ESAB AristoMig 400 Manuale utente
- Categoria
- Sistema di saldatura
- Tipo
- Manuale utente
Questo manuale è adatto anche per
Valid for serial no. 050--xxx--xxxx, 105--xxx--xxxx,
347--xxx--xxxx, 445--xxx--xxxx, 524--xxx--xxxx
0458 814 027 060228
AristoMig 400
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 4...............................................
ENGLISH 16..............................................
-- 3 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Bestillingsnummer 31......................................
Reservedelsfortegnelse 32.........................................
Ðóññêèé
TOCr
-- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 5........................................
2 ÂÂÅÄÅÍÈÅ 7.......................................................
2.1 Îáîðóäîâàíèå 7...........................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 7................................
4ÓÑÒÀÍÎÂÊÀ 9.......................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 9..................................................
4.2 Ðàçìåùåíèå 9.............................................................
4.3 Ýëåêòðîìîíòàæ (ñ àâòîòðàíñôîðìàòîðîì) 10................................
4.4 Ñåòü ýëåêòðîïèòàíèÿ 11.....................................................
4.5 Íàãðóçî÷íûé ðåçèñòîð 11...................................................
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ 12...............................................
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ 12.....................................
5.2 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ 12............................................
5.3 Óïðàâëåíèå âåíòèëÿòîðàìè 13...............................................
5.4 Çàùèòà îò ïåðåãðåâà 13.....................................................
5.5 Áëîê îõëàæäåíèÿ 13........................................................
5.6 Ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ 13........................................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 14.................................
6.1 Î÷èñòêà âîçäóøíîãî ôèëüòðà 14.............................................
6.2 Ïîïîëíåíèå îõëàæäàþùåé æèäêîñòè 14.....................................
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ 15.................................
8 ÈÍÔÎÐÌÀÖÈß ÄËß ÇÀÊÀÇÀ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 15.................
ÑÕÅÌÀ 28..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 31.....................................................
ÑÏÈÑÎÊ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 32........................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 33...........................
ba34d0ra -- 5 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèêè
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàáî÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
S èíñòðóêöèè ïî ýêñïëóàòàöèè
S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
S íàçíà÷åíèå îáîðóäîâàíèÿ
S ïðàâèëà òåõíèêè áåçîïàñíîñòè
S òåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàáî÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
S çàùèòó âñåõ ëèö îò âîçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
S íå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàò ü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåòñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.
S Çàïðåù àåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
RU
ba34d1ra -- 6 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑ ÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎ ËÍÈÒÅËß ÐÀÁÎÒ, ÒÀÊ È ÄËß
ÏÎÑÒ ÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ
ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒ
ÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀ
ÂËÅÍÍÛÅ ÈÇà ÎÒ ÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß Ý ËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå êîíòàêòà íàõîäÿùèõñÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëà,ìîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññòîÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìîæíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåù åíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæåíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñòîðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ØÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæå íèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ð àáîò.
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ òðóá.
ÂÍÈÌÀÍÈÅ!
Âíèìàíèå!
Ýòî óñòðîéñòâî ïðåäíàçíà÷åíî èñêëþ÷èòåëüíî äëÿ ýëåêòðîäóãîâîé ñâàðêè!
RU
ba34d1ra -- 7 --
2 ÂÂÅÄÅÍÈÅ
Áëîê AristoMig 400 ïðåäñòàâëÿåò ñîáîé èñòî÷íèê ïèòàíèÿ äëÿ ýëåêòðîäóãîâîé
ñâàðêè â ñðåäå çàùèòíîãî ãàçà îáû÷íîé ñâàðî÷íîé ïðîâîëîêîé, ëèáî áåç ãàçà
ñ èñïîëüçîâàíèåì ïðîâîëîêè ñ ôëþñîì, íî ìîæåò áûòü òàêæå èñïîëüçîâàí
äëÿ ñâàðêè ïîêðûòûì ýëåêòðîäîì.
Ïîñòàâëÿþòñÿ ÷åòûðå âàðèàíòà ýòîãî èñòî÷íèêà ïèòàíèÿ:
S AristoMig 400 áåç áëîêà îõëàæäåíèÿ è àâòîòðàíñôîðìàòîðà
S AristoMig 400 ñ áëîêîì îõëàæäåíèÿ
S AristoMig 400 ñ àâòîòðàíñôîðìàòîðîì
S AristoMig 400 ñ áëîêîì îõëàæäåíèÿ è àâòîòðàíñôîðìàòîðîì
Ïðèìå÷àíèå:  íàñòîÿùåé èíñòðóêöèè îïèñàí èñòî÷íèê ïèòàíèÿ AristoMig 400
ñ áëîêîì îõëàæäåíèÿ è àâòîòðàíñôîðìàòîðîì.
Èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ ñ áëîêàìè ïîäà÷è
ïðîâîëîêè AristoFeed 30 èëè AristoFeed 48.
Àêñåññóàð² îò ä ëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 33.
2.1 Îáîðóäîâàíèå
Èñòî÷íèê ïèòàíèÿ AristoMig 400 ïîñòàâëÿåòñÿ â êîìïëåêòå ñ íàãðóçî÷íûì
ðåçèñòîðîì, 5 m îáðàòíîãî êàáåëÿ è Ðóêîâîäñòâîì ïî ýêñïëóàòàöèè.
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
AristoMig 400
áåç ïåðåêëþ÷åíèÿ
AristoMig 400
ñ ïåðåêëþ÷åíèåì
Íàïðÿæåíèå ñåòè ïèòàíèÿ 400/230/400/460/475/500/5
75 À, 10%, 3∼ 50/60 Ãö
208/230/400/460/475/500/5
75 À, 10%, 3∼ 50/60 Ãö
Ïåðâè÷íûé òîê
I
ìàêñ.
(MIG/MAG)
I
ìàêñ.
(MMA)
36 À
38 À
61/54/36/28/28/25/19 À
65/57/38/30/30/26/20 À
Ïîòðåáëÿåìàÿ ìîùíîñòü
õîëîñòîãî õîäà â ðåæèìå
ýíåðãîñáåðåæåíèÿ, 6,5 ìèí ïîñëå
ñâàðêè
60 Âò 235 Âò
Äèàïàçîí íàïðÿæåíèÿ/òîêà
MIG/MAG
MIG/MAG, M2
MMA
8-60 Â / 16-400 À
8-42 À
16-400 À
8-60 Â / 16-400 À
8-42 À
16-400 À
Äîïóñòèìàÿ íàãðóçêà ïðè
MIG/MAG
êîýôôèöèåíò íàãðóçêè 35%
êîýôôèöèåíò íàãðóçêè 60%
êîýôôèöèåíò íàãðóçêè 100%
400 À / 34 Â
320 À / 30 Â
250 À / 27 Â
400 À / 34 Â
320 À / 30 Â
250 À / 27 Â
Äîïóñòèìàÿ íàãðóçêà ïðè äóãîâîé
ñâàðêå âîëüôðàìîâûì ýëåêòðîäîì
MMA .
êîýôôèöèåíò íàãðóçêè 35%
êîýôôèöèåíò íàãðóçêè 60%
êîýôôèöèåíò íàãðóçêè 100%
400 À / 36 Â
320 À / 33 Â
250 À / 30 Â
400 À / 36 Â
320 À / 33 Â
250 À / 30 Â
RU
ba34d1ra -- 8 --
AristoMig 400
ñ ïåðåêëþ÷åíèåì
AristoMig 400
áåç ïåðåêëþ÷åíèÿ
Êîýôôèöèåíò ìîùíîñòè ïðè
ìàêñèìàëüíîì òîêå
0,65 0,65
Êïä ïðè ìàêñèìàëüíîì òîêå 85% 85%
Íàïðÿæåíèå õîëîñòîãî õîäà
MIG/MAG
MMA
55 -70 Â
78 -90 Â
55 -70 Â
78 -90 Â
Ðàáî÷àÿ òåìïåðàò óðà îò -10 äî +40˚C îò -10 äî +40˚C
Ãàáàðèòíûå ðàçìåðû, ÄxØxÂ
ñ áëîêîì îõëàæäåíèÿ
625 x 394 x 496 ìì
625 x 394 x 776 ìì
625 x 394 x 776 ìì
625 x 394 x 1056 ìì
Íåïðåðûâíî äåéñòâóþùåå
ñðåäíåå âçâåøåííîå çâóêîâîå
äàâëåíèå
<70 ä Á <70 ä Á
Ìàññà
ñ áëîêîì îõëàæäåíèÿ
57 êã
77 êã
114 ê ã
134 êã
Êëàññ èçîëÿöèè H H
Ê ëàññ çàùèòû êîðïóñà IP 23 IP 23
Êëàññ ïðèìåíåíèÿ
Áëîê îõëàæäåíèÿ
Ìîùíîñòü îõëàæäåíèÿ 2500 Âò ïðè ðàçíèöå òåìïåðàòóð 40˚Cè
ðàñõîäå 1, 5 ë/ìèí
Îõëàæäàþùàÿ æèäêîñòü 50% âîäà / 50% ãëèêîëü
Êîëè÷åñòâî îõëàæäàþùåé æèäêîñòè 5,5 ë
Ìàêñèìàëüíûé ðàñõîä âîäû 2ë/ìèí
Ìàêñèìàëüíîå êîëè÷åñòâî ñâàðî÷íûõ
ïèñòîëåòîâ / ãîðåëîê ñ âîäÿíûì
îõëàæäåíèåì, êîòîðîå ìîæåò áûòü
ïîäñîåäèíåíî
äâà ñâàðî÷íûõ ïèñòîëåòà MIG (äóãîâàÿ
ñâàðêà ïëàâÿùèìñÿ ìåòàëëè÷åñêèì
ýëåêòðîäîì â ñðåäå èíåðòíîãî ãàçà) èëè
îäíà ñâàðî÷íàÿ ãîðåëêà TIG (äóãîâàÿ ñâàðêà
âîëüôðàìîâûì ýëåêòðîäîì â ñðåäå
èíåðòíîãî ãàçà) è îäèí ñâàðî÷íûé ïèñòîëåò
MIG
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ (â %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Ðàáî÷èéöèêëóêàçàíäëÿòåìïåðàòóðû40˚C.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò. å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðî òîê îì.
RU
ba34d1ra -- 9 --
4ÓÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
Âíèìàíèå!
Ïðèñîåäèíèòü èñòî÷íèê ïèòàíèÿ ê ýëåêòðè÷åñêîé ñåòè ñ ïîëíûì ñîïðîòèâëåíèåì 0.200 Îì
èëè íèæå. Åñëè ïîëíîå ñîïðîòèâëåíèå ñåòè âûøå, âîçíèêàåò ðèñê ìèãàíèÿ îñâåòèòåëüíûõ
ïðèáîðîâ.
4.1 Èíñòðóêöèè ïî ïîäúåìó
Ñ èñòî÷íèêîì ïèòàíèÿ Ñ òåëåæêîé è èñòî÷íèêîì
ïèòàíèÿ
Ñòåëåæêîé2èèñòî÷íèêîì
ïèòàíèÿ
4.2 Ðàçìåùåíèå
Ðàçìåñòèòå ñâàðî÷íûé èñòî÷íèê ïèòàíèÿ òàêèì îáðàçîì, ÷òîáû åãî
âîçäóõîçàáîðíûå è âûïóñêíûå îòâåðñòèÿ íå áûëè çàãðàæäåíû.
RU
ba34d1ra -- 1 0 --
4.3 Ýëåêòðîìîíòàæ (ñ àâòîòðàíñôîðìàòîðîì)
RU
ba34d1ra -- 1 1 --
4.4 Ñåòü ýëåêòðîïèòàíèÿ
Óáåäèò åñü â òîì, ÷ò î áëîê ïîäêëþ÷åí ê ñåòè
ýëåêòðîïèòàíèÿ ñ òðåáóåìûì íàïðÿæåíèåì è çàùèùåí
ïðåäîõðàíèòåëÿìè òðåáóåìîãî íîìèíàëà. Íåîáõîäèìî
îáåñïå÷èòü çàùèòíîå çàçåìëåíèå â ñîî òâåòñòâèè ñ
äåéñòâóþùèìè íîðìàìè.
Ïàñïîðòíàÿ òàáëè÷êà ñ ïàðàìåòðàìè ñåòè ýëåêòðîïèòàíèÿ.
Ðåêîìåíäóåìûå íîìèíàëû ïðåäîõðàíèòåëåé è ìèíèìàëüíàÿ ïëîùàäü
ïîïåðå÷íîãî ñå÷åíèÿ êàáåëåé
AristoMig 400 60 Ãö 50/60
Ãö
50 Ãö 60 Ãö 60 Ãö 50 Ãö 60 Ãö
Íàïðÿæåíèå ñåòè
ïèòàíèÿ
208 Â 230 Â 400 Â 460 Â 475 Â 500 Â 575 Â
Ïëîùàäü
ïîïåðå÷íîãî ñå÷åíèÿ
ñèëîâîãî êàáåëÿ
ïèòàíèÿ, ìì
2
4G6 4G6 4G4 4G4 4G4 4G4 4G4
Ôàçíûé òîê, I
ñðåäíåêâàäðàòè÷íîå
äåéñòâóþùåå
çíà÷åíèå
38 À 33 À 22 À 18 À 18 À 16 À 11 À
Ïðåäîõðàíèòåëü
Óñòîé÷èâûé ê
ïåðåíàïðÿæåíèÿì
Òèï C, ìèíèàòþðíûé
âûêëþ÷àòåëü
50 À
50 À
50 À
50 À
25 À
32 À
20 À
--
20 À
--
16 À
--
16 À
--
Ïðèìå÷àíèå:
Ïðèâåäåííûå âûøå çíà÷åíèÿ ïëîùàäè ïîïåðå÷íîãî ñå÷åíèÿ ñèëîâûõ êàáåëåé è íîìèíàëû
ïðåäîõðàíèòåëåé ñîîòâåòñòâóþò øâåäñêèì íîðìàì. Îíè ìîãóò îêàçàòüñÿ íåïðèìåíèìû â
äðóãèõ ñòðàíàõ: óáåäèòåñü â òîì, ÷òî ïëîùàäü ïîïåðå÷íîãî ñå÷åíèÿ êàáåëåé è íîìèíàëû
ïðåäîõðàíèòåëåé ñîîòâåòñòâóþò ñîîòâåòñòâóþùèì íàöèîíàëüíûì íîðìàì.
4.5 Íàãðóçî÷íûé ðåçèñòîð
×òîáû èçáåæàòü âîçíèêíîâåíèÿ ïîìåõ, êîíöû øèíû
öåïè óïðàâëåíèÿ (CAN) äîëæíû áûòü ñíàáæåíû
íàãðóçî÷íûìè ðåçèñòîðàìè.
Îäèí êîíåö øèíû CAN ïîäêëþ÷åí ê ïàíåëè óïðàâëåíèÿ,
êîò îðàÿ ñíàáæåíà îáÿçàòåëüíûì íàãðóçî÷íûì ðåçèñòîðîì.
Äðóãîé êîíåö ïîäê ëþ÷åí ê èñòî÷íèêó ïèòàíèÿ è äîëæåí áûòü
ñíàáæ åí íàãðóçî÷íûì ðåçèñòîðîì, êàê ïîêàçàíî íà ðèñóíêå
ñïðàâà.
RU
ba34d1ra -- 1 2 --
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 5. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ
1 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû. Â äàííîé
ìîäåëè íå èñïîëüçóåòñÿ.
8 Áåëàÿ èíäèêàòîðíàÿ ëàìïà - Èñòî÷íèê
ïèòàíèÿ ÂÊË. (ON)
2 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû. Â äàííîé ìîäåëè
íå èñïîëüçóåòñÿ.
9 Îðàíæåâàÿ èíäèêàòîðíàÿ ëàìïà -
Ïåðåãðåâ
3 Çàëèâíîå î òâåðñòèå äëÿ îõëàæäàþùåé
âîäû
10 Ìèíèàòþðíûé âûêëþ÷àòåëü
4 Ñîåäèíèòåëü äëÿ êàáåëÿ ñâàðî÷íîãî
òîêà (+) (ñâàðêà MMA)
11 Ñîåäèíèòåëü äëÿ êàáåëÿ óïðàâëåíèÿ ê
áëîêó ïîäà÷è ïðîâîëîêè èëè
íàãðóçî÷íîìó ðåçèñòîðó
5 Ñîåäèíèòåëü ïóëüòà äèñòàíöèîííîãî
óïðàâëåíèÿ
12 Ñîåäèíèòåëü äëÿ êàáåëÿ ñâàðî÷íîãî
òîêà ê áëîêó ïîäà÷è ïðîâîëîêè
6 Ñîåäèíèòåëü îáðàòíîãî êàáåëÿ (-) 13 Ïîäêëþ÷åíèå îõëàæäàþùåé âîäû ê
áëîêó ïîäà÷è ïðîâîëîêè - ÃÎËÓÁÎÉ
7 Ñåòåâîé âûêëþ÷àòåëü, 0 / 1 / ÏÓÑÊ 14 Ñîåäèíèòåëü äëÿ ïîäà÷è
î õëàæäàþùåé âîäû îò áëîêà ïîäà÷è
ïðîâîëîêè - ÊÐÀÑÍÛÉ
5.2 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ
Âêëþ÷èòå ïèòàíèå, ïîâåðíóâ âûêëþ÷àòåëü (7) â ïîëîæåíèå START (ÏÓÑÊ).
Îòïóñòèòå âûêëþ÷àòåëü, è îí âåðíåòñÿ â ïîëîæåíèå ”1”.
Åñëè òðåáóåòñÿ âðåìåííî îòêëþ÷èòü ïèòàíèå â ïðîöåññå ñâàðêè, à çàòåì
âíîâü âêëþ÷èòü åãî, òî èñòî÷íèê ïèòàíèÿ áóäåò îñòàâàòüñÿ îáåñòî÷åííûì äî
òåõ ïîð, ïîêà âûêëþ÷àòåëü ñíîâà íå áóäåò âðó÷íóþ ïîâåðíóò â ïîëîæåíèå
ST ART (ÏÓ ÑÊ).
×òîáû âûêëþ÷èòü èñòî÷íèê ïèòàíèÿ, ïîâåðíèòå âûêëþ÷àòåëü â ïîëîæåíèå ”0”.
Åñëè èñòî÷íèê ïèòàíèÿ îòêëþ÷èòñÿ â ðåçóëüòàòå ñáîÿ ïî ïèòàíèþ èëè
îáû÷íîãî âûêëþ÷åíèÿ âðó÷íóþ, òî ïàðàìåòðû ñâàðêè áóäóò ñîõðàíåíû, òàê
÷òî èõ ìîæíî áó äåò èñïîëüçîâàòü ïðè ñëåäóþùåì âêëþ÷åíèè áëîêà.
RU
ba34d1ra -- 1 3 --
5.3 Óïðàâëåíèå âåíòèëÿòîðàìè
Âåíòèëÿòîðû èñòî÷íèêà ïèòàíèÿ ïðîäîëæàþò ðàáîòàòü â òå÷åíèå 6,5 ìèí
ïîñëå ïðåêðàùåíèÿ ñâàðêè, è áëîê ïåðåêëþ÷àåòñÿ â ðåæèì
ýíåðãîñáåðåæåíèÿ. Ïðè âîçîáíîâëåíèè ñâàðêè âåíòèëÿòîðû âíîâü íà÷íó ò
ðàáîòàòü.
Âåíòèëÿòîðû ðàáîòàþò íà ïîíèæåííûõ îáîðîòàõ ïðè ñâàðî÷íûõ òîêàõ äî 144 A
èíàïîëíûõîáîðîòàõïðèáîëüøèõòîêàõ.
5.4 Çàùèòà îò ïåðåãðåâà
Èñòî÷íèê ïèòàíèÿ èìååò äâà ðåëå çàùèòû îò òåïëîâîé ïåðåãðóçêè, êîòîðûå
ñðàáàòûâàþò ïðè íåäîïóñòèìîì âîçðàñòàíèè âíóòðåííåé òåìïåðàòóðû. Ïðè
ýòîì ïðåêðàùàåòñÿ ïîäà÷à ñâàðî÷íîãî òîêà è çàãîðàåòñÿ îðàíæåâàÿ
èíäèêàòîðíàÿ ëàìïà íà ëèöåâîé ïàíåëè áëîêà. Êîãäà òåìïåðàòóðà ñíèçèòñÿ,
ðåëå âíîâü àâòîìàòè÷åñêè âêëþ÷àòñÿ.
5.5 Áëîê îõëàæäåíèÿ
Ïîðÿäîê ðàáîòû ïðè ñâàðêå
×òîáû íà÷àòü ñâàðêó, ñâàðùèê íàæèìàåò ïóñêîâîé âûê ëþ÷àòåëü ñâàðî÷íîãî
ïèñòîëåòà. Èñòî÷íèê ïèòàíèÿ âêëþ÷àåò áëîê ïîäà÷è ïðîâîëîêè è íàñîñ
ïîäà÷è îõëàæäàþùåé âîäû.
×òîáû îñòàíîâèòü ïðîöåññ ñâàðêè, ñâàðùèê îòïóñêàåò ïóñêîâîé âûêëþ÷àòåëü
ñâàðî÷íîãî ïèñòîëåòà. Ïîäà÷à ñâàðî÷íîãî òîêà ïðåêðàùàåòñÿ, îäíàêî íàñîñ
ïîäà÷è îõëàæäàþù å é âîäû ïðîäîëæàåò ðàáîòàòü â ò å ÷åíèå 6,5 ìèí, ïîñëå
÷åãî áëîê ïåðåêëþ÷àå òñÿ â ðåæèì ýíåðãîñáåðå æåíèÿ.
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû îòêëþ÷àåò ñâàðî÷íûé òîê ïðè
îò ñóòñòâèè îõëàæäàþùåé æèäêîñòè è âûâîäèò ñîîáùåíèå îá îøèáêå íà
ïàíåëü óïðàâëåíèÿ. Ýòî çàùèòíîå óñòðîéñòâî ïîñòàâëÿåòñÿ êàê
äîïîëíèòåëüíàÿ ïðèíàäëåæíîñòü.
5.6 Ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ
Âåðñèÿ ïðîãðàììû â AristoPendant U8 äîëæíà áûòü 1.20 èëè âûøå. Äëÿ
íà äëåæàùåãî ôóíêöèîíèðîâàíèÿ äèñòàíöèîííîãî óïðàâëåíèÿ íà ìàøèíàõ
Aristo ñî âñòðîåííûìè ïàíåëÿìè óïðàâëåíèÿ äîëæíà áûòü óñòàíîâëåíà âåðñèÿ
ïðîãðàììíîãî îáåñïå÷åíèÿ 1.21 èëè âûøå.
Åñëè ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ ïîäêëþ÷åí, èñòî÷íèê ïèòàíèÿ è áëîê
ïîäà÷è ïðîâîëîêè íàõîäÿòñÿ â ðåæèìå äèñòàíöèîííîãî óïðàâëåíèÿ; êíîïêè è
ðó÷êè áëîêèðóþòñÿ. Ðåãóëèðîâêó âñåõ ôóíêöèé ìîæíî âûïîëíèòü òîëüêî ïðè
ïîìîùè ïóëüòà äèñòàíöèîííîãî óïðàâëåíèÿ.
Åñëè ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ íå èñïîëüçóåòñÿ, åãî âìåñòå ñ
à äàïòåðîì ñëåäóåò îòñîåäèíèòü îò èñòî÷íèêà ïèòàíèÿ è áëîêà ïîäà÷è
ïðîâîëîêè, êîòîðûå â ïðîòèâíîì ñëó÷àå áóäóò ïðîäîëæàòü ðàáîòàòü â ðåæèìå
äèñòàíöèîííîãî óïðàâëåíèÿ.
Ïîäðîáíûå ñâåäåíèÿ î ðàáîòå ïóëüòà äèñòàíöèîííîãî óïðàâëåíèÿ ïðèâåäåíû
â èíñòðóêöèÿõ ïî ýêñïëóàòàöèè ïàíåëè óïðàâëåíèÿ.
RU
ba34d1ra -- 1 4 --
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêî å îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.
Ïîäêëþ÷åíèå, îáñëóæèâàíèå è ðåìîíò ñâàðî÷íîãî îáîðóäîâàíèå, ñâÿçàííûå
ñî ñíÿòèåì çàùèòíûõ ùèòêîâ, âûïîëíÿþòñÿ ëèöàìè, ïðîøåäøèìè
ñîîòâåòñòâóþùóþ ýëåêòðîòåõíè÷åñêóþ ïîäãîòîâêó è àòòåñòîâàííûìè íà ïðàâî
âûïîëíåíèÿ òà êèõ ðàáîò.
Ïðèìå÷àíèå:
à àðàíòìèéíûå îáÿçàòåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïðîèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
6.1 Î÷èñòêà âîçäóøíîãî ôèëüòðà
S Ðàçáëîêèðóéòå âåðõíþþ êðûøêó ñ
ïûëåóëàâëèâàþùèì ôèëüòðîì
(1).
S Îòêèíüòå âåðõíþþ êðûøêó (2).
S Èçâëåêèòå ïûëåóëàâëèâàþùèé ôèëüòð (3).
S Ïðîäóéòå åãî íà÷èñò î ñæàòûì
âîçäóõîì íèçêîãî äàâëåíèÿ.
S Óñòàíîâèòå ôèëüòð íà ìåñòî,
ïîâåðíóâ åãî ñåòêîé ñ áîëåå
ìåëêèìè ÿ÷åéêàìè ê âåðõíåé êðûøêå (2).
S Çàêðîéòåâåðõíþþêðûøêóâìåñòåñ
ôèëüòðîì.
6.2 Ïîïîëíåíèå îõëàæäàþùåé æèäêîñòè
Ðåêîìåíäóå òñÿ èñïîëüçîâà òü ñìåñü èç 50% âîäû è 50%
ýòèëåíãëèêîëÿ.
Äîëèâàéòå êàæäûé è ç êîìïîíåíòîâ, ïîêà óðîâåíü
îõëàæäàþùåé æèäêîñòè íå äîñòèãíåò çàëèâíîãî
îòâåðñòèÿ.
RU
ba34d1ra -- 1 5 --
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ
Ïðåæäå ÷åì âûçûâàòü àòòåñòîâàííîãî ñïåöèàëèñòà ïî îáñëóæèâàíèþ,
ïîïðîáóéòå ñàìîñòîÿòåëüíî âûïîëíèòü ðåêîìåíäóåìûå íèæå ïðîâåðêè.
Òèï íåèñïðàâíîñòè Äåéñòâèÿ:
Îòñóòñòâèå äóãè S Ïðîâåðüòå, âêëþ÷åí ëè âûêëþ÷àòåëü ïèòàíèÿ.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ êàáåëåé
ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà òîêà.
S Ïðîâåðüòå, íå îòêëþ÷åí ëè ìèíèàòþðíûé âûêëþ÷àòåëü.
×àñòî ñðàáàòûâàþò ðåëå
çàùèòû îò òåïëîâîé
ïåðåãðóçêè.
S Ïðîâåðüòå, íå ñðàáîòàëè ëè ðåëå çàùèòû îò òåïëîâîé
ïåðåãðóçêè (ñðàáàòûâàíèå ðåëå îïðåäåëÿåòñÿ ïî
çàãîðàíèþ îðàíæåâîé ëàìïû íà ëèöåâîé ïàíåëè).
S Ïðîâåðüòå ñåòåâûå ïðåäîõðàíèòåëè.
×àñòî ñðàáàòûâàþò ðåëå
çàùèòû îò òåïëîâîé
ïåðåãðóçêè.
S Ïðîâåðüòå, íå çàñîðåíû ëè âîçäóøíûå ôèëüòðû.
S Óá åäèòåñü â òîì, ÷òî íå ïðåâûøåíû íîìèíàëüíûå
çíà÷åíèÿ ïàðàìåòðîâ èñòî÷íèêà ïèòàíèÿ (ò. å. ÷òî
óñòðîéñòâî ðàáîòàåò áåç ïåðåãðóçêè).
Íèçêàÿ ýôôåêòèâíîñòü
ñâàðêè.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ êàáåëåé
ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà òîêà.
S Óáåäèòåñü â òîì, ÷òî èñïîëüçóþòñÿ ýëåêò ðîäû
òðåáóåìîãî òèïà.
S Ïðîâåðüòå ñåòåâûå ïðåäîõðàíèòåëè.
8 ÈÍÔÎÐÌÀÖÈß ÄËß ÇÀÊÀÇÀ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ì îíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùåííûå ôèðìîé
ESAB.
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
RU
ENGLISH
-- 1 6 --
TOCe
1 DIRECTIVE 17........................................................
2SAFETY 17...........................................................
3 INTRODUCTION 19...................................................
3.1 Equipment 19................................................................
4 TECHNICAL DATA 19.................................................
5 INSTALLATION 20....................................................
5.1 Lifting instructions 21.........................................................
5.2 Placing 21...................................................................
5.3 Electrical installation (with autotransformer) 22...................................
5.4 Mains power supply 23........................................................
5.5 Terminating resistor 23........................................................
6 OPERATION 24.......................................................
6.1 Connections and control devices 24............................................
6.2 Turning on the power source 24................................................
6.3 Fan control 25...............................................................
6.4 Overheating protection 25.....................................................
6.5 Cooling unit 25...............................................................
6.6 Remote control unit 25........................................................
7 MAINTENANCE 26....................................................
7.1 Cleaning the air filter 26.......................................................
7.2 Topping up the coolant 26.....................................................
8 FAULT TRACING 27...................................................
9 ORDERING OF SPARE PARTS 27......................................
DIAGRAM 28............................................................
ORDERING NUMBER 31.................................................
SPARE PARTS LIST 32...................................................
ACCESSORIES 33.......................................................
-- 1 7 --
ba34d0ea
1DIRECTIVE
DECLARATION OF CONFORMITY
ESAB We lding Equipment AB, S--695 81 Laxå, Sweden, gives its unreserved guarantee that welding
power source AristoMig/LAU 400 from serial number 050 complies with standard IEC/EN 60974--1, in
accordance with the requirements of directive (73/23/EEC) and addendum (93/68/EEC) and with
standard EN 50199 in accordance with the requirements of directive (89/336/EEC) and addendum
(93/68/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Joakim Cahlin
Vice President
ESAB Welding Equipment AB
695 81 LAXÅ
SWEDEN Tel: + 46 584 81000 Fax: + 46 584 411924
Laxå 2001
2SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorized person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from drafts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
GB
-- 1 8 --
ba34d1ea
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is safe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect y our eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect y our ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide you with all necessary welding protectio n and accessories.
WARNING!
Read and understand the instruction manual before installing
or operating.
Do not use the power source for thawing frozen pipes.
WARNING!
This product is solely intended for arc welding.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on W aste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human health!
GB
-- 1 9 --
ba34d1ea
3 INTRODUCTION
The AristoMig 400 is a MIG/MAG welding power source, which can a lso be used for
MMA welding.
There are four variants of the power source:
S AristoMig 400 without cooling unit or autotransformer
S AristoMig 400 with cooling unit
S AristoMig 400 with autotransformer
S AristoMig 400 with cooling unit and autotransformer
NB: These instructions describe an AristoMig 400 with cooling unit and
autotransformer.
The power source is intended for use with the AristoFeed 30 or AristoFeed 48 wire
feed units.
ESAB’s accessories for the product can be found on page 33.
3.1 Equipment
The AristoMig 400 power source is supplied complete with terminating resistor,
5m return cable and instruction manual.
4 TECHNICAL DATA
AristoMig 400
not reconnectable
AristoMig 400
reconnectable
Mains voltage 400V, ±10%, 3∼ 50 Hz 208/230/400/460/475/500/
575 V, ±10%, 3∼ 50/60 Hz
Primary current
I
max
MIG/MAG
I
max
MMA
36 A
38 A
61/54/36/28/28/25/19 A
65/57/38/30/30/26/20 A
No--load power demand when in the
energy--saving mode, 6.5 min. after
welding
60 W 235 W
Voltage/current range
MIG/MAG
MIG/MAG, M2
MMA
8-- 60 V / 16--400 A
8-- 42 A
16-- 400 A
8-- 60 V / 16--400 A
8-- 42 A
16 -- 400 A
Permissible load at MIG/MAG
35% duty cycle
60 % duty cycle
100% duty cycle
400 A / 34 V
320 A / 30 V
250 A / 27 V
400 A / 34 V
320 A / 30 V
250 A / 27 V
Permissible load at MMA
35% duty cycle
60 % duty cycle
100% duty cycle
400 A / 36 V
320 A / 33 V
250 A / 30 V
400 A / 36 V
320 A / 33 V
250 A / 30 V
Power factor at maximum current 0.65 0.65
Efficiency at maximum current 85 % 85 %
Open --circuit voltage
MIG/MAG
MMA
55 -- 70 V
78 -- 90 V
55 -- 70 V
78 -- 90 V
GB
-- 2 0 --
ba34d1ea
Operating temperature -- 1 0 t o + 4 0 ˚C -- 1 0 t o + 4 0 ˚C
Dimensions, lxbxh
with cooling unit
625 x 394 x 496 mm
625 x 394 x 776 mm
625 x 394 x 776 mm
625 x 394 x 1056 mm
Continual A--weighted sound pres-
sure
<70 db <70 db
Weight
with cooling unit
57 kg
77 kg
114 kg
134 kg
Insulation class H H
Enclosure class IP 23 IP 23
Application class
Cooling unit
Cooling power 2500 W at 40˚C temp. differencen and flow
1,5l/min
Coolant 50 % water / 50% glycol
Coolant quantity 5.5 l
Maximum water flow 2.0 l/min
Maximum number of water--cooled welding
guns/torches that may be connected
two MIG welding guns or
one TIG torch and one MIG welding gun
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
The duty cycle is valid for 40˚C.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
5 I NSTALLATION
The installatio n must be executed by a professional.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’ s responsibility to take adequate precautions.
Note!
Connect the power source to the electricity mains with a network impedance of 0.200 ohm or lower. If the
network impedance is higher, there is a risk of flicker in the illuminators.
GB
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
ESAB AristoMig 400 Manuale utente
- Categoria
- Sistema di saldatura
- Tipo
- Manuale utente
- Questo manuale è adatto anche per
in altre lingue
- English: ESAB AristoMig 400 User manual
Documenti correlati
-
ESAB AristoMig 500 Manuale utente
-
ESAB Aristo®Mig U500 Manuale utente
-
ESAB Mig 4000i Manuale utente
-
ESAB Aristo®Mig U400 Manuale utente
-
ESAB AristoMig 320 Manuale utente
-
-
-
ESAB Mig U4000i Manuale utente
-
ESAB Mig U5000i Manuale utente
-