LG 24TL510S-W Manuale del proprietario

www.lg.com

28TK420S 24TL520S

28TL520S

24TL510S

28TL510S

Safety and Reference

OWNER’S MANUAL

LED TV*

*LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your TV and retain it for future

reference.

ENG

ENGLISH

2

Table of contents

Licenses -------------------------------------------3

Open source software notice

information --------------------------------------3

Preparing -----------------------------------------3

Lifting and moving the TV ------------------- 4

Setting up the TV ------------------------------- 4

Using the button -------------------------------5

Mounting on a table ---------------------------6

Mounting on a wall ----------------------------7

Connections (notications) -----------------8

Remote control ---------------------------------9

Maintenance ----------------------------------- 11

Troubleshooting------------------------------ 11

Specications --------------------------------- 12

ENGENGLISH

3

Licenses

Supported licenses may dier by model. For more information about

licenses, visit www.lg.com.

Open source software

notice information

To obtain the source code under GPL, LGPL, MPL, and other open

source licenses, that is contained in this product, please visit

http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty

disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM

for a charge covering the cost of performing such distribution (such

as the cost of media, shipping, and handling) upon email request to

opensourc[email protected].

This oer is valid for a period of three years after our last shipment of

this product. This oer is valid to anyone in receipt of this information.

Preparing

NOTE

y Image shown may dier from your TV.

y Your TV’s OSD (On Screen Display) may dier slightly from that

shown in this manual.

y The available menus and options may dier from the input source or

product model that you are using.

y New features may be added to this TV in the future.

y The TV can be placed in standby mode in order to reduce the power

consumption. And the TV should be turned o if it will not be

watched for some time, as this will reduce energy consumption.

y The energy consumed during use can be signicantly reduced if the

level of brightness of the picture is reduced, and this will reduce the

overall running cost.

y The items supplied with your product may vary depending on the

model.

y Product specications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

y For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not t into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

y Use a certied cable with the HDMI logo attached. If you do not use

a certied HDMI cable, the screen may not display or a connection

error may occur.

y Recommended HDMI cable types

- High-Speed HDMI®/™ cable

- High-Speed HDMI®/™ cable with Ethernet

CAUTION

y Do not use any unapproved items to ensure the safety and product

life span.

y Any damage or injuries caused by using unapproved items are not

covered by the warranty.

ENG

ENGLISH

4

Lifting and moving the TV

Please note the following advice to prevent the TV from being

scratched or damaged and for safe transportation regardless of its

type and size.

y It is recommended to move the TV in the box or packing material

that the TV originally came in.

y Before moving or lifting the TV, disconnect the power cord and all

cables.

y When holding the TV, the screen should face away from you to avoid

damage.

y Hold the top and bottom of the TV frame rmly. Make sure not to

hold the transparent part, speaker, or speaker grill area.

y When transporting the TV, do not expose the TV to jolts or excessive

vibration.

y When transporting the TV, keep the TV upright, never turn the TV on

its side or tilt towards the left or right.

y Do not apply excessive pressure to cause exing/bending of frame

chassis as it may damage screen.

CAUTION

y Avoid touching the screen at all times, as this may result in damage

to the screen.

y When handling the TV, be careful not to damage the protruding

joystick button. (Depending on model)

Setting up the TV

CAUTION

y When attaching the stand to the TV set, place the screen facing

down on a cushioned table or at surface to protect the screen from

scratches.

y Do not carry the TV upside-down by holding the stand body (or

stand base) as this may cause it to fall o, resulting in damage or

injury.

y Do not apply foreign substances (oils, lubricants, etc.) to the screw

parts when assembling the product. (Doing so may damage the

product.)

NOTE

y Remove the stand before installing the TV on a wall mount by

performing the stand attachment in reverse. (Only TK420S/TL520S)

y Lift up the latch at the bottom of the stand base and detach the

stand base from the TV. (Only TL510S)

ENGENGLISH

5

Using the button

You can simply operate the TV functions, using the button.

(Depending on model)

y Image shown may dier from your TV.

Basic functions

Power On (Press)

Power O (Press and hold

1

)

Volume Control

Programmes Control

1 If the menu button is on the screen, pressing and holding the

button will let you exit the menu.

NOTE

y If you press the joystick button rst, you may not be able to adjust

the volume level and saved programmes.

CAUTION

y With your nger on the joystick button, when moving it up, down,

left or right be careful not to press the button in.

Power On (Press)

Power O

1

(Press and hold)

Menu Control (Press

2

)

Menu Selection (Press and Hold

3

)

1 All running apps will close, and any recording in progress will

stop.

2 You can access and adjust the menu by pressing the button when

TV is on.

3 You can use the function when you access menu control.

Adjusting the menu

When the TV is turned on, press the button one time. You can adjust

the menu items using the buttons. (Depending on model)

Turns the power o.

Accesses the setting menu.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

Scrolls through the saved programmes.

Adjusts the volume level.

ENG

ENGLISH

6

Using the kensington security system

(This is not available for all models.)

y Image shown may dier from your TV.

The Kensington security system connector is located at the rear of the

TV. For more information of installation and using, refer to the manual

provided with the Kensington security system or

visit http://www.kensington.com. Connect the Kensington security

system cable between the TV and a table.

NOTE

y The Kensington security system is optional. You can obtain

additional accessories from most electronics stores.

Mounting on a table

y Image shown may dier from your TV.

1 Lift and tilt the TV into its upright position on a table.

- Leave a 100 mm (minimum) space from the wall for proper

ventilation.

100 mm

2 Connect the AC-DC Adapter and power cord to a wall outlet.

CAUTION

y Do not place the TV near or on sources of heat, as this may result in

re or other damage.

y Please be sure to connect the TV to the AC/DC power adapter before

connecting the TV’s power plug to a wall power outlet.

ENGENGLISH

7

Mounting on a wall

For proper ventilation, allow a clearance of 100 mm on each side and

from the wall. Detailed installation instructions are available from your

dealer, see the optional Tilt Wall Mounting Bracket Installation and

Setup Guide.

100 mm

If you intend to mount the TV to a wall, attach Wall mounting interface

(optional parts) to the back of the TV.

When you install the TV using the wall mounting interface (optional

parts), attach it carefully so it will not drop.

1 If you use screw longer than standard, the TV might be damaged

internally.

2 If you use improper screw, the product might be damaged and

drop from mounted position. In this case, LG Electronics is not

responsible for it.

Separate purchase (Wall mounting bracket)

Model

24TL520S

24TL510S

28TK420S

28TL520S

28TL510S

Wall mount (A x B) (mm)

A

B

75 x 75 100 x 100

Standard screw M4 x L10

Number of screws 4

Wall mount bracket

(optional)

RW120

CAUTION

y Must use the enclosed screw in the box. (Depending on model)

y Disconnect the power rst, and then move or install the TV.

Otherwise electric shock may occur.

y If you install the TV on a ceiling or slanted wall, it may fall and result

in severe injury.

y Use an authorized LG wall mount and contact the local dealer or

qualied personnel.

y Do not over tighten the screws as this may cause damage to the TV

and void your warranty.

y Use the screws and wall mounts that meet the VESA standard. Any

damages or injuries by misuse or using an improper accessory are

not covered by the warranty.

y Screw length from outer surface of back cover should be under 8

mm.

Wall mount Pad

Back Cover

Standard screw

: M4 x L10

Wall mount Pad

Back Cover

Max.8 mm

NOTE

y Use the screws that are listed on the VESA standard screw

specications.

y The wall mount kit includes an installation manual and necessary

parts.

y The wall mount bracket is optional. You can obtain additional

accessories from your local dealer.

y The length of screws may dier depending on the wall mount. Be

sure to use the proper length.

y For more information, refer to the instructions supplied with the

wall mount.

ENG

ENGLISH

8

Satellite dish connection

(Only satellite models)

Connect the TV to a satellite dish to a satellite socket with a satellite

RF cable (75 Ω).

CI module connection

(Depending on model)

View the encrypted (pay) services in digital TV mode.

y Check if the CI module is inserted into the PCMCIA card slot in the

right direction. If the module is not inserted properly, this can cause

damage to the TV and the PCMCIA card slot.

y If the TV does not display any video and audio when CI+ CAM is

connected, please contact to the Terrestrial/Cable/Satellite Service

Operator.

PC connection

When connecting your PC to the HDMI input, set the HDMI input’s

[Input Label] to [PC]

(INPUT) (Remote control) [All Inputs] [EDIT ICON]

[PC]

Other connections

Connect your TV to external devices. For the best picture and audio

quality, connect the external device and the TV with the HDMI cable.

Some separate cable is not provided.

y Supported HDMI Audio format:

Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), DTS

(44.1 kHz, 48 kHz), PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)

(Depending on model)

Connections (notications)

Connect various external devices to the TV and switch input modes

to select an external device. For more information about an external

device’s connection, refer to the manual supplied with each device.

Available external devices are: HD receivers, DVD players, VCRs, audio

systems, USB storage devices, PC, gaming devices, and other external

devices.

NOTE

y The external device connection may dier from the model.

y Connect external devices to the TV regardless of the order of the

TV port.

y If you record a TV programme on a DVD recorder or VCR, make

sure to connect the TV signal input cable to the TV through a DVD

recorder or VCR. For more information of recording, refer to the

manual provided with the connected device.

y Refer to the external equipment’s manual for operating instructions.

y If you connect a gaming device to the TV, use the cable supplied

with the gaming device.

y In PC mode, there may be noise associated with the resolution,

vertical pattern, contrast or brightness. If noise is present, change

the PC output to another resolution, change the refresh rate to

another rate or adjust the brightness and contrast on the [Picture]

menu until the picture is clear.

y In PC mode, some resolution settings may not work properly

depending on the graphics card.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω)

(Not Provided).

y Use a signal splitter to use more than 2 TVs.

y If the image quality is poor, install a signal amplier properly to

improve the image quality.

y If the image quality is poor with an antenna connected, try to

realign the antenna in the correct direction.

y An antenna cable and converter are not supplied.

y Supported DTV Audio : MPEG, Dolby Digital, Dolby Digital Plus,

HE-AAC

ENGENGLISH

9

Remote control

The descriptions in this manual are based on the buttons on the

remote control. Please read this manual carefully and use the TV

correctly.

To replace batteries, open the battery cover, replace batteries (1.5

V AAA) matching the and ends to the label inside the

compartment, and close the battery cover. To remove the batteries,

perform the installation actions in reverse.

CAUTION

y Do not mix old and new batteries, as this may damage the remote

control.

y The remote control will not be included for all sales market.

Make sure to point the remote control toward the remote control

sensor on the TV.

#

(Some buttons and services may not be provided depending on

models or regions.)

1 To use the button, press and hold for more than 3 seconds.

(Power) Turns the TV on or o.

Selects Radio, TV and DTV programme.

(INPUT) Changes the input source.

(Q.Settings) Accesses the Quick Settings.

By zooming in on the selected area, you can view it in

full screen.

Recalls your preferred subtitle in digital mode.

Number buttons Enters numbers.

Alphabet buttons Enters letters.

Accesses the saved programme list.

(Space) Opens an empty space on the screen keyboard.

Shows programme guide.

1

You can access apps or Live TV using the number

buttons corresponding to the features.

Adjusts the volume level.

Views the information of the current programme and screen.

(SEARCH) Search for content such as TV programmes, movies

and other videos, or perform a web search by entering text in the

search bar.

(MUTE) Mutes all sounds.

(MUTE)

1

Accesses the [Accessibility] menu.

Scrolls through the saved programmes.

Moves to the previous or next screen.

ENG

ENGLISH

10

#

Streaming Service buttons Connects to the Video Streaming

Service.

(HOME) Shows the Home menu.

(HOME)

1

Shows the previous history.

Returns to the previous level.

Clears on-screen displays and returns to TV viewing.

Navigation buttons (up/down/left/right) Scrolls through menus

or options.

Selects menus or options and conrms your input.

Teletext buttons ( ) These buttons are used for

teletext.

1

Provides content related to the program you are

currently watching.

Audio descriptions function will be enabled.

Starts to record and displays record menu.

(Only Time Machine

Ready

supported model)

Returns to LIVE TV.

Control buttons ( ) Controls media contents.

, , , These access special functions in some

menus.

ENGENGLISH

11

Maintenance

Cleaning your TV

Clean your TV regularly to keep the best performance and to extend

the product lifespan.

y Make sure to turn the power o and disconnect the power cord and

all other cables rst.

y When the TV is left unattended and unused for a long time,

disconnect the power cord from the wall outlet to prevent possible

damage from lightning or power surges.

Screen, frame, cabinet and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and

soft cloth.

To remove major dirt, wipe the surface with a soft cloth dampened in

clean water or a diluted mild detergent. Then wipe immediately with

a dry cloth.

y Avoid touching the screen at all times, as this may result in damage

to the screen.

y Do not push, rub, or hit the screen surface with your ngernail or a

sharp object, as this may result in scratches and image distortions.

y Do not use any chemicals as this may damage the product.

y Do not spray liquid onto the surface. If water enters the TV, it may

result in re, electric shock, or malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

Preventing “Image burn” or “Burn-in” on

your TV screen

y If a xed image displays on the TV screen for a long period of time,

it will be imprinted and become a permanent disgurement on

the screen. This is “image burn” or “burn-in” and not covered by the

warranty.

y If the aspect ratio of the TV is set to 4:3 for a long period of time,

image burn may occur on the letterboxed area of the screen.

y Avoid displaying a xed image on the TV screen for a long period of

time (2 or more hours for LCD) to prevent image burn.

Troubleshooting

Cannot control the TV with the remote control.

y Check the remote control sensor on the product and try again.

y Check if there is any obstacle between the product and the remote

control.

y Check if the batteries are still working and properly installed

( to , to ).

No image display and no sound is produced.

y Check if the product is turned on.

y Check if the power cord is connected to a wall outlet.

y Check if there is a problem in the wall outlet by connecting other

products.

The TV turns o suddenly.

y Check the power control settings. The power supply may be

interrupted.

y Check if the [Sleep Timer] / [Timer Power O] is activated in the

[Timers] settings.

y Check if the [Auto Power O] is activated in the [General] [Eco

Mode] settings. (Depending on model)

y If there is no signal while the TV is on, the TV will turn o

automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), [No Signal] or [Invalid

Format] is displayed.

y Turn the TV o/on using the remote control.

y Reconnect the HDMI cable.

y Restart the PC with the TV on.

ENG

ENGLISH

12

Specications

Product specications may be changed without prior notice due to upgrade of product functions.

Models

Dimensions (W x H x D) (mm) Weight (kg)

Power consumption

Power

requirement

With stand Without stand With stand Without stand

28TK420S 641.5 x 428.7 x 159.2 641.5 x 396.3 x 59.5 4.6 4.5 28 W 19 V 2.0 A

24TL520S 563.1 x 367 x 150.1 563.1 x 340.9 x 58 3.3 3.25 25 W 19 V 2.0 A

28TL520S 649.4 x 420 x 150.1 649.4 x 393.8 x 61.4 4.55 4.5 28 W 19 V 2.0 A

24TL510S 563.1 x 393.8 x 148.6 563.1 x 340.9 x 58 3.6 3.25 25 W 19 V 2.0 A

28TL510S 649.4 x 447.8 x 187.5 649.4 x 393.8 x 61.4 4.95 4.5 28 W 19 V 2.0 A

Wireless module specication

y As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is congured for the regional

frequency table.

y For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

0197

Wireless LAN module(LGSWFAC71) Specication

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency Range Output Power(Max.)

2400 to 2483.5 MHz

5150 to 5725 MHz

5725 to 5850 MHz (Not for EU)

13 dBm

16.5 dBm

10 dBm

* "IEEE 802.11ac" is not available in all countries.

ENGENGLISH

13

AC/DC Adapter

Manufacturer: Lien Chang

Model: LCAP16B-E, LCAP21C

Manufacturer: Honor

Model: ADS-45FSN-19 19040GPG,

ADS-45SN-19-3 19040G

In: AC 100 – 240 V ~ 50/60 Hz

Out: DC 19 V 2.1 A

CI module Size (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm

Environment

condition

Operating Temperature 0 °C to 40 °C

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C

Storage Humidity Less than 85 %

(Depending on country)

Digital TV Analogue TV

Satellite Terrestrial Cable Terrestrial / Cable

Television system DVB-S/S2*

DVB-T

DVB-T2*

DVB-C

PAL/SECAM B/G, D/K,

I,SECAM L

Programme coverage 950 ~ 2150 Mhz

VHF III : 174 ~ 230 Mhz

UHF IV : 470 ~ 606 Mhz

UHF V : 606 ~ 862 Mhz

S Band II : 230 ~ 300 Mhz

S Band III : 300 ~ 470 Mhz

46 ~ 890 Mhz 46 ~ 862 Mhz

Maximum number of

storable programmes

6000 2000

External antenna impedance 75 Ω

* Only DVB-T2/C/S2 support models.

ENG

ENGLISH

14

WARNING!

Never place a television set in an unstable location. A television

set may fall, causing serious personal injury or death. Many

injuries, particularly to children, can be avoided by taking simple

precautions such as:

y Using cabinets or stands recommended by the manufacturer of

the television set.

y Only using furniture that can safely support the television set.

y Ensuring the television set is not overhanging the edge of the

supporting furniture.

y Not placing the television set on tall furniture (for example,

cupboards or bookcases) without anchoring both the furniture

and the television set to a suitable support.

y Not placing the television set on cloth or other materials that

may be located between the television set and supporting

furniture.

y Educating children about the dangers of climbing on furniture to

reach the television set or its controls.

If your existing television set is being retained and relocated, the

same considerations as above should be applied.

Symbols

Refers to alternating current(AC).

Refers to direct current(DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

MODEL

SERIAL No.

The model and serial number of the

product are located on the back and

on one side of the product.

Record them below in case you ever

need service.

Network Settings

1 Press the (Home) button on the remote to

access the Home menu. Point the (Settings)

icon and select by pressing the Wheel (OK)

button on the remote.

2 Point the

(All Settings)

icon and select

by pressing the Wheel (OK) button on the

remote.

All Settings

3 Select the Network

→

Wired Connection

(Ethernet) or Wi-Fi Connection.

Picture

NETWORK

TV Name

[LG] WebOS TV WEBOS3.5

Wired Connection (Ethernet)

Not Connected

Wi-Fi Connection

Not Connected

Wi-Fi Direct

LG Connect Apps

Sound

Programmes

Network

General

Safety

Accessibility

4 The device automatically tries to connect to the

network available (wired network first).

When you select the Wi-Fi Connection, the

network list available is displayed. Choose the

network you wish to use.

Picture

WI-FI NETWORK

Network /

ꔐ WI-FI : AAA

WI-FI : BBB

WI-FI : CCC

WI-FI : DDD

WI-FI : EEE

Add a hidden wireless network

Connect via WPS PBC.

Connect via WPS PIN.

Advanced Wi-Fi Settings

Sound

Programmes

Network

General

Safety

Accessibility

ON

For wireless AP (Router) that have the

symbol, you need to enter the security key.

5 If the connection is successful, the "Connected

to Internet" is displayed.

Picture

NETWORK

TV Name

[LG] WebOS TV WEBOS3.5

Wired Connection (Ethernet)

Not Connected

Wi-Fi Connection

Connected to Internet

Wi-Fi Direct

LG Connect Apps

Sound

Programmes

Network

General

Safety

Accessibility

You can check the status of connection in

Advanced Wi-Fi settings.

Picture

WI-FI NETWORK

Network /

ꔐ WI-FI : AAA

WI-FI : BBB

WI-FI : CCC

WI-FI : DDD

WI-FI : EEE

Add a hidden wireless network

Connect via WPS PBC.

Connect via WPS PIN.

Advanced Wi-Fi Settings

Sound

Programmes

Network

General

Safety

Accessibility

ON

* Image shown may differ from your TV.

* Image shown on a PC or mobile phone may vary depending on the OS(Operating System).

* App icon positions may vary on the platform, depending on the software version.

SMART TV Quick Setup Guide

www.lg.com

Troubleshooting Network Problems

1 Press the (Home) button on the remote to

access the Home menu. Point the

(Settings)

icon and select by pressing the Wheel (OK)

button on the remote.

2 Point the

(All Settings)

icon and select

by pressing the Wheel (OK) button on the

remote.

All Settings

3 Select the Network

→

Wired Connection

(Ethernet) or Wi-Fi Connection

→

Advanced

Wi-Fi settings.

Picture

NETWORK

TV Name

[LG] WebOS TV WEBOS3

Wired Connection (Ethernet)

Not Connected

Wi-Fi Connection

Not Connected

Wi-Fi Direct

LG Connect Apps

Sound

Programmes

Network

General

Safety

Accessibility



Picture

WI-FI NETWORK

Network /

ꔐ WI-FI : AAA

WI-FI : BBB

WI-FI : CCC

WI-FI : DDD

WI-FI : EEE

Add a hidden wireless network

Connect via WPS PBC.

Connect via WPS PIN.

Advanced Wi-Fi Settings

Sound

Programmes

Network

General

Safety

Accessibility

ON

Follow the instructions below that correlate to your

network status.

Check the TV or the AP (Router).

When X appears next to TV:

1

Check the connection status of the TV, AP

(Router).

2

Power off and power on the TV, AP (Router).

3

If you are using a static IP, enter the IP directly.

4

Contact internet service provider or AP (Router)

company.

Check the AP (Router) or consult your Internet

service provider.

When X appears next to Gateway:

1

Unplug the power cord of the AP (Router) and

try to connect after 5 seconds.

2

Initialize (Reset) the AP (Router).

3

Contact internet service provider or AP (Router)

company.

When X appears next to DNS:

1

Unplug the power cord of the AP (Router) and

try to connect after 5 seconds.

2

Initialize (Reset) the AP (Router).

3

Check that the MAC address of the TV/AP (Router)

is registered with your Internet service provider.

(The MAC address displayed on the right

pane of the network status window should be

registered with your Internet service provider.)

4

Check the AP (Router) manufacturer’s website

to make sure your router has the latest firmware

version installed.

SmartShare PC SW Installing & Setting

1 Install the SmartShare PC SW programme on your PC.

2 Go to www.lg.com. Then, select your region.

3 Select SUPPORT. Then, select Drivers & Software, SOFTWARE UPDATE or Software & Firmware.

4 Search for your model. Then, select SmartShare PC SW.

5 You can run the programme when installation is complete.

NOTE

y

SmartShare service is only available if TV and other devices are connected via a single AP (Router).

SmartShare Connection to Smartphone

Updating the TV Firmware

* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may

take a few minutes.

1 (Home)

→

(Settings)

→

(All Settings)

→

General

→

About This TV

→

CHECK FOR UPDATES

2 After checking the version of the software, update it.

If you check the "Allow Automatic Updates", you can update the software automatically.

Picture

GENERAL

Eco Mode

Monbile TV On

SIMPLINK (HDMI-CEC)

LG Wireless Keyboard

Setting Help

Screen Saver

Reset to Initial Settings

About This TV

HDMI ULTRA HD Deep Colour

Sound

Programmes

Network

General

Safety

Accessibility

Picture

ABOUT THIS TV

General /

Software Version xx.xx.xx

ꔐ

Allow Automatic Updates

TV Information

[LG] webOS TV WEBOS3.5

Customer Service

User Agreements

Legal Notice

Open Source Software Notice

Sound

Programmes

Network

General

Safety

Accessibility

CHECK FOR UPDATES



1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must

on the same local network.

2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG

phones).

3 Enable your smartphone to share content files with other devices.

4 Open Device Connector application.

(Home)

→

Device Connector

→

Smartphone

→

CONTENT SHARE.

5 Select the file type you want to play (movie, audio or photo).

6 Select a movie, music or photo file to play on the TV.

7 Play the media file to view and enjoy it on your TV.

Miracast Setting

WiDi (Wireless Display) Setting

Intel’s WiDi (Wireless Display) technology enables easy and fast connection without wires or internet

network for mirrored and dual monitor display on your TV. You can sit back and experience your favorite

movies, videos, photos, online shows and more in full HD on your TV with great image clarity and sound.

(Home)/ (Input)

→

Screen Share

1 Intel's WiDi is set to On. Your laptop runs the Intel WiDi programme.

2 It detects LG webOS TVs available, which supports WiDi. In the list, select the TV you want and click

Connect. Enter the number shown on the screen into the input field ( ) on your laptop and then click

Continue.

Notebook Screen

********



3 The laptop screen appears on the TV screen. The wireless environment may affect the screen display.

If the connection is poor, the Intel WiDi connection may be lost.

* LG TVs do not need to register.

Wi-Fi Direct Setting

(Home)

→

Settings)

→

All Settings)

→

Network

→

Wi-Fi Direct

If a local network is not available, you can connect a portable device directly to the

TV using Wi-Fi Direct.

With SmartShare, you can share files or screens of devices connected to Wi-Fi

Direct.

1 When you open Wi-Fi Direct menu, a list of available devices appears.

2 When you are prompted to request connection, select Yes . Wi-Fi Direct is now

connected to your TV.

Please call LG Customer Service if you experience any problems.

Picture

Wi-Fi Direct

Sound

Programmes

Network

General

Safety

Accessibility

REFRESH LIST

Network /

ꔐ WI-FI : AAA

WI-FI : BBB

WI-FI : CCC

WI-FI : DDD

WI-FI : EEE

Miracast allows a portable device to securely send video and sound to the TV wirelessly.

(Home)/ (Input)

→

Screen Share

1 Miracast should be set to "ON" on your portable device.

2 When your TV is detected, select the device on your portable device.

When connection is completed, the device screen appears on the TV screen.

If

you turn Listen Mode to ON after launching the Screen Share app, you can connect the

device without starting the Screen Share app.

Netzwerkeinstellungen

1 Drücken Sie zur Anzeige des Home-Menüs

die Taste (Home) auf der Fernbedienung.

Markieren Sie das Symbol (Einstellungen)

und wählen Sie es durch Drücken der Taste

Rad (OK) auf der Fernbedienung aus.

2 Markieren Sie das Symbol (Alle

Einstellungen) und wählen Sie es durch Drücken

der Taste Rad (OK) auf der Fernbedienung aus.

Alle Einstellungen

3

Wählen Sie

Netzwerk

→

Drahtgebundene

Verbindung (Ethernet)

oder

Wi-Fi-Verbindung

.

Bild

Netzwerk

TV-Name

[LG] WebOS TV WEBOS3.5

Drahtgebundene Verbindung (Ethernet)

Nicht verbunden

Wi-Fi-Verbindung

Nicht verbunden

Wi-Fi Direct

LG Connect Apps

Ton

Sender

Netzwerk

Allgemein

Sicherheit

Barrierefreiheit

4 Das Gerät versucht automatisch, eine Verbindung

zu dem verfügbaren Netzwerk herzustellen (zuerst

kabelgebundenes Netzwerk).

Wenn Sie die Wi-Fi-Verbindung auswählen, wird

eine Liste mit den verfügbaren Netzwerken

angezeigt. Wählen Sie das gewünschte Netzwerk

aus.

Bild

Wi-Fi-Netzwerk

Netzwerk /

ꔐ WI-FI : AAA

WI-FI : BBB

WI-FI : CCC

WI-FI : DDD

WI-FI : EEE

Verstecktes W-LAN hinzufügen

Über WPS-PBC verbinden.

Über WPS-PIN verbinden.

Erweiterte Wi-Fi-Einstellungen

Ton

Sender

Netzwerk

Allgemein

Sicherheit

Barrierefreiheit

EIN

Für kabellose Router (AP) mit dem Symbol

müssen Sie den Sicherheitsschlüssel eingeben.

5 Wenn die Verbindung hergestellt wurde, wird

„Mit dem Internet verbunden“ angezeigt.

Bild

Netzwerk

TV-Name

[LG] WebOS TV WEBOS3.5

Drahtgebundene Verbindung (Ethernet)

Nicht verbunden

Wi-Fi-Verbindung

Mit dem Internet verbunden

Wi-Fi Direct

LG Connect Apps

Ton

Sender

Netzwerk

Allgemein

Sicherheit

Barrierefreiheit

Sie können den Verbindungsstatus unter

Erweiterte Wi-Fi-Einstellungen prüfen.

Bild

Wi-Fi-Netzwerk

Netzwerk /

ꔐ WI-FI : AAA

WI-FI : BBB

WI-FI : CCC

WI-FI : DDD

WI-FI : EEE

Verstecktes W-LAN hinzufügen

Über WPS-PBC verbinden.

Über WPS-PIN verbinden.

Erweiterte Wi-Fi-Einstellungen

Ton

Sender

Netzwerk

Allgemein

Sicherheit

Barrierefreiheit

EIN

* Ihr TV-Gerät kann von der Abbildung möglicherweise leicht abweichen.

* Auf PC oder Mobiltelefon angezeigte Bilder können möglicherweise je nach Betriebssystem leicht abwei-

chen.

* Die Positionen der Anwendungssymbole können auf der Plattform je nach Softwareversion variieren.

Kurzanleitung zur Einrichtung des SMARTTV

www.lg.com

La pagina sta caricando ...

LG 24TL510S-W Manuale del proprietario

Questo manuale è adatto anche per

LG 24TL510S-W Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti