!

Use caution when cleaning

the pitcher.

• The pitcher is dishwasher-

safe. We recommend rinsing

and brieﬂy scrubbing it with

a dish brush to remove any

remaining debris before

placing in the dishwasher.

NEVER use the sanitize cycle

to wash the pitcher — heat

this high can warp the plastic.

• If preferred, hand-wash the

pitcher with soap and water.

Stuck-on ingredients might

require extra scrubbing from

a dish brush or sponge.

Here’s how to clean

the nutribullet®:

Please follow the below

cleaning instructions before

the ﬁrst use, and after each use.

STEP 1: The most important

thing — ALWAYS POWER OFF

THE UNIT and UNPLUG the mo-

tor base from the power outlet

when it is not in use. Do not

attempt to handle the applian-

ce until all parts have stopped

moving! This includes during

assembly and disassembly,

while changing accessories du-

ring cleaning, and any time you

leave the machine unattended.

STEP 2: Detach the pitcher

from the motor base.

STEP 3: Clean the individual

components (motor base,

pitcher) as recommended

in the following pages.

MOTOR BASE:

• To avoid risk of injury, NEVER

attempt to clean the actuator

system on the motor base

while the nutribullet® Blender

is plugged in.

La pagina si sta caricando...

NutriBullet ZNBF30400Z Guida utente

NutriBullet ZNBF30400Z Guida utente

in altre lingue

Documenti correlati

Altri documenti