ESAB MechTig 4000i Aristo® MechTig 4000i Manuale utente
- Categoria
- Sistema di saldatura
- Tipo
- Manuale utente
Questo manuale è adatto anche per
Valid for serial no. 652--xxx--xxxx0460 194 027 070529
MechTig 4000i
Aristot
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 14..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 5.......................................................
2.1 Îáîðóäîâàíèå 5...........................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 6................................
4ÓÑÒÀÍÎÂÊÀ 7.......................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 7..................................................
4.2 Ðàñïîëîæåíèå 7...........................................................
4.3 Ñåòü ýëåêòðîïèòàíèÿ 7.....................................................
4.4 Ïîäêëþ÷åíèå íàãðóçî÷íîãî ðåçèñòîðà 8....................................
5 ÏÐÈÌÅÍÅÍÈß 9....................................................
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ 9.....................................
5.2 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ 10............................................
5.3 Óïðàâëåíèå âåíòèëÿòîðàìè 10...............................................
5.4 Çàùèòà îò ïåðåãðåâà 10.....................................................
5.5 Áëîê îõëàæäåíèÿ 10........................................................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 11.................................
6.1 Èñòî÷íèê ñâàðî÷íîãî òîêà 11................................................
6.2 Èíñòðóìåíò äëÿ ñâàðêè òðóá 12..............................................
7 ÏÎÈÑÊ È ÓÑÒÐÀÍÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ 12.......................
8 ÈÍÔÎÐÌÀÖÈß ÄËß ÇÀÊÀÇÀ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 13.................
ÑÕÅÌÀ 24..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 26.....................................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 27...........................
dp03d1ra -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèê è
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàá î÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
S èíñòðóêöèè ïî ýêñïëóàòàöèè
S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
S íàçíà÷åíèå îáîðóäîâàíèÿ
S ïðàâèëà òåõíèêè áåçîïàñíîñòè
S òåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàá î÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
S çàùèòó âñåõ ëèö îò â îçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
S íå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàò ü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåòñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.
S Çàïðåù àåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ðàáîò.
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ ò ðóá.
ÂÍÈÌÀÍÈÅ!
Äàííîå èçäåëèå ïðåäíàçíà÷åíî òîëüêî äëÿ äóãîâîé ñâàðêè.
RU
dp03d1ra -- 5 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑ ÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎËÍÈÒÅËß ÐÀÁÎÒ, ÒÀÊ È ÄËß
ÏÎÑÒ ÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ
ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒ
ÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀ
ÂËÅÍÍÛÅ ÈÇÃÎÒÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄ ÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå ê îíò àêòà íàõîäÿùèõñ ÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëà,ìîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññò îÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìî æíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæ åíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñò îðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ØÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
2 ÂÂÅÄÅÍÈÅ
MechTig 4000i ÿâëÿåòñÿ èñòî÷íèêîì ïèòàíèÿ ñâàðî÷íûì òîêîì,
ïðåäíàçíà÷åííûì äëÿ ìåõàíèçèðîâàííîé ñâàðêè.
Èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â êîìáèíàöèè ñ áëîêîì
óïðàâëåíèÿ MechControl 2 èëè MechControl 4.
Âñå íàñòðîéêè âûïîëíÿþòñÿ ïðè ïîìîùè áëîêà óïðàâëåíèÿ.
Àêñåññóàð² îò ä ëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 27.
2.1 Îáîðóäîâàíèå
Èñòî÷íèê ïèòàíèÿ ïîñòàâëÿåòñÿ ñ:
S íàãðóçî÷íûì ðåçèñòîðîì;
S îáðàòíûì êàáåëåì äëèí îé 5 ì;
S ðóêîâîäñòâîì.
RU
dp03d1ra -- 6 --
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
MechTig 4000i
Íàïðÿæåíèå ñåòè 400 Â, +/--10%, 3∼ 50/60 Ãö
Ïåðâè÷íûé òîê I
ìàêñ.
21,5 A
Ïîòðåáëÿåìàÿ ìîùíîñòü õîëîñòîãî õîäà â
ðåæèìå ýíåðãîñáåðåæåíèÿ, â òå÷åíèå 6, 5
ìèí ïîñëå ñâàðêè
60 Âò
Äèàïàçîí óñòàâîê 4 - 400 A
Äîïóñòèìàÿ íàãðóçêà
Ê îýôôèöèåíò íàãðóçêè 35%
Ê îýôôèöèåíò íàãðóçêè 60 %
Ê îýôôèöèåíò íàãðóçêè 100%
400 À / 26 Â
320 À / 23 Â
250 À / 20 Â
Êîýôôèöèåíò ìîùíîñòè ïðè
ìàêñèìàëüíîì òîêå
0,75
Êïä ïðè ìàêñèìàëüíîì òîêå 97,1 %
Íàïðÿæåíèå õîëîñòîãî õîäà 78 -90 Â
Ðàáî÷àÿ òåìïåðàòóðà îò -10 äî +40˚C
Òåìïåðàòóðà ïðè òðàíñïîðòèðîâêå îò -25 äî +55˚C
Ïîñòîÿííûé ýêâèâàëåíòíûé óðîâåíü
çâóêîâîãî äàâëåíèÿ
<70äÁ(A)
Ðàçìåðû, ä x ø x â 625 x 394 x 776 ìì
Ìàññà 81 ê ã
Êëàññ èçîëÿöèè H
Ê ëàññ çàùèòû êîðïóñà IP 23
Êëàññ ïðèìåíåíèÿ
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ (â %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðî òîê îì.
Áëîê îõëàæäåíèÿ
Õîëîäîïðîèçâîäèòåëüíîñòü 2 kò ïðè ðàçíèöå òåìïåðàòóð 40˚Cèðàñõîäå1ë/ìèí
Òèï îõëàæäåíèÿ 50 % âîäû / 50 % monoýòèëåíãëèêîëÿ
Îáúåì îõëàæäàþùåé
æèäêîñòè
5,5 ë
Ìàêñèìàëüíûé ðàñõîä âîäû 2,0 ë/ìèí
RU
dp03d1ra -- 7 --
4ÓÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
ÏÐÈÌÅ×ÀÍÈÅ!
Ïðèñîåäèíèòü èñòî÷íèê ïèòàíèÿ ê ýëåêòðè÷åñêîé ñåòè ñ ïîëíûì ñîïðîòèâëåíèåì 0,200 Îì
èëè íèæå. Åñëè ïîëíîå ñîïðîòèâëåíèå ñåòè âûøå, âîçíèêàåò ðèñê ìèãàíèÿ îñâåòèòåëüíûõ
ïðèáîðîâ.
4.1 Èíñòðóêöèè ïî ïîäúåìó
Ñ èñòî÷íèê îì ïèòàíèÿ Ñ òîêîñíèìàòåëåì è èñòî÷íèêîì ýëåêòðîïèòàíèÿ
4.2 Ðàñïîëîæåíèå
Ðàçìåñòèòå èñòî÷íèê ñâàðî÷íîãî òîêà òàêèì îáðàçîì, ÷òîáû èìåþùèåñÿ â
íåì î òâåðñòèÿ äëÿ ïîäâîäà è îòâîäà îõëàæäàþùåãî âîçäóõà íå áûëè
çàãðàæäåíû.
4.3 Ñåòü ýëåêòðîïèòàíèÿ
Óáåäèòåñü â òîì, ÷òî èñòî÷íèê ñâàðî÷íîãî òîêà ïîäêëþ÷åí ê ñåòè
ýëåêòðîïèòàíèÿ ñ òðåáóåìûì íàïðÿæåíèåì è çàùèùåí ïðåäîõðàíèòåëÿìè
òðåáóåìîãî íîìèíàëà. Ñì. ïàñïîðòíóþ òàáëè÷êó ñ ïàðàìåòðàìè ñåòè
ýëåêòðîïèò àíèÿ. Íåîáõîäèìî îáåñïå÷èòü çàùèòíîå çàçåìëåíèå â
ñîîòâå òñòâèè ñ äåéñòâóþùèìè íîðìàìè.
RU
dp03d1ra -- 8 --
Ðåêîìåíäóåìûå íîìèíà ëû ïðå äîõ ðàíèòåëåé è ìèíèìàëüíûå ñå÷å íèÿ
êàáåëåé
Mechtig 4000i 400 Â 3μ 50 Ãö
Íàïðÿæåíèå ñåòè 400 Â
Ïëîùàäü ïîïåðå÷íîãî ñå÷åíèÿ
ñèëîâîãî êàáåëÿ ïèòàíèÿ, ìì
2
4G4
Ôàçíûé òîê, Iäåéñòâ. 13 A
Ïðåäîõðàíèòåëü,
óñòîé÷èâûé ê ïåðåíàïðÿæåíèÿì,
òèï C MCB
Ïëîùàäü ïîïåðåöíîãî ñåöåíèÿ
ñâàðî÷íîãî êàáåëÿ
16 A
20 A
70 mm
2
Ïðèìå÷àíèå!
Ïðèâåäåííûå âûøå çíà÷åíèÿ ïëîùàäè ïîïåðå÷íîãî ñå÷åíèÿ ñèëîâûõ êàáåëåé è íîìèíàëû
ïðåäîõðàíèòåëåé ñîîòâåòñòâóþò øâåäñêèì íîðìàì. Ýêñïëóàòàöèÿ èñòî÷íèêà ñâàðî÷íîãî
òîêà äîëæíà îñóùåñòâëÿòüñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íàöèîíàëüíûìè
íîðìàòèâíûìè äîêóìåíòàìè.
4.4 Ïîäêëþ÷åíèå íàãðóçî÷íîãî ðåçèñòîðà
Åñëè ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ íå ïîäêëþ÷åí, ãíåçäî äëÿ
ïîäê ëþ÷åíèÿ ïóëüòà äèñòàíöèîííîãî óïðàâëåíèÿ äîëæíî áûòü îñíàùåíî
íàãðóçî÷íûì ðåçèñòîðîì âî èçáåæàíèå ïîìåõ íà ëèíèè ñâÿçè.
RU
dp03d1ra -- 9 --
5 ÏÐÈÌÅÍÅÍÈß
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ
1 Ñîåäèíåíèå äëÿ ëèíèè îõëàæäàþùåé
æèäêîñòè îò áëîêà óïðàâëåíèÿ -
ÊÐÀÑÍÎÅ
9 Áåëàÿ èíäèêàòîðíàÿ ëàìïà - Èñòî÷íèê
ïèòàíèÿ ÂÊË. (ON)
2 Ñîåäèíåíèå ñ ñèñòåìîé ELP*, äëÿ
ëèíèè îõëàæäàþùåé æèäêîñòè ê áëîêó
óïðàâëåíèÿ - ÑÈÍÅÅ
10 Îðàíæåâàÿ èíäèêàòîðíàÿ ëàìïà -
Ïåðåãðåâ
3 Äîëèâ îõëàæäàþùåé æèäêîñòè 11 Ïàñïîðòíàÿ òàáëè÷êà ñ ïàðàìåòðàìè
ñåòè ýëåêòðîïèòàíèÿ.
4 Ñîåäèíåíèå äëÿ ïîäâîäà ñâàðî÷íîãî
òîêà (+) ê áëîêó óïðàâëåíèÿ
12 Ñîåäèíåíèå (CAN) äëÿ êîíòðîëüíîãî
êàáåëÿ èëè íàãðóçî÷íîãî ðåçèñòîðà
5 Ñîåäèíåíèå (CAN) äëÿ ïîäêëþ÷åíèÿ
êîíòðîëüíîãî êàáåëÿ ê áëîêó
óïðàâëåíèÿ
13 Ñîåäèíåíèå äëÿ ïîäâîäà ñâàðî÷íîãî
òîêà (+) âýòîéìîäåëèíå
èñïîëüçóåòñÿ
6 Ñîåäèíåíèå äëÿ ïîäâîäà ñâàðî÷íîãî
òîêà (-) ê áëîêó óïðàâëåíèÿ
14 Ñîåäèíåíèå äëÿ ïîäâîäà
îõëàæäàþùåé âîäû - ÑÈÍÅÅ, âýòîé
ìîäåëè íå èñïîëüçóåòñÿ
7 Ñîåäèíåíèå äëÿ ïîäêëþ÷åíèÿ
èçìåðèòåëüíîãî êàáåëÿ AVC ê áëîêó
óïðàâëåíèÿ (AVC= óïðàâëåíèå ïî
íàïðÿæåíèþ äóãè)
15 Ñîåäèíåíèå äëÿ ïîäâîäà
îõëàæäàþùåé âîäû - ÊÐÀÑÍÎÅ, âýòîé
ìîäåëè íå èñïîëüçóåòñÿ
8 Ñåòåâîé âûêëþ÷àòåëü, 0 / 1 / ÏÓÑÊ
* ELP = Íàñîñ ñ ëîãè÷åñêèì óïðàâëåíèåì ESAB, ñì. ïóíêò 5.5
RU
dp03d1ra -- 1 0 --
5.2 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ
Âêëþ÷èòå ïèòàíèå, ïîâåðíóâ âûêëþ÷àòåëü (8) â ïîëîæåíèå ”START” (ÏÓÑÊ).
Îòïóñòèòå âûêëþ÷àòåëü, è îí âåðíåòñÿ â ïîëîæåíèå ”1”.
Åñëè òðåáóåòñÿ âðåìåííî îòêëþ÷èòü ïèòàíèå â ïðîöåññå ñâàðêè, à çàòåì
âíîâü âêëþ÷èòü åãî, òî áëîê ïèòàíèÿ áóäåò îñòàâàòüñÿ îáåñòî÷åííûì äî òåõ
ïîð, ïîêà âûêëþ÷àòåëü ñíîâà íå áóäåò âðó÷íóþ ïîâåðíóò â ïîëîæåíèå
”START” (ÏÓÑÊ).
×òîáû âûêëþ÷èòü èñòî÷íèê ïèòàíèÿ, ïîâåðíèòå âûêëþ÷àòåëü â ïîëîæåíèå ”0”.
Ïîñëå øòàòíîãî îòêëþ÷åíèÿ ñåòåâîãî ïèòàíèÿ èëè áëîêà ïèòàíèÿ ïàðàìåòðû
ñâàðêè âîññòàíàâëèâàþòñÿ ïðè ïîñëåäóþùåì âêëþ÷åíèè áëîêà.
5.3 Óïðàâëåíèå âåíòèëÿòîðàìè
Èñòî÷íèê ïèòàíèÿ îñíàùåí òàéìåðîì, îáåñïå÷èâàþùèì ïðîäîëæåíèå ðàáîòû
âåíòèëÿòîðîâ â òå÷åíèå 6,5 ìèí ïîñëå ïðåêðàùåíèÿ ñâàðêè, è ïåðåê ëþ÷åíèå
áëîêà â ðåæèì ýíåðãîñáåðåæåíèÿ. Ïðè âîçîáíîâëåíèè ñâàðêè âåíòèëÿòîðû
çàïóñêàþ òñÿ âíîâü.
Âåíòèëÿòîðû ðàáîòàþò íà ïîíèæåííûõ îáîðîòàõ ïðè ñâàðî÷íûõ òîêàõ äî 144 A
èíàïîëíûõîáîðîòàõïðèáîëüøèõòîêàõ.
5.4 Çàùèòà îò ïåðåãðåâà
Èñòî÷íèê ñâàðî÷íîãî òîêà èìååò óñòðîéñòâî çàùèòû îò ïåðåãðåâà,
ñðàáàòûâàþù åå, êîãäà òåìïåðàòóðà ñòàíîâèò ñÿ ñëèøêîì âûñîêîé. Ïðè ýòîì
ïîäà÷à ñâàðî÷íîãî òîêà ïðåêðàùàåòñÿ è â ïåðåäíåé ÷àñòè èñòî÷íèêà ïèòàíèÿ
çàãîðàåòñÿ îðàíæåâàÿ èíäèêàòîðíàÿ ëàìïà. Êîãäà òåìïåðàòóðà ñíèçèòñÿ, ðåëå
çàùèòû îò ïåðåãðóçêè àâòîìàòè÷åñêè âîçâðàùàåòñÿ â èñõîäíîå ïîëîæåíèå.
5.5 Áëîê îõëàæäåíèÿ
Ïîäâîä âîäû
Áëîê îõëàæäåíèÿ îáîðóäîâàí ñèñòåìîé ïðîâåðêè ïîäñîåäèíåíèÿ âîäÿíûõ
øëàíãîâ ELP (ESAB Logic Pump = Ëîãè÷åñêèé Íàñîñ ESAB).
Äâóõïîçèöèîííûé âûêëþ÷àòåëü ýëåêòðîïèòàíèÿ äîëæåí íàõîäèòüñÿ â
ïîëîæåíèè ”0” (Off) ïðè ïîäñîåäèíåíèè ñâàðî÷íîãî èíñòðóìåíòà ñ âîäÿíûì
îõëàæäåíèåì.
Åñëè ïîäñîåäèíåí ñâàðî÷íûé èíñòðóìåíò ñ âîäÿíûì îõëàæäåíèåì, òî
ïðîèñõîäèò àâòîìàòè÷åñêèé çàïóñê âîäÿíîãî íàñîñà, êîãäà ãëàâíûé
äâóõïîçèöèîííûé âûêëþ÷àòåëü ïîâåðíó ò â ïîëîæåíèå ”START” (ÏÓÑÊ) è
íà÷èíàåòñÿ ïðîöåññ ñâàðêè. Ïîñëå ïðåêðàùåíèÿ ñâàðêè íàñîñ ïðîäîëæàåò
ðàáîòàòü â òå÷åíèå 6,5 ìèí, à çàòåì ïåðåêëþ÷àåòñÿ â ðåæèì
ýíåðãîñáåðåæåíèÿ.
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû áëîêèðóåò èñòî÷íèê ïèòàíèÿ,
åñëè ïîòîê îõëàæäàþùåé âîäû îñòàíàâëèâàåòñÿ. Ïðè ýòîì ïîäà ÷à ñâàðî÷íîãî
òîêà ïðåêðàùàåòñÿ è íà áëîêå óïðàâëåíèÿ îòîáðàæàåòñÿ àâàðèéíûé ñèãíàë.
RU
dp03d1ra -- 1 1 --
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
“Ðåã óëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
áåçîïàñíîé è íàäåæíîé ýêñïëóàòàöèè”.
Òåõíè÷åñêîå îáñëóæèâàíèå äîëæíî âûïîëíÿòüñÿ ïðîôåññèîíà ëüíî
ïîäãîòîâëåííûì ïåðñîíàëîì.
Òîëüêî ëèöà, èìåþùèå êâàëèôèêàöèþ ýëåêòðèêà (àòòåñòîâàííûé ïåðñîíàë),
èìåþò ïðàâî ñíèìàòü ïàíåëè, îáåñïå÷èâàþùèå áåçîïàñíîñòü ðàáîòû.
Ïðèìå÷àíèå:
à àðàíòìèéíûå îáÿçàòåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïð îèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
6.1 Èñòî÷íèê ñâàðî÷íîãî òîêà
Ðåã óëÿðíî ñëåäèòå çà òåì, ÷òîáû ñâàðî÷íûé èñòî÷íèê ïèòàíèÿ íå áûë çàáèò
ãðÿçüþ.
Ïåðèîäè÷íîñòü è ïðèìåíÿåìûå ìåòîäû ÷èñòêè çàâèñÿò îò
S ïðîöåññà ñâàðêè;
S âðåìåíè ãîðåíèÿ äóãè;
S ðàçìåùåíèÿ îáîðóäîâàíèÿ;
S îêðóæàþùèõ óñëîâèé.
Îáû÷íî áûâàåò äîñòàòî÷íî ïðîäóâàòü èñòî÷íèê ïèòàíèÿ ñóõèì ñæàòûì
âîçäóõîì (ïðè ïîíèæåííîì äàâëåíèè) îäèí ðàç â ãîä.
Çàñîðåííûå èëè çàêóïîðåííûå îòâåðñòèÿ äëÿ ï îäâîäà è îòâîäà âîçäóõà òàêæå
ìîãóò ñòàòü ïðè÷èíîé ïåðåãðåâà.
Î÷èñòêà ïðîòèâîïûëåâîãî ôèëüòðà
S Óñòàíîâèòå íà ìåñòî çàùèòíóþ
ðåøåòêó âåíòèëÿòîðà ñ
ïðîòèâîïûëåâûì ôèëüòðîì (1).
S Îòêèíüòå çàùèòíóþ ðåøåòêó (2).
S Èçâëåêèòå ïðîòèâîïûëåâîé
ôèëüòð (3).
S Ïðîäóéòå ôèëüòð íà ÷èñòî ñæàòûì
âîçäóõîì (ïîíèæåííîãî äàâëåíèÿ).
S Çàìåíèòå ýòîò ôèëüòð íà ôèëüòð
áîëåå òîíêîé î÷èñòêè íà ñòîðîíå
ðåøåòêè (2) (ñíàðóæè îò èñòî÷íèêà ïèòàíèÿ).
S Óñòàíîâèòå íà ìåñòî çàùèòíóþ ðåøåòêó âåíòèëÿòîðà ñ ïðîòèâîïûëåâûì
ôèëüòðîì.
RU
dp03d1ra -- 1 2 --
Äîáàâëåíèå îõëàæäàþùåé æèäêîñòè
Äîëåéòå îõëàæäàþùóþ æèäêîñòü äî óðîâíÿ
çàëèâî÷íîã î îòâåðñòèÿ.
Ðåêîìåíäóåòñÿ ïðèìåíÿòü õëàäàãåíò ô. ESAB. Ñì.
ïðèíà äëåæíîñòè íà ñòð. 27.
ÑÎÁËÞÄÀÉÒÅ ÌÀÊÑÈÌÀËÜÍÓÞ ÎÑÒÎÐÎÆÍÎÑÒÜ!
Ñ îõëàæäàþùåé æèäêîñòüþ ñëåäóåò îáðàùàòüñÿ êàê ñ õèìè÷åñêèìè îòõîäàìè.
6.2 Èíñòðóìåíò äëÿ ñâàðêè òðóá
Äëÿ îáåñïå÷åíèÿ áåñïåðåáîéíîé ñâàðêè íåîáõîäèìî ÷åðåç ðåãóëÿðíûå
ïðîìåæó òêè âðåìåíè ÷èñòèòü è çàìåíÿòü ðàáîòàþùèå íà èçíîñ äåòàëè
èíñòðóìåíòà äëÿ ñâàðêè òðóá.
7 ÏÎÈÑÊ È ÓÑÒÐÀÍÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ
Ïðåæäå ÷åì âûçûâàòü àòòåñòîâàííîãî ñïåöèàëèñòà ïî îáñëóæèâàíèþ,
ïîïðîáóéòå ñàìîñòîÿòåëüíî âûïîëíèòü ðåêîìåíäóåìûå íèæå ïðîâåðêè.
Òèï íåèñïðàâíîñòè Ðåêîìåíäóåìûå ìåðû
Îòñóòñòâèå äóãè S Ïðîâåðüòå, âêëþ÷åí ëè âûêëþ÷àòåëü ïèòàíèÿ.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ êàáåëåé
ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà â åëè÷èíà òîêà.
S Ïðîâåðüòå ðàñõîä îõëàæäàþùåé æèäêîñòè.
S Ïðîâåðüòå óðîâåíü îõëàæäàþùåé æèäêîñòè.
 ïðîöåññå ñâàðêè ïðîïàë
ñâàðî÷íûé òîê.
S Ïðîâåðüòå, íå ñðàá îòàëè ëè ðåëå çàùèòû îò òåïëîâîé
ïåðåãðóçêè (ñðàáàòûâàíèå ðåëå îïðåäåëÿåòñÿ ïî
çàãîðàíèþ îðàíæåâîé ëàìïû íà ëèöåâîé ïàíåëè).
S Ïðîâåðüòå ðàñõîä îõëàæäàþùåé æèäêîñòè.
S Ïðîâåðüòå ïðåäîõðàíèòåëè â öåïè ïèòàíèÿ.
×àñòîå ñðàáàòûâàíèå ðåëå
çàùèòû îò òåïëîâîé
ïåðåãðóçêè.
S Ïðîâåðüòå, íå çàñîðèëñÿ ëè ïðîòèâîïûëåâîé ôèëüòð.
S Óáåäèòåñü â òîì, ÷òî íå ïðåâûøåíû íîìèíàëüíûå
çíà÷åíèÿ ïàðàìåòðîâ èñòî÷íèêà ïèòàíèÿ (ò. å. ÷òî
óñòðîéñòâî ðàáîòàåò áåç ïåðåãðóçêè).
Íèçêàÿ ýôôåêòèâíîñòü
ñâàðêè.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ êàáåëåé
ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà â åëè÷èíà òîêà.
S Óáåäèòåñü â òîì, ÷òî èñïîëüçóåòñÿ ýëåêòðîä/ïðîâîëîêà
òðåáóåìîãî òèïà.
S Ïðîâåðüòå ïðåäîõðàíèòåëè â öåïè ïèòàíèÿ.
S Óáåäèòåñü â òîì, ÷òî èñïîëüçóåòñÿ ñâàðî÷íûé ãàç
òðåáóåìîãî òèïà.
RU
dp03d1ra -- 1 3 --
8 ÈÍÔÎÐÌÀÖÈß ÄËß ÇÀÊÀÇÀ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ì îíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùåííûå ôèðìîé
ESAB.
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
RU
ENGLISH
-- 1 4 --
TOCe
1 DIRECTIVE 15........................................................
2SAFETY 15...........................................................
3 INTRODUCTION 17...................................................
3.1 Equipment 17................................................................
4 TECHNICAL DATA 17.................................................
5 INSTALLATION 18....................................................
5.1 Lifting instructions 18.........................................................
5.2 Location 18..................................................................
5.3 Mains power supply 18........................................................
5.4 Connecting the terminating resistor 19..........................................
6 OPERATION 20.......................................................
6.1 Connections and control devices 20............................................
6.2 Turning on the power source 20................................................
6.3 Fan control 21...............................................................
6.4 Overheating protection 21.....................................................
6.5 Cooling unit 21...............................................................
7 MAINTENANCE 21....................................................
7.1 Welding power source 22......................................................
7.2 Tube welding tool 22..........................................................
8 FAULT--TRACING 23..................................................
9 ORDERING SPARE PARTS 23..........................................
DIAGRAM 24............................................................
ORDERING NUMBER 26.................................................
ACCESSORIES 27.......................................................
-- 1 5 --
dp03d1ea
1DIRECTIVE
DECLARATION OF CONFORMITY
ESAB AB, Welding Equipment, SE--695 81 Laxå, Sweden, gives its unreserved guarantee that weld-
ing power source MechT ig 4000i from serial number 652 (2006 w.52) are constructed and tested in
compliance with the standard EN 60974--1 /--2 /--3 and EN 60974--10 in accordance with the require-
ments of directive (2006/95/EC) and (2004/108/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Kent Eimbrodt
Global Director
Equipment and Automation
Laxå 2006--12--15
2SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorized person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from drafts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
GB
-- 1 6 --
dp03d1ea
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is s afe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect y our eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect y our ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide yo u with all necessary welding protection an d accessories.
WARNING!
Read and understand the instruction manual before installing
or operating.
Do not use the power source for thawing frozen pipes.
WARNING!
This product is solely intended for arc welding.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human health!
GB
-- 1 7 --
dp03d1ea
3 INTRODUCTION
MechTig 4000i is a welding power source intended for mechanized welding.
The power source is intended for use with control unit M echControl 2 or
MechControl 4.
All settings are m ade from the control unit.
ESAB’s accessories for the product can be found on page 27.
3.1 Equipment
The power source is supplied with:
S terminating resistor
S 5 m return cable
S instruction m anual
4 TECHNICAL DATA
MechTig 4000i
Mains voltage 400 V, ±10%, 3∼ 50/60 Hz
Primary current I
max
21,5 A
No--load power demand when in the
energy--saving mode, 6.5 min. after welding
60 W
Setting range 4 -- 400 A
Permissible load
35% duty cycle
60 % duty cycle
100% duty cycle
400 A / 26 V
320 A / 23 V
250 A / 20 V
Power factor at maximum current 0,75
Efficiency at maximum current 97.1 %
Open --circuit voltage 78 -- 90 V
Operating temperature -- 1 0 t o + 4 0 ˚C
T ransportation temperature -- 2 5 t o + 5 5 ˚C
Continual sound pressure at no--load <70dB(A)
Dimensions lxwxh 625 x 394 x 776 mm
Weight 81 kg
Insulation class H
Enclosure class IP 23
Application class
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
GB
-- 1 8 --
dp03d1ea
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
Cooling unit
Cooling power 2kWat40˚C temp. difference and flow 1 l/min
T ype of cooling 50 % water / 50 % mono ethylene glycol
Coolant quantity 5.5 l
Maximum water flow 2.0 l/min
5 I NSTALLATION
The installatio n must be executed by a professional.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’ s responsibility to take adequate precautions.
NOTE!
Connect the power source to the electricity mains with a network impedance of 0.200 ohm or lower . If
the network impedance is higher there is a risk of flicker in the illuminators.
5.1 Lifting instructions
With power source With trolley and power source
5.2 Location
Position the welding power source such that its cooling air inlets and outlets are not
obstructed.
5.3 Mains power supply
Make sure that the welding power source is connected to the correct supply voltage
and that it is protected by the correct fuse rating. See rating plate with supply
connection data. A protective earth connection must be made in accordance with
regulations.
GB
-- 1 9 --
dp03d1ea
Recommend ed fuse sizes and minimum cable area
Mechtig 4000i 400 V 3μ 50 Hz
Mains voltage 400 V
Mains cable area mm
2
4G4
Phase current IRMS 13 A
Fuse
anti--surge
type C MCB
Welding cable area
16 A
20 A
70 mm
2
NOTE!
The mains cable areas and fuse sizes as shown above are in accordance with Swedish regulations.
Use the welding power source in accordance with the relevant national regulations.
5.4 Connecting the terminating resistor
To avoid communication interference, the remote socket must be fitted with a
terminating resistor, when a remote control unit is not connected.
GB
-- 2 0 --
dp03d1ea
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 15. Read through before you start using the equipment!
6.1 Connections and control devices
1 Connection for coolant from control unit --
RED
9 White indicating lamp – Power supply ON
2 Connection with ELP*, for coolant to
control unit -- BLUE
10 Orange indicating lamp – Overheating
3 Topping up with coolant 11 Rating plate with supply connection data
4 Connection for welding current (+) to
control unit
12 Connection (CAN) for control cable or for
terminating resistor
5 Connection (CAN) for control cable to
control unit
13 Connection for welding current (+), not
used on this model
6 Connection for welding current (--) to
control unit
14 Connecting for cooling water -- BLUE, not
used on this model
7 Connection for measurement cable AVC to
control unit (arc voltage control)
15 Connection for cooling water -- RED, not
used on this model
8 Mains power supply switch, 0 / 1 / START
*ELP = ESAB Logic Pump, see point 6.5.
6.2 Turning on the power source
Turn on the mains power by turning switch (8) to the ”START” position. Release the
switch, and it will return to the ”1” position.
If the mains power supply should be interrupted while welding is in progress, and
then be restor ed, the power unit will remain de--energised until the switch is again
turned manually to the ” START” position.
Turn the unit off by turning the switch to the ”0” position.
GB
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
ESAB MechTig 4000i Aristo® MechTig 4000i Manuale utente
- Categoria
- Sistema di saldatura
- Tipo
- Manuale utente
- Questo manuale è adatto anche per
in altre lingue
Documenti correlati
-
ESAB Mig 4000i Manuale utente
-
ESAB Arc 4000i Manuale utente
-
ESAB MechTig C2002i Aristo MechTig C2002i Manuale utente
-
-
ESAB MechTig 3000i Aristo® MechTig 3000i Manuale utente
-
-
-
-
ESAB Tig 4000i Manuale utente
-
ESAB Tig 4300i AC/DC Manuale utente