PLAY / PAUSE BUTTON
Press once to start playing the CD.
The DISPLAY will show the playing track no. Press once again to stop playing temporarily and the track no.
will be flash. Press once again to resume playing and the track no. will stop flashing.
STOP BUTTON
Press once to stop playing the CD. Then the total no. of track of the CD will be shown in the DISPLAY.
NEXT SKIP / SEARCH FORWARD BUTTON
When playing a CD, press once to skip to next track. Press and hold to search for a desired position at high
speed forward. Release the button to resume normal play.
BACK SKIP / SEARCH BACKWARD BUTTON
Press once to skip back to the beginning of the current playing track. Press repeatedly to go to previous
tracks. Press and hold to search for a desired position at high speed in reverse. Release the button to
resume normal play.
MODE BUTTON
- Press once for single track repeat playing and this symbol " " will appear in the DISPLAY.
- Press twice for all tracks repeat playing and this symbol " " will appear in the DISPLAY.
- Press three times for random playing and "RAND." will appear in the DISPLAY.
The number of songs will be played in a random sequence until all the songs are played once and
then it will stop playing.
To return to the normal play, press the MODE BUTTON until all the above indicators disappear.
To turn off the CD, press the STOP button twice.
CD PROGRAM PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up to 24 tracks can be
programmed.
1. Press once the PROGRAM BUTTON. " PROG." will flash in the DISPLAY.
2. Press the "BACK SKIP / SEARCH BACKWARD" and / or "NEXT SKIP / SEARCH FORWARD"
BUTTON to select the desired track number.
3. Press once the PROGRAM BUTTON again to memorize the track.
4. Repeat steps 2 and 3 until all desired tracks are programmed.
5. Press the PLAY / PAUSE BUTTON to start playing. " PROG. " will appear in the DISPLAY.
6. Press the STOP BUTTON to stop programmed playback.
7. Press the PROGRAM BUTTON and then PLAY / PAUSE BUTTONS to resume programmed
playback.
8. Press the PROGRAM then STOP button to clear the programmed memory, or open the CD DOOR
or power off the unit to clear the programmed memory.
NOTE : Programming can only be made when CD playing is in stop mode.
RADIO OPERATION
1. Set the FUNCTION SWITCH to RADIO position. Set the desired radio band with the AM/FM BAND
SWITCH.
2. Tune in a desired station by turning the TUNING KNOB.
3. Adjust the VOLUME KNOB to your desired listening level.
4. To turn off the radio, set the FUNCTION SWITCH to the CD position.
DBBS
When the DBBS ON/OFF BUTTON is set to the ON position, the dynamic low frequency ranges are
boosted.
JWIN JXM85 (English)-1.p65 2003/12/20, ¤U¤È 12:545