BCM MX525D Manuale utente

WWW.BCMCOM.COM

User’s Manual

MX525D/DC

Industrial Mini ITX Motherboard

￭ Preface

ii

Copyright Notice

The material in this document is the intellectual property of

BCM Advanced

Research

Research. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

￭ BCM

®

is registered trademark of BCM Advanced Research.

￭ NVIDIA

®

is registered trademark of NVIDIA Corporation.

￭ ATI

®

is registered trademark of ATI Technologies, Inc.

￭ AMD

®

is registered trademarks of AMD Corporation.

￭ Intel

®

is registered trademarks of Intel Corporation.

￭ Windows

®

is registered trademarks of Microsoft Corporation.

￭ AMI

®

is registered trademark of Advanced Micro Devices, Inc.

￭ Award

®

is a registered trademark of Phoenix Technologies Ltd.

￭ Sound Blaster

®

is registered trademark of Creative Technology Ltd.

￭ Realtek

®

is registered trademark of Realtek Semiconductor Corporation.

￭ JMicron

®

is registered trademark of JMicron Technology Corporation.

￭ Netware

®

is a registered trademark of Novell, Inc.

Revision History

Revision

Revision History

Date

V1.1 08/31/2011

Technical Support

If a problem arises with your system and no solution can be obtained from

the user’s manual, please contact your place of purchase or local distributor.

Alternatively, please try the following help resources for further guidance.

￭ Visit the BCM website for technical guide, BIOS updates, driver updates,

and other information:

http://www.bcmcom.com/bcm_support_drivers.htm

◙ Contact our technical staff at:

http://www.bcmcom.com/bcm_inquiries_

techSupport.htm

iii

MX525D / MX525DC

Safety Instructions

￭ Always read the safety instructions carefully.

￭ Keep this User’s Manual for future reference.

￭ Keep this equipment away from humidity.

￭ Lay this equipment on a reliable ﬂ at surface before setting it up.

￭ The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

￭ Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

￭ Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

￭ Always Unplug the Power Cord before inserting any add-on card or module.

￭ All cautions and warnings on the equipment should be noted.

￭ Never pour any liquid into the opening that could damage or cause

electrical shock.

￭ If any of the following situations arises, get the equipment checked by

service personnel:

◯ The power cord or plug is damaged.

◯ Liquid has penetrated into the equipment.

◯ The equipment has been exposed to moisture.

◯ The equipment does not work well or you can not get it work according

to User’s Manual.

◯ The equipment has dropped and damaged.

◯ The equipment has obvious sign of breakage.

￭ DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60

o

C (140

o

F), IT

MAY DAMAGE THE EQUIPMENT.

CAUTION

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情

況下，使用者會被要求採取某些適當的對策。

廢電池請回收

For better environmental protection, waste batteries should be

collected separately for recycling or special disposal.

￭ Preface

iv

FCC-B Radio Frequency Interference Statement

This equipment has been tested and

found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed

to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the measures listed below.

◯ Reorient or relocate the receiving antenna.

◯ Increase the separation between the equipment and receiver.

◯ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

◯ Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modiﬁ cations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that

may cause undesired operation.

BCM Advanced Research

MX525D / MX525DC

v

MX525D / MX525DC

WEEE (Waste Electrical and Electronic Equipment) Statement

ENGLISH

To protect the global environment and as an environmentalist, BCM must re-

mind you that:

Under the European Union (“EU”) Directive on Waste Electrical and Electronic

Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005,

products of “electrical and electronic equipment” cannot be discarded as municipal waste

anymore and manufacturers of covered electronic equipment will be obligated to take back

such products at the end of their useful life. BCM will comply with the product take back

requirements at the end of life of BCM-branded products that are sold into the EU. You can

return these products to local collection points.

DEUTSCH

Hinweis von BCM zur Erhaltung und Schutz unserer Umwelt

Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro-

und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. BCM hat

europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Eu-

ropäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurück-

zunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich

an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et aﬁ n de protéger l’environnement, BCM tient à rappeler ceci:

Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques

et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits

électriques et électroniques ne peuvent être déposés dans les décharges ou tout simple-

ment mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer

certains produits en ﬁ n de vie. BCM prendra en compte cette exigence relative au retour

des produits en ﬁ n de vie au sein de la communauté européenne. Par conséquent vous

pouvez retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания BCM предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что:

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005

года, изделия, относящиеся к электрическому и электронному оборудованию, не могут

рассматриваться как бытовой мусор, поэтому производители вышеперечисленного

электронного оборудования обязаны принимать его для переработки по окончании

срока службы. BCM обязуется соблюдать требования по приему продукции,

проданной под маркой BCM на территории EC, в переработку по окончании срока

службы. Вы можете вернуть эти изделия в специализированные пункты приема.

￭ Preface

vi

ESPAÑOL

BCM como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos

electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasiﬁ cados

como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores

habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a

hacerse cargo de dichos productos al termino de su período de vida. BCM estará com-

prometido con los términos de recogida de sus productos vendidos en la Unión Europea

al ﬁ nal de su periodo de vida. Usted debe depositar estos productos en el punto limpio

establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para

la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil BCM u eraan herinneren dat:

De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en

Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet

meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verpli-

cht om producten retour te nemen aan het eind van hun levenscyclus. BCM zal overeenk-

omstig de richtlijn handelen voor de producten die de merknaam BCM dragen en verkocht

zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini,

BCM mora da vas podesti da:

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva

2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elek-

tronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove

opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka

trajanja. BCM će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek

trajanja, koji imaju BCM oznaku i koji su prodati u EU. Ove proizvode možete vratiti na

lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako ﬁ rma dbająca o ekologię, BCM przy-

pomina, że:

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektryc-

znych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005,

tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane

jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbi-

erania ich w momencie gdy produkt jest wycofywany z użycia. BCM wypełni wymagania

UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia.

Produkty BCM będzie można zwracać w wyznaczonych punktach zbiorczych.

vii

MX525D / MX525DC

TÜRKÇE

Çevreci özelliğiyle bilinen BCM dünyada çevreyi korumak için hatırlatır:

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kara-

rnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elek-

tronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreti-

cileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır.

Avrupa Birliği’ne satılan BCM markalı ürünlerin kullanım süreleri bittiğinde BCM ürünlerin

geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına

bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost BCM upozorňuje:

Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků

2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické

výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se

tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení je-

jich životnosti. Společnost BCM splní požadavky na odebírání výrobků značky BCM,

prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat

v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az

BCM emlékezteti Önt, hogy:

Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elek-

tronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és

elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen

elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére

azok hasznos élettartama végén. Az BCM betartja a termékvisszavétellel kapcsolatos

követelményeket az BCM márkanév alatt az EU-n belül értékesített termékek esetében,

azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, BCM, da sempre amica della natura, ti ricorda che:

In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed

Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla

categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come riﬁ uti

municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla ﬁ ne del

suo ciclo di vita. BCM si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati BCM che

sono stati venduti all’interno dell’Unione Europea alla ﬁ ne del loro ciclo di vita. È possibile

portare i prodotti nel più vicino punto di raccolta

￭ Preface

viii

CONTENTS

Copyright Notice ........................................................................................ii

Trademarks ................................................................................................ii

Revision History ........................................................................................ii

Technical Support .....................................................................................ii

Safety Instructions ...................................................................................iii

FCC-B Radio Frequency Interference Statement ..................................iv

WEEE (Waste Electrical and Electronic Equipment) Statement ...........v

Chapter 1 Overview ............................................................................... 1-1

Mainboard Speciﬁ cations ................................................................ 1-2

Mainboard Layout ........................................................................... 1-4

Chapter 2 Hardware Setup.................................................................... 2-1

Quick Components Guide ............................................................... 2-2

Memory ........................................................................................... 2-3

Power Supply .................................................................................. 2-4

Back Panel I/O ................................................................................ 2-5

Connector ....................................................................................... 2-8

Jumper .......................................................................................... 2-16

Slot ................................................................................................ 2-19

Chapter 3 BIOS Setup ........................................................................... 3-1

Entering Setup ................................................................................ 3-2

The Menu Bar ................................................................................. 3-4

Main ................................................................................................ 3-5

Advanced ........................................................................................ 3-7

Boot ............................................................................................... 3-13

Security ......................................................................................... 3-14

Chipset .......................................................................................... 3-16

Power ............................................................................................ 3-17

Exit ................................................................................................ 3-19

Chapter 4 System Resources ............................................................... 4-1

AMI POST Code ............................................................................. 4-2

Resource List .................................................................................. 4-6

GPIO Programming ........................................................................ 4-8

Chapter 1

Overview

The MX525D / MX525DC is an Intel® Low-power Mini ITX

Motherboard featuring Intel® Atom™ D525 1.8 GHz Dual Core

processor onboard and supporting DDR3 SODIMM memory

modules. The MX525D is the ATX Power version; the MX525DC

is the DC Power verion.

Based on the innovative Intel

®

ICH8M chipset for optimal

system efﬁ ciency, the IM-PV-C accommodates the Intel

®

Pineview D, Dual core D525, processor and supports 2 DDR3

800MHz SO-DIMM slots to provide the maximum of 4GB

memory capacity.

In the entry-level and mid-range market segment, the MX525D

/ MX525DC provides a high-performance solution for today’s

front-end and general purpose workstation, as well as in the

future.

1

￭ Overview

1-2

MX525D / MX525DC SPECIFICATIONS

CPU ■ Intel® Atom™ D525 1.8 GHz Dual Core low-power

processor onboard with 533 MHz FSB

Chipset ■ Intel® ICH8M Chipset

Memory ■ Supports two 204-pin SO-DIMM DDR3 800 MHz

memory module up to 4 GB

LAN ■ LAN 1: Intel® 82567V PHY Gigabit LAN Controller

■ LAN 2: Intel® 82574L Gigabit LAN Controller

Audio ■ Realtek® ALC887-VD2-GR HD Audio

■ Line-out, Mic-in, Line-in, 3 Watt x 2 Ampliﬁ er

Graphics ■ Intel® GMA 3150 Graphic Engine, DirectX 9.0C

Expansion

Interface

■ 1 x Mini PCI Express

■ 1 x PCI slot

■ 1 x Compact Flash socket

Back I/O

Panel

■ COM Ports: 1 x RS-232/422/485, 1 x RS-232

■ VGA: 1 x DB-15

■ DVI: 1 x DVI-D

■ LAN: 2 x RJ-45

■ USB: 4 x USB

■ Audio: 1 x 3-jacks Audio connector

Onboard I/O

Headers

■ SATA: 3 x SATA Power Headers

■ USB: 2 x USB Headers (4 Ports)

■ COM Ports: 4 x RS-232 Headers

■ Ampliﬁ er: 1 x Ampliﬁ er

■ LVDS: 1 x LVDS Header

■ Inverter: 1 x Inverter Header

■ Fan: 2 x Fan Headers

Form Factor ■ Mini-ITX: 170mm x 170mm

Power Type ■ MX525D: 20-pin ATX Power

■ MX525DC: 4-pin DC Power ranging from 12V, 14~24V

Mechanical

and

Environment

■ Operating Temperature: -10

o

C to 60

o

C

■ Storage Temperature: -20

o

C to 80

o

C

■ Humidity: 0% ~ 95% RH, Non-Condensing

MX525D / MX525DC

1-3

Mainboard Layout

SATA Connector

Chassis

Intrusion

Connector

LVDS Connector

PCI Slot

Clear CMOS Jumper

Serial Port

Connector

Keyboard/Mouse

Connector

Parallel Port

Connector

Amplier Connector

ATX Power

Connector

(Optional)

DIMM Slot

Front Panel

Connector

Front USB

Connector

Fan Power

Connector

LVDS Inverter

Connector

Mini PCIe Slot

GPIO Connector

DC Power

Connector

(Optional)

SATA Power

Connector

(Optional)

CF Mode Jumper

COM Power

Select Jumper

CF Power Select

Jumper

AT/ATX Power

Select Jumper

SPDIF out Connector

Front Audio

Connector

Serial Port RS-232/422/485

DVI-I Port

VGA Port

LAN Jack

USB 2.0 Ports

Line-In Jack

Line-Out Jack

Mic Jack

LAN Jack

USB 2.0 Ports

Serial Port RS-232

Hardware Setup

This chapter provides you with the information on mainboard

hardware conﬁ gurations. Incorrect setting of jumpers and

connectors may damage your mainboard. Please pay special

attention not to connect these headers in wrong direction. DO NOT

adjust any jumper while the mainboard is powered on.

2

Chapter 2

￭ Hardware Setup

2-2

Quick Components Guide

SATA Connector,

p.2-8

Chassis Intrusion Connector,

p.2-8

LVDS Connector, p.2-14

PCI Slot,

p.2-19

Clear CMOS Jumper,

p.2-17

Serial Port Connector, p.2-13

Keyboard/Mouse

Connector, p.2-10

Parallel Port Connector, p.2-12

Amplier Connector,

p.2-9

ATX Power Connector

(Optional), p.2-4

DIMM Slot, p.2-3

Front Panel

Connector,

p.2-10

USB

Connector,

p.2-11

Fan Power

Connector,

p.2-17

LVDS Inverter Connector,

p.2-14

Mini PCIe Slot,

p.2-19

GPIO Connector,

p.2-12

DC Power Connector

(Optional), p.2-4

SATA Power

Connector

(Optional), p.2-4

CF Mode Jumper,

p.2-18

COM Power Select

Jumper, p.2-17

CF Power Select

Jumper, p.2-18

AT/ATX Power

Select Jumper,

p.2-18

SPDIF out Connector,

p.2-15

Front Audio Connector,

p.2-15

Serial Port RS-232/422/485

Back I/O, p.2-5

DVI-I Port

VGA Port

LAN Jack

USB 2.0 Ports

Line-In Jack

Line-Out Jack

Mic Jack

LAN Jack

USB 2.0 Ports

Serial Port RS-232

MX525D / MX525DC

2-3

Memory

Installing Memory Modules

1. Locate the SO-DIMM slot. Align the notch on the DIMM with the key on

the slot and insert the DIMM into the slot.

2. Push the DIMM gently downwards until the slot levers click and lock

the DIMM in place.

3. To uninstall the DIMM, ﬂ ip the slot levers outwards and the DIMM will

be released instantly.

Important

You can barely see the golden ﬁ nger if the memory module is properly in-

serted in the DIMM slot.

￭ Hardware Setup

2-4

ATX Power Connector: ATX1 ATX Version

This ATX connector provides power to the system.

13.+3.3

V

1.+3.3V

14.-12V

2.+3.3V

15.Ground

3.Ground

16.PS-ON#

4.+5V

17.Ground

5.Ground

18.Ground

6.+5V

19.Ground

7.Ground

22.+5V

10.+12V

20.Res

8.PWR OK

23.+5V

11.+12V

21.+5V

9.5VSB

24.Ground

1

2.+3.3V

DC Power Connector: JPWR1 DC Version

This DC-In connector provides 12V/19V/24V power input.

4.DC

P

owe

r

2.Ground

3.DC

P

owe

r

1

.Ground

SATA Power Connector: JPWR2, JPWR3 DC Version

This DC-In connector provides DC power output for SATA devices.

4+12V

3.GND

2.GND

1.VCC

5

Power Supply

MX525D / MX525DC

2-5

Back Panel I/O

▶ RS-232/422/485 Serial Port Connector

The serial port is a 16550A high speed communications port that sends/

receives 16 bytes FIFOs. You can attach a serial mouse or other serial de-

vices directly to the connector.

PIN SIGNAL DESCRIPTION

1

2

3

4

5

6

7

8

9

DCD

RXD

TXD

DTR

GND

DSR

RTS

CTS

VCC_COM1

or RING

Data Carrier Detect

Receive Data

Transmit Data

Data Terminal Ready

Signal Ground

Data Set Ready

Request To Send

Clear To Send

Voltage output or

RING select setting by

JCOM1_PIN9_SEL1,

Voltage select setting

by JCOMP1

RS-232

Serial Port RS-232/422/485

DVI-I Port

VGA Port

LAN Jack

USB 2.0 Ports

Line-In Jack

Line-Out Jack

Mic Jack

LAN Jack

USB 2.0 Ports

Serial Port RS-232

￭ Hardware Setup

2-6

PIN SIGNAL DESCRIPTION

1

2

3

4

5

6

7

8

9

422 TXD-

422 RXD+

422 TXD+

422 RXD-

GND

NC

Transmit Data, Negative

Receive Data, Positive

Transmit Data, Positive

Receive Data, Negative

Signal Ground

No Connection

RS-422

PIN SIGNAL DESCRIPTION

1

2

3

4

5

6

7

8

9

485 TXD-

NC

485 TXD+

NC

GND

NC

Transmit Data, Negative

No Connection

Transmit Data, Positive

No Connection

Signal Ground

No Connection

RS-485

▶ VGA Port

The DB15-pin female connector is provided for monitor.

▶ DVI-I Port

The DVI-I (Digital Visual Interface-Integrated) connector allows you to con-

nect an LCD monitor. It provides a high-speed digital interconnection be-

tween the computer and its display device. To connect an LCD monitor, sim-

ply plug your monitor cable into the DVI connector, and make sure that the

other end of the cable is properly connected to your monitor (refer to your

monitor manual for more information.)

MX525D / MX525DC

2-7

▶ USB 2.0 Port

The USB (Universal Serial Bus) port is for attaching USB devices such as

keyboard, mouse, or other USB-compatible devices.

▶ LAN Jack

The standard RJ-45 LAN jack is for connection to the Local Area Network

(LAN). You can connect a network cable to it.

Speed IndicatorActivity Indicator

Left LED Right LED

Active LED 100M/1000M Speed LED

LED Color

Yellow

Green

Green/

Orange

10M Cable

Plug-in

No Transmission

Yellow

Yellow (Lighting) OFF

Transmission

Yellow

Yellow (Blinking) OFF

100M Cable

Plug-in

No Transmission

Yellow

Yellow (Lighting)

Green

Green (Lighting)

Transmission

Yellow

Yellow (Blinking)

Green

Green (Lighting)

1000M Cable

Plug-in

No Transmission

Yellow

Yellow (Lighting)

Orange

Orange (Lighting)

Transmission

Yellow

Yellow (Blinking)

Orange

Orange (Lighting)

In S3/S4/S5 Standby State

Yellow

Yellow (Lighting) OFF

▶ Audio Ports

■ Line-In (Blue) - Line In, is used for external CD player, tapeplayer

or other audio devices.

■ Line-Out (Green) - Line Out, is a connector for speakers or head-

phones.

■ Mic (Pink) - Mic, is a connector for microphones.

￭ Hardware Setup

2-8

Connector

Chassis Intrusion Connector: JCI1

This connector is provided to connect the chassis intrusion switch cable. If

the chassis is opened, the chassis intrusion mechanism will be activated.

The system will record this status and show a warning message on the

screen. To clear the warning, you must enter the BIOS utility and clear the

record.

1

.

C

I

N

T

R

U

2

.

G

r

o

u

n

d

Serial ATA Connector: SATA1 ~ SATA3

This connector is a high-speed Serial ATA interface port. Each connector

can connect one Serial ATA device.

Important

Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,

data loss may occur during transmission.

MX525D / MX525DC

2-9

Audio Ampliﬁ er Connector: JAMP1

The JAMP1 is used to connect audio ampliﬁ ers to enhance audio perfor-

mance.

2.AMP_L+

1.AMP_

L

-

4.AMP_R

+

3.AMP_R-

Fan Power Connector: CPUFAN1, SYSFAN1

The fan power connector supports system cooling fan with +12V. When

connecting the wire to the connectors, always note that the red wire is the

positive and should be connected to the +12V; the black wire is Ground and

should be connected to GND. If the mainboard has a System Hardware

Monitor chipset onboard, you must use a specially designed fan with speed

sensor to take advantage of the CPU fan control.

1

.

G

r

o

u

n

d

2

.

+

1

2

V

3

.

S

e

n

s

o

r

4

.

C

o

n

t

r

o

l

Important

• Please refer to the recommended CPU fans at processor’s ofﬁ cial web-

site or consult the vendors for proper CPU cooling fan.

• Fan cooler set with 3- or 4-pin power connector are both available for

CPUFAN1.

La pagina si sta caricando...

BCM MX525D Manuale utente

Questo manuale è adatto anche per

BCM MX525D Manuale utente

in altre lingue

Documenti correlati

Altri documenti