Audio Authority IM-HM76 Manuale utente

Categoria
Schede madri
Tipo
Manuale utente

Questo manuale è adatto anche per

IM-QM77/ HM76
MS-9899 (v1.x) Industrial Computer Board
ii
Preface
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR IN-
TERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks are the properties of their respective owners.
MSI
®
is registered trademark of Micro-Star Int’l Co.,Ltd.
NVIDIA
®
is registered trademark of NVIDIA Corporation.
ATI
®
is registered trademark of ATI Technologies, Inc.
AMD
®
is registered trademarks of AMD Corporation.
Intel
®
is registered trademarks of Intel Corporation.
Windows
®
is registered trademarks of Microsoft Corporation.
AMI
®
is registered trademark of Advanced Micro Devices, Inc.
Award
®
is a registered trademark of Phoenix Technologies Ltd.
Sound Blaster
®
is registered trademark of Creative Technology Ltd.
Realtek
®
is registered trademark of Realtek Semiconductor Corporation.
JMicron
®
is registered trademark of JMicron Technology Corporation.
Netware
®
is a registered trademark of Novell, Inc.
Revision History
Revision Revision History Date
v1.1 Modify Spec. 2012 / 11
Technical Support
If a problem arises with your system and no solution can be obtained from the
user’s manual, please contact your place of purchase or local distributor. Alterna-
tively, please try the following help resources for further guidance.
Visit the MSI website for FAQ, technical guide, BIOS updates,
driver updates, and other information:
http://www.msi.com/index.
php?func=service
Contact our technical staff at:
http://ocss.msi.com
iii
MS-9899
Safety Instructions
Always read the safety instructions carefully.
Keep this User’s Manual for future reference.
Keep this equipment away from humidity.
Lay this equipment on a reliable at surface before setting it up.
The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.
Always Unplug the Power Cord before inserting any add-on card or mod-
ule.
All cautions and warnings on the equipment should be noted.
Never pour any liquid into the opening that could damage or cause electri-
cal shock.
If any of the following situations arises, get the equipment checked by ser-
vice personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well or you can not get it work according
to User’s Manual.
The equipment has dropped and damaged.
The equipment has obvious sign of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-
TIONED, STORAGE TEMPERATURE ABOVE 60
o
C (140
o
F), IT MAY DAM-
AGE THE EQUIPMENT.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.
警告使用者:
是甲類資產品在居住的境中使用時,可會造無線電干,在種情
況下,使用者會被要求採取某些適當的對策。
廢電池請回收
For better environmental protection, waste batteries should be
collected separately for recycling special disposal.
iv
Preface
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the measures listed below.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that
may cause undesired operation.
1)
2)
CE Conf ormity
Hereby, Micro-Star International CO., LTD declares that this device is
in compliance with the essential safety requirements and other relevant
provisions set out in the European Directive.
Micro-Star International
MS-9899
v
MS-9899
WEEE (Waste Electrical and Electronic Equipment) Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI must re-
mind you that...
Under the European Union (“EU”) Directive on Waste Electrical and Electronic
Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005,
products of “electrical and electronic equipment” cannot be discarded as mu-
nicipal waste anymore and manufacturers of covered electronic equipment will be obligated
to take back such products at the end of their useful life. MSI will comply with the product
take back requirements at the end of life of MSI-branded products that are sold into the EU.
You can return these products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro-
und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat
europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Eu-
ropäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurück-
zunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich
an einer lokalen Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
En tant qu’écologiste et an de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques
et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits
électriques et électroniques ne peuvent être déposés dans les décharges ou tout simple-
ment mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer
certains produits en n de vie. MSI prendra en compte cette exigence relative au retour des
produits en n de vie au sein de la communauté européenne. Par conséquent vous pouvez
retourner localement ces matériels dans les points de collecte.
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды,
поэтому напоминаем вам, что....
В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005
года, изделия, относящиеся к электрическому и электронному оборудованию, не могут
рассматриваться как бытовой мусор, поэтому производители вышеперечисленного
электронного оборудования обязаны принимать его для переработки по окончании
срока службы. MSI обязуется соблюдать требования по приему продукции, проданной
под маркой MSI на территории EC, в переработку по окончании срока службы. Вы
можете вернуть эти изделия в специализированные пункты приема.
vi
Preface
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos
electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasicados
como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores
habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a
hacerse cargo de dichos productos al termino de su período de vida. MSI estará com-
prometido con los términos de recogida de sus productos vendidos en la Unión Europea
al nal de su periodo de vida. Usted debe depositar estos productos en el punto limpio
establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para
la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en
Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen
niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten wor-
den verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal
overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen
en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inza-
melingspunten.
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini,
MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva
2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elek-
tronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači
ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog
veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao
vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na
lokalnim mestima za prikupljanje.
POLSKI
Aby chronić nasze środowisko naturalne oraz jako rma dbająca o ekologię, MSI przy-
pomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektryc-
znych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005,
tzw. “produkty oraz wyposażenie elektryczne i elektroniczne nie mogą być traktowane
jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbi-
erania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania
UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia.
Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.
vii
MS-9899
TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kara-
rnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elek-
tronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreti-
cileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır.
Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin
geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına
bırakabilirsiniz.
ČESKY
Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků
2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické
výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se
tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení je-
jich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,
prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat
v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az
MSI emlékezteti Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elek-
tronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és
elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen
elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére
azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos
követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében,
azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed
Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla
categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come riuti
municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla ne del
suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che
sono stati venduti all’interno dell’Unione Europea alla ne del loro ciclo di vita. È possibile
portare i prodotti nel più vicino punto di raccolta
viii
Preface
CONTENTS
Copyright Notice �������������������������������������������������������������������������������������������������� ii
Trademarks ���������������������������������������������������������������������������������������������������������� ii
Revision History �������������������������������������������������������������������������������������������������� ii
Technical Support ����������������������������������������������������������������������������������������������� ii
Safety Instructions ��������������������������������������������������������������������������������������������� iii
FCC-B Radio Frequency Interference Statement �������������������������������������������� iv
CE Conf ormity ��������������������������������������������������������������������������������������������������� iv
WEEE (Waste Electrical and Electronic Equipment) Statement ��������� v
Chapter 1 Overview ������������������������������������������������������������������������������������������ 1-1
Mainboard Specications ........................................................................... 1-2
Mainboard Layout ...................................................................................... 1-4
Chapter 2 Hardware Setup������������������������������������������������������������������������������� 2-1
Quick Components Guide .......................................................................... 2-2
CPU (Central Processing Unit) .................................................................. 2-3
Back Panel I/O ...........................................................................................2-8
Connector ................................................................................................ 2-10
Jumper .....................................................................................................2-17
Slot ........................................................................................................... 2-19
Chapter 3 BIOS Setup �������������������������������������������������������������������������������������� 3-1
Entering Setup ........................................................................................... 3-2
The Menu Bar ............................................................................................ 3-4
Main ........................................................................................................... 3-5
Advanced ...................................................................................................3-6
Boot .......................................................................................................... 3-12
Security ....................................................................................................3-13
Chipset ..................................................................................................... 3-18
Power ....................................................................................................... 3-20
Save & Exit .............................................................................................. 3-22
Thank you for choosing the IM-QM77/ IM-HM76, the
excellent in-dustrial computer boards from MSI.
Based on the innovative Intel
®
QM77/ HM76 chipsets
for optimal system efciency, the IM-QM77 accommo-
dates the Intel
®
Core™i7 / i5 / i3 or Celeron
®
proces-
sor in rPGA-989 (Socket G2) and supports 2 DDR3
1067/1333/1600 DIMM slots to provide the maximum
of 16GB memory capacity.
The IM-QM77/ HM76 are durable under extreme envi-
ronments and suitable to be applied in every industrial
eld, such as digital signage, kiosk, gaming, industrial
control automation and POS.
Chapter 1
Overview
1-2
Overview
Mainboard SpecificationS
CPU
Intel
®
Core™i7 / i5 / i3 or Celeron
®
processor in
rPGA-989 (Socket G2)
Chipset
SKU1: Intel
®
QM77 Chipset
SKU2: Intel
®
HM76 Chipset
Memory
2 unbuffered non-ECC DDR3 1067/1333/1600
DIMM slots
Supports the maximum of 16GB
LAN
Intel
®
82579LM Gigabit Fast Ethernet controller
Intel
®
82583V Gigabit Fast Ethernet controller (QM77
only)
Audio
Realtek
®
ALC887 VD2-CG Codec
RAID
Supports RAID 0/ 1/ 5/ 10 (QM77)
Graphics
Graphics integrated in Intel
®
processor
2 independent displays supported by SNB
3 independent displays supported by IVB
(QM77)
-
-
Back
Panel I/O
Back Panel I/O
1 PS/2 mouse and keyboard combo port
1 serial port
1 HDMI port (QM77 only)
1 VGA port
1 DVI-D ports (QM77 only)
2 USB 3.0 ports
4 USB 2.0 ports
2 Gigabit LAN jacks (QM77) /
1 Gigabit LAN jack (HM76)
3 exible audio ports (QM77) /
2 exible audio ports (HM76)
-
-
-
-
-
-
-
-
-
1-3
MS-9899
Onboard
Connec-
tors/Pin-
headers
Onboard Connectors/Pinheaders
1 USB 3.0 pinheader (2 ports)
1 USB 2.0 pinheader (2 ports)
2 SATA 6Gb/s ports
2 SATA 3Gb/s ports
3 serial port connectors
4 serial port power jumpers (QM77)
1 serial port power jumpers (HM76)
1 front panel pinheader
1 chassis intrusion connector
1 GPIO connector
1 LVDS connector
1 LVDS power jumper
1 amplier pinheader
1 eDP port (QM77)
1 S/PDIF out pinheader
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Slot
1 PCIe x 16 slot
1 mini PCIe x 1 slot
1 mSATA 3Gb/s port
1 CFast slot (QM77)
Form Fac-
tor
Mini-ITX: 17.0cm x 17.0cm
Environ-
mental
Operating Temperature: 0
o
C to 60
o
C
Storage Temperature: -20
o
C to 80
o
C
Humidity: 0% ~ 95% RH, Non-Condensing
1-4
Overview
Mainboard Layout
Power Connector
GPIO Connector
JDP1 Connector
LVDS Power Jumper
SATA Connectors
DIMM Slots
Back Panel
Front Panel
Connector
USB 2.0 Connector
Chassis Intrusion
Connector
LVDS Connector
COMPort
Connectors
CPU Fan Connector
CPU Socket
Audio power am-
plier Connector
PCIe x16 Slot
JSPI1 Connector
COM Port
Power
Jumpers (*)
Clear
CMOS
Jumper
S/PDIF Connector
USB 3.0 Connector
Mini PCIe x1 Slot
mSATA Slot
COM Port
Power Jumper
eDP Connector (*)
CPU Power Connector
System Fan Connector
AT/ ATX
Jumper
DVI-D Port
(*)
HDMI Port
(*)
LAN
Ports
USB 3.0
Ports
Line-In (*)
COM Port
Line-Out
MIC
Keyboard / Mouse
Comob Port
D-Sub Port
USB 2.0
Ports
USB 2.0
Ports
LAN
Ports
(*)
(*) For QM77 only.
1-5
MS-9899
CFast Slot (*)
This chapter provides you with the information on
mainboard hardware congurations. Incorrect setting
of jumpers and connectors may damage your main-
board. Please pay special attention not to connect
these headers in wrong direction. DO NOT adjust any
jumper while the mainboard is powered on.
Chapter 2
Hardware Setup
2-2
Hardware Setup
Quick coMponentS Guide
JGPIO1, p2-13
PCIe Slot, p.2-19
JSPD1, p.2-15
J1, p.2-17
JPWR1, p.2-7
SATA1~4, p.2-10
DIMM Slot, p.2-6
Back Panel
I/O, p.2-8
JFP1, p.2-12
CPUFAN1, p.2-11
JUSB1, p.2-12
JCMOS1,
p.2-17
JLVDS1, p.2-11
JAMP1, p.2-14
CPU, p.2-3
JSPI1, p.2-13
JCMV2~4,
p.2-18 (*)
PWRCONN1, p.2-7
JDP1, p.2-15
J4, p.2-14
SLOT3, p.2-19
SLOT1, p.2-19
JCASE1, p2-10
COM2~4,
p.2-13
SYSFAN2, p.2-11
J2, p.2-18
CONN1, p.2-16 (*)
JATX1,
p.2-18
(*) For QM77 only.
2-3
MS-9899
cpu (centraL proceSSinG unit)
When you are installing the CPU, make sure that you install the cooler
to prevent overheating. If you do not have the CPU cooler, consult your
dealer before turning on the computer.
Important
Overheating
Overheating can seriously damage the CPU and mainboard. Always
make sure the cooling fans work properly to protect the CPU from over-
heating. Be sure to apply an even layer of thermal paste (or thermal tape)
between the CPU and the heatsink to enhance heat dissipation.
Replacing the CPU
When replacing the CPU, always turn o the system’s power supply and
unplug the power supply’s power cord to ensure the safety of the CPU.
2-4
Hardware Setup
CPU Installation
Locate the CPU socket on the mainboard. On the upper end of the CPU
socket is a socket actuator in the form of a slotted screw head.
To install the CPU, follow the steps shown below:
Loosen the socket actuator with the parallel screw driver.
Locate the golden cut edge on where the CPU should be installed.
Align the correct CPU orientation and insert the CPU into the socket.
Note that the CPU will only t in the socket when the CPU orienta-
tion is correct. Do not use force to insert the CPU into the socket,
because it will damage the golden pins of the CPU.
Fasten the CPU screw with the parallel screw driver to steady the
CPU.
Important
Mainboard photos shown in this section are for demonstration only and
may dier from the actual look of your mainboard.
1.
2.
3.
4.
2-5
MS-9899
CPU Cooler Installation
When the CPU installation is completed, please install the CPU cooler to
prevent the CPU from overheating.
Remove the sticker lm from the CPU cooler backplate.
Paste the backplate to be in line with the holes on the reverse side
of the mainboard.
Place the CPU cooler onto the mainboard.
Screw it from corner to opposite corner not left to right or top to
bottom.
Plug in the fan power cable.
1
2
3
4
1.
2.
3.
4.
5.
2-6
Hardware Setup
Memory
These DIMM slots are used fornstalling memory modules.
Unlock the DIMM slot by push-
ing the mounting clip to the side.
Vertically insert the memory
module into the DIMM slot. The
memory module has an o-cen-
ter notch on the bottom that will
only allow it to t one way into
the DIMM slot.
Push the memory module deep
into the DIMM slot. The plastic
clip at side of the DIMM slot will
automatically close when the
memory module is properly seat
and an audible click should be
heard.
Manually check if the memory
module has been locked in place
by the DIMM slot’s side clip.
Important
You can barely see the golden nger if the DIMM is properly inserted
in the DIMM slot.
To enable successful system boot-up, always insert the DIMM into the
DIMM1 rst.Power Supply
1.
2.
3.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Audio Authority IM-HM76 Manuale utente

Categoria
Schede madri
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue