Nikon NIKKOR Z 58mm f/0.95 S Noct Manuale utente

1

NIKKOR Z 58mm f/0.95 S Noct

En

User’s Manual (with Warranty)

De

Benutzerhandbuch (inkl. Garantiebeleg)

Fr

Manuel d’utilisation (avec garantie)

Nl

Gebruikshandleiding (met garantie)

It

Manuale d’uso (con garanzia)

Es

Manual del usuario (con garantía)

Pt

Manual do Utilizador (com Garantia)

Pl

Instrukcja obsługi (wraz z gwarancją)

Hu

Használati útmutató (jótállási jeggyel)

Gr

Εγχειρίδιο οδηγιών χρήσης (με Εγγύηση)

Ro

Manualul utilizatorului (cu garanţie)

2

3

En

A

Care and Handling

The lens is a high-precision optical instrument. To ensure contin-

ued performance, avoid subjecting the product to physical shocks

during handling.

Before using this product, please read these instructions carefully. You

will also need to consult the camera manual.

• This lens is intended exclusively for use with mirrorless cameras featuring

a Nikon Z mount.

• This is a manual focus lens. Regardless of the focus mode selected

with the camera, focus must be adjusted manually while this lens is

attached.

Opening the Trunk Case

To open the trunk case:

z Place the trunk case on a

stable surface.

x Release the latch safety locks

(

q

) and open the latches

(

w

).

c Open the lid (

e

).

• Open the lid slowly.

• Take care that your ﬁ ngers

don’t get caught in the

case’s moving parts.

• The lid and body of the case

form a tight seal, and it may

sometimes be necessary to

grip the body securely while

opening the lid.

4

En

For Your Safety

To prevent damage to property or injury to yourself or to others, read

“For Your Safety” in its entirety before using this product.

Keep these safety instructions where all those who use this product

will read them.

A WARNING: Failure to observe the precautions marked with this

icon could result in death or severe injury.

A CAUTION: Failure to observe the precautions marked with this

icon could result in injury or property damage.

A

WARNING

•

Do not disassemble or modify this product.

Do not touch internal parts that become exposed as the result

of a fall or other accident.

Failure to observe these precautions could result in electric shock or

other injury.

•

Should you notice any abnormalities such as the product

producing smoke, heat, or unusual odors, immediately

disconnect the camera power source.

Continued operation could result in ﬁ re, burns or other injury.

•

Keep dry.

Do not handle with wet hands.

Failure to observe these precautions could result in ﬁ re or electric shock.

•

Do not use this product in the presence of ﬂ ammable dust or

gas such as propane, gasoline or aerosols.

Failure to observe this precaution could result in explosion or ﬁ re.

•

Do not directly view the sun or other bright light source through the lens.

Failure to observe this precaution could result in visual impairment.

•

Keep this product out of reach of children.

Failure to observe this precaution could result in injury or product

malfunction. In addition, note that small parts constitute a choking

hazard. Should a child swallow any part of this product, seek

immediate medical attention.

5

En

A

WARNING

•

Do not handle with bare hands in locations exposed to

extremely high or low temperatures.

Failure to observe this precaution could result in burns or frostbite.

A

CAUTION

•

Do not leave the lens pointed at the sun or other strong light sources.

Light focused by the lens could cause ﬁ re or damage to product’s

internal parts. When shooting backlit subjects, keep the sun well out

of the frame.

•

Do not leave the product where it will be exposed to extremely

high temperatures, for an extended period such as in an

enclosed automobile or in direct sunlight.

Failure to observe this precaution could result in ﬁ re or product malfunction.

•

Do not transport cameras or lenses with tripods or similar

accessories attached.

Failure to observe this precaution could result in injury or product

malfunction.

Notices for Customers in Europe

This symbol indicates that electrical and electronic equip-

ment is to be collected separately.

The following apply only to users in European countries:

• This product is designated for separate collection at an ap-

propriate collection point. Do not dispose of as household

waste.

• Separate collection and recycling helps conserve natural resources

and prevent negative consequences for human health and the envi-

ronment that might result from incorrect disposal.

• For more information, contact the retailer or the local authorities in

charge of waste management.

6

En

Using the Lens

Parts of the Lens: Names and Functions

See below for the names and functions of the parts of the lens.

7

En

q

Focus ring Rotate to focus manually. —

w

Focus distance

indicator

Check the focus distance (the ap-

proximate distance between the

image sensor and the subject).

• Note that the focus distance

indicator is intended only as a

guide and may not accurately

reﬂ ect the distance to the sub-

ject. Due to depth of ﬁ eld or

other factors, a focus distance

of ∞ may not be selected when

the camera is focused on a dis-

tant object.

—

e

Focus distance

mark

r

Lens info panel

View focus distance, depth of

ﬁ eld, and other information.

See

B

(011),

C

(012)

t

Lens rotation

index

Use when rotating the camera

from landscape to portrait orien-

tation or vice versa.

See

D

(014)

y

Tripod collar

rotation index

u

Control ring

Rotate to adjust a setting such as

Aperture or Exposure compensation

assigned using the camera. For

more information, see the de-

scription of Custom control assign-

ment in the camera manual.

—

i

Lens mounting

mark

Use when mounting the lens on

the camera.

See

A

(010)

o

Rubber lens-

mount gasket

——

!0

CPU contacts

Used to transfer data to and from

the camera.

—

8

En

9

En

!1

L-Fn button

Press to perform a function as-

signed using the camera. For

more information, see the de-

scription of Custom control assign-

ment in the camera manual.

—

!2

Display button

Save settings or choose the in-

formation shown in the lens info

panel.

See

B

(011),

C

(012)

!3

Tripod collar

ring

——

!4

Lens rotation

index (90°)

Use when rotating the camera

from landscape to portrait orien-

tation or vice versa.

See

D

(014)

!5

Tripod collar

rotation index

(90°)

!6

Tripod collar

ring attach-

ment screw

!7

Built-in

rotating tripod

collar

Use when the camera is mount-

ed on a tripod.

!8

Security slot

(for anti-theft

cable)

Third-party anti-theft cables can

be attached to this slot. For more

information, see the documen-

tation provided with the cable.

—

!9

Lens hood

Lens hoods block stray light that

would otherwise cause ﬂ are or

ghosting. They also serve to pro-

tect the lens.

See

E

(015)

@0

Front lens cap — —

@1

Rear lens cap — —

10

En

A

Attachment and Removal

Attaching the Lens

z

Turn the camera oﬀ , remove the body cap, and detach the rear

lens cap.

x

Position the lens on the camera body, keeping the mount-

ing mark on the lens aligned with the mounting mark on

the camera body, and then rotate the lens counterclockwise

until it clicks into place.

• We recommend attaching the lens hood to protect the lens dur-

ing use.

Removing the Lens

z

Turn the camera oﬀ .

x

Press and hold the lens release button while turning the lens

clockwise.

11

En

B

The Lens Info Panel

The lens info panel lights when the

lens is attached to a camera and the

camera is on.

Press the display button to cycle the display as

shown

:

Display

button

Depth of  eld

Aperture *

Focus distance

* Aperture is displayed only when the

camera is in mode A or M. The display

for other modes is shown in the illustra-

tion.

• The panel turns oﬀ automatically when the camera standby timer

expires or if no lens operations are performed for about 10 sec-

onds. Press the display button to reactivate the display.

A

The Lens Info Panel

The focus distance, depth of  eld, and other information displayed in the lens info

panel are approximations only.

A

Irregular Bokeh

With fast shutter speeds and/or wide apertures, you may notice irregularities in how bokeh is

shaped. The e ect can be mitigated by choosing slower shutter speeds and/or higher f-numbers.

12

En

C

Panel Options

Follow the steps below to choose the units for focus distance from

meters (m) or feet (ft) or adjust the brightness of the lens info panel.

z

Press and hold the display button to view settings.

• Unit or brightness selection options will be displayed. The

currently selected item will ﬂ ash.

• Press the display button to toggle between displays.

Units Brightness

x

Choose a setting using the lens control ring.

Units

- Rotate the control ring to

choose from meters (m) or

feet (ft).

Brightness

- Rotate the control ring in the

“+” (brighter) or “−” (darker)

direction.

- Choose from 6 levels of

brightness.

13

En

- To turn the lens info panel

oﬀ , rotate the ring in the “−”

direction until the icon

changes to .

• Press the display button to save changes and toggle the dis-

play.

• If no operations are performed using lens controls for about 5

seconds, panel options will clear from the display and chang-

es will be canceled.

c

Press and hold the display button to return to the lens infor-

mation display.

• Choosing for brightness turns the lens info panel oﬀ . To

turn the display on again, press and hold the display button.

14

En

D

The Built-in Rotating Tripod Collar

• Attach tripods to the built-in rotating tripod collar, not to the camera.

• Attaching tripods to the built-in rotating tripod collar rather than

to the camera allows the camera to be rotated as described below

while a tripod is attached.

z Loosen the tripod collar ring at-

tachment screw (

q

).

x Rotate the camera (

w

) to align

the lens rotation index with the

tripod collar rotation index that

matches the desired orientation

(landscape or portrait).

• When rotating the camera, care

may be needed to prevent the

hand holding the camera con-

tacting the tripod.

15

En

c Tighten the tripod collar ring at-

tachment screw (

e

).

• For information on removing the built-in rotating tripod collar,

contact a Nikon-authorized service representative.

E

Attaching and Removing the Lens Hood

The lens hood screws directly into the threads in front of the lens. Do not

touch the glass surface of the lens or use excessive force.

• To remove the hood, unscrew it from the lens.

16

En

Placing the Lens in Its Case

Follow the steps below to place the lens in its case.

z

Rotate the focus ring to the position shown.

• The lens cannot be placed in the case while extended.

x Conﬁ rm that the front and rear lens caps are attached.

c Remove the lens hood.

v Place the lens and hood in the case as shown.

• Reverse the steps in “Opening the Trunk Case” (03) to close

and latch the lid. Be sure the safety locks are engaged.

Hood compartment

Lens compartment

Accessory com-

partment*

* Items placed in the accessory compartment are not covered under

warranty.

17

En

Precautions for Use

• Be sure to support the lens when holding the camera. Failure to ob-

serve this precaution could damage the camera lens mount.

• Do not pick up or hold the lens by its telescoping section.

• Do not pick up or hold the lens or camera using only the lens hood.

• Keep the CPU contacts clean.

• When using a tripod with a large pan head, be

careful when rotating the focus ring to avoid

injury caused by your ﬁ ngers getting caught

between the ring and the pan head.

• Should the rubber lens-mount gasket be damaged, cease use immedi-

ately and take the lens to a Nikon-authorized service center for repair.

• Replace the front and rear lens caps when the lens is not in use.

• To protect the interior of the lens, store it out of direct sunlight.

• Do not leave the lens in humid locations or in locations in which it may

be exposed to moisture. Rusting of the internal mechanism can cause

irreparable damage.

• Do not leave the lens next to open ﬂ ames or in other extremely hot

locations. Extreme heat could damage or warp exterior parts made

from reinforced plastic.

• Rapid changes in temperature may cause damaging condensation in-

side and outside the lens. Before taking the lens from a warm to a cold

environment or vice versa, place it in a bag or plastic case to slow the

change in temperature.

• Remove the lens from the camera and place it in the supplied case

for transport.

18

En

Lens Care

• Removing dust is normally suﬃ cient to clean the glass surfaces of the lens.

• The  uorine-coated front lens element can be cleaned as described below.

- Smudges, ﬁ ngerprints, and other oily stains can be removed using a

soft, clean cotton cloth or lens cleaning tissue; clean from the center

outwards using a circular motion.

- To remove stubborn stains, wipe gently using a soft cloth lightly

dampened with a small amount of distilled water, ethanol, or lens

cleaner.

- Any drop-shaped marks left from this process on the water- and oil-

repellent surface can subsequently be removed with a dry cloth.

• When cleaning the rear lens element, which is not  uorine-coated, remove

smudges, ﬁ ngerprints, and other oily stains using a soft, clean cotton

cloth or lens cleaning tissue lightly dampened with a small amount

of ethanol or lens cleaner. Wipe gently from the center outwards in a

circular motion, taking care not to leave smears or touch the lens with

your ﬁ ngers.

• Never use organic solvents such as paint thinner or benzene to clean

the lens.

• Neutral Color (NC) ﬁ lters (available separately) and the like can be used

to protect the front lens element. Remove the lens hood before at-

taching or removing ﬁ lters.

• If the lens will not be used for an extended period, store it in a cool,

dry location to prevent mold and rust. Do not store in direct sunlight

or with naphtha or camphor moth balls.

19

En

Accessories

Supplied Accessories

• LC-82B 82 mm snap-on Front Lens Cap

• LF-N1 Rear Lens Cap

• HN-38 Screw-on Lens Hood

• CT-101 Trunk Case

D

Using the Trunk Case

• Nikon assumes no liability in the event that damage to the case results in damage to its

contents.

• When storing the trunk case, close the

latch safety locks. Con rm that the latches

are securely closed as shown in the illus-

tration.

• Do not leave the case for long periods in humid locations or in direct sunlight. Prolonged

exposure to damp or direct sunlight could cause the inner padding to harden or fade.

• Do not store the case in locations exposed to extreme temperatures. Failure to observe this

precaution could cause the inner padding to warp, shrink, or peel.

• Avoid directly touching the case after it has been exposed to extreme temperatures. Failure

to observe this precaution could result in burns, low-temperature burns, or frostbite.

• Do not sit or place heavy objects on the case.

• Keep the case and its accessories out of reach of small children.

• Keep your hands clear of moving parts when opening or closing the case.

• Do not leave the case in unstable locations or locations where it is likely to fall.

• Never use organic solvents such as alcohol, benzine, or thinner to clean the case.

• Do not scratch or rub the surface of the case with hard objects.

• Do not attempt to disassemble, repair, or modify the case.

• The pressure equalization valve does not rotate. Applying ex-

cessive force to the valve could cause injury or damage the

product.

• Do not drop the case, handle it with excessive force, or sub-

ject it to violent physical shocks or vibration.

• Nikon will not make repairs to the trunk case.

Pressure equaliza-

tion valve

20

En

Speci cations

NIKKOR Z 58mm f/0.95 S Noct

Mount

Mount Nikon Z mount

Focal length

Focal length 58 mm

Maximum aperture

Maximum aperture f/0.95

Lens construction

Lens construction 17 elements in 10 groups (including 4 ED elements,

3 aspherical elements, and elements with Nano Crystal and

ARNEO coats, and a  uorine-coated front lens element)

Angle of view

Angle of view • FX format: 40°50c

• DX format: 27°20c

Focusing system

Focusing system Front focusing system

Minimum focus

distance

0.5 m (1.64 ft) from focal plane

Maximum reproduc-

tion ratio

0.19×

Diaphragm blades

Diaphragm blades 11 (rounded diaphragm opening)

Aperture range

Aperture range f/0.95 – 16

Filter-attachment size

Filter-attachment size 82 mm (P = 0.75 mm)

Dimensions

Dimensions Approx. 102 mm/4.1 in. maximum diam-

eter × 153 mm/6.1 in.

(distance from camera lens mount  ange)

Weight

Weight Approx. 2000 g (4 lb 6.6 oz)

La pagina sta caricando ...

Nikon NIKKOR Z 58mm f/0.95 S Noct Manuale utente

Nikon NIKKOR Z 58mm f/0.95 S Noct Manuale utente

in altre lingue

Documenti correlati

Altri documenti