Avid NEXIS 6.0 Guida utente

Marca: Avid

Modello: NEXIS 6.0

Tipo: Guida utente

Avid

NEXIS

™

Setup and Maintenance Guide

Version 6.0

Legal Notices

Product specifications are subject to change without notice and do not represent a commitment on the part of Avid Technology, Inc.

This product is subject to the terms and conditions of a software license agreement provided with the software. The product may only be used in accordance

with the license agreement.

This product may be protected by one or more U.S. and non-U.S patents. Details are available at www.avid.com/patents.

Part of the software embedded in this product is gSOAP software.

THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO

EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

This document is protected under copyright law. An authorized licensee of Avid NEXIS may reproduce this publication for the licensee’s own use in learning

how to use the software. This document may not be reproduced or distributed, in whole or in part, for commercial purposes, such as selling copies of this

document or providing support or educational services to others. This document is supplied as a guide for Avid NEXIS. Reasonable care has been taken in

preparing the information it contains. However, this document may contain omissions, technical inaccuracies, or typographical errors. Avid Technology, Inc.

does not accept responsibility of any kind for customers’ losses due to the use of this document. Product specifications are subject to change without notice.

The following disclaimer is required by Apple Computer, Inc.:

APPLE COMPUTER, INC. MAKES NO WARRANTIES WHATSOEVER, EITHER EXPRESS OR IMPLIED, REGARDING THIS PRODUCT, INCLUDING

WARRANTIES WITH RESPECT TO ITS MERCHANTABILITY OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. THE EXCLUSION OF IMPLIED

WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY PROVIDES YOU WITH

SPECIFIC LEGAL RIGHTS. THERE MAY BE OTHER RIGHTS THAT YOU MAY HAVE WHICH VARY FROM STATE TO STATE.

The following disclaimer is required by Sam Leffler and Silicon Graphics, Inc. for the use of their TIFF library:

Permission to use, copy, modify, distribute, and sell this software [i.e., the TIFF library] and its documentation for any purpose is hereby granted without fee,

provided that (i) the above copyright notices and this permission notice appear in all copies of the software and related documentation, and (ii) the names of

Sam Leffler and Silicon Graphics may not be used in any advertising or publicity relating to the software without the specific, prior written permission of Sam

Leffler and Silicon Graphics.

THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT

LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL

DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED

OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR

PERFORMANCE OF THIS SOFTWARE.

The following disclaimer is required by the Independent JPEG Group:

This software is based in part on the work of the Independent JPEG Group.

This Software may contain components licensed under the following conditions:

Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms

and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by

the University of California, Berkeley. The name of the University may not be used to endorse or promote products derived from this software without

specific prior written permission. THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the

above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. This software

is provided " as is" without express or implied warranty.

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the

above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. This software

is provided " as is" without express or implied warranty.

Permission to use, copy, modify, distribute, and sell this software for any purpose is hereby granted without fee, provided that the above copyright notice

appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Daniel

Dardailler not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Daniel Dardailler makes

no representations about the suitability of this software for any purpose. It is provided " as is" without express or implied warranty.

iii

Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all

copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software.

THIS SOFTWARE IS BEING PROVIDED " AS IS" , WITHOUT ANY EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR, NEITHER THE AUTHOR NOR

AT&T MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS

FITNESS FOR ANY PARTICULAR PURPOSE.

This product includes software developed by the University of California, Berkeley and its contributors.

The following disclaimer is required by Paradigm Matrix:

Portions of this software licensed from Paradigm Matrix.

The following disclaimer is required by Ray Sauers Associates, Inc.:

“Install-It” is licensed from Ray Sauers Associates, Inc. End-User is prohibited from taking any action to derive a source code equivalent of “Install-It,”

including by reverse assembly or reverse compilation, Ray Sauers Associates, Inc. shall in no event be liable for any damages resulting from reseller’s

failure to perform reseller’s obligation; or any damages arising from use or operation of reseller’s products or the software; or any other damages, including

but not limited to, incidental, direct, indirect, special or consequential Damages including lost profits, or damages resulting from loss of use or inability to use

reseller’s products or the software for any reason including copyright or patent infringement, or lost data, even if Ray Sauers Associates has been advised,

knew or should have known of the possibility of such damages.

The following disclaimer is required by Videomedia, Inc.:

“Videomedia, Inc. makes no warranties whatsoever, either express or implied, regarding this product, including warranties with respect to its merchantability

or its fitness for any particular purpose.”

“This software contains V-LAN ver. 3.0 Command Protocols which communicate with V-LAN ver. 3.0 products developed by Videomedia, Inc. and V-LAN

ver. 3.0 compatible products developed by third parties under license from Videomedia, Inc. Use of this software will allow “frame accurate” editing control of

applicable videotape recorder decks, videodisc recorders/players and the like.”

The following disclaimer is required by Altura Software, Inc. for the use of its Mac2Win software and Sample Source Code:

The following disclaimer is required by Interplay Entertainment Corp.:

The “Interplay” name is used with the permission of Interplay Entertainment Corp., which bears no responsibility for Avid products.

This product includes portions of the Alloy Look & Feel software from Incors GmbH.

This product includes software developed by the Apache Software Foundation (http://www.apache.org/).

This product may include the JCifs library, for which the following notice applies:

the installation CD.

Avid Interplay contains components licensed from LavanTech. These components may only be used as part of and in connection with Avid Interplay.

Attn. Government User(s). Restricted Rights Legend

U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or “commercial computer software

documentation.” In the event that such Software or documentation is acquired by or on behalf of a unit or agency of the U.S. Government, all rights with

respect to this Software and documentation are subject to the terms of the License Agreement, pursuant to FAR §12.212(a) and/or DFARS §227.7202-1(a),

as applicable.

Trademarks

Avid, the Avid Logo, Avid Everywhere, Avid DNXHD, Avid DNXHR, Avid Nexis, AirSpeed, Eleven, EUCON, Interplay, iNEWS, ISIS, Mbox, MediaCentral,

Media Composer, NewsCutter, Pro Tools, ProSet and RealSet, Maestro, PlayMaker, Sibelius, Symphony, and all related product names and logos, are

registered or unregistered trademarks of Avid Technology, Inc. in the United States and/or other countries. The Interplay name is used with the permission

of the Interplay Entertainment Corp. which bears no responsibility for Avid products. All other trademarks are the property of their respective owners. For a

full list of Avid trademarks, see: http://www.avid.com/US/about-avid/legal-notices/trademarks.

Apple, Macintosh, and Safari are either registered trademarks or trademarks of Apple Computer, Inc., registered in the U.S. and other countries. HP is a

registered trademark of Hewlett-Packard Company. Intel is a registered trademark of Intel Corporation. Kingston is a registered trademarks of Kingston

Technology Corporation. All other marks may be the property of their respective titleholders. Windows is either a registered trademark or trademark of

Microsoft Corporation in the United States and/or other countries. All other trademarks contained herein are the property of their respective owners.

Avid NEXIS Setup and Maintenance Guide • Created 6/3/16 • This document is distributed by Avid in online (electronic) form only, and is

not available for purchase in printed form.

Using This Guide

The Avid

NEXIS

™

media network provides a high-performance distributed file system that contains high-

capacity shared media storage for workgroups of connected Avid

editing workstations.

Symbols and Conventions

Avid documentation uses the following symbols and conventions:

If You Need Help

If you are having trouble using your Avid product:

Symbol or Convention Meaning or Action

A note provides important related information, reminders, recommendations, and strong

suggestions.

A caution means that a specific action you take could cause harm to your computer or cause you

to lose data.

A warning describes an action that could cause you physical harm. Follow the guidelines in this

document or on the unit itself when handling electrical equipment.

A user tip provides a helpful hint that can aid users in getting the most from their system.

A shortcut shows the user keyboard or mouse shortcuts for a procedure or command.

> This symbol indicates menu commands (and subcommands) in the order you select them. For

example, File > Import means to open the File menu and then select the Import command.

This symbol indicates a single-step procedure. Multiple arrows in a list indicate that you

perform one of the actions listed.

(Windows), (Windows

only), (Macintosh), or

(Macintosh only)

This text indicates that the information applies only to the specified operating system, either

Windows or Macintosh OS X.

Bold font Bold font is primarily used in task instructions to identify user interface items and keyboard

sequences.

Italic font Italic font is used to emphasize certain words and to indicate variables.

Courier Bold font

Courier Bold font identifies text that you type.

Ctrl+key or mouse action Press and hold the first key while you press the last key or perform the mouse action. For

example, Command+Option+C or Ctrl+drag.

| (pipe character) The pipe character is used in some Avid product names, such as Interplay | Production. In this

document, the pipe is used in product names when they are in headings or at their first use in

text.

1. Retry the action, carefully following the instructions given for that task in this guide. It is especially important

to check each step of your workflow.

2. Check the latest information that might have become available after the documentation was published.

New information is available in the ReadMe file supplied in your Avid software installation kit as a PDF

document and is also available online.

Always check online for the most up-to-date release notes or ReadMe because the online version is

updated whenever new information becomes available. To view the online versions, visit the Knowledge

Base at www.avid.com/US/support.

3. Check the documentation that came with your Avid application or your hardware for maintenance or

hardware-related issues.

4. Visit the online Knowledge Base at www.avid.com/US/support. Online services are available 24 hours per

day, 7 days per week. Search this online Knowledge Base to find answers, to view error messages, to access

troubleshooting tips, to download updates, and to read or join online message-board discussions.

Accessing the Online Documentation

The Avid online documentation contains all the product documentation in PDF format and Help files where

relevant. You can access the documentation on the Knowledge Base page for your release. Download and install

Acrobat Reader before you access the PDF documentation.

Avid Training Services

Avid makes lifelong learning, career advancement, and personal development easy and convenient. Avid

understands that the knowledge you need to differentiate yourself is always changing, and Avid continually

updates course content and offers new training delivery methods that accommodate your pressured and

competitive work environment.

For information on courses/schedules, training centers, certifications, courseware, and books, please visit

www.avid.com/support and follow the Training links, or call Avid Sales at 800-949-AVID (800-949-2843).

Contents

Using This Guide ................................................................................................................................. iv

Symbols and Conventions ................................................................................................................................... iv

If You Need Help.................................................................................................................................................. iv

Accessing the Online Documentation ................................................................................................................... v

Avid Training Services .......................................................................................................................................... v

Chapter 1 Avid NEXIS System Overview .................................................................................................... 1

Avid NEXIS Configurations .................................................................................................................................. 1

Avid NEXIS | E2 ............................................................................................................................................ 1

Avid NEXIS | E4 ............................................................................................................................................ 1

System Director Appliance............................................................................................................................ 2

Media Packs.................................................................................................................................................. 2

System Details ..................................................................................................................................................... 2

Engine ........................................................................................................................................................... 2

Cabling............................................................................................................................................................... 12

Chapter 2 Connecting the Equipment....................................................................................................... 13

Rack Mounting Guidelines and Requirements................................................................................................... 13

Mounting the Engine .......................................................................................................................................... 13

Installing the Media Packs ................................................................................................................................. 14

Connecting Power to Equipment ....................................................................................................................... 15

Connecting the Hardware to a Switch................................................................................................................ 15

Supported Cabling ............................................................................................................................................. 15

Chapter 3 Software Installation and System Setup ................................................................................. 17

System Setup Information.................................................................................................................................. 17

What is DNS? .................................................................................................................................................... 18

What is NTP?..................................................................................................................................................... 18

Installing and Setting Up the System ................................................................................................................. 18

Registering the Avid NEXIS and Downloading the Avid NEXIS Software .................................................. 18

Configuring the Computer’s IP Address...................................................................................................... 19

Installing the Software and Setting up the Avid NEXIS System.................................................................. 22

Creating the File System............................................................................................................................. 25

Binding the Media Packs............................................................................................................................. 27

Chapter 4 Adding and Replacing Hardware ............................................................................................. 29

Collecting Logs for Customer Care.................................................................................................................... 29

Hardware Faults................................................................................................................................................. 29

Removing the Bezel........................................................................................................................................... 30

About Drive Failures .......................................................................................................................................... 30

vii

Replacing a Drive............................................................................................................................................... 31

Removing a Drive ....................................................................................................................................... 31

Inserting a Drive ......................................................................................................................................... 31

Adding Media Packs .......................................................................................................................................... 31

Adding a Media Pack to an Avid NEXIS | E4 Engine.................................................................................. 32

Power Supply LEDs ........................................................................................................................................... 32

Replacing a Power Supply ................................................................................................................................ 32

Replacing a Controller ....................................................................................................................................... 33

Replacing a Controller................................................................................................................................. 33

Replacing an Engine.......................................................................................................................................... 34

Adding an Engine to Your Infrastructure............................................................................................................ 35

Chapter 5 Specifications and Notices....................................................................................................... 36

Physical.............................................................................................................................................................. 36

Electrical and Power .......................................................................................................................................... 36

Altitude and Temperature .................................................................................................................................. 36

Shock, Vibration and Noise................................................................................................................................ 37

Approvals ........................................................................................................................................................... 37

Uninterruptible Power Supply (UPS).................................................................................................................. 38

Warnings and Cautions...................................................................................................................................... 39

Proposition 65 Warning...................................................................................................................................... 39

FCC Notice ........................................................................................................................................................ 39

Class A Equipment...................................................................................................................................... 40

Class B Equipment...................................................................................................................................... 40

Modifications ............................................................................................................................................... 40

Cables ......................................................................................................................................................... 40

Canadian Notice (Avis Canadien)...................................................................................................................... 40

Class A Equipment...................................................................................................................................... 40

Class B Equipment...................................................................................................................................... 40

LED Safety Notices............................................................................................................................................ 41

European Union Declaration of Conformity ....................................................................................................... 41

Disposal of Waste Equipment by Users in the European Union........................................................................ 42

Argentina Conformity ......................................................................................................................................... 42

Australia and New Zealand EMC Regulations................................................................................................... 43

Japan EMC Regulations .................................................................................................................................... 43

Class A Equipment...................................................................................................................................... 43

Korean EMC Regulations .................................................................................................................................. 43

Class A Equipment...................................................................................................................................... 43

Taiwan EMC Regulations .................................................................................................................................. 44

Index .................................................................................................................................................... 48

1 Avid NEXIS System Overview

The Avid NEXIS system is a shared storage solution for acquisition, creative, distribution, and archive media

workflows. Avid network storage systems are built for media and entertainment. They enable multiple clients to

share, capture, play, and edit video and audio media.

Clients access Avid NEXIS systems through external switch connections. The Avid NEXIS Management Console

provides workspace and system management functionality.

This chapter provides an overview of the Avid NEXIS system and the basic function of each component. Other

chapters in this guide describe how to install the system in a rack, connect the power and Ethernet cables, and

configure the system.

Avid NEXIS Configurations

The Avid NEXIS system is available in the following hardware configurations.

Avid NEXIS | E2

The Avid NEXIS | E2 is a 2U Engine with one Avid NEXIS | E2 Controller, two 764W power supply/cooling

modules (PCMs), two solid state system drives (400GB), and one Media Pack (see “Media Packs” on page 2).

The Avid NEXIS | E2, with the Avid NEXIS | FS Foundation license, can function as both a storage engine and a

System Director for itself and up to four Media Packs, and up to 40 clients. To manage more than four Media

Packs in the same shared storage system, you must deploy a System Director Appliance (see “System Director

Appliance” on page 2), which takes over the System Director functions and provides no media storage.

Avid NEXIS | E4

The Avid NEXIS | E4 is a 4U Engine with one Avid NEXIS | E4/SDA Controller, and four 580W power supply/

cooling modules. The Engine has 24 drive slots; two are reserved for the solid state system drives (400GB). The

remaining slots support up to two Media Packs (see “Media Packs” on page 2), and two spare media drives.

Empty drive slots must be covered with blank plates to maintain proper airflow and cooling.

The Avid NEXIS | E4, with the Avid NEXIS | FS Foundation license, can function as both a storage engine and a

System Director for itself and up to four Media Packs, and up to 40 clients. To manage more than four Media

Packs in the same shared storage system, you must deploy a System Director Appliance (see “System Director

Appliance” on page 2), which takes over the System Director functions and provides no media storage.

System Director Appliance

The System Director Appliance is a 2U server built from common hardware modules as other Avid NEXIS

products. It contains one Avid NEXIS | E4/SDA Controller, two 764W power supply/cooling modules, and two

solid state system drives (400GB). The System Director Appliance does not provide media storage; the unused

drive slots are covered with blank plates. It runs the System Director for one or more Avid NEXIS engines that

collectively contain up to 24 Media Packs, with one of the following licenses:

• Avid NEXIS | FS Extended license — Supports a System Director Appliance managing up to 12 Media Packs

and up to 165 clients, with any combination of Avid NEXIS Engines in the same shared storage system.

• Avid NEXIS | FS Advanced license — Supports a System Director Appliance managing from 13 to 24 Media

Packs and up to 330 clients, with any combination of Avid NEXIS Engines in the same shared storage system.

Media Packs

A Media Pack is a set of 10 drives, all of which are either 2TB or 6TB, yielding a Media Pack capacity of 20TB or

60TB.

System Details

The Engines and the System Director Appliance are described in more detail in the following sections.

Engine

The Engine is a rack-mountable unit housing the other system components (drives, power supplies). If a

component fails, the system is designed to remain operational while you replace it. Do not shut down an Engine or

the System Director Appliance before replacing a failed part.

Data passes between the Engine and clients through a switch connected to the Engine with one or more 10 Gb

Ethernet connections. These connections provide clients access to the data on the media drives.

Avid NEXIS | E2 Engine Front

The front of the Avid NEXIS | E2 has a removable bezel (not shown). Removing the bezel allows access to the

drive slots. The Avid NEXIS | E2 supports one Media Pack (10 drives) for media storage and two system drives.

As shipped from Avid, the system drives occupy the first two slots in the Engine (0 and 1). Drive slot numbering

is shown below.

Avid NEXIS | E2 Rear View

The rear of the Avid NEXIS | E2 provides access to the Controller and the PCMs.

Avid NEXIS | E2 Rear View Features

Control Panel

The following figure shows the control panel on the Avid NEXIS | E2 and Avid NEXIS | E4 and the System

Director Appliance, on the left side of the chassis.

Control Panel on Avid NEXIS | E2, Avid NEXIS | E4, and System Director Appliance

Control Panel Features

Callout Description

1 764W PCMs (0=left, 1=right, as viewed from the rear)

2 Avid NEXIS | E2 Controller

Description Status/Purpose

Input/Mute Switch Used to set the LED display and to transition alarm states (depends on VPD setup).

System Power LED Green when system is on (operational).

Amber when system is in standby mode (not operational).

Avid NEXIS | E4 Front View

The front of the Engine has a removable bezel (not shown). Removing the bezel allows access to the drive slots.

The Avid NEXIS | E4 Engine supports two Media Packs (10 drives each) for media storage and two system

drives. As shipped from Avid, the system drives occupy the first two slots in the Engine (0 and 1). Drive slot

numbering is shown below.

The drives in the Avid NEXIS | E4 Engine are numbered from top left (0) to bottom right (23), as shown.

Avid NEXIS | E4 Rear View

The rear of the Avid NEXIS | E4 provides access to the Controller and the PCMs.

Module Fault LED Amber when there is a system hardware fault. In that case, another LED on the faulty component

may be lit.

Logical Fault LED Amber when something other than the enclosure management system (usually a drive) fails.

Enclosure ID Display Displays the enclosure identification number (optional; useful with multiple enclosure systems)

Description Status/Purpose

Avid NEXIS | E4 Engine Rear View Features

Controllers

Depending on your Avid NEXIS model, the Engine has one of the following Controllers.

If a Controller fails, see “Replacing a Controller” on page 33.

The Controller provides the software management functionality, in some cases including the System Director.

The Controllers are turned on when the power supplies are on. The following figure and table describe the

Controller features. Unidentified features are not used.

Controller

Callout Description

1 Four 580W PCMs (as viewed from the rear, PCM 0=top left, PCM 1=bottom left, PCM 2=top right,

PCM 3=bottom right)

2 Avid NEXIS | E4/SDA Controller, installed in the top slot by default (identified in error and status messages as

Controller 0)

Avid NEXIS Model Controller Type Technical Details

Avid NEXIS | E2 Avid NEXIS | E2 Controller Six core controller with 16GB memory. Supports a 10GbE

switch connection.

Labeled “Storage Controller | 10.”

Avid NEXIS | E4 and

System Director Appliance

Avid NEXIS | E4/SDA

Controller

Eight core controller with 32GB memory. Supports a 10GbE

switch connection.

Labeled “Storage Controller | 20.”

Controller Features

System Director

The System Director maintains all information about the file system. The System Director is either embedded on

a Controller in an Avid NEXIS | E2 or Avid NEXIS | E4 Engine, or runs separately on a System Director

Appliance. In a multi-Engine Avid NEXIS storage system, there can be only one System Director. If the System

Director is embedded, the first Engine configured in a multi-Engine system runs the System Director for the entire

system.

The embedded System Director can manage up to four Media Packs, in any combination of Avid NEXIS | E2 and

Avid NEXIS | E4 Engines.

The System Director Appliance can manage up to 24 Media Packs, in any combination of Avid NEXIS Engines,

with either the Avid NEXIS | FS Extended license (for up to 12 Media Packs) or the Avid NEXIS | FS Advanced

license (for between 13 and 24 Media Packs).

Description Purpose

Ethernet Connectors The top port, called the Management Port, is used to connect to a laptop or other

computer to install the Avid NEXIS software and initially configure the system. The

port has the following LEDs:

Right side:

• Steady green: Link is active

• Flashing green: Network activity

Left side—Network speed:

• Yellow: 1000Mb/s

• Green: 100Mb/s

• Off: 10Mb/s

Power/OK, Fault, and ID LEDs Power/OK: Green when the controller is operating correctly. Flashing green

indicates a controller VPD error.

Fault: Amber when the controller has a fault.

ID: Blue when the controller is being identified.

POST LEDs Shows the boot progress of the controller. If the controller fails to boot, the LEDs

show the stage in which the error occurred.

Controller identification label Indicates the Controller type, which specifies in which Engine it can be used:

• Storage Controller | 10 for Avid NEXIS | E2

• Storage Controller | 20 for Avid NEXIS | E4 and the System Director Appliance

Controller Release Latch To remove the controller from the Engine (see “Replacing a Controller” on page 33)

10GbE Ports Connect to a network switch (see “Connecting the Hardware to a Switch” on

page 15)

The System Director:

• Manages the metadata by storing directory information and file attributes.

• Provides a location to coordinate file access modes (read/write), file locking, range locking, performance data

collection, logging, file lookup, and directory change tracking for client systems.

• Provides the following information:

- Identity of all connected storage systems

- Information about the drives, power, cooling and Controllers in the configuration

- Names of workspaces

- Lists of users and groups within the system

The System Director does not store client data (media files); these are stored on the Media Packs (drives) within

the Engine. System Director metadata is mirrored on the system drives in the Engine, or on the system drives in

the System Director Appliance.

System Directors, workgroup servers, and clients must all be synchronized with a common time of day. For

information on setting the Network Time Protocol (NTP), see “Software Installation and System Setup” on

page 17.

Media Pack and System Drives

The Avid NEXIS Engines contain varying numbers of Media Packs, 10 drives per pack. As shipped from Avid, all

the drives in a single Media Pack are either 2TB or 6TB. The System Director Appliance contains no Media

Packs, as it is not used for client data storage.

When replacing a failed drive in a Media Pack, make sure to use a drive of the same capacity as, or larger than, the

others in the Media Pack. For more information, see “Replacing a Drive” on page 31 and the Avid NEXIS

Administration Guide.

Each Engine and System Director Appliance has two system drives, of 400GB capacity. The System Director,

whether running on an Engine or in the System Director Appliance, uses the system drives for metadata, startup

files, and other system files. The Engine or System Director Appliance can run with one failed system drive. Avid

recommends replacing it as soon as possible.

The system drives typically occupy slots 0 and 1, and the Media Pack drives typically use the remaining slots.

To distinguish between the types of drives:

• System drives are labeled similar to the following, indicating the capacity, the letters SS for solid state, and a

manufacturer serial number:

• Media Pack drives are labeled similar to the following, indicating the capacity (2TB or 6TB), the abbreviation

7K2 indicating the drive speed (7200 rpm), and a manufacturer serial number:

System drives are physically 2.5” but are in a 3.5” carrier, like the Media Pack drives.

Avid NEXIS | E2 and Avid NEXIS | E4 Media Pack and System drives

The drives in the Avid NEXIS | E2 and Avid NEXIS | E4 Media Packs have a lock indicator and two LEDs that

show the drive status, explained in the following figure and table.

Leave failed drives in place until you have a replacement so you maintain the proper airflow. Obtain a

replacement as soon as possible.

Power Supplies

Depending on your Avid NEXIS model, the Engine or System Director Appliance has the following number and

type of power supply/cooling modules (PCMs):

• Avid NEXIS | E2 and System Director Appliance — Two 764W PCMs (integrated fans)

• Avid NEXIS | E4 — Four 580W PCMs (integrated fans)

The power supplies are turned on when the power cord is plugged in and the power switch is on.

Media Pack Drive and System drives

Callout Description Status

1 Locking window showing drive is locked Red when drive is locked

2 Locking window showing drive is unlocked Black when drive is unlocked

3 Power and activity LED Off—No power

Blinking—I/O activity

4 Fault and identify LED Blinking 1second on, 1 second off—To identify the drive

On—Drive failed

Off—OK

In the Avid NEXIS | E2 and the System Director Appliance, the PCMs operate in a redundant configuration. For

maximum protection from power loss, both PCMs must be plugged in to separate electrical circuits and turned on.

With both PCMs plugged in and turned on, the system balances its power needs between them. If one PCM fails,

the system can continue operating.

In the Avid NEXIS | E4, the PCMs operate in a dual-redundant configuration. For maximum protection from

power loss, each pair of PCMs must be plugged in to separate electrical circuits (for example, two on circuit A and

two on circuit B), and all must be turned on. With all four PCMs plugged in and turned on, the system balances its

power needs among them.

The Avid NEXIS | E4 can run with any two of the four PCMs working.

Avid NEXIS | E2 (764W) PCM Features

The bottom two LEDs, marked with battery icons, are not used.

Avid NEXIS | E4 (580W) PCM LEDs

The LEDs on the Avid NEXIS | E4 PCM work together to indicate overall module status; in the following table,

for each row, all the LEDs must be in the listed state for the definition to apply.

580W Power and Cooling Module (PCM) LED States

Leave failed power supply or cooling modules in place until you have a replacement so you maintain the

proper airflow. Obtain a replacement as soon as possible.

AC Fault Fan Fault Power/Module OK DC Fault Definition

For readability, a series of dashes (---) means the LED is OFF.

--- --- --- --- No AC power on any PCM

On --- --- On No AC power on this PCM

--- --- On --- AC present; PCM OK

--- --- On On PCM fan speed is outside acceptable limits

--- On --- --- PCM fan has failed

On On --- On PCM fault (over temperature, over voltage, or over

current)

--- --- Flashing --- Standby mode

Flashing Flashing --- Flashing PCM firmware download in progress

Cabling

For a list of cables qualified with the Avid system, see “Supported Cabling” on page 15.

2 Connecting the Equipment

This chapter explains how to rack mount and connect the system hardware.

Rack Mounting Guidelines and Requirements

Avid recommends installing the Avid NEXIS hardware in a rack, using the following guidelines:

• If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment

might be greater than room ambient. Make sure the rack environment is compatible with the maximum

ambient temperature (Tma) specified by the manufacturer.

• Avoid uneven mechanical loading.

• Make sure your rack enclosure is stable enough to prevent tipping over if using extending sliding rails.

• Follow the equipment nameplate ratings to avoid overloading the circuits.

• Maintain reliable grounding of rack-mounted equipment, especially regarding supply connections other than

direct connections to the branch circuit (for example, power strips).

• Avid airflow is from the front of the enclosure to the rear. Make sure nothing blocks airflow to the front panel

surface and the rear.

• For normal operation, maintain approximately 2 feet (0.6 meters) of open space in front of and behind the

rack. This allows free access to the components in the rack for operating changes or adjustments. For service,

maintain approximately 3 feet (1 meter) of open space in front of the rack and 2 feet (0.6 meters) of open

space behind the rack. This allows for the removal of any component that needs to be replaced.

• Allow at least 0.5 in (1.3 cm) clearance on top of the enclosure for cover removal.

To ensure the stability of the rack enclosure, install the heaviest equipment in the lower sections of the rack

enclosure. Install lighter equipment in the middle and upper sections.

For information about power specification and dimensions see “Specifications and Notices” on page 36.

Mounting the Engine

The Avid NEXIS Engines are designed for 19-inch (483-mm) rack configurations and need the following amounts

of space in the rack:

• Avid NEXIS | E2 and the System Director Appliance each require two vertical rack units of space

• Avid NEXIS | E4 requires four vertical rack units

The rack mount kit can accommodate racks with round, square, or threaded holes, sometimes called broadcast

racks. Installation instructions are included on a decal located on the side of one of the bracket rails.

Do not lift the Engine by the handles on the power supply units, cooling modules or Controller – they are not

designed to support the weight of the entire system.

Avid recommends that two people lift the Engine, especially when installing in upper rack units.

La pagina sta caricando ...

Avid NEXIS 6.0 Guida utente

Marca: Avid

Modello: NEXIS 6.0

Tipo: Guida utente

Scarica il pdf

rapporto

in altre lingue

English: Avid NEXIS 6.0 User guide

Avid NEXIS 6.0 Guida utente

Avid NEXIS 6.0 Guida utente

in altre lingue

Documenti correlati

Altri documenti